Samsung Electronics Co SIP0P5WRS50 ARTIK055s User Manual Samsung ARTIK ation

Samsung Electronics Co Ltd ARTIK055s Samsung ARTIK ation

User Manual

SIP0P5WRS50
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 2 Samsung’s ARTIK™ Module is a highly integrated module for secure Internet of Things (IoT) devices that require Wi-Fi. It is based on an ARM® Cortex® R4 core with on-chip memories, an ARM® Cortex® M0+ core, a complete 2.4GHz Wi-Fi Phy, MAC layer processing, a large complement of standard digital buses including audio (I2S), and power management. The module is packaged with additional external Flash memory, a hardware Secure Element and a single integrated 2.4GHz structural antenna. The application processor is fully available for applications since the Wi-Fi stack, through the MAC layer, is handled by a co-processor. Aimed especially at power-sensitive devices needing Wi-Fi, the SIP0P5WRS50 Module provides excellent performance in a variety of environments, with a feature set tailored specifically for IoT end nodes. Top View (Image is preliminary and will change) SIP0P5WRS50 Module Block Diagram Processor CPU ARM® Cortex® R4, 32-bit with 32KB I-Cache and 32KB D-Cache @ 320MHz WLAN CPU ARM Cortex M0+ @ 320MHz Memory Embedded ROM 64KB User Embedded RAM 1.25MB 128KB (Shared) FLASH 8MB SPI FLASH on Module Security Secure Element Secure point to point authentication and data transfer Radio WLAN IEEE802.11™ b/g/n 2.4GHz radio Power Management Single Supply Provides all power of the SIP0P5WRS50 Module using 3.3V Interfaces Digital I/O UART, I2C, I2S, SPI, PWM and GPIO SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND SPECIFICATIONS WITHOUT NOTICE. Products and specifications discussed herein are for reference purposes only. All information discussed herein is provided on an "AS IS" basis, without warranties of any kind. This document and all information discussed herein remain the sole and exclusive property of Samsung Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property right is granted by one party to the other party under this document, by implication, estoppel or other-wise. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. For updates or additional information about Samsung products, contact your nearest Samsung office. All brand names, trademarks and registered trademarks belong to their respective owners. ARTIK 051 MODULERADIOSECURITYPROCESSORPOWER MGT. MEMORYINTERFACES
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 3 TABLE OF CONTENTS Table of Contents ................................................................................................................................................................... 3 List of Figures .......................................................................................................................................................................... 4 List of Tables ........................................................................................................................................................................... 4 Version History ...................................................................................................................................................................................... 5 SIP0P5WRS50 Module Block Diagram and Component Placement ................................................................................ 6 SIP0P5WRS50 Module Wi-Fi Interface ................................................................................................................................................ 6 SIP0P5WRS50 Module Memory ........................................................................................................................................................... 6 SIP0P5WRS50 Module Power Management Unit .............................................................................................................................. 7 SIP0P5WRS50 Module Security Subsystem ........................................................................................................................................ 7 SIP0P5WRS50 Module ADC Interface .................................................................................................................................................. 7 SIP0P5WRS50 Module UART Interface ................................................................................................................................................ 8 SIP0P5WRS50 Module GPIO Interface ................................................................................................................................................ 8 SIP0P5WRS50 INT Interface ................................................................................................................................................................. 8 SIP0P5WRS50 Module I2C Interface .................................................................................................................................................... 9 SIP0P5WRS50 Module SPI Interface.................................................................................................................................................... 9 SIP0P5WRS50 Module PWM Interface ................................................................................................................................................ 9 SIP0P5WRS50 Module I2S Interface .................................................................................................................................................... 9 SIP0P5WRS50 Module Processor System ........................................................................................................................................... 9 SIP0P5WRS50 Module Edge Connector ............................................................................................................................ 10 SIP0P5WRS50 Functional Interfaces .................................................................................................................................. 13 ADC Interface ....................................................................................................................................................................................... 13 Debug Interface ................................................................................................................................................................................... 13 GPIO Interface ..................................................................................................................................................................................... 13 I2C Interface ......................................................................................................................................................................................... 14 INT Interface ........................................................................................................................................................................................ 14 Power Interface ................................................................................................................................................................................... 14 PWM Interface ..................................................................................................................................................................................... 14 Reset Interface ..................................................................................................................................................................................... 15 SPI Interface ........................................................................................................................................................................................ 15 UART Interface ..................................................................................................................................................................................... 15 SIP0P5WRS50 Module GPIO Alternate Functions ............................................................................................................ 16 SIP0P5WRS50 Module Booting Sequence......................................................................................................................... 18 SIP0P5WRS50 Module Wi-Fi Antenna structure ............................................................................................................... 19 SIP0P5WRS50 Module Electrical Specifications ................................................................................................................ 19 Absolute Maximum Rating ................................................................................................................................................................. 20 DC Electrical Characteristics .............................................................................................................................................................. 20 DC Module Use Case Characteristics ................................................................................................................................................ 21 Power Supply Requirements .............................................................................................................................................................. 21 ESD Ratings .......................................................................................................................................................................................... 21 RF Electrical Characteristics ............................................................................................................................................................... 21 SIP0P5WRS50 Module Mechanical Specifications ........................................................................................................... 22 SIP0P5WRS50 Module FCC Certification ........................................................................................................................... 23 SIP0P5WRS50 Module Ordering Information ................................................................................................................... 24 Legal Information ................................................................................................................................................................. 25
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 4 LIST OF FIGURES Figure 1. SIP0P5WRS50 Module Block Diagram ................................................................................................................... 6 Figure 2. ADC LSB behavior .................................................................................................................................................... 8 Figure 3. SIP0P5WRS50 Module Edge Connector ............................................................................................................. 10 Figure 4. Booting and Reset Timing Relations ................................................................................................................... 18 Figure 5. RF Connector for Wi-Fi Antenna ............................................................ 오류! 책갈피가 정의되어 있지 않습니다. Figure 6. SIP0P5WRS50 Module Mechanical Dimensions ................................................................................................ 22 LIST OF TABLES Table 1. SIP0P5WRS50 Module Edge Connector Table Signal Descriptions .................................................................. 10 Table 2. ADC Interface .......................................................................................................................................................... 13 Table 3. Debug Interface ...................................................................................................................................................... 13 Table 4. GPIO Interface ......................................................................................................................................................... 13 Table 5. I2C Interface ............................................................................................................................................................. 14 Table 6. Interrupt Interface .................................................................................................................................................. 14 Table 7. PWM Interface......................................................................................................................................................... 14 Table 8. Reset Interface ........................................................................................................................................................ 15 Table 9. SPI Interface ............................................................................................................................................................ 15 Table 10. UART Interface ...................................................................................................................................................... 15 Table 11. Alternate functions of the SIP0P5WRS50 Module............................................................................................ 16 Table 12. Absolute Maximum Ratings ................................................................................................................................ 20 Table 13. I/O DC Electrical Characteristics(PAD:5,6,14-26,29-31,33-42,44-73, IO) ........................................................ 20 Table 14. I/O DC Electrical Characteristics(PAD:2-5, ADC) ............................................................................................... 20 Table 15. Recommended Operating Conditions ............................................................................................................... 21 Table 16. I/O Drive Strength ................................................................................................................................................ 21 Table 17. ESD Ratings ........................................................................................................................................................... 21
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 5 VERSION HISTORY Revision Date Description Maturity V0.1 07/26/2017 First Draft SIP0P5WRS50 Module Datasheet Pre Alpha V0.11 8/24/2017 Add legal information Pre Alpha V0.12 8/30/2017 Fix typos Pre Alpha
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 6 SIP0P5WRS50 MODULE BLOCK DIAGRAM AND COMPONENT PLACEMENT Figure 1 shows the functional Block Diagram of the SIP0P5WRS50 Module. Figure 1. SIP0P5WRS50 Module Block Diagram SIP0P5WRS50 MODULE WI-FI INTERFACE The SIP0P5WRS50 Module has an 802.11b/g/n Wi-Fi subsystem. The most important hardware features of the Wi-Fi system are:  802.11b/g/n support @ 2.4GHz  20MHz SISO (802.11n)  UDP throughput up to 50Mbps  WPA/WPA2/WAPI with WEP/TKIP implemented in software  Dedicated Wi-Fi Processor Sub System o ARM® Cortex® R4 Processor @ 480 MHz o Operating frequency of 320MHz o 32KB I-Cache o 16KB D-Cache o Tightly Coupled Memory (32KB Code Memory/32KB Data Memory) o SRAM 96KB SIP0P5WRS50 MODULE MEMORY The SIP0P5WRS50 Module has a memory subsystem with the following hardware features:  Internal RAM for secure boot, secure OS and general purpose operations. o 1280KB dedicated RAM User DomainUARTPWMSPIGPIODEBUGI2SPROCESSORCORTEX R432KB I$32KB D$BRIDGECRYPTOACCELERATORDMATCMRAM/ ROM32KB/ 32KBBRIDGEWLAN CO-PROCESSOR32KB I-Cache, 16KB D-Cache96KB SRAM80 2.11 MACWLAN DOMAIN2.4GHz RADIORTCPMUPLLLDO BRIDGE80 2.11 PHYI2C1.25MB SRAM128KB SRAM64KB ROMUART <-> USBPMIC
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 7 o 128KB shared RAM  Internal ROM for secure boot and secure OS operations. o 64KB dedicated ROM SIP0P5WRS50 MODULE POWER MANAGEMENT UNIT The SIP0P5WRS50 Module has one universal power management unit that controls the state of power on the SIP0P5WRS50 Module. The most important features of the PMU are:  Fine granular power control o Through the use of power domains  System level power control o Deep stop mode o Sleep power mode  Power savings techniques o Frequency scaling o Clock gating o Power gating SIP0P5WRS50 MODULE SECURITY SUBSYSTEM The SIP0P5WRS50 Module has a dedicated security subsystem to ensure a secure end to end operation in any IoT environment. The most important features of the SIP0P5WRS50 Module security subsystem are:  Isolated Execution Environment o Isolated Cortex-M0 processor o 8KB ROM for secure booting o 32KB secure SRAM o Dedicated secure DMA channel for secure backup/restore of SRAM content o Secure Mailbox (68x32b wide) for secure communication o Isolated key support  Backup encryption key 256-bits  SSS root private key 521-bits  Storage key 256-bits  Symmetric key engines o Secure AES o Secure DES/Triple-DES  Stream cipher engine o ARC4 engine  Various Hash engines o SHA-1/SHA2-256/ SHA2-384/ SHA2-512/MD5 HMAC  Asymmetric key engines o PKA (Public Key Accelerator) engine  PRNG (Pseudo Random Number Generator)  DTRNG (Digital True RNG)  Secure timer  Secure key manager  DMA Support, Descriptor DMA  Block ciphers + hashing  Retention reset scheme SIP0P5WRS50 MODULE ADC INTERFACE The SIP0P5WRS50 Module has one 4-channel selectable analog to digital converter. The most important hardware features of the A/D interface are:  Programmable 4-channel selection
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 8  Main ADC clock at 6.5MHz  Conversion clock ADC at 1.08MHz  Support for selectable conversion mode: 1, 2, 4, 8, 16, 32, 64  Differential non-linearity error ±2 LSB  Integral non-linearity error ±6 LSB  Top offset error ±10 LSB  Bottom offset error ±10 LSB Figure 2 depicts the dynamic behavior between input voltage on the ADC and resulted LSB value in the ADC register. Figure 2. ADC LSB behavior SIP0P5WRS50 MODULE UART INTERFACE By default the SIP0P5WRS50 Module has three, 2-pin UART interfaces. Using GPIOs that are currently used for other functionality you can potentially create two 4-pin UART interfaces. The most important hardware features of the UART interface is:  The UART can be operated in DMA or interrupt-based mode  Support for 5-bit, 6-bit, 7-bit or 8-bit serial data transmit and receive  Programmable baud rate  One or two stop bit insertion SIP0P5WRS50 MODULE GPIO INTERFACE The SIP0P5WRS50 Module has an extensive general purpose Input/Output interface. The most important features of the SIP0P5WRS50 Module GPIO interface are:  Support for 62 multi-function input output ports.  Support for 27 dedicated GPIO ports  Control of 16 external interrupts SIP0P5WRS50 INT INTERFACE The SIP0P5WRS50 Module is equipped with an interrupt controller. The most important features of the SIP0P5WRS50 Module Interrupt Interface are:  Enable, disable and generate interrupts from peripheral sources  Software generated interrupts  Interrupt masking and prioritization Result (LSB)Analog in (V)Top offsetBottom offsetReal valueIdeal valueIdeal value with offset
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 9  Wake-up events for power management  Control of 3 external wakeup interrupts SIP0P5WRS50 MODULE I2C INTERFACE By default the SIP0P5WRS50 Module has two high speed multi-master I2C interfaces available with speeds up to 3.4Mbps. Using GPIOs that are currently used for other functionality you can potentially create four I2C interfaces. SIP0P5WRS50 MODULE SPI INTERFACE By default the SIP0P5WRS50 Module has two dedicated SPI interfaces. Using GPIOs that are currently used for other functionality you can potentially create four SPI interfaces. The most important hardware features of the SPI interfaces are:  Full duplex communication  8, 16 or 32-bit shift registers and bus interface  Motorola SPI protocol and National Semiconductor Microwire protocol  Master and slave mode operation  Two independent 32-bit wide transmit/receive FIFOs  Transmit and receive speeds up to 50MHz SIP0P5WRS50 MODULE PWM INTERFACE By default the SIP0P5WRS50 Module has seven PWM timers available. The most important features of the PWM interfaces are:  32-bit size timers on each PWM signal  Two 8-bit pre-scalers (first level of division) and 5 clock-dividers/multiplexers for second level division  Static configuration option  Dynamic configuration option  Auto-reload and One-shot pulse mode  Dead zone generator  Level interrupt generation SIP0P5WRS50 MODULE I2S INTERFACE By default the SIP0P5WRS50 Module does not have an I2S interface, however when re-using the right GPIO pins one I2S interface can be allocated. The most important features of the I2S interface are:  Stereo channel support with external DMA based operation  Mixes up to two sound sources  Support for serial data transfer of 8, 16 or 32-bit per channel  Support for slave mode SIP0P5WRS50 MODULE PROCESSOR SYSTEM The ARTIK 51 Module has one dedicated Cortex®-R4 processor dedicated towards application processing. The main features of the main processor are:  Cortex® R4 ARM® processor  CPU speed 320MHz  32kB Instruction cache  32kB Data cache
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 10 SIP0P5WRS50 MODULE EDGE CONNECTOR The SIP0P5WRS50 Module utilizes 74 signals and ground pins providing all the relevant signaling. Figure 3 shows how the Edge Connector is oriented and how signal-coordinates are assigned to the edge of the SIP0P5WRS50 Module. Table 1 describes the relation between the edge coordinates and the signal names. Figure 3. SIP0P5WRS50 Module PAD map Table 1. SIP0P5WRS50 Module Edge Connector Table Signal Descriptions Pin No. Pin Name GPIO Function1 Function2 I/O PUD POWER Grp GPIO 1 GND 2 XADC0AIN_1 - - AVDD18_ADC0 ADC 3 XADC0AIN_0 - - AVDD18_ADC0 ADC 4 XADC0AIN_2 - - AVDD18_ADC0 ADC 5 XADC0AIN_3 - - AVDD18_ADC0 ADC 6 XGPIO22 I PD VDDQ1833_SDIO_0 GPG2 GPG2[6] GPIO 7 XGPIO23 I PD VDDQ1833_SDIO_0 GPG2 GPG2[7] GPIO 8 XRESET_N I - VDDQ33_EXT1 System Reset 9 XJTAG_TRST_N I PD VDDQ33_EXT1 ETC0 ETC0[0] JTAG 10 XJTAG_TMS I PU VDDQ33_EXT1 ETC0 ETC0[1] JTAG 11 XJTAG_TCK I PD VDDQ33_EXT1 ETC0 ETC0[2] JTAG 12 XJTAG_TDO I PD VDDQ33_EXT1 ETC0 ETC0[4] JTAG 13 XJTAG_TDI I PU VDDQ33_EXT1 ETC0 ETC0[3] JTAG
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 11 14 XEINT0 I PD VDDQ33_EXT1 GPA0 GPA0[0] External Interrupt 15 XEINT2 I PD VDDQ33_EXT1 GPA0 GPA0[2] External Interrupt 16 XEINT1 I PD VDDQ33_EXT1 GPA0 GPA0[1] External Interrupt 17 XI2C0_SCL I PD VDDQ33_EXT1 GPA1 GPA1[0] HSI2C_0_SCL 18 XI2C0_SDA I PD VDDQ33_EXT1 GPA1 GPA1[1] HSI2C_0_SDA 19 XI2C1_SCL I PD VDDQ33_EXT1 GPA1 GPA1[2] HSI2C_1_SCL 20 XI2C1_SDA I PD VDDQ33_EXT1 GPA1 GPA1[3] HSI2C_1_SDA 21 XUART0_RXD I PD VDDQ33_EXT1 GPA2 GPA2[0] UART0_RXD 22 XUART0_TXD I PD VDDQ33_EXT1 GPA2 GPA2[1] UART0_TXD 23 XDEBUG_RXD I PD VDDQ33_EXT1 GPA3 GPA3[0] XDEBUG_RXD 24 XDEBUG_TXD I PD VDDQ33_EXT1 GPA3 GPA3[1] XDEBUG_TXD 25 XPWMTOUT_5 I PD VDDQ33_EXT0 GPP2 GPP2[6] PWMTOUT_5 26 XPWMTOUT_4 I PD VDDQ33_EXT0 GPP2 GPP2[5] PWMTOUT_4 27 3V3_EXT_LDO2 28 3V3_EXT_LDO2 29 XPWMTOUT_3 I PD VDDQ33_EXT0 GPP2 GPP2[3] PWMTOUT_3 30 XPWMTOUT_2 I PD VDDQ33_EXT0 GPP2 GPP2[2] PWMTOUT_2 31 XPWMTOUT_1 I PD VDDQ33_EXT0 GPP2 GPP2[1] PWMTOUT_1 UART_3_RTSn 32 GND 33 XPWMTOUT_0 I PD VDDQ33_EXT0 GPP2 GPP2[0] PWMTOUT_0 UART_3_CTSn 34 XGPIO27 I PD VDDQ33_EXT0 GPG3 GPG3[3] GPIO 35 XSPI0_CLK I PD VDDQ33_EXT0 GPP0 GPP0[0] SPI0_CLK 36 XSPI0_MOSI I PD VDDQ33_EXT0 GPP0 GPP0[3] SPI0_MOSI 37 XSPI0_CSN I PD VDDQ33_EXT0 GPP0 GPP0[1] SPI0_CSN 38 XSPI0_MISO I PD VDDQ33_EXT0 GPP0 GPP0[2] SPI0_MISO 39 XUART1_RXD I PD VDDQ33_EXT0 GPP0 GPP0[4] UART1_RXD UART_2_CTSn 40 XUART1_TXD I PD VDDQ33_EXT0 GPP0 GPP0[5] UART1_TXD UART_2_RTSn 41 XUART2_RXD I PD VDDQ33_EXT0 GPP0 GPP0[6] UART2_RXD 42 XUART2_TXD I PD VDDQ33_EXT0 GPP0 GPP0[7] UART2_TXD 43 GND 44 XUART3_RXD I PD VDDQ33_EXT0 GPP1 GPP1[6] UART3_RXD 45 XUART3_TXD I PD VDDQ33_EXT0 GPP1 GPP1[7] UART3_TXD 46 XGPIO12 I PD VDDQ33_EXT0 GPG1 GPG1[4] GPIO 47 XGPIO9 I PD VDDQ33_EXT0 GPG1 GPG1[1] SPI_3_CSn 48 XGPIO11 I PD VDDQ33_EXT0 GPG1 GPG1[3] SPI_3_MOSI 49 XGPIO8 I PD VDDQ33_EXT0 GPG1 GPG1[0] SPI_3_CLK 50 XGPIO10 I PD VDDQ33_EXT0 GPG1 GPG1[2] SPI_3_MISO 51 XGPIO7 I PD VDDQ33_EXT0 GPG0 GPG0[7] SPI_2_MOSI 52 XGPIO6 I PD VDDQ33_EXT0 GPG0 GPG0[6] SPI_2_MISO
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 12 53 XGPIO5 I PD VDDQ33_EXT0 GPG0 GPG0[5] SPI_2_CSn 54 XGPIO4 I PD VDDQ33_EXT0 GPG0 GPG0[4] SPI_2_CLK 55 XSPI1_MISO I PD VDDQ33_EXT0 GPP4 GPP4[2] SPI1_MISO 56 XSPI1_CLK I PD VDDQ33_EXT0 GPP4 GPP4[0] SPI1_CLK 57 XSPI1_MOSI I PD VDDQ33_EXT0 GPP4 GPP4[3] SPI1_MOSI 58 XSPI1_CSN I PD VDDQ33_EXT0 GPP4 GPP4[1] SPI1_CSN 59 XGPIO1 I PD VDDQ33_EXT0 GPG0 GPG0[1] GPIO 60 XGPIO2 I PD VDDQ33_EXT0 GPG0 GPG0[2] HSI2C_3_SCL 61 XGPIO3 I PD VDDQ33_EXT0 GPG0 GPG0[3] HSI2C_3_SDA 62 XGPIO24 I PD VDDQ33_EXT0 GPG3 GPG3[0] GPIO 63 XGPIO25 I PD VDDQ33_EXT0 GPG3 GPG3[1] GPIO 64 XGPIO26 I PD VDDQ33_EXT0 GPG3 GPG3[2] GPIO 65 XGPIO18 I PD VDDQ33_EXT0 GPG2 GPG2[2] GPIO 66 XGPIO19 I PD VDDQ33_EXT0 GPG2 GPG2[3] GPIO 67 XGPIO20 I PD VDDQ33_EXT0 GPG2 GPG2[4] GPIO 68 XGPIO21 I PD VDDQ33_EXT0 GPG2 GPG2[5] GPIO 69 XGPIO15 I PD VDDQ33_EXT0 GPG1 GPG1[7] GPIO 70 XGPIO16 I PD VDDQ33_EXT0 GPG2 GPG2[0] GPIO 71 XGPIO17 I PD VDDQ33_EXT0 GPG2 GPG2[1] GPIO 72 XGPIO13 I PD VDDQ33_EXT0 GPG1 GPG1[5] GPIO 73 XGPIO14 I PD VDDQ33_EXT0 GPG1 GPG1[6] GPIO 74 GND 75 GND 76 GND 77 GND 78 GND 79 GND 80 GND 81 GND 82 GND Note: 1. *Default setting after reset 2. Type definition: [S:Signal ball, P:Power ball, G:GND ball] 3. IO pad type definition: [I:Input, O:Output, I/O: Input/Output 4. Internal Pull Up/Down definition: – PU:Pull Up, PD:Pull Down, N:No Pull
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 13 SIP0P5WRS50 FUNCTIONAL INTERFACES ADC INTERFACE Table 2. ADC Interface Pin Number Pin Name I/O PU/PD Power Default Function 2 XADC0AIN_0 - - AVDD18_ADC0 XADC0AIN_1 3 XADC0AIN_1 - - AVDD18_ADC0 XADC0AIN_0 4 XADC0AIN_2 - - AVDD18_ADC0 XADC0AIN_2 5 XADC0AIN_3 - - AVDD18_ADC0 XADC0AIN_3 DEBUG INTERFACE Table 3. Debug Interface Pin Number Pin Name I/O PU/PD Power Default Function 9 XJTAG_TRST_N I PD VDDQ33_EXT1 XJTAG_TRST_N 10 XJTAG_TMS I PU VDDQ33_EXT1 XJTAG_TMS 11 XJTAG_TCK I PD VDDQ33_EXT1 XJTAG_TCK 12 XJTAG_TDO I PD VDDQ33_EXT1 XJTAG_TDO 13 XJTAG_TDI I PU VDDQ33_EXT1 XJTAG_TDI 23 XDEBUG_RXD I PD VDDQ33_EXT1 XDEBUG_RXD 24 XDEBUG_TXD I PD VDDQ33_EXT1 XDEBUG_TXD GPIO INTERFACE Table 4. GPIO Interface Pin Number Pin Name I/O PU/PD Power Default Function 6 XGPIO22 I PD VDDQ1833_SDIO_0 XGPIO22 7 XGPIO23 I PD VDDQ1833_SDIO_0 XGPIO23 34 XGPIO27 I PD VDDQ33_EXT0 XGPIO27 46 XGPIO12 I PD VDDQ33_EXT0 XGPIO12 47 XGPIO9 I PD VDDQ33_EXT0 XGPIO9 48 XGPIO11 I PD VDDQ33_EXT0 XGPIO11 49 XGPIO8 I PD VDDQ33_EXT0 XGPIO8 50 XGPIO10 I PD VDDQ33_EXT0 XGPIO10 51 XGPIO7 I PD VDDQ33_EXT0 XGPIO7 52 XGPIO6 I PD VDDQ33_EXT0 XGPIO6 53 XGPIO5 I PD VDDQ33_EXT0 XGPIO5 54 XGPIO4 I PD VDDQ33_EXT0 XGPIO4 59 XGPIO1 I PD VDDQ33_EXT0 XGPIO1 60 XGPIO2 I PD VDDQ33_EXT0 XGPIO2 61 XGPIO3 I PD VDDQ33_EXT0 XGPIO3 62 XGPIO24 I PD VDDQ33_EXT0 XGPIO24 63 XGPIO25 I PD VDDQ33_EXT0 XGPIO25
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 14 Pin Number Pin Name I/O PU/PD Power Default Function 64 XGPIO26 I PD VDDQ33_EXT0 XGPIO26 65 XGPIO18 I PD VDDQ33_EXT0 XGPIO18 66 XGPIO19 I PD VDDQ33_EXT0 XGPIO19 67 XGPIO20 I PD VDDQ33_EXT0 XGPIO20 68 XGPIO21 I PD VDDQ33_EXT0 XGPIO21 69 XGPIO15 I PD VDDQ33_EXT0 XGPIO15 70 XGPIO16 I PD VDDQ33_EXT0 XGPIO16 71 XGPIO17 I PD VDDQ33_EXT0 XGPIO17 72 XGPIO13 I PD VDDQ33_EXT0 XGPIO13 73 XGPIO14 I PD VDDQ33_EXT0 XGPIO14 I2C INTERFACE Table 5. I2C Interface Pin Number Pin Name I/O PU/PD Power Default Function 17 XI2C0_SCL I PD VDDQ33_EXT1 XI2C0_SCL 18 XI2C0_SDA I PD VDDQ33_EXT1 XI2C0_SDA 19 XI2C1_SCL I PD VDDQ33_EXT1 XI2C1_SCL 20 XI2C1_SDA I PD VDDQ33_EXT1 XI2C1_SDA INT INTERFACE Table 6. Interrupt Interface Pin Number Pin Name I/O PU/PD Power Default Function 14 XEINT0 I PD VDDQ33_EXT1 XEINT_0 15 XEINT2 I PD VDDQ33_EXT1 XEINT_2 16 XEINT1 I PD VDDQ33_EXT1 XEINT_1 POWER INTERFACE Pin Number Pin Name I/O PU/PD Power Default Function 1 GND - - - - 27 VIN_3P3 - - - - 28 VIN_3P3 - - - - 32 GND - - - - 43 GND - - - - 74~82 GND PWM INTERFACE Table 7. PWM Interface Pin Number Pin Name I/O PU/PD Power Default Function 25 XPWMTOUT_5 I PD VDDQ33_EXT0 XPWMTOUT_5 26 XPWMTOUT_4 I PD VDDQ33_EXT0 XPWMTOUT_4 29 XPWMTOUT_3 I PD VDDQ33_EXT0 XPWMTOUT_3 30 XPWMTOUT_2 I PD VDDQ33_EXT0 XPWMTOUT_2 31 XPWMTOUT_1 I PD VDDQ33_EXT0 XPWMTOUT_1 33 XPWMTOUT_0 I PD VDDQ33_EXT0 XPWMTOUT_0
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 15 RESET INTERFACE Table 8. Reset Interface Pin Number Pin Name I/O PU/PD Power Default Function 8 XRESET_N I - VDDQ33_EXT1 XRESET_N SPI INTERFACE Table 9. SPI Interface Pin Number Pin Name I/O PU/PD Power Default Function 35 XSPI0_CLK I PD VDDQ33_EXT0 XSPI0_CLK 36 XSPI0_MOSI I PD VDDQ33_EXT0 XSPI0_MOSI 37 XSPI0_CSN I PD VDDQ33_EXT0 XSPI0_CSN 38 XSPI0_MISO I PD VDDQ33_EXT0 XSPI0_MISO 55 XSPI1_MISO I PD VDDQ33_EXT0 XSPI1_MISO 56 XSPI1_CLK I PD VDDQ33_EXT0 XSPI1_CLK 57 XSPI1_MOSI I PD VDDQ33_EXT0 XSPI1_MOSI 58 XSPI1_CSN I PD VDDQ33_EXT0 XSPI1_CSN UART INTERFACE Table 10. UART Interface Pin Number Pin Name I/O PU/PD Power Default Function 21 XUART0_RXD I PD VDDQ33_EXT1 XUART0_RXD 22 XUART0_TXD I PD VDDQ33_EXT1 XUART0_TXD 39 XUART1_RXD I PD VDDQ33_EXT0 XUART1_RXD 40 XUART1_TXD I PD VDDQ33_EXT0 XUART1_TXD 41 XUART2_RXD I PD VDDQ33_EXT0 XUART2_RXD 42 XUART2_TXD I PD VDDQ33_EXT0 XUART2_TXD 44 XUART3_RXD I PD VDDQ33_EXT0 XUART3_RXD 45 XUART3_TXD I PD VDDQ33_EXT0 XUART3_TXD
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 16 SIP0P5WRS50 MODULE GPIO ALTERNATE FUNCTIONS Table 11 describes the alternate functions that can be accessed using GPIOs that are available on the edge of the SIP0P5WRS50 Module. Table 11. Alternate functions of the SIP0P5WRS50 Module PIN # Pin Name Default Function Alternate Function 1 2 3 4 5 6 7 6 XGPIO22 XGPIO22 GPG2[6] SerialFLASH_MONITOR_sf1_6 WB2AP_ETM_DATA_OUT_13 WLBT_DEBUG_13 WAKE_EXT_INTG2[6] - - 7 XGPIO23 XGPIO23 GPG2[7] SerialFLASH_MONITOR_sf1_7 WB2AP_ETM_DATA_OUT_14 WLBT_DEBUG_14 WAKE_EXT_INTG2[7] - - 9 XJTAG_TRST_N XJTAG_TRST_N ETC0[0] - - - - - - 10 XJTAG_TMS XJTAG_TMS ETC0[1] - - - - - - 11 XJTAG_TCK XJTAG_TCK ETC0[2] - - - - - - 12 XJTAG_TDO XJTAG_TDO ETC0[4] - - - - - - 13 XJTAG_TDI XJTAG_TDI ETC0[3] - - - - - - 14 XEINT_0 XEINT_0 GPA0[0] WAKE_EXT_INTA0[0] - - - - - 15 XEINT_2 XEINT_2 GPA0[2] WAKE_EXT_INTA0[2] - - - - - 16 XEINT_1 XEINT_1 GPA0[1] WAKE_EXT_INTA0[1] - - - - - 17 XI2C0_SCL XI2C0_SCL GPA1[0] HSI2C_0_SCL - - - - - 18 XI2C0_SDA XI2C0_SDA GPA1[1] HSI2C_0_SDA - - - - - 19 XI2C1_SCL XI2C1_SCL GPA1[2] HSI2C_1_SCL - - - - - 20 XI2C1_SDA XI2C1_SDA GPA1[3] HSI2C_1_SDA - - - - - 23 XDEBUG_RXD XDEBUG_RXD GPA3[0] Xdebug_RXD - - - - - 24 XDEBUG_TXD XDEBUG_TXD GPA3[1] Xdebug_TXD - - - - - 25 XPWMTOUT_5 XPWMTOUT_5 GPP2[5] PWM_TOUT_5 - - - - - 26 XPWMTOUT_4 XPWMTOUT_4 GPP2[4] PWM_TOUT_4 - - - - - 29 XPWMTOUT_3 XPWMTOUT_3 GPP2[3] PWM_TOUT_3 - - - - - 30 XPWMTOUT_2 XPWMTOUT_2 GPP2[2] PWM_TOUT_2 - - - - - 31 XPWMTOUT_1 XPWMTOUT_1 GPP2[1] PWM_TOUT_1 COUNTER_0 UART_3_RTSn - - - 33 XPWMTOUT_0 XPWMTOUT_0 GPP2[0] PWM_TOUT_0 UART_3_CTSn - - - - 34 XGPIO27 XGPIO27 GPG3[3] I2S_0_SDI MCT1_TICK - - - - 35 XSPI0_CLK XSPI0_CLK GPP0[0] SPI_0_CLK - - - - - 36 XSPI0_MOSI XSPI0_MOSI GPP0[3] SPI_0_MOSI - - - - - 37 XSPI0_CSN XSPI0_CSN GPP0[1] SPI_0_CSn - - - - - 38 XSPI0_MISO XSPI0_MISO GPP0[2] SPI_0_MISO - - - - - 39 XUART1_RXD XUART1_RXD GPP0[4] UART_1_RXD UART_2_CTSn - - - - 40 XUART1_TXD XUART1_TXD GPP0[5] UART_1_TXD UART_2_RTSn - - - - 41 XUART2_RXD XUART2_RXD GPP0[6] UART_2_RXD - - - - - 42 XUART2_TXD XUART2_TXD GPP0[7] UART_2_TXD - - - - - 44 XUART3_RXD XUART3_RXD GPP1[6] UART_3_RXD - - - - - 45 XUART3_TXD XUART3_TXD GPP1[7] UART_3_TXD - - - - - 46 XGPIO12 XGPIO12 GPG1[4] SerialFLASH_MONITOR_sf0_4 ALV_DBG[12] WB2AP_ETM_DATA_OUT_03 WLBT_DEBUG_03 WAKE_EXT_INTG1[4] -
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 17 PIN # Pin Name Default Function Alternate Function 1 2 3 4 5 6 7 47 XGPIO9 XGPIO9 GPG1[1] SPI_3_CSn SerialFLASH_MONITOR_sf0_1 ALV_DBG[9] WB2AP_ETM_DATA_OUT_00 WLBT_DEBUG_00 WAKE_EXT_INTG1[1] 48 XGPIO11 XGPIO11 GPG1[3] SPI_3_MOSI SerialFLASH_MONITOR_sf0_3 ALV_DBG[11] WB2AP_ETM_DATA_OUT_02 WLBT_DEBUG_02 WAKE_EXT_INTG1[3] 49 XGPIO8 XGPIO8 GPG1[0] SPI_3_CLK SerialFLASH_MONITOR_sf0_0 ALV_DBG[8] WB2AP_TRACE_CLK_OUT WAKE_EXT_INTG1[0] - 50 XGPIO10 XGPIO10 GPG1[2] SPI_3_MISO SerialFLASH_MONITOR_sf0_2 ALV_DBG[10] WB2AP_ETM_DATA_OUT_01 WLBT_DEBUG_01 WAKE_EXT_INTG1[2] 51 XGPIO7 XGPIO7 GPG0[7] SPI_2_MOSI ALV_DBG[7] - - - - 52 XGPIO6 XGPIO6 GPG0[6] SPI_2_MISO ALV_DBG[6] - - - - 53 XGPIO5 XGPIO5 GPG0[5] SPI_2_CSn ALV_DBG[5] - - - - 54 XGPIO4 XGPIO4 GPG0[4] SPI_2_CLK ALV_DBG[4] - - - - 55 XSPI1_MISO XSPI1_MISO GPP4[2] SPI_1_MISO - - - - - 56 XSPI1_CLK XSPI1_CLK GPP4[0] SPI_1_CLK - - - - - 57 XSPI1_MOSI XSPI1_MOSI GPP4[3] SPI_1_MOSI - - - - - 58 XSPI1_CSN XSPI1_CSN GPP4[1] SPI_1_CSn - - - - - 59 XGPIO1 XGPIO1 GPG0[1] HSI2C_2_SDA ALV_DBG[1] - - - - 60 XGPIO2 XGPIO2 GPG0[2] HSI2C_3_SCL ALV_DBG[2] - - - - 61 XGPIO3 XGPIO3 GPG0[3] HSI2C_3_SDA ALV_DBG[3] - - - - 62 XGPIO24 XGPIO24 GPG3[0] I2S_0_BCLK MCT0_INTlev WB2AP_ETM_DATA_OUT_15 WLBT_DEBUG_15 - - 63 XGPIO25 XGPIO25 GPG3[1] I2S_0_LRCK MCT0_TICK - - - - 64 XGPIO26 XGPIO26 GPG3[2] I2S_0_SDO MCT1_INTlev - - - - 65 XGPIO18 XGPIO18 GPG2[2] SerialFLASH_MONITOR_sf1_2 WB2AP_ETM_DATA_OUT_09 WLBT_DEBUG_09 WAKE_EXT_INTG2[2] - - 66 XGPIO19 XGPIO19 GPG2[3] SerialFLASH_MONITOR_sf1_3 WB2AP_ETM_DATA_OUT_10 WLBT_DEBUG_10 WAKE_EXT_INTG2[3] - - 67 XGPIO20 XGPIO20 GPG2[4] SerialFLASH_MONITOR_sf1_4 WLBT_UART_RXD WB2AP_ETM_DATA_OUT_11 WLBT_DEBUG_11 WAKE_EXT_INTG2[4] - 68 XGPIO21 XGPIO21 GPG2[5] SerialFLASH_MONITOR_sf1_5 WLBT_UART_TXD WB2AP_ETM_DATA_OUT_12 WLBT_DEBUG_12 WAKE_EXT_INTG2[5] - 69 XGPIO15 XGPIO15 GPG1[7] SerialFLASH_MONITOR_sf0_7 ALV_DBG[15] WB2AP_ETM_DATA_OUT_06 WLBT_DEBUG_06 WAKE_EXT_INTG1[7] - 70 XGPIO16 XGPIO16 GPG2[0] SerialFLASH_MONITOR_sf1_0 WB2AP_ETM_DATA_OUT_07 WLBT_DEBUG_07 WAKE_EXT_INTG2[0] - - 71 XGPIO17 XGPIO17 GPG2[1] SerialFLASH_MONITOR_sf1_1 WB2AP_ETM_DATA_OUT_08 WLBT_DEBUG_08 WAKE_EXT_INTG2[1] - - 72 XGPIO13 XGPIO13 GPG1[5] SerialFLASH_MONITOR_sf0_5 ALV_DBG[13] WB2AP_ETM_DATA_OUT_04 WLBT_DEBUG_04 WAKE_EXT_INTG1[5] - 73 XGPIO14 XGPIO14 GPG1[6] SerialFLASH_MONITOR_sf0_6 ALV_DBG[14] WB2AP_ETM_DATA_OUT_05 WLBT_DEBUG_05 WAKE_EXT_INTG1[6] -
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 18 SIP0P5WRS50 MODULE BOOTING SEQUENCE The section describes the timing associated with powering up and resetting the SIP0P5WRS50 Module. Figure 4. Booting and Reset Timing Relations
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 19 SIP0P5WRS50 MODULE WI-FI ANTENNA STRUCTURE The SIP0P5WRS50 Module has an chip Antenna and the feature is as below.  ISM 2.4GHz Wireless Device  Frequency range 2.4~2.485GHz  chip type Antenna  Size is 3.0 * 1.5 * 1.2 ㎣  SMT type It is mounted on the PCB. Antenna gain is as below.
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 20 SIP0P5WRS50 MODULE ELECTRICAL SPECIFICATIONS ABSOLUTE MAXIMUM RATING Table 12. Absolute Maximum Ratings PAD:[Pin#] Symbol Condition Min Typ Max Units PAD:[27~28] VIN Input voltage VIN on the module – – 3.6 V Other signal pad Vundershoot Undershoot voltage for I/O -0.3 – - V PAD:[31] PWR_RST – -0.3 – 3.6 V DC ELECTRICAL CHARACTERISTICS Table 13. I/O DC Electrical Characteristics (PAD:5,6,14-26,29-31,33-42,44-73) Parameter Condition Min Typ Max Units Tolerant External Voltage VTOL 3.3 Power Off and On – – 3.60 V High-Level Input Voltage CMOS Interface VIH 2.31 – 3.60 V Low-Level Input Voltage CMOS Interface VIL VDD=3.30V -0.30 – 0.70 V Hysteresis Voltage ΔV 0.15 – – V High-Level Input Current Input Buffer IIH VIN=3.30V VDD=3.30V Power On -3.00 – 3.00 µA VDD=3.30V Power Off & SNS=0 -5.00 – 5.00 µA Input Buffer with Pull-Down VIN=3.30V VDD=3.30V 13 40 90 µA Low-Level Input Current Input Buffer IIL VIN=0V VDD=3.30V Power On and Off -3.00 – 3.00 µA Input Buffer with Pull-Down VIN=0V VDD=3.30V -13.00 – -90.00 µA Output High Voltage VOH IOH = 2.0mA, 4.0mA, 8.0mA and 12.0mA 2.64 – 3.30 V Output Low Voltage VOL IOL = -2.0mA, -4.0mA, -8.0mA and -12.0mA 0 – 0.66 V Output Hi-Z Current VOZ -5 – 5 µA Input Capacitance CIN Any input and bi-directional buffers – – 5 pF Table 14. I/O DC Electrical Characteristics (PAD:[2-5], ADC) Parameter Condition Min Typ Max Units High Level Input Voltage VIH Guaranteed Logic High Level 1.26 – 1.80 V Low Level Input Voltage VIL Guaranteed Logic Low Level 0 – 0.54 V Output High Voltage VOH IOH=2mA, 4mA, 8mA and 12mA 1.44 – 1.80 V Output Low Voltage VOL IOL=2mA, 4mA, 8mA and 12mA 0 – 0.36 V Input Pull-Up Resistor Current IRPU VPAD=0 15 – 77 µA Input Pull-Down Resistor Current IRPD VPAD=1.80 17 – 77 µA Input Hysteresis VH – 0.18 – – V Input Leakage Current for Non Tolerant Cells IPAD DVDD=1.80, VPAD=0 or 1.80V -6 – +6 µA Off State Leakage Current IOZ DVDD=1.80, VPAD=0 or 1.80V -6 – +6 µA
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 21 Table 15. Recommended Operating Conditions Parameter Symbol Min Typ Max Units Main Power Supply: PAD:[27-28] VIN_3P3 3.3 V Maximum Operating Temperature TO -20 – 85 °C Storage Temperature TS TBD – TBD °C Table 16. I/O Drive Strength State Currents: worst conditions VDD=3.30V Units DS0 DS1 SR: 0: Fast, 1: Slow 0 0 0/1 2 mA 0 1 0/1 4 mA 1 0 0/1 8 mA 1 1 0/1 12 mA DC MODULE USE CASE CHARACTERISTICS TBD POWER SUPPLY REQUIREMENTS TBD ESD RATINGS Table 17. ESD Ratings Parameter Min Typ Max Units ESD stress voltage Human Body Model (JEDEC) -1.0 – 1.0 kV ESD stress voltage Charged Device Model – 250 – V RF ELECTRICAL CHARACTERISTICS TBD
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 22 SIP0P5WRS50 MODULE MECHANICAL SPECIFICATIONS In Figure 5 the mechanical dimensions of the SIP0P5WRS50 Module are provided. All dimensions are in mm. [TOP] [BOT] Figure 5. SIP0P5WRS50 Module Mechanical Dimensions
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 23 SIP0P5WRS50 MODULE FCC CERTIFICATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. Instruction to OEM This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This application and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. Host labeling requirement: “Contains transmitter module FCC ID: A3LSIP0P5WRS50 IC : 649E-SIP0P5WRS50 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 24 SIP0P5WRS50 MODULE ORDERING INFORMATION Type Order Number Description SIP0P5WRS50 Module ?? One SIP0P5WRS50 Module SIP0P5WRS50 Evaluation Kit ?? One SIP0P5WRS50 Module One EVK Board One Wi-Fi Antenna For volume ordering of evaluation kits, please contact a sales representative in your area or email sales@artik.io.
Samsung Semiconductor, Inc. SIP0P5WRS50 Module Datasheet Samsung Confidential Specifications in this document are tentative and subject to change. 25 LEGAL INFORMATION INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH THE SAMSUNG ARTIK™ DEVELOPMENT KIT AND ALL RELATED PRODUCTS, UPDATES, AND DOCUMENTATION (HEREINAFTER “SAMSUNG PRODUCTS”). NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. THE LICENSE AND OTHER TERMS AND CONDITIONS RELATED TO YOUR USE OF THE SAMSUNG PRODUCTS ARE GOVERNED EXCLUSIVELY BY THE SAMSUNG ARTIK™ DEVELOPER LICENSE AGREEMENT THAT YOU AGREED TO WHEN YOU REGISTERED AS A DEVELOPER TO RECEIVE THE SAMSUNG PRODUCTS. EXCEPT AS PROVIDED IN THE SAMSUNG ARTIK™ DEVELOPER LICENSE AGREEMENT, SAMSUNG ELECTRONICS CO., LTD. AND ITS AFFILIATES (COLLECTIVELY, “SAMSUNG”) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION CONSEQUENTIAL OR INCIDENTAL DAMAGES, AND SAMSUNG DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, ARISING OUT OF OR RELATED TO YOUR SALE, APPLICATION AND/OR USE OF SAMSUNG PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATED TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT. SAMSUNG RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION, DOCUMENTATION AND SPECIFICATIONS WITHOUT NOTICE. THIS INCLUDES MAKING CHANGES TO THIS DOCUMENTATION AT ANY TIME WITHOUT PRIOR NOTICE. THIS DOCUMENTATION IS PROVIDED FOR REFERENCE PURPOSES ONLY, AND ALL INFORMATION DISCUSSED HEREIN IS PROVIDED ON AN “AS IS” BASIS, WITHOUT WARRANTIES OF ANY KIND. SAMSUNG ASSUMES NO RESPONSIBILITY FOR POSSIBLE ERRORS OR OMISSIONS, OR FOR ANY CONSEQUENCES FROM THE USE OF THE DOCUMENTATION CONTAINED HEREIN. Samsung Products are not intended for use in medical, life support, critical care, safety equipment, or similar applications where product failure could result in loss of life or personal or physical harm, or any military or defense application, or any governmental procurement to which special terms or provisions may apply. This document and all information discussed herein remain the sole and exclusive property of Samsung. All brand names, trademarks and registered trademarks belong to their respective owners. For updates or additional information about Samsung ARTIK™, contact the Samsung ARTIK™ team via the Samsung ARTIK™ website at www.artik.io. Copyright © 2016 Samsung Electronics Co., Ltd. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electric or mechanical, by photocopying, recording, or otherwise, without the prior written consent of Samsung Electronics.

Navigation menu