Samsung Electronics Co SWL-B70F WiFi Full Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2022182
Application ID	CuzB7QLHkqULqroebu3/VA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.75kB (346830 bits)
Date Submitted	2013-07-22 00:00:00
Date Available	2013-07-22 00:00:00
Creation Date	2013-07-16 11:45:42
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2013-07-22 09:12:36
Document Title	User Manual
Document Creator	Adobe InDesign CS4 (6.0.6)

Modular installation manual
WARNING
i. We recommend to keep 20cm distance when installing this module.
ii. This module should not be installed and operating simultaneously with other radio without
additional evaluation or FCC filing.
iii. The host system should have proper label showing that it "Contains FCC ID : A3LSWL-B70F"
Connecting network
Checking Wi-Fi module installation
f fOpen the filter cover and check the Wi-Fi Module (①) attached on the panel front. The connection status between the
Wi-Fi module and the wireless router can be checked by the Wi-Fi module described next page.
f fThe Display Wi-Fi LED is ON when the Wi-Fi module is connected to AP & Internet.
f fTo replace the Wi-Fi module(Assembling or disassembling), follow the procedure below.
NOTE
• When changing the Wi-Fi module, you should check the MAC attached on the module or bottom part of the indoor
unit and modify the device information at ‘Registering service’.
Disassembling the Wi-Fi module
1 . Remove the cover of the sub panel.
2 . Disconnect the wire of the Wi-Fi module.
3 . Release the hook on the top of the Wi-Fi module and push it up to disassemble it.
Assembling the Wi-Fi module
01 PREPARATION
1 . Push the Wi-Fi module down into a slot and fix the hook on the top.
2 . Connect the wire of the Wi-Fi module.
3 . Close the cover of the sub panel.
Checking the connection status on the panel-display
f fWi-Fi display description
1) Wi-Fi Indicator LED off :
Not connected with AP
Not connected with internet
2) Wi-Fi Indicator LED blinking :
Connected with AP
Not connected with internet
3) Wi-Fi Indicator LED on :
Connected with AP
Connected with internet
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Create Date                     : 2013:07:16 11:45:42+09:00
Creator                         : Adobe InDesign CS4 (6.0.6)
Modify Date                     : 2013:07:22 09:12:36+09:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2013:07:22 09:12:36+09:00
Creator Tool                    : Adobe InDesign CS4 (6.0.6)
Format                          : application/pdf
Document ID                     : uuid:87fd1b2b-e789-4c46-8a41-09eb254eee6c
Instance ID                     : uuid:5229941a-c935-44e2-9ffe-de88d15deda3
Producer                        : Adobe PDF Library 9.0
Page Count                      : 4

EXIF Metadata provided by EXIF.tools