Samsung Electronics Co YASBR510 BLUETOOTH SPEAKER SYSTEM User Manual YA SBR510 ENG indd
Samsung Electronics Co Ltd BLUETOOTH SPEAKER SYSTEM YA SBR510 ENG indd
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 931866 |
| Application ID | Uj2v4R/Xw4/tc2Gqh3RUYg== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 76.69kB (958583 bits) |
| Date Submitted | 2008-04-22 00:00:00 |
| Date Available | 2008-06-06 00:00:00 |
| Creation Date | 2008-04-03 17:17:45 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2008-04-03 17:40:31 |
| Document Title | YA-SBR510-ENG.indd |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | MyHome |
YA-SBR510-ENG.indd 19 2008-04-03 오후 5:18:02 Bluetooth Speaker Safety Information This manual describes how to properly use your speaker. So read it carefully to prevent a risk of damage to the product. Means that death or serious personal injury is a risk. Warning Caution Do not use the product during a thunderstorm, as it may cause malfunction or a risk of electric shock. When you feel unusual smell or noise or find foreign substances in the product, unplug the power cord immediately and contact a Samsung Customer Service Center. ► Keep using the product in this condition will cause fire or physical damage. Do not connect multiple power cords to one wall outlet using a multi-tap. ► This will cause abnormal heat or fire. Use only accessories provided by or approved by Samsung. Means that there is a potential risk for personal injury or material damage. Do not get the product wet or drop it in water. ► If the product gets wet, do not switch it on because you could get an electric shock. Instead, contact a Samsung Customer Service Center. Do not place the product in damp, dusty or sooty areas. ► Otherwise, these environments could lead to fire or electric shock. Do not exposure the product to the direct sunlight or heating sources. ► This may cause fire. Keep the product away from areas of high temperature difference or moisture. ► Otherwise, this will cause damage to the product or electric shock. Prevent any foreign particles or dust from entering into the product. Do not spray water on the product. Never clean the product with chemical substances such as benzene or thinner, as it may cause fire, electric shock or deteriorate the surface. 02_ Preparation YA-SBR510-ENG.indd 02 2008-04-03 오후 5:17:20 Preparation ENG Contents Safety Information ...................................... Contents .................................................. Important Safety Instructions ........................... Features of your Speaker .............................. What’s Included ......................................... Your Speaker ............................................ 02 03 04 05 05 06 Front ........................................................ Rear......................................................... Remote Control ........................................... Inserting the lithium Battery ............................. 06 06 07 07 Caution Means that there is a potential risk for personal injury or material damage. Keep the product away from the microwave oven or wireless LAN device. ► Otherwise, this will cause malfunction or noise as these devices use the same frequency band as the product. Do not cause excessive impact on the player by dropping it. Do not place heavy objects on top of the product. Product Use Connecting to the power source ..................... 08 Turning the Speaker on/off ........................... 08 Using Bluetooth .......................................... 08 Pairing the speaker....................................... Listening to music ........................................ Button Operation ......................................... Motion Detection Sensor ................................ Keep the product and accessories out of the reach of children. 09 10 10 10 To set the alpha wave mode .......................... 11 To set the sound mode ................................ 11 Using the speaker with an external device.......... 11 Do not disassemble, repair or modify this product on your own. Do not hold on the power cord to pull it out. ► Damaged cord may cause fire or electric shock. Using the Line-in cable .................................. 11 Using the Optical cable (not supplied) ................ 12 Using the USB cable .................................... 12 Appendix Troubleshooting ......................................... 13 Wireless Communications Specification............... 14 Product Specifications ................................. 14 Do not plug or unplug the power cord with wet hands. ► This may cause fire. Preparation _03 YA-SBR510-ENG.indd 03 2008-04-03 오후 5:17:45 Bluetooth Speaker Important Safety Instructions This manual describes how to properly use your speaker. So read it carefully to prevent a risk of damage to the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSID EREFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Warning To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.” Caution Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachment/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 04_ Preparation YA-SBR510-ENG.indd 04 2008-04-03 오후 5:17:46 What’s Included Hyper 3-channel Surround Speaker Your new speaker comes with these accessories. If you’re missing any of these items, contact Samsung Customer Service. ENG Features of your Speaker Your Bluetooth speaker adopts the Hyper-Directional 3 Channel Surround Imaging technology of Euphony to provide rich and vivid sound effect that is optimized to music and movie. Auto Seamless Playback with Bluetooth Speaker Remote Control / Lithium battery (CR2032) AC Power Adaptor AC Cord USB Cable Line-in Cable The Speaker automatically turns on when the motion detection sensor detects you holding an already paired Bluetooth device(MP3 Player, Mobile phone). And you can listen to music without missing a beat. Alpha ( ) wave light Blue LED light moves to the sound rhythm in various speeds and the dynamic LED radiates alpha waves like as candlelight to make feel comfortable and at ease psychologically. Slim and Stylish Look Your speaker feels soft and elegant in a slim shape. ▶ The accessories in your box may look slightly different than these. ▶ The optical cable is unbundled. Preparation _05 YA-SBR510-ENG.indd 05 2008-04-03 오후 5:17:47 Bluetooth Speaker Your Speaker Front These buttons are ‘Touch Sensitive’ buttons. Power LED Power button External device connection LED Sound Mode indicator Alpha wave light Volume Control button ※ Using the Touch Button Motion Detection sensor Tap on the touch button with your fingertip. ● Do not use force when touching the touch button, as it may cause damage to the button. ● To avoid damage to the touch button, do not use any object other than your fingers to operate it. ● Do not tap on the touch button if your fingers are not clean. ● Do not tap on the touch button with gloves on. ● The touch button may not function if you use a fingernail or other instruments such as a ballpoint pen. Rear USB connection port DC Power jack Optical jack AUX jack 06_ Preparation YA-SBR510-ENG.indd 06 2008-04-03 오후 5:17:47 ① ② ③ ENG Remote Control ① Power button Press to turn on or off the speaker ② Select button Changes the external device connection mode to AUX, OPTICAL, USB and Bluetooth in sequence. ④ ③ Alpha wave button Turn on or off the alpha wave light. ⑤ ④ Previous/Next button (in Bluetooth mode) ⑥ ⑤ Play / Pause button Press to play or pause music ⑥ Volume Control button Press to adjust the volume ⑦ Mute button Press to mute the sound ⑧ Sound Mode Selection button Press to select a 3 channel sound mode ⑧ ⑦ ▶ Press to move to the previous track. ▶ Press and hold quickly scan tracks. ▶ Press to move to the next track. ▶ Press and hold quickly scan tracks. 참고 Notes ◆ The [ Inserting the lithium Battery 1. Take the hole of the battery holder and pull out in the arrow direction. Caution ] button works only in Bluetooth mode. ◆ Some models do not support the quick scan function of the ] button. 2. Insert the lithium battery. ▶ Make sure that the plus (+) polarity of the battery faces up. Keep the lithium battery out of the reach of children or discard it. 3. Close the battery holder. ▶ Insert the battery to the end until you hear a click. 참고 Notes ◆ Remove the lithium battery when you do not use the remote control for an extended time. Preparation _07 YA-SBR510-ENG.indd 07 2008-04-03 오후 5:17:52 Bluetooth Speaker Connecting to the power source Using Bluetooth What is Bluetooth? Bluetooth is a new technology that enables Bluetooth-compliant mobile phones and external devices to easily interconnect with each other using a short wireless connection. ① ▶ This Bluetooth device may cause noise or malfunction, depending on the use conditions. - When a part of the body is in contact with the receiving/ transmitting system of the speaker or external device. - Interference from walls, corners or office partitioning. - Electrical interference from same frequency-band devices such as medical equipment, microwave ovens and wireless LAN. ③ ② AC Power Adaptor AC Cord ① Connect the AC Power adaptor to the DC Power jack on the rear of the speaker. ② Connect the AC cord into the hole of the AC Power adaptor until it fits in. ③ Connect the AC cord to the wall socket. Caution Use only the provided AC Power adaptor. Use of uncertified adaptors may cause malfunction or damage to the product. ▶ When pairing the Bluetooth device with the speaker, make it as short a distance as possible. 참고 Notes ◆ The Bluetooth features of the speaker are optimised with Samsung products. If used with third party products, some of the Bluetooth features may not work properly. Turning the Speaker on/off ▶ If you want to turn on the speaker, press the [ on the speaker or the remote control. ▶ The further the distance between the speaker and an MP3 player or hands free mobile phone, the lower the quality will be. If the distance exceeds a certain range, the wireless networking is disconnected. ] button 䯼 The power LED turns blue. 䯼 When the speaker turns on, the last used external device mode will be selected. ▶ If you want to turn off the speaker, press the [ on the speaker or the remote control. Caution ] button Please turn the volume down when you turn on the Speaker. Sudden loud sound may cause you much surprise and damage to your ears 08_ Product Use YA-SBR510-ENG.indd 08 2008-04-03 오후 5:17:54 Pairing the speaker ENG Using Bluetooth (continued) You must pair the speaker with external devices you use before you can connect it Before you start! ▶ When pairing the speaker to another Bluetooth device, we recommend keeping a distance of less than 1 meter(3 feet) between the two devices. 1 With the speaker powered-off, press and hold the [ ] button on the speaker or the remote control for 5 more than seconds. ● ● The Bluetooth connection LED blinks and the speaker enters the pairing mode. The pairing standby status lasts about 3 minutes. After 3 minutes, you should turn off and restart the speaker. 2 Select the Bluetooth menu on the Bluetooth device. 3 Search for Bluetooth devices available on the device you are using and selectfrom the search results. ● ● When selecting a device to connect, select so that you can listen to music from the speaker. For more information, refer to the user manual for the applicable device. 4 If the Pin code input window appears, enter <0000>. ● The pairing of the speaker is completed. 참고 Notes ◆ You only need to pair it once. ◆ Check the pin code of a Bluetooth audio dongle if you use it to connect this product to another device. If the pin code is other than <0000>, the connection will not be made. ◆ You can check the Bluetooth mode from the Bluetooth connection LED. Bluetooth Status LED Indicator Pairing Standby Blinking Connected Turned On Product Use _09 YA-SBR510-ENG.indd 09 2008-04-03 오후 5:17:55 Bluetooth Speaker Listening to music Motion Detection Sensor Before you start! Before you start! Check if the speaker is turned on. ▶ Check if the speaker is connected to a Bluetooth device. ▶ Check if the speaker is connected to the power source. Check if the speaker is paired with the Bluetooth device. ▶ Make sure the extenernal connection mode is set to Bluetooth mode. ▶ ▶ 1 Press the [ ] button to set the Bluetooth mode. ● The Bluetooth connection LED turns on. 2 Play a music file on the connected Bluetooth device. Or Press the [ ● ● ] button on the remote control. You can listen to music through the speaker. During music playback, press the [ ] button on the remote control to pause the playback and press the [ ] button again to play. Button Operation ▶ Volume Adjustment: Use the [-, + ] button on the speaker or the remote control to adjust the volume. ▶ Mute function: Press the [ ]button on the remote control. ▶ Previous / Next Track: Press the [ / ] button. ▶ Reverse / Forward Search: Press and hold the [ / ] button on the remote control during music playback. 1 If the Motion detection sensor detects human body in sleep mode, it will turn on the speaker so you can enjoy the music from the Bluetooth device (using earphones), now through the speaker. ▶ Sleep mode If no human motion is detected for 5 minutes during no playback in power connection condition. ● In sleep mode, only the power LED turns on. ● 참고 Notes ◆ The Motion detection sensor operates within the effective range of about 3 m. ◆ The music may not be played through the speaker, depending on the Bluetooth device. 참고 Notes ◆ In Bluetooth connection mode, the Bluetooth connection can be set off if the interval between the speaker and the Bluetooth device exceeds a certain distance. If the distance is returned to the effective range or you restart the speaker, the Bluetooth connection can be restored. ◆ If the speaker has been paired with the Bluetooth device, you can press the [ ] button to automatically restore the Bluetooth connection even in case of disconnection. ◆ If you connect the speaker to other external device in Bluetooth mode, the current Bluetooth connection is terminated and the speaker will be connected to that external device. 10_ Product Use YA-SBR510-ENG.indd 10 2008-04-03 오후 5:17:55 Using the speaker with an external device The blue alpha wave light on the front of the speaker motions rhythmically according to the music speed, volume, section and so on to make you feel psychologically comfortable. You can use the provided cable to connect to a Bluetooth noncompliant device and enjoy music through the speaker. 1 During music playback, press the [ ] button on the remote control. ● ● ENG To set the alpha wave mode Using the Line-in cable You can use the Line-in cable to listen to music through the speaker from an external device. (ex: MP3 player). The alpha wave light on the front of the speaker turns on. To turn off the alpha wave mode, press the [ ] button on the remote control again. To set the sound mode Your speaker supports 3 channel surround sound system so that you can enjoy high quality music. 1 During music playback, press the [ Line-in Cable ]button on the remote control. ● The sound mode LED turns on. Color of the sound mode LED Description Blue: Surround Mode Uses Euphony’s Hyper-Directional 3 channel Surround Imaging technology to provide an optimized surround sound system to movie. White: Hi-Fi Mode Uses Euphony’s Sound Optimized System to provide an optimized surround sound system to music. 1 Use the Line-in cable to connect the output port (or Audio-out port) of the external music player to the AUX jack of the speaker. ● When connected, the external device connection mode will switch to [AUX]. 2 Press the Play button on the external music player. 참고 Notes ● You can listen to music from the speaker. ◆ What is the alpha ( ) wave? The alpha wave is one of brain waves that emits while a person feels psychologically confortable and at ease. ◆ 참고 Notes ◆ You can use the [ ] button on the remote control to switch the external device connection mode. ◆ High level volume from the connected external device may ◆ Press and hold [-] and [+] buttons on the speaker together to change the Sound mode. cause poor sound quality. Turn the volume of the external device down. Product Use _11 YA-SBR510-ENG.indd 11 2008-04-03 오후 5:17:56 Bluetooth Speaker Using the Optical cable (not supplied) Using the USB cable You can connect the speaker to devices with the Optical-out port such as a DVD player or home theater system. You can use the USB cable to listen to music through the speaker from the PC. USB Cable Optical Cable (not supplied) 1 Use the optical cable to connect the optical-out port of the external music player to the optical jack of the speaker. 2 Press the Play button on the external music 1 Use the USB cable to connect the USB port ( ● player. ● ● The external device connection mode will switch to [OPTICAL]. You can now listen to music from the speaker. of the PC to the USB connection port of the speaker. When connected, the external device connection mode will switch to [USB]. 2 Play music on the PC. ● You can now listen to music from the speaker. 참고 Notes ◆ The music may not be played through the speaker, Caution This can be done only if the digital output of the external audio device is set to PCM mode. No other mode is supported. depending to the PC application program. Caution If you disconnect the USB cable, the playback will be stopped. To resume playing the music, exit the PC application program and restart it. 12_ Product Use YA-SBR510-ENG.indd 12 2008-04-03 오후 5:17:57 ENG Troubleshooting 䯼 If you have a problem with your speaker, check for a solution in this list. If the problem persists, contact Samsung Customer Service. Problem Power will not turn on. Solution 䯼 Check if the AC Power adaptor and the AC cord are properly connected. 䯼 Unplug the AC cord and connect it again. 䯼 Check if the AC Power adaptor and the AC cord are properly connected. Buttons do not work. 䯼 The buttons on the speaker are the touch sensor system. The touch button may not function if you use your fingernail or an instrument such as a ballpoint pen. 䯼 Unplug the AC cord and connect it again. 䯼 Check if the current external device is playing music. Music is not playing. 䯼 Check if you speaker is set to the right external device connection mode (AUX, OPTICAL, USB, Bluetooth). 䯼 Check if you select MUTE on the remote control. 䯼 Check if the speaker is paired with the Bluetooth device you use. Bluetooth connections could not be made. 䯼 The Bluetooth connection can be set off if you turn the speaker or Bluetooth device off and on. In this case, try to connect again. 䯼 In Bluetooth connection mode, the Bluetooth connection can be set off if the interval between the speaker and the Bluetooth device exceeds a certain distance. If the distance is reduced to the effective range or you restart the speaker, the Bluetooth connection will be restored. 䯼 Check if the Line-in cable, the optical cable or the USB cable is properly connected. The remote control does not 䯼 Try to operate it in a short distance to the speaker. operate. 䯼 Replace the lithium battery. The sound is not output suddenly in playback for an extended time. 䯼 Your speaker has the auto mute function to protect from overheat as the internal temperature of the speaker increases in case of an extended time of playback in a high ambient temperature. Turn off the speaker and restart it in a minute. Product Appendix Use _13 YA-SBR510-ENG.indd 13 2008-04-03 오후 5:17:57 Bluetooth Speaker Wireless Communications Specification Emission Type F1D RF Power 0.1mW/CH Transmit Frequency 2402MHz ~ 2480MHz Product Specifications Model Name YA-SBR510 Input(100-240V, 50-60HZ, 1.7A ) Power Source Output(DC 19V, 3.6A) Receive Frequency 2402MHz ~ 2480MHz Bluetooth QD ID B013205 No. of Channels 79 channels Temperature -10℃~+50℃ Bluetooth Specification Bluetooth 2.0 Modulation System GFSK Profiles supported A2DP , AVRCP Communication Mode Effective Range Max. 10m (33 feet) Duplex Operation Speaker Output 30W(10W/CH), Max. 45W(15W/CH) Humidity 0~95% Audio Input AUX, OPTICAL. USB, Bluetooth Dimensions 157 X 60 X 45 inches (400X154X116 mm) Weight 4.2lb (1.9kg ) The content of this user manual is subject to change for further improvement without prior notice. 14_ Appendix YA-SBR510-ENG.indd 14 2008-04-03 오후 5:17:58 ENG Declaration of Conformity For the following product: YA-SBR510 / Bluetooth Speaker Manufactured at: 1. Eastern Mastec Corp. 308-12, Osanri Jorieup, Paju-Shi, Kyoungkee-Do, South Korea (Factory name, address) We hereby declare, that the product above is in compliance with the essential requirements of the R&TTE Directive (1995/5/EC) by application of: EN 60065:2002 EN 55020:2002+A1:2003+A2:2005 EN 55022:1998+A1:2000+A2:2003 EN 55024:1998+A1:2001+A2:2003 EN 61000-3-2:2000 EN 61000-3-3:1995+A1:2001 EN 300 328-1 v1.7.1(2006-10) EN 301 489-1 v1.6.1(2005-09) EN 301 489-17 v1.2.1(2002-08) Technical documentation kept at Samsung Electronics Co., Ltd. in Korea. Manufacturer Representative in the EU: Youn Doo Hyun / S. Engineer Yong Sang Park / S. Manager Samsung Electronics Co., Ltd. 416,Maetan3-Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, Korea April 20, 2008 (Place and date of issue) Samsung Electronics Euro QA Lab. Blackbushe Business Park, Saxony Way, Yateley, Hampshire, GU46 6GG, United Kingdom April 20, 2008 (Name and signature of authorized person) Appendix _15 YA-SBR510-ENG.indd 15 2008-04-03 오후 5:17:58 Bluetooth Speaker SAFETY INFORMATION FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity We, Samsung Electronics Co.,Ltd., declares under its sole responsibility that the product, Trade name Samsung & Model name YA-SBR510, has been tested according to the part 15 of the FCC Rules. Party responsible for Product Compliance Samsung Electronics America QA Lab. 18600 Broadwick Street, Rancho Dominguez, CA 90220 16_ Appendix YA-SBR510-ENG.indd 16 2008-04-03 오후 5:17:59 ENG EUROPE ONLY This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Este produto está homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resolução 242/2000, e atende aos requisitos técnicos aplicados. Para maiores informações, consulte o site da ANATEL – www.anatel.gov.br Se tiver qualquer pergunta ou comentário relacionado aos produtos Samsung, favor entrar em contato com o Centro de Atendimento SAMSUNG. Samsung Eletrônica da Amazônia Ltda. 0800-124-421 www. samsung.com/br Appendix _17 YA-SBR510-ENG.indd 17 2008-04-03 오후 5:17:59 YA-SBR510-ENG.indd 18 2008-04-03 오후 5:18:00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:04:03 17:40:31+09:00 Create Date : 2008:04:03 17:17:45+09:00 Metadata Date : 2008:04:03 17:40:31+09:00 Format : application/pdf Title : YA-SBR510-ENG.indd Creator : MyHome Document ID : uuid:15ac27f0-ef01-404d-9cc2-5e2c2121e36c Instance ID : uuid:70a3a9ae-99db-490e-8ff0-c351d27d575e Page Count : 18 Author : MyHomeEXIF Metadata provided by EXIF.tools