Samsung Electronics Co STHA225 Dual-Mode Cellular Phone (AMPS/TDMA) User Manual Users Manual

Samsung Electronics Co Ltd Dual-Mode Cellular Phone (AMPS/TDMA) Users Manual

Users Manual

Download: Samsung Electronics Co STHA225 Dual-Mode Cellular Phone (AMPS/TDMA) User Manual Users Manual
Mirror Download [FCC.gov]Samsung Electronics Co STHA225 Dual-Mode Cellular Phone (AMPS/TDMA) User Manual Users Manual
Document ID161554
Application IDDr2P0mRjTuTEKdMqpt5EVA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize44.06kB (550803 bits)
Date Submitted2001-07-25 00:00:00
Date Available2001-11-15 00:00:00
Creation Date2001-04-03 12:55:21
Producing SoftwareAcrobat Distiller 4.0 for Macintosh
Document Lastmod2001-07-24 13:39:28
Document TitleUsers Manual

* Some contents in this manual may differ from your phone depending on
the software of the phone or your service provider.
TDMA MOBILE
TELEPHONE
STH-A225
.2
ELECTRONICS
Please, be sure to read this
manual before using your phone.
And keep the manual after
reading it and use any time you
have a question.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No. : GH68-xxxxxA
English. 6/2001. Rev. 1.0
4 GHI
2 ABC 3 DEF
5 JKL
6 MNO
8 TUV 9 WXYZ
7 PQRS
FCC RF EXPOSURE INFORMATION
SAR Information & FCC ID Labeling
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC
guidelines and these international standards.
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS
FOR EXPOSURE TO RADIO WAVES.
Use only the supplied or an approved antenna. Unauthorized
antennas, modifications, or attachments could impair call quality,
damage the phone, or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may
result. Please contact your local dealer for replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations using
the optional belt-clip/holster placed 1.0 inch (2.5cm) from the
body. To comply with FCC RF exposure requirements, a minimum
separation distance of 1.0 inch (2.5cm) must be maintained
between the user’s body and the phone, including the antenna,
whether extended or retracted. The use of third-party belt-clips/
holsters with no metallic components that provide the minimum
separation distance of 1.0 inch (2.5cm) can be used to satisfy
FCC RF exposure requirements. The use of non-tested
accessories or other body-worn operations may not comply with
FCC RF exposure requirements and should be avoided. Contact
your local dealer for optional accessory items.
Vehicle Mounted External Antenna (optional, if available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained Between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
For more information about RF exposure, please visit the FCC
website at www.fcc.gov
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radiofrequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement know as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted
using standard operating positions specified by the FCC with the
phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use
only the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested for
use at the ear is XXXXX and when worn on the body, as described in
this user guide, is XXXXX . (Body-worn measurements differ among
phone models, depending upon available accessories and FCC
requirements). While there may be differences between the SAR
levels of various phones and at various positions, they all meet the
government requirement for safe exposure.
ii
Contents
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID XXX XXXX.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com (see note).
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
Note: The URL http://phonefacts.net may be used in place
of http://www.wow-com for direct access to SAR
information.
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Your Phone
Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Getting Started
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . . . 18
Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
General Functions
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Viewing Missed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Quick-switching to Silent Mode . . . . . . . . . . . . . . . . . . . . 25
Selecting Functions and Options
Using the Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selecting Functions and Options . . . . . . . . . . . . . . . . . . . 27
Example: Setting the Display Language . . . . . . . . . . . . 28
Phonebook
Storing a Phone Number with a Name . . . . . . . . . . . . . 30
Speed Dialing by Memory Location . . . . . . . . . . . . . . . 32
Phonebook Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Searching for and Dialing
a Number in the Phonebook . . . . . . . . . . . . . . . . . 35
Name Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
iii
In-Call Options
Phone Settings
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Switching the Microphone Off (Mute) . . . . . . . . . . . . . . 40
Muting/Sending Key Tones . . . . . . . . . . . . . . . . . . . . . . 40
Searching for a Number in the Phonebook . . . . . . . . . . 41
Making a Calling Card Call . . . . . . . . . . . . . . . . . . . . . . 41
Using the SMS Service . . . . . . . . . . . . . . . . . . . . . . . . 42
Answering a Second Call . . . . . . . . . . . . . . . . . . . . . . . 42
Making a Conference Call . . . . . . . . . . . . . . . . . . . . . . 43
Greeting Message (Menu 4.1). . . . . . . . . . . . . . . . . . . . 64
LCD Control (Menu 4.2) . . . . . . . . . . . . . . . . . . . . . . . . . 64
Service Light (Menu 4.3) . . . . . . . . . . . . . . . . . . . . . . . . 65
Auto Redial (Menu 4.4) . . . . . . . . . . . . . . . . . . . . . . . . . 66
Answer Mode (Menu 4.5) . . . . . . . . . . . . . . . . . . . . . . . 66
Slide Menu (Menu 4.6) . . . . . . . . . . . . . . . . . . . . . . . . . 67
Language (Menu 4.7) . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Reset Settings (Menu 4.8) . . . . . . . . . . . . . . . . . . . . . . . 67
Calling Card (Menu 4.10). . . . . . . . . . . . . . . . . . . . . . . . 68
ShortCut (Menu 4.9) . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Using the Menus
Accessing a Menu Function by scrolling . . . . . . . . . . . 44
Accessing a Menu Function by Using its Shortcut . . . . 45
List of Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . 46
Call Records
Missed Calls (Menu 1.1) . . . . . . . . . . . . . . . . . . . . . . . . 50
Incoming Calls (Menu 1.2) . . . . . . . . . . . . . . . . . . . . . . 50
Outgoing Calls (Menu 1.3) . . . . . . . . . . . . . . . . . . . . . . . 51
Call Time (Menu 1.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Messages
Voice Mail (Menu 2.1). . . . . . . . . . . . . . . . . . . . . . . . . . 52
Read Messages (Menu 2.2) . . . . . . . . . . . . . . . . . . . . . 53
Write Messages (Menu 2.3) . . . . . . . . . . . . . . . . . . . . . 55
Preset Message List (Menu 2.4) . . . . . . . . . . . . . . . . . . 56
Setup (Menu 2.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Sound Settings
Ring Volume (Menu 3.1) . . . . . . . . . . . . . . . . . . . . . . . . 58
Ring Tone (Menu 3.2) . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Alert Type (Menu 3.3) . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Tone Length (Menu 3.4) . . . . . . . . . . . . . . . . . . . . . . . . 59
Message Tone (Menu 3.5) . . . . . . . . . . . . . . . . . . . . . . 60
Error Tone (Menu 3.6) . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Minute Minder (Menu 3.7) . . . . . . . . . . . . . . . . . . . . . . 61
Connect Tone (Menu 3.8) . . . . . . . . . . . . . . . . . . . . . . . 61
Melody Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Organizer
Calendar (Menu 5.1) . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
To Do List (Menu 5.2) . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Time & Date (Menu 5.3) . . . . . . . . . . . . . . . . . . . . . . . . 75
Alarm (Menu 5.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Calculator (Menu 5.5) . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Security
Change Lock code (Menu 6.1) . . . . . . . . . . . . . . . . . . . 79
Change Security code (Menu 6.2) . . . . . . . . . . . . . . . . . 79
Call Restriction (Menu 6.3) . . . . . . . . . . . . . . . . . . . . . . 80
SOS Call List (Menu 6.4) . . . . . . . . . . . . . . . . . . . . . . . . 81
Network Services
Call Diverting (Menu 7.1) . . . . . . . . . . . . . . . . . . . . . . . 82
Call Waiting (Menu 7.2) . . . . . . . . . . . . . . . . . . . . . . . . 83
Network Selection (Menu 7.3) . . . . . . . . . . . . . . . . . . . 83
Voice Privacy (Menu 7.4) . . . . . . . . . . . . . . . . . . . . . . . 84
NAM Selection(Menu 7.5) . . . . . . . . . . . . . . . . . . . . . . 84
Set Service Code(Menu 7.6) . . . . . . . . . . . . . . . . . . . . . 86
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Voice Memo Pad
Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Replay & Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Edit Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Important Safety Precautions
Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Using the Batteries
Precautions When Using Batteries . . . . . . . . . . . . . . . . 94
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see Safety
Information on page 96.
Safety Information
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . 96
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 98
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Quick Reference Card . . . . . . . . . . . . . . . . . . . . . . 107
FDA Consumer Update . . . . . . . . . . . . . . . . . . . . . . 109
Switch off in aircraft
Mobile phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Respect special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause interference
or danger (in a hospital for example).
Interference
All mobile phones may be subject to radio
interference, which may affect their performance.
Qualified service
Only qualified service personnel should repair
cellular equipment. Use only approved accessories
and batteries.
Important Safety Precautions
Unpacking
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when the
phone is switched on.
Emergency calls
Ensure the phone is switched on and in service.
Enter the emergency number (100 or other official
emergency number) and press the
key. Give your
location. Do not end the call until given permission to
do so. End the call by closing the phone or pressing
the
key.
IMPORTANT! Use only SAMSUNG-approved
accessories.
The use of any other power-supplying accessory will
invalidate any approval or warranty applying to the
phone, and may be dangerous.
Your package contains the following items.
Handset
Travel Charger
Battery
Hand Strap
User’s Manual
When you disconnect the power cord of any accessory,
grasp and pull the connector, not the cord.
In addition, you can obtain the following accessories for
your phone from your local SAMSUNG dealer:
• Desktop charger
• Hands-free kit
• Standard/Extended battery
• Cigarette lighter adapter
• Earphone
• Leather case
Your Phone
Your Phone
Key
Phone Layout
The following illustrations show the main elements
of your phone.
(soft keys)
When pressed in idle mode, access your
favorite menu options directly (for more
information on shortcuts, see page 68).
Display
In the menu facility, return to the previous
menu level and select the current menu,
respectively.
Service light
Soft key (right)
Volume/menu
browse keys
Navigation keys
Power on/off key
Cancel/
correction key
Dial/menu
confirmation key
2 ABC
4 GHI
Earphone jack
7 PQRS
5 JKL
8 TUV
Microphone
3DEF
6MNO
9WXYZ
When entering a name, move the cursor
left and right, respectively.
When pressed in idle mode, the
key
enters your favorite menu options directly
(for more information on shortcuts, see
page 70). The key records a voice
memo when held down in idle mode and
the phone conversation during a call.
Alphanumeric
keys
Special function
keys
Top
Antenna
Perform the functions indicated by the text
above them (in the bottom line of the
display).
In the menu facility, scroll through the
menu options and phonebook memory.
Earpiece
Soft key (left)
Description
Deletes characters from the display.
In the menu facility, returns to the
previous menu level.
When held down for more than two
seconds in idle mode, quickly enters or
exits the silent mode.
Your Phone
Key
Your Phone
Description
Display
Makes or answers a call.
In idle mode, recalls the last number
dialed.
Display Layout
The display comprises three areas.
Ends a call. Also switches the phone on
and off when pressed and held.
In the menu facility, returns to the idle
mode and cancels your input.
9 WXYZ
Text and
graphic area
When held down for more than two
seconds in idle mode, accesses your voice
mailbox.
Enter numbers, letters and some special
characters.
Enter special dial characters. Also use
these keys for various purposes in
different functions.
(on the side of the phone)
During a call, adjusts the earpiece volume.
In idle mode with the phone open, adjusts
the key volume.
In the menu facility, scrolls through the
menu options and phonebook memory.
10
Icons
Menu
Names
Soft key indications
Area
Description
First line
Displays various icons (see page 12).
Middle lines
Display messages, instructions and
any information that you enter
(number to be dialed, for example).
Last line
Shows the functions currently
assigned to the two soft keys.
11
Your Phone
Backlight
Icons
Icon
Your Phone
Description
Shows the received signal strength. The
greater the number of bars, the better the
signal strength.
Appears when a call is in progress.
Appears when you are out of service area.
Appears when you are out of your home
area and have registered with a different
network (when travelling in other cities and
countries, for example).
Appears when a new text message has
been received.
Appears when the phone is in digital mode.
Appears when the silent mode is activated
and when the Alert Type menu option (3.3)
is set to Vibration.
The display is illuminated by a backlight. When you
press any key, the backlight illuminates. It turns off if
no key is pressed within a given period of time,
depending on the Backlight option set in the
Phone Settings menu.
To specify the length of time for which the backlight
is active, set the Backlight menu option (4.2.1); see
page 64 for further details.
Service Light
The service light is in the top right-hand corner of the
phone. It flashes to indicate phone status: When the
the phone is ready for use, it flashes in green. When
a call or message comes in, and you are recording a
voice memo, it flashes in red.
To activate or deactivate use of the service light, set
the Service Light menu option (4.3); see page 64 for
further details.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when a new voice mail message
has been received.
Service light
Appears when you set the mute mode.
Appears when you set an alarm.
12
13
Getting Started
Getting Started
Installing the Battery
To Remove the Battery
To Install the Battery
1. If necessary, switch off the phone by holding
down the
key until the the power off
graphic begins to play.
1. Insert the tabs on the base of the battery into the
notches on the base of the phone, as shown.
2. Remove the battery. To do so:
➀ Push up and hold the catch above the battery
on the back of the phone
➁ Lift the battery away
➁
➀
30¡
➁
2. Push the battery down until it snaps into place,
Use the grooves on
both sides of the phone
when you lift the
battery away.
14
13
15
Getting Started
Getting Started
Charging a Battery
2. Connect the charger to a standard AC wall outlet.
Your phone is powered by a rechargeable Li-Ion
battery. A travel charger is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
The phone can be used while the battery is charging.
3. When charging is finished (the lamp on the
charger turns green), disconnect the charger from
the power outlet and remove it from the phone by
squeezing the two tabs on the lead (➀) and unplug
the lead(➁).
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
➀
Charging a Battery by a Travel Charger
➁
➀
1. With the battery in position on the phone, connect
the lead from the travel charger to the jack on the
bottom of the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and
the following message will be repeated at regular
intervals on the display:
**Warning**
Low Battery
When the battery becomes too weak for the phone
to operate, it switches off automatically.
16
17
Getting Started
Getting Started
Switching the Phone On/Off
Locking Your Phone
1. Open the phone.
You can lock your phone to protect the phone against
unauthorized use. When the phone is locked, you
cannot operate the phone until you enter the lock
code.
2. Hold down the
key for more than one
second to switch the phone on.
3. The phone searches for your network and when
it finds it, the idle screen, illustrated below, is
displayed.
< SERVICE PROVIDER>
12:57
Sat 14 Mar
Menu
Names
To lock your phone:
Press and hold down the key for more than two
seconds in idle mode. “Phone Locked” appears on
the idle screen.
< SERVICE PROVIDER>
12:57
Phone Locked
Unlock
Note: The display language is factory set to English.
To change the language, use the Language
menu option (4.7); for further details, refer to
page 67.
4. When you wish to switch the phone off, hold down
the
key for more than two seconds.
SOS
To unlock the phone:
Press the Unlock soft key and enter the lock code,
then press the OK soft key. Your phone’s lock code is
preset at the factory to 00000000. For further details,
see page 79.
Even when the phone is locked, you can place an
SOS call to one of the emergency numbers stored in
the SOS Call List (6.4). See page 81 for further
details.
To place an SOS call, press the SOS soft key, select
the desired emergency number using the
and
key and press the Yes soft key.
18
19
General Functions
General Functions
Ending a Call
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press the
key.
Note: If you have set the Auto Redial menu option (4.6)
to ON (see page 66) and the person called does
not answer or is already on the phone, the
number is redialed automatically up to ten times.
If the network answers the call (by voice mail
greeting, for example), the phone does not redial.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the C key.
Any other digit
in the number
Press the
or
key until
the cursor is immediately to the
right of the digit to be cleared.
Press the C key. You can also
insert a missing digit simply by
pressing the appropriate key.
The whole display
20
Hold down the C key for more
than one second.
When you have finished your call, briefly press and
release the
key.
Making a Call from the Phonebook
You can store the names and phone numbers called
regularly in the phone memory, called the phonebook.
You then simply select the required name to recall
the associated number. For further details on the
Phonebook feature, refer to page 30.
Redialing the Last Number
The phone stores the last 10 numbers dialed. To
recall any of these numbers, proceed as follows.
1. If you have typed any characters on the display,
clear the display by holding down the C key for
more than one second.
2. Press the
key to display the last number dialed.
3. Use the
and
keys to scroll through the
numbers until the required number is displayed.
4. To...
Then...
Dial the number
displayed
Press the
key.
Edit the number
displayed
• Press the Edit soft key.
• Change the number as
required, referring to
Correcting the Number for
further details (see previous
page).
21
General Functions
General Functions
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the and keys on the left side of
the phone. Press to increase and to decrease
the volume.
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed. If the caller cannot be identified, only the
phone animation plays.
1. If necessary, open the phone. Press the
key or
the Accept soft key to answer the incoming call.
Note: If the Answer Mode menu option (4.5) is set
to Open Answer, you do not need to press
any key. You can answer the call simply by
opening the phone (see page 66).
2. End the call by closing the phone or pressing the
key.
3DEF
2 ABC
GHI
7 PQRS
JKL
TUV
6MNO
9WXYZ
Note: You can answer a call while using the
phonebook or menu features. The current
operation will be interrupted.
In idle mode with the phone open, you can adjust the
key volume using the and keys .
Viewing Missed Calls
Answering a Call
When somebody calls you, the phone rings and the
phone animation plays in the middle of the screen.
nnnnn
((
Accept
))
Caller’s name or
number (if available)
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that this
service is available. In this way, you can call the
person back, if necessary.
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
To view the missed call immediately, proceed as
follows.
1. If the phone is closed, open it.
22
23
General Functions
General Functions
2. Press the View soft key.
Deleting a Missed Call
The number corresponding to the most recent
missed call is displayed, if available.
3. To...
Then press the...
Scroll through the
missed calls
and
Call the number displayed
key.
Edit or delete a missed
call number
keys.
Options soft key
(see next page).
Editing a Missed Call Number
1. Press the Options soft key.
4. Change the number as required.
Call the number
Store the number
24
or
key to highlight
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
Note: You can access the Missed Call feature at
any time by selecting the Missed Calls menu
option (1.1); for further details, see page 50 .
You can quickly switch your phone to silent mode
with a touch of a key. Press and hold the C key until
the
icon and Silent Mode appears in display.
Your phone goes to silent mode immediately.
key to highlight
3. Press the Select soft key.
5. To...
2. If necessary, press the
the Delete option.
Quick-switching to Silent Mode
Note: If the caller’s number associated with the
missed call is not available, the Edit option is
not displayed.
2. If necessary, press the
or
the Edit Number option.
1. Press the Options soft key.
Then press the...
key.
Save soft key and enter
the name and location
required (for further
details, refer to page 30).
In silent mode, your phone switches the sound
settings as follows:
alert type (3.3)
message tone (3.5)
error tone (3.6)
keypad tone
vibration + light
vibration + light
off
off
Press and hold the C key again to exit silent mode.
This feature is convenient when you are in a hurry to
mute the phone sound, such as when in a theater.
25
Selecting Functions and Options
Selecting Functions
and Options
Selecting Functions and Options
Using the Soft Keys
To view the various functions/options available and
select the one required, proceed as follows.
Your phone offers a set of functions that allow
you to customize your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys marked
. Each menu and sub-menu
allows you to view and alter the settings of a
particular function.
1. Press the appropriate soft key.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Example:
Enter Name
OK
2. To...
Then press the...
Select the:
• Function displayed
or
• Option highlighted
Select soft key or
key.
View the next function
or highlight the next
option in a list
key or key on
the left side of the
phone.
Move back to the
previous function or
option in a list
key or key on
the left side of the
phone.
Move back up one
level in the structure
key, soft key
or C key.
Exit the structure
without changing
the settings
key.
In some functions, you may be asked for a lock code
or security code. Enter the required code and press
the OK soft key.
Press the left soft
key to save the
name entered.
26
Press the right soft key to
select the text input mode
(upper case, lower case
and numeric characters).
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active, so that you
can select it directly.
27
Selecting Functions and Options
Selecting Functions and Options
Example: Setting the Display Language
1. When the idle screen is displayed, press the
Menu soft key to enter the menu facility.
4. Scroll through the sub-menus until you reach the
Language sub-menu, by pressing the
and
keys.

10:30
Fri 15 May
Menu
Language
Names
2. Scroll through the menus until you reach the
Phone Settings menu, by pressing the
and
keys.
Current
language
English
Select
4.7
5. To view the languages available, press the
Select soft key or the
key. The current setting
is highlighted.
Phone Settings
Current
language
Select
English
Français
Español
Select
3. To select the Phone Settings menu, press the
Select soft key or key.
28
4 . 7. 1
6. Scroll through the list of languages until the
appropriate one is highlighted, by pressing the
and
keys.
Greeting Message
7. Press the Select soft key or the
confirm your selection.
Select
8. Press the C or
structure.
4.1
key to
key twice to exit the menu
29
Phonebook
Phonebook
6. Enter your preferred location by pressing the
number keys.
The Phonebook allows you to store frequently used
phone numbers and the associated names in your
phone to make it easy for you to make a call without
having to remember or enter the phone number. You
can store up to 250 (1 ~ 250) numbers.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the
number in the phonebook.
7. Press OK to store the name and number.
8. Press
If you want to make a call to the number, press
the Call soft key. And if you want to access the
Phonebook options, press the Options soft key.
Entering a Name
1. To select...
1. Key in the number to be stored.
Note: If you make a mistake while entering a
number, correct it using the C key. For
further details, refer to page 20.
2. When you are sure that it is correct, press the
Save soft key.
3. Select a label by pressing the
press the Save soft key.
or
key, and
The available labels are: Home, Office, Mobile,
Pager, Fax, E-mail and No label.
4. Enter the corresponding name. For information on
how to enter a name, see next page.
5. When you are satisfied, press the OK soft key.
The phone now prompts you to select a location in
the phone memory for you to save the number and
name.
Then press the
soft key until...
Upper case characters
is displayed.
Lower case characters
is displayed.
Numbers only
is displayed.
2. Press the key labeled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
Characters in the Order Displayed
Key
30
to return to the idle screen.
Lower Case
Upper Case
Space
A B
D E
G H
J K
MN
P Q
S 7
T U
WX
*/ + - = < > ( )
%&
ΦΘΨΠΣ Ξ
Space
†
“
s 7
z 9
. , : ; ! ? @‘
¿ § £ $ ¥ ¤ ß Ω
31
Phonebook
Phonebook
Phonebook Options
3. Select the other letters in the same way.
Note: The cursor moves to the next available
space when you press a different key.
When entering the same letter twice (or a
different letter on the same key), just wait
for a few seconds for the cursor to move
automatically, and then select the next
letter.
You can also move the cursor by using the
and
1. Press the Options soft key. The first available
option is highlighted.
Speed Dialing by Memory Location
Once you have stored phone numbers in the phone
book memory, you can dial them easily whenever you
want.
To speed dial the desired number:
For the 1-digit memory location number (1 through 9),
press and hold down the appropriate digit.
For the 2 or more-digit memory location number (10
through 250), press first digit(s) briefly and hold
down the last digit.
Note: If you enter the location number and then
press the key, your phone displays the
details on the entry, such as name, number,
location number and label. If you have stored
more than one number for a name, scroll
32
Accessing the Options
To access the various phonebook options, proceed as
follows.
keys.
through the entry by pressing
When storing or viewing a number in the phonebook,
Options appears above the right soft key to allow
you to access the phonebook options, described in
the following paragraphs.
and
2. To...
Then press the...
Select the
highlighted option
Select soft key or
key.
Highlight a
different option
or
key one or more
times until the required
option is highlighted.
Add Number
This option allows you to place up to 4 numbers in
one Phonebook location by labeling each of the
numbers.
Note that you can only use each label one time for
each stored name. For example, you can only have
one number labeled Work for a name entry.
keys.
33
Phonebook
Phonebook
Change Name
Move
This option allows you to change the name for the
number. Clear the old name by pressing the C key and
enter a new name. For information on entering a
name, see page 31.
This option allows you to move a phonebook entry to
another location. When prompted, enter the location
number which you are moving the number to, and
press the OK soft key.
Change Number
Set Priority No.
This option allows you to change the number. Clear the
old number by pressing the C key and enter a new
number.
This option allows you to set the selected number as
a speed dial number for the entry if it has more than
one number. Press the Set soft key.
Change Type
This option allows you to change the label type of a
stored number. Note that you can only use each label
one time for each stored name. For example, you can
only have one number labeled Work for a name entry.
Searching for and Dialing a Number in
the Phonebook
Caller Group
1. When the idle screen is displayed, press the
Names soft key. You are asked to enter a name.
This option allows you to include the number as a
member of the desired caller group. For more details
on Caller Group, see page 37.
2. Enter the starting characters of the name that you
want to find and press the Search soft key.
Erase Number
This option allows you to erase a stored number. If you
saved two numbers under a name, only the currently
selected number will be erased. You are asked to
confirm that you wish to erase the number by pressing
the Yes soft key.
Note: You can also scroll through all phonebook
entries by pressing the Search soft key
directly.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
Erase Name
This option allows you to erase a name stored in the
phonebook so that all numbers under the name are
erased. You are asked to confirm that you wish to
erase the name by pressing the Yes soft key.
34
35
Phonebook
3. To...
Phonebook
Then press the...
New Entry
View the
highlighted entry
View soft key.
Select a
different entry
or
key one or more
times until the required
entry is highlighted.
Look for a name
starting with a
different letter
Key labeled with the
required letter.
4. Once you have found the required entry, press the
key to dial the number.
While entering a name for searching, you can see
the Option soft key with the Search soft key. This
key allows you to enter the various options.
Accessing the Options
To access the various phonebook options, proceed as
follows.
1. While entering a name, press the Options soft
key. The first available option is highlighted.
36
Caller Group
You can set the phone to ring in a specific way and
display a preselected graphic icon when a particular
person calls you. To do so, you must:
• Define your caller groups
• Assign the numbers in the phonebook to the
appropriate group
Defining a caller group
Name Options
2. To...
This option allows you to create a new entry in the
Phonebook. For details on storing a phone number,
see page 30.
Then press the...
Select the
highlighted option
Select soft key or
key.
Highlight a
different option
or
key one or more
times until the required
option is highlighted.
Select the group to be defined and set the
appropriate options. The following options are
available.
Call ring tone: allows you to select the ring tone to
be used when you receive a voice phone call from a
person in the group.
SMS tone: allows you to select the ring tone to be
used when you receive a text message from a person
in the group.
Graphic: allows you to select the graphic icon to be
displayed when you receive a call from a person in
the group.
Group Name: allows you to assign a name to the
group; for further details on how to enter characters,
refer to page 31.
37
Phonebook
In-Call Options
Assigning numbers to a group
1. View the required number in the phonebook.
2. Press the Options soft key.
Your phone provides a number of control functions
that you can use during a call.
3. Select the Caller Group option.
4. Select the required group.
To remove a number from a group, select the No
Group option.
Own Number
This function is a memory aid, which you can use to
check your own phone number if you need to do so.
Putting a Call on Hold
You can make another call while you have a call in
progress if this service is supported by the network.
Of these two calls, one is active and the other is on
hold and you can swap between the calls.
Note: The procedure to put a call on hold may vary
depending on the service provider. For further
details, contact your service provider.
Memory Status
You can check how many names and numbers are
stored in the Phonebook.
1. Key in the phone number that you wish to dial or
look it up in the Phonebook.
Erase All
2. Press the
key to dial the second call. The first
call is automatically put on hold.
This option allows you to erase all of the Phonebook
entries.
When a confirmation appears, press the OK soft key
to erase all Phonebook entries. If you do not want to
erase, press the Cancel soft key.
When prompted, enter the lock code. All entries in
the Phonebook are then erased.
38
To swap between the two calls, simply press the
Swap soft key.
When you have finished, end each call normally by
pressing the
key.
39
In-Call Options
In-Call Options
Switching the Microphone Off (Mute)
Searching for a Number in the Phonebook
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
You can search for a number in the phonebook during
a call.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
1. Press the Options soft key.
To switch the microphone off temporarily, press the
Mute soft key.
The other party can no longer hear you. To indicate
this, the mute icon ( ) displays.
To switch the microphone back on, press the Unmute
soft key.
The other party can hear you again. The mute icon
disappears.
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones during
a call.
Note: To communicate with answering machines or
computerized telephony systems, the Send
keys option must be selected.
2. Press the
option.
key to highlight the Phonebook
3. Press the OK soft key.
The phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the start of the name, the phonebook
entries are listed, starting with the first entry
matching your input. The entry is also highlighted.
5. To view the highlighted entry, press the View soft
key.
For a more detailed description of the Phonebook
feature, refer to page 30.
Making a Calling Card Call
When you make a call using the prepaid calling card,
if you save the calling card information in the Calling
Card menu option (4.9), you can send automatically
the code number required for the service without
entering them manually each time you are prompted.
For further details on making a calling card call, refer
page 68.
40
41
IPnh-C
oanlelBOopotikons
In-PCahlolnOepBto
ioonks
Using the SMS Service
Making a Conference Call
If you receive an SMS (Short Message Service)
message during a call, the message icon (
) lights
in the display. The SMS Service option enables you
to use this feature.
You can conduct conference calls with two separate
parties at the same time. A conference call is a
network service. For more information, contact your
service provider.
Read Messages: allows you to read the messages
that you have received.
Note: The procedure may vary depending on your
service provider. Contact the service provider
for details.
Write Messages: allows you to write a message.
For further details on the SMS service, refer to
page 52.
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
3. When the second person answer, press the
key to merge the calls.
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (7.2) to Activate (see page 83). You will be
notified of an incoming call by a call waiting tone.
Note: The first call remains held until you press
the
key.
4. End the conference call by closing the phone or
pressing the
key.
To answer a call while you have a call in progress,
proceed as follows.
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
key.
3. To end the current call, press the
42
key.
43
Using the Menus
Using the Menus
The phone offers a range of functions that allows
you to customize the phone to your needs. These
functions are arranged in menus and submenus.
The menus and submenus can be accessed by
scrolling or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In idle mode, press the Menu soft key to access
the menu facility. Scroll with the
or
key
(or the or key on the left side of the phone)
to reach the desired main menu, e.g. Phone
Settings. Press the Select soft key to enter the
menu.
2. If the menu contains any submenus: for example,
Language, find the one you want by scrolling
with the
or
key (or the or key on the
left side of the phone). Press the Select soft key
to enter the submenu.
If the menu you selected has submenus, repeat
this step.
3. Scroll with the
or
key (or the or key
on the left side of the phone) to find the setting of
your choice. Press the OK soft key to confirm the
chosen setting.
Notes:
• You can return the previous menu level by pressing
the C or
key.
• You can exit the menu without changing the menu
settings by pressing the
key.
44
Accessing a Menu Function by Using its
Shortcut
The menu items (menu, submenus and setting
options) are numbered and can be accessed quickly
by using their shortcut number. The shortcut number
is shown in the bottom right next to the soft key
on the display.
Backlight
Short
Select
4.2.1
Shortcut number
1. In idle mode, press the Menu soft key.
2. Within three seconds, key in the first digit of the
shortcut number. Repeat this for each digit of the
shortcut number.
Example: Setting the Backlight option to Short
Press the Menu soft key, and key in 4, 2, 1, 2.
Menu for entering the menu, 4 for Phone
Settings, 2 for LCD Control, 1 for Backlight, 2
for Short.
Note: The numbers assigned to each menu function
are indicated on the list on page 46.
45
P
U shionnge Btohoek M e n u s
Using the Menus
List of Menu Functions
The following illustration shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
1. Call Records
1.1
1.2
1.3
1.4
2. Messages
2.1 Voice Mail
2.1.1 Connect to
Voice Server
2.1.2 Voice Server
Number
2.2 Read Messages
2.2.1 New Inbox
2.2.2 Old Inbox
2.2.3 Outbox
2.3 Write Messages
2.4 Preset Message List
2.5 Setup
46
Page 50
Missed Calls
Incoming Calls
Outgoing Calls
Call Time
1.4.1 Last Call Time
1.4.2 Total Call Time
1.4.3 Display Call Time
1.4.4 Reset Timers
3. Sound Settings
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4. Phone Settings
Page 52
Page 58
Ring Volume
Ring Tone
Alert Type
Tone Length
Message Tone
Error Tone
Minute Minder
Connect Tone
Melody Composer
Page 64
4.1 Greeting Message
4.2 LCD Control
4.2.1 Back Light
4.2.2 Contrast
4.3 Service Light
4.4 Auto Redial
4.5 Answer Mode
4.6 Slide Menu
4.7 Language
4.8 Reset Setting
4.9 ShortCut
4.10 Calling Cards
47
Using the Menus
5. Organizer
Using the Menus
Page 71
7. Network Services
6. Security
6.1 Change Lock code
6.2 Change Security code
6.3 Call Restriction
6.3.1 restrict all
outgoing call
6.3.2 restrict all
incoming call
6.3.3 restrict
outgoing call
6.4 SOS Call List
48
Page 82
7.1 Call Diverting*
7.1.1 Divert Always
7.1.2 Busy
7.1.3 No Reply
7.1.4 Unreachable
7.1.5 Cancel All
7.2 Call Waiting*
7.3 Network Selection
7.3.1 Automatic
7.3.2 Manual
7.3.3 New Search
7.4 Voice Privacy
7.5 NAM Selection
7.6 Set Service Code
7.6.1 Call Diverting
7.6.2 Call Waiting
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Format
5.4 Alarm
5.4.1 Once Alarm
5.4.2 Daily Alarm
5.4.3 Weekly Alarm
5.4.4 Remove Alarm
5.5 Calculator
Page 79
* : available when you set the service code in the Set Service Code
menu option (7.6).
8. Games
Page 87
8.1
8.2
8.3
8.4
8.5
8.6
8.7
Casino
Roulette
Black Jack
Sniper
Snake
Mole
Othello
49
Call Records
Call Records
Outgoing Calls
Via this menu, you can view the following phone
calls:
• Missed
• Incoming
• Outgoing
The number and name (if available) are displayed,
together with the date and time at which the call was
made.
Note: Your phone can keep up to ten numbers in
each list.
Missed Calls
Menu 1.1
Menu 1.3
This option lets you view the last 10 numbers dialed.
You can also:
• Delete the number
• Edit the number and save it in the phonebook
Call Time
Menu 1.4
Your phone records the amount of call time used.
Using this option, you can view the timers for calls
made and received. The following options are
available.
Last Call Time: shows the duration of the last call.
This option lets you view the last 10 unanswered
calls. You can also:
• Edit the number (if available) and dial it or save it
in the phonebook
• Delete the call from the list
Incoming Calls
Menu 1.2
This option lets you view the last 10 calls received.
You can also:
• Edit the number (if available) and dial it or save it
in the phonebook
• Delete the call from the list
50
Total Call Time: shows the total duration of all calls
made from or received to your phone since the timer
was last reset.
Display Call Time: allows you to set the phone to
display the call time when the call is made or
received. Select Enable to display the call time and
Disable not to display it.
Reset Timers: allows you to reset the call timers;
you must first enter the phone’s lock code (see
page 79) and then press the OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
51
Messages
Messages
Voice Server Number: allows you to change the
voice mail server number.
The SMS (Short Message Service) function is a
network service and may not be supported by your
network. Messages can be sent by text, E-mail and
paging messaging systems, provided that these
services are supported by your network.
When the Message icon
appears, you have
received new text messages. If the message memory
is full, an error message is displayed and you cannot
receive any new messages. Use the Delete option in
the Read Messages menu (2.2) to delete obsolete
messages.
To...
Then press the...
Enter the server number
Corresponding numeric
keys.
Correct a digit
C key.
Save the entered number
OK soft key
Read Messages
Menu 2.2
Three message boxes are available:
Voice Mail
Menu 2.1
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
Note: Voice Mail is a network feature. Contact your
service provider for more information.
Depending on the service provider, you may
be charged for accessing the voice server.
Connect to Voice Server: Before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
option 2.1.2). You can then select this option and
simply press the Save soft key to listen to your
messages.
Note: You can connect to the Voice Sever of the
service provider directly by pressing and
holding down the 0 key in idle mode .
52
New Inbox: used to store the messages that you
have received but not read.
Old Inbox: used to store the messages that you have
received and read.
Outbox: used to store the messages that you have
already sent or will send.
Select the required box. The header of the first
message in the box is displayed:
• Message number
• Message status: New, Old, Not Sent, Sent
• Date and time at which the message was received
(inbox only)
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
or recipient’s phone number
• Message text
53
Messages
To scroll through the message, press the
keys.
Messages
and
You can choose the following options, by pressing
the Options soft key.
Write Messages
Menu 2.3
Via this menu, you can write text messages of up to
160 alphanumeric characters. For further information
on how to enter the characters in your message,
refer to page 31.
Delete: allows you to delete obsolete messages.
Text Reply: allows you to reply by sending a text
message.
Call Back: allows you to call the sender back.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
received or saved. You can:
• Send the message
• Save and send the message
• Save but not send the message
Edit Message: allows you to edit a message.
Note: The available options may vary, depending on
the message status (New/Old, Not Sent or
Sent for example).
54
Note: While writing a message, pressing the
inserts a carriage return.
key
After you complete the message and press the OK
key, you can select the following options.
Send Only: Enter the destination and select a
setting group in which you set up default information
on the SMS feature via the Setup menu (see the
following page).
Save and Send: allows you to save a copy of the
message and then send the message to the required
destination. You are also required to select a setting
group. You can read the message in your outbox using
the Read Messages option. Sent is displayed when
you read the message to indicate the message status.
Save Only: allows you to save the message so that
it can be sent later. When you read the message in
your outbox, Not sent is displayed.
55
Messages
Preset Message List
Messages
Menu 2.4
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using the
and
keys. When the required message
number appears, press the Options soft key.
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter the
characters in your message, refer to page 31.
Send Message: allows you to recall the selected
message. Once you have completed the message, you
can send, save and send, or simply save it.
Delete: allows you to delete the selected message.
Setup
Menu 2.5
Via this menu, you can set up default information for
the SMS feature. A setting group is a collection of
settings required to send messages. Five setting
groups are available.
Select the desired number using the
and
key,
press the Select soft key and then set up the
options for the group. The available options are:
Callback Number: allows you to set the phone
number to which the recipient of your SMS message
may send you a reply message via your message
center, if the service is provided by the network.
Manual Ack: allows you to activate or deactivate
the manual acknowledgement function. When this
function is activated, the recipient can send you an
answer to your message by one touch of a number
key.
Delivery Ack: allows you to activate or deactivate
the delivery acknowledgement function. When this
function is activated, the network informs you
whether your message has been read or not by the
recipient.
Privacy: allows you to set the restriction feature.
When this option is set to Restricted, the recipient
must have the password which you have set when
writing a message to read the message. If you do not
want to use the feature, select Not Restricted.
Urgency: allows you to set the urgency status of the
messages. Bulk, Normal, Urgent, and Very Urgent
are available.
Type: allows you to set the type of messages. Text
and E-mail are available.
Setting Name: allows you to give a name to the
setting group currently being defined.
56
57
Sound Settings
Sound Settings
Alert Type
You can use the Sound Settings feature to customize
various settings, such as the:
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an
error or receive a message
Ring Volume
Menu 3.1
Menu 3.3
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via the Ring Tone menu option (3.2).
Vibration: the phone vibrates but does not ring.
This option allows you to adjust the ringing volume
to one of five levels.
Press the
key to increase and the
key to
decrease the volume. The greater the number of
bars, the greater the volume.
Note: You can also use the and keys on the left
side of the phone to adjust the volume.
Ring Tone
Menu 3.2
This option allows you to select the required ringing
tone. You can choose between 20 different tones.
Each time you select a tone, it is played for a few
seconds. Tones 19 and 20 correspond to the melodies
that you can compose, using the Melody Composer
menu option (3.9).
58
Note: In idle mode, you can set the phone to vibrate
only (silent mode) or to start ringing again,
simply by pressing the C key (for further
details, see page 25).
Vibra+Melody: the phone first vibrates three times
and then starts ringing.
Step Melody: the phone rings using the selected
ringing tone, but the volume becomes louder and
louder from the minimum. Reaching to the maximum,
the phone restarts from the minimum.
Tone Length
Menu 3.4
The tone length setting enables you to select short
or long DTMF (dual-tone multi-frequency) tones.
DTMF tones are what your phone transmits to access
teleservices (such as a bank account). The system
used by the bank or other service determines if you
need short or long DTMF. If the service is digital
(which most are these days), short DTMF will almost
always work. However, some new systems and
almost all older (analog) system require you to use
long DTMF tones.
59
Sound Settings
Message Tone
Sound Settings
Menu 3.5
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
Light Only: the service light in the top right-hand
corner of the phone flashes.
Minute Minder
Menu 3.7
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call.
The following options are available.
OFF: the phone does not beep.
ON: the phone beeps every minute.
Single Beep: the phone beeps once.
SMS Tone1~10: the phone uses an SMS tone. You
are provided with ten SMS tones.
Connect Tone
Error Tone
Menu 3.6
This option allows you to select how the phone
informs you that you have made a mistake.
The following options are available.
Menu 3.8
You can set your phone to beep when your call is
connected to the system.
The following options are available.
OFF: the phone does not beep.
ON: the phone beeps when your call is connected.
OFF: the phone does not beep.
ON: the phone beeps to indicate an invalid entry.
Melody Composer
Menu 3.9
This option allows you to compose your own melody
to be used as the ring tone.
Three octaves are available. A maximum of 100
notes can be entered. You can adjust the length of
the notes and add rests, as required.
60
61
Sound Settings
Sound Settings
Composing a Melody
Saving a Melody
You can compose two melodies. When you access
the menu, the names of any melodies created are
displayed. Otherwise, Melody 1 and Melody 2 appear.
Select the melody that you wish to create or edit.
When you are satisfied with your melody, you can
save it and indicate that you wish to use it as the
ring tone.
To...
Then press the...
Compose a
melody
Edit soft key.
Insert a note
Next soft key.
Move a note a
semitone up
key.
Move a note a
semitone down
key.
Change the
length of a note
key one or more times until
the note is of the required length.
Delete a note
C key.
Enter a rest
key repeatedly for the
required length of time.
Listen to your
melody
Listen soft key.
Modify your
melody
Modify soft key.
62
1. Press the Save soft key.
2. Enter a title for the melody.
Note: For further details on how to enter
characters, refer to page 31.
You are asked if the melody is to be set as the
ring tone.
3. To use the melody as the ring tone, press the Yes
soft key.
The melody is saved and is played each time your
phone rings. You can also select the melodies
composed via the Ring Tone menu option (3.2);
they are tones 19 and 20 respectively.
Otherwise, press the No soft key. The melody is
saved only.
63
Phone Settings
Phone Settings
Many different features of your phone can be
customized to suit your preferences. All of these
features are accessed via the Phone Settings menu.
Greeting Message
Menu 4.1
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
To...
Then press the...
Clear the existing
message
C key and hold it down until
the message is cleared.
Enter a new message
Appropriate alphanumeric
keys.
For further details on how to enter characters, refer to
page 31.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
Contrast
This option allows you to adjust the contrast of the
LCD screen by pressing the
and
keys. Each
time you press the key, you can see the LCD screen
changing according to the current value.
Service Light
Menu 4.3
This option allows you to select whether or not the
service light in the top right-hand corner of the phone
is used.
The following options are available.
LCD Control
Menu 4.2
Back Light
OFF: the service light is not used.
ON: the service light flashes when the phone is ready
for use.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
The following options are available.
OFF: the backlight is not used.
64
65
Phone Settings
Auto Redial
Phone Settings
Menu 4.4
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
Slide Menu
Menu 4.6
With the Slide Menu feature, you can determine
how the menus are displayed. If the feature is
enabled, the menus seem to slide into position from
the top, bottom, left or right, as applicable.
The following options are available.
OFF: the number is not redialed.
Language
Menu 4.7
ON: the number is redialed automatically.
Answer Mode
Menu 4.5
This option allows you to select how incoming calls
are to be answered.
You can select a display language. The available
language options are: English, Español, and
Português.
Reset Settings
Menu 4.8
The following options are available.
Open Answer: to answer a call, you can simply open
the phone. With the phone open, pressing the volume
keys answers the call.
Any Key Answer: to answer a call, you can press
any key except the
key. Pressing the
key
mutes the ringer.
You can easily reset your phone to its default
configuration.
Enter the 8-digit phone lock code and press the OK
soft key. The phone resets all settings to default.
Note: The lock code is preset to 00000000. To change
this code, refer to page 79.
Send Key Answer: to answer a call, you must press
the
key. Pressing the
key mutes the ringer.
66
67
Phone Settings
Calling Cards
Phone Settings
Menu 4.9
When you use a calling card for long distance calls,
you must send the service code and the card number
to the service system. Using this menu, you can save
these calling card information to send them
automatically when you make calling card calls. You
can store up to five calling cards.
Enter 8-digit phone lock code and press the OK soft
key to access the Calling Card menu.
Saving Calling Card Information
1. Scroll to the desired calling card using the
keys and press the Select soft key.
and
6. When entering the number is finished, press the
OK soft key.
7. To return to idle mode, press the
key.
Selecting a Calling Card
1. Scroll to the desired calling card using the
keys and press the Select soft key.
2. Select Set Default using the
and press the Select soft key.
and
and
keys
3. The display shows the number saved for the
calling card. If you are satisfied, press the Set soft
key.
2. If you want to set the card name, press the Select
soft key. Enter the name as needed. For further
details on entering a name, see page 31.
4. To return to idle mode, press the
3. When entering name is finished, press the OK soft
key. The name is saved.
1. Make a call to the calling card service system.
4. Press the
key to select the Card Number menu
and press the Select soft key.
5. Enter the card number (and/or PIN if required) as
listed on the back of the calling card.
To enter a pause, “P” before the second number,
press and hold the key. the number after “P”
will be sent only by pressing the
key when
you make a calling call.
Note: The order of the numbers which you must
enter may vary depending on the dialing
sequence your card uses.
68
key.
Making Calling Card Calls
2. When you are connected, press the Options soft
key and select Card Call using the
and
keys.
3. Press the OK soft key.
4. When you hear the tone from the calling card
service, press the
key to transmit the card
numbers.
5. Dial the number of the designated phone.
Note: The procedure may not apply to all calling
cards. Please look at the back of your calling
card or contact your phone company for
instructions.
69
Phone Settings
Organizer
ShortCut
Menu 4.10
The four navigation keys can also be used as shortcut
keys. When held down in idle mode, they allow you
to access specific menu options directly.
Using the ShortCut menu option (5.6), the following
menu options can be assigned to the shortcut keys:
•
•
•
•
•
•
•
•
•
None
Calendar (menu option 5.1)
Calculator (menu option 5.5)
Messages (menu option 2)
Sound Settings (menu option 3)
Games (menu option 8)
To Do List (menu option 5.2)
Phonebook
New Inbox (menu option 2.2.1)
1. Select the key to be used as a shortcut key:
• Key up ( )
• Key down ( )
• Key left ( )
2. Select the menu option to be assigned to the key.
Note: To deactivate a shortcut key, select the None
option.
The Organizer feature enables you to:
• View the calendar and organize your schedule
• Define a list of things to do
• Set the current date and time
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Use the phone as a calculator
• Assign functions to the navigation keys so that
they can be used as shortcuts giving direct access
to your favorite menus
Calendar
Menu 5.1
With the Calendar feature, you can:
• Consult the calendar
• Write memos to keep track of your schedule and
trigger an alarm if necessary
Consulting the Calendar
When you select the Calendar menu option (5.1), the
calendar is displayed. The following options are
available when you press the Options soft key.
Search all: displays all memos set, regardless of the
day and starting with the oldest. To scroll through the
memos, press the
and
keys.
Delete all: allows you to delete all memos. You are
asked to confirm your action.
Go to date: allows you to jump to a specific date.
70
71
Organizer
Writing a Memo
To write or edit a memo on a specific date, proceed
as follows.
1. Select the required date in the calendar, using the
navigation keys.
Note: To skip to the previous or next month, press
the or key on the left side of the
phone.
2. Press the Select soft key.
An empty memo screen is displayed to allow you
to enter your memo.
3. Enter your memo and then press the OK soft key.
Note: For further details on how to enter
characters, refer to page 31.
You are asked if you wish to set the alarm.
4. If you want the alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key.
Organizer
Once you have finished editing the memo, press the
OK soft key. The following options are then available
when you press the Options soft key.
Alarm: allows you to set the alarm to ring on the
chosen day.
Erase: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date and time of
the memo.
To Do List
This feature allows you to:
• Draw up a list of tasks to be done
• Assign a priority and deadline to each task
• Sort the tasks by priority and status mark ( for
tasks to be done, ✓ for completed tasks)
5. If you pressed Yes, set the time for the alarm and
press OK.
A check mark is displayed in front of the date in
the calendar to indicate that a memo exists.
Creating the To Do List
Editing a Memo
2. Enter the first task.
If you select a day for which a memo already exists,
you can press the Edit soft key to edit the memo
displayed.
Note: For further details on how to enter characters,
refer to page 31.
72
Menu 5.2
To create the To Do List, proceed as follows.
1. Press the New soft key.
Note: You can enter up to 48 characters. For
further details on how to enter characters,
see page 31.
3. Press the OK soft key.
73
Organizer
Organizer
To...
Then...
6. Press the OK soft key.
Sort the existing
tasks by priority
or status
• Press the Options soft key.
• Select the Sort option.
• Select the sort criterion (high,
low, done, undo).
Editing the To Do List
Copy a task
•
•
•
•
Delete a task
• Highlight the task.
• Press the Options soft key.
• Select the Delete option.
Change the status • Highlight the task.
of a specific task • Press the key to mark the
task as completed as of the
current date and time.
( or ✓)
or
• Highlight the task.
• Press the Options soft key.
• Select the Mark option.
• Select the appropriate status.
Delete all tasks
• Press the Options soft key.
• Select the Delete all option.
• Confirm the deletion by
pressing OK.
Create a new task • Press the Options soft key.
• Select the New option.
• Enter the text, priority and
deadline for the task.
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
Edit an existing
task
Set Time: allows you to enter the current time. You
can choose the time format via the Format menu
option (5.3.4).
4. Select high or low priority using the
keys and the Select soft key.
or
5. Enter your deadline.
If tasks are already defined in the To Do List when you
select the To Do List menu option (5.2), the current
contents are displayed with the associated priority
and status mark. The following options are available.
To...
Then...
View the details
for a specific task
• Highlight the task.
• Press the View soft key.
74
•
•
•
•
Highlight the task.
Press the Options soft key.
Select the Edit option.
Change the text, priority and
deadline for the task.
Time & Date
Highlight the task.
Press the Options soft key.
Select the Copy option.
Change the text, priority and
deadline for the task as
required.
Menu 5.3
Note: Before setting the time, you must specify your
time zone, via the World Time menu option
(5.3.3).
75
Organizer
Set Date: allows you to enter the day, month and
year. You can change the date format via the Format
menu option (5.3.4).
World Time: allows you to check the current time
for Greenwich Mean Time (GMT) and 21 major cities
around the world, using the
and
keys.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows.
1. Select the city corresponding to your time zone by
pressing the
or
key one or more times.
The local date and time are displayed.
2. Press the Set soft key.
Format: allows you to change the time and date
formats.
Time format: 24 hours
12 hours
Date format: YYYY/MM/DD (year/month/day)
DD/MM/YYYY (day/month/year)
MM/DD/YYYY (month/day/year)
76
Organizer
Alarm
Menu 5.4
You can set the alarm to ring at a specific time.
Note: To meet FAA safety guidelines, the alarm does
not function when the phone is off.
In the Alarm menu, the following frequency options
are available.
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same
time.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
To set the alarm, proceed as follows.
1. Choose the alarm frequency option.
2. Enter the required time and day of the week (if
applicable).
Once you have set the alarm, you can see the alarm
icon
next to the current time.
To stop the alarm when it rings, open the phone and
press the Exit soft key.
Remove Alarm: deactivates the alarm.
77
Organizer
Calculator
Security
Menu 5.5
Using this feature, you can use the phone as a
calculator. The calculator provides the basic arithmetic
functions: addition, subtraction, multiplication and
division.
1. Enter the first number using the numeric keys.
2. Press the right soft key until the required
arithmetic symbol appears: + (add), - (subtract),
* (multiply), / (divide).
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
Notes:
• To erase any mistakes and clear the display,
press the C key.
• To include a decimal point or a bracket, press the
left soft key until the required symbol is displayed.
5. To calculate the result, press the
key.
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Change Lock code
Menu 6.1
The lock code is a password for locking or unlocking
the phone. This feature allows you to change your
current lock code to a new one. You must enter the
current code before you can specify a new one.
The lock code is factory set to 00000000. Once you
have entered a new lock code, you are asked to
confirm it by entering it again.
Change Security code
Menu 6.2
The security code is used for restriction of the use of
your phone. This menu allows you to change your
current security code to a new one. You must enter
the current code before you can specify a new one.
The security code is factory set to 00000000. Once
you have entered a new password, you are asked to
confirm it by entering it again.
78
79
Security
Call Restriction
Security
Menu 6.3
2. Enter your security code and press OK.
The call restriction feature allows you to restrict your
calls.
3. Select the location by pressing the
and press Options.
Call restriction can be set up in the following ways.
4. Select Edit, then the OK soft key. If a number has
already been saved, this option allows you to edit
the number.
Restrict all outgoing call: calls cannot be made.
Restrict all Incoming call: calls cannot be
received.
or
key
If you want to erase a saved number, select
Erase. When a confirmation displays, press Yes.
Restrict outgoing call: calls to the phone numbers
which you have specified cannot be made. You can
set up to 10 phone numbers.
5. Enter the phone number and press OK. The phone
number is saved and now you cannot make a call
to the number.
To restrict the all outgoing or all incoming calls,
proceed as follows.
SOS Call List
1. Select Restrict all outgoing call or Restrict all
incoming call by pressing the
or
key until
the appropriate option is highlighted and then
press Select.
2. Select Enable to the feature on, and press
Select.
If you want to set the restriction off, select
Disable.
Menu 6.4
Your phone provides three emergency numbers for
SOS calls programmed by the service provider. Three
numbers can be manually dialed at any time even
when the phone is locked.
To make an SOS call when the phone is locked, press
the SOS soft key, select the desired number saved in
the SOS call list, and then press the Call soft key.
3. Enter your security code and press OK.
To set the phone numbers to be restricted, proceed as
follows.
1. Select Restrict outgoing call by pressing the
or
key, and then press Select .
80
81
Network Services
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Diverting
The following options are available.
Activate: activates the Call Diverting feature.
Cancel: deactivates the Call Diverting feature.
You can deactivate all call diverting settings by
selecting the Cancel All option.
Menu 7.1
This network service enables incoming calls to be
rerouted to the number that you specify.
Call Waiting
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
This network service enables you to be informed when
someone is trying to reach you during another call.
Note: For using the Call Diverting service, you must
set the service code for it. Depending on the
Set Service Code setting, this menu may not
appear For details, see page 86.
Note: For using the Call Waiting service, you must
set the service code for it. Depending on the
Set Service Code setting, this menu may not
appear. For details, see page 86.
Call diverting can be set up in the following ways.
The following options are available.
• Divert Always: all calls are diverted.
Activate: activates the Call Waiting feature. You can
answer an incoming call while you have a call in
progress. See page 42 for answering a waiting call.
• Busy: calls are diverted if you are already making
another call.
• No Reply: calls are diverted if you do not answer
the phone.
• Unreachable: calls are diverted if you are not in
an area covered by your service provider.
• Cancel All: all call diverting options are cancelled.
82
Menu 7.2
Cancel: deactivates the Call Waiting feature.
Network Selection
Menu 7.3
The Network Selection feature enables you to
indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually.
83
Network Services
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When Network Selection is displayed, press the
Select soft key.
2. Press the
or
key until the appropriate
option is highlighted and then press the OK soft
key.
• If you select Automatic, your phone
automatically searches for a network available
to you and chooses the appropriate one. Every
time you switch your phone on, this menu resets
to Automatic.
Voice Privacy
Menu 7.4
Voice Privacy encrypts the voice channel so that
people cannot eavesdrop on your conversation. If you
turn this feature on and voice privacy becomes
inactive for any reason your phone displays “Voice
privacy not active” and beeps. This feature is used
only in digital networks.
The following options are available.
Activate: turns this feature on.
Deactivate: turns this feature off.
Note: This feature may not be available in all areas.
Contact your service provider for details and
availability.
NAM Selection
Menu 7.5
• If you select Manual, your phone searches for
available networks, then displays them. Press
the
or
key until the preferred network is
highlighted and then press the OK soft key.
The service provider programs your phone with the
phone number and system information when your
phone is first activated. This is called a Number
Assignment Module (NAM).
• If you select New Search, your phone begins a
new search for new Private and Residential
systems. When finding the best new system, the
phone displays it. Then you can confirm by
pressing Select or start another search by
pressing Next.
For example, your phone can be activated in up to 4
different service areas each giving your phone a
different phone number or account.
3. You are connected to that network.
84
Network Services
Only one number can be active at a time. When you
select a phone number, you are also selecting which
system to be used as your home system. The first
phone number displayed with this menu is the
currently selected number.
85
Network Services
Notes:
• It may not be necessary to have four NAMs for
your phone if your service provider has service or
roaming agreements for each area in which you
wish to use your phone. Contact your service
provider for details.
• You need at least one active number to make a
call. You cannot change from one NAM to another
during a call.
Set Service Code
Games
Using this feature, you can play seven different
games with the phone:
•
•
•
•
Casino
Black Jack
Snake
Othello
• Roulette
• Sniper
• Mole
Once you have selected a game, the following
options are available.
Menu 7.6
For using the network services, such as the Call
Diverting and Call Waiting, you must set the service
codes supplied by your service provider with this
menu. For more information on the service code,
contact your service provider.
The following options are available.
Call Diverting: allows you to set the codes for using
each of the options (Divert Always, Busy, No
Reply, Unreachable and Cancel All) in the Call
Diverting.
Call Waiting: allows you to set the codes for using
each of the options (Activate and Cancel ) in the
Call Waiting.
After selecting the desired option, enter the service
code and press the OK soft key. The service code is
saved.
Play: allows you to start a game.
Level: allows you to select the level of difficulty.
Select the required level using the
and
keys
and press the OK soft key. This option is only available
in games with several levels (Sniper, Snake).
Configuration: allows you to configure the phone
for the chosen game (backlight and sound settings).
To adjust each setting, highlight the Backlight or
Sound option by pressing the
and
keys and
then toggle between ON and OFF by pressing the
On/Off soft key.
Instructions: describes the buttons used by the
game. If necessary, press the
and
keys to see
a more detailed description.
High Score: enables you to view the highest score
recorded for the selected game. You can also reset
this score by pressing the Reset soft key.
If you break the current record for the game, the
phone displays the High Score screen.
To stop playing a game, press the C or
86
key.
87
Voice Memo Pad
Voice Memo Pad
With the key, you can use the phone as a recorder.
In idle mode, it records a voice memo, and while you
are on the phone, it records the phone conversation
during a call.
Notes:
• Your phone can record up to 10 items, and the
maximum recording time for each item is 1 minute.
• Closing the phone while recording cancels the
recording.
• If you have an incoming call while recording a voice
memo, or the call is disconnected while recording
phone conversation, the memo recorded up to that
point is saved with the current date and time stamp.
• When you are out of the service area(‘No Service’ is
displayed)or in analog mode, a voice memo is not
correctly recorded. It is recommended that you use
this feature in digital mode in the service area.
4. If you ar recording a phone conversation, it is
automatically saved by the title of the current date
and time.
If you are recording a voice memo, you are asked
to enter the title for the recorded message. Go to
step 5.
5. Enter the desired title up to 16 digits using the
keypad, then press the Save key to save the
recording. For details on entering characters, see
page 31.
If you do not enter a title, Untitled is saved as the
label.
Note: Recording voice conversations is illegal in
some countries. Make sure the other party has
stated its consent to being recorded.
Record
Replay & Delete
To record a voice memo, select this menu or press and
hold the key in idle mode.
Using this menu, you can play back a recorded
message and delete it if you want.
To record a phone conversation, press the
you are on the phone.
1. When the display shows the title of the currently
selected memo, press the
or
key to display
the memo you want to play.
key while
1. The message “Recording” displays, along with the
timer.
2. Record a memo by speaking to the micro phone or
talking to the remote person.
2. Press the Play soft key to play back the recorded
message currently displayed.
3. When you have finished reviewing, press the Stop
soft key.
3. To stop recording, press the Stop soft key.
88
89
Voice Memo Pad
Voice Memo Pad
4. If you want to delete the memo, press Delete
soft key.
5. When the phone confirms your selection, press
the Yes soft key.
If you do not want to delete the memo, press the
No soft key.
Edit Title
You can change the title of the selected memo .
1. The display shows the title of the currently
selected memo. Press the
or
key to scroll
to the memo whose title you want to edit.
2. Press the Edit soft key.
6. Repeat step 2 through 5 as necessary.
7. When you have finished, press the
return to idle mode.
key to
3. Enter the desired title up to 16 digits using the
keypad. For details on entering characters, see
page 31.
4. When entering is done, press the Save soft key to
save the new title.
5. When you have finished, press the
return the idle mode.
90
key to
91
Solving Problems
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
“No service”, “Network failure” or “Not done”
is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
Your correspondent cannot hear you speaking
• Have you switched off the microphone (mute)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
center of the phone.
The phone starts beeping and “**Warning**
Low Battery” flashes in the display
• The battery power is weak. Replace the battery
and recharge it.
The audio quality of the call is poor
You have entered a number but it was not dialed
• Check the signal strength indicator in the display
); the number of bars after it indicates the
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have chosen to restrict outgoing calls.
No number is dialed when you recall a phonebook
entry
Your correspondent cannot reach you
• Is your phone switched on (
pressed for
more than one second)?
• Are you accessing the right cellular network?
• You may have chosen to restrict incoming calls.
• You may be in a weak signal area. Move and try
again.
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store number, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
92
93
Using the Batteries
Using the Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
94
95
Safety Information
Safety Information
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or service
may be dangerous and may invalidate any warranty
applicable to the unit.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
Operating Environment
• Operation of any radio-transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a doctor or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
• As with other mobile radio-transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Switch off your cellular phone when in an aircraft.
The use of cellular phones in an aircraft is illegal
and may be dangerous to the operation of the
aircraft or disrupt the cellular network. Failure
to observe these instructions may lead to the
suspension or denial of cellular telephone services
to the offender, legal action or both.
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
96
97
Safety Information
Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal temperature,
moisture can form inside the phone, which may
damage the electronic circuits.
• Do not attempt to open the phone’s casing.
Non-expert handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
98
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service center. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Emergency Calls
Important! This phone, like any cellular phone, uses
radio signals, cellular and landline
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential
communications (medical emergencies
for example).
Remember: to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
99
Glossary
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Antenna
A device for transmitting or receiving signals. The
size and shape of antennas is determined, in part, by
the frequency of the signal they receive. Wireless
phones and the base station must have antennas.
Call Diverting
Ability to reroute calls to another mobile or fixed
line.
Call Holding
Hands-Free
A feature that permits a driver to use a wireless
phone without lifting or holding the handset - an
important safety feature for automobiles, tractors
and most other motorized vehicles.
LCD (Liquid Crystal Display)
Commonly used to refer to the screen display on the
wireless phone.
Calling Line Identification Services (Caller-ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
Phone Password
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Lock code used to unlock the phone when you have
selected the option to lock it automatically each time
it switches on, and security code used to restrict the
use of your phone.
Call Waiting
Roaming
Ability to inform users that they have an incoming
call when engaged on another call.
Use of your phone when you are outside your home
area (when travelling for example).
Conference Calling
SMS (Short Message Service)
Ability to establish a conference call involving up to
two additional parties.
Network service for sending and receiving messages
to and from another subscriber without having to
speak to the correspondent. The message created or
received (up to 160 characters long) can be displayed,
received, edited or sent.
100
101
Glossary
Index
Soft Keys
Keys marked
. on the phone, the purpose of
which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
TDMA
Time division multiple access (TDMA) is a digital
transmission technology that allows a number of
users to access a single radio-frequency (RF) channel
without interference by allocating unique time slots
to each user within each channel. The TDMA digital
transmission scheme multiplexes three signals over a
single channel. The current TDMA standard for
cellular divides a single channel into six time slots,
with each signal using two slots, providing a 3 to 1
gain in capacity over advanced mobile-phone service
(AMPS). Each caller is assigned a specific time slot
for transmission.
Voice Mail
A computerized answering service that answers a
call, plays a greeting and records a message.
102
Accessories • 7
Adjusting volume • 22
Alarm (5.4) • 75
Alert Type (3.3) • 59
Answering
a call • 22
a second call • 42
Answer mode (4.5) • 66
Auto Redial (4.4) • 66
Backlight • 13; 64
contrast • 65
Batteries
charging • 16
installing • 14
low battery indicator • 17
precautions • 94
removing • 15
restriction (6.3) • 80
SOS (6.4) • 81
time (1.4) • 51
via the phonebook • 21
waiting (7.3) • 42, 81
Care • 96
Changing
lock code (6.1) • 79
security code (6.2) • 79
Characters
entering • 31
Charging batteries • 16
Composer
Melody (3.9) • 61
Conference calls • 43
Connect
to Voice Mail (2.1) • 52
tone (3.8) • 61
Contrast • 65
Correcting numbers • 20
Calculator (5.5) • 78
Calendar (5.1) • 71
Caller
group • 36
ID • 23
Calling card (4.9) •68
Calls
answering • 22
a second call • 42
calling card • 68
conference • 43
diverting (7.1) • 82
ending • 21
holding • 39
incoming (1.2) • 51
international • 20
making • 20
missed • 23; 50
outgoing (1.3) • 51
records (1) • 50
redialing automatically • 66
Date
format (5.3.4) • 76
setting (5.3.2) • 76
Deleting
memos • 73
missed calls • 25
phonebook numbers • 34
tasks • 73
voice memo • 88
Display • 11
contrast • 69
icons • 12
setting the
language (4.7) • 67
Diverting calls (7.1) • 82
103
Index
Index
M (continued)
Earphone • 7
Earpiece
adjusting the volume • 20
Editing
memos • 72
messages • 54
missed calls• 24
phonebook numbers • 34
To Do List • 74
Voice memo title • 91
Erasing
memos • 73
missed calls • 25
phonebook numbers • 34
tasks • 75
voice memo • 89
Error Tone (3.6) • 60
Key tones
adjusting the volume • 22
muting • 41
selecting • 59
sending • 41
Keys
description • 9
location • 8
navigation • 27
shortcut • 70
Microphone mute • 40
Minute Minder (3.7) • 61
Missed calls (1.1) • 50
deleting • 25
editing the number • 24
viewing • 23; 50
Mute
key tones • 41
microphone • 40
Phone
locking • 19
Settings (4) • 64
switching on/off • 18
Phonebook • 30
dialing • 35
editing numbers • 34
erasing numbers • 34
making calls • 20
moving numbers • 34
options • 33
searching • 35; 41
storing numbers/names • 30
Playing, voice memo • 89
Preset Message List (2.4) • 56
Problem solving • 92
Functions
selecting • 26
Language (4.7) • 67
Last number redialing • 21
Length of calls • 51
Letters
entering • 31
Light
backlight • 13; 64
service • 13; 65
Lock code • 79
Locking phone • 19
Low battery indicator • 17
Games (8) • 87
Greeting Message (4.1) • 64
Groups
caller • 36
Holding calls • 39
Icons
description • 12
ID, caller • 23
Identifying a caller • 23
Incoming Calls (1.2) • 50
104
Maintenance • 96
Melody Composer (3.9) • 61
Memory status • 38
Memos
editing • 72
writing • 72
Menus
by scrolling • 44
by shortcut • 45
list • 46
using • 44
Message Tone (3.5) • 60
Messages
greeting (4.1) • 64
preset (2.4) • 56
reading (2.2) • 53
setup (2.5) • 56
voice mail (2.1) • 52
writing (2.3) • 55
NAM, selecting (7.5) • 85
Names
entering • 31
options • 36
searching/dialing • 35
storing in the
phonebook • 30
Network Selection (7.3) • 83
Network Services (7) • 82
Number
correcting • 20
editing
missed call • 24; 50
phonebook • 34
erasing phonebook • 34
moving phonebook • 35
own • 38
redialing • 21
automatically • 66
searching/dialing •35
storing in the
phonebook • 30
Read Messages (2.2) • 52
Recording,
voice memo •88
Redialing
automatically • 66
last number • 21
Replaying,
voice memo • 89
Reset Settings (4.8) • 67
Restriction, call • 80
Ring
Tone (3.2) • 58
type • 59
Volume (3.1) • 58
Roaming • 83
Options
selecting • 26
Organizer (5) • 71
Outgoing Calls (1.3) • 51
Own Number • 38
Safety
batteries • 94
information • 96
precautions • 5
Security (6) • 79
Schedule •69
Searching for names/numbers •
35; 41
Security code • 79
Selecting functions/options
• 26
105
106
➂ To return the call,
press the
key.
• Each of the two soft keys (
performs the function indicated by the
text above it (bottom line in the display).
➁ Scroll with the
and
keys through
the missed calls.
➀ Open the phone and
press the View soft
key.
View Missed
Calls right
after they
were missed
➄ Press the Select soft key
to confirm.
Briefly press the
key.
End a Call
key.
➀ Key in the number.
Make a Call
➁ Press the
Press and hold
➃ Scroll with the
and
keys through the list
of options until the
required one is selected.
Waiting
call • 42; 81
World Time (5.3.3) • 76
Write Messages (2.3) • 55
Writing memos • 72
Switch On/Off
TDMA Mobile Telephone STH-A225
Vibration • 59
Voice mail (2.1) • 52
Voice memo pad • 88
Voice privacy (7.4) • 85
Voice Server Number
(2.1.2) • 53
Volume
adjusting • 22
selecting the ring (3.1) • 58
➂ Press the Select soft
key.
Tasks
defining• 73
deleting • 75
editing • 73
sorting • 75
Text messages • 52
icon • 52
preset (2.4) • 56
reading (2.2) • 53
setup (2.5) • 56
writing (2.3) • 55
Time
calls (1.4) • 51; 61
format (5.3.4) • 76
setting (5.3.1) • 75
world (5.3.3) • 76
To Do List (5.2) • 73
➁ Scroll with the
and
keys through the list
of menus until you reach
the required menu.
Tone
connect (3.8) • 61
error (3.6) • 60
length (3.4) • 59
melody •58
message (3.5) • 60
ring (3.2) • 58
Travel charger • 16
➀ Press the Menu soft key.
Sending
key tones • 41
messages • 55
Service code (7.6) • 86
Service light • 13; 65
Setting
alarm (5.4) • 77
date (5.3.2) • 76
display language • 67
time (5.3.1) • 75
Settings
resetting (4.8) • 67
Setup (2.5) • 56
ShortCut (4.9) • 68
Silent mode • 25
Slide Menu (4.6) • 67
SMS
setup (2.5) • 56
text message icon • 52
using • 42; 52
Soft keys, using • 26
Solving problems • 92
Sound Settings (3) • 58
Speed Dialing • 32
Switching on/off
microphone • 40
phone • 18
Access
the Menu
Function
S (continued)
Quick Reference Card
Index
107
FDA Consumer Update
Answer a
Call
key.
Open the phone
or
Press the
Press the
or
Adjust the
Volume
➀ Select the Alert Type
menu option (3.3).
key.
➁ Select an option:
Light only, Melody,
Vibration, Vibra+
Melody and Step
Melody.
➂ Press the Select soft
key to confirm.
Choose the
Alert Type
The U.S.Food and Drug Administration’s Center
for Devices and Radiological Health Consumer
Update on Mobile Phones
FDA has been receiving inquiries about the safety of mobile
phones, including cellular phones and PCS phones. The
following summarizes what is known-and what remains
unknown-about whether these products can pose a hazard to
health, and what can be done to minimize any potential risk.
This information may be used to respond to questions.
Why the concern?
Store
Numbers
in the
Phonebook
Search for
a Number
in the
Phonebook
➀ Key in the number.
➁ Press the Save soft key.
➂ Enter the name.
➃ Press the OK soft key.
➄ If necessary, change the
location.
➅ Press the OK soft key.
➀ Press the Name soft key.
➁ Enter the start of the
name.
➂ Press the Search soft key.
➃ To scroll through the
names, press the
and
keys.
➄ To make a call, press the
Mobile phones emit low levels of radiofrequency energy
(i.e.,radiofrequency radiation) in the microwave range while
being used. They also emit very low levels of radiofrequency
energy (RF), considered non-significant, when in the stand-by
mode. It is well known that high of RF can produce biological
damage through heating effects (this is how your microwave
oven is able to cook food). However, it is not known whether,
to what extent, or through what mechanism, lower levels of
RF might cause adverse health effects as well. Although
some research has been done to address these questions, no
clear picture of the biological effects of this type of radiation
has emerged to date. Thus, the available science does not
allow us to conclude that mobile phones are absolutely safe,
or that they are unsafe. However, the available scientific
evidence does not demonstrate any adverse health effects
associated with the use of mobile phones.
What kinds of phones are in question?
Questions have been raised about hand-held mobile phones,
the kind that have a built-in antenna that is positioned close
to the user’s head during normal telephone conversation.
These types of mobile phones are of concern because of the
108
109
short distance between the phone’s antenna-the primary
source of the RF-and the person’s head. The exposure to RF
from mobile phones in which the antenna is located at
greater distances from the user(on the outside of a car, for
example) is drastically lower than that from hand-held
phones, because a person’s RF exposure decreases rapidly
with distance from the source. The safety of so-called
“cordless phones,” which have a base unit connected to the
telephone wiring in a house and which operate at far lower
power levels and frequencies, has not been questioned.
How much evidence is there that hand-held
mobile phones might be harmful?
Briefly, there is not enough evidence to know for sure, either
way; however, research efforts are on-going. The existing
scientific evidence is conflicting and many of the studies that
have been done to date have suffered from flaws in their
research methods. Animal experiments investigating the
effects of RF exposures characteristic of mobile phones have
yielded conflicting results. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. In one study,
mice genetically altered to be predisposed to developing one
type of cancer developed more than twice as many such
cancers when they were exposed to RF energy compared to
controls. There is much uncertainty among scientists about
whether results obtained from animal studies apply to the
use of mobile phones. First, it is uncertain how to apply the
results obtained in rats and mice to humans. Second, many
of the studies that showed increased tumor development
used animals that had already been treated with cancercausing chemicals, and other studies exposed the animals to
the RF virtually continuously-up to 22 hours per day.
For the past five years in the United States, the mobile phone
industry has supported research into the safety of mobile
phones. This research has resulted in two findings in
particular that merit additional study:
110
1. In a hospital-based, case-control study, researchers looked
for an association between mobile phone use and either
glioma (a type of brain cancer) or acoustic neuroma (a
benign tumor of the nerve sheath). No statistically
significant association was found between mobile phone
use and acoustic neuroma. There was also no association
between mobile phone use and gliomas when all types of
types of gliomas were considered together. It should be
noted that the average length of mobile phone exposure in
this study was less than three years.
When 20 types of glioma were considered separately,
however, an association was found between mobile phone
use and one rare type of glioma, neuroepithelliomatous
tumors. It is possible with multiple comparisons of the same
sample that this association occurred by chance. Moreover,
the risk did not increase with how often the mobile phone
was used, or the length of the calls. In fact, the risk actually
decreased with cumulative hours of mobile phone use.
Most cancer causing agents increase risk with increased
exposure. An ongoing study of brain cancers by the National
Cancer Institute is expected to bear on the accuracy and
repeatability of these results.1
2. Researchers conducted a large battery of laboratory tests to
assess the effects of exposure to mobile phone RF on
genetic material. These included tests for several kinds of
abnormalities, including mutations, chromosomal
aberrations, DNA strand breaks, and structural changes in
the genetic material of blood cells called lymphocytes.
None of the tests showed any effect of the RF except for
the micronucleus assay, which detects structural effects on
the genetic material. The cells in this assay showed
changes after exposure to simulated cell phone radiation,
but only after 24 hours of exposure. It is possible that
exposing the test cells to radiation for this long resulted in
heating. Since this assay is known to be sensitive to
heating, heat alone could have caused the abnormalities to
occur. The data already in the literature on the response of
the micronucleus assay to RF are conflicting. Thus, followup research is necessary.2
111
FDA is currently working with government, industry, and
academic groups to ensure the proper follow-up to these
industry-funded research findings. Collaboration with the
Cellular Telecommunications Industry Association(CTIA) in
particular is expected to lead to FDA providing research
recommendations and scientific oversight of new CTIAfunded research based on such recommendations.
Two other studies of interest have been reported recently in
the literature:
1. Two groups of 18 people were exposed to simulated
mobile phone signals under laboratory conditions while
they performed cognitive function tests. There were no
changes in the subjects’ ability to recall words, numbers,
or pictures, or in their spatial memory, but they were
able to make choices more quickly in one visual test
when they were exposed to simulated mobile phone
signals. This was the only change noted among more
than 20 variables compared.3
2 . In a study of 209 brain tumor cases and 425 matched
controls, there was no increased risk of brain tumors
associated with mobile phone use. When tumors did
exist in certain locations, however, they were more
likely to be on the side of the head where the mobile
phone was used. Because this occurred in only a small
number of cases, the increased likelihood was too small
to be statistically significant.4
In summary, we do not have enough information at this
point to assure the public that there are, or are not, any
low incident health problems associated with use of mobile
phones. FDA continues to work with all parties, including
other federal agencies and industry, to assure that research
is undertaken to provide the necessary answers to the
outstanding questions about the safety of mobile phones.
112
What is known about cases of human cancer
that have been reported in users of hand-held
mobile phones?
Some people who have used mobile phones have been
diagnosed with brain cancer. But it is important to
understand that this type of cancer also occurs among
people who have not used mobile phones. In fact, brain
cancer occurs in the U.S. population at a rate of about 6
new cases per 100,000 people each year. At that rate,
assuming 80 million users of mobile phones (a number
increasing at a rate of about 1 million per moth), about
4800 cases of brain cancer would be expected each year
among those 80 million people, whether or not they used
their phones. Thus it is not possible to tell whether any
individual’s cancer arose because of the phone, or whether
it would have happened anyway. A key question is whether
the risk of getting a particular form of cancer is greater
among people who use mobile phones than among the rest
of the population. One way to answer that question is to
compare the usage of mobile phones among people with
brain cancer with the use of mobile phones among
appropriately matched people without brain cancer. This is
called a case-control study. The current case-control study
of brain cancers by the National Cancer Institute, as well
as the follow-up research to be sponsored by industry, will
begin to generate this type of information.
What is FDA’s role concerning the safety of
mobile phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as mobile phones before
marketing, as it does with new drugs or medical devices.
However, the agency has authority to take action if mobile
phones are shown to emit radiation at a level that is
hazardous to the user. In such a case, FDA could require the
manufacturers of mobile phones to notify users of the
health hazard and to repair, replace or recall the phones so
that the hazard no longer exists.
113
Although the existing scientific data do not justify FDA
regulatory actions at this time, FDA has urged the mobile
phone industry to take a number of steps to assure public
safety. The agency has recommended that the industry:
• support needed research into possible biological effects of
RF of the type emitted by mobile phones:
• design mobile phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
• cooperate in providing mobile phone users with the best
possible information on what is known about possible
effects of mobile phone use on human health.
At the same time, FDA belongs to an interagency working
group of the federal agencies that have responsibility for
different aspects of mobile phone safety to ensure a
coordinated effort at the federal level. These agencies are:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communication Commission
• Occupational Health and Safety Administration
• National Telecommunications and Information
Administration
for shorter conversations for for situations when other
types of phones are not available.
Phone who must conduct extended conversations in their
cars every day could switch to a type of mobile phone that
places more distance between their bodies and the source
of the RF, since the exposure level drops off dramatically
with distance. For example, they could switch to:
• a mobile phone in which the antenna is located outside
the vehicle,
• a hand-held phone with a built-in antenna connected to a
different antenna mounted on the outside of the car or
built into a separate package, or
• a headset with a remote antenna to a mobile phone
carried at the waist.
Again, the scientific data do not demonstrate that mobile
phones are harmful. But if people are concerned about the
radiofrequency energy from these products, taking the
simple precautions outlined above can reduce any possible
risk.
Where can I find additional information?
For additional information, see the following websites:
The National Institutes of Health also participates in this
group.
In the absence of conclusive information about
any possible risk, what can concerned
individuals do?
If there is a risk from these products-and at this point we do
not know that there is-it is probably very small. But if people
are concerned about avoiding even potential risks, there are
simple steps they can take to do so. For example, time is a
key factor in how much exposure a person receives. Those
persons who spend long periods of time on their hand-held
mobile phones could consider holding lengthy conversations
on conventional phones and reserving the hand-held models
114
Federal Communications Commission (FCC) RF Safety
Program (select “Information on Human Exposure to RF
Fields from Cellular and PCS Radio Transmitters”):
http://www.fcc.gov/oet/rfsafety
World Health Organization (WHO) International
Commission on Non-Ionizing Radiation Protection (select Qs
& As): http://www.who.int/emf
United Kingdom, National Radiological Protection
Board: http://www.nrpb.org.uk
Cellular Telecommunications Industry Association
(CTIA): http://www.wow-com.com
115
Wireless Phone Safety Tips
U.S Food and Drug Administration (FDA) Center for
Devices and Radiological Health:
http://www.fda.gov/cdrh/consumer/
Muscat et al. Epidemiological Study of Cellular Telephone Use and
Malignant Brain Tumors. In: State of the Science Symposium;1999
June 20; Long Beach, California.
Tice et al. Tests of mobile phone signals for activity in genotoxicity and
other laboratory assays. In: Annual Meeting of the Environmental
Mutagen Society; March 29, 1999, Washington, D.C.; and personal
communication, unpublished results.
Preece, AW, Iwi, G, Davies-Smith, A, Wesnes, K, Butler, S, Lim, E, and
Varey, A. Effect of a 915-MHz simulated mobile phone signal on
cognitive function in man. Int. J. Radiat. Biol., April 8, 1999
Hardell, L, Nasman, A, Pahlson, A, Hallquist, A and Mild, KH. Use of
cellular telephones and the risk for brain tumors: a case-control study.
Int. J. Oncol., 15:113-116, 1999.
Your Samsung wireless telephone gives you the powerful
ability to communicate by voice-almost anywhere, anytime.
But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When
using your wireless phone behind the wheel of a car,
practice good common sense and remember the following
tips:
1. Get to know your Samsung wireless phone and its
features such as speed dial and redial. If available,
these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible,
add an additional layer of convenience and safety to your
wireless phone with one of the many hands-free accessories
available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail answer it
for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow, ice,
and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping through your
address book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary. If
you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
116
117
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking with
aware you are driving and suspend conversations which
have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial 100 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free call
on your wireless phone!*
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are in
danger, call 100 or other local emergency number, as you
would want others to do for you.*
10. Call roadside assistance or a special nonemergencies wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other special
non-emergency wireless number.*
Check the laws and regulations on the use of wireless
telephones and their accessories in the areas where you
drive. Always obey them. The use of these devices may be
prohibited or restricted in certain areas.
For more information, please call 1-888-901-SAFE, or
visit our website www.wow-com.comTM.
* Wherever wireless phone service is available.
118
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2001:04:03 12:55:21Z
Modify Date                     : 2001:07:24 13:39:28-03:00
Page Count                      : 62
Creation Date                   : 2001:04:03 12:55:21Z
Producer                        : Acrobat Distiller 4.0 for Macintosh
Mod Date                        : 2001:07:24 13:39:28-03:00
Metadata Date                   : 2001:07:24 13:39:28-03:00
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LSTHA225

Navigation menu