Samsung Electronics Co STHA255 Dual-Mode Cellular (AMPS/TDMA) Phone User Manual Revised Users Manual per CRN 22143

Samsung Electronics Co Ltd Dual-Mode Cellular (AMPS/TDMA) Phone Revised Users Manual per CRN 22143

Contents

Revised Users Manual per CRN 22143

Printed in KoreaCode No. : GH68-xxxxxAEnglish. 02/2002. Rev. 1.0ELECTRONICSWorld Wide Webhttp://www.samsungmobile.comTDMA MOBILETELEPHONE STH-A255Draft version(2002/01/25)* Some contents in this manual may differ from your phone depending onthe software of the phone or your service provider.Please, be sure to read thismanual before using your phone.And keep the manual afterreading it and use any time youhave a question.
For more information about RF exposure, please visit the FCC website at www.fcc.govFCC RF EXPOSURE INFORMATIONIn August 1996 the Federal Communications Commission (FCC) of the United Stateswith its action in Report and Order FCC 96-326 adopted an updated safety standardfor human exposure to radio frequency electromagnetic energy emitted by FCCregulated transmitters. Those guidelines are consistent with the safety standardpreviously set by both U.S. and international standards bodies. The design of thisphone complies with the FCC guidelines and these international standards.Use only the supplied or an approved antenna. Unauthorized antennas, modifications,or attachments could impair call quality, damage the phone, or result in violation ofFCC regulations.Do not use the phone with a damaged antenna. If a damaged antenna comes intocontact with the skin, a minor burn may result. Please contact your local dealer forreplacement antenna.Body-worn OperationThis device was tested for typical body-worn operations with the back of the phonekept 1.5cm. from the body. To maintain compliance with FCC RF exposureguidelines, use only belt-clips, holsters or similar accessories that maintain a 1.5cmseparation distance between the user’s body and the back of the phone, including theantenna, whether extended or retracted. The use of third-party belt-clips, holsters andsimilar accessories should not contain metallic components in its assembly. The use ofaccessories that do not satisfy these requirements may not comply with FCC RFexposure guidelines, and should be avoided.WARNING! Read this information before using your phone
iiiFCC RF EXPOSURE INFORMATIONIn August 1996 the Federal Communications Commission (FCC) ofthe United States with its action in Report and Order FCC 96-326adopted an updated safety standard for human exposure to radiofrequency electromagnetic energy emitted by FCC regulatedtransmitters. Those guidelines are consistent with the safetystandard previously set by both U.S. and international standardsbodies. The design of this phone complies with the FCCguidelines and these international standards. Use only the supplied or an approved antenna. Unauthorizedantennas, modifications, or attachments could impair call quality,damage the phone, or result in violation of FCC regulations.Do not use the phone with a damaged antenna. If a damagedantenna comes into contact with the skin, a minor burn mayresult. Please contact your local dealer for replacement antenna.Body-worn OperationThis device was tested for typical body-worn operations withthe back of the phone kept 0.78inches (2.0cm) from thebody. To maintain compliance with FCC RF exposure guidelinesuse only belt-clips, holster or similar accessories that maintain a 0.78inches (2.0cm) separation between the user’s body and the phone, including the antenna, whether extended or retractedThe use of third-party belt-clips, holsters and similar accessoriesshould not contain metallic components in the assembly. The useof accessories that do not satisfy these requirements may not with FCC RF exposure guidelines, and should be avoided.Vehicle Mounted External Antenna (optional, ifavailable.)A minimum separation distance of 7.9 inches (20cm) must bemaintained Between a person and the vehicle mounted externalantenna to satisfy FCC RF exposure requirements.For more information about RF exposure, please visit the FCCwebsite at www.fcc.govSAR Information & FCC ID LabelingTHIS MODEL PHONE MEETS THE GOVERNMENT’SREQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone is a radio transmitter and receiver. It isdesigned and manufactured not to exceed the emission limits forexposure to radiofrequency (RF) energy set by the FederalCommunications Commission of the U.S. Government. Theselimits are part of comprehensive guidelines and establishpermitted levels of RF energy for the general population. Theguidelines are based on standards that were developed byindependent scientific organizations through periodic andthorough evaluation of scientific studies. The standards include asubstantial safety margin designed to assure the safety of allpersons, regardless of age and health.The exposure standard for wireless mobile phones employs aunit of measurement know as the Specific Absorption Rate, orSAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SARare conducted using standard operating positions specified bythe FCC with the phone transmitting at its highest certifiedpower level in all tested frequency bands. Although the SAR isdetermined at the highest certified power level, the actual SARlevel of the phone while operating can be well below themaximum value. This is because the phone is designed tooperate at multiple power levels so as to use only the powerrequired to reach the network. In general, the closer you are to awireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it mustbe tested and certified to the FCC that it does not exceed thelimit established by the government-adopted requirement forsafe exposure. The tests are performed in positions and locations(e.g., at the ear and worn on the body) as required by the FCC foreach model. The highest SAR value for this model phone whentested for use at the ear is 1.484 W/kg and when worn on thebody, as described in this user guide, is 1.240 W/kg . (Body-wornmeasurements differ among phone models, depending uponavailable accessories and FCC requirements). While there maybe differences between the SAR levels of various phones and atvarious positions, they all meet the government requirement forsafe exposure.
1ContentsUnpacking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Your PhonePhone Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Getting StartedInstalling the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 15Charging a Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . . . 19Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Call FunctionsMaking a Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Making a Call from the Phonebook. . . . . . . . . . . . . . . . 22Redialing the Last Number . . . . . . . . . . . . . . . . . . . . . . 22Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 23Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Viewing Missed Calls. . . . . . . . . . . . . . . . . . . . . . . . . . 25Quick-switching to Silent Mode . . . . . . . . . . . . . . . . . . . . 27Selecting Functions and OptionsUsing the Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Selecting Functions and Options . . . . . . . . . . . . . . . . . . . 29Example: Setting the Display Language . . . . . . . . . . . . 30PhonebookStoring a Phone Number with a Name . . . . . . . . . . . . . 32Speed Dialing by Memory Location . . . . . . . . . . . . . . . 33Phonebook Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Searching for and Dialing a Number in the Phonebook. . . . . . . . . . . . . . . . . 37Name Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38The FCC has granted an Equipment Authorization for this modelphone with all reported SAR levels evaluated as in compliancewith the FCC RF emission guidelines. SAR information on thismodel phone is on file with the FCC and can be found under theDisplay Grant section of http://www.fcc.gov/oet/fccid aftersearching on FCC ID A3LSTHN270.Additional information on Specific Absorption Rates (SAR) canbe found on the Cellular Telecommunications IndustryAssociation (CTIA) web-site at http://www.wow-com.com (seenote).* In the United States and Canada, the SAR limit for mobilephones used by the public is 1.6 watts/kg (W/kg) averaged overone gram of tissue. The standard incorporates a substantialmargin of safety to give additional protection for the public andto account for any variations in measurements.Note: The URL http://phonefacts.net may be used in placeof http://www.wow-com.com for direct access to SARinformation.iii
Entering TextChanging the Text Input Mode . . . . . . . . . . . . . . . . . . . 42Using the T9 Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Using the Upper/Lower-case Character Mode . . . . . . . 44Using the Number Mode. . . . . . . . . . . . . . . . . . . . . . . . . . 45In-Call OptionsMuting/Sending Key Tones. . . . . . . . . . . . . . . . . . . . . . 46Searching for a Number in the Phonebook . . . . . . . . . . 47Using the SMS Service . . . . . . . . . . . . . . . . . . . . . . . . 48Making a Calling card call . . . . . . . . . . . . . . . . . . . . . . . . 48Making the Voice Call Private . . . . . . . . . . . . . . . . . . . . . . 49Putting a Call on Hold. . . . . . . . . . . . . . . . . . . . . . . . . . 49Answering a Second Call. . . . . . . . . . . . . . . . . . . . . . . 50Making a 3-way Conference Call . . . . . . . . . . . . . . . . . 51Using the MenusAccessing a Menu Function by scrolling . . . . . . . . . . . 52Accessing a Menu Function by Using its Shortcut . . . . 53List of Menu Functions. . . . . . . . . . . . . . . . . . . . . . . . . 54Call RecordsMissed Calls (Menu 1.1) . . . . . . . . . . . . . . . . . . . . . . . . 59Incoming Calls (Menu 1.2) . . . . . . . . . . . . . . . . . . . . . . 59Outgoing Calls (Menu 1.3). . . . . . . . . . . . . . . . . . . . . . . 60Call Time (Menu 1.4). . . . . . . . . . . . . . . . . . . . . . . . . . . 60MessagesVoice Mail (Menu 2.1). . . . . . . . . . . . . . . . . . . . . . . . . . 61Read Messages (Menu 2.2) . . . . . . . . . . . . . . . . . . . . . 62Write Messages (Menu 2.3) . . . . . . . . . . . . . . . . . . . . . 64Preset Message List (Menu 2.4) . . . . . . . . . . . . . . . . . . 65Setup (Menu 2.5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Picture Message (Menu 2.6). . . . . . . . . . . . . . . . . . . . . 67Receiving Pictures, Ring Tones or Operator Logos . . . . 6932Sound SettingsRing Volume (Menu 3.1) . . . . . . . . . . . . . . . . . . . . . . . . 72Ring Tone (Menu 3.2) . . . . . . . . . . . . . . . . . . . . . . . . . . 72Alert Type (Menu 3.3) . . . . . . . . . . . . . . . . . . . . . . . . . . 73Tone Length (Menu 3.4) . . . . . . . . . . . . . . . . . . . . . . . . 73Message Tone (Menu 3.5) . . . . . . . . . . . . . . . . . . . . . . 74Error Tone (Menu 3.6). . . . . . . . . . . . . . . . . . . . . . . . . . 74Minute Minder (Menu 3.7) . . . . . . . . . . . . . . . . . . . . . . 75Connect Tone (Menu 3.8) . . . . . . . . . . . . . . . . . . . . . . . 75Melody Composer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Phone SettingsGreeting Message (Menu 4.1). . . . . . . . . . . . . . . . . . . . 78LCD Control (Menu 4.2). . . . . . . . . . . . . . . . . . . . . . . . . 78Service Light (Menu 4.3). . . . . . . . . . . . . . . . . . . . . . . . 79Auto Redial (Menu 4.4). . . . . . . . . . . . . . . . . . . . . . . . . 80Answer Mode (Menu 4.5). . . . . . . . . . . . . . . . . . . . . . . 80Language (Menu 4.6) . . . . . . . . . . . . . . . . . . . . . . . . . . 81Reset Settings (Menu 4.7). . . . . . . . . . . . . . . . . . . . . . . 81Calling card (Menu 4.8) . . . . . . . . . . . . . . . . . . . . . . . . 81Shortcut (Menu 4.9) . . . . . . . . . . . . . . . . . . . . . . . . . . . 84OrganizerCalendar (Menu 5.1). . . . . . . . . . . . . . . . . . . . . . . . . . . 85To Do List (Menu 5.2) . . . . . . . . . . . . . . . . . . . . . . . . . . 87Time & Date (Menu 5.3) . . . . . . . . . . . . . . . . . . . . . . . . 89Alarm (Menu 5.4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Calculator (Menu 5.5) . . . . . . . . . . . . . . . . . . . . . . . . . . 92SecurityChange Lock code (Menu 6.1) . . . . . . . . . . . . . . . . . . . 93Change Security code (Menu 6.2). . . . . . . . . . . . . . . . . 93Call Restriction (Menu 6.3) . . . . . . . . . . . . . . . . . . . . . . 94SOS Call List (Menu 6.4) . . . . . . . . . . . . . . . . . . . . . . . . 95
54Quick Safety GuideRead these simple guidelines. Failure to comply withthem may be dangerous or illegal. For more detailedsafety information, see “Health and SafetyInformation” on page xx.Road safety comes firstDo not use a hand-held mobile phone while driving;park the vehicle first. Switch off when refuellingDo not use the phone at a refuelling point (servicestation) or near fuels or chemicals.Switch off on aircraftMobile phones can cause interference. Using themon aircraft is both illegal and dangerous.Switch off in hospitalFollow any regulations or rules. Switch phone offnear medical equipment.Respect special regulationsFollow any special regulations in force in any areaand always switch off your phone whenever it isforbidden to use it, or when it may causeinterference or danger (in a hospital for example).InterferenceAll wireless phones may be subject to radiointerference, which may affect their performance.Network ServicesCall Diverting (Menu 7.1) . . . . . . . . . . . . . . . . . . . . . . . 96Call Waiting (Menu 7.2) . . . . . . . . . . . . . . . . . . . . . . . . 97Network Selection (Menu 7.3) . . . . . . . . . . . . . . . . . . . 98Voice Privacy (Menu 7.4) . . . . . . . . . . . . . . . . . . . . . . . 99NAM Selection(Menu 7.5) . . . . . . . . . . . . . . . . . . . . . . 99Set Service Code(Menu 7.6) . . . . . . . . . . . . . . . . . . . . 100Publick System Selection (Menu 7.7) . . . . . . . . . . . . . 101Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102WAP Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104Voice MemoRecord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105Replay & Delete. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Edit Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 109Health and Safety Information . . . . . . . . . . . . . . . 111Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Quick Reference Card . . . . . . . . . . . . . . . . . . . . . . 133FDA Consumer Update. . . . . . . . . . . . . . . . . . . . . . 135available when you set the service code in the Set Service Codemenu option (7.6).***
In addition, you can obtain the following accessories foryour phone from your local SAMSUNG dealer:• Desktop charger • Hands-free kit• Standard/Extended battery• Cigarette lighter adapter• Ear-microphone• Leather case76Travel ChargerHandsetUser’s Manual Radio frequency exposure informationIn August 1996, the Federal CommunicationsCommission (FCC) of the U.S. adopted an updatedsafety standard for human exposure to radiofrequency electromagnetic energy emitted by FCCregulated transmitters. The design of this phonecomplies with the FCC guidelines and theseinternational standards.To maintain compliance with FCC RF exposureguidelines, if you wear a handset on your body, usethe SAMSUNG-supplied or approved carrying case,holster, or other body-worn accessory.If you do not use a body-worn accessory, ensure theantenna is at least 0.78 inch (2.0 cm) from your bodywhen transmitting. Use of non-approved accessoriesmay violate FCC RF exposure guidelines.Use sensiblyUse only in the normal position (to ear). Do not touchthe antenna unnecessarily when the phone isswitched on.Accessories and batteriesUse only SAMSUNG-approved accessories andbatteries. Use qualified serviceOnly qualified service personnel must repairequipment. UnpackingYour package contains the following items.Battery Hand StrapEar-microphone
Key DescriptionPerform the functions indicated by the textabove them (in the bottom line of thedisplay).In the menu facility, scrolls through themenu options and phonebook memory.When pressed in idle mode, the keylaunches the WAP browser. The keyenters your favorite menu options directly(for more information on shortcuts, seepage xx). In the menu facility, return to the previousmenu level and select the current menu respectively.When pressed in idle mode, the keyenters to the Voice Memo menu. Thekey enters your favorite menu optionsdirectly (for more information on shortcuts,see page xx).When entering a name, move the cursorleft and right respectively. 98YYoouurr PPhhoonneeEarpieceSoft key (left) Navigation keyDisplaySoft key (right)Cancel/ correction keyPower on/off keyAlphanumerickeysSpecial functionkeysDial/menu confirmation key MicrophoneYour PhonePhone LayoutThe following illustrations show the main elementsof your phone.AntennaExternal LCDEar-microphonejockVolume keys(soft keys)Service lightClosed viewOpen view
DisplayDisplay LayoutThe display comprises three areas.Area DescriptionFirst line Displays various icons (see page xx).Middle lines Display messages, instructions and any information that you enter(number to be dialed, for example).Last line Shows the functions currentlyassigned to the two soft keys.1110YYoouurr PPhhoonneeYYoouurr PPhhoonneeKey Description (continued...)Deletes characters from the display.In the menu facility, returns to theprevious menu level.When held down for more than twoseconds in idle mode, quickly enters orexits silent mode. Makes or answers a call.In idle mode, recalls the last numberdialed.Ends a call. Also switches the phone onand off when pressed and held. In the menu facility, returns to idle modeand cancels your input.When held down in idle mode, allows youto access your voice mail box.Enter numbers, letters and some special characters.Enter special dial characters. Also usethese keys for various purposes indifferent functions.(on the side of the phone) During a call, adjust the earpiece volume.In idle mode with the folder open, adjustthe key volume.In the menu facility, scroll through themenu options and phonebook memory.~IconsText andgraphic areaSoft keyindicationsMMeennuu NNaammeess
1312YYoouurr PPhhoonneeYYoouurr PPhhoonneeIconsIcon DescriptionShows the received signal strength. Thegreater the number of bars, the better thesignal strength.Appears when a call is in progress.Appears when a new text message hasbeen received.Appears when the silent mode is activeand when the Alert Type menu option (3.3)is set to Vibration.Appears when you set the alarm.Shows the level of your battery. The morebars you see, the more power you haveleft.Appears when you are out of your homearea and have registered onto a differentnetwork (when travelling in other countries,for example).Appears when a new voice mail messagehas been received.Appears when you activate the Mute mode.BacklightThe display is illuminated by a backlight. When youpress any key, the backlight illuminates. It turns off ifno key is pressed within a given period of time,depending on the Back Light option set in thePhone Settings menu. To specify the length of time for which the backlightis active, set the Back Light menu option (4.2.1);see page xx for further details.External DisplayYour phone has an external display on the cover. Itindicates that you have an incoming call or amessage, and notifies you at the specified timewhen you have set an alarm. When you press and hold down the volume keys onthe left side of the phone with the folder closed, thebacklight of the external display illuminates.
1514YYoouurr PPhhoonneeService LightThe service light is in the top right-hand corner of thephone. It flashes to indicate phone status: It flashesto indicate phone status: When the phone is readyfor use, it flashes in green. When a call or messagecomes in, and you are recording a voice memo, itflashes in red.To activate or deactivate use of the service light, setthe Service Light menu option (4.3); see page xx forfurther details.Service lightGetting StartedInstalling the BatteryTo Install the Battery1. Insert the contact end on the bottom of the batteryinto the slots on the bottom of the phone. 2. Press the battery down until it clicks into place.
16 17GGeettttiinngg SSttaarrtteeddGGeettttiinngg SSttaarrtteedd13To Remove the Battery1. If necessary, switch off the phone by holdingdown the key until the power off imagebegins to play.2. Remove the battery. To do so:➀Push the catch toward the top of the phoneand hold it in position, then➁lift out the battery from the phone. Thebattery will easily lift out. ➁➀Charging a BatteryYour phone is powered by a rechargeable Li-Ionbattery. A travel charger is provided with your phone.Use only approved batteries and chargers. Ask yourlocal SAMSUNG dealer for further details.The phone can be used while the battery is charging.Note: You must fully charge the battery before usingyour phone for the first time. A dischargedbattery is fully recharged in approximately200 minutes.1. With the battery in position on the phone, connectthe lead from the travel charger to the jack on thebottom of the phone.2. Connect the charger to a standard AC wall outlet.Use this groove whenlifting the battery out.
18 19GGeettttiinngg SSttaarrtteeddGGeettttiinngg SSttaarrtteedd3. When charging is finished (the lamp on the chargeturns green), disconnect the charger from thepower outlet and remove it from the phone bysqueezing the two tabs on the lead (➀) and unplugthe lead(➁).Low Battery IndicatorWhen the battery is weak and only a few minutes oftalk time remain, you will hear a warning tone andthe following message will be repeated at regularintervals on the display, along with the empty batteryicon:When the battery becomes too weak for the phoneto operate, it switches off automatically.**Warning**Low BatteryMenu Names➀➀➁Switching the Phone On/Off1. Open the folder.2. Hold down the key for more than onesecond to switch the phone on.3. The phone searches for your service system andwhen it finds the system, the idle screen,illustrated below, is displayed. The externaldisplay shows the signal strength, batterystrength and current time and date. Note: The display language is preset to English atfactory. To change the language, use theLanguage menu option (4.6); for furtherdetails, refer to page xx.4. When you wish to switch the phone off, holddown the key for more than two seconds.Service Provider12:57PSat 14 MarMenu Names12:57PSat/14<Main display> <External display>
20 21GGeettttiinngg SSttaarrtteeddLocking Your PhoneYou can lock your phone to protect the phone againstunauthorized use. When the phone is locked, youcannot operate the phone until you enter the lockcode.To lock your phone:Press and hold down the key for more than twoseconds in idle mode. “Phone Locked” appears onthe idle screen.To unlock the phone:Press the Unlock soft key, enter the lock code, andthen press the OK soft key. Your phone’s lock code ispreset at the factory to “0000.” For further details onthe lock code, see page xx.Even when the phone is locked, you can place anSOS call to one of the emergency numbers stored inthe SOS Call List (6.4). See page xx for furtherdetails.To place an SOS call, press the SOS soft key, selectthe desired emergency number by pressing the or key and press the Yes soft key.Service Provider12:57PPhone LockedUnlock SOSCall FunctionsMaking a CallWhen the idle screen is displayed, key in the areacode and phone number and press the key.Note:If you have set the Auto Redial menu option (4.4)to ON (see page xx) and the person called doesnot answer or is already on the phone, thenumber is redialed automatically up to ten times.If the network answers the call (by voice mailgreeting, for example), the phone will notattempt to redial.Correcting the NumberTo clear... Then press...The last digit The Ckey.displayedAny other digit Press the or key until the in the number cursor is immediately to theright of the digit to be cleared.Press the Ckey. You can alsoinsert a missing digit simply bypressing the appropriate key. The whole display Hold down the Ckey for morethan two seconds.Ending a CallWhen you want to finish your call, briefly press andrelease the key or close the folder.
22CCaallll FFuunnccttiioonnss23CCaallll FFuunnccttiioonnssMaking a Call from the PhonebookYou can store the names and phone numbers dialedregularly in the phone memory, called Phonebook.You then simply select the required name to recallthe associated number. For further details on thePhonebook feature, refer to page xx.Redialing the Last NumberThe phone stores the last 10 numbers dialed. Torecall any of these numbers, proceed as follows.1. If you have typed any characters on the display,press the key to return to idle mode.2. Press the key to display the last dialed number.3. Press the or key to scroll through thenumbers until the required number is displayed.4. To... Then...Dial the number Press the key.displayedEdit the number • Press the Edit soft key.displayed •Change the number asrequired, referring to“Correcting the Number”for details (see page xx).• Press the Save soft key tosave the number or the key to dial the number.Adjusting the VolumeDuring a call, if you want to adjust the earpiecevolume, use the volume keys on the left side of thephone. Press the key to increase and the key todecrease the volume. The more bars you see, thelouder the sound is.In idle mode with the folder open, you can adjust thekey volume using the and keys.
25CCaallll FFuunnccttiioonnss24CCaallll FFuunnccttiioonnssAnswering a CallWhen somebody calls you, the phone rings and thephone icon in the middle of the screen flashes.nnnnn(( ))If the caller can be identified, the caller’s phonenumber (or name if stored in your phonebook) isdisplayed. If the caller cannot be identified, only thephone icon flashes. 1. Open the folder. If it is already open, press thekey.If the Answer Mode menu option (4.5) is set toAnykey Answer, you can press any key exceptthe key. With the menu set to Send Key Answer, youmust press the key or the Accept soft key toanswer the incoming call (For details on theAnswer Mode menu, see page xx).2. End the call by closing the folder or pressing thekey.Note: You can answer a call while using thePhonebook or menu features. The currentoperation will be interrupted.Viewing Missed CallsIf you are unable to answer a call for any reason, youcan find out who was calling you, provided that theCaller Line Identification service is available. In thisway, you can call the person back, if necessary. Thenumber of missed calls is displayed on the idlescreen immediately after the call was missed.To view the missed call immediately, take thefollowing steps:1. If the folder is closed, open it.2. Press the View soft key.The number corresponding to the most recentmissed call is displayed, if available.3. To... Then...Scroll through the Press or missed calls key.Call the number displayed Press the key.Edit or delete a missed Press the Optionscall number soft key (see nextpage).nnnnn(( ))AcceptCannot check withthe current phone.
26 27CCaallll FFuunnccttiioonnssCCaallll FFuunnccttiioonnssEditing a Missed Call NumberNote: If the caller’s number associated with themissed call is not available, the Edit option isnot displayed.1. Press the Options soft key.2. If necessary, press the or key to highlightthe Edit option.3. Press the Select soft key.4. Change the number as required. 5. To... Then press the...Call the number key.Store the number Save soft key and enterthe name and locationrequired (for furtherdetails, refer to page xx).Deleting a Missed Call1. Press the Options soft key.2. If necessary, press or key to highlight theDelete option.3. Press the Select soft key.You can press the key at any time to exit theMissed Call feature.Note: You can access the Missed Call feature atany time by selecting the Missed Calls menuoption (1.1); for further details, see page xx.Quick-switching to Silent ModeYou can quickly switch your phone to silent modewith a touch of a key to mute the phone’s sound. Press and hold the Ckey until the icon and“Silent Mode” appears in display. Your phone goesto silent mode immediately. In silent mode, your phone switches the soundsettings as follows:alert type (3.3) Vbrationmessage tone (3.5) Light Onlyerror tone (3.6) offkeypad tone offTo exit silent mode, press and hold the Ckey againuntil “Exit Silent Mode” appears.This feature is convenient when you are in a hurry tomute the phone sound, such as when in a theater.
29Selecting Functionsand OptionsUsing the Soft keysYour phone offers a set of functions that allow you to customize your phone. These functions arearranged in menus and sub-menus, accessed via thetwo soft keys marked . Each menu and sub-menuallows you to view and alter the settings of aparticular function.The roles of the soft keys vary according to thecurrent context; the label on the bottom line of thedisplay just above each key indicates its current role.Example:Press the left softkey to save thename entered.Press the right soft keyto change the text inputmode.28Enter NameOK ASSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnssSelecting Functions and OptionsTo view the various functions/options available andselect the one required, proceed as follows.1. Press the appropriate soft key.2. To... Then press the...Select the: Select soft key or • Function displayed key.or• Option highlightedView the next function key or key on or highlight the next the left side of the option in a list phone.Move back to the key or key on function or the left side of the option in a list phone.Move back up one key, soft key or level in the structure C key.Exit the structure key.without changing the settingsIn some functions, you may be asked for a lock codeor security code. Enter the required code and pressthe OK soft key.Note: When you access a list of options, your phonehighlights the current option. If, however, thereare only two options, such as On/Off orEnable/Disable, your phone highlights theoption that is not currently active, so that youcan select it directly.
30 31SSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnssSSeelleeccttiinngg FFuunnccttiioonnss aanndd OOppttiioonnssMessagesSoundSettingsPhoneSettingsSelect 4Example: Setting the Display Language1. When the idle screen is displayed, press theMenu soft key to enter the menu facility.Service Provider10:30PFri 15 MayMenu Names2. Scroll through the menus until you reach thePhone Settings menu, by pressing the orkey.3. To select the Phone Settings menu, press theSelect soft key or the key.4. Scroll through the sub-menus until you reach theLanguage sub-menu, by pressing the or key.5. To view the languages available, press theSelect soft key or the key. The current settingis highlighted.6. Scroll through the list of languages until theappropriate one is highlighted, by pressing theor key.7. Press the Select soft key or the key to confirmyour selection.8. Press the Cor key twice to exit the menustructure.CurrentlanguagePhone Settings1 Greeting Mess...2 Lcd Control3 Service Light4 Auto Redial5 Answer ModeSelect 4. 1Phone Settings2 Lcd Control3 Service Light4 Auto Redial5 Answer Mode6 LanguageSelect 4. 6Language1 English2 Español3 PortuguêsSelect 4.6.1EnglishCurrentlanguage
32 33PhonebookThe Phonebook allows you to store frequently usedphone numbers and the associated names in yourphone to make it easy for you to make a call withouthaving to remember or enter the phone number. Youcan store up to 250 (1 ~ 250) entries. Storing a Phone Number with a NameAs soon as you start to enter a number, Save appearsabove the left soft key to allow you to store thenumber in Phonebook.1. Key in the number to be stored.Note: If you make a mistake while entering anumber, correct it using the Ckey. Forfurther details, refer to page xx.2. When you are sure that it is correct, press theSave soft key.3. Select a label by pressing the or key, andpress the Select soft key. The available labels are: Home, Office, Mobile,Pager, Fax, and No label.4. Enter the corresponding name. For information onhow to enter a name, see page xx.5. When you are satisfied, press the OK soft key.The phone now prompts you to select a location inthe phone memory for you to save the entry. 6. If necessary, enter your preferred location bypressing the number keys.7. Press the OK soft key. The entry is saved and thedisplay shows the name and number you justhave saved.8. Press the key to return to the idle screen.To make a call to the displayed number, press theCall soft key. To access the Phonebook options, press theOptions soft key. See page xx.Speed Dialing by Memory LocationOnce you have stored phone numbers in the phonebook memory, you can dial them easily whenever youwant. To speed dial the desired number:For the 1-digit memory location number (1 through 9),press and hold down the appropriate digit. For the 2 or more-digit memory location number (10through 250), press first digit(s) briefly and holddown the last digit.PPhhoonneebbooookk
34 35PPhhoonneebbooookkPPhhoonneebbooookkNote: If you enter the location number and press thekey, your phone displays the details on theentry, such as name, number, location numberand label. If you have stored more than onenumber for a name, scroll through the entry bypressing the or key repeatedly.Phonebook OptionsWhen viewing a number in Phonebook, Optionsappears above the right soft key to allow you toaccess the Phonebook options.Accessing the OptionsTo access the various Phonebook options, take thefollowing steps:1. While viewing a Phonebook entry, press theOptions soft key. The first available option ishighlighted.2. To... Then...Select the Press the Select soft key. highlighted optionHighlight a Press the or key different option until the required option ishighlighted.Add NumberThis option allows you to store up to seven numbersper entry by assigning them to different categories.Note that you cannot duplicate same categories forone entry. For example, you can only have onenumber labeled “Mobile” for the selected entry. Change NameThis option allows you to change the name for thenumber. Clear the old name pressing the Ckey andenter a new name. For information on entering aname, see page xx.Change NumberThis option allows you to change the number. Clearthe old number by pressing the C key and enter anew number.Change TypeThis option allows you to change the label type of astored number. Note that you cannot duplicate samecategories for one entry. For example, you can onlyhave one number labeled “Mobile” for the selectedentry.Caller GroupThis option allows you to set the number as amember of the caller group. Select the desired callergroup from the list. For more details on the CallerGroup feature, see page xx.
36 37PPhhoonneebbooookkPPhhoonneebbooookkErase NumberThis option allows you to erase a stored number. Ifyou saved two numbers under a name, only thecurrently selected number will be erased. You areasked to confirm that you wish to erase the numberby pressing the Yes soft key.Erase NameThis option allows you to erase a name stored in thePhonebook so that all numbers under the name areerased. You are asked to confirm that you wish toerase the name by pressing the Yes soft key.MoveThis option allows you to move a Phonebook entry toanother location. When prompted, enter the locationnumber which you are moving the number to, andpress the OK soft key.Set Priority NO.This option allows you to set the selected number asa speed dial number for the entry if it has more thanone number. Press the Set soft key .Searching for and Dialing a Number inthe Phonebook1. When the idle screen is displayed, press theNames soft key. You are asked to enter a name.2. Enter the starting characters of the name that youwant to find and press the Search soft key.Note: You can also scroll through all Phonebookentries by pressing the Search soft keydirectly.The Phonebook entries are listed, starting withthe first entry matching your input. 3. To... Then...View the Press the View soft key.highlighted entrySelect a Slide the or keydifferent entry until the required entry ishighlighted.Look for a name Press the key labeled withstarting with a the required letter.different letter4. Once you have found the required entry, press thekey or the Call soft key to dial the number.
Name OptionsWhile entering a name for searching, you can seeOptions above the right soft key. This key allows youto enter the various options. Accessing the OptionsTo access the various Phonebook options, take thefollowing steps:1. In idle mode, press the Names soft key.2. Press the Options soft key. The first availableoption is highlighted.3. To... Then...Select the Press the Select soft key. highlighted optionHighlight a Press the or keydifferent option until the required option ishighlighted.New EntryThis option allows you to create a new entry in thePhonebook. For details on storing a phone number,see page xx.Caller GroupYou can set the phone to ring in a specific way anddisplay a preselected graphic icon when a particularperson calls you. To do so, you must:• Define your caller groups• Assign the numbers in the Phonebook to theappropriate group38 39PPhhoonneebbooookkPPhhoonneebbooookkDefining a caller groupSelect the group to be defined and set theappropriate options. The following options areavailable.Call ring tone: allows you to select the ring tone tobe used when you receive a voice phone call from aperson in the group.SMS tone: allows you to select the ring tone to beused when you receive a text message from a personin the group.Graphic: allows you to select the graphic icon to bedisplayed when you receive a call from a person inthe group.Group Name: allows you to assign a name to thegroup; for further details on how to enter characters,refer to page xx.Assigning numbers to a group1. View the required number in Phonebook.2. Press the Options soft key.3. Select the Caller Group option.4. Select the required group.To remove a number from a group, select the NoGroup option.
41Own NumberThis function is a memory aid, which you can use tocheck your own phone number if you need to do so.Memory StatusYou can check the used memory and free memoryyou have for Phonebook . The display shows howmany entries are currently stored and can be savedin future in Phonebook. Erase AllThis option allows you to erase all of the Phonebookentries.When a confirmation appears, press the Yes soft keyto erase all Phonebook entries. To cancel erasing theentries, press the Cancel soft key.When prompted, enter the lock code. All entries inthe Phonebook are then erased.40PPhhoonneebbooookkEntering TextWhen using your phone, you will often need to entertext. For example, when storing a name in thephonebook, creating your personal greeting orscheduling events in your calendar. You can enteralphanumeric characters by using your phone’skeypad.You are provided with the following text inputmodes.•T9 modeThis mode allows you to enter words with onlyone keystroke per letter. Each key on the keypadhas more than one letter - when you press thekey once, J, K or L may be displayed. The T9mode automatically compares your keystrokeswith an internal linguistic dictionary to determinethe correct word, thus requiring far fewerkeystrokes than the traditional upper/lower-casecharacter modes.•Upper/lower-case character modesThese modes allow you to enter letters bypressing the key labeled with the required letteronce, twice or three times until the letter isdisplayed.•Number modeThis mode allows you to enter numbers.
42 43CCaallll FFuunnccttiioonnssEEnntteerriinngg TTeexxttEEnntteerriinngg TTeexxttChanging the Text Input ModeWhen you are in a field that allows characters to beentered, you will notice the text input mode indicatorin the display.Text input modeindicatorEnter NameIOK To select... Then press the soft key until...Upper-case characters is displayed. See page xx.Lower-case characters is displayed. See page xx.Numbers only is displayed. See page xx.The T9 mode is displayed. See below.1aAUsing the T9 ModeThe T9 predictive text input mode allows you to keyin any character using single keystrokes. This textinput mode is based on a built-in dictionary.1. When you are in the T9 predictive text input mode,start entering a word by pressing keys to. Press each key only once for oneletter. Example: to enter HELLO in the T9 mode, press, , , and .The word that you are typing appears in the display.It may change with each key that you press.2. Enter the whole word before editing or deletingand keystrokes.3. If the word is correct, start entering the next word. Otherwise, press , or repeatedly todisplay alternate word choices for the keys thatyou have pressed. Example: OF and ME both share the sequence, . The phone displays themost commonly used choice first.4. Complete each word with a space by pressing thekey.• To type words not found in the T9 mode, changethe text input mode to the upper/lower-casecharacter input mode. T9 mode is not availablein the current phone.
45CCaallll FFuunnccttiioonnssEEnntteerriinngg TTeexxtt44EEnntteerriinngg TTeexxtt• To enter full stops, hyphens or apostrophes, press. The T9 mode applies grammar rules toensure that the correct punctuation is used. Example: is used twice to display twopunctuation marks: • To change the case in the T9 mode, use the key.• You can move the cursor by using the andkeys. To delete letters, press the C key. Press andhold down the Ckey to clear the display.Using the Upper/Lower-case CharacterModeUse the to keys to enter your text. 1. Press the key labeled with the required letter:• Once for the first letter• Twice for the second letter• And so on2. Select the other letters in the same way.Note:The cursor moves to the right when you press adifferent key. When entering the same lettertwice (or a different letter on the same key),just wait for a few seconds for the cursor tomove right automatically, and then select thenext letter.L E T ‘ S E A T . Refer to the table below for more information on thecharacters available using the keys.• To insert a space, press the key.• You can move the cursor by using the and keys. To delete letters, press the Ckey. Press andhold down the Ckey to clear the display.Using the Number ModeThe Number mode enables you to enter numbers in atext message (a telephone number for example).Press the keys corresponding to the required digitsbefore manually switching back to the appropriatetext input mode.Key Characters in the Order DisplayedUpper Case Lower Case1234567890*Space 1ABC2DEF3GHI 4JKL5MNO 6PQRS7TUV8WX Y Z 90*/+-=<>()%& Φ Θ Ψ Π Σ ΞSpace 1abc2def3ghi 4jkl5mn o 6pqrs7†uv8w x y z 90#.,:;!?@‘“¿§£$¥¤ßΩ
4746IInn--CCaallll OOppttiioonnssSearching for a Number in thePhonebookYou can search for a number in the Phonebook duringa call.1. During a call, press the Options soft key.2. Press the or key to select thePhonebook option.3. Press the OK soft key.The Phonebook entries are listed.4. Enter the name that you wish to find.If you enter the start of the name, the Phonebookentries are listed, starting with the first entrymatching your input. The entry is also highlighted.5. To view the highlighted entry, press the View softkey.For more detailed description of the Phonebookfeature, refer to page xx.In-Call OptionsYour phone provides a number of control functionsthat you can use during a call. Muting/Sending Key TonesYou can turn the key tones which were generatedeach time you press a key off or on. To turn the key tone off, take the following steps:1. During a call, press the Options soft key.2. Press the or key to select the MuteKeys option. Now, the option is replaced withSend Keys.3. Press the OK soft key. Your phone does not transmit the key tones. Itallows you to press keys without hearingannoying key tones during a call.To turn the key tone on, take the following steps:1. During a call, press the Options soft key.2. Press the or key to select the Send Keysoption. Now, the option is replaced with MuteKeys.3. Press the OK soft key.Note: To communicate with answering machines orcomputerized telephony systems, the SendKeys option must be selected.
48PPhhoonneeBBooookk49IInn--CCaallll OOppttiioonnssUsing the SMS ServiceYou can create and send a SMS message during acall.1. During a call, press the Options soft key.2. Press the or key to select the SMSService option.3. Press the OK soft key.4. Write text for the message, and press the OK softkey.5. Enter the desired phone number, and press the OKsoft key to send the message.For further details on the SMS service, refer topage xx.Making a Calling Card CallWhen you make a call using the prepaid calling card,if you save the calling card information in the CallingCard menu option (4.9), you can send automaticallythe code number required for the service withoutentering them manually each time you are prompted.For further details on making a calling card call, referto page xx.Making the Voice Call PrivateYou can make the current call private so that nobodyeavesdrops your call.1. During a call, press the Options soft key.2. Press the or key to select the VoicePrivacy option.3. Press the Select soft key.4. Press the or key to select Activate orDeactivate. Select Activate to secure your call or Deactivatenot to do.5. Press the Select soft key.Putting a Call on HoldYou can make another call while you have a call inprogress if this service is supported by the network.Of two calls, one is active and the other is on holdand you can swap between the calls.Note: The procedure to put a call on hold may varydepending on your network. For further details,contact your service provider.
To make a call while you have a call in progress, takethe following steps:1. During a call, key in the phone number that youwish to dial or look it up in Phonebook.2. Press the key to dial the second call. The firstcall is automatically put on hold.3. To swap between the two calls, simply press thekey.4. To end the current call, press the key.Answering a Second CallYou can answer an incoming call while you have acall in progress, if this service is supported by thenetwork and you have set the Call Waiting menuoption (7.2) to Activate (see page xx). You will benotified of an incoming call by a call waiting tone.To answer a call while you have a call in progress,take the following steps:1. When you hear a call waiting tone, press the key to answer the incoming call. The first call is automatically put on hold.2. To switch between the two calls, press the key.3. To end the current call, press the key.50 51IInn--CCaallll OOppttiioonnssIInn--CCaallll OOppttiioonnssMaking a 3-way Conference CallYou can conduct conference calls with two separateparties at the same time. A conference call is anetwork service. For more information, contact yourservice provider.Note: The procedure may vary depending on yournetwork. Contact the service provider fordetails. 1. Call the first participant in the normal way.2. Call the second participant in the normal way.The first call is automatically put on hold.3. When the second person answer, press the key to merge the calls.4. End the conference call by closing the flip coveror pressing the key.During a conference call, if one of the callers hangsup, you and the remaining caller will stay connected.If you initiated the call and you hang up first, allthree parties are disconnected.
Accessing a Menu Function by Using itsShortcutThe menu items (menu, submenus and settingoptions) are numbered and can be accessed quicklyby using their shortcut number. The shortcut numberis shown in the bottom right next to the soft keyon the display.1. In idle mode, press the Menu soft key.2. Within three seconds, key in the first digit of theshortcut number. Repeat this for each digit of theshortcut number.Example: Setting the Backlight option to ShortPress the Menu soft key, and key in 4, 2, 1, 2.Menu for entering the menu, 4for PhoneSettings, 2for LCD Control, 1for Backlight, 2for Short .Note: The numbers assigned to each menu functionare indicated on the list on page xx. 5352Using the MenusThe phone offers a range of functions that allowsyou to customize the phone to your needs. Thesefunctions are arranged in menus and submenus.The menus and submenus can be accessed byscrolling or by using the shortcuts.Accessing a Menu Function by Scrolling1. In idle mode, press the Menu soft key to accessthe menu facility. Press the or key toreach the desired main menu, e.g., PhoneSettings. Press the Select soft key or the keyto enter the menu.2. If the menu contains any submenus, for example,Language, find the one you want by pressingthe or key. Press the Select soft key toenter the submenu.If the menu you selected has submenus, repeatthis step.3. Press the or key to find the setting ofyour choice. Press the Select soft key or thekey to confirm the chosen setting.Notes:• You can return the previous menu level by pressingthe Ckey or the key.• You can exit the menu without changing the menusettings by pressing the key.UUssiinngg tthhee MMeennuussBacklight1 Off2 Short3 LongSelect 4.2.1.1Shortcut number
List of Menu FunctionsThe following illustration shows the menu structureavailable and indicates the:• Number assigned to each option• Page on which you can find a description of eachfeature54 55UUssiinngg tthhee MMeennuussUUssiinngg tthhee MMeennuuss1.1 Missed Calls1.2 Incoming Calls1.3 Outgoing Calls1.4 Call Time1.4.1 Last Call Time1.4.2 Total Call Time1.4.3 Display Call Time 1.4.4 Reset Timers1. Call Records Page xx2. Messages2.1 Voice Mail2.1.1 Connect to Voice Server2.1.2 Voice Server Number2.2 Read Messages2.2.1 New Inbox2.2.2 Old Inbox2.2.3 Outbox2.2.4 Delete All2.3 Write Messages2.4 Preset Message List2.5 SetupPage xx3. Sound Settings3.1 Ring Volume3.2 Ring Tone3.3 Alert Type3.4 Tone Length3.5 Message Tone3.6 Error Tone3.7 Minute Minder3.8 Connect Tone3.9 Melody Composer4. Phone Settings 4.1 Greeting Message4.2 LCD Control4.2.1 Back Light4.2.2 Contrast4.3 Service Light 4.4 Auto Redial 4.5 Answer Mode 4.6 Language4.7 Reset Settings4.8 Calling Card4.9 ShortcutPage xxPage xx
56 57PPhhoonneeBBooookkUUssiinngg tthhee MMeennuussUUssiinngg tthhee MMeennuuss6. Security 6.1 Change Lock Code6.2 Change Security Code6.3 Call Restriction6.3.1 restrict all outgoing call6.3.2 restrict all incoming call6.3.3 restrict outgoing call6.4 SOS Call ListPage xx5. Organizer 5.1 Calendar5.2 To Do List5.3 Time & Date5.3.1 Set Time5.3.2 Set Date5.3.3 World Time5.3.4 Format5.4 Alarm5.4.1 Once Alarm5.4.2 Daily Alarm5.4.3 Weekly Alarm5.4.4 Remove Alarm5.5 CalculatorPage xx7. Network Services 7.1 Call Diverting7.1.1 Divert Always7.1.2 Busy7.2 Call Waiting 7.3 Network Selection7.3.1 Automatic7.3.2 Manual7.3.3 New Search7.4 Voice Privacy7.5 NAM Selection7.6 Set Service Code7.6.1 Call Diverting7.6.2 Call Waiting7.7 Public System Selection8. Games8.1 Casino8.2 Roulette8.3 Black Jack8.4 Sniper8.5 Snake8.6 Mole8.7 OthelloPage xxPage xx*2*1*1*1 available when you set the service code in the SetService Code menu option (7.6).*2 may be unavailable depanding on the service provider.
58 59UUssiinngg tthhee MMeennuussCall RecordsVia this menu, you can view the following phonecalls:• Missed• Incoming• OutgoingThe number and name (if available) are displayed,together with the date and time at which the call wasmade.Note: Your phone can keep up to ten numbers ineach record.Missed Calls Menu 1.1This option lets you view the last unanswered calls.Pressing the Options soft key allows you to:• Edit the number (if available) and dial it or save itin Phonebook• Delete the call from the listIncoming Calls Menu 1.2This option lets you view the last calls received.Pressing the Options soft key allows you to:• Edit the number (if available) and dial it or save itin Phonebook• Delete the call from the list9. WAP Browser9.1 Home9.2 Favorite9.3 http://9.4 Settings9.5 Clear CacheFor details on the WAP browser feature, refer to the WAPBrowser guide supplied with your phone.Page xx
61CCaallll RReeccoorrddss60Outgoing Calls Menu 1.3This option lets you view the last numbers dialed.Pressing the Options soft key allows you to:• Delete the number • Edit the number and save it in PhonebookCall Time Menu 1.4This option lets you view the timers for calls madeand received. The following timers are available.Last Call Time: duration of the last call.Total Call Time: total duration of all calls madefrom or receive to your phone since the timer waslast reset using the Reset Timer option.Display Call Time: allows you to set the phone todisplay the call time when the call is made orreceived. Select Enable to display the call time andDisable not to display it.Reset Timers: option used to reset the call timers;you must first enter the phone’s security code (seepage xx) and then press the OK soft key.Note: The actual time invoiced for calls by yourservice provider may vary, depending onnetwork features, rounding-off for billingpurposes and so forth.MessagesThe SMS (Short Message Service) function is anetwork service and may not be supported by yournetwork. Messages can be sent by text, fax and e-mail messaging systems, provided that these servicesare supported by your network. When you receive new text messages, the iconappears on the top line of the display. If the messagememory is full, an error message is displayed and youcannot receive any new messages. Use the DeleteAll option in the Read Messages menu (2.2) todelete obsolete messages.Voice Mail Menu 2.1This menu provides you with a way of accessing yourvoice mailbox (if provided by your network). Note: Please contact your service provider for moreinformation. Depending on the serviceprovider, you may be charged for accessingthe voice server.Connect to Voice Server: Before using thisfeature, you must enter the voice server numberobtained from your service provider (see menuoption 2.1.2). You can then select this option to listento your voice mails. Note: You can connect to the voice mail server ofthe service provider quickly by pressing andholding down the key in idle mode.
6362Voice Server Number: allows you to change thevoice mail server number.To... Then press the...Enter the server number Corresponding numerickeys.Correct a digit Ckey.Save the entered number Save soft key.Read Messages Menu 2.2Three message boxes are available:New Inbox: used to store the messages that youhave received but not read.Old Inbox: used to store the messages that you havereceived and read.Outbox: used to store the messages that you havealready sent or will send.1. Select the required box. The first message in thebox is displayed with the following information:• Message number• Message status: New, Old, Not Sent, Sent (If you have set the Delivery Ack menu optionto ON, the report is also shown; see page xx forfurther details.)• Date and time at which the message wasreceived (Inboxes only)MMeessssaaggeessMMeessssaaggeess2. Press the or key to select the messageyou want to read.3. To view this message, press the View soft key.The screen shows the:• Sender’s phone number (if the message wassent) or recipient’s phone number• Message textTo scroll through the message, press the or key. You can choose the following options, bypressing the Options soft key.Delete: allows you to delete obsolete messages.Text Reply: allows you to reply by sending a textmessage. Call Back: allows you to call the sender back.Cut Number: allows you to extract a number fromthe message text, so that you can call the number orsave it in Phonebook.Send: allows you to send a message that you havereceived or saved. You can:• Send the message• Save and send the message• Save but not send the messageEdit And Send: allows you to edit a message forsending.Note: The available options may vary, depending onthe message status (New/Old, Not Sent orSent for example).To delete all messages, you can select Delete All(Menu 2.2.4).
65MMeessssaaggeess64MMeessssaaggeessWrite Messages Menu 2.3Via this menu, you can write a text message of up to160 alphanumeric characters and send it to multipledestinations. For further information on how to enterthe characters in your message, see page xx. 1. Press the or key to select a setting groupon which you have set up default information onthe SMS feature via the Setup menu (see thepage xx), and press the Select soft key.2. After completing the message, press the OK softkey.Note: While writing a message, pressing the key allows you to start new line. 3. Select the desired one of the following options bypressing the or key, and press the Selectsoft key. • Send Only: After transmission, the messagewill be cleared.• Save and Send: allows you to save a copy ofthe message. When you read the message inyour outbox, Sent is displayed to indicate themessage status.• Save Only: allows you to save the message sothat it can be sent later. You do not take thenext step. When you read the message in youroutbox, Not sent is displayed.4. Select an Empty cell for the destination (phonenumber or e-mail address) by pressing the orkey and press the Edit soft key.5. Enter the desired destination and press the OKsoft key.Note: The Names soft key visible when you do notenter anything allows you to search for anumber in your Phonebook.6. If you want to send the message to multipledestinations, repeat steps 4 and 5 as needed.To delete an entered destination, select thedesired one, and press the Delete soft key.7. When entering destinations is done, press the key to send the message.Preset Message List Menu 2.4Using this menu, you can preset up to five messagesthat you send most frequently to retrieve whenwriting a new message. Scroll through the list bypressing the or key. When the requiredmessage number appears, press the Options softkey. The following options are available:Edit: allows you to write a new message or edit theselected preset message.Note: For further information on how to enter thecharacters, refer to page xx.
6766MMeessssaaggeessMMeessssaaggeessSend Message: allows you to retrieve the selectedmessage for sending. Once you have completed themessage, you can send, save and send, or simply saveit.Delete: allows you to delete the selected message.Setup Menu 2.5Via this menu, you can set up default information forthe SMS feature. A setting group is a collection ofsettings required to send messages. Five settinggroups are available. Select the desired number by pressing the orkey, and press the key or the Select soft key.Then, set up the options for the group. The available setup options are:Setting Name: allows you to give a name to thesetting group currently being defined.Callback Number: allows you to set the phonenumber to which the recipient of your SMS messagemay send you a reply message via your messagecenter, if the service is provided by the network.Manual Ack: allows you to activate or deactivatethe manual acknowledgement function. When thisfunction is activated, the recipient can send you ananswer to your message by one touch of a numberkey.Delivery Ack: allows you to activate or deactivatethe delivery acknowledgement function. When thisfunction is activated, the network informs youwhether your message has been read or not by therecipient.Privacy: allows you to set the restriction feature.When this option is set to Restricted, the recipientmust have the password which you have set whenwriting a message to see the message. If you do notwant to use the feature, select Not Restricted.Urgency: allows you to set the urgency status of themessages. Bulk, Normal, Urgent, and Very Urgentare available.Type: allows you to set the type of messages. Theavailable types are; Text and E-mail.Picture Message Menu 2.6In this menu, you can send an SMS messagecontaining pictures. Your phone have 10 presetpictures that can be replaced with pictures receivedfrom other sources, such as the internet or remotephones.Select the desired picture from the list and press theView soft key. When the picture is displayed, pressthe Options soft key. The following options areavailable:Delete: deletes the picture from the phone. Thepreset picture will be restored.This menu is not shown in thecurrent phone. The contents arefrom SGH-Q200.
6968Receiving Pictures, Ring Tones, orOperator LogosWhen you receive a message from other phones orfrom the Internet, you will hear an alert beep and atext notification will appear on the display: PictureMessage, Ring Tone or Operator Logo. You have theoption of saving these items in the phone’s memoryor discarding them.Picture MessageYou may send the received picture as and SMSmessage to another phone that supports this feature.You may save up to 10 pictures.When you receive a picture message:To... Then...View the picture Press the View soft key.Save the picture • Press the Options softkey. • Select Save Picture, andpress the Select soft key.• Select a preset picture tobe replaced, and press theSelect soft key.Discard the • Press the Options soft picture key. • Select Discard, and pressthe Select soft key.Use the saved Go to page xx.pictureText Reply*: allows you to send a text reply to thesender of the selected picture.Call Back*: allows you to call the sender back.Cut Number*: allows you to extract a number fromthe message, so that you can call the number or saveit in the phonebook.Send: allows you to send the picture message usingthe selected picture. Note that the recipient's phonemust support the Picture Messaging feature.Edit Text*: allows you to edit text from themessage.Rename: allows you to change the title of thepicture. For details on entering characters, see pagexx.Notes: • Picture messages are stored in the phone memory.You cannot view them if you use your SIM card inanother phone.• Each picture message is made of several textmessages. Therefore, sending one picturemessage may cost more than sending one textmessage.*: unavailable when the selected picture is one of the preset pictures.MMeessssaaggeessMMeessssaaggeessThis feature is not available inthe current phone. The contentsare from SGH-Q200.
7170Operator LogoThe new operator logo will be displayed in place ofthe service provider’s name on the idle screen whenyou are connected to the corresponding network. Youmay save only one Operator Logo. Each time you savea new logo, the old one is deleted.When you receive an operator logo message:To... Then...View the logo Press the View soft key.Save the logo • Press the Options softkey. • Select Save, and pressthe Select soft key.Discard the logo • Press the Options softkey. • Select Discard, and pressthe Select soft key.Ring ToneYou may set the received tone as your phone’s ringtone. You may save up to 10 tones.When you receive a ring tone message:To... Then...Listen to the • Press the Options soft ring tone key. • Select Playback andpress the Select soft key.• Press the Stop soft key tostop playing back.Save the ring tone • Press the Options softkey.• Select Save and press theSelect soft key.• Select a location and pressthe Select soft key.• Select the Yes or No softkey when the phone asksif you want to set the ringtone to the received tone.Discard the • Press the Options soft message key.• Select Discard, and pressthe Select soft key.Use the saved Go to page xx.ring toneMMeessssaaggeessMMeessssaaggeess
73SSoouunndd SSeettttiinnggss72Alert Type Menu 3.3This option allows you to indicate how you are to beinformed of any incoming calls. The following optionsare available. Light Only: only the backlight is switched on; thephone neither rings nor vibrates.Melody: the phone rings using the ringer toneselected via the Ring Tone menu option (3.2).Vibration: the phone vibrates but does not ring. Vibra+Melody: the phone first vibrates three timesand then starts ringing.Step Melody: the phone rings using the selectedringer tone, but the volume becomes louder andlouder from the minimum level. Reaching to themaximum, the phone restarts from the minimum.Tone Length Menu 3.4The tone length setting enables you to select Short orLong DTMF (dual-tone multi-frequency) tones. DTMFtones are what your phone transmits to accessteleservices (such as a bank account). The system usedby the bank or other service determines if you needshort or long DTMF. If the service is digital (which mostare these days), short DTMF will almost always work.However, some new systems and almost all older(analog) system require you to use long DTMF tones.Sound SettingsYou can use the Sound Settings feature to customizevarious settings, such as the:• Ringing tone or melody, volume and type• Sounds made when you press a key, make anerror or receive a messageRing Volume Menu 3.1This option allows you to adjust the volume level ofthe ringer. Press the or key to increase or decrease thelevel. You can also use the or key on the leftside of the phone. The greater the number of barsyou see, the greater the volume is.Ring Tone Menu 3.2This option allows you to select the desired ringertone. You can choose from 23 different tones. Eachtime you select a tone, it sounds for a few seconds.Tones 19 and 20 correspond to the melodies that youcan compose, using the Melody Composer menuoption (3.9), and 10 additional options are ring tonereceived from the other sources (web or remotephones). (????)
7574Minute Minder Menu 3.7This option allows you to specify whether the phonemust beep every minute during an outgoing call tokeep you informed of the length of your call.The following options are available:OFF: the phone does not beep.ON: the phone beeps every minute.Connect Tone Menu 3.8You can set your phone to beep when your call isconnected to the remote phone (or the remote phoneis ringing depending on your network).The following options are available:OFF: the phone does not beep.ON: the phone beeps when your call is connected.Message Tone Menu 3.5This option allows you to select how the phoneinforms you that a new message has been received.The following options are available:Light Only: the service light in the top right-handcorner of the phone flashes.Single Beep: the phone beeps once.SMS Tone1~10: the phone uses an SMS tone. Youare provided with ten SMS tones.Error Tone Menu 3.6This option allows you to select how the phoneinforms you that you have made a mistake. The following options are available:OFF: the phone does not beep.ON: the phone beeps to indicate an invalid entry.SSoouunndd SSeettttiinnggssSSoouunndd SSeettttiinnggss
7776To... Then press the...Listen to your Listen soft key.melodyModify your Modify soft key.melodySaving a MelodyWhen you are satisfied with your melody afterlistening to it, you can save the melody and indicatethat you wish to use it as the ring tone.1. Press the Save soft key.2. Enter a title for the melody, and press the OK softkey.Note: For further details on how to entercharacters, refer to page xx.You are asked if the melody is to be set as the ringtone.3. To use the melody as the ring tone, press the Yessoft key. The melody is saved and set to thecurrent ring tone. Otherwise, press the No soft key. The melody issaved only.Note: You can also select the melodies composed viathe Ring Tone menu option (3.2); they are tones19 and 20 respectively.Melody Composer Menu 3.9This option allows you to compose your own melodyto be used as the ring tone.Three octaves are available. A maximum of 100 notescan be entered. You can adjust the length of thenotes and add rests, as required.Composing a MelodyYou can compose two melodies. When you accessthe menu, the names of any melodies created aredisplayed. Otherwise, Melody 1 and Melody 2 appear.Select the melody that you wish to create or edit.To... Then press the...Compose a Edit soft key.melodyInsert a note Next soft key.Move a note a key.semitone upMove a note a key.semitone downChange the key one or more times until length of a note the note is of the required length.Delete a note Ckey.Enter a rest key one or more times for therequired length of time.SSoouunndd SSeettttiinnggssSSoouunndd SSeettttiinnggss
7978PPhhoonnee SSeettttiinnggssPhone SettingsMany different features of your phone can becustomized to suit your preferences via the PhoneSettings menu.Greeting Message Menu 4.1This option allows you to set a greeting to bedisplayed briefly when the phone is switched on. Thecurrent message is displayed.To... Then press the...Clear the existing Ckey and hold it down untilmessage the message is cleared.Enter a new Appropriate alphanumericmessage keys. For further details on how toenter characters, refer to pagexx.Save the message OK soft key.LCD Control Menu 4.2Back LightYou can select whether or not the phone uses thebacklight. A marginal increase in standby/talk time canbe achieved by turning the backlight off.The following options are available:OFF: the backlight is not used.Short: the backlight comes on when you press a keyor receive a call and switches off 10 seconds afterthe last key is pressed.Long: the backlight comes on when you press a keyor receive a call and switches off 20 seconds afterthe last key is pressed.ContrastThis option allows you to adjust the contrast of theLCD screen by pressing the or key. You canalso use the or key on the left side of thephone. Each time you slide the key, you can see theLCD screen changing according to the current value.Service Light Menu 4.3This option allows you to select whether or not theservice light in the top right-hand corner of the phoneis used. The following options are available:OFF: the service light is not used.ON: the service light flashes when the phone isready for use.
8180Auto Redial Menu 4.4With the Auto Redial function, the phone makes upto ten attempts to redial a phone number after anunsuccessful call.Note: The interval between two call attempts variesdepending on the network.The following options are available:OFF: the number is not redialed.ON: the number is redialed automatically.Answer Mode Menu 4.5This option allows you to select how incoming callsare to be answered.The following options are available:Open Answer: to answer a call, you can simplyopen the folder. When it is already open, pressingthe key answers the call.Any Key Answer: to answer a call, you can pressany key except the key. Pressing the keymutes the ringer.Send Key Answer: to answer a call, you must pressthe key. Pressing the key mutes the ringer.Language Menu 4.6You can select a display language. The availablelanguage options are: English, Español, andPortuguês.Reset Settings Menu 4.7You can easily reset the menu settings to its factorydefault status. Enter the 4-digit security code and press the OK softkey. The phone immediately resets all settings todefault status.Note: The security code is preset to “0000.” Tochange this code, refer to page xx.Calling Card Menu 4.8When you use a calling card for long distance calls,you must send the service code and the card numberto the calling card service system. Using this menu,you can save these calling card information to sendthem automatically when you make calling card calls.You can store up to five calling cards.Enter 4-digit security code and press the OK soft keyto access the Calling Card menu.PPhhoonnee SSeettttiinnggssPPhhoonnee SSeettttiinnggss
8382Selecting a Calling CardYou can set the default card to use for making acalling card calls. The number stored in the selectedcard will be sent when you make calling card calls.1. Scroll to the desired calling card by pressing theor key, and press the Select soft key.2. Select Set Default by pressing the or key,and press the Select soft key.3. The display shows the number saved for the callingcard. If you are satisfied, press the Set soft key.4. To return to idle mode, press the key.Making Calls Using the Calling CardNote: The procedure may not apply to all callingcards. Please look at the back of your callingcard or contact your phone company forinstructions.1. Make a call to the calling card service system.2. When you are connected, press the Options softkey and select Callcard Service by pressing theor key.3. Press the OK soft key.4. When you hear the prompting tone from theservice system, press the key to transmit thecard numbers.5. Dial the number of the desired remote phone.Saving Calling Card Information1. Scroll to a calling card number by pressing the or key, and press the Select soft key.2. If you want to set the card name, press the Selectsoft key. Enter the name as needed. For further details on entering characters, see pagexx.3. When entering name is finished, press the OK softkey. The name is saved.4. Press the key to move to the Card Numbermenu, and press the Select soft key.5. Enter the card number (and/or PIN if required) aslisted on the back of the calling card.To enter a pause, “P” before the second number,press and hold the key. The number after “P”will be sent only by pressing the key when youmake a call with the calling card.Note: The order of the numbers which you mustenter may vary depending on the dialingsequence your card uses. 6. When entering the number is finished, press theOK soft key.7. To return to idle mode, press the key.PPhhoonnee SSeettttiinnggssPPhhoonnee SSeettttiinnggss
8584OrganizerThe Organizer feature enables you to:• View the calendar and organize your schedule• Define a list of things to do• Set the current date and time• Set the alarm so that the phone rings at a specifictime (to remind you of an appointment for example)• Use the phone as a calculatorCalendar Menu 5.1With the Calendar feature, you can:• Consult the calendar• Write memos to keep track of your schedule andtrigger an alarm if necessaryConsulting the CalendarWhen you select the Calendar menu option (5.1), thecalendar is displayed. The following options areavailable when you press the Options soft key:Search all: displays all memos set, regardless of theday and starting with the oldest. To scroll through thememos, press the or key.Delete all: allows you to delete all memos. You areasked to confirm your selection.Go to date: allows you to jump to a specific date.Shortcut Menu 4.9The navigation key can also be used as shortcut keys.When slid or pressed in idle mode, it allows you toaccess specific menu options directly.Using this menu, the following menu options can beassigned to the shortcut keys:• Calendar (Menu 5-1)• Calculator (Menu 5-5)• Messages (Menu 2)• Sound Settings (Menu 3)• Games (Menu 8)• To Do List (Menu 5-2)• Phonebook (with the entries listed by name)• New Inbox (Menu 2-2-1)1. Select the key to be used as a shortcut key bypressing the or key, and press the Selectsoft key: •Key down•Key leftNote: The and keys are fixed to enter theWAP Browser and Voice Memo menusrespectively.2. Select the menu option to be assigned to the keyby pressing the or key, and press theSelect soft key.Note: To deactivate a shortcut key, select the Noneoption.PPhhoonnee SSeettttiinnggss
87OOrrggaanniizzeerrOnce you have finished editing the memo, press theOK soft key. The following options are availablewhen you press the Options soft key:Alarm: allows you to set the alarm to ring on thechosen day.Erase: allows you to delete the memo.Copy to: allows you to copy the memo to anotherdate.Move to: allows you to change the date and time ofthe memo.New: allows you to write a new memo.To Do List Menu 5.2This feature allows you to:• Draw up a list of tasks to be done• Assign a priority and deadline to each task• Sort the tasks by priority and status mark ( fortasks to be done, ✓for completed tasks)Creating the To Do ListTo create the To Do List, take the following steps:1. Press the New soft key.2. Enter the first task.Note: For further details on how to entercharacters, see page xx.3. Press the OK soft key.Writing a MemoTo write or edit a memo on a specific date, take thefollowing steps:1. Select the required date in the calendar, bypressing the navigation keys.Note: Press the key to skip to the previousmonth or the key to skip to the nextmonth.2. Press the Select soft key. An empty memo screen is displayed to allow you toenter your memo.3. Enter your memo and then press the OK soft key.Note: For further details on how to entercharacters, refer to page xx.You are asked if you wish to set the alarm.4. If you want the alarm to ring on the chosen day,press the Yes soft key. Otherwise, press the No soft key.5. If you pressed Yes, set the time for the alarm andpress the OK soft key.A check mark is displayed in front of the date in thecalendar to indicate that a memo exists.Editing a MemoIf you select a day for which a memo already exists,you can press the Edit soft key to edit the memodisplayed. Note: For further details on how to enter characters,refer to page xx.86OOrrggaanniizzeerr
89OOrrggaanniizzeerr88OOrrggaanniizzeerrTo... Then...Sort the existing • Press the Options soft key.tasks by priority • Select the Sort option.or status • Select the sort criterion (High,Low, Done, Undo).Copy a task • Highlight the task.• Press the Options soft key.• Select the Copy option.• Change the text, priority anddeadline for the task asrequired.Delete a task • Highlight the task.• Press the Options soft key.• Select the Delete option.Delete all tasks • Press the Options soft key.• Select the Delete all option.• Confirm the deletion bypressing the OK soft key.Time & Date Menu 5.3This option allows you to change the current timeand date displayed. You can also check the currenttime for Greenwich Mean Time (GMT) and 21 majorcities around the world.Set Time: allows you to enter the current time. Youcan choose the time format via the Format menuoption (5.3.4).4. Select High or Low priority by pressing the orkey, and press the Select soft key.5. Enter your deadline. If you do not want to definethe deadline, press the Skip soft key.6. Press the OK soft key to save the task.Editing the To Do ListIf tasks are already defined in the To Do List when youselect the To Do List menu option (5.2), the currentcontents are displayed with the associated priorityand status mark. The following options are available:To... Then...View the details • Highlight the task.for a specific task • Press the View soft key.Change the status • Highlight the task.of a specific task • Press the key to mark the( or ✓) task as completed as of thecurrent date and time.or• Highlight the task.• Press the Options soft key.• Select the Mark option.• Select the appropriate status.Create a new task • Press the Options soft key.• Select the New option.• Enter the text, priority anddeadline for the task.Edit an existing • Highlight the task.task • Press the Options soft key.• Select the Edit option.• Change the text, priority anddeadline for the task.
9190Note: Before setting the time, you must specify yourtime zone, via the World Time menu option (5.3.3).Set Date: allows you to enter the day, month andyear. You can change the date format via the Formatmenu option (5.3.4).World Time: allows you to check the current timefor Greenwich Mean Time (GMT) and 21 major citiesaround the world, by pressing the or key.The screen shows the:• City name• Current date and time• Time difference between the selected city andyour city if you have set the local time (see belowfor further details) or GMT (by default)To select the time zone in which you are located,take the following steps:1. Select the city corresponding to your time zone bypressing the or key.The local date and time are displayed.2. Press the Set soft key.Format: allows you to change the time and dateformats.Time format: 24 Hours12 HoursDate format: YYYY/MM/DD (year/month/day)DD/MM/YYYY (day/month/year)MM/DD/YYYY (month/day/year)Alarm Menu 5.4You can set the alarm to ring at a specific time.Note: To meet FAA safety guidelines, the alarm doesnot function when the phone is off.The following frequency options are available.Once Alarm: the alarm rings only once and is thendeactivated.Daily Alarm: the alarm rings every day at the sametime.Weekly Alarm: the alarm rings every week on thesame day and at the same time.To set the alarm, take the following steps:1. Choose the alarm frequency option and press theSelect soft key.2. Enter the required time and press the OK soft key.3. If you select Weekly alarm in step 1, select theday of the week and the OK soft key.To stop the alarm when it rings, open the folder andpress the Exit soft key. Remove Alarm: deactivates the alarm.OOrrggaanniizzeerrOOrrggaanniizzeerr
9392Calculator Menu 5.5Using this feature, you can use the phone as acalculator. The calculator provides the basic arithmeticfunctions; addition, subtraction, multiplication anddivision.1. Enter the first number using the numeric keys.2. Press the right soft key until the requiredarithmetic symbol appears: +(add), -(subtract),*(multiply), /(divide).3. Enter the second number.4. Repeat steps 2 to 3 as many times as required.Notes:• To erase any mistakes and clear the display,press the Ckey.• To include a decimal point or a bracket, press theleft soft key until the required symbol is displayed.5. To calculate the result, press the key.6. To end the calculation, press the key.OOrrggaanniizzeerrSecurityThe Security feature enables you to restrict the useof your phone to:• The people of your choice• The types of calls of your choiceChange Lock Code Menu 6.1The lock code is a password for locking or unlockingthe phone. The lock code is preset to “0000” atfactory. This menu allows you to change your currentlock code to a new one. Before you can specify a new lock code, you mustenter the current code. Then, enter a new code andenter it again to confirm.Change Security Code Menu 6.2The security code is used for restriction of the use ofyour phone. The security code is preset to “0000” atfactory. This menu allows you to change your currentsecurity code to a new one. Before you can specify a new security code, youmust enter the current code. Then, enter a new codeand enter it again to confirm.
9594SSeeccuurriittyySSeeccuurriittyyCall Restriction Menu 6.3The call restriction feature allows you to restrict yourcalls.Call restriction can be set up in the following ways:restrict all outgoing call: calls cannot be made.restrict all Incoming call: calls cannot bereceived.restrict outgoing call: calls to the phone numberswhich you have specified cannot be made. You canset up to 10 phone numbers.To restrict the all outgoing or all incoming calls, takethe following steps:1. Select restrict all outgoing call or restrict allincoming call by pressing the or key,and then press the Select soft key.2. Select Enable to the feature on, and press theSelect soft key.If you want to set the restriction off, selectDisable.3. Enter your security code and press the OK softkey.To set the phone numbers to be restricted, take thefollowing steps:1. Select restrict outgoing call by pressing the or key, and then press the Select soft key.2. Enter your security code and press the OK softkey.3. Select an empty location by pressing the orkey, and press the Options soft key.4. Select Edit, then the OK soft key. If a number hasalready been saved, this option allows you to editthe number.If you want to erase a saved number, selectErase. When a confirmation displays, press theYes soft key.5. Enter the phone number and press the OK softkey. The phone number is saved and now youcannot make a call to the number.SOS Call List Menu 6.4Your phone provides emergency numbers for SOScalls programmed by the service provider. Threenumbers can be manually dialed at any time evenwhen the phone is locked or all outgoing calls arerestricted. To make an SOS call when the phone is locked, pressthe SOS soft key, select the desired number saved inthe SOS call list, and then press the Call soft key.
96 973. Enter the number to which the calls are to bediverted, and press the OK soft key.Note: The Names soft key visible when you do notenter anything allows you to search for anumber in your Phonebook.The phone sends your setting to the network andthe network’s acknowledgement is displayed.You can deactivate each call diverting setting byselecting the Cancel option.Call Waiting Menu 7.2This network service enables you to be informed whensomeone is trying to reach you during another call.Note: For using the Call Waiting service, you mustset the service code for it. Depending on theSet Service Code setting, this menu may notappear. For details, see page xx.The following options are available:Activate: activates the Call Waiting feature. You cananswer an incoming call while you have a call inprogress. See page xx for answering a waiting call.Cancel: deactivates the Call Waiting feature.Network ServicesThese menu functions are network services.Please contact your service provider to check theiravailability and subscribe to them, if you so wish.Call Diverting Menu 7.1Note: For using the Call Diverting service, you mustset the service code for it. Depending on theSet Service Code setting, this menu may notappear. For details, see page xx.This network service enables incoming calls to bererouted to the number that you specify.Example: You may wish to divert your business callsto a colleague while you are on holiday.Call diverting can be set up in the following ways:1. Select the type of the call diverting options bypressing the or key, and press the Selectsoft key.• Divert Always: all calls are diverted.• Busy: calls are diverted if you are already makinganother call.2. When Activate is highlighted, press the Selectsoft key.NNeettwwoorrkk SSeerrvviicceess
9998NNeettwwoorrkk SSeerrvviicceessNNeettwwoorrkk SSeerrvviicceessVoice Privacy Menu 7.4Used only in digital networks, Voice Privacy encryptsthe voice channel so that people cannot eavesdropon your call conversation. If you turn this feature onand voice privacy becomes inactive for any reasonyour phone displays “Voice privacy not active” andbeeps.The following options are available:Activate: turns this feature on. Your calls will besecured.Deactivate: turns this feature off.Note: This feature may not be available in all areas.Contact your service provider for details andavailability.NAM Selection Menu 7.5The service provider programs your phone with thephone number and system information when yourphone is first activated. This is called a NumberAssignment Module (NAM).For example, your phone can be activated in up to 4different service areas each giving your phone adifferent phone number or account.Only one number can be active at a time. When youselect a phone number, you are also selecting whichsystem to be used as your home system. The firstphone number displayed with this menu is thecurrently selected number.Network Selection Menu 7.3The Network Selection feature enables you toindicate whether the network to used when roaming(outside your home area) is selected automaticallyor manually.Note: You can select a network other than yourhome network only if it has a valid roamingagreement with your home network.The following options are available:Automatic: your phone automatically searches for anetwork available to you and chooses theappropriate one. Every time you switch your phoneon, this menu resets to Automatic.Manual: your phone searches for availablenetworks, then displays them. Press the or key until the preferred network is highlighted andthen press the OK soft key.New Search: your phone begins a new search fornew Private and Residential systems. When findingthe best new system, the phone displays it. Then youcan confirm by pressing the Select soft key, or startanother search by pressing the Next soft key.
101Notes: • It may not be necessary to have four NAMs foryour phone if your service provider has service orroaming agreements for each area in which youwish to use your phone. Contact your serviceprovider for details.• You need at least one active number to make acall. You cannot change from one NAM to anotherduring a call.Set Service Code Menu 7.6For using the network services, such as the CallDiverting and Call Waiting, you must set the servicecodes supplied by your service provider with thismenu. For more information on the service code,contact your service provider.Call Diverting: allows you to set the codes for usingeach of the options (Divert Always, Busy, NoReply, Unreachable and Cancel All) in the CallDiverting. Call Waiting: allows you to set the codes for usingeach of the options (Activate and Cancel ) in theCall Waiting. After selecting the desired option, enter the servicecode and press the OK soft key. The service code issaved and the option will be selectable when youaccess the appropriate menu.100NNeettwwoorrkk SSeerrvviicceessNNeettwwoorrkk SSeerrvviicceessPublic System Selection Menu 7.7Note: This menu may not be shown depending onthe service providers.When your system leaves its home system, it isroaming. Roaming is a feature which is only relevantin areas where there are usually at least two serviceproviders which are referred to as “A” and “B” andhave valid roaming agreements. When the phone isroaming, it can automatically search for home-typesystems (same type as your home system) or non-home type systems (opposite type as your homesystem). Also, your service provider has programmeda list of preferred systems into your phone.The system selection feature of your phone enablesyou to choose how your phone will roam. Thefollowing options are available:Home Type: When the service is not available inyour home system, it will search for a home type,preferred first.Non Home Type: When the service is not availablein your home system, it will search for a non-hometype, preferred first.Any System: When service is not available in yourhome system, the phone searches for a preferredsystem of either type, then a home type system, thena non-home type system.Home Only: The phone uses its home system only(that is, it will not roam).
102 103GamesUsing this feature, you can play seven differentgames with the phone:• Casino• Roulette• Black Jack• Sniper• Snake• Mole• OthelloOnce you have selected a game, the followingoptions are available:Play: allows you to start a game.Level: allows you to select the level of difficulty.Select the required level by pressing the or key, and press the OK soft key. This option is onlyavailablein games with several levels (Sniper,Snake).Configuration: allows you to configure the phonefor the chosen game (backlight and sound settings).To adjust each setting, highlight the Backlight orSound option by pressing the or key, andthen toggle between ON ( ✓) and OFF () bypressing the On/Off soft key.Instructions: describes the buttons used by thegame. If necessary, press the or key to see amore detailed description. High Score: enables you to view the highest scorerecorded for the selected game. You can also resetthis score by pressing the Reset soft key.If you break the current record for the game, thephone displays the High Score screen.To stop playing a game, press the Cor key.GGaammeess
105104Voice MemoYou can use the phone as a recorder by pressing thekey. In idle mode, it records a voice memo, andwhile you are on the phone, it records the phoneconversation during a call. To access the Voice Memo menu, press the key inidle mode.Notes: • Your phone can record up to 10 memos, and eachmemo can be up to 1 minute in length of time.• Closing the folder while recording cancelsrecording. • If you have an incoming call while recording avoice memo, or the call is disconnected whilerecording phone conversation, the memo recordedup to that point is saved with the stamp of thecurrent date and time.• When you are out of the service area(‘No Service’is displayed)or in analog mode, a voice memo isnot correctly recorded. It is recommended that youuse this feature in digital mode in the service area.Record To record a voice memo, select this menu or pressand hold the key in idle mode. To record a phone conversation, press and hold thekey while you are on the phone. WAP BrowserYour phone is equipped with a WAP browser to allowyou to access and navigate the wireless web via yourphone.For further details on the WAP browser menu, referto the WAP Browser User’s Manual supplied withyour phone.
107VVooiiccee MMeemmooVVooiiccee MMeemmoo1061. The message “Recording” displays, along withthe timer. 2. Record a memo by speaking to the microphone ortalking to the remote person.3. To stop recording, press the Stop soft key.If you are recording a phone conversation, it isautomatically saved with the title of the currentdate and time.If you are recording a voice memo, you are askedto enter the title for the recorded message. Go tonext step.4. Enter the desired title up to 16 characters usingthe keypad, then press the Save soft key to savethe recording. For details on entering characters,see page xx.If you do not enter a title, Untitled is saved asthe label. Note: Recording voice conversations is illegal insome countries. Make sure the other party hasstated its consent to being recorded.Replay & DeleteUsing this menu, you can play back a recordedmessage and delete it if you want. 1. When the display shows the title of the currentlyselected memo, press the or key todisplay the memo you want to play.2. Press the Play soft key to play back the recordedmessage currently displayed. 3. When you have finished reviewing, press theStop soft key.4. If you want to delete the memo, press the Deletesoft key.5. When the phone confirms your selection, pressthe Yes soft key. If you do not want to delete the memo, press theNo soft key.6. Repeat steps 1 through 5 as necessary.7. When you have finished, press the key toreturn to idle mode.
109108VVooiiccee MMeemmooEdit TitleYou can change the title of the selected memo.1. The display shows the title of the currentlyselected memo. Press the or key to scrollto the memo title you want to edit.2. Press the Edit soft key. 3. Enter the desired title up to 16 characters usingthe keypad. For details on entering characters,see page xx.4. When entering is done, press the Save soft key tosave the new title. 5. When you have finished, press the key toreturn to idle mode.Solving ProblemsBefore contacting the after-sales service, perform thefollowing simple checks. They may save you the timeand expense of an unnecessary service call.“No service”, “Network failure” or “Not done”is displayed• The network connection was lost. You may be in aweak reception area (in a tunnel or surrounded bybuildings). Move and try again.• You are trying to access an option for which youhave not taken out a subscription with yourservice provider. Contact the service provider forfurther details.You have entered a number but it was not dialed• Have you pressed the key?• Are you accessing the right cellular network?• You may have chosen to restrict outgoing calls.Your correspondent cannot reach you• Is your phone switched on ( pressed formore than one second)?• Are you accessing the right cellular network?• You may have chosen to restrict incoming calls.• You may be in a weak signal area. More and tryagain.
111110Health and SafetyInformationExposure to Radio Frequency (RF) SignalsYour mobile phone is a radio transmitter and receiver.It is designed and manufactured not to exceed theemission limits for exposure to radio frequency (RF)energy set by the Federal CommunicationsCommission of the U.S. Government. These limits arepart of comprehensive guidelines and establishpermitted levels of RF energy for the generalpopulation. Those guidelines are consistent with thesafety standard previously set by both U.S. andinternational standards bodies:• American National Standards Institute (ANSI) IEEE.C95.1-1992• National Council on Radiation Protection andMeasurement (NCRP). Report 86• International Commission on Non-IonizingRadiation Protection (ICNIRP) 1996• Ministry of Health (Canada), Safety Code 6.The standards include a substantial safety margindesigned to assure the safety of all persons,regardless of age and health.The exposure standard for wireless mobile phonesemploys a unit of measurement known as theSpecific Absorption Rate, or SAR. The SAR limit setby the FCC is 1.6W/kg.**In the U.S. and Canada, the SAR limit for mobile phones used by the publicis 1.6 watts/kg(w/kg) averaged over on gram of tissue. The standardincorporates a substantial margin of safety to give additional protection for thepublic and to account for any variations in measurements.Your correspondent cannot hear you speaking• Have you switched off the microphone (mute)?• Are you holding the phone close enough to yourmouth? The microphone is located in the bottomcenter of the phone.The phone starts beeping and “**Warning** Low Battery” flashes in the display• The battery power is weak. Replace the batteryand recharge it.The audio quality of the call is poor• Check the signal strength indicator in the display( ); the number of bars after it indicates thesignal strength from strong ( ) to weak ( ).• Try moving the phone slightly or moving closer toa window if you are in a building.No number is dialed when you recall a Phonebookentry• Check that the numbers have been storedcorrectly, by using the Phonebook Search feature.• Re-store the number, if necessary.If the above guidelines do not enable you to solvethe problem, take a note of:• The model and serial numbers of your phone• Your warranty details• A clear description of the problemThen contact your local dealer or SAMSUNG after-sales service.SSoollvviinngg PPrroobblleemmss
113112For additional information concerning exposure toradio frequency signals, see the following websites:Federal Communications Commission (FCC) RFSafety program (select “Information on HumanExposure to RF Fields from Cellular and PCS RadioTransmitters”):http://www.fcc.gov/oet/rfsafetyCellular Telecommunications IndustryAssociation (CTIA): http://www.wow-com.comWorld Health Organization (WHO) InternationalCommission on Non-ionizing Radiation Protection(select Qs & As):http://www.who.int/emfUnited Kingdom, National RadiologicalProtection Board: http://www.nrpb.org.ukU.S.Food and Drug Administration (FDA) Centerfor Devices and Radiological Health:http://www.fda.gov/cdrh/consumer/HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnTests for SAR are conducted using standardoperating positions specified by the FCC with thephone transmitting at its highest certified powerlevel in all tested frequency bands. Although the SARis determined at the highest certified power level,the actual SAR level of the phone while operationcan be well below the maximum value. This isbecause the phone is designed to operate at multiplepower levels so as to use only the power required toreach the network. In general, the closer you are to awireless base station antenna, the lower the poweroutput. Before a phone model is available for sale to thepublic, it must be tested and certified to the FCC thatit does not exceed the limit established by thegovernment-adopted requirement for safe exposure.The tests are performed in positions and locations(e.g., at the ear and worn on the body) as required bythe FCC for each model. (Body-worn measurementsdiffer among phone models, depending uponavailable accessories and FCC requirements). Whilethere may be differences between the SAR levels ofvarious phones and at various positions, they allmeet the government requirement for safetyexposure.For body worn operation, to maintain compliancewith FCC RF exposure guidelines, use only Samsung-approved accessories. When carrying the phonewhile it is on, use the specific Samsung belt-clip thathas been tested for compliance.Use of non-SAMSUNG-approved accessories mayviolate FCC RF exposure guidelines and should beavoided.
115114HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnPrecautions When Using BatteriesYour phone is powered by a rechargeable Li-ionstandard battery. • Never use any charger or battery that is damagedin any way.• Use the battery only for its intended purpose.• If you use the phone near the network’s basestation, it uses less power; talk and standby timesare greatly affected by the signal strength on thecellular network and the parameters set by thenetwork operator.• Battery charging times depend on the remainingbattery charge and the type of battery and chargerused. The battery can be charged and dischargedhundreds of times, but it will gradually wear out.When the operation time (talk time and standbytime) is noticeably shorter than normal, it is timeto buy a new battery.• If left unused, a fully charged battery willdischarge itself over time.• Use only Samsung-approved batteries andrecharge your battery only with Samsung-approvedchargers. When a charger is not in use, disconnectit from the power source. Do not leave the batteryconnected to a charger for more than a week,since overcharging may shorten its life.• Extreme temperatures will affect the chargingcapacity of your battery: it may require cooling orwarming first.• Do not leave the battery in hot or cold places, suchas in a car in summer or winter conditions, as youwill reduce the capacity and life-time of thebattery. Always try to keep the battery at roomtemperature. A phone with a hot or cold batterymay temporarily not work, even when the batteryis fully charged. Li-ion batteries are particularlyaffected by temperatures below 0 °C (32 °F).• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,clip or pen) causes a direct connection betweenthe + and - terminals of the battery (metal stripson the back of the battery), for example whenyou carry a spare battery in a pocket or bag.Short-circuiting the terminals may damage thebattery or the object causing the short-circuit.• Dispose of used batteries in accordance with localregulations. Always recycle. Do not dispose ofbatteries in a fire.
117116HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnRoad SafetyYour wireless phone gives you the powerful ability tocommunicate by voice-almost anywhere, anytime.But an important responsibility accompanies thebenefits of wireless phones, one that every usermust uphold.When driving a car, driving is your first responsibility.When using your wireless phone behind the wheel ofa car, practice good common sense and rememberthe following tips:1. Get to know your wireless phone and its featuressuch as speed dial and redial. If available, thesefeatures help you to place your call without takingyour attention off the road.2. When available, use a hands-free device. Ifpossible, add an additional layer of convenienceand safety to your wireless phone with one of themany hands-free accessories available today.3. Position your wireless phone within easy reach. Beable to access your wireless phone withoutremoving your eyes from the road. If you get anincoming call at an inconvenient time, if possible,let your voice mail answer it for you.4. Let the person you are speaking with know you aredriving; if necessary, suspend the call in heavytraffic or hazardous weather conditions. Rain,sleet, snow, ice, and even heavy traffic can behazardous.5. Do not take notes or look up phone numbers whiledriving. Jotting down a “to do” list or flippingthrough your address book takes attention awayfrom your primary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible,place calls when you are not moving or beforepulling into traffic. Try to plan calls when your carwill be stationary. If you need to make a call whilemoving, dial only a few numbers, check the roadand your mirrors, and continue.7. Do not engage in stressful or emotionalconversations that may be distracting. Makepeople you are talking with aware you are drivingand suspend conversations that have the potentialto divert your attention from the road.8. Use your wireless phone to call for help. Dial 9-1-1or other local emergency number in the case offire, traffic accident or medical emergencies.Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others inemergencies. If you see an auto accident, crime inprogress or other serious emergency where livesare in danger, call 9-1-1 or other local emergencynumber, as you would want others to do for you.
11911810. Call roadside assistance or a special non-emergencies wireless assistance number whennecessary. If you see a broken-down vehicleposing no serious hazard, a broken traffic signal,a minor traffic accident where no one appearsinjured, or a vehicle you know to be stolen, callroadside assistance or other special non-emergency wireless number.Operating EnvironmentRemember to follow any special regulations in forcein any area and always switch off your phonewhenever it is forbidden to use it, or when it maycause interference of danger.When connecting the phone or any accessory toanother device, read its user’s guide for detailedsafety instructions. Do not connect incompatibleproducts.As with other mobile radio transmitting equipment,users are advised that for the satisfactory operationof the equipment and for the safety of personnel, it isrecommended that the equipment should only beused in the normal operating position (held to yourear with the antenna pointing over your shoulder).Electronic DevicesMost modern electronic equipment is shielded fromradio frequency (RF) signals. However, certainelectronic equipment may not be shielded againstthe RF signals from your wireless phone.PacemakersPacemaker manufacturers recommend that aminimum separation of 6 inches (20 cm) bemaintained between a hand-held wireless phone anda pacemaker to avoid potential interference with thepacemaker. These recommendations are consistentwith the independent research by andrecommendations of Wireless Technology Research.Persons with pacemakers:• Should always keep the phone more than 6inches (15 cm) from their pacemaker when thephone is switched on;• Should not carry the phone in a breast pocket;• Should use the ear opposite the pacemaker tominimize the potential for interference.• If you have any reason to suspect thatinterference is taking place, switch off yourphone immediately.Hearing AidsSome digital wireless phones may interfere withsome hearing aids. In the event of such interference,you may want to consult your hearing aidmanufacturer to discuss alternatives.HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
121120Other Medical DevicesIf you use any other personal medical device, consultthe manufacturer of your device to determine if theyare adequately shielded from external RF energy.Your physician may be able to assist you in obtainingthis information. Switch off your phone in healthcare facilities when any regulations posted in theseareas instruct you to do so. Hospitals or health carefacilities may be using equipment that could besensitive to external RF energy.VehiclesRF signals may affect improperly installed orinadequately shielded electronic systems in motorvehicles. Check with the manufacturer or itsrepresentative regarding your vehicle. You shouldalso consult the manufacturer of any equipment thathas been added to your vehicle.Posted FacilitiesSwitch off your phone in any facility where postednotices so require.Potentially Explosive AtmospheresSwitch off your phone when in any area with apotentially explosive atmosphere and obey all signsand instructions. Sparks in such areas could cause anexplosion or fire resulting in bodily injury or evendeath.Users are advised to switch off the phone while at arefueling point (service station). Users are remindedof the need to observe restrictions on the use ofradio equipment in fuel depots (fuel storage anddistribution areas), chemical plants or where blastingoperations are in progress.Areas with a potentially explosive atmosphere areoften but not always clearly marked. They includebelow deck on boats; chemical transfer or storagefacilities; vehicles using liquefied petroleum gas(such as propane or butane); areas where the aircontains chemicals or particles, such as grain, dustor metal powders; and any other area where youwould normally be advised to turn off your vehicleengine.HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
123122VehiclesOnly qualified personnel should service the phone, orinstall the phone in a vehicle. Faulty installation orservice may be dangerous and may invalidate anywarranty which may apply to the unit.Check regularly that all mobile phone equipment onyour vehicle is mounted and operating properly.Do not store or carry flammable liquids, gases orexplosive materials in the same compartment as thephone, its parts or accessories.For vehicles equipped with an air bag, remember thatan air bag inflates with great force. Do not placeobjects, including both installed or portable wirelessequipment in the area over the air bag or in the airbag deployment area. If in-vehicle wirelessequipment is improperly installed and the air baginflates, serious injury could result.Switch off your phone before boarding an aircraft.The use of mobile phones in an aircraft may bedangerous to the operation of the aircraft, disrupt thewireless telephone network and may be illegal.Failure to observe these instructions may lead to thesuspension or denial of telephone services to theoffender, or legal action, or both.Emergency CallsImportant!This phone, like any mobile phone, operates using radiosignals, wireless and landline networks as well asuser-programmed functions which cannot guaranteeconnection in all conditions. Therefore, you shouldnever rely solely upon any wireless phone for essentialcommunications (for example, medical emergencies).Remember, to make or receive any calls the phonemust be switched on and in a service area withadequate signal strength. Emergency calls may not bepossible on all wireless phone networks or whencertain network services and/or phone features are inuse. Check with local service providers.To make an emergency call:1. If the phone is not on, switch it on.2. Key in the emergency number for your presentlocation (for example, 911 or other official emergencynumber). Emergency numbers vary by location.3. Press < >.If certain features are in use (keyguard, restrict calls,etc.), you may first need to turn those features offbefore you can make an emergency call. Consult thisdocument and your local cellular service provider.When making an emergency call, remember to give allthe necessary information as accurately as possible.Remember that your phone may be the only means ofcommunication at the scene of an accident - do not cutoff the call until given permission to do so.HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
125124Care and MaintenanceYour phone is a product of superior design andcraftsmanship and should be treated with care. Thesuggestions below will help you to fulfill any warrantyobligations and allow you to enjoy this product formany years. When using your phone, battery, charger,OR any accessory:• Keep it and all its parts and accessories out ofsmall children’s reach.• Keep it dry. Precipitation, humidity and liquidscontain minerals that will corrode electroniccircuits.• Do not use or store it in dusty, dirty areas as itsmoving parts can be damaged.• Do not store it in hot areas. High temperatures canshorten the life of electronic devices, damagebatteries, and warp or melt certain plastics.• Do not store it in cold areas. When the phonewarms up (to its normal operating temperature),moisture can form inside the phone, which maydamage the phone’s electronic circuit boards.• Do not drop, knock or shake it. Rough handling canbreak internal circuit boards.• Do not use harsh chemicals, cleaning solvents, orstrong detergents to clean it. Wipe it with a softcloth slightly dampened in a mild soap-and-watersolution.• Do not paint it. Paint can clog the device’s movingparts and prevent proper operation.• Use only the supplied or an approved replacementantenna. Unauthorized antennas, modifications ofattachments could damage the phone and mayviolate regulations governing radio devices.• If the phone, battery, charger, or any accessory isnot working properly, take it to your nearestqualified service facility. The personnel there willassist you, and if necessary, arrange for service.HHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonnHHeeaalltthh aanndd SSaaffeettyy IInnffoorrmmaattiioonn
127Conference CallingAbility to establish a conference call involving up totwo additional parties.Hands-FreeA feature that permits a driver to use a wirelessphone without lifting or holding the handset - animportant safety feature for automobiles, tractorsand most other motorized vehicles.LCD (Liquid Crystal Display) Commonly used to refer to the screen display on thewireless phone.Phone PasswordLock code used to unlock the phone when you haveselected the option to lock it automatically each timeit switches on, and security code used to restrict theuse of your phone. RoamingUse of your phone when you are outside your homearea (when travelling for example).SMS (Short Message Service)Network service for sending and receiving messagesto and from another subscriber without having tospeak to the correspondent. The message created orreceived can be displayed, received, edited or sent.126GlossaryTo help you understand the main technical terms andabbreviations used in this booklet and take fulladvantage of the features on your mobile phone,here are a few definitions.Antenna A device for transmitting or receiving signals. Thesize and shape of antennas is determined, in part, bythe frequency of the signal they receive. Wirelessphones and the base station must have antennas.Call DivertingAbility to reroute calls to another mobile or fixedline.Call HoldingAbility to put one call on standby while answering ormaking another call; you can then switch betweenthe two calls, as required.Calling Line Identification Services (Caller-ID)Services allowing subscribers to view or block thetelephone numbers of callers.Call WaitingAbility to inform users that they have an incomingcall when engaged on another call.GGlloossssaarryy 07-Glossary 1/25/02 2:04 PM Page 126
129AAccessories • 7Adjusting volume • 22Alarm (5.4) • 76Alert Type (3.3) • 59Answeringa call • 22a second call • 42Answer mode (4.5) • 66Auto Redial (4.4) • 66BBacklight • 13; 64contrast • 65Batteriescharging • 16installing • 14low battery indicator • 17precautions • 94removing • 15CCalculator (5.5) • 78Calendar (5.1) • 70Caller group • 36ID • 23Calling card(4.9) • 68Callsanswering • 22a second call • 42conference • 43diverting (7.1) • 81ending • 21holding • 39incoming (1.2) • 51international • 20making • 20missed • 23; 50outgoing (1.3) • 51records (1) • 50redialing automatically • 66restriction (6.3) • 78SOS (6.4)• 80time (1.4) • 51via the phonebook • 21waiting (7.3) • 42, 82Care • 96Changinglock code (6.1) • 78security code (6.2) • 78Charactersentering • 31Charging batteries • 16ComposerMelody (3.9) • 61Conference calls • 43Connect to Voice Mail (2.1) • 52tone (3.8) • 61Contrast • 65Correcting numbers • 20DDate format (5.3.4) • 75setting (5.3.2) • 75Deletingmemos • 72missed calls • 25phonebook numbers • 34tasks • 74voice memo • 89Display • 11contrast • 69icons • 12setting the language (4.7) • 67Diverting calls (7.1) • 81128Soft KeysKeys marked on the phone, the purpose of which:• Varies according to the function that you arecurrently using• Is indicated on the bottom line of the display justabove the corresponding keyTDMATime division multiple access (TDMA) is a digitaltransmission technology that allows a number ofusers to access a single radio-frequency (RF) channelwithout interference by allocating unique time slotsto each user within each channel. The TDMA digitaltransmission scheme multiplexes three signals over asingle channel. The current TDMA standard forcellular divides a single channel into six time slots,with each signal using two slots, providing a 3 to 1gain in capacity over advanced mobile-phone service(AMPS). Each caller is assigned a specific time slotfor transmission. Voice MailA computerized answering service that answers acall, plays a greeting and records a message. GGlloossssaarryy The index will beupdated in later version.Index07-Glossary 1/25/02 2:04 PM Page 128
131EEarphone • 7Earpieceadjusting the volume • 20Editingmemos • 71messages • 54missed calls• 24phonebook numbers • 34To Do List • 73Voice memo title • 91Erasingmemos • 72missed calls • 25phonebook numbers • 34tasks • 74voice memo • 89Error Tone (3.6) • 60FFunctionsselecting • 26GGames (8) • 85Greeting Message (4.1) • 64Groupscaller • 36HHolding calls • 39IIconsdescription • 12ID, caller • 23Identifying a caller • 23Incoming Calls (1.2) • 50KKey tonesadjusting the volume • 22muting • 41selecting • 59sending • 41Keysdescription • 9location • 8navigation • 27LLanguage (4.7) • 67Last number redialing • 21Length of calls • 51Lettersentering • 31Lightbacklight • 13; 64service • 13; 65Lock code • 78Locking phone • 19Low battery indicator • 17MMaintenance • 98Melody Composer (3.9) • 61Memory status • 38Memosediting • 71erasing • 72writing • 71Menusby scrolling • 44by shortcut • 45list • 46using • 44Message Tone (3.5) • 60Messagesgreeting (4.1) • 64preset (2.4) • 56reading (2.2) • 53setup (2.5) • 56voice mail (2.1) • 52writing (2.3) • 55130M (continued)Microphone mute • 40Minute Minder (3.7) • 61Missed calls (1.1) • 50deleting • 25editing the number • 24viewing • 23; 50Mutekey tones • 41microphone • 40NNAM, selecting (7.5) • 84Namesentering • 31options • 36searching/dialing • 35storing in the phonebook • 30Network Selection (7.3) • 82Network Services (7) • 81Numbercorrecting • 20editing missed call • 24; 50phonebook • 34erasing phonebook • 34moving phonebook • 35own • 38redialing • 21automatically • 66searching/dialing •35storing in the phonebook • 30OOptionsselecting • 26Organizer (5) • 70Outgoing Calls (1.3) • 51Own Number • 38PPhone locking • 19Settings (4) • 64switching on/off • 18Phonebook • 30dialing • 35editing numbers • 34erasing numbers • 34making calls • 20moving numbers • 34options • 33searching • 35; 41storing numbers/names • 30Playing, voice memo • 89Preset Message List (2.4) •56Problem solving • 92RRead Messages (2.2) • 52Recording, voice memo • 88Redialingautomatically • 66last number • 21Replaying, voice memo • 89Reset Settings (4.8) • 67Restriction, call • 79RingTone (3.2) • 58type • 59Volume (3.1) • 58Roaming • 82IInnddeexxIInnddeexx07-Glossary 1/25/02 2:04 PM Page 130

Navigation menu