Samsung BP68 00380A (J61A_Asia_ENG) SP 43H3HT 20050715095151546 01Eng 1210 Book
User Manual: Samsung SP-43H3HT Samsung SP-43H3HT user manual - User Manual (ver.1.0) - ITALIAN (EUROPE)
Open the PDF directly: View PDF .
Page Count: 83
Download | |
Open PDF In Browser | View PDF |
BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 1 COLOR TELEVISION SP43H3HT Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. PICTURE IN PICTURE (PIP) TELETEXT SELF FOCUS BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 3 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the different formats as a full screen picture. B e careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty. The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for commercial use. The license does not cover any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3. English - 3 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 4 Contents ◆ FOREWORD ■ Important Warranty Information Regarding Television Format Viewing ........ 3 ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Control Panel................................................................................................. 6 Connection Panel .......................................................................................... 7 Using a Display Deck .................................................................................... 8 Inserting the Batteries in the Remote Control................................................ 8 Infrared Remote Control ................................................................................ 9 Connecting to an Aerial or Cable Television Network ................................... 10 Connecting a Satellite Receiver or Decoder.................................................. 11 Switching Your Television On and Off........................................................... 12 Placing Your Television in Standby Mode ..................................................... 12 Becoming Familiar with the Remote Control ................................................. 13 Plug & Play Feature....................................................................................... 14~15 Displaying Information ................................................................................... 15 Choosing Your Language.............................................................................. 16 Adjusting the Screen Automatically (Self Focus)........................................... 17 Deactivating the Automatic Execution of the Self Focus ............................... 18 Removing the “Self Focus” from the Display ................................................. 19 ◆ SETTING THE CHANNELS ■ ■ ■ ■ ■ ■ Storing Channels Automatically..................................................................... 20 Sorting the Stored Channels ......................................................................... 21 Storing Channels Manually............................................................................ 22~23 Skipping Unwanted Channels ....................................................................... 24 Locking the Channel...................................................................................... 25 Fine Tuning Channel Reception .................................................................... 26 ◆ USING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Using the LNA (Low Noise Amplifier) Feature............................................... 27 Viewing the Channel Scan Picture ................................................................ 28 Changing the Picture Standard ..................................................................... 29 Customizing the Picture Settings................................................................... 30 Selecting the Picture Size (4:3 Model) .......................................................... 31 Selecting the Picture Size (Wide Model) ....................................................... 32~33 Selecting the Scan Mode............................................................................... 34 Using the Digital NR (Digital Noise Reduction) Feature ................................ 35 Freezing the Current Picture ......................................................................... 35 DNIeTM (Digital Natural Image engine) ............................................... 36 Setting the Blue Screen Mode....................................................................... 37 Viewing the Picture In Picture (PIP) .............................................................. 38~39 Changing the Sound Standard ...................................................................... 40 Customizing the Sound Settings ................................................................... 41 Adjusting the Volume Automatically .............................................................. 42 Setting the Dolby Digital ................................................................................ 43~44 Setting the Dolby Pro LogicII ......................................................................... 45 Setting the External Digital Sound................................................................. 46 Setting the Melody Sound ............................................................................. 47 English - 4 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 5 Contents (continued) ◆ USING YOUR TELEVISION (continued) ■ ■ ■ ■ ■ Selecting the Sound Mode ............................................................................ Setting and Displaying the Current Time....................................................... Setting the Sleep Timer ................................................................................. Switching the Television On and Off Automatically ....................................... Viewing an External Signal Source ............................................................... 48 49 50 51 52 ◆ USING THE DVD FUNCTION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Playing a Disc................................................................................................ Using the Search and Skip Functions ........................................................... Playing a Disc (MP3/WMA) ........................................................................... Playing a Disc (MPG) .................................................................................... Playing a Disc (JPEG) ................................................................................... Using the Disc Menu ..................................................................................... Using the Title Menu...................................................................................... Displaying the Disc Information ..................................................................... Using the Zoom Function (DVD/VCD)........................................................... Changing the Camera Angle ......................................................................... Using the Bookmark Function (DVD/VCD).................................................... Repeat Play ................................................................................................... Program Play (CD) ........................................................................................ Setting up the Language for Player Menu ..................................................... Setting up the Display Options ...................................................................... Setting up the Parental Control ..................................................................... 53 54 55 56 57 58 58 59 60 60 61 62 63 64 65 66 ◆ USING THE TELETEXT FEATURE ■ ■ ■ ■ Teletext Feature ............................................................................................ Displaying the Teletext Information ............................................................... Selecting Display Options.............................................................................. Selecting a Teletext Page.............................................................................. 67 68 69 70 ◆ ADDITIONAL INFORMATION AND CONNECTIONS ■ ■ ■ ■ ■ ■ Connecting to the External Devices .............................................................. Connecting to the Audio Outputs................................................................... Connecting to the S-Video Input.................................................................... Connecting to the Digital Audio Input ............................................................ Connecting to the Component Input.............................................................. Connecting Additional Speakers ................................................................... 71 72 73 74 75 76 ◆ RECOMMENDATIONS FOR USE ■ ■ ■ Programming the Remote Control for Other Components ............................ 77~79 - VCR Remote Control Codes ....................................................................... 78 - Cable Box (CATV) Remote Control Codes ................................................. 79 - DVD Remote Control Codes ....................................................................... 79 Disc Type and Characteristics....................................................................... 80 Troubleshooting: Before Contacting Service Personnel................................ 81~82 Symbols Press ☛ Important ➢ Note English - 5 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 6 Control Panel ➢ The actual configuration on your TV may be different, depending on your model. Front of the TV Side of the TV ( a ) Place the TV in standby mode Adjust the volume ( b ) Remote control sensor ( g ) Select the channels ( c ) Standby & Timer indicator ( h ) Access to the selected option on the menu system ( d ) Switch among video input modes ( e ) Display the on-screen menu 1 ➢ (f) 2 3 (i) Switch the TV on and off 4 5 Œ Skip or search the title, chapter or track ¨ Open and close the disc tray ´ Stop the disc ˆ Disc tray ˇ Play or pause the disc ◆ You can use the CH buttons to switch on the TV when it is in standby mode depending on the model. ◆ The - VOL + and CH buttons have the same function as the ▲/▼/œ/√ buttons on the remote control. ◆ If the remote control no longer works or your have lost it, you can use controls on the panel of the TV. English - 6 . BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 7 Connection Panel ➢ The actual configuration on your TV may be different, depending on your model. Side of the TV Video Input Audio Input S-Video Input Rear of the TV g f e d b a d c ( a ) ANT IN VHF/UHF (75Ω) ( e ) DIGITAL AUDIO INPUT ( b ) AV OUTPUT (VIDEO / L-AUDIO-R) ( f ) SURROUND EXTERNAL SPEAKER OUTPUT ( c ) AV INPUT (VIDEO/L-AUDIO-R)-1, 2 ( g ) SURROUND EXTERNAL SPEAKER OUTPUT SELECTION ( d ) COMPONENT VIDEO/AUDIO INPUT-1, 2 ➢ ☛ For further details about connection, refer to pages 71~76. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. English - 7 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 8 Using a Display Deck You can display a VCR or DVD Player, etc. by using the display deck. Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly English - 8 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against - on the remote control ◆ + on the battery against + on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 9 Infrared Remote Control TELEVISION STANDBY SWITCH BETWEEN THE TV AND DVD MODE OPEN/CLOSE THE DISC TRAY WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECTED MODE (TV, VCR, CATV, DVD OR STB) AND REMAINING BATTERIES ON LCD MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CATV, DVD PLAYER, STB DIRECT CHANNEL SELECTION DVD INFORMATION DISPLAY / ONE, TWO, OR THREE-DIGIT CHANNEL SELECTION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED/ RETURN TO PREVIOUS MENU NEXT CHANNEL/ TELETEXT NEXT PAGE EXTERNAL INPUT SELECTION VOLUME DECREASE PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST MENU DISPLAY/ TELETEXT INDEX CONTROL THE CURSOR IN THE ON-SCREEN MENU CONFIRM YOUR CHOICE (STORE OR ENTER) ACCESS VARIOUS CAMERA ANGLES ON A DVD / TELETEXT SIZE SELECTION INFORMATION DISPLAY/ TELETEXT REVEAL EXIT FROM ANY DISPLAY/ TUNER/CABLE NETWORK SELECTION FASTEXT TOPIC SELECTION/ VCR/DVD FUNCTIONS; - SEARCH BACKWARD ( )/ BACK SKIP THE TITLE, CHAPTER, OR TRACK ( ) - STOP ( ) - PLAY/PAUSE ( ) - SEARCH FORWARD ( )/ NEXT SKIP THE TITLE, CHAPTER, OR TRACK ( ) DELETE A BOOKMARK NUMBER AND CANCEL THE PROGRAM PLAY/ PICTURE EFFECT SELECTION SELF FOCUS DNIe ON/OFF/DEMO PICTURE SIZE/ TELETEXT SUB-PAGE REMOTE CONTROL SETUP PIP FUNCTIONS; - PIP ACTIVATING OR DEACTIVATING (PIP ON) - SWAPPING THE MAIN AND THE SUB PICTURE (SWAP) - SELECTING THE CHANNEL OF SUB PICTURE (P / ) SOUND EFFECT SELECTION/ SELECTION TELETEXT CANCEL SOUND MODE SELECTION IF YOUR REMOTE CONTROL IS NOT FUNCTIONING PROPERLY, TAKE OUT THE BATTERIES AND PRESS THE RESET BUTTON FOR ABOUT 2~3 SECONDS. RE-INSERT THE BATTERIES AND TRY USING THE REMOTE CONTROL AGAIN. ➢ PICTURE FREEZE/ TELETEXT PAGE HOLD The performance of the remote control may be affected by bright light. English - 9 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 10 Connecting to an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television. 2 If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to: ◆ “Storing Channels Automatically” on page 20. ◆ “Storing Channels Manually” on page 22. Rear of the TV or Cable Television Network English - 10 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 11 Connecting a Satellite Receiver or Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV. Rear of the TV Using a Coaxial cable Connect a coaxial cable to the: ◆ Receiver (or Decoder) output socket. ◆ Television aerial input socket. ➢ If you wish to connect both a satellite receiver (or decoder) and a VCR, you should connect the: ◆ Receiver (or Decoder) to the VCR ◆ VCR to the television Otherwise, connect the receiver (or decoder) directly to the television. Satellite receiver/ Decoder English - 11 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 12 Switching Your Television On and Off The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ TV The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. 2 Press the power switch on the side of the television toward “ON” (I). The Standby indicator on the front of the television Result: lights up. 3 Press the POWER ( ) button on the remote control to switch the television on. The programme that you were watching last is reResult : selected automatically. ➢ 4 ◆ If your television isn’t turned on when the POWER ( ) button is pressed, press the SELECT button to check if the “TV” mode has been chosen. ◆ If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 20 or “Storing Channels Manually” on page 22. To switch your television off, press the power switch toward “OFF”. Placing Your Television in Standby Mode Your television can be placed in Standby mode, in order to reduce the power consumption. TV The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER ( Result: 2 The screen is turned off and the Standby indicator on the front of the television lights up. To switch the television back on, simply press the POWER ( button again or a numeric button. ➢ ☛ English - 12 ) button on the remote control. You can also switch on by pressing the TV ( numeric button. ), P / ) or Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the power switch toward “OFF”. It is best to unplug the set from the mains and aerial. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 13 Becoming Familiar with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions. Button to Viewing Function Menu Function Used to display the next stored channel. - Used to display the previous stored channel. - Used to display the corresponding channels. For double digit channels, the second digit must be pushed immediately after the first. Failure to do this will result in a single digit channel being displayed.. ➢ -/--/--- Used to select a channel numbered ten or over. Press this button, and the “--” or “---” symbol is displayed. Enter the two or three-digit channel number. PRE-CH Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the numeric buttons to select second channel. Then, use the PRE-CH button to quickly alternate between them. Used to increase the volume. - Used to decrease the volume. - MUTE ( ) Used to switch the sound off temporarily. To turn the sound back on, press this button again, or press the or button. MENU ( ) Used to display the on-screen menu system. Used to return to the previous menu or normal viewing. - Used to: ◆ Display a submenu containing selections for the current menu option ◆ Increase/decrease a menu option value - Used to confirm your choice. TV ( ) EXIT ( ) ➢ Used to switch the television on when it is in Standby mode. - Used to exit from the menu system and return to normal viewing directly Used to exit from the any display. English - 13 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 14 Plug & Play Feature When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. Plug & Play Start Plug & Play OK 1 Enter Exit If the television is in Standby mode, press the POWER ( on the remote control. Result: Plug & Play 2 Language English 3 Enter Skip 4 Plug & Play 5 OK Enter Skip The message Check antenna input. is displayed. The Area menu is displayed. Select your area by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm your choice. Result: 6 The Language menu is displayed. Make sure that the antenna is connected to the TV, and then press the ENTER ( ) button. Result: Check antenna input. ) button. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm the language. Result: Move The message Start Plug & Play is displayed. To start the Plug & Play, press the ENTER ( Result: ) button The Auto Store menu is displayed. To start the channel store, press the ENTER ( ) button. Plug & Play Result: Area Asia/W. Europe CIS/East Europe China Hong Kong/UK Australia NZ/Indonesia ➢ † Move Enter Skip 7 Plug & Play To stop the search before it has finished or return to normal viewing, press the MENU ( ) button. Press the œ or √ button to move to the Hour, Minute or am/pm. Set these by pressing the ▲ or ▼ button. ➢ Auto Store The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last). When it has finished, the Clock Set menu is displayed. You can also set the Hour and Minute by pressing the numeric buttons directly. Start Enter Skip Plug & Play Clock Set Hour Minute am/pm -- -- am œ √ Move Adjust Enter Plug & Play Enjoy your watching. OK English - 14 Skip 8 Press the ENTER ( 9 When the setting has finished all, the message Enjoy your watching. is displayed, and then the channel which has been stored will be activated. ) button. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 15 Plug & Play Feature (continued) If you want to reset this feature... TV 1 Press the MENU ( Result: 2 √ Time √ Plug & Play The main menu is displayed. Language √ : English √ Press the ▲ or ▼ button until the Setup is selected. Self Focus Blue Screen : Off √ Result: Melody : On √ The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Plug & Play option is selected. Press the ENTER ( ) button. Result: 5 Setup ) button. ) button. Move Enter Return This feature starts with the message Start Plug & Play is displayed. For further details on how to set, refer to the opposite page. Displaying Information You can view the channel information and setting status you select by pressing the “INFO ( )” button on the remote control. P 1 Mono Picture Mode : Sound Mode : Dolby Pro Logic II Dynamic Standard : Off 12 : 02 am English - 15 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 16 Choosing Your Language TV Setup √ Time When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. √ Plug & Play Language √ : English 1 Blue Screen : Off √ Melody : On √ Result: 2 Move Enter TV ) button. Press the ▲ or ▼ button until the Setup is selected. Result: Return The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Language is selected. Press the ENTER ( ) button. ) button. Setup Time √ Plug & Play √ English : English Language √ Result: √ Self Focus Move Press the MENU ( √ Self Focus Blue Screen : Off √ Melody : On √ Enter English - 16 Return 5 The languages available are listed. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm your choice. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 17 Adjusting the Screen Automatically (Self Focus) The “Self Focus” feature automatically finds the optimum picture quality when blurring, overlapping colors or incorrect focus occurs. These conditions may be caused by moving your TV. TV Setup √ Time √ Plug & Play 1 Press the MENU ( Result: 2 ) button. Language The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Self Focus is selected. Press the ENTER ( ) button. Blue Screen : Off √ Melody : On √ Move Enter 5 Result: ➢ ➢ Self Focus √ Self Focus The Self Focus is selected. Press the ENTER ( Return ) button. TV Result: √ Self Focus Press the ▲ or ▼ button until the Setup is selected. Result: √ : English Auto : On √ Message Display : On √ ) button again The self focus process begins with the message Self Focus and horizontal bar is displayed. During the process, minor distortions of the picture may occur. At this time, the colors may diffuse and a searching action will appear on the edges of the screen. This is a normal part of the adjustment. When it is finished, all of things will disappear and the optimum picture quality can be enjoyed. Move Enter Return Self Focus You can also set these options simply by pressing the SELF FOCUS button. ◆ Changing channels and any other signal changes will pause the self focus until a stable signal has returned. It resumes after the signal has been stabilised. This feature will not work without a signal. ◆ Ambient light that is too bright may affect the self focus. If this occurs, darken the environment and try again. English - 17 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 18 Deactivating the Automatic Execution of the Self Focus TV Setup √ Time √ Plug & Play Language : English √ √ Self Focus Blue Screen : Off √ Melody : On √ Move The “Self Focus” feature starts on default. It will automatically begin 10 minutes after switching on the power and the appearance of the screen image. To set the optimum picture quality, the “Self Focus” will automatically begin again after another 30 minutes, as the screen image is then fully stabilised. Enter Return 1 Press the Result: 2 Self Focus √ Self Focus Auto : On √ Message Display : On √ Enter TV Self Focus √ Self Focus Message Display : On Off √ : On On √ Enter Return Auto Move Return English - 18 The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Self Focus is selected. Press the ENTER ( ) button. Result: Move ) button. Press the ▲ or ▼ button until the Setup is selected. Result: TV Press the MENU ( ) button. The options available in the Self Focus group are displayed. 5 Press the ▲ or ▼ button until the Auto is selected. Press the ENTER ( ) button. 6 To turn off the automatic execution of the self focus feature, select Off by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 19 Removing the “Self Focus” from the Display 1 Press the MENU ( Result: 2 ) button. TV The main menu is displayed. Press the ENTER ( 4 Press the ▲ or ▼ button until the Self Focus is selected. Press the ENTER ( ) button. Result: √ Language √ : English √ Self Focus The options available in the Setup group are displayed. 3 √ Plug & Play Press the ▲ or ▼ button until the Setup is selected. Result: Setup Time Blue Screen : Off √ Melody : On √ ) button. The options available in the Self Focus group are displayed. 5 Press the ▲ or ▼ button until the Message Display is selected. Press the ENTER ( ) button. 6 To remove the message Self Focus and horizontal bar on the screen during the self focus process, select Off by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Move Enter TV Return Self Focus √ Self Focus Auto : On √ Message Display : On √ Move Enter TV Return Self Focus √ Self Focus Move √ Auto : On Message Dispaly √Off : On√ On Enter English - 19 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 20 Storing Channels Automatically TV Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Child Lock √ Fine Tune √ You can scan for the frequency ranges available to you, (availability depends on your area). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button until the Channel is selected. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( ) button. Result: The Auto Store is selected. 4 Press the ENTER ( ) button again. Result: The Auto Store menu is displayed with Area option selected. 5 Press the ENTER ( ) button once again. Select your area by pressing the ▲ or ▼ button. Result: The areas available are listed. 6 Press the ENTER ( 7 Press the ▲ or ▼ button until the Search is selected. Press the ENTER ( ) button. 8 Press the ENTER ( ) button to start the search. Result: The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed. To stop the search before it has finished or return to normal viewing, press the MENU ( ) button. ▼ More Move Enter TV Return Auto Store Area : OffAsia/W.Europe Search CIS/East Europe China Hong Kong/UK Australia Nz/Indonesia ▼ Move Enter TV Return Auto Store : Asia/W.Europe √ Area √ Search Move Enter Return ) button to confirm your choice ➢ Search 9 When searching and storing are complete, the Sort menu is displayed. ◆ To sort the stored channels into the desired numerical order, go to Step 5 of the “Sorting the Stored Channels” procedure on page 21. ◆ To exit from the channel store function without sorting the channels, press the MENU ( ) button repeatedly until the menus disappear. 10 When the channels have been stored, you can: ◆ Sort them in the order required (see page 21) ◆ Clear a channel (see page 24) ◆ Fine-tune channel reception if necessary (see page 26) ◆ Activate/deactivate the LNA (Low Noise Amplifier) feature (see page 27) ◆ Activate/deactivate the Digital NR (Digital Noise Reduction) feature (see page 35) Start Enter Return Search P 1 C -Stop Enter 65 MHz Return Search 20 channels are memorized. OK English - 20 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 21 Sorting the Stored Channels This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using the auto store. You can delete those channels you do not want to keep. 1 Press the MENU ( Result: 2 TV ) button. The main menu is displayed. The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Sort is selected. Press the ENTER ( ) button. ) button. √ Manual Store √ Add/Delete √ Sort √ Child Lock √ Fine Tune √ ▼ More Press the ▲ or ▼ button until the Channel is selected. Result: Channel Auto Store Move Enter TV Return Sort Prog.CH Result: 5 6 Select the channel that you wish to move by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Select the number of the programme to which the channel is to be moved by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result: 7 The Sort menu is displayed. 1 C -- 2 C -- 3 C -- 4 C -- Move Enter TV Return Sort Prog.CH The channel is moved to its new position and all other channels are shifted accordingly. Repeat Steps 5 to 6 until you have moved all the channels to the required programme numbers. Move 1 C -- 2 C -- 3 C -- 4 C -- Enter English - 21 C -- Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 22 Storing Channels Manually TV You can store the television channels, including those received via cable networks. Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Child Lock √ Fine Tune √ When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify ▼ More Move Enter TV Return 1 Result: Manual Store 2 Programme Move 1 Auto BG C- - 2 Auto BG C- - 3 Auto BG C- - 4 Auto BG C- - Enter Press the MENU ( Return ) button. The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Manual Store is selected. Press the ENTER ( ) button. Result: ) button. The current channels are displayed. Manual Store Prog. Color System Sound System 1 Auto BG CH Search Store C- - 83MHz ? œ √ Move Adjust 5 Result: To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼ button. 7 If necessary, select the broadcasting standard required. Press the œ or √ button until the Color System is selected and press the ▲ or ▼ button. The color standards are displayed in the following order. Return Prog. Color System Sound System 1 Auto BG CH Search Store C- - 83MHz ? Adjust Return Manual Store Prog. Color System Sound System 1 Auto BG CH Search Store C- - 83MHz ? œ √ Move Adjust English - 22 The Prog. is selected. 6 Manual Store œ √ Move Select the channel that you wish to move by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Return Auto - PAL - SECAM - NT4.43 - NT3.58 8 Press the œ or √ button until the Sound System is selected and press the ▲ or ▼ button. The sound standards are displayed in the following order. BG - DK - I - M BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 23 Storing Channels Manually (continued) 9 If you know the number of the channel to be stored, see the following steps. ◆ Press the œ or √ button until the CH is selected. ◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). ◆ Press the √ button ◆ Press the ▲ or ▼ button to select the required number. ➢ 10 Manual Store Prog. Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen. 1 Auto BG Search Store C- - 83MHz ? œ √ Move 12 Prog. ☛ Channel mode ◆ P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode. ◆ C (Real channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. ◆ S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Return Color System Sound System 1 Auto BG CH Search Store C- - 83MHz ? To store the channel and associated programme number, select Store by pressing the œ or √ button. Set to OK by pressing the ENTER ( ) button. Repeat Steps 9 to 11 for each channel to be stored. Adjust Manual Store œ √ Move 11 Sound System CH If no sound or abnormal sound can be heard, re-select the sound standard required. If you do not know the channel numbers, select the Search by pressing the œ or √ button. Press the ▲ or ▼ button to start the search. Color System Adjust Return Manual Store Prog. Color System Sound System 1 Auto BG CH Search Store C- - 83MHz ? œ √ Move Adjust Return Manual Store Prog. Color System Sound System 1 Auto BG CH Search Store C- - 83MHz OK œ √ Move Enter English - 23 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 24 Skipping Unwanted Channels TV Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Child Lock √ Fine Tune √ You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Result: ▼ More Move Press the MENU ( Enter Return 2 Result: 0 In Memory < > Change Enter Return Press the ENTER ( 4 Press the ▲ or ▼ button until the Add/Delete is selected. Press the ENTER ( ) button. Result: Add/Delete P 1 Not in Memory < > Change Enter English - 24 Return ) button. The Add/Delete menu is displayed with the current channel selected. 5 Press the CH or button to delete or add the required channel. Press the ENTER ( ) button. 6 Repeat Step 5 for each channel to be erased or added. Add P The options available in the Channel group are displayed. 3 Delete P The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Add/Delete P ) button. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 25 Locking the Channel This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. 1 Press the MENU ( Result: TV ) button. Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Child Lock √ Fine Tune √ ▼ More The main menu is displayed. Move 2 Result: 3 4 Enter Return Press the ▲ or ▼ button until the Channel is selected. The options available in the Channel group are displayed. Press the ENTER ( TV ) button. Press the ▲ or ▼ button until the Child Lock is selected. Press the ENTER ( ) button. Result: The Child Lock menu is displayed and the current channel is shown as selected. 5 Press the ▲ or ▼ button to select the channel to be locked. 6 Press the ENTER ( ) button. To lock the channel, select Locked by pressing the ▲ or ▼ button (to unlock the channel, select Unlocked). Press the ENTER ( ) button to confirm. Child Lock Prog. Lock 1 Unlocked 2 Unlocked 3 Unlocked 4 Unlocked Move Enter TV Move Return Child Lock Prog. Lock 1 Locked 2 Unlocked 3 Unlocked 4 Unlocked Enter English - 25 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 26 Fine Tuning Channel Reception TV Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Child Lock √ Fine Tune √ If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 1 Result: ▼ More Move Enter Return Press the MENU ( 2 ) button. The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: The options available in the Channel group are displayed. Fine Tune P 1 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Fine Tune is selected. Press the ENTER ( ) button. 5 Reset œ √ Adjust Move Save ) button. Return Result: 5 Fine Tune To obtain a sharp and clear picture and good sound quality, press the œ or √ button until you reach the setting. Result: P 1 ✽ The horizontal bar is displayed. The program number turns in red. 5 6 Reset œ √ Adjust Move Save Return Result: 7 Fine Tune P 1 ✽ 5 Reset Move Enter Return Fine Tune P 1 0 Reset Move To store the fine tuning setting in the TV’s memory, press the ENTER ( ) button. Enter English - 26 Return The “ ✽ ” symbol is displayed To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼ button then press the ENTER ( ) button. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 27 Using the LNA (Low Noise Amplifier) Feature This feature is very useful in the situation that the TV is used in a weak signal, and amplifies the TV signal in the weak signal area, but not noise. TV This feature is working only in a weak signal condition, and that is memorized on relevant channel’s additional information. 1 Press the MENU ( Result: 2 LNA : Off √ √ CH. Scan ) button. The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: Channel ▲ More The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the LNA is selected. Press the ENTER ( ) button. 5 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Move Enter TV Return Channel ▲ More LNA ) button. CH. Scan Move : Off Off On Enter English - 27 √ √ Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 28 Viewing the Channel Scan Picture TV 1 Channel Result: ▲ More LNA Press the MENU ( : Off √ √ CH. Scan 2 Enter Return English - 28 The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the CH. Scan is selected. Press the ENTER ( ) button. ) button. Return Result: CH. Scan P 8 P 50 The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: Move ) button. You can view every memorized channel in order. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 29 Changing the Picture Standard You can select the picture mode which best corresponds to your viewing requirements. 1 Press the MENU ( 6 Color Tone √ √ Scan Mode : Auto √ Digital NR : Off √ ▼ More Move Enter Return ) button. The Mode is selected. Press the ENTER ( √ : Normal Size TV Picture Custom : Dynamic Dynamic √ Standard √ Color Tone : Normal Movie Mode Result: 5 The options available in the Picture group are displayed. √ : Dynamic Custom The main menu is displayed. Press the ENTER ( Result: 4 ) button. Press the ▲ or ▼ button until the Picture is selected. Result: 3 Picture Mode Result: 2 TV ) button again. The options available are listed. Size Select the required option by pressing the ▲ or ▼ button. Scan Mode Custom : Auto Digital NR : Off Result: ▼ More The following modes are available: Dynamic - Standard - Movie - Custom Press the ENTER ( ➢ Move Enter ) button to confirm. You can select these options by simply pressing the P.MODE (Picture Mode) button on the remote control. (Not available in DVD mode) Dynamic English - 29 √ √ √ √ Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 30 Customizing the Picture Settings TV Your television has several settings options that allow you to control picture quality. Picture Mode √ : Dynamic √ Custom Color Tone √ : Normal 1 √ Size Scan Mode : Auto √ Digital NR : Off √ ▼ More Press the MENU ( Result: 2 Enter TV The main menu is displayed. Press the ▲ or ▼ button until the Picture is selected. Result: Move ) button. Return The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Custom is selected. Press the ENTER ( ) button. ) button. Custom Contrast Brightness Sharpness Color 100 50 75 55 Result: 5 Move Enter Return Select the option (Contrast, Brightness, Sharpness, Color or Tint-NTSC only) to be adjusted by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result: Contrast ➢ 100 TV Color Tone √ √ : Normal √ Size Scan Mode : Auto √ Digital NR : Off √ ▼ More Move Enter Color Tone Return Normal English - 30 If you make any changes to the custom settings, the picture standard is automatically switched to the Custom. Press the MENU ( ) button to return to the Picture menu. Press the ▲ or ▼ button until the Color Tone is selected. Press the ENTER ( ) button. 7 Select the required color tone (Warm 1 ~ Warm 10, Normal, Cool 1 ~ Cool 10) by pressing the œ or √ button. √ : Dynamic Custom The horizontal bar is displayed. Press the œ or √ button until you reach the setting. 6 Picture Mode The Custom menu is displayed. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 31 Selecting the Picture Size (4:3 Model) You can select the picture size which best corresponds to your viewing requirements. 1 2 TV Picture Mode Press the MENU ( ) button. The main menu is displayed. Result: Color Tone 4 Press the ▲ or ▼ button until the Size is selected. Press the ENTER ( ) button. Result : The Size menu is displayed. ) button. : Normal √ √ Size Scan Mode : Auto √ Digital NR : Off √ ▼ More Move Press the ENTER ( √ √ Custom Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are displayed. 3 : Dynamic Enter TV Return Size Normal Zoom 1 5 Select the required mode by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result : The following modes are available: Normal Adjusts the picture to fit into a 4:3 normal aspect ratio. (Prolonged use in 4:3 mode may cause the lifespan of the CRT to be reduced.) Zoom 1 Vertically enlarges the picture approximately 130%. Zoom 2 Vertically enlarges the picture about approximately 150%. Cinema When the top and bottom of the screen margin are black (blank), they will change to gray. ➢ ➢ Zoom 2 Cinema Move Enter Lifting is available in the Zoom 1 or Zoom 2 mode by pressing the ▲ or ▼ button ◆ You can select these options by simply pressing the P.SIZE button on the remote control. ◆ The picture size can not be changed in the PIP mode. 4:3 Signal Normal Zoom 1 Zoom 2 Cinema Zoom 1 Zoom 2 Cinema 16:9 Signal Normal English - 31 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 32 Selecting the Picture Size (Wide Model) TV You can select the picture size which best corresponds to your viewing requirements. Picture Mode : Dynamic Color Tone √ √ Custom : Normal 1 √ Result: √ Size Scan Mode : Auto √ Digital NR : Off √ 2 ▼ More Move Return 4 Press the ▲ or ▼ button until the Size is selected. Press the ENTER ( ) button. 5 Return The options available in the Picture group are displayed. Press the ENTER ( Result : Enter The main menu is displayed. 3 Size 16:9 Panorama Zoom 1 Zoom 2 4:3 Cinema 1 Cinema 2 ) button. Press the ▲ or ▼ button until the Picture is selected. Result : Enter TV Move Press the MENU ( ) button. The Size menu is displayed. Select the required mode by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result : The following modes are available: 16:9 Adjusts the picture to fit into the 16:9 wide aspect ratio. Panorama Adjusts a Wide picture to appear natural. Zoom 1 Vertically enlarges the picture approximately 130%. Zoom 2 Vertically enlarges the picture about approximately 150%. 4:3 Adjusts the picture to fit into a 4:3 normal aspect ratio. (Prolonged use in 4:3 mode may cause the lifespan of the CRT to be reduced.) Cinema 1 To maintain optimum screen display, the picture is vertically enlarged and the letterboxed (black margin) area is filled with gray instead. Cinema 2 When the top and bottom of the screen margin are black (blank), they will change to gray. ➢ ◆ Lifting is available in the Zoom 1 or Zoom 2 mode by pressing the ▲ or ▼ button. ◆ Subtitles may be cut-off or hidden below the screen area in Zoom 1, Zoom 2, Cinema 1 and Cinema 2 modes. ➢ English - 32 ◆ You can select these options by simply pressing the P.SIZE button on the remote control. ◆ The picture size can not be changed in the PIP mode. BP68-00380A (J61A_Asia_ENG) 12/10/04 3:51 PM Page 33 Selecting the Picture Size (Wide Model) (continued) 4:3 Signal 16:9 16:9 4:3 4:3 Panorama Panorama Cinema 1 Cinema 1 Zoom 1 Zoom 1 Zoom 2 Zoom 2 Cinema 2 Cinema 2 16:9 Signal 16:9 16:9 4:3 4:3 Panorama Panorama Cinema 1 Cinema 1 Zoom 1 Zoom 1 Zoom 2 Zoom 2 Cinema 2 Cinema 2 English - 33 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 34 Selecting the Scan Mode TV Picture Mode √ : Dynamic √ Custom Color Tone You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. √ : Normal √ Size Scan Mode : Auto √ Digital NR : Off √ 1 Result: ▼ More Move Enter Return Press the MENU ( 2 Picture Mode √ : Dynamic √ : Normal Size Auto 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Scan Mode is selected. Press the ENTER ( ) button. 5 Select the required option by pressing the ▲ or ▼ button. √ Scan Mode : Auto Natural √ Digital NR : Off √ ▼ More Move The options available in the Picture group are displayed. ) button. √ Custom Color Tone The main menu is displayed. Press the ▲ or ▼ button until the Picture is selected. Result: TV ) button. Digital Progressive Enter Result: Return 6 English - 34 The following modes are available: Auto - Natural - Digital - Progressive Press the ENTER ( ) button to confirm. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:50 AM Page 35 Using the Digital NR (Digital Noise Reduction) Feature If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. TV Picture Mode : Dynamic 1 Press the MENU ( Result: 2 ) button. The main menu is displayed. The options available in the Picture group are displayed. Press the ENTER ( ) button. 5 √ : Auto √ Digital NR : Off √ ▼ More Move Enter TV Return Picture : Dynamic √ √ Press the ▲ or ▼ button until the Digital NR is selected. Press the ENTER ( ) button. Custom Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Scan Mode : Auto √ Digital NR : Off Off On √ Color Tone : Normal √ √ Size ▼ More Move Enter Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the “STILL” button. To return to normal viewing, press it again. ➢ √ Scan Mode Mode 4 : Normal Size Press the ▲ or ▼ button until the Picture is selected. Result: 3 Color Tone √ √ Custom If you press the STILL button during PIP on, the main picture is stilled, not sub picture. English - 35 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 36 DNIeTM (Digital Natural Image engine) TV Picture ▲ More √ PIP DNIe √ : On This feature brings you more detailed images with 3D noise reduction, detail enrichment, contrast and white enhancement. A new image Compensation Algorithm gives brighter, clearer, more detailed image. DNIeTM technology will always deliver the best quality pictures from any signal. 1 Press the MENU ( Result: Move Enter Return 2 TV Press the ▲ or ▼ button until the Picture is selected. Result: Picture ▲ More √ PIP DNIe Move √ : On On Off Demo Enter Return DNIe Demo DNIe On DNIe Off The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the DNIe is selected. Press the ENTER ( ) button. 5 Press the ▲ or ▼ button to change the setting. Press the ENTER ( ) button to confirm. ◆ On: Switches on the DNIe mode. ◆ Off: Switches off the DNIe mode. ◆ Demo (Option) : The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. ➢ English - 36 ) button. The main menu is displayed. ) button. You can select these options simply by pressing the DNIe button. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 37 Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off. TV Setup √ Time √ Plug & Play Language 1 Press the MENU ( 4 5 The main menu is displayed. Press the ▲ or ▼ button until the Setup is selected. Result: 3 ) button. √ √ Self Focus Result: 2 : English Blue Screen : Off √ Melody : On √ Move Enter Return The options available in the Setup group are displayed. Press the ENTER ( ) button. TV Setup √ Time √ Plug & Play Press the ▲ or ▼ button until the Blue Screen is selected. Press the ENTER ( ) button. Language : English Blue Screen Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Melody Move √ √ Self Focus : Off Off : On On Enter English - 37 √ √ Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 38 Viewing the Picture In Picture (PIP) Picture TV ▲ More √ PIP DNIe You can display a sub picture within the main picture of TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. √ : On 1 Press the MENU ( Result: Move Enter Return 2 Result: : On Off : TV On √ Source Size : √ PIP √ √ Swap Position : √ Prog. : P 1 √ Move Enter 1 The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the PIP is selected. Press the ENTER ( ) button. 1 Result: 1 ) button. The PIP menu is displayed with PIP option selected. Return 5 Press the ENTER ( ) button again. To activate, set the PIP to on by pressing the ▲ or ▼ button. Press the ENTER ( ) button. √ 6 Press the ▲ or ▼ button until the Source is selected. Press the ENTER ( ) button. PIP TV PIP : On Source : TV Size : Swap Position Prog. Move : TV √ AV1 √ AV2 √ AV3 : P 1S-Video Enter Result: √ 7 Select a source of the sub picture by pressing the ▲ or ▼ button. Press the ENTER ( ) button 8 Press the ▲ or ▼ button until the Size is selected. Press the ENTER ( ) button. Return PIP : On √ Source : TV √ Size : √ Position : √ Prog. : P 1 √ Move Result: √ Swap Enter ➢ Return PIP TV PIP : On √ Source : TV √ Size : √ √ Swap Position : √ Prog. : P 1 √ Enter The sources available are displayed. TV - AV1- AV2 - AV3 - S-Video √ PIP TV Move The main menu is displayed. Press the ▲ or ▼ button until the Picture is selected. PIP TV ) button. The sizes available are displayed. (Large) (Small) (Double) (3-PIP) (12-PIP) ◆ 12-PIP : You can view up to 12 memorized channels on the sub picture spontaneously. Eas ◆ On the 12-PIP or 3-PIP mode, it is impossible to execute swap and position. Bu 9 Select a size of the sub picture by pressing the ▲ or ▼ button. Press the ENTER ( ) button.. 10 Press the ▲ or ▼ button until the Swap is selected. Press the ENTER ( ) button. Result: ➢ PI SW The main picture and the sub picture are interchanged. Not available in 12-PIP or 3-PIP modes. Return P English - 38 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 39 Viewing the Picture In Picture (PIP) (continued) Press the ▲ or ▼ button until the Position is selected. Press the ENTER ( ) button. 11 Result: ➢ The positions available are displayed. - Select a position of the sub picture by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 13 Press the ▲ or ▼ button until the Prog. is selected. Press the ENTER ( ) button.You can select the channel that you want to view through sub picture by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. ➢ PIP : On √ Source : TV √ Size : √ √ Swap The Position menu is available when the Size is Large or Small. 12 PIP TV Position : √ Prog. : P 1 √ Move Enter Return PIP TV PIP : On √ Source : TV √ Size : √ √ Swap When the Source is set to TV, you can select the channel of sub picture. Position : √ Prog. : P 1 √ Move Enter Return PIP TV PIP : On √ Source : TV √ Size : √ √ Swap Position : √ Prog. : P 1 P 1 √ Adjust Easy functions of remote control. Buttons Feature PIP Used to activate or deactivate the PIP function directly. SWAP Used to interchange the main picture and the sub picture. ➢ P / When the main picture is in the Video mode and the sub picture is in the TV mode, you might not hear the sound of main picture when pressing the SWAP ( ) button after changing the sub picture channel. At this time, reselect the channel of main picture. Used to select the channel of sub picture. English - 39 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 40 Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast. Sound TV Mode : Standard √ √ Custom Auto Volume : Off √ Dolby Digital √ Digital Audio Input √ 1 Press the MENU ( Result: 2 Enter The options available in the Sound group are displayed. Return 3 Press the ENTER ( Result: Sound TV The main menu is displayed. Press the ▲ or ▼ button until the Sound is selected. Result: Move ) button. ) button. The Mode is selected. : Custom Standard √ Music √ 4 Press the ENTER ( : Off Movie √ √ Dolby Digital Speech √ Digital Audio Input Custom 5 Select the required option by pressing the ▲ or ▼ button. Mode Custom ) button again. Auto Volume Move Enter Result: Standard - Music - Movie - Speech Custom. Return 6 Press the ENTER ( ➢ Custom English - 40 The following modes are available: ) button to confirm. You can select these options by simply pressing the S.MODE (Sound Mode) button on the remote control. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 41 Customizing the Sound Settings Your television has several settings which allow you to control sound quality. Sound TV Mode 1 Press the MENU ( Result: 2 √ : Standard √ Custom ) button. Auto Volume The main menu is displayed. √ : Off Dolby Digital √ Digital Audio Input √ Press the ▲ or ▼ button until the Sound is selected. Result: The options available in the Sound group are displayed. Move 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Custom is selected. Press the ENTER ( ) button. Result: Enter Select the option (Bass, Treble) to be adjusted by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Press the œ or √ button to reach the required setting. 6 Press the œ or √ button to reach the required setting. Press the ENTER ( ) button to confirm. Custom TV The Custom menu is displayed with the current option. 5 Bass 0 Treble 0 Move Enter If you make any changes to the custom settings, the sound standard is automatically switched to the Custom. Move Return Custom TV ➢ Return ) button. Bass 0 Treble 0 œ √ Adjust English - 41 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 42 Adjusting the Volume Automatically Sound TV Mode : Standard √ √ Custom Auto Volume √ : Off Dolby Digital √ Digital Audio Input √ Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1 Move Enter Result: Return 2 Sound TV Mode : Standard √ Auto Volume √ Dolby Digital √ : Off Off On Digital Audio Input Move Enter English - 42 √ Return ) button. The main menu is displayed. Press the ▲ or ▼ button until the Sound is selected. Result: √ Custom Press the MENU ( The options available in the Sound group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Auto Volume is selected. Press the ENTER ( ) button. 5 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. ) button. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 43 Setting the Dolby Digital The Dolby Digital mode allows you enjoy Dolby Digital sound effect fully with the speakers are connected to the television. This allows various modes for the main, center, surround and woofer speakers to be selected. Sound TV Mode : Standard Auto Volume 1 Press the MENU ( Result: 2 4 5 ) button. √ Enter Return Dolby Digital TV Dolby Pro Logic II : OffOff Dynamic Range : OffOn Level Control √ Time Delay √ √ √ The Dolby Digital menu is displayed with the Dolby ProLogic II is selected. Press the ENTER ( ) button again. Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. ➢ For further details of output depending on the each options, Move 6 If you wish to adjust the volume properly during night viewing, press the ▲ or ▼ button until the Dynamic Range is selected. Press the ENTER ( ) button. 7 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Enter Return Dolby Digital TV refer to page 45. ➢ √ Digital Audio Input Move Press the ▲ or ▼ button until the Dolby Digital is selected. Press the ENTER ( ) button. ➢ Dolby Digital The options available in the Sound group are displayed. Press the ENTER ( Result: √ : Off The main menu is displayed. Press the ▲ or ▼ button until the Sound is selected. Result: 3 ) button. √ √ Custom Dolby Pro Logic II : Off √ Dynamic Range √ Level Control : OffOff On Move √ √ Time Delay Enter Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. English - 43 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 44 Setting the Dolby Digital (continued) Dolby Pro Logic II : Off √ Dynamic Range √ : Off Level Control √ Time Delay √ Move Enter Return Test Tone : Off Off Front Left Front Right 0dB Rear Right 0dB Rear Left 0dB Sub Woofer Move Press the ENTER ( ) button again. To simulate the volume of speakers, select the On by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 10 Select the speaker (Front Left, Center, Front Right, Rear Right, Rear Left or Sub Woofer)by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 11 Select the speaker to be simulate, adjust the volume by pressing the œ or √ button. 12 When you have finished the level control, press the MENU ( button. Result: 0dB Enter The Level Control menu is displayed with the Test Tone is selected. 9 On 0dB 0dB Center ) The Dolby Digital menu is displayed again. Return 13 To set the delay time of surround channel, select the Time Delay by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 14 Select the option (Rear Right, Rear Left) to be adjusted by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Press the œ or √ button to reach the required setting. Press the ENTER ( ) button to confirm. Level Control TV Test Tone : Off √ Front Left 0dB Center 0dB Front Right 0dB Rear Right 0dB Rear Left 0dB Sub Woofer 0dB œ √ Adjust Return Dolby Digital TV Dolby Pro Logic II : Off √ Dynamic Range √ : Off Level Control √ Time Delay √ Move Enter Return Time Delay TV Move √ Press the ▲ or ▼ button until the Level Control is selected. Press the ENTER ( ) button. Result: Level Control TV Move 8 Dolby Digital TV Rear Right 5ms Rear Left 5ms œ √ Adjust English - 44 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 45 Setting the Dolby Pro LogicII In case of “Dolby Pro Logic II : Off” Output Input (Source) Main Left Center Main Right Rear Right Left Sub Woofer Mono ✔ ✔ (✔) PCM Stereo (L/R) ✔ ✔ (✔) Mono ✔ ✔ (✔) Lo/Ro ✔ ✔ (✔) Lt/Rt ✔ 5.1ch ✔ ✔ ✔ ✔ ✔ ✔ DTS ✔ ✔ ✔ ✔ ✔ ✔ MPEG I (Stereo only) ✔ MPEG II ✔ Dolby Digital ✔ (✔) ✔ ✔ ✔ (✔) ✔ ✔ ✔ In case of “Dolby Pro Logic II : On” Output Center Main Right Right Left Sub Woofer Mono ✔ ✔ ✔ ✔ ✔ ✔ PCM Stereo (L/R) ✔ ✔ ✔ ✔ ✔ ✔ Mono ✔ ✔ ✔ ✔ ✔ ✔ Lo/Ro ✔ ✔ ✔ ✔ ✔ ✔ Lt/Rt ✔ ✔ ✔ ✔ ✔ ✔ 5.1ch ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Dolby Digital DTS ✔ MPEG I (Stereo only) ✔ MPEG II ✔ ➢ Rear Main Left Input (Source) ✔ The output of sub woofer is changed depending on the speaker setting. English - 45 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 46 Setting the External Digital Sound This feature allows you enjoy Digital sound when the equipment with Digital output is connected to the television. Rear of the TV 1 Press the MENU ( Result: 2 The options available in the Sound group are displayed. Optical 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Digital Audio Input is selected. Press the ENTER ( ) button. Sound TV Mode √ : Custom Result: √ Custom Auto Volume √ : Off Dolby Digital √ Digital Audio Input √ 5 Enter TV Return Digital Audio Input Optical : - - - ----- √ Coaxial : - - - -AV1 √ AV2 AV3 S-Video Component1 Component2 Enter English - 46 Return 6 ) button. The options available in the Digital Audio Input group are displayed. Select the option (Optical, Coaxial) by pressing the ▲ or ▼ button. Press the ENTER ( ) button. ➢ Move Move The main menu is displayed. Press the ▲ or ▼ button until the Sound is selected. Result: Coaxial ) button. ◆ The Optical and Coaxial options are for digital signal inputs, such as the Dolby Digital (5.1ch), Dolby Prologic (4ch), DTS, or MPEG. ◆ Optical : Converts the electric signal into an optical light signal, and transmits it through glass fibers. A transmission system of digital audio in the form of a light wave, S/PDIF format using a glass conductor. ◆ Coaxial : The digital audio signal is received through a coaxial copper cable. Select the required output (AV1, AV2, AV3, S-Video, Component1 or Component2) by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 47 Setting the Melody Sound You can hear clear melody sound when the television is powered on or off. Setup TV √ Time 1 Press the MENU ( Result: 2 Language The main menu is displayed. : English Blue Screen : Off √ Melody : On √ The options available in the Setup group are displayed. Move 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Melody is selected. Press the ENTER ( ) button. Enter 6 Setup TV √ Time √ Language Select the required option (Off or On) by pressing the ▲ or ▼ button. Press the ENTER ( Return ) button. Plug & Play 5 √ √ Self Focus Press the ▲ or ▼ button until the Setup is selected. Result: √ Plug & Play ) button. : English ) button to confirm. Move √ √ Self Focus Blue Screen : Off √ Melody : On Off On √ Enter English - 47 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 48 Selecting the Sound Mode The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual I ” or “Stereo”, depending on the current transmission. Regular broadcast (Standard audio) Mono (Normal use) Regular + NICAM Mono NICAM ↔ Mono Mono (Normal) NICAM Stereo NICAM ↔ Mono Stereo (Normal) NICAM Dual I/II NICAM → NICAM → Mono Dual I Dual II (Normal) → On-screen indication → NICAM Stereo Type of broadcast A2 Stereo Regular broadcast (Standard audio) Mono (Normal use) Bilingual or Dual I/II Dual I ↔ Dual II Stereo ➢ Stereo ↔ Mono (Forced mono) ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono. ◆ If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. ◆ When receiving a mono sound in the AV mode, connect to the “AUDIO-L” input connector on the panel (front or side, depending on the model). If the mono sound comes out only from left speaker, press the DUAL I-II button. English - 48 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 49 Setting and Displaying the Current Time You can set the television’s clock so that the current time is displayed by pressing the “INFO ( ) ” button. You must also set the time if you wish to use the automatic on or off timers. ➢ 1 √ Time √ Plug & Play When pressing the “ I ” button (On/Off) on the panel of the television, the clock setting will be reset. Press the MENU ( Result: 2 Setup TV The main menu is displayed. √ Self Focus Blue Screen : Off √ Melody : On √ Move Press the ENTER ( 4 Press the ▲ or ▼ button until the Time is selected. Press the ENTER ( ) button. 5 Press the ENTER ( 6 Press the ¦ or button to move to the Hour, Minute or am/pm. Set these by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. ) button. Return Time Clock ) button. The options available in the Time group are displayed with Clock is selected. Enter TV The options available in the Setup group are displayed. 3 Result: √ : English ) button. Press the ▲ or ▼ button until the Setup is selected. Result: Language √ : -- : -- am Sleep Timer : Off √ On Timer : Off √ Off Timer : Off √ Move Enter Return Clock TV Clock Set ➢ Hour Minute am/pm 11 00 am You can also set the Hour and Minute by pressing the numeric buttons directly. œ √ Move Adjust English - 49 Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 50 Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. Setup TV √ Time √ Plug & Play Language : English √ √ Self Focus Blue Screen : Off √ Melody : On √ 1 Result: 2 Move Enter Clock : 11 : 35 am √ On Timer : Off √ Off Timer : Off √ Press the ENTER ( 4 Press the ▲ or ▼ button until the Time is selected. Press the ENTER ( ) button. Clock : 11 : 35 Off am √ Sleep Timer : Off 30 √ On Timer : Off 60 √ Off Timer : Off 90 √ 120 150 180 Move Enter English - 50 ) button. Return The options available in the Time group are displayed. 5 Press the ▲ or ▼ button until the Sleep Timer is selected. Press the ENTER ( ) button. 6 Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for staying on by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Return Time TV The options available in the Setup group are displayed. 3 Result: Enter The main menu is displayed. √ Sleep Timer : Off Move ) button. Press the ▲ or ▼ button until the Setup is selected. Result: Return Time TV Press the MENU ( ➢ If the sleep timer is not yet set, Off is displayed. If the sleep timer is already set, the remaining time before which the television switches to Standby mode is displayed. r BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 51 Switching the Television On and Off Automatically You can set the On or Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select 1 √ Plug & Play Language The first step is to set the television’s clock (refer to “Setting the Current Time” on page 49). If you have not yet set the clock, the message Set the clock first. is displayed. 2 Press the ▲ or ▼ button until the Setup is selected. The options available in the Setup group are Result: displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Time is selected. Press the ENTER ( ) button. The options available in the Time group are displayed. Result: √ ) button. Blue Screen : Off √ Melody : On √ Move Enter 6 Select the Hour, Minute, am/pm, Prog No. (programme number) or Volume. Press the œ or √ button to set these by pressing the ▲ or ▼ button. 7 To activate the On Timer with the settings satisfied, select Activation to by pressing the œ or √ button,then select Yes by pressing the ▲ or ▼ button. Clock Press the MENU ( ) button. The options available in the Time group are displayed Result: again. 9 Press the ▲ or ▼ button until the Off Timer is selected. Press the ENTER ( ) button. Result: The Off Timer menu is displayed. 10 Set the Off Timer as methods for On Timer setting. Sleep Timer : 30 min √ On Timer : Off √ Off Timer : Off √ Move Enter Return On Timer TV On Timer Hour Minute am/pm 6 30 am Prog No. Volume Activation P 1 œ √ Move 10 Yes Adjust Return Time Clock : 11 : 35 am Sleep Timer : 30 min √ √ On Timer : 6 : 30 am On √ Off Timer : Off Move √ Enter Return Off Timer TV Off Timer Hour 11 Absent Power Off When you set the timer “On”, your television will eventually be turned off, if you do not operate any controls during the 3 hours after the TV is turned on by timer. This function is available in only the timer “On” mode and will prevent a leakage accident or overheating, caused by your TV left on for a long time due to the timer “On” (when you are away on holiday, for example). √ : 11 : 35 am TV 8 Return Time TV Press the ▲ or ▼ button until the On Timer is selected. Press the ENTER ( ) button. Result: The options available in the On Timer group are displayed. ➢ √ : English Self Focus Press the MENU ( ) button. The main menu is displayed. Result: 5 √ Time ◆ Switch off automatically at the time you select ➢ Setup TV œ √ Move Minute am/pm Activation 00 am Adjust English - 51 Yes Return BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 52 Viewing an External Signal Source Input TV Source List √ : TV Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box and the TV source (broadcast or cable) √ Edit Name 1 Press the MENU ( Result: Move Enter Return 2 Source List TV The options available in the Input group are displayed. Press the ENTER ( Result: ) button. ) button. The Source List is selected. 3 Press the ENTER ( 4 Press the ▲ or ▼ button to select signal source, then press the ENTER ( ) button. ) button again. TV AV1 : ---- AV2 : ---- AV3 : ---- S-Video : ---- Component1 : ---- ➢ ▼ More Move Enter Return ◆ When you connect equipment to the TV, you can choose between the following sets of jacks : AV1, AV2, Component1 or Component2 on the TV’s rear panel, and AV3 or S-Video on the TV’s side panel. ◆ You can select these options simply by pressing the SOURCE ( ) button. Input TV Source List √ : TV Enter Return AV1 : - - - -- - - - √ AV2 : - - - VCR - √ AV3 : - - - DVD - √ S-Video : - -Cable - - STB √ - - HD - - STB Component2 : -Satellite --STB √ † Move Enter 7 Press the ▲ or ▼ button to select the external source to be edited. Press the ENTER ( ) button. The device names available are listed. Result: VCR - DVD - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver Game - Camcorder - DVD Combo DHR (DVD HDD Recorder) - PC. 8 Select the required device by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Return ➢ English - 52 The options available in the Input group are displayed again. Press the ▲ or ▼ button until the Edit Name is selected. Press the ENTER ( ) button. √ Component1 : ) button. 6 Edit Name TV Press the MENU ( Result: √ Edit Name Move 5 If you change the external source while viewing, pictures might take a short period of time to be switched. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 53 Playing a Disc Playback 1 Press the TV/DVD button to switch the DVD mode. 2 Press the OPEN/CLOSE ( ) button. 3 Place a disc gently into the tray with the disc’s label facing up. 4 Press the (Play/Pause) or OPEN/CLOSE ( ) button to close the disc tray. ☛ Disks with defect or copied illegally may not be played back by DVD player and may cause damage to the DVD system of your TV set. Stopping Playback Press the (Stop) button during playback. Removing Disc Press the OPEN/CLOSE ( ) button. Pausing Playback Press the (Play/Pause) button during playback, then screen stops and no sound. To resume, press the (Play/Pause) button again. It will pick up where you left off (unless the disc is removed, the (Stop) button is pressed twice or the set is unplugged.). ➢ ◆ If the player is left for 5 minutes in pause mode, it will stop. ◆ The “ ” icon indicates an invalid button press. Slow Motion Play (Except CD) Press the √√ (Forward search) button during pause. - By pressing the √√ (Forward search) button for a second during pause, you can select slow motion playback for 1/2, 1/4, 1/8 or 1/16 of normal speed. - No sound is heard during slow mode. - Press the (Play/Pause) button to resume normal playback. - When playing a VCD, the reverse slow motion play will not work. English - 53 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 54 Using the Search and Skip Functions Searching through a Chapter or Track Press the playback. (Forward search) or (Rewind search) button during - Press the (Forward search) or (Rewind search) button and press again to search at a faster speed (2X/4X/8X/16X/32X) on the DVD, VCD, CD. - To return to normal speed playback, press the button. ➢ (Play/Pause) When in search mode (2X/4X/8X/16X/32X) on a DVD or highspeed playback on a VCD, no sound will be heard. Skipping Tracks Press the (Next skip) or (Back skip) button during playback. - When playing a DVD, if you press the (Next skip) button, it moves to next chapter. If you press the (Back skip) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter. - When playing a CD, if you press the (Next skip) button, it moves to next track. If you press the (Back skip) button, it moves to the beginning of the track. One more press makes it move to the beginning of the previous track. - When playing a VCD 2.0 in MENU OFF mode, a VCD1.1 or a CD, if you press the (Next skip) button, it moves to next track. If you press the (Back skip) button, it moves to the the beginning of the track. One more press makes it move to the beginning of the previous track. - If a track exceeds 15 minutes when playing a VCD and you press the (Next skip) button, it moves forward 5 minutes. If you press the (Back skip) button, it moves backward 5 minutes. - When playing a VCD 2.0 in the MENU MODE or Track View function, if you press the (Next skip) button, it moves to the next menu or the next Track View display. If you press the (Back skip) button, it moves to the previous menu or the previous Track View display. English - 54 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 55 Playing a Disc (MP3/WMA) 1 Press the OPEN/CLOSE ( ) button. Place a disc gently into the tray with the disc’s label facing up. Press the (Play/Pause) or OPEN/CLOSE ( ) button to close the disc tray. MP3/JPG/MPG/WMA 00:00 00:00 001/007 \ 2 Press the … or † button to select the desired music folder, then press the ENTER ( ) or √ button. 3 Press the … or † button again to select a song file. Press the ENTER ( ) or (Play/Pause) button to begin play of the song file. 4 To play another song file of the same music folder, press the (Stop) button and press the … or † button to select a song file. Press the ENTER ( ) or (Play/Pause) button. To play another song file of another folder, press the œ button to move the music folder lists. Repeat Steps 2 to 3. music folder1 music folder2 music folder3 music folder4 music folder5 music folder6 MP3/JPG/MPG/WMA 00:23 03:40 128Kbps 003/006 \ music folder1\ music folder1 song1 song2 song3 song4 song5 When playing CD-R/MP3 discs, please follow the recommendations below: ◆ Your MP3 files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. These two formats are the most widely used. ◆ When naming your MP3 files do not exceed 8 characters, and place “.mp3” as the file extension. General name format of: Title.mp3. When composing your title, make sure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+). ◆ Use a decompression transfer rate of at least 128 Kbps when recording MP3 files. Sound quality with MP3 files basically depends on the rate of compression/decompression you choose. Getting audio CD quality sound requires an analog/digital sampling rate (conversion to MP3 format) of at least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely give better sound quality. Conversely, files with sampling rates below 128 Kbps will not be played properly. ◆ Do not try recording copyright protected MP3 files. Certain “securized” files are encrypted and code protected to prevent illegal copying. These files are of the following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered trademark of The SDMI Foundation). You cannot copy such files. ◆ Your DVD player only accepts one level of file directory. Consequently you must choose: - either to save all your MP3 recording files at the root of the disc; - and/or create folders in the directory for each artist or music type (e.g.classical, rock, jazz, etc) ◆ Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3 recordings, or as an assurance of sound quality. You should note that certain technologies and methods for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded sound quality and in some cases, inability of the player to read the files). ◆ This unit can play a maximum of 500 files and 300 folders per disc. English - 55 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 56 Playing a Disc (MPG) 1 Press the OPEN/CLOSE ( ) button. Place a disc gently into the tray with the disc’s label facing up. Press the (Play/Pause) or OPEN/CLOSE ( ) button to close the disc tray. 2 Press the … or † button to select the desired MPEG folder, then press the ENTER ( ) or √ button. 3 Press the … or † button again to select a MPEG file. Press the ENTER ( ) or (Play/Pause) button to begin play of the MPEG file. 4 To play another MPEG file of the same MPEG folder, press the (Stop) button and press the … or † button to select a MPEG folder. Press the ENTER ( ) or (Play/Pause) button. To play another MPEG folder of another folder, press the œ button to move the MPEG folder lists. Repeat Steps 2 to 3. MP3/JPG/MPG/WMA 00:00 00:00 001/007 \ MPEG folder1 MPEG folder2 MPEG folder3 MPEG folder4 MPEG folder5 MPEG folder6 MP3/JPG/MPG/WMA 00:00 00:00 003/007 \ MPEG folder1\ A/V A/V A/V A/V A/V MPEG folder1\ MPEG 1 MPEG 2 MPEG 3 MPEG 4 MPEG 5 MP3/JPG/MPG/WMA 00:00 00:00 003/007 \ MPEG folder1\ A/V A/V A/V A/V A/V MPEG folder1\ MPEG 1 MPEG 2 MPEG 3 MPEG 4 MPEG 5 English - 56 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 57 Playing a Disc (JPEG) Press the OPEN/CLOSE ( ) button. Place a disc gently into the tray with the disc’s label facing up. Press the (Play/Pause) or OPEN/CLOSE ( ) button to close the disc tray. MP3/JPG/MPG/WMA 00:00 00:00 003/007 \ picture folder1\ Rotating and Reversing the picture 1 Press the … or † button to select the desired picture file of the file list, then press the ENTER ( ) button. Result: ➢ picture folder1 picture1 picture2 picture3 picture4 picture5 The selected picture is displayed. If you want to return to the file list, press the button. 2 Press the œ or √ button to rotate the picture. 3 Press the … button repeatedly to reverse vertically. Press the † button repeatedly to reverse horizontally. (Stop) Slide Show Press the … or † button to select the desired picture file of the file list, then press the (Play/Pause) button. Result: ➢ Press ENTER key for DiscMenu It enters slide show mode. If you want to return to the file list, press the (Stop) button. Viewing the Album Screen 1 Press the DVD MENU button during slide show. Result: 2 The DVD menu is displayed with the Disc Menu is selected. Press the ENTER ( Result: ) button. It enters album screen mode. 3 To display the next or previous 12 pictures, press the skip) or (back skip) button. 4 Press the …/†/œ/√ button to select the desired picture, then press the (Play/Pause) button. Result: ➢ (next It enters slide show mode again. If you press the ENTER ( ) button after selecting the desired picture, the selected picture will be displayed only. English - 57 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 58 Using the Disc Menu 1 Press the DVD MENU button. Result: 2 ➢ The DVD menu is displayed with the Disc Menu is selected. Press the ENTER ( ) button. Depending on the disc, the Disc Menu may not work. Press ENTER key for DiscMenu Using the Title Menu 1 Press the DVD MENU button. Result: The DVD menu is displayed. 2 Press the … or † button to select Title Menu. 3 Press the ENTER ( ➢ ) button. ◆ The Title Menu will only be displayed if there are at least two titles in the disc. ◆ Depending on the disc, the Title Menu may not work. Press ENTER key for TitleMenu English - 58 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 59 Displaying the Disc Information 1 Press the DVD MENU button. The DVD menu is displayed. Result: 2 Press the … or † button to select Function. The options available in the Function group are Result: displayed. 3 Press the ENTER ( ) button. The Info menu is selected. Result: 4 Press the ENTER ( ) button again. Depending on the disc, the disc information will be Result: displayed. You can display by simply pressing the INFO ( ) button. 5 ➢ 01/01 Press the … or † button to select the required item. Press the œ or √ button to make the required setup, then press the ENTER ( ) button. 0:10:20 ➢ 6 Info Zoom Bookmark Repeat Program You may use the number buttons of the remote control to start play from a desired time. To make the screen disappear, press the INFO ( 03/40 ENG 5.1 Off ) button. To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters so that you can quickly find a specific passage. Allows playback of the film from a desired time. You must enter the starting time as a reference. Refers to the language of the film soundtrack. In the example, the soundtrack is played in English 5.1ch. A DVD disc can have up to eight different soundtracks. Refers to the subtitle languages available in the disc. You will be able to choose the subtitles language or, if you prefer, turn them off from the screen. A DVD disc can have up to 32 different subtitles. ➢ ◆ What is a Chapter? Each Title on a DVD is usually divided into chapters (similar to tracks on an audio CD). ◆ What is a Title? A DVD may contain several different titles. For example, if a disc contains four different movies, each might be considered a title. English - 59 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 60 Using the Zoom Function (DVD/VCD) 1 Press the DVD MENU button. Result: Info Zoom Bookmark Repeat Program 2 The DVD menu is displayed. Press the … or † button to select Function. Result: The options available in the Function group are displayed. 3 Press the ENTER ( 4 Press the … or † button to select Zoom. Press the ENTER ( button. Result: 2X The “ ) button. ) ” mark is displayed. 5 Press the ENTER ( ) button repeatedly to zoom in on (DVD or VCD: 2X, 3X, 4X, 1/2X, 1/3X, 1/4X in order). 6 Press the …/†/œ/√ button to select the part of the screen you want to zoom in on (2X/3X/4X). Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can select the Angle function. Press the ANGLE button. Press the œ or √ button to select the desired screen angle. To turn off the display, press the ANGLE button again. 1/9 English - 60 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 61 Using the Bookmark Function (DVD/VCD) This feature lets you bookmark sections of a DVD or VCD so you can quickly find them at a later time. 1 Press the DVD MENU button. Result: 2 The DVD menu is displayed. Press the … or † button to select Function. Result: The options available in the Function group are displayed. 3 Press the ENTER ( 4 Press the … or † button to select Bookmark. Press the ENTER ( ) button. 5 Press the œ or √ button to move to the desired bookmark icon. 6 When you reach the scene you want to mark, press the ENTER ( ) button. Result: Info Zoom Bookmark Repeat Program ) button. The icon will change to a number (1, 2, or 3). Recalling a Marked Scene Press the œ or √ button to select a marked scene. Press the (Play/Pause) button to skip to the marked scene. Clearing a Bookmark Press the œ or √ button to select the bookmark number you want to delete. Press the CANCEL button to delete a bookmark number. ➢ ◆ Depending on the disc, this function may not work. ◆ Up to three scenes may be marked at the same time. English - 61 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 62 Repeat Play Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. Info Zoom Bookmark Repeat Program 1 Press the DVD MENU button. Result: 2 Press the … or † button to select Function. Result: DVD Off Chapter Title Press the ENTER ( 4 Press the … or † button to select Repeat. Press the ENTER ( ) button. 5 Press the œ or √ button to select the chapter, title or A-B. Press the ENTER ( ) button. ➢ Off Track Disk A-B The options available in the Function group are displayed. 3 A-B VCD/CD The DVD menu is displayed. ) button. The DVD repeats play by chapter or title, the CD and VCD repeat play by track or disc. A-B Repeat 1 Press the œ or √ button to select A-. Press the ENTER ( ) button at the point where you want the repeat play to start. 2 Press the œ or √ button to select B. Press the ENTER ( ) button at the point where you want the repeat play to stop. If the title or track is completed before marking the end (B), the end of title or track becomes B automatically. ➢ 3 ➢ English - 62 To return to normal play, press the œ or √ button to select Off and press the ENTER ( ) button. Depending on the disc, this function may not work. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 63 Program Play (CD) 1 Press the DVD MENU button. Result: 2 The DVD menu is displayed. Press the … or † button to select Function. Result: The options available in the Function group are displayed. 3 Press the ENTER ( 4 Press the … or † button to select Program. Press the ENTER ( ) button. 5 Press the numeric buttons to select the first track to add to the program. Result: ) button. Press the …/†/œ/√ button to move the next tray. Follow the above instruction for programming. 7 Press the ➢ Program:Track (01-17) Selected numbers are displayed in the first track. 6 Result: Info Zoom Bookmark Repeat Program Exit NEXT (Play/Pause) button. The disc will be played in programmed order. Program:Track (01-17) Exit Start ◆ Depending on the disc, this function may not work. ◆ Press the (Stop) button twice to cancel program play during playback. ◆ Opening the tray by pressing the OPEN/CLOSE ( cancels program play. ) button English - 63 NEXT BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 64 Setting up the Language for Player Menu If you select the language for the player’s on-screen displays, it will come up automatically every time. Language Setup Display Setup Parental Setup : √ √ √ 1 Press the DVD MENU button. Result: 2 Press the … or † button to select Setup. Result: 3 Player Menu : English √ 4 PLAYER MENU LANGUAGE Player Menu : English Français Deutsch Español Italiano Nederlands English - 64 ➢ ) button. The Language Setup is selected. Press the ENTER ( Result: 5 The options available in the Setup group are displayed. Press the ENTER ( Result: LANGUAGE SETUP The DVD menu is displayed. ) button again. The Player Menu is selected. Press the ENTER ( ) button again. Press the … or † button to select the appropriate language, then press the ENTER ( ) button. ◆ This function depends on what languages are encoded on the disc and may not work with all DVDs. ◆ If the selected language is not recorded on the disc, the original pre-recorded language is selected. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 65 Setting up the Display Options 1 Press the DVD MENU button. Result: 2 The DVD menu is displayed. Language Setup Display Setup Parental Setup : Press the … or † button to select Setup. Result: The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the … or † button to select Display Setup. Press the ENTER ( ) button. Result: √ √ √ ) button. The options available in the Display Setup group are displayed. 5 Press the … or † button to select the required menu (Screen Messages, Black Level, or NTSC Disc Output). 6 Select the appropriate option by pressing the ENTER ( button. DISPLAY SETUP Screen Messages Black Level NTSC Disc Output : Off : Off : PAL ) or √ ◆ Screen Messages : On or Off. Use to turn on-screen messages on or off. ◆ Black Level : On or Off. Adjusts the brightness of the screen. ◆ NTSC Disc Output When outputting the NTSC Disc to the external device of NTSC system, select NTSC. For the PAL system, select PAL. Otherwise, there may be no color or abnormal color. DISPLAY SETUP Screen Messages Black Level NTSC Disc Output : Off : Off : PAL DISPLAY SETUP Screen Messages Black Level NTSC Disc Output : Off : Off : PAL English - 65 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 66 Setting up the Parental Control 1 Press the DVD MENU button. Result: Language Setup Display Setup Parental Setup : √ √ √ 2 Press the ENTER ( 4 Press the … or † button to select Parental Setup. Press the ENTER ( ) button. Result: 5 ➢ PARENTAL SETUP √ √ 6 RATING LEVEL Level 8 Adult Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Kids Safe 1 Press the … or † button to select Rating Level. Press the ENTER ( ) button. 2 Press the … or † button to select the level (e.g. Level 8) and press the ENTER ( ) button. Discs that contain Level 7 will now not play. Re-enter New Password - - - - English - 66 To cancel the rating level, select No in the Use Password pressing the √ button. About the Change Password; 1 Press the … or † button to select Change Password. Press the ENTER ( ) button. The Enter New Password is displayed. Result: 2 Enter your new password. The Re-enter New Password is displayed. Result: 3 Re-enter your new password to confirm. Enter New Password CHANGE PASSWORD The Rating Level and Change Password are displayed. About the Rating Level; CHANGE PASSWORD - - - - The options available in the Parental Setup group are displayed with the Use Password is selected. Select Yes by pressing the √ button to use a password. ➢ 8 The Enter Password is displayed. If you have lost your password, enter the master password (1369). Result: 7 ) button. Enter the default password (0000) by using the numeric buttons. Result: : Yes :8 The options available in the Setup group are displayed. 3 - - - - Use Password Rating Level Change Password Press the … or † button to select Setup. Result: CREATE PASSWORD Enter Password The DVD menu is displayed. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 67 Teletext Feature Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. ➢ Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ◆ Entering the page number ◆ Selecting a title in a list ◆ Selecting a colored heading (FASTEXT system) English - 67 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 68 Displaying the Teletext Information You can display Teletext information at any time on your television. Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing TV English - 68 ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service using the P or button. 2 Press the TTX/MIX ( ) button to activate the teletext mode. The contents page is displayed. It can be redisplayed Result: at any time by pressing the (index) button. 3 Press the TTX/MIX ( ) button again. The screen will be split into two. This Double Teletext Result: feature lets you view the actual broadcast and teletext information separately on the screen. 4 If you wish to display the actual broadcast at the same time as the teletext page, press the TTX/MIX ( ) button again. 5 Press the TV ( ) button to exit from the teletext display. BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 69 Selecting Display Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Press the... ◆ Hidden text (answers to quiz games, for example) (reveal) ◆ The normal screen (reveal) again ◆ A secondary page (sub-page) ◆ The broadcast when searching for a page (cancel) ◆ The next page (page up) ◆ The previous page (page down) ◆ Double-size letters in the: • Upper half of the screen • Lower half of the screen (size) • Once • Twice ◆ Normal screen • Three times ➢ TV To return to the normal display after using the reveal or size feature, press the TV ( ) button. English - 69 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 70 Selecting a Teletext Page You can enter the page number directly by pressing the numeric buttons on the remote control. TV 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold). Press it again to resume. 2 If the FASTEXT system is used by the broadcasting company, the different topics covered on a Teletext page are color-coded and can be selected by pressing the colored buttons on the remote control. Press the colored button corresponding to the topic that you wish to select; the available topics are given on the status line. Result: The page is displayed with other colored information that can be selected in the same way. 3 To display the previous or next page, press the corresponding colored button. 4 To display the subpage, see the following steps. ◆ Press the (sub-page) button. Result: The available subpages appear. ◆ Select the required sub-page. Sub-pages can be scrolled by pressing the or button. 5 English - 70 When you have finished, press the TV ( your normal broadcast. ) button to return to BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 71 Connecting to the External Devices Rear of the TV (Input/Output) ② VCR Decoder / Video game device ③ Video disc player ① Satellite receiver ➃ ① This end can be fitted with: ◆ Three RCA connectors (VIDEO + AUDIO-L and R) ② If you have a second VCR and wish to copy cassettes tape, connect the source VCR to IN 1 (or IN 2) and the target VCR to OUT so that you can redirect the signal from source VCR to target VCR. ③ If you have a decoder, connect the decoder to the VCR and the VCR to the television. ➃ When you wish to record a programme, connect the receiver to IN 1 (or IN 2) and the VCR to OUT so that you can redirect the signal from IN 1 (or IN 2) to OUT. ⑤ OUT is used for displaying the current picture to an external device. When you wish to record the current picture, connect the VCR to OUT. Side of the TV (Input) Camcorder Video disc player Video game device ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. English - 71 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 72 Connecting to the Audio Outputs ➢ The AUDIO-L and R connectors are used for equipment, such as an audio system or external amplifier (to take full advantage of the Surround sound effect). Rear of the TV Audio System/ External Amplifier English - 72 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 73 Connecting to the S-Video Input ➢ The S-VIDEO INPUT and AUDIO-L and R connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV ① and Camcorder VCR ① To play pictures and sound, both the S-VIDEO INPUT and AUDIO-L and R connectors must be used. English - 73 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 74 Connecting to the Digital Audio Input ➢ The DIGITAL AUDIO IN (OPTICAL IN or COAXIAL IN) connectors are used for equipment with a digital output (to take digital sound). Rear of the TV DVD or English - 74 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 75 Connecting to the Component Input Rear of the TV DVD DTV receiver ➢ The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i,576p, 1080i) English - 75 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 76 Connecting Additional Speakers ① ① The SURROUND SPEAKER OUT connectors are used for sound output to external speakers. - The factory default of SURROUND SPEAKER OUT SELECTION is set to INT. For sound output to external speakers, set to EXT. Sound to the internal speaker is off. ➢ ➢ To improve the sound quality, connect the: ◆ Red wire to the red terminal ◆ Black wire to the black terminal Speakers can be purchased separately. English - 76 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 77 Programming the Remote Control for Other Components Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). ➢ The remote control might not be compatible with all VCRs, DVD players and Cable boxes. 1 Turn off your VCR (Cable box or DVD). 2 Press the SELECT button to switch the remote control to the VCR (CATV or DVD) mode. ➢ VCR The remote control has five modes : TV, VCR, CATV, DVD and STB) 3 Press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD) code listed on next page for your VCR (Cable box or DVD). Example: To enter the code “6”, press 0, 0, and 6. To enter the code “76”, press 0, 7, and 6. 5 Press the POWER ( ) button. Your VCR (Cable box or DVD) should turn on. If it turns on, your remote control is now set correctly. ➢ 6 If it does not turn on, repeat steps above, but try one of the other codes listed for the brand of particular yours. Once your remote control is set up, press the SELECT button any time you want to use the remote control to operate VCR (Cable box or DVD). ➢ ◆ When your remote control is in the VCR, CATV, DVD or STB mode, the volume buttons still control your television’s volume. ◆ When your remote control is in the TV mode, the VCR or DVD control buttons (rewind, stop, play/pause and fast forward) still operate your VCR or DVD. English - 77 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 78 Programming the Remote Control for Other Components VCR Remote Control Codes Admiral 020 Marantz Aiwa 025 Marta Akai 004, 027, 032 Audio Dynamics 007, 026 MEI Memorex 007, 008, 018, 021, 026, 036, 037, 062 006 021 006, 021, 024, 025 Bell&Howell 018 MGA 034 Broksonic 022 Midland 005 Candle 002, 003, 006, 008, 015, 055 Minolta Canon 021, 056 Citizen 002, 003, 006, 008, 015, 055 Colortyme Craig 007 002, 024 Curtis Mathes 002, 007, 008, 017, 021, 025, 056, 064, Daewoo 003, 010, 011, 012, 013, 014, 015, 016 066 DBX 007, 026 Mitsubishi Montgomery Ward MTC Multitech NEC Optimus Panasonic Pentax 019, 041 019, 034, 041, 046 020 002, 025 002, 005, 025, 038 007, 008, 018, 026, 037, 062, 064 020 021, 056, 071, 072 019, 041 Dimensia 017 Pentex Research Dynatech 034 Philco Emerson 001, 003, 006, 021, 022, 025, 030, 032, Philips 034, 040, 047, 050, 052, 060, 063, 065, Pioneer 019, 026, 039, 053 066, 067, 069 Portland 015, 049, 055 Fisher Funai General Electric Go Video LG (Goldstar) Harman Kardon Hitachi Instant Replay JC Penny JVC Kenwood 018, 024, 028, 029, 048, 051, 061 PROSCAN 008 021, 036, 056, 059 021, 036 017 025 Quartz 018 002, 005, 017, 021, 056 Quasar 021, 056 002 Radio Shack/Realistic 006, 007, 008, 009, 010 007 034, 048, 056 RCA 019, 025, 041, 042 021 006, 018, 020, 021, 024, 025, 029, 002, 017, 019, 021, 035, 041, 043, 057, 068 Samsung 000, 001, 002, 003, 004, 005 002, 007, 018, 019, 021, 026, 037, 041, Sansui 026 054, 056 Sanyo 018, 024 007, 008, 018, 021, 026, 037 Scott 003, 047, 052, 067 007, 008, 018, 026, 037 Sears 006, 018, 019, 024, 028, 029, 041, KLH 070 Lioyd 025 Sharp 020, 034, 045, 015 Logik 038 Shimom 027, 033, 038, 058 LXI 025 Signature Magnavox English - 78 021, 036, 056, 059 048, 051 Sony 025 027, 033, 044 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 79 Programming the Remote Control for Other Components VCR Remote Control Codes (continued) Sylvania Symphonic Tandy Tashika Tatung Teac Technics Teknika TMK Toshiba 021, 025, 036, 056, 059 025 018, 025 Totevision Unitech Victor 037 Video Concepts 021 002 Vector Research 006 025, 037, 068 002, 006 007, 026 026 007, 026 002 Videosonic Wards 002, 003, 006, 019, 020, 021, 024, 025, 006, 021, 025, 031 066 003, 019, 029, 051, 052 034, 038, 041 Yamaha Zenith 007, 008, 018, 026, 037 023, 027, 033, 073 Cable Box (CATV) Remote Control Codes Anvision GI 017, 018 041 Regency 015, 023 SA 042, 043 Hamlin 003, 024, 031 Hitachi 025, 030 Scientific Atlanta Jerrold 038, 039 Sprucer 022 Macom 025, 030 Stargate 2000 036 019, 023, 028 Sylvania 016 026 Texscan 016 Magnavox Oak Panasonic 003, 022, 027, 037, 044 Samsung 000, 001, 002, 003, 004, 005, 006, 007 042, 043 032 Tocom Philips 019, 021, 023, 028 Universal 033, 034 Pioneer 004, 018, 020, 044 Viewstar 019, 021, 023, 028 RCA Regal 014, 022, 040 003 046 Wamer amex Zenith 017, 029, 035, 037, 045 DVD Remote Control Codes Samsung 000, 001 LG (Goldstar) 006 JVC 002 Sony 007 PROSCAN/RCA 003 Denon 008 Panasonic 005 Curtis Mathes 009 English - 79 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 80 Disc Type and Characteristics The DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size DVD Max. Playing Time Characteristics Single-sided: 240 min. - DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system. 5” Double-sided: 480 min. Audio + Video - Various screen and audio functions can be easily selected through the on-screen menu. Single-sided: 80 min. 31/2” Double-sided: 160 min. VIDEO-CD Audio + Video 5” 74 min. 31/2” 20 min. 5” 74 min. 31/2” 20 min. AUDIO-CD - Video with CD sound, VHS quality and MPEG-1 compression technology. - CD is recorded as a Digital Signal with better audio quality, less distortion and less deterioration of audio quality over time. Audio Disk Markings ~ NTSC PAL Play Region Number Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc. PAL broadcast system DTS disc Dolby Digital disc MP3 STEREO Stereo disc DCDi DIGITAL SOUND Digital Audio disc English - 80 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 81 Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the power switch toward “OFF” and the POWER ( ) button. ◆ Check the picture contrast and brightness settings. ◆ Check the volume. Normal picture but no sound ◆ Check the volume. ◆ Check whether the volume MUTE ( has been pressed. ) button on the remote control No picture or black and white picture ◆ Adjust the color settings. ◆ Check that the broadcast system selected is correct. Sound and picture interference ◆ Try to identify the electrical appliance that is affecting the television, then move it further away. ◆ Plug your television into a different mains socket. Blurred or snowy picture, distorted sound ◆ Check the direction, location and connections of your aerial. This interference often occurs due to the use of an indoor aerial. Remote control malfunctions ◆ Replace the remote control batteries. ◆ Clean the upper edge of the remote control (transmission window). ◆ Check the battery terminals. English - 81 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 82 Troubleshooting: Before Contacting Service Personnel (continued) Disc does not play. ◆ Ensure that the disc is installed with the label side facing up. ◆ Check the region number of the DVD. ◆ This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a DVD, a VIDEO-CD or a CD. 5.1 channel sound is not being reproduced. ◆ 5.1 channel sound is reproduced only when the following conditions are met. : 1) Check whether the proper amplifier is connected. 2) The disc is recorded with 5.1 channel sound. - Check whether the disc being played has the “Dolby 5.1 ch” mark on the outside. - Check if your audio system is connected and working properly. The “ ◆ The features or action cannot be completed at this time because : 1) The DVD’s software restricts it. 2) The DVD’s software doesn’t support the feature (e.g., angles). 3) The feature is not available at the moment. 4) You’ve requested a title or chapter number or search time that is out of range. ” icon appears on screen. Disc Menu doesn’t appear. ◆ Check if the disc has a Menu. Playback mode differs from the Setup Menu selection. ◆ Some of the functions selected in the Setup menu may not work properly if the disc is not encoded with the corresponding function. If you experience other problems. ◆ Go to the contents and find the section of the instruction book that contains the explanations regarding the current problem, and follow the procedure once again. ◆ If the problem still cannot be solved, please contact your nearest authorized service center. English - 82 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 83 Memo English - 83 BP68-00380A (J61A_Asia_ENG) 12/10/04 10:51 AM Page 84 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS BP68-00380A-01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 83 Page Mode : UseOutlines Page Layout : SinglePage Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:db7d2a6f-f4d0-4e5f-bd1e-c8e692fc043c Producer : Acrobat Distiller 5.0.5 for Macintosh Create Date : 2004:11:30 07:34:28Z Modify Date : 2004:12:10 15:57:28+09:00 Metadata Date : 2004:12:10 15:57:28+09:00 Creator Tool : QuarkXPress.. 4.1Eng: AdobePS 8.8.0 (301) Document ID : uuid:e2022001-ccb4-40a9-bd8a-16af1dfb69ba Format : application/pdf Creator : sook Title : BP68-00380A (J61A_Asia_ENG) Author : sookEXIF Metadata provided by EXIF.tools