Samsung Electronics Co WSZWM110C00 Z-wave Module User Manual

Samsung Electronics Co Ltd Z-wave Module

User Manual

Version 1.0 Samsung Electronics page 1 of 4 User manual of WSZWM110A00 1. Introduction WSZWM110A00 is a Z-wave module compliant with ITU-T G.9959 optimized for low-power applications. The ZigBee chipset is from Sigma Designs, part number SD3503. 2. Hardware Architecture: 2.1 Main Chipset Information Item Vendor Part Number ITU-T G.9959 Sigma Designs SD3503 2.2 Circuit Block Diagram The major internal and external block diagram of WSZWM110A00 is illustrated in Figure 1-1. Z-wave SoC(SD3503)X-tal(32MHz)SAW FilterUART+3.3VdcNRESET900MHz ChipAntennaF-MEM(2Mbit)SPII/O_PortI/O_PADI/O_PAD919.70~923.10MHz Figure 1-1 WSZWM110A00 block diagram and System Interface
Version 1.0 Samsung Electronics page 2 of 4 3. Operational Description WSZWM110A00 is the ITU-T G.9959 Z-wave Module that acts as a communication controller for users of a wireless device. - Features > Z-Wave ITU-T G.9959 > Z-Wave 9.6/40/100 kbit/s data rate >128-bit AES security processor and hardware random number generator - Time base of the RF frequency For Z-wave IF and RF frequency, a crystal(32MHz) is a clock reference. - Z-wave Tranceiver The WSZWM110A00 is a fully integrated module with an on-board antenna that allows the establishment of a Z-Wave network with minimum risk. The SD3503 chip is used with an external NVM (Serial Flash MEM), 32MHz crystal, power supply decoupling, SAW filter, matching circuit, and a PCB pattern Antenna. - Z-wave Receiver The module is converted into a digital signal through the available receive signal of 900MHz and low noise have a built-in amplifier to amplify the signal to the received signal to the low noise amplifiers to match the signal strength and the amplified signal is inside Chip ADC from the main processor the packet containing the information is interpreted.
Version 1.0 Samsung Electronics page 3 of 4 - Product Details > Data Modulation Z-Wave : FSK/GFSK for ITU-T G.9959 > Frequency : Z-wave
Version 1.0 Samsung Electronics page 4 of 4 - Product pwr Spec. Symbol Parameter Min Typ. Max Unit VDD Power supply 3.0 3.3 3.6 V - Product Spec. > Z-wave Parameter Min Typ. Max Unit RF Characteristics(NA) RF Frequency Range 919.70 - 923.10 MHz Output power 1 - 7 dBm TX Frequency Tolerance -25.0 - 25.0 KHz TX Harmonics 2nd Harmonics3rd Harmonics- - -30 dBm RX sensitivity PER at -85dBm - - 3 % RX Spurious Emission 30.0MHz to 12.5GHz - - -54 dBm Instruction to OEMThis device complies with Industry Canada’s license-exempt RSSs. Operation is subject tothe following two conditions:(1) This device may not cause interference and(2) This device must accept any interference, including interference that may cause undesiredoperation of the device.This application and its antenna must not be co-located or operation in conjunction with anyother antenna or transmitter. A minimum separation distance of 20cm must be maintainedbetween the antenna and the person for this appliance to satisfy the RF exposure requirements.Host labeling requirement: “Contains transmitter moduleFCC ID: A3LWSZWM110C00IC ID: 649E-WSZWM110C00This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference and(2) this device must accept any interference received, including interference that may causeundesired operation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu