Samsung Z107Eng_Vodafone SGH Z107 20041125160850968 O2 Eng Rev.1.1

• Contents
  • Important Safety Precautions
  • Unpacking
  • . Standard / Extended Battery
  • . Car Charger
  • . Car Cradle
  • . Stylish Handsfree Car Kit
  • . PC Data Link Kit
    • Your Phone
      • Phone Layout
      • Display
      • External Light
    • Getting Started
      • Inserting/Removing the SIM Card
  • . Keep SIM cards out of the reach of small children.
  • . The SIM card and its Phonebook can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.
  • . When installing the SIM card, always make sure that the phone is switched off before you remove the battery.
    • 1. If necessary, remove the battery by referring to page 15.
  • 2. Insert and slide the SIM card under the two tabs, ensuring that the notched corner is at the top left and the gold Phonebook of the card face down into the phone.
    • Installing/Removing/Charging the Battery
      • 1. Insert the teeth on the bottom of the battery into the corresponding slots on the phone.
  • 2. Press the battery against the back of the phone until it clicks into place.
    • 1. If the phone is on, switch it off first by pressing and holding the key until the power-off animation is displayed.
  • 2. To remove the battery, press and hold the catch above the battery. Lift the battery away from the phone.
    • 1. Plug the travel charger connector into the bottom of the phone. Check that the arrow on the connector is facing up, as is the phone.
  • 2. Plug the charger into a standard AC wall outlet.
  • 3. When charging is finished, unplug the charger from the power outlet and from the phone by pressing the grey buttons on both sides of the connector and pulling the connector out.
    • 1. Plug the travel charger connector into the bottom of the battery charger.
  • 2. Insert the teeth on the bottom of the battery into the slot on the battery charger and press the battery until it clicks into place.
  • 3. Plug the travel charger into a standard AC wall outlet.
  • 4. Ensure that the charger has been disconnected either from the charger or the wall outlet before removing the battery. To remove the battery, push and hold the catch on the charger and lift the battery away.
    • . An empty battery icon flashes ().
    • . You hear a warning tone.
    • . A message is briefly shown on the display. After 5 minutes, the message is again briefly shown. The message will appear one last time just before the phone automatically switches off.
      • Switching the Phone On or Off
        • 1. Open the phone.
  • 2. Press and hold the key until the phone switches on.
  • 3. If the phone asks for a PIN, enter the PIN code and press the Confirm soft key. For further details, see page 122.
  • 4. To switch the phone off, press and hold the key until the power-off animation displays.
    • Selecting Functions and Options
      • 1. Press the appropriate soft key.
  • 2.
    • Switching Applications
    • Call Functions
      • Making a Call
        • 1. Press and hold down the 0 key for the international prefix. The + character appears.
  • 2. Enter the country code, area code, and phone number and press the key.
    • 1. In idle mode, press the key.
  • 2. Press the Left or Right scroll key to scroll to the desired type of call: all, dialled calls, missed calls, or received calls.
  • 3. Use the Up and Down scroll keys to scroll through the list until the desired number highlights.
  • 4. To dial the number, press the key.
    • 1. Find the number you want to dial.
  • 2. To dial the number, press the key.
    • 1. Open the folder. The pop-up window shows that you have missed calls.
  • 2. If there is more than one number, select the number you want to phone back and press the key.
    • 1. In idle mode, enter the phone number of the business, such as a bank’s teleservice number.
  • 2. Press and hold the key to insert a pause.
  • 3. Enter the number that needs to follow the pause, such as your account number.
  • 4. Repeat steps 2 and 3 to add more pauses and numbers, if necessary.
  • 5. Press the key to dial.
  • 6. When prompted, press the key to send the DTMF (Dual Tone Multi-frequency) tones of the number that follows the pause.
  • 7. Repeat Step 6, as you are prompted.
    • Ending a Call
    • Answering a Call
      • 1. To answer a call, open the handset. If it is already open, press the key, the OK key, or the Accept soft key.
  • 2. End the call by closing the handset or pressing the key.
    • Rejecting a Call
    • Adjusting the Volume
    • Accessing Options During a Call
      • 1. Press the Options soft key.
  • 2. Select New call and press the OK key.
  • 3. Enter the phone number you want to dial and press the key, Call soft key, or OK key to make the second call.
    • 1. Put the current call on hold by pressing the Hold soft key.
  • 2. Make the second call in the normal way.
    • 1. Press the Accept soft key.
  • 2. In the select box, select Accept to answer the incoming call. The first call is automatically put on hold.
  • 3. To switch between the two calls, press the SWAP soft key.
    • 1. Call the first participant in the normal way.
  • 2. Make a second call, referring to page 24.
  • 3. To join the first participant to the conference call, press the Options soft key and select Join using the Up and Down scroll keys.
  • 4. Press the OK key.
  • 5. To add a new person to the conference call, repeat steps 2 to 4, as needed.
    • 1. Press the Options soft key and select Split. Press the OK key.
  • 2. Press the Up or Down scroll key to scroll to the participant you want to split off and press the OK key.
  • 3. To return to the conference call, press the Options soft key and select Join. Press the OK key.
    • 1. Press the Options soft key and select the Drop option. Press the OK key.
  • 2. Press the Up or Down scroll key to scroll to the participant you want to remove and press the OK key.
    • 1. Press the Options soft key.
  • 2. Press the Up or Down scroll key to select Phonebook and press the OK key.
  • 3. Enter the first few letters of the name you want to find.
    • 1. Press the Options soft key.
  • 2. Press the Up or Down scroll key to select Send text msg. and press the OK key.
  • 3. Scroll to the person to whom you want to send the message and press the OK key.
  • 4. When you have finished selecting recipients, press the Options soft key and select the Write option. Then press the OK key.
  • 5. Write your message and press the Options soft key and select the Send option. Then press the OK key.
  • 6. Enter any other phone number to which you want to send the message.
  • 7. When you have finished entering the numbers, press the Options soft key and select the Send option. Then press the OK key.
    • 1. Press the Options soft key.
  • 2. Press the Up or Down scroll key to select Memo and press the OK key.
  • 3. Enter the memo. Use the Down scroll key to move to the date field and then enter the date.
  • 4. When you have finished entering the memo, press the Options soft key and select the Save option or press the OK key.
    • 1. Enter the number(s).
  • 2. Press the Options soft key.
  • 3. Press the Up or Down scroll key to select Save to memo and press the OK key.
    • 1. Press the Options soft key.
  • 2. Press the Up or Down scroll key to select Mute and press the OK key.
    • 1. Press the Options soft key.
  • 2. Press the Up or Down scroll key to select Unmute and press the OK key.
    • 1. Press the Options soft key.
  • 2. Press the Up or Down scroll key to select Send DTMF and press the OK key.
  • 3. Enter the number you want to send and press the Send soft key.
    • Using Video Call Features
      • 1. In idle mode, enter a phone number to dial. You can also use phone numbers in call records.
  • 2. Press the V-Call soft key.
  • 3. Use the Show me soft key to see the image of yourself as the other person sees you.
  • 4. Use the Options soft key to mute the sound and/or disengage the Camera. You can choose the functions you want to discontinue: Voice, Camera(Video), Voice-Video all, or Keytone.
    • . See the other person only
    • . See yourself only
    • . See the other person in the main frame and yourself in the sub-frame
    • . See yourself in the main frame and the other person in the sub-frame
      • Using the Headset
      • Entering Text
    • . T9 mode
    • . ABC mode
    • . Number mode
    • . Symbol mode
      • Changing the Text Input Mode
      • Using T9 Mode
        • 1. Start entering the word by pressing the keys 2 to 9. Press each key only once for each letter.
  • 2. Enter the whole word before editing or deleting any keystrokes.
  • 3. If the word is correct, start entering the next word. Otherwise, press the 0 key to display alternative word choices for the keys that you pressed.
  • 4. Put a space between words by pressing the key.
  • 5. Continue entering any other words in T9 mode.
    • 1. Press the Spell soft key.
  • 2. Enter the word you want to add using ABC mode (see page 34) and press the Add soft key.
  • 3. Continue entering other words in T9 mode.
    • . Initial Capital ()
    • . Capital Lock ()
    • . Lower Case ()
      • Using ABC Mode
    • . Initial Capital ()
    • . Capital Lock ()
    • . Lower Case ()
      • Using Number Mode
      • Using Symbol Mode
      • Using Menu Functions
        • Accessing a Menu Function by Scrolling
          • 1. In idle mode, press the OK key to access the menu.
  • 2. Scroll using the scroll keys to reach the required application menu. Press the OK key to enter the menu.
  • 3. If the menu contains sub-menus, you can access them by scrolling using the Up and Down scroll keys and pressing the Select soft key.
  • 4.
    • 1. When the idle screen is displayed, press the OK key to access the menu.
  • 2. Scroll through the menus by pressing the scroll keys until you reach the Settings menu. To access the Settings menu, press the OK key.
  • 3. To access the Phone menu, press the Select soft key or OK key.
  • 4. Scroll through the sub-menus by pressing the Up or Down scroll key, then use either the Select soft key or the OK key to choose your language.
  • 5. Press the OK key when Screen Text is highlighted.
  • 6. Scroll through the list of languages by pressing the Up or Down scroll key until the appropriate one is highlighted. Press the Select soft key or the OK key.
  • 7. Press the Save soft key to save the setting in the Language screen. Otherwise press the Back soft key.
  • 8. Press the key to exit the menu.
    • Shortcuts to Menu Functions
      • 1. Press the OK key.
  • 2. Press for Settings.
  • 3. Press for Phone.
  • 4. Press for Language.
    • List of Menu Functions
    • . number assigned to each option
    • . page on which you can find a description of each feature
• 1. Applications (see page 42)
• 2. Call log (see page 53)
• 3. Phonebook (see page 56)
• 4. Internet (see page 63)
• 5. Messages (see page 67)
• 6. My Items (see page 83)
• 7. Organiser (see page 87)
• 8. Profiles (see page 92)
• 9. Settings (see page 94)
• Applications
  • 1. Press the Left or Right scroll key to select an application folder, Basic, Alarm, or Games & more.
  • 2. Press the Up or Down scroll key to select an application.
  • 3. Press the OK key to start the application.
  • SIM Applications
  • Camera/Video recorder
    • 1. To turn on your camera, press the Left soft key in idle mode.
    • 2. Point the camera at the subject, rotating the camera if necessary.
    • 3. Press the OK key. Or, press the Options soft key and press the OK key when Take picture is highlighted to take a picture.
    • 4. The photo is saved automatically and then
    • . As multimedia msg.: allows you to send the picture as a multimedia message. For further details about sending multimedia messages, see page 68.
    • . As email: allows you to send the picture as an e-mail.
    • . Via file sender: allows you to send a message with the picture attached.
    • . Automatic: when you take a picture, the flash will light.
    • . Manual: to switch the camera flash on or off, you have to press the Up key in the Navigation key in capture mode. The flash goes on. When you have taken a picture the flash goes out.
      • 1. To turn on your camera, press the Left soft key.
      • 2. When you are in camera mode, press the Options soft key and then select Record video.
      • 3. Press the Options soft key. Select Record by pressing the Up or Down scroll key and press the OK key.
      • 4. Your phone starts recording. Maximum recording time is 30 seconds.
      • 5. While recording video:
      • 6. When the recording time expires, the phone automatically saves the video in the Videos folder in My Items; see page 85.
    • . As multimedia msg.: allows you to send the video as part of a multimedia message. For further details about sending multimedia messages, see page 68.
    • . As email: allows you to send the video as part of an e-mail.
    • . Via file messenger: allows you to send a message with the video attached.
  • Media Player
    • . you view a media file in the My Items menu.
    • . you want to play a sound file or a video in the browser.
      • 1. On the Media Player screen, press the Options soft key.
      • 2. Scroll to Open play list and press the OK key.
      • 3. Press the Up or Down scroll key to select the file you want to play and press the OK key or the Select soft key.
      • 4.
      • 1. On the Media Player screen, press the Options soft key.
      • 2. Press the Up or Down scroll key to scroll to Player settings and press the OK key.
      • 3. Press the Up or Down scroll key to scroll through the options. You can select the desired setting using the Left and Right scroll keys.
      • . Repeat: allows you to set Media Player to repeat either all files or only a single file. Selecting None means that the file is played just once.
      • . Play order: allows you to set the order to Random or Normal.
      • . Volume: allows you to adjust the volume level. This option is available only when you have already opened a file.
      • . Hide controller: hides the Media Player control bar when you place a check mark next to this option by pressing the OK key. If you want the control bar to show again, remove the check mark by pressing the OK key.
  • Voice Memo
  • World Clock
    • 1. Select the city corresponding to your time zone by pressing the Left or Right scroll key.
    • 2. Press the Down key and select another city and its corresponding time zone by pressing the Left or Right scroll key.
  • Calculator
    • 1. Enter the first figure using the number keys.
    • 2. Press the appropriate scroll key to select your calculation.
    • 3. Enter the second figure.
    • 4. Press the OK key to get the result.
  • Converter
    • 1. Select the units to be converted by pressing the Left or Right scroll key.
    • 2. When you enter the value to be converted, you can see the corresponding value of each unit.
    • 1. Select the base currency by pressing the Left or Right scroll key.
    • 2. Scroll to another currency by pressing the Up or Down scroll key and edit the rates.
    • 3. Press the Options soft key and select the Save option to save the rate.
  • Alarm
    • 1. Select the type of alarm from among Once alarm, Daily alarm, or Wake up alarm.
    • 2. Set On by pressing the Left or Right scroll key.
    • 3. Move to the time field by pressing the Down scroll key and enter the time for the alarm to sound.
    • 4. (Only for the Wake up alarm) Move to the repeat field by pressing the Down scroll key and select the repetition type from among None, Every day, Except weekend, or Except Sunday.
    • 5. Move to the alert tone field by pressing the Down scroll key. After pressing the OK key, you can select an alarm melody
    • 6. Press the Save soft key to save it.
    • 1. Select the type of alarm from among Once alarm, Daily alarm, or Wake up alarm.
    • 2. Set Off by pressing the Left or Right scroll key.
    • . Press the OK soft key or key.
    • . When the Wake up alarm tone sounds, press the Snooze soft key to stop the alarm for five minutes, after which it will resume. You can do this a maximum of five times.
  • Games & More
• Call Log
  • . missed, dialled, and received calls, or all calls
  • . cost of your calls
  • . length of time of calls you have made or received
  • . You can access the all calls list by pressing the key in idle mode.
  • . When you are not calling, but using a headset with the phone is closed, you can see the call log on the sub LCD by pressing the headset button. You can also scroll through the log by pressing the volume keys on the left side of the phone.
  • Missed, Dialled, Received, or All Calls (Menu 2-1~4)
    • 1. From the Call log screen, press the Left or Right scroll key to scroll to the type of calls you want to view.
    • 2. Press the Up or Down scroll key to select the call you want to view.
    • 3.
  • Data Calls (Menu 2-5)
    • . sending and receiving multimedia messages
    • . sending and receiving e-mail
    • . browsing WAP pages
    • . downloading MIDlets (Java applications that run on mobile phones)
    • . using your phone as a modem.
  • Call Costs (Menu 2-6)
    • 1. The Call Costs screen shows you the total cost, last call costs, and cost limit.
    • 2. While viewing the call costs, press the Options soft key to use the following options:
    • . Reset call costs: allows you to reset the cost counter; first, you must enter your PIN2 code (see page 112) and then press the Confirm soft key.
    • . Edit cost limit: allows you to enter the maximum cost that you authorise for your calls; first, you must enter your PIN2 code (see page 112) and then press the Confirm soft key.
    • . Setup currency: allows you to set the currency of the call cost; first, you must enter your PIN2 code (see page 112) and then press the Confirm soft key.
  • Call Times (Menu 2-7)
    • 1. Press the Up or Down scroll key to scroll through the call timer for each call type.
    • . Total dialled: total time of the voice calls you have dialled.
    • . Total received: total time of the voice calls you have received.
    • . Total dialled: total time of the video calls you have dialled.
    • . Total received: total time of the video calls you have received.
      • 2. While viewing the call time, press the Options soft key to use the following options:
    • . Reset: resets the call timer.
    • . Reset all: resets all of the call timers.
• Phonebook
  • Search Contact (Menu 3-1)
    • 1. If necessary, press the Up or Down scroll key to find the contact you want.
    • 2.
  • New (Menu 3-2)
    • 1. Press the Up or Down scroll key to scroll through the input boxes and enter the corresponding information you want to save:
    • . First Name/Last Name: enter the first and the last name of the contact. For further details about entering characters, see page 32.
    • . Mobile()/Home()/Work()/ Fax()/Etc.(): enter the number you want to add in the appropriate input box.
    • . Email: enter the person’s e-mail address.
    • . Group: press the OK key to add the person to a group.
    • . Homepage: enter the URL address of the person’s home page.
    • . Memo: enter information you need to remember about the person.
      • 2. When you have entered the information you want, press the Options soft key and select the Save option.
      • 1. Press the Up or Down scroll key to scroll through the input boxes and enter the corresponding information you want to save:
    • . Name: enter the name of the contact. For further details about entering characters, see page 32.
    • . Phone number/Additional phone number: enter the phone number you want to add.
    • . Email: enter the person’s e-mail address.
    • . Group: press the OK key to add the person to a group.
      • 2. Press the Down scroll key to move to the location number input box and modify a number, if you want.
      • 3. Press the Options soft key and select Save option.
      • 1. Enter the name of the contact.
      • 2. Press the Down scroll key to move to the Phone number input box and enter a number.
      • 3. Press the Down scroll key to move to the location number input box and modify a number, if you want.
      • 4. Press the Save soft key.
      • 1. In idle mode, enter the number to be stored.
      • 2. Press the Options soft key and press the OK key when Save contact to highlights.
      • 3. Press the Up or Down scroll key to scroll through the input boxes and enter the corresponding information you want to save. T...
    • . Picture: allows you to select an image to be displayed when a call or message comes in from the contact. Press the OK key. You can select from icon, animation, and photo, and then choose a file from My Items.
    • . Ring tone: allows you to set a sound to be played when a call comes in from the contact. Press the OK key and select an audio file from My Items.
    • . Msg. alert tone: allows you to select a sound to be played when a message comes in from the contact. Press the OK key and select a sound file from My Items.
  • Viewing Contact Information
  • Groups (Menu 3-3)
    • 1. When the Group list displays, if necessary press the Up or Down scroll key to scroll through the Group list to the Group you want.
    • 2. Press the Options soft key from the Group list to access the following options:
    • . View members: views the Phonebook list saved for this group.
    • . Add group: you can enter a group name for a new group. You can see the new group name in the Group list.
    • . Rename group: allows you to change the group name.
    • . Delete group: deletes the selected group.
    • . Delete all groups: deletes all of the groups.
      • 1. When you select a group, you can see the list of names enrolled in the group.
      • 2. If necessary press the Up or Down scroll key to scroll through the name list.
      • 3. Press the Options soft key to access the following options:
    • . Details: allows you to view detailed information about the selected member.
    • . Edit group: allows you to change members in the group. Mark and unmark names you want to add or delete using the OK key and press the Save soft key.
  • Speed Dial (Menu 3-4)
    • 1. When the Speed Dial list displays, highlight the Speed dial number you want to edit by pressing the scroll key.
    • 2. Press the Options soft key to access the following options:
    • . Assign: allows you to add a speed dial number at an empty slot.
    • . Details: allows you to view detailed information about the selected speed dial entry, for example, the image and phone number of the contact.
    • . Change: allows you to change one entry into another.
    • . Remove: allows you to clear the selected speed dial number.
  • My Name Card (Menu 3-5)
  • Copy All to Phone (Menu 3-6)
  • Memory Status (Menu 3-7)
• Internet
  • Launching the Browser
    • 1. Access the Internet menu.
    • 2. A connection is established with your service provider and the internet homepage displays.
    • 3. To scroll through the screen, use the scroll keys.
  • Closing the Browser
  • Using the Browser
  • Entering Text in the Browser
  • Using the Browser Menus
  • Using Bookmarks
    • 1. Go to the page that you want to bookmark and press the Options soft key.
    • 2. Scroll to Add bookmark and press the OK key.
    • 3. Enter the title for the bookmark and press the Save soft key.
    • 1. Press the Links soft key on the startup screen of the Internet menu.
    • 2. Scroll to a bookmark item and press the OK key.
  • Setting up the Browser
    • 1. Press the Options soft key on any web page.
    • 2. Scroll to Settings and press the OK key.
    • 3. The access points displays.
    • 4. Scroll to the access point that you want to use and press the OK key to change the current access point.
• Messages
  • Write (Menu 5-1)
    • 1. On the Write screen, press the Select soft key when Short msg. highlights.
    • 2. Write your message.
    • 3. If you want to use the message options while entering your message, press the Options soft key. Select one of the following options:
    • . Use text template: allows you to use one of the preset message templates stored in the Text templates menu; for further details, see page 77.
    • . Input language: selects the language to be used.
    • . Save to Drafts: saves the message as a draft. You can access it later in the Drafts menu; for further details, see page 76.
    • . Add Phonebook: allows you to add a contact to the message.
      • 4. When you finish writing the message, press the Options soft key and select the Send option.
      • 5. Enter a destination number in the To input box.
    • . Send: allows you to send the message.
    • . Contacts: allows you to search Phonebook for a number. See page 92.
    • . Save to Drafts: saves the message as a draft. You can access it later in the Drafts menu; for further details, see page 76.
    • . Send settings: allows you to change the settings for the message transmission.
      • 6. To send the message to more than one person, press the Down scroll key to move to another To input box.
      • 7. When you have finished setting the destination(s), press the Options soft key and select the Send option to send the message.
      • 1. On the Write screen, select Multimedia msg.
      • 2. Enter the subject in the Subject text field.
      • 3. To attach an image, video, or audio file, press the scroll key to move to the Picture or Video or Audio field and press the O...
      • 4. Enter your message into the Text field.
      • 5. If you want to use the message options while entering your message, press the Options soft key. Select one of the following options:
    • . Preview: shows your message as it will be displayed on the recipient’s phone. Scroll through the message by pressing the Up or Down scroll key.
    • . Input language: selects the language to be used.
    • . Use text template: allows you to use one of the preset message text templates stored in the Text templates menu; for further details, see page 77.
    • . Delete picture/video/sound/text: deletes the selected image, video, sound, or text.
    • . Save to Drafts: saves the message as a draft. You can access it later in the Drafts menu; for further details, see page 76.
    • . Add page: adds a new page.
    • . Delete page: deletes a selected page. This option is only available if more than one page has been created.
    • . Edit page: allows you to use the following options:
      • 6. When you have finished creating the message, press the Options soft key and select Send.
      • 7. Enter a destination number in the To input box.
      • 8. To send the message to more than one person, press the Down scroll key to move to another To input box.
      • 9. When you have finished setting the destination(s), press the Options soft key and select the Send option to send the message.
      • 1. On the Write screen, select File messenger and press the OK key.
      • 2. Enter the subject of your message.
      • 3. Press the Down scroll key and enter your message contents.
      • 4. Press the Down scroll key to attach a media file and press the OK key. The My Items screen displays.
      • 5. Select a media file by pressing the scroll keys and press the OK key to select it. A check mark appears next to the selected file.
      • 6. Repeat step 5 to add more files.
      • 7. When you have finished selecting the files, press the Options soft key and press the OK key when Attach highlights. You can cancel your selection by choosing Deselect all.
      • 8. If you want to use the message options while entering your message, press the Options soft key. Select one of the following options:
    • . Use text template: allows you to use one of the preset message templates stored in the Text templates menu.
    • . Delete all attached file(s): removes all attached files.
    • . Attachment(s): shows a list of attached file(s).
    • . Input language: selects the language to be used.
    • . Save to Drafts: saves the message as a draft. You can access it later in the Drafts menu.
      • 9. When you have finished writing the message, press the Options soft key and select the Send option.
      • 10. Enter a destination number in the To input box.
    • . Send: allows you to send the message.
    • . Contacts: allows you to search Phonebook for a number. See page 92.
    • . Save to Drafts: saves the message as a draft. You can access it later in the Drafts menu; for further details, see page 76.
    • . Settings: allows you to change the settings for message transmission.
      • 11. To send the message to more than one person, press the Down scroll key to move to another To input box.
      • 12. When you have finished setting the destination(s), press the Options soft key and select the Send option to send the message.
      • 1. On the Write screen, press the Select soft key when Email highlights.
      • 2. Enter the subject of your message.
      • 3. Press the Down scroll key and enter your message contents.
      • 4. Press the Down scroll key to attach a media file, if desired, and press the OK key. The My Items screen displays.
      • 5. Select a media file by pressing the scroll keys and press the OK key to select it. A check mark appears next to the selected file.
      • 6. Repeat step 5 to add more files.
      • 7. When you have finished selecting the files, press the Options soft key and press the OK key when Attach highlights. You can cancel your selection by choosing Deselect all.
      • 8. If you want to use the message options while entering your message, press the Options soft key. Select one of the following options:
    • . Use text template: allows you to use one of the preset message templates stored in the Text templates menu; for further details, see page 77.
    • . Delete all attached file(s): removes all attached files.
    • . Attachment(s): shows a list of attached file(s).
    • . Input language: selects the language to be used.
    • . Save to Drafts: saves the message as a draft. You can access it later in the Drafts menu.
      • 9. When you have finished composing your message, press the Options soft key and select the Send option to send the message.
      • 10. Enter a destination e-mail address in the To input box.
    • . Send: allows you to send the message.
    • . Contacts: allows you to search Phonebook for an e-mail address. See page 92.
    • . Save to Drafts: saves the message as a draft. You can access it later in the Drafts menu; for further details, see page 76.
    • . Send settings: allows you to change the settings for message transmission.
      • 11. To send the message to more than one person, press the Down scroll key to move to another To input box.
      • 12. When you have finished setting the destination(s), press the Options soft key and select the Send option to send the message.
  • Inbox (Menu 5-2)
    • . : Text message
    • . : Text SIM message
    • . : MMS message
    • . : MMS notification message
    • . : Voice message
    • . : Network configuration information message. For information about configuration messages, see Configuration Message on page 75.
    • Configuration Messages
  • Email Box (Menu 5-3)
    • . : E-mail
    • . : E-mail with attachment
  • Outbox (Menu 5-4)
  • Drafts (Menu 5-5)
  • Templates (Menu 5-6)
    • 1. On the Messages screen, scroll to the Templates menu and press the Select soft key. Press the Select soft key when MMS templates highlights.
    • 2. Select an MMS message template.
    • 3. Press the Options soft key to use the following options:
    • . View: views the selected MMS template.
    • . Send: send the selected MMS template as a multimedia message.
    • . Edit: allows you to edit the selected MMS template the same way you edit an MMS message. After you edit it, you can send it the same way you send an MMS message.
    • . Delete: deletes the selected MMS template.
  • Delete All (Menu 5-7)
    • 1. Scroll to a message type and place a check mark next to it by pressing the OK key.
    • 2. If necessary, repeat step 1 to select another type.
    • 3. When you have finished making selections, press the Delete soft key.
    • 4. When a confirming message appears, press the Yes soft key to delete all of the messages in the type(s).
  • Settings (Menu 5-8)
    • Send settings
    • Receive settings
      • . Auto: you receive multimedia messages automatically.
      • . Manual: you receive a notification message first. Then, if you choose, you can download the multimedia message.
      • . Restricted (only for Roaming network): If you select this method of notification, there may be a possible additional charge, depending on whether you download the message or not.
    • Network settings
    • Send settings
    • Receive settings
      • . Subject only: you receive only the subjects of e-mails. You can read the contents after downloading.
      • . Normal: you receive the full e-mail.
    • Network settings
    • Account Settings
  • Memory Status (Menu 5-9)
• My Items
  • Exploring Multimedia Files
    • . As multimedia msg.: allows you to send a multimedia message using the multimedia file. For further details about sending multimedia messages, see page 68.
    • . As email: allows you to send an e-mail using the multimedia file.
    • . Via file messenger: allows you to send a message with a multimedia file attached.
    • Viewing an Image
      • 1. Press the Up or Down scroll key to select the Images category. The image list displays.
      • 2. Press the Up or Down scroll key to select an image and press the OK key.
      • 3. The image viewer shows the selected file.
    • Creating a New Image
    • Playing a Video File
      • 1. Press the Up or Down scroll key to select Videos. The video list displays.
      • 2. Press the Up or Down scroll key to select a video file and press the OK key.
      • 3. Media Player plays the selected file.
    • Creating a Video
    • Playing a Music File
      • 1. Press the Up or Down scroll key to select Music. The music list displays.
      • 2. Press the Up or Down scroll key to select a music file and press the OK key.
      • 3. The music plays.
      • 1. Press the Up or Down scroll key to select Sounds.
      • 2. Press the Left or Right scroll key to scroll through the sub folders: Ringtones, Recordings, and Downloads.
      • 3. Press the Up or Down scroll key to select a file and press the OK key.
      • 4. The music plays.
    • Creating a Sound
• Organiser
  • Calendar (Menu 7-1)
    • . Press the Up or Down scroll key to move to the previous or next week.
    • . Press the Left or Right scroll key to move to the previous or next day.
    • . Press the volume keys to move to the previous or next month. You can also press the Left, Right, or Up scroll key when the title bar showing the month and year highlights.
    • . Press the OK key to access the selected day.
  • Today’s Events (Menu 7-2)
  • Schedule (Menu 7-3)
    • 1. Scroll through the entry fields by pressing the Up or Down scroll key. Enter information or select the settings you want.
    • . Title: enter a title for the event. See page 32 for more information about entering characters.
    • . Details: enter the event details.
    • . Start: enter the start time of the event. You can move the cursor using the Left and Right scroll keys.
    • . End: enter the end time of the event the same way as you would enter a start time.
    • . Start date: enter the start date. You can move the cursor using the Left and Right scroll keys.
    • . End date: enter the end date the same way as you would enter a start date.
    • . Location: enter information about the event location.
    • . Alarm: press the OK key to set an alarm to remind you of the event. Then set when the alarm is to alert you: enter the number ...
    • . Repeat: if you are entering a recurring event, press the OK key and select the repeat option using the Left and Right scroll keys. Then enter the date that you wish the event to cease recurring.
      • 2. When you have finished entering the event, press the Save soft key.
  • Anniversary (Menu 7-4)
    • 1. Scroll through the entry fields by pressing the Up or Down scroll key. Enter information or select the settings you want.
    • . Occasion: enter the information about the occasion. See page 32 for more information about entering characters.
    • . Date: enter the date. You can move the cursor using the Left and Right scroll keys.
    • . Alarm: press the OK key to set an alarm to remind you of the event. To set an alarm ahead of the day required, enter the desir...
    • . Repeat every year: press the OK key to mark or unmark this option.
      • 2. When you have finished entering the anniversary details, press the Save soft key.
  • Task List (Menu 7-5)
    • 1. Scroll through the entry fields by pressing the Up or Down scroll key. Enter information or select the settings you want.
    • . Task: enter the information about the occasion. See page 32 for more information about entering characters.
    • . Start date: enter the start date. You can move the cursor using the Left and Right scroll keys.
    • . Due date: enter the due date.
    • . Priority: enter the priority, choosing 1, 2 or 3. 1 is the highest priority.
      • 2. When you have finished entering the Task, press the Save soft key.
  • Memo (Menu 7-6)
    • 1. Scroll through the entry fields by pressing the Up or Down scroll key. Enter information or select the settings you want.
    • . Memo: enter the memo details.
    • . Date: enter the date.
      • 2. When you have finished entering the memo, press the Save soft key.
  • Missed Event Alarm (Menu 7-7)
• Profiles
  • Changing the Profiles
  • Customising the Profiles
    • 1. To modify a profile, scroll to the profile on the Profiles list by pressing the Up or Down scroll key, and then press the OK key. A list of profile settings opens. The available setting options vary depending on the selected profile.
    • 2. Scroll to the setting you want to change by pressing the Up or Down scroll key, and then change the setting using the Left or Right scroll keys, or the OK key.
    • 3. When you finish setting the options, press the Save soft key.
• Settings
  • Phone (Menu 9-1)
    • 1. Press the OK key in the Screen Text field.
    • 2. Press the Up or Down scroll key to select a language for the display text, e.g., menu names and warning or confirmation messages, and press the Select soft key.
    • 3. Press the Down scroll key to move to the Input T9 field and press the OK key.
    • 4. Press the Up or Down scroll key to select a language for the T9 input mode and press the Select soft key.
    • 5. Press the Save soft key.
    • 1. Press the Left or Right scroll key to check the current function assigned, and select the scroll key whose function you want to change.
    • 2. Press the Options soft key to use the following options:
  • Display (Menu 9-2)
    • 1. When Greeting message highlights in the Display menu, press the Select soft key.
    • 2. Press the C key to clear the message.
    • 3. Enter a new message.
    • 4. When you have finished entering the message, press the Save soft key.
    • 1. Select Wallpaper in the Display menu using the Up or Down scroll key, and press the Select soft key. You can also press the Wallpaper soft key from the Settings startup screen.
    • 2. Press the Up or Down scroll key to scroll to the image you want to use.
    • 3. Press the Select soft key.
  • Call (Menu 9-3)
    • 1. From Voice call, Data call, and Video call, select the type of call to be diverted by pressing the Up or Down scroll key, and then press the OK key.
    • 2. Select when the calls should be diverted by pressing the Up or Down scroll key, and then press the OK key.
    • 3. Press the Left or Right scroll key to select one of the following options:
    • 4. Press the Down scroll key and enter or change the number to which you want your calls diverted. Or, press the Phonebook soft key to select a stored number.
    • 5. Press the Up scroll key and press the Req. soft key.
    • 1. From Voice call, Data call, and Video call, select the type of call to be barred by pressing the Up or Down scroll key, and then press the OK key.
    • 2. Select which calls should be barred by pressing the Up or Down scroll key, and then press the OK key.
    • 3. Press the Left or Right scroll key to select one of the following options.
    • 4. Press the Down scroll key and enter the call barring password supplied by your service provider.
    • 5. Press the Req. soft key.
  • Changing the Barring Password
    • 1. From the barring menu screen, press the Options soft key and select the Change password option.
    • 2. Enter the current password in the Old input box.
    • 3. Press the Down scroll key and enter a new password.
    • 4. Press the Down scroll key and enter the new password again to confirm it.
    • 5. Press the Confirm soft key.
    • 1. From Voice call and Data call, select the type of call by pressing the Up or Down scroll key, and then press the OK key.
    • 2. Press the Left or Right scroll key to select one of the following options.
    • 3. Press the Req. soft key.
  • Activating a Closed User Group
    • 1. Press the OK key to put a check mark on the Use user group field.
    • 2. Press the Down scroll key to move to the Outside access field. Use the OK key to enable or disable calls to numbers other than those in the Closed User Group.
    • 3. Press the Down scroll key to move to the Group index field and select the CUG index you want to activate.
    • 4. Press the Save soft key.
  • Managing the Index List
    • 1. On the Closed User Group screen, press the Down scroll key to move to the Group index field.
    • 2. Press the OK key to see the Group index list.
    • 3. Press the Up or Down scroll key to select an index and press the Options soft key.
    • Video call (Menu 9-4)
    • Network (Menu 9-5)
    • Connections (Menu 9-6)
    • Security (Menu 9-7)
      • 1. Enter the current password and press the Confirm soft key.
      • 2. Enter a new password and press the Confirm soft key.
      • 3. Enter the new password again to confirm it and press the Confirm soft key.
      • 1. Scroll to an item and place a check mark next to it by pressing the OK key.
      • 2. If necessary, repeat step 1 to check another item.
      • 3. When you have finished making your selections, press the Save soft key.
      • 4. When a confirming message appears, enter your phone password and press the Confirm soft key to lock the content(s) selected.
      • 1. Enter the current PIN code and press the Confirm soft key.
      • 2. Enter a new PIN code and press the Confirm soft key.
      • 3. Enter the new code again to confirm it and press the Confirm soft key.
      • 1. Enter the current PIN2 code and press the Confirm soft key.
      • 2. Enter a new PIN2 code and press the Confirm soft key.
      • 3. Enter the new code again to confirm it and press the Confirm soft key.
    • Date & Time (Menu 9-8)
    • Own Number (Menu 9-9)
      • 1. Scroll to a number and press the Select soft key.
      • 2. Edit your name and number.
      • 3. Press the Save soft key to save it.
    • Memory Status (Menu 9-0)
    • Reset Settings (Menu 9-*)
      • 1. When the display asks you to enter the phone password, enter it and press the Confirm soft key.
      • 2. When you are asked to confirm your choice, press the Yes soft key.
• Solving Problems
  • Insert SIM card
  • Phone Lock
  • PIN Lock
  • PUK Lock
  • No Service
• Access Codes
  • Phone Password
  • PIN
  • PIN2
  • PUK
  • PUK2
  • Call Barring Password
• Health and Safety Information
  • SAR Certification Information
  • Precautions When Using Batteries
  • Road Safety
  • Operating Environment
  • Electronic Devices
  • Potentially Explosive Environments
  • Emergency Calls
    • 1. If the phone is not on, switch it on.
    • 2. Enter the emergency number for your present location (for example, 112 or any other official emergency number). Emergency numbers vary by location.
    • 3. Press the key.
  • Other Important Safety Information
  • Care and Maintenance
• Glossary
  • 3G (3rd Generation)
  • The collective name used to describe mobile systems able to support a wide range of Mobile Internet services, operating with greater bandwidth than lower generation phones.
  • Bearer
  • Various mechanisms the network uses to transmit voice and data.
  • Call Barring
  • Call Diverting
  • Call Holding
  • Call Waiting
  • CLI (Caller Line Identification) Services
  • GPRS (General Packet Radio Service)
  • New non-voice value-added service that allows information to be sent and received across a mobile telephone network. GPRS guaran...
  • GSM (Global System for Mobile Communication)
  • Java
  • MMS (Multimedia Message Service)
  • Multiparty Calling
  • Packet-Switched
  • PIN (Personal Identification Number)
  • PUK (PIN Unblocking Key)
  • Roaming
  • SIM (Subscriber Identification Module)
  • SMS (Short Message Service)
  • UMTS (Universal Mobile Telecommunications System)
  • Index
    • A
    • B
    • C
    • D
    • E
    • F
    • G
    • H
    • I
    • K
    • L
    • M
    • N
    • O
    • P
    • R
    • S
    • T
    • U
    • V
    • W