Samsung BD UP5000 User Manual DVD PLAYER Manuals And Guides L0801367

SAMSUNG DVD Systems Manual L0801367 SAMSUNG DVD Systems Owner's Manual, SAMSUNG DVD Systems installation guides

User Manual: Samsung BD-UP5000 BD-UP5000 SAMSUNG DVD PLAYER - Manuals and Guides View the owners manual for your SAMSUNG DVD PLAYER #BDUP5000. Home:Electronics Parts:Samsung Parts:Samsung DVD PLAYER Manual

Open the PDF directly: View PDF .
Page Count: 68

Download
Open PDF In Browser	View PDF

key features of

f N@W

Player Features
Supports a Variety of Video Disc Types
Supports BD, HD DVD, DVD Video, DVD-RW/-R (V mode and finalizedonly).
HDMI (High Definition Multimedia Interface)
HDMi reduces picture noise by allowing a pure digital video/audio signal path from the player to your TV.
Simplay HD
Simplay HD guarantees that this player has been tested according to
specifications aimed at maximizing the deliveryof HD content.

Blu-ray

Disc

Features

Blu-ray Discs can store 25 GB (single layer)or 50 GB (dual layer)on a single sided disc - about 5 to 10 times the
capacity of a DVD. Blu-ray Discs also support the highest quality HD video available in the industry - Large capacity
means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar sizeand look as DVD.

HD DVD Features
HD DVD is the newest, high definition entry to the popular DVD format.
A HD DVD (duaNayer) disc can store up to 30 GB of data, and a single layer HD DVD can store up to 15 GB. On
one side of a single layer HD DVD, up to 8 hours of high resolution video source with 1125 scanning lines, and up to
48 hours of standard resolution with 525 scanning lines can be stored.
* The following BD/HD DVD Disc features are disc dependant and will vary.
Appearance and navigation of features will also vary from disc to disc.
Not all discs will have the features described below.
Video highlights
The BD-ROM/HD DVD-ROM format for movie distribution supports three highly advanced video codecs, including
AVC, VC-1, and MPEG-2.
HD video resolutions are also available:
• 1920x1080 HD
• 1280 x 720 HD
For High-Definition Playback
To view high-definition contents on a BD/HD DVD Disc, an HDTV (High DefinitionTelevision) is required.
Some BD/HD DVD discs may require using the player's HDMI OUT to view high-definition content. The ability to
view high-definition content on BD/HD DVD discs may be limited depending on the resolution of your TV.

2 English

Graphic planes
Two individual, full HD resolution (1920xl 080) video
layers are available, on top of the HD video layer.
One layer is assigned to video-related graphics (like
subtitles), and the other layer is assigned to interactive
elements, such as buttons or menus. Various wipes,
fades and scroll effects may be available on both layers.

[
Planes

Menu graphics
Support full color resolution graphics and animation,
thereby greatly surpassing the capabilities of DVD-Video.
Unlike DVD, Menus can be accessed during video
playback.
Menu sounds
When you highlight or select a menu option on a disc, sounds can be heard such as button clicks or a voice-over
explaining the highlighted menu choice.
Multi-page/PopUp
Menus
With DVD-Video, playback is interrupted each time a new menu screen
is accessed. Due to BD/HD DVD Disc's ability to preload data from the
disc without interrupting playback, a menu may consist of several
pages.
You can browse through the menu pages or select different menu
paths, while the audio and video remain playing inthe background.
Interactivity
With HD DVD, you can enjoy additional content such as animation on
menu options and the movie, simultaneous playback of main and
secondary movies using PIP (Picture-in-Picture), and the ability to download content via the Internet.
User Browsable Slideshows
With BD/HD DVD Discs, you can browse through various still pictures while the audio remains playing.
Subtitles
Depending on what is contained on the BD/HD DVD Disc, you may be able to select different font styles, sizes and
colors for the subtitles, Subtitles may also be animated, scrolled or faded in and out.
Multi-format System
The HD DVD twin-format disc consists of the HD DVD and DVD layers on a single side.
The HD DVD combi disc consists of the HD DVD and DVD layers on each side.
Internet Connection (LAN Port)
Some HD DVD discs are designed to access a web site,allowing you to view additional content on your player.

WHAT'S

INCLUDED

Check for the supplied accessories below.

English 3

, fetv nforrn t on
WARNING
TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLEPARTS ARE INSIDE. REFER SERVICING TO QUALIFIEDSERVICE PERSONNEL.

CAUTION

TOREDUCE
THERISKOFELECTRIC
Tile lightingflashandArrowhead
within CAUTION:
TriangleIsawarningsignalertingyouof SHOCK,
DONOTREMOVE
COVER
(ORBACK)
NO
USER
SERVICEABLE
PARTS
INSIDE.
REFER
dangerous
voltageInsidethe product
SERVICING
TOQUALIFIED
SERVICE
PERSONNEL.

Theexplanation
pointwithinthetriangle
isa warningsignalertingyouof
importantinstructions
accompanying
the product.

WARNING
• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
• To preventinju% thisapparatusmust be securelyattachedto the floor/wall inaccordancewiththe installationinstructions.
Note to CATV system installer
This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code
(Section 54 of Canadian Electrical Code, Part I)that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building as close to the point of
cable entry as practical.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment
Regulations.

CLASS 1 LASER PRODUCT
Use of controls, adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
THIS PRODUCT UTILIZESA LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCEOF
PROCEDURESOTHER THAN THOSE SPECIFIEDHEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICINGTO QUALIFIED
PERSONNEL.

safety

[ffo_mato[_

Note:
• Thisunitcanbeused
onlywhere
thepower
supply
isAC120V,
60Hz.
Itcannot
beused
elsewhere.
• ThisDuoHDplayer
isdesigned
andmanufactured
torespond
totheRegion
Management
Information.
IftheRegion
number
ofa BD/DVD
discdoesnotcorrespond
totheRegion
number
ofthisDuoHDplayer,
the
DuoHDplayer
cannot
playthedisc.
• Theproduct
unitaccompanying
thisuser
manual
islicensed
under
certain
intellectual
property
rights
ofcertain
thirdparties.
Thisproduct
iscovered
byoneormore
ofthefollowing
U.S.patents:
5,060,220
5,457,669
5,561,649
5,705,782
5,987,417
6,043,912
6,222,983
6,272,096
8,377,524
6,377,531
6,385,587
6,389,570
6,408,408
6,468,532
6,473,736
8,477,501
6,480,829
6,558,520
8,556,521
6,556,522
6,578,163
6,594,208
8,631,110
6,658,588
6,674,697
8,674,957
6,687,455
6,697,307
8,707,985
6,721,243
6,721,493
6,728,474
6,741,535
6,744,713
6,744,972
6,765,853
6,765,853
6,771,890
6,771,891
6,775,485
6,778,755
6,788,629
8,788,630
6,795,637
6,810,201
8,862,256
6,868,054
6,894,963
8,937,552
Thisproduct
iscovered
bythefollowing
U.S.patents:
US4,930,158
US4,930,160
Thislicense
islimited
toprivate
non-commercial
usebyend-user
consumers
forlicensed
contents.
Norights
aregranted
forcommercial
use.Thelicense
doesnotcover
anyproduct
unitother
thanthisproduct
unit
andthelicense
doesnotextend
toanyunlicensed
product
unitorprocess
conforming
toISO/IEC
11172-3
orISO/
IEC13818-3
used
orsoldincombination
withthisproduct
unit.
Thelicense
onlycovers
theuseofthisproduct
unittoencode
and/or
decode
audio
filesconforming
totheISO/IEC
11172-3
orISO/IEC
13818-3.
Norights
aregranted
under
thislicense
forproduct
features
orfunctions
thatdonot
conform
totheISO/IEC
11172-3
orISO/IEC
13818-3.
PRECAUTIONS
Important

Safety

Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep
theseoperatinginstructionshandyfor futurereference.
1)

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings, Install inaccordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)
that produce heat.

Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. Ifthe provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11 ) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.

English 5

s fetv nform t on
J

Handling

Cautions

• Before connecting other components to this Duo HD player, be sure to turn them all off.
• Do not move the Duo HD player while a disc is being played as the disc may be scratched or broken, or the Duo
HD player internal parts may be damaged.
•
•
•
•

Do not put a flower vase filled with water or any small metal objects on the Duo HD player.
Be careful not to put your hand into the disc tray.
Do not place anything other than the disc in the disc tray.
Exterior interference such as lightning and static electricity can affect normal operation of this Duo HD player. If
this occurs, turn the Duo HD player off and on again with the POWER button, or disconnect and then reconnect
the AC power cord to the AC power outlet. The Duo HD player will operate normally.
• Be sure to remove the disc and turn off the Duo HD player after use.
• Disconnect the AC power cord from the AC outlet when you don't intend to use the Duo HD player for long
periods of time.
• Clean the disc by wiping in a straight linefrom the inside to the outside of the disc.
• Do not expose the player to liquid.
• When the AC plug is connected to a wall outlet, the player will still draw power (standby mode) when it is turned
off.

Maintenance

of Cabinet

For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.

Restrictions

on Playback

• This player may not respond to all operating commands because some Blu-ray, HD DVD, DVD, CD discs allow
specific or limited operation and features during playback.
Please note that this is not a defect in the player.
• Samsung cannot assure that this player will play every disc bearing the Blu-ray, HD DVD, DVD or CD logo
because disc formats evolve, and problems and errors may occur during the creation of BD, HD DVD, DVD, CD
software and/or the manufacture of discs.
This player also operates differently than a standard DVD player or other AV equipment. Please contact the
SAMSUNG customer care center if you have questions or encounter difficulty in playing Blu-ray, HD DVD, DVD,
CD discs in this player. Also, refer to the rest of this Manual for additional information on playback restrictions.

safety

[ffo_mato[_

contents
KEY FEATURES

OF YOUR

SAFETY

NEW DUO
HD PLAYER

INFORMATION
ii

GETTING

STARTED

What's included

4
5

Warning
Precautions

9
10
13

Before Reading the User's Manual
Disc Type and Characteristics
Disc Storage & Management

DESCRIPTION

REMOTE

Front Panel

iii

14
15

Front Panel Display
Rear Panel

CONTROL

Tour of the Remote Control

18
18
19

Setting the Remote Control
Regarding the Battery
Controllable TV Codes

20
21

Connecting to a TV with an HDMI Cable
HDMI Auto Detection Function

22
23
24

Connecting
Connecting
Connecting

25
26

Connecting to a TV(Video)
Connecting to an Audio System (2 Channel
Amplifier)
Connecting to an Audio System (7.1
Channel Amplifier)

CONNECTIONS

BASIC

FUNCTIONS
OF YOUR
DUO HD PLAYER
ii

to a TV with DVl Cable
to a TV (Component)
to a TV (S-Video)

Connecting to an Audio System (Dolby
Digital, DTS Amplifier)

Connecting to an Audio System (HDMI
supported Amplifier)

Connecting

31
32

Before Playing
On-Screen Menu Navigation

32
33
33
34

Playing a Disc
To play a twin-format HD DVD disc
Using the Search and Skip Functions
Slow Motion Play/Step Motion Play

to the Internet

SYSTEM

SETUP

Setting the Clock

LANGUAGE

SETUP

Setting up the Language Options

English 7

oontents
AUDIO

SETUP

37
39

Setting up the Audio Options
Setting up the Speaker Options

DISPLAY

SETUP

Setting up the Video display/output

Setting up the HDMI setup options

Options

ii
ii

HDMI

SETUP
ii

PARENTAL

SETUP

Setting up the Parental Lock

NETWORK

SETUP

47
48
48

TCP/IP Setting
Proxy Setting
Cookie Setting

49
49
49

Network Throughput
NTP Server Setting
Mac Address

System Device Management

UPGRADE

Firmware Upgrade

System Information

54
55
56
57
58

Using the Display Function
Using the Disc Menu & Popup/Title
Repeat Play
Selecting the Audio Language
Selecting the Subtitle Language

59
59
60
60
61

Changing the Camera Angle
Using the Cursor Function
Playing an Audio CD(CD-DA)
Audio CD(CD-DA) Screen Elements
Buttons on the Remote Control used for
Audio CD (CD-DA) disc playback

PERSISTENT
STORAGE
MANAGEMENT

SYSTEM

WATCHING

A MOVIE
ii

LISTENING

TO MUSIC

TROUBLESHOOTING

APPENDIX

contents

Repeat Audio CD(CD-DA)

Troubleshooting

Specifications

aett na started
BEFORE READING THE USER'S

MANUAL

Make sure to check the following terms before reading the user manual.

Icons that will be used in manual

BD_ROM

This involves a function availableon a BD-ROM.

HD DVD:IRoM This involves a function availableon a HD DVD-ROM.

About

DVD-VIDEO

This involves a function availableon DVD-Video or DVD-R/DVD-RW discs
that have been recorded and finalized in Video Mode.

BVD:A%

This involves a function availableon DVD-RW. (V mode and finalized only)

DVD:A

This involves a function availableon DVD-R. (V mode and finalized only)

_,udioCD

This involves a function availableon a data CD-R (CD-DA format).

Note

This involves tips or instructions on the page that help each function
operate.

the use of this user's

manual

1) Be sure to be familiar with Safety Instructions before using this product. (See pages 4-6)
2) Ifa problem occurs, check the Troubleshooting. (See pages 63-64)

Copyright
@2007 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user's manual may be reproduced or copied without the
prior written permission of Samsung Electronics Co.,Ltd.

IEngfish 9

aett na started
DISC TYPE AND CHARACTERISTICS
Disc types that can be played

AUDIO+ VIDEO

Singleslded(25GB,
5 inches)
Doublesided(5OGB,
5 inches)

HDDVD-ROM

AUDIO+ VIDEO

Playingtimedepends
onthe Title

Singlesided(15GB,
5 inches)
Doublesided(3OGB,
5 inches)

DVD:VIDEQ

AUDIO-CD

AUDIO+ VIDEO

AUDIO

Singlesided(5inches)

24O

Doublesided(5inches)

48O

Singlesided(31/2inches)

Doublesided(31/2inches)

160

Singlesided(5inches)

Singlesided(31/2 inches)

DVD#iW
6/modeand
finalizedonly}
DVD_R
6/modeand
finalizedonly}

AUDIO+ VIDEO 5 inches(4.7GB)

AUDIO+VIDEO 5 inches(4.7GB)

48O
(EX: Extended
Play)

480
(EX: Extended
Play}

• This player is compatible with the NTSC color system only.
• PAL discs will not play.

Logos

of Discs that can be played

'_ Whenplayinga DolbyTrueHDdisc,audiowill onlybeheardoverthe frontleft andrightspeakers,

10 getting stabted

Discs that cannot

be played

• Blu-rayDiscswith a regioncode otherthan "RegionA".
• BD-R, BD-RE
• DVD-Videowith a regionnumber otherthan "1" or "ALL"
• HD DVD-R
• DVD-RAM

• 3.9 GB DVD-RDisc for Authoring.
• DVD-RW(VRmode)
• DVD-ROM/PD/MV-Disc,etc
• CVD/OD-ROM/OD-RW/CDV/CD-G/CDq/LD

[Note]
• Some commercial discs and HD DVD/DVD discs )urchased outside your region may not be playable
with this product. When these discs are played, either "No disc." or "Please check the regional code
of the disc." will be displayed.
• If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.
• The unit cannot play CD-R and DVD-RW/-R recorded content such as divx, avi, mpg, mov, wma,
mp3,dJgital photo view(JPEG) file.

Region

code

Both the Duo HD player and the discs are coded by region. These regional codes must match in order
to play the disc. Ifthe codes do not match, the disc will not play.
The Region Number for this Duo HD player is described on the rear panel of the Duo HD player.

DiscType

Blu-ray

Regon code

BDRegionCode
A

DVD-VIDEO

Area
I North
America,
Central
America,
South
America,
Korea,
Japan,
Taiwan,
Hong
K0ng
andSouth
East
Asia.
I

Europe,
Greenland,
Frenchterritories,MiddleEast,Africa,Australia
andNewZealand.

nda, Chna, Russa, CentraandSouthAsa.

DVDRegionCode
1

Area
TheU.S.,U.S.territories
andCanada

Europe,
Japan,
tileMiddle
East,
Egypt,
South
Africa,
Greenland

Taiwan,
Korea,
thePhilippines,
Indoneda,
Hong
Kong

Mexico,
South
America,
Central
America,
Australia,
NewZealand,
Pacific
Islands,
Caribbean

Rusda,
Eastern
Europe,
india,
mostofAfrica,
North
Korea,
Mongolia

China

• HD DVDs do not currently have Region codes. They however, may be assigned in the future.

Blu-ray

Disc Compatibility

Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all
discs are compatible and not every disc will play back. For additional information, refer to the
Compliance and Compatibility Notice section of this Manual. If you encounter compatibility problems,
please contact the SAMSUNG customer care center. This Samsung Duo HD player (BD-UP5000)
supports only the BD-ROM Profile 1 version 1.0 specification. If you want to play later version discs, you
may need to update player's firmware. Please refer to http://st,Nw.samsung.com/us or contact
SAMSUNG customer care center at 1-800 SAMSUNG.

IEnglish 11

aett na staffed
HD DVD Disc Compatibility
HD DVD is a new format, disc compatibility issues with new and existing format discs are possible.
Not all discs are compatible. If you experience compatibility problems, please contact SAMSUNG
Customer Service.

Playbackmaynotworkfor sometypesof discs,or whenspecificoperations,suchas anglechangeandaspect
ratioadjustment,arebeingperformed.Information
aboutthe discsiswrittenindetailonthe box.Pleaserefer
to thisif necessary.
_ Donotallowthe discto becomedirtyor scratched.Fingerprints,
dirt,dust,scratchesor depositsofcigarette
smokeonthe recordingsurfacemaymakeit impossibleto usethe discfor playback.
_ DiscswithPALprogramsrecordedon themcannotbe playedusingthis product.
_ Whena BD-Java
titleis played,loadingmaytakelongerthana normaltitle,or somefunctionsmayperfoNnslowly.
_ Disks that are embedded with the networking features can display a download loading
message in addition to the disk loading message at the start.

Disc Types
.t. BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM
may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for
playback on Duo HD player's. This unit can play back pre-recorded commercial BD-ROM discs.
¢ HD DVD
• HD DVD or High-Definition DVD is a high-density optical disc format designed for the storage of
data and high-definition video.
• HD DVD has a single-layer capacity of 15GB and a dual-layer capacity of 30GB.
¢ DVD-Video
• A digital versatile disc (DVD)can contain up to 135-minutes of images, 8 audio languages and 32
subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digitalsurround,
allowing you to enjoy vivid and clear theatre quality images.
• When switching from the first layer to the second layer of a dual-layered DVD Video disc, there
may be momentary distortion in the image and sound. This is not a malfunction of the unit.
• Once a DVD-RW/-R recorded in Video Mode is finalized, it becomes DVD-Video. Pre-recorded
(pre-stamped) commercial DVDs with movies are also referred to as DVD-Videos. This unit can
play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.
•**oAudio CD
• An audio disc on which 44.1kHz PCM Audio is recorded.
• This unit can play back CD-DA format audio CD-R discs.
• The unit may not be able to play some CD-R discs due to the condition of the recording.
•***CD-R
• Use a 700MB(80 minutes) CD-R disc. If possible, do not use a 800MB(90 minutes) or above disc,
as the disc may not play back.
• If the CD-R disc was not recorded as a closed session, you may experience delays when playing
back the beginning of the disc or all recorded files may not play.
• Some CD-R discs may not be playable with this unit, depending on the device which was used to
burn them. For contents recorded on CD-R media from CDs for your personal use,playabilitymay
vary depending on contents and discs.
¢ DVD-R Disc Playback
• Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video.
• This unit can playback DVD-Rdiscs recorded and finalizedwith a Samsung DVDvideo recorder. It may
not be able to playsome DVD-Rdiscs dependingon the disc and the condition of the recording.

12 getting sta_ted

o_oDVD-RW Disc Playback
• Playback can be performed with DVD-RW discs in the Video Mode and finalized only.
• Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video.Ability to play back
may depend on recording conditions.

Disc Format
o**o
DVD-RW/-R
(V)
• This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be
played by this Duo HD player once it has been finalized.
• If a disc that has been recorded in Video Mode by a different maker's recorder but has not been
finalized, it cannot be played by this Duo HD player.

DISC

STORAGE

& MANAGEMENT

Disc Handling
• Use discs with regular shapes. If an irregular disc (a disc with a special shape)
is used, this Duo HD player may be damaged.

GO x

o,*o
Holding discs
• Avoidtouchingthe surfaceof a disc whererecordingis performed.
Blu-ray/HD
DVD Discs
• If the player is not used for a long period of time, remove the Blu-ray/HD
DVD Disc from the player and store it in its case.
• Be careful not to leave fingerprints or scratches on the surface of the Blu-ray/HD DVD Disc.
o**o
DVD-RW

and DVD-R

• Clean with an optional PD disc cleaner (LF-K200DCA1 where available).Do not use cleaners or
cloths for CDs to clean DVD-RW/-R discs.

DVD-Video, Audio-CD
• Wipeoff dirt or contaminationon the discwith a soft cloth.
Cautions on handling discs
• Do not write on the printed side with a ball-point pen or pencil.
• Do not use record cleaning sprays or antistatic. Also, do not use volatile
chemicals, such as benzene or thinner.
• Do not apply labels or stickers to discs. (Do not use discs fixed with exposed
tape adhesive or leftover peeled-off stickers.)
• Do not use scratch-proof protectors or covers.
• Do not use discs printed with label printers availableon the market.
• Do not load warped or cracked discs.

Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
• Ifyou move your Duo HD playersuddenly from a cold place to a warm place,condensation may generate
on the operating parts and lens and cause abnormaldisc playback. If this occurs, wait for two hours before
connecting the plug to the power outlet. Then insert the disc and try to playback again.

IEnglish 13

description
I

FRONT PANEL

DISCTRAY

Opensto accepta disc,

OPEN/CLOSE
BIJI-rON

Opensandclosesthedisctray,

REMOTE
CONTROL
SENSORDetectsanysignalfromtheremotecontrol,

Playsa discor pausesplayback,

STOPBtlrroN

SEARCH/SKIP
BUTIONS Goesto the nexttitle/chapter/track
or goesbacktothe previous
title/chapter/track,

FRONT

PLAY/PAUSEBIJI-rON

DISPLAY

Stopsdiscplayback,

Displays
theplayingstatus,time,etc,

STANDBYINDICATOR

Whentheunitisfirst pluggedin,thisindicatorlights,

POWERBUI-rON

TurnstheDuoHDplayeronandoff,

PANEL

DISPLAY
Title/PlayListiTrack
indicator,
Playing
tirne/cloctdcurrent
status
indicator,
Disctypeindicators,
[_

Videooutputresolution
indicator,

Pauseindicator,
Playback
indicator,

REAR PANEL

Fan

Connectto a7.1CHanaloginputonanA/Vamplifier
{ H/
_z_

7,16HANALOG
AUDIOOUT

(Whenconnecting
toa 5.1 channelhometheateror receiver,connectall theAnalog
Audiooutputjacksfromtheplayerexceptforthe SurroundBackLeft/Surround
Back
Rightoutputs)

AUDIOouT

Connects
to theaudioinputofexternalequipmentusingaudiocabbs.

[3]

VIDEOOUT

Connects
the inputof externalequipment
usingavideocable.

[4 i COMPONENT
_J
VIDEOOUT
_/DIGITAL AUDIOOUT
_
(COAXIAL)Connects

v j
7]

Connects
to equipment
havingComponent
videoinput.

to anamplifierhavingadigitalcoaxialaudioinputjack.

D,G,TALAUD,O
out
(OPTICAL)

Connects
to anamplifierhavingadigitalopticalaudioinputjack.

I.AN

Usea networkthatis connected
to theInternet.

___} HI)M!OH

UsetheHDMIcable,connectthisHDMIoutputterminaltothe HDMIinputterminalon
your]V forthebestqualitypicture.

I9]

Connects
the inputof externalequipment
usinganS-Videocable.

S-VIDEOOUT

IEnglish 15

,-I

Installing batteries in the Remote Control

O
C

O
"11

-1m
1. Lift the Cover at the back of the
remote control upward as shown:

Install two AAA size batteries,
Make SUre to match the '!+" and "-!' ends
Of the batteries With the diagram inSide

Replace the Cover.
AsSUming typical W USagelthe batteries
last for about One yearl

O
m

O
z

OPEN/CLOSE
Buttons I
To open and close the disc tray.

O
I--

POWER Button

NUMBER Buttons

CANCEL Button

SLOW Button
Eachtime thisbuttonis pressed,the discwill playslowly.

REVERSE/FORWARD SKIP Buttons
Pressto skipbackwardsor forwards.
REVERSE/FORWARD SEARCH Buttons
Pressto searcha discbackwardsor forwards.

TV INPUT SEL. Button
After setup, allows you to set the input source on your TV.
When the TV INPUT SEL. button is selected on the remote
control, the DIRECTION(up/down/lefVright) and ENTER
buttons operate your TV's menu screen, but not the player.
To enable the remote to control the Duo HD Player again,
press the RETURN button.

STEP Button
Eachtimethis buttonis pressed,a new framewill appear.
STOP Button
Pressto stop a disc.
PLAY/PAUSE Button
Pressto play/pausea disc.

,-i 4-

TV VOL Buttons I
TVvolumeadjustment

MENU Button
Bringsup the Duo HDplayer'ssetupmenu.

ENTER/DIRECTION

1TV CH Button
Usethis to selecta TVprogram.

t TV MUTE Button
Mutes tile speakers of your TV.

Buttons
RETURN Button

INFO Button
Displayscurrentsettingor disc status.

EXIT Button

DISC MENU Button
Usethis to enterthe discmenu.
POPUP MENU/TITLE MENU Button
Usethisto enterthe popupmenu/titlemenu.
COLOR Buttons : RED(A), GREEN (B),
YELLOW(C), BLUE(D)

AUDIO Button
Use this to access various audio functions on a disc
(BD/HD DVD!DVD).

RESUME PLAY Button I

t REPEAT A-B Button
Allowsyou to repeatplaybackof a certainsection.

CURSOR Button
Usethe eightdirectionbuttonsto movethe cursor.

You can resumeplayingfrom the laststopped point.

_qq
B
Q

SUBTITLE
Button I
Press this to switch the BD/HD DVD/DVD's
subtitle language.

t REPEAT Button
Allowsyou to repeata title,chapter,trackor disc.

SETTING

THE REMOTE

CONTROL

You can control certain functions of your TV with this remote control.
Control function buttons include : TV POWER, CH AV, VOL + -, TV MUTE, TV INPUT SEL., DIRECTION/
ENTER button. However, the DIRECTION/ENTER button can only operate when the TV INPUT SEL. button has
been selected.

To
1.
2.
3.

determine whether your television is compatible, follow the instructions below.
Switch your television on.
Point the remote control towards the television.
Press and hold the TV POWER button and enter the two-figure code corresponding to the brand of
your television, by pressing the appropriate number buttons. (see the next page for the code list).
Ifyour television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.

If severalcodesareindicatedforyourtelevisionbrand,try eachoneinturn untilyoufind onethatworks.
If youreplacethe remotecontrol'sbatteries,you mustsetthe brandcodeagain.

You can then control the television using the following buttons after pressing the TV button.
Button
IV POWER

Function
Usedto switchthetelevision
onandoff.

IV INPUT
SEL.

Usedto selectan externalsource.

IV VOL(+ -)

Usedto adjustthe volumeofthetelevision.

IV OH(^V)

Usedto selectthe desiredchannel.

IV MUTE

Usedto togglethesoundonandoff.
Usedto moveup/down/left/right
(A, v, .q, I_) andtoselectadesireditem.
DIRECTION!ENTER *(onlyworksunderthe R/INPUTSEL.buttonselected)

Thefunctionslistedabovewill not necessarily
workonall televisions.Ifyouencounterproblems,operatethe
televisiondirectly.

REGARDING
If
•
•
•
•

THE

BATTERY

the remote does net operate properly:
Check the polarity+ - of the batteries(Dry-Cell)
Check if the batteriesare drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lightingnearby.

Dispose of batteries according to local environmental regulations. Do not put them in the
household trash.

18 [emote cent[el

CONTROLLABLE

SAMSUNG
AIWA
ANAM
BANG & OLlJFSEN

TV CODES

TV POWER+01, +02, +03, +04, +05, +06, +07, +08, +09
TV POWER+82
TV POWER+10, +11, +12, +13, +14, +15, +16, +17, +18
TV POWER+57

BLAUPUNKT

TV POWER+71

BRANDT

TV POWER+73

BRIONVEGA

TV POWER+57

CGE

TV POWER+52

CONTINENTAL EDISON

TV POWER+75

DAEWOO
EMERSON
FERGUSON
FINLUX

TV POWER+19, +20, +23, +24, +25, +26, +27, +28, +29, +30, +31, +32, +33, +34
TV POWER+64
TV POWER+73
TV POWER+06, +49, +57

FORMENTI

TV POWER+57

FUJITSU

TV POWER+84

GRADIENTE

TV POWER+70

GBUNDIG
HITACHI
IMPERIAL
JVC
LG

TV POWER+49, +52, +71
TV POWER+60, +72, +73, +75
TV POWER+52
TV POWER+61, +79
TV POWER+06, +19, +20, +21, +22, +78

LOEWE

TV POWER+06, +69

LOFWE OPTA

TV POWER+06, +57

MAGNAVOX

TV POWER+40

METZ

TV POWER+57

MITSlJBISHI
MIVAR

TV POWER+06, +48, +62, +65
TV POWER+52, +77

NEC

TV POWER+83

NFWSAN

TV POWER+68

NOBLEX

TV POWER+66

NOKIA

TV POWER+74

NORDMENDE

TV POWER+72, +73, +75

PANASONIC

TV POWER+53, +54, +74, +75

PHILIPS

TV POWER+06, +55, +56, +57

PHONOLA

TV POWER+06, +56, +57

PIONEER

TV POWER+58, +59, +73, +74

RADIOLA

TV POWER+06, +56

RADIOMARELLI
RCA
REX
SABA
SAIORA
SANYO
SCHNEIDER

TV POWER+57
TV POWER+45, +46
TV POWER+74
TV POWER+57, +72, +73, +74, +75
TV POWER+74
TV POWER+41, +42, +43, +44, +48
TV POWER+06

SELECO

TV POWER+74

SHARP

TV POWER+36, +37, +38, +39, +48

SIEMENS

TV POWER+71

SINGER

TV POWER+57

SINUDYNE

TV POWER+57

SONY
TELFAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA

TV POWER+35, +48
TV POWER+73
TV POWER+67, +73, +75, +76
TV POWER+72, +73, +75
TV POWER+80, +81
TV POWER+47, +48, +49, +50, +51, +52

WEGA

TV POWER+57

YOKO

TV POWER+06

ZENITH

TV POWER+63

IEnglish 19

This section involves various methods of connecting
external components such as a TV,

CONNECTING

the Duo HD player to other

TO A TV WITH AN HDMI CABLE

1. Using an HDMI-HDMI cable (not included) connect the HDMI OUT terminal on the rearof the Duo HD player to
the HDMI IN terminal of your TV.
2. Press the input selector on your TV remote control until the HDMI signal from the Duo HD player appears on
your TV screen.
• Ifyou have set the remote control to properly operate with your TV (see pages 18-19), press the TV INPUT
SEL. button on the remote control and select HDMI as the external source of the TV.

c(x_nect oils

If the HDMIcableis connectedor removedduringplaybackof a CDDA,the playerwill stop playing.

HDMI AUTO DETECTION

FUNCTION

The player's video output will automatically change to HDMI output resolution when connecting an HDMI cable
while power is on (see page 42).

DependingonyourTV,certainHDMIoutputresolutionsmaynotwork.
Pleasereferto the user'smanualof yourTV.
Ifan HDMIor HDMI-DVlcableis connectedfrom the playerto a TV,the DuoHDplayer'soutputis setto HDMI/
DVloutputresolutionautomatically
within10 seconds.
If Component
andHDMIarebothconnected,HDMImodeis automaticallyselected.(Seepage42)
Whenyouconnectthe playerto the TVusingthe HDMIcablefor thefirst time or to a newTV,the HDMIoutput
resolutionwill beautomaticallysetto the highestprovidedbythe TV.
IfyouconnectaSamsungTVto the DuoHDplayerusingan HDMIcable,the playercanbe easilyoperated
usingthe TVremotecontrol.(Thisis onlyavailablewithSamsungTVsthatsupportthe Anynet+feature.)(See
pages43-44)

• HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
Using HDMI, the Duo HD player transmits a digital video and audio signal and displays a vivid picture
on a TV having an HDMI input jack.
• HDMI connection description
HDMI connector - Supports video and digital audio data (LPCM or Bitstream).
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP (High-bandwidth DigitalContent Protection), random noise
appears on the screen.
• Why does Samsung use HDMI?
Analog TVs require an analog video/audio signal. However, when playing a BD/HD DVD/DVD,the
data ransmitted to a TV is digital. Therefore either a digital-to-analog converter (in the Duo HD player)
or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is
degraded due to noise and signal loss. HDMI technology is supedor because it requires no D/A
conversion and is a pure digital signal from the player to your TV.
• What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting BD/HD DVD/DVD
content outputted via HDMI from being copied. It provides a secure digital link between a video
source (PC, DVD. etc) and a display device (TV, projector, etc). Content is encrypted at the source
device to prevent unauthorized copies from being made.
• What is Anynet+?
Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the
Anynet+ feature.
- If your Samsung TV has an €l_y,,et÷logo, then it supports the Anynet+ function.
- If you turn on the player and insert a disc, the player will start playing the disc, and the TVwill turn on
automatically and switch to HDMI mode.
- If you turn on the player and press the Play button with a disc already inserted,the TV will
immediately turn on and switch to HDMI mode.

IEnglish 21

CONNECTING

TO A TV WITH

DVl CABLE

1. Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the Duo HD player to
the DVl IN terminal of your TV.
2. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rearof the Duo HD player to
the AUDIO (red and white) IN terminals of your TV.
Turn on the Duo HD player and TV.
3. Press the input selector on your TV remote control until the DVIsignal from the Duo HD player appears on your
TV screen.
• Ifyou have set the remote control to properly operate with your TV (see pages 18-19), press the TV INPUT
SEL button on the remote control and select HDMI as the external source of the TV.

Connecting the HDMI cable while the Duo HD player's power is on, the player's video output will automatically
change to HDMI mode (see page 42).

Dependingon yourTV,certainHDMIoutputresolutionsmaynot work.
Pleasereferto the user'smanualofyourTV.
If anHDMIor HDMI-DVlcableis pluggedintoTV,the DuoHDplayer'soutputresolutionis setto HDMI/DVl
automatically
within 10 seconds.
If Component
andHDMIarebothconnected,HDMImodeis automaticallyselected.(Seepage42)
Whenyouconnectthe playertothe TVusingthe HDMIcableforthe firsttime or to a newTV,the HDMIoutput
resolutionwill be automaticallysettothe highestprovidedbytheTV
Ifthe HDMIcableis connectedor removedduringplaybackd a CDDA,the playerwill stop playing.

AUDIO IN DVIIN
Red

22 conr_ections

White

CONNECTING

TO A TV (COMPONENT)

Connecting to your TV using Component video cables
You will enjoy high quality and accurate color reproduction images Component video separates the picture
element into black and white(Y) blue(PB) red(PR)signals to present clear and clean images (Audio signals are
delivered through the audio output.)
1

UsingC_mp_nentvide_cab_es(n_tinc_uded)
c_nnectthec_MP_NENTv_DE__UTtermina_s_ntherear_f
the Duo HD player to the COMPONENT IN terminals of your TV

Using the audio cables connect the AUDIO (red and white) OUT terminals on the rear of the Duo HD player to
the AUDIO (red and white) IN terminals of your TV Turn on the Duo HD player and TV

Press the input selector on your TV remote control until the Component signal from the Duo HD player appears
on the TV screen
• Ifyou have set the remote control to properly operate with your TV (see pages 18-19) press the TV INPUT
SEL button on the remote control and select COMPONENT as the external source of the TV

Dependingonthe manufacturer,
the componentterminalson yourTVmaybemarked"R-Y,B-Y,Y" or "Cr,
Cb,Y" insteadof "Pr,Pb,Y",The numberandpositionofterminalsmayvarydependingonthe TVset. Please
refertothe user'smanualofyourTV.
Youcanselectfrom a varietyof resolutionsettingssuchas 1080i,720p,480p and480i,dependingonthe
disctype,(Seepage42)
Theactualresolutionmaydifferfromthe settinginthe SETUPmenuif bothComponentandHDMIcablesare
connected.The resolutionmayalsobedifferentdependingonthe disc,(Seepage42)
InDVDplayback,if bothHDMIandComponent
jacksareconnectedandyouselectthe Component
mode,the
DisplaySetupmenuwill showthe outputresolutionas 1080p,Theresolutionisactually480i,

En_lish 23

CONNECTING

TO A TV (S-VIDEO)

- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C)
signals to present clearer images than regular video input mode.
(Audio signals are delivered through the audio output.)
1. Using an S-Video cable (not included), connect the S-VIDEO OUT terminal on the rear of the Duo HD player to
the S-VIDEO IN terminal of your TV.
2. Using the audio cables, connect the AUDlO (red and white) OUT terminals on the rearof the
Duo HD player to the AUDIO (red and white) IN terminals of your TV. Turn on the Duo HD player and TV.
3. _re__ the input se_ect_r_n y_ur TV rem_te c_ntr__unti_the S-Vide_ _igna_fr_m the Du_ HD p_ayerappears _n
your TV screen.
• Ifyou have set the remote control to properly operate with your TV (see pages 18-19), press the TV INPUT
SEL. button on the remote control and select S-VIDEO as the external source of the TV.

AUDIO IN

24 conr_ections

S-VIDEO IN

TheS-VIDEO
sourceis alwaysoutputin480i resolutionregardlessofthe resolutionsetinthe SETUPmenu.
(Seepage42)

CONNECTING

TO A TV(VlDEO)

1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Duo HD player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.
2. Turn on the Duo HD player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Duo HD player appears on the
TV screen.
• Ifyou have set the remote control to properly operate with your TV (see pages 18-19), press the TV INPUT
SEL button on the remote control and select VIDEO as the external source of the TV.

Noisemaybe generatedif the audiocableis placedtoo closeto the powercable.
Ifyouwantto connectto anAmplifier,pleasereferto the Amplifierconnectionpages.(Seepages26-29)
ThenumberandpositionofterminalsmayvarydependingonyourTVset.Pleasereferto the user'smanualof
yourTV.
Ifthereis oneaudioinputterminalon the TV,connectit to the [AUDIOOUT][left](white)terminalofthe DuoHD
player.
TheVIDEOsourceis alwaysoutputin480i resolutionregardlessof the resolutionset inthe SETUPmenu.
(Seepage42)

English 25

CONNECTING

TO AN AUDIO SYSTEM (2 CHANNEL

AMPLIFIER)

1. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rearof the Duo HD player to
the AUDIO (red and white) IN terminals of your Amplifier.
2. Using the vide_ signa_cab_e(s)_c_nnect the HDM__c_MP_NENT_ s-V_DE__ _r V_DE_ _UT termina_s_n the
rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as
described on pages 20 to 25.
3. Turn on the Duo HD player, TV and Amplifier.
4. Pressthe input select button of the Amplifier to select the external input in orderto hear sound from
the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

Manufacturedunderlicensefrom DolbyLaboratories.
"Dolby"andthe double-Dsymbolaretrademarksof
DolbyLaboratories.
ManufacturedunderlicenseunderU.S.Patent#: 5,451,942& otherU.S.andworldwidepatentsissued&
pending.DTSandDTSDigitalOutareregisteredtrademarksandthe DTSIogosandSymbolaretrademarksd
DTS,Inc.© 1996-2007DTS,Inc.All RightsReserved.

26 conr_ections

CONNECTING

TO AN AUDIO SYSTEM

(7.1 CHANNEL

AMPLIFIER)

1. Using the audio cables, connect the 7.1 ANALOG AUDIO OUT (Front R, Front L, CENTER, SUBWOOFER,
Surround L, Surround R, SURR.BACK L, SURR.BACK R) terminals on the rear of the Duo HD player to the
7.1 Channel ANALOG AUDIO IN (Front R, Front L, CENTER, SUBWOOFER, Surround L, Surround R,
SURR.BACK L, SURR.BACK R) terminals of your Amplifier.
2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the
rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminal of your TV as
described on pages 20 to 25.
3. Turn on the Duo HD player, TV and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from
the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

7.1ChannelAmplifier

Pleaseturnthe volumedownwhenyouturnon the Amplifier.Suddenloudsoundmaycausedamageto the
speakersandyourears.
'_ Pleasesetthe audiointhe menuscreenaccordingto the Amplifier.(Seepages37-38)
,_ Thepositiondterminalsmayvarydepending
ontheAmplifier.Pbaserefertotheuser'smanualofyourAmplifier.
'_ Thefront leftandrightoutputsonyourplayerand7.1 channelamplifiermustbeconnectedto heardiscmenu
audiofrom certainBlu-Ray/HD
DVDdiscs.
_ Whenconnectingto a 5.1 channelhometheateror receiver,connectall theAnalogAudiooutputjacksfrom
the playerexceptfor theSurroundBackLeft/SurroundBackRightoutputs.

IEnglish 27

CONNECTING
(DOLBY

TO AN AUDIO SYSTEM

DIGITAL,

DTS AMPLIFIER)

1. If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the
Duo HD player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier.
If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL)terminal on the rear of the
Duo HD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2. Using the video signal cable(s), connect the HDMI, COMPONENT, S-VIDEO, or VIDEO OUT terminals on the
rear of the Duo HD player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminals of your TV as
described on pages 20 to 25.
3. Turn on the Duo HD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select the external input in order to hear sound from
the Duo HD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

iiii!

_ Pleaseturn the volumedownwhenyouturn on theAmplifier.Suddenloudsoundmaycausedamageto the
speakersandyourears.
'_ Pleaseset the audiointhe menuscreenaccordingto theAmplifier.(Seepages37-38)
,_ Thepositionofterminalsmayvarydepending
ontheAmplifier.Pleaserefertothe user'smanualofyourAmplifier.
_ Whenusingthisconnection,discswithLPCMaudiosoundtrackswill onlybeheardoverthe fronttwo
channels.

28 connect ons

CONNECTING
(HDMI

TO AN AUDIO SYSTEM

SUPPORTED

AMPLIFIER)

1. Using the HDMI-HDMI cable (not included), connect the HDMI OUT terminal on the rear of the Duo HD player to
the HDMI IN terminal of your Amplifier.
2. Using the HDMI-HDMI cable, connect the HDMI OUT terminal of the Amplifier to the HDMI IN terminal of your
TV.
3. Turn on the Duo HD player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select external input in order to hear sound from
the Duo HD player. Refer to your Amplifier's user manualto set the Amplifier's audio input.

'_ Pleaseturnthe volumedownwhenyouturnon the Amplifier.Suddenloudsoundmaycausedamageto the
speakersandyourears.
_ Pleasesetthe audiointhe menuscreenaccordingto the Amplifier.(Seepages37-38)
_ Thepositionofterminalsmayvan/depending
ontheAmplifier.Pleasereferto theuser'smanualofyourAmplifier.

IEnglish 29

CONNECTING

TO THE INTERNET

By connecting your Duo HD Pbyer to the Internet, you may be abb to access and enjoy
additiona] content with your HD DVD disc,
Some HD DVD Sites provide downbadabb contrd programs for improved interactMty,
You can abo update the pbyer's firmware via the Internet when avaibbb,
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal on the rear of the Duo HD player to the LAN
terminal of your modem.

To LAN oort
Broadband modem

Connecting using a router
(e.g. DSL)

(with integratedrouter) |
Broadband
service

Broadband modem

Router

To LAN port
To LAN

_ Internetaccessmaynot be allowed,dependingonthe routeryouuseor the ISP'spolicy.
Formoreinformation,contactyourISP(InternetServiceProvider).
ForDSLusers,pleaseusethe routerto makenetworkconnection.
IntemetconnectivitywithHDDVDdependson the disc'scontent.

connect

ons

Broadband
service

basc funcI ons of your
This section introduces basic playback functions and playback by disc type.
BEFORE

PLAYING

• Turn on your TV and set it to the correct Video Input (the input the Duo HD player is connected to).
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the POWER button, this screen comes up:
Ifyou want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for
the first time.) If the language for the startup screen is not set,
the settings may change whenever you turn the power on or
off. Therefore, make sure that you select the language you
want to use. Once you select a menu language, you can
change it by pressing the 1_ button on the front panel of the
unit for more than 5 seconds with no disc in the unit. Then the
MENU LANGUAGE SELECTIONwindow appears again
where you can reset your preferred language.

Discswhichcannotbeplayedon thisplayer.
* BD-R
* BD-RE
*
* DVD+R
* DVD-ROM
*
. CD-ROM
• CVD
•
• SuperAudioCD(exceptCDlayer)
•

HDDVD-R
* DVD+RW
DVD-RAM
* CDV
CD-I
• CD-RW
CDGsplayaudioonly,not graphics.

Abilityto playbackmaydependon recordingconditions.
. DVD-R
• DVD-RW(Vmode)
• CD-R
* Theunitmaynot playcertainCD-RandDVD-Rdueto the disctypeor recordingconditions.
Blu-ray/HDDVDis a newandevolvingformat.Accordingly,disccompatibilityissueswith newandexisting
formatdiscsarepossible.Notall discsare compatibleandnot everydiscwill playback.
Foradditionalinformation,referto the DiscTypeandCharacteristics
andCompliance
andCompatibilityNotice
sectionsof thisManual.If youencountercompatibilityproblems,pleasecontactSAMSUNG
customercare
center.
Theunit cannotplayCD-RandDVD-RW/-R
recordedcontentsuchasdivx,avi,mpg,mov,wma, mp3,digital
photoview(JPEG)
file.

English 31

bas c funot ons of
ON-SCREEN

MENU NAVIGATION

{ v,doo1
( .°o,c }

PLAYING

A DISC

1. Press the OPEN/CLOSE (@) button.
The STANDBY indicator light goes out and the tray opens.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the PLAY/PAUSE ((.i))button or OPEN/CLOSE (®) button to close the disc tray.

'_ Whenyoustopdiscplay,the playerrememberswhereyoustopped,sowhenyou pressPLAY/PAUSE
((-))
buttonagain,it will pickup whereyouleft off.
_ Pressthe STOP(®) buttontwiceduringplaybackto disablethe Resumefunction.
_ Topausethe playback,pressthe PLAY/PAUSE
(_,)) buttonduringplayback.
Toresume,pressthe PLAY/PAUSE
(_,)) buttononceagain.
_ If the playeris left inthe stopmodemorethan10 minuteswithoutany userinterl:ace,a screensaverwill
appearon yourTV.Ifthe playeris left inthe screensavermodeformorethan30 minutes,the powerwill
automatically
turn off exceptduringplaybackof an CDDA(AutomaticPower-OffFunction).

base

functions

TO PLAY

A TWIN-FORMAT

HD DVD DISC

To play a twin-format HD DVD disc, you should select HD DVD or DVD before inserting the disc.
This can be enabled only for a twin-format HD DVD disc.

1. With the unit in Stop mode, press the MENU button.
2. Press the Av buttons to select Setup, then press the ENTER or • button.
3. Press the • • buttons to select System Setup, then press the ENTER or • button.
4. Press the • • buttons to select Twin Format Disc, then press the ENTER or • button.
5. Select HD DVD or DVD on the menu then press ENTER.

Youcannotchangethe formatduringplayback.

USING THE SEARCH

AND SKIP FUNCTIONS

During play, you can search quickly through a chapter or track, and use the skip function to jump to the next
selection.

During playback, press the SEARCH (G G)

button.

• Ifyou want to search at a faster speed on the BD/HD DVD/DVD, press this button.
• Ifyou press the SEARCH (_) button,
X2_X4_X8_X16_X32_X128
• Ifyou press the SEARCH ((_,,_})
button,
X2_X4_X8_X16_X32_X128

_ Nosoundis heardduringsearchmode.

During playback, press the SKIP (G_)

button.

When playing a BD/HD DVD/DVD, if you press the SKIP (_) button, it moves to the next chapter. Ifyou
press the SKIP (_) button, it moves to the beginning of the chapter. One more press makes it move to
the beginning of the previous chapter.

IEnglish

bas c funot ons of
SLOW MOTION PLAY/STEP

Slow Motion

MOTION

PLAY

Play

In pause or step mode, press the SLOW button on the remote control for Slow Motion play.
• If you press the SLOW button, 1_1/8 I_ 1/4 I_ 1/2
• To return to normal speed playback, press the PLAY/PAUSE ((_) button.

This (®)icon

indicates an invalid button press.

No sound is heardduring slow mode.
_ Slow motion operatesonly in the forwarddirection.

Step Motion

Play

Pressthe STEP button on the remotecontrol during playfor Step Motion play.
• Each time the button is pressed a new frame will appear.
• When the STEP button is pressed, the next frame will be activated.
• Press the PLAY/PAUSE (_,}) button to resume normal play.

_ Nosoundis heardduringstepmode.
Stepmotionoperatesonlyintheforwarddirection.

34 base functions

For your convenience,
home environment.

you can set this player's features for the best use in your

SETTING THE CLOCK
Choose

your time zone

1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.
3. Press the • • buttons to select System Setup, then
press the ENTER or • button.
4. Press the • • buttons to select Time Zone, then press
the ENTER or • button.
5. Use the • • button to place the cursor to the appropriate
time zone for your area and press the ENTER button.

Youshouldset NTPServerto Onbeforeyoucanconfigurethe correcttimesettingforyourarea.
(seepage49)

Set the clock
To setup, follow steps 1 and 3 above.
4. Press the • • buttons to select Clock Set, then press the
ENTER or • button.
5. Press the _1• buttons to move to "da."(date),"hr"
(hour),"min" (minute), and "am/pm" Set the date and time
by pressing the • • buttons, then press the ENTER
button.

IEn{_Hish
35

SETTING

UP THE LANGUAGE

OPTIONS

Ifyou set the audio, subtitle, disc menu and player menu, in advance, they will come up automatically every time
you watch a movie.
1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.

3. Press the • • buttons to select Language Setup, then
press the ENTER or • button. Language setup menu will
be displayed.

4. Press the • • buttons to select the desired language
option, press the ENTER or • button.
• Audio : For the disc audio language.
• Subtitle : For the disc subtitles.
• Disc Menu: For the disc menu contained on the disc
• Menu: For the on-screen menu of your Duo HD player.
5. Press the • • buttons to select the desired language,
then press the ENTER button.

Pressthe RETURNor _1buttonto returnto the previousmenu.Pressthe MENUbuttonto exitthe menu.
Theselectedlanguagewill onlyappearif it issupportedonthe disc.

aud o setuo
I

SETTING

UP THE AUDIO OPTIONS

Allows you to set up the Audio device and sound status depending on the audio system being used with the player.
1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.

3. Press the • • buttons to select Audio Setup, then press
the ENTER or • button.

4. Press the • • buttons to select the desired audio option
from the options described below, then press the ENTER
or • button.
5. Press the • • buttons to select the desired item, then
press the ENTER button.

_ Pressthe RETURN
or _1 buttonto returnto the previousmenu,Pressthe MENUbuttonto exitthe menu.

Digital

Output

BD and HD DVD discs may include three audio streams.
- Primary Audio : Main audio sound track of the disc
- SecondaryAudio: Providesaudioforthe PIPwindowof an HD DVD
- Effect Audio : You will hear a sound every time an item is
selected in a BD/HD DVD menu.
• PCM : Select this when your equipment (Home theater or
Receiver)does not decode Dolby Digital. Primary,
Secondary and Effect audio is possible.
• Bitstrearn(Re-encode) : Re-encodes the Primary,
Secondary and Effect audio streams for DTS.
• Bitstream(Audiophile) : Provides a higher level of audio quality when watching a disc. Only Primary
audio (main movie soundtrack) will be heard.

_* Ifyou haveselecteda LPCMsoundtrackona disc,theoutputwill automaticallybe setto PCM.
_* Besureto selectthe correctDigitalOutputor youwill hearno soundor a loudnoise.
Whenplayinga DolbyDigitalmoviemakesurethe DigitalOutputis setto Bitstream.
Ifthe HDMIdevice(Receiver,
TV)is notcompatiblewithcompressedformats(Dolbydigital,DTS),the audio
signaloutputsasPCM.
_ SecondaryandEffectaudiowill not be heardwithregularDVDs.
_ SomeBDandHDDVDdiscsdo not haveSecondaryandEffectaudio.

IEngHish37

aud o setuo
I

PCM Down Sampling
• On : Select this when the Amplifier connected to the player
is not 96KHz compatible. 96KHz signals will be down
converted to 48KHz
• Off : Select this when the Amplifier connected to the player
is 96KHz compatible. Signals will be output without any
changes.

EvenwhenPCMDownSamplingissetto Off,somediscswill onlyoutputdownsampled
audiothroughthe
coaxialandopticaldigitaloutputs.

HDMI
• If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS),you should
set Digital Audio to PCM.
• If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down
Sampling to On.

Dynamic

Compression

This is only active when a Dolby Digital signal is detected.
• Off : You can enjoy the movie with the standard Dynamic
Range.
• On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.

SETTING

UP THE SPEAKER

OPTIONS

If you have connected this player to an Amp/Receiver or Home theater viathe 7.1 channel Analog outputs you need
to set the Speaker Options for the best sound.
1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button

Press the • • buttons to select Audio Setup then press
the ENTER or • button

4. Press the • • buttons to select Speaker Setup, then
press the ENTER or • button.
5. Press the • • _1• buttons to select the desired Speaker,
then )ress the ENTER button.
6. When done, use the • • _1• buttons to select Save, then
press the ENTER button.
If you don't want to save your work, use the • • _1•
buttons to select Cancel, then press the ENTER button.

Pressthe RETURN
or _1 buttonto returnto the previousmenu,

Speaker Setup
ro

Large,
Small
LargeSmall None

Large,
Small,
None
On,Off

ron_
Large,Small,
None

Speaker
• Large : Delivers full bandwidth sound with bass below 1O0
Hz.
• Small : If LFE is on, bass below 1O0 Hz will be outputted
through a Subwoofer instead of the speakers. If LFE is off
and the Front Speaker is set to Large, sound will be
outputted through the Front Speaker.

Subwoofer Speaker
• On : Select to use the subwoofer speaker.
• Off : Select to disable the subwoofer
speaker.
(This option can only be selected when the
Front (L+R)speakers are set to Large.)
Press the RED(A) button
• A test tone will be sent to L -- C -- R -- RS
-- RSB -- LSB -- LS -- LFE in order so you
can make sure the speakers are set up
correctly
• To end the test tone press the RED (A)
button again
• The test tone can only be activated when no
discs are in the unit
• The test tone outputs through the 71 channel
analog outputs only

• None : Select to disable the speakers.

IEngHish39

d seav setuo
I

SETTING

UP THE VIDEO DISPLAY/OUTPUT

OPTIONS

This function allows you to setup the TV screen settings. This function
depends on the disc or TVtype. It may not work with some discs or TVs.
1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.
3. Press the • • buttons to select Display Setup. then
press the ENTER or • button.
Video setup menu will be displayed.
4. Press the • • buttons to select the desired display option
from the options on the following pages.

5. Press the • • buttons to select the desired sub-menu
item from a video display option, then press the ENTER
button.

_* Pressthe RETURNor _1buttonto returnto the previousmenu.Pressthe MENUbuttonto exitthe menu.

TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
• 4:3 LetterBox:
Selectwhenyouwantto seethetotal
16:9ratioscreenBD/HDDVD/DVD
supplies,eventhoughyouhaveaTVwith
a 4:3 ratioscreen.Blackbarswillappear
atthe topandbottomofthescreen.
• 4:3 Pan-Scan:
Selectthisforconventional
sizeW when
youwantto seethe centralportionofthe
16:9screen.(Extreme
leftandrightside
of moviepicturewill becutoff.)
• 16:9Wide:
Youcanviewthefull16:9pictureonyourwidescreen
TV,

_ Dependingon the disctype,someaspectratiosmay notbe available.

Movie

Frame (24 Fs)

Movies are usually filmed at 24 frames per second. Some Bluray/HD DVD discs have the capability of playing back at this
frame rate. Setting the Movie Frame (24Fs) feature to ON
allows you to adjust the Duo HD player's HDMI output to 24
frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature solely on a TV
supporting this frame rate.
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video
material (30 frame). When the setting switches between Movie( 24 frame) and Video (30 frame), the
screen may blink for a few seconds.

Resolution
Setstheoutputresolutionof theComponentandHDMIvideosignal.
• The number in480i, 480p, 720p, 1080p and 1080i indicates
the number of linesof video. The i and p indicate interlace
and progressive scan, respectively.
- 1080p : Outputs 1080 lines of progressive video.
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines progressive video.
- 480i : Outputs 480 lines of interlaced video.

Ifthe connected TV does not support Movie Frame or the
selected resolution, you will see the following message:
Ifyou select Yes and the resolution is not supported, the TV's
screen will be blank.

_ Ifthe screenis blank,pressandholdthe _1 buttonon the frontof the playerfor morethan5 seconds
(nodiscinserted).All settingsarerestoredtothe factorydefault.Followthe stepson the previouspageto
accesseachmodeandselectthe DisplaySetupthatyourTVwill support,
Whenthe factorydefaultsettingsare restored,all the userdatastoredinthe persistentstoragewill be deleted.
_ Whenthe HDMIvideooutputis MovieFrame(24fs),simultaneousout is disabled.

IEngHish 41

disksav set ]o
I

o**o
Resolution according to the output mode (Simultaneous

Output with HDMI)

• BD/HD DVD playback

10801

480i

1080i

480i

72%

720p

480i

48%

480p

480i

48%

480i

1080p, MovieFrame(24Fs)off

1080p@60F

108@/1080i,
Movie
Frame
(24Fs)
on

1080p@24F

1080i,MovieFrame(24Fs)Off
720p

480i

• DVD playback

108%

1080p@60F

480i

1080i

480i

720p

480i

480p

480i

48%

480i

_ In DVDplayback,if bothHDMIandComponent
jacksareconnectedandyouselectthe Componentmode,the
DisplaySetupmenuwill showthe outputresolutionas10SOp.Theresolutionis actually480i.
'_ Thisplayerhasthe HDMIAutoDetectFeature.Whenthe playeris firstconnectedtoa TVviaHDMI,the
player'soutputwill be setautomatically
to HDMI.
_ If the HDMIAutoDetectionfeaturedoesnotwork,youcan't selectthe 1080presolutionor MovieFrame
(24Fs).
_ TheBD/HDDVDdiscmusthavethe 24 framefeaturein orderto usethe MovieFrame(24Fs)mode.
_ If youconnectonlyComponent
cableto yourTV,the Componentresolutionmaydifferfromthe chartabove.

Screen

Message

• On : Displays messages related to operation mode.
• Off : Does not display messages related to operation mode.

Front Display
• Automatic : Display is dark during playback and bright when the unit is in Stop mode.
• Dim : Select to dim the display window.
• Bright : Select to brighten the display window.

SETTING

UP THE HDMI SETUP OPTIONS

1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.
3.

Press the • • buttons to select HDMI Setup, then press
the ENTER or • button.
HDMI setup menu will be displayed.

Press the • • buttons to select the desired display option
(Anynet or Format), then press the ENTER or • button.

Anynet+

(HDMI-CEC)

When HDMI is set to on, you can operate the Anynet+ function.
• On : Anynet+ functions will work.
• Off :Anynet+ function will not work.

What is Anynet+?
Anynet+ is a convenient function that offers linked operations with other Samsung products with the
Anynet+ feature.
You can operate this unit using a Samsung TV remote control or power on your Samsung TV and Home
theater and start disc playback simply by pressing the PLAY button on the TV's remote.

Thisfunctionisnot availableif the HDMIcabledoesnot supportCEC.

To use Anynet+
1. Connect the Duo HD player to a Samsung TV with an HDMI cable. (See pages 20-21)
2. Set the Anynet+ (HDMI CEC) to "On" on your Duo HD player.
3. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)

Anynet+ Functions
• One touch play
You can power on your Samsung TV and Home Theater, and play the disc in this unit simply by
pressing the PLAY button on the TV's remote.
• One touch watching
Select "Watching Duo HD player" or "Connected to Duo HD player" (depending on your TV's menu)in
the Anynet+ menu on the TV. The Duo HD player will automatically turn on and the TV will be switched
to HDMI mode.
• Remote control Link
You can operate this player with your Samsung TV remote control.
• Available buttons on the Samsung TV remote: These buttons work the same as this player's remote
control.

IEngHish 43

- Playback control buttons : (_) (::-._
_
- Menu operation button: _
- Numeric buttons :(o)- (t}
- Color buttons : _ _

@ (_

TV Anynet+ Menu
When pressing the Anynet+ button on your Samsung TV's
remote control, the following On-Screen Display (OSD)will be
shown.
• Duo HD player Menu
- When playing a movie : brings up the disc's menu (same
as DISC MENU button on the Duo HD player's remote
control)
- In Stop mode : brings up the SETUP menu (same as the
MENU button on the Duo HD player's remote control.)
• Duo HD player Operation Menu
- When playing a HD DVD, DVD VIDEO, DVD-RW/-R, BD-ROM :
shows INFO OSD (same as INFO button on the player's remote control)

_ Thesemenuswill varyfrom SamsungTVto TV,

HDMI Format
You can optimize the HDMI output for connection to a TV or
Monitor.
• TV : Select if connected to a TV via HDMI.
• Monitor : Select if connected to a Monitor via HDMI.
If the player is connected to a TV, the Monitor option is
unavailable.

Sharpness
To adjust the picture smoothness.
(Low, Middle, High)

DVD Noise Reduction
This setting can be used to reduce image noise on DVD discs
on the screen.(Low, Middle, High)
This feature does not work with BD or HD DVD discs.

HDMH setup

SETTING

UP THE PARENTAL

LOCK

The Parental Lock function works in conjunction with BD/HD DVD/DVDs that have been assigned a rating which
helps you control the types of BD/HD DVD/DVDs that your family watches. There are up to 8 rating levelson a disc.

1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.

3. Press the • • buttons to select Parental Setup, then
press the ENTER or • button.
When you operate your Duo HD player for the first time,
the "Enter New password" message will be displayed.

4. Enter the 4-digit password using the number buttons on
the remote control.
The "Confirm the password" message will be displayed.
Enter your password again.

5. Press the ENTER or • button to select Parental Lock.

6. Press the • • buttons to select On or Off, then press the
ENTER button.

_ Pressthe RETURN
or _1 buttonto returnto the previousmenu,Pressthe MENUbuttonto exitthe menu,

If you forgot

your password

1. Remove the disc,
2. Press and hold the _ button on the front panel for 5 seconds or more,
• All settings will revert to the factory settings,

Whenthe factorydefaultsettingsare restored,all the userdatastoredinthe persistentstoragewill be deleted.

IEngHish45

Setting

the Rating

Level

1. Press the • • buttons to select Rating Level, then press
the ENTER or • button.

2. Press the • • buttons to select the rating levelyou want,
then press the ENTER button. For example, if you select
up to Level 6, discs that contain Level 7, 8 will not play. A
larger number indicates that the program is intended for
adult use only.
Level 1 is the most restrictive and Level 8 is the least.

Changing

the Password

1. Press the • • buttons to select New Password, then
press the ENTER or • button.

2. Enter the 4-digit password using the number buttons on
the remote control. The "Enter New password." message
will be displayed.

3. Enter your password again using the number buttons on
the remote control.

You can enjoy contents provided by the movie studio or update your player via the Internet,
Follow the steps bdow to ensure the best connection to the Internet for your player,
To obtain information on the proper settings, check the network settings on your computer or
contact your Internet provider,

TCP/IP

SE'n'ING
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.
3. Press the • • buttons to select Network Setup, then
press the ENTER or • button.
4. Press the • • buttons to select TCP/IP, then press the
ENTER or • button.
5. Press the • • buttons to select DNCP, then press the
ENTER button.

_ If DHCPisset to On,youcan'tselectIPAddress,Subnet
Maskor Gateway.
If DNSis setto Automatic,youcan't selectPrimary/
SecondaryDNS.

6. Press the • • buttons to select a desired item, then press the ENTER button.
• If DHCP is set to Off and, DNS to
Manual, enter the following for the IP
Address, Subnet Mask, Gateway and
Primary DNS settings (Secondary
DNS is optional).

• If DHCP is set to On and, DNS to
Manual, enter the following for the
Primary DNS setting (Secondary DNS
is optional).

Setup available

Setup not available
Setup available

• If DHCP is set to On and, DNS to
Automatic, you don't need further or
additional settings.
not available

IEngHish47

_* Whenyouselectan item,usethe numberand • • _1• buttons,

7. When done, use the • • buttons to select Save, then press the ENTER button.
8. Ifyou don't want to save your work, use the • • _1• buttons to select Cancel, then press the
ENTER button.

_ TheIPaddressusedinthis manualisforillustrativepurposesonly,Youmustreferto the yournetworksettings
forthe actuallPaddress.
ToobtainsettingsforlP address,Subnetmask,GatewayandPrimaryDNS,checkthe networksettingsinyour
computer,

PROXY SE'n'ING
If you are required to configure the proxy setting, enter the
settings specified by the ISP.
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
4. Press the • • buttons to select Proxy, then press the
ENTER or • button.
• Server
• Port
• User
• Password

_* Formoreinformation,contactyourISP(InternetServiceProvider).

SETTING
A cookie is a small text file that is stored while you are
navigating through web sites.
The cookie can contain information such as user ID,user
settings, etc.
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
4. Press the • • buttons to select Cookie, then press the
ENTER or • button.
• On : Cookies are used between the player and a Web
page server.
• Off : Cookies are not used. Convenience may be lost for some pages.

NETWORK

THROUGHPUT

Select the Internet modem type that is connected to your player.
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
4. Press the • • buttons to select Network Throughput,
then press the ENTER or • button.
• Network Throughput Available
Modem (28.8k,33.6k,56Kbps)
ISDN (64Kbps)
Dual ISDN (128Kbps)
DSL/CABLE (256kbps)
DSL/CABLE (384kbps)
DSL/CABLE (768kbps)
T1 (1.5Mbps)
LAN (10Mbps or More)

NTP SERVER

SE'I-FING

To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
4. Press the • • buttons to select NTP Server, then press
the ENTER or • button.
• On :the player automatically connects to the Internet
server in order to adjust the time setting.
• Off : the player does not connect to the Internet server
for adjusting the time setting.

MAC ADDRESS
Displaysthe MAC address of the player. It cannot be changed.
To setup, follow steps 1 to 3 in "TCP/IP Setting" on page 47.
4. Press the • • buttons to select Mac Address, then press
the ENTER or • button.
The MAC address appears.

Samsung
shallnotberesponsible
foranymalfunction
orfailedoperation
duetoInternet
connection
faihreor a
communication
error,NeitherSamsung
shallberesponsible
forfailureoftheuser'sInternet
connection,
_* Ifyouwantto usewirelessInternet,
youneedawirelessLANadapter,
Insimilarity,
youneedawirelessLANadapter
for
yourDuoHDplayer,
_* HDDVDfeatures
usingyournetwork
arenotmanufactured
norprovided
bySamsung,
Therefore,
Samsung
shallnotbe
responsible
forproperoperation
orfutureupdateforthosefeatures,
Ifyouhaveproblem
withthosemattersoranyother
question,
contactthediscmanufacturer,
_* Forsomediscs,a fasterinternet
connection
mayberequired,
Evenif youhavesuccessfully
installed
theplayer,
theinternet
connection
maynotworkproperlyaccording
tothenetwork
speedorserviceprovided,
TheInternet
features
ofDuoHDplayeriscompatible
withIEEE
(Institute
ofElectrical
andElectronic
Engineers)
802,3,
YoumaynotaccesssomeInternet
servicedepending
onthelimitations
ofyourInternet
service
provider,
_* AnyfeecausedbyyourInternet
connection
issolelyyourresponsiblily,
ForproperuseofDuoHDplayer's
internetfeatures,
youneeda10base-Tor100base-TxLANport,Youmaynotusethe
player'sinternetfeatures
onsomeInternet
servicethatyourISPdoesnotsupport
or provide,
A DSLmodemisneeded
to useDSLservice,
YoumayhaveagreedwithyourISP(Internet
Service
Provider)
onthenumber
ofconcurrent
internet
connection
devices,
Undertheagreement,
yourPCandDuoHDplayermaynotusethenetwork
simultaneously,
Youmaynotbeallowed
to usearouterunderyourISP'spolicy,
_* WhenusingDSLconnection
systems,
thenetwork
serviceprovided
bytheDuoHD
Playermaynotbeavailable.
(ex.PPPoE)

IEngHish49

eersistent storaae manaaement
I

SYSTEM

DEVICE MANAGEMENT

You can manage such information as stored provider and content directory.
To setup, follow steps 1 to 2 in "TCP/IP Setting" on page 47.
3. Press the • • buttons to select System Setup, then
press the ENTER or • button.
4. Press the • • buttons to select Persistent Storage
Management, then press the ENTER or • button.
5. Press the • • buttons to move sub-directory, then press
the ENTER or • button.

- To delete a directory Use the • • button to select a file to delete and press the
BLUE(D) button. (You cannot delete devices.)

Description of Device Information
• Category : Indicates if this device is a built-in or a
hot-plug device.
- Required : Built-in device
• Slot Status : Indicates the current slot type of the
device.

Highlight

Device Information

- Non Slot : Device that does not support hot-plug.
• Device Name : Name of the device
• Total Size :Total size of the device
• Available Size :Available sizeof the device
• Average Read Rate : Data read rate from the device
(based on the device spec)

ProviderList
Area

ScrollBar

Inmostcases,the ProviderdirectorycontainsrelatedfilestoeachmoviemakerandtheContentsdirectorystores
relatedfilesto eachtitle,
(Thesedirectories
containbookmark
information
filescreatedinplayback
ofa movieor downloaded
filesthrough
the
nelwork)
_ Allof thefilesinthedirectoriesarenotvisibleto users,
Ifyoudeletethe directory,allthefilesinthatdirectorywill bedeletedaccordingly,
_* Pressthe RED(A)buttoninthe Provider
directoryto moveupto theparentdirectory,'Device',
Pressthe GREEN
(13)buttonintheContents
directoryto moveupto theparentdirectory,'Provider',
Tothe rightofthedirectory/content
list,normallythereappearsinformation
onthe currentdevice(name,space
used,datatransferrate),
*_ Themoviemakercandisplayanimageinsteadof thedirectorynameintentionally
or forits ownreason,
50

persistent

stora{_e mana_3ement

Samsung
mayoffer
upgrades
toyourDuoHDplayer's
firmware
inthefuture.
Toupgrade
thisfirmware
youmust:
1. Gotosamsung.com
andrefer
to'SUPPORT'
page
todownload
thefirmware
andburn
anupdate
CD.
or
2. Connect
thisplayer's
LAN
terminal
totheLANterminal
onyourmodem
(see
page30)andfollow
thesteps
below.
FIRMWARE

UPGRADE

1. With the unit in No Disc mode(no disc in the unit), press the
MENU button.
2. Press the • • buttons to select Setup, then press the ENTER
or • button.
iilil

3. Press the • • buttons to select System Setup, then press the
ENTER or • button.

iil

4. Press the • • buttons to select System Update, then press the
ENTER or • button.

5. You will see a window that allows you to check the cable or
network connection status.

•

If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.

•

If the upgrade is not possible : You will see the following
description in the message box.
• If the cable is not connected :
"Ethernet cable is not connected. Please, check the
Ethernet cable."
• If the network connection has failed :
"This system can not connected to internet for update.
Please, check the network setup"
• If no later version is released (the latest version has been already installed) :
"The latest version of the firmware is already installed. There is no need to update."
• If there is a disc in the player :
"Pleasemaintain "No Disc" state for network update."
This indicates that you must remove all discs from the unit to perform the update.

IEngHish51

6. To perform the system upgrade, press the _1• buttons to
select Start and then press the ENTER button.

2. The system update gets started.

8. Ifyou select Cancel during the download process, you are
prompted to confirm your selection in a message box.
Ifyou want to cancel the download, select Yes and press the
ENTER button.

9. Verification will proceed.
When done, the firmware
update process will
begin automatically.

10. When the installation is done, you will see an
"Update Completed" message.
The player will automatically turn off in 3 seconds.
All settings will revert to the factory settings, the next time you
start the system, you will see the menu language selection
window.

_* If youwantto cancelthe upgradeinthe processof downloadingthe upgradedata,pressthe ENTERbutton.
Youwill seea confirmationmessage,
SelectingYeswill endthe upgradeprocess,andselectingNowill proceedwiththe verificationstep,
_ Whenthe systemupgradeis done,checkthe firmwaredetailsinthe SystemUpgrademenu.
_ Donotturn off the playerduringtheSystemUpgradeOtherwise,the playermay notworkproperly.

52 system upgrade

SYSTEM

INFORMATION

When the firmware upgrade is done, check the firmware details by following the steps below.
1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button.
3. Press the • • buttons to select System Setup, then
press the ENTER or • button.

4. Press the • • buttons to select System Information,
then press the ENTER or • button.
You can see detailed information about the current
firmware.

5. Press the ENTER button to select OK.
System Setup menu will be displayed.

IEn{_Hish
53

USING THE DISPLAY

FUNCTION

1. Duringplayback, press the INFO button on the remote
control.
2. Pressthe • • buttonsto select the desireditem.
3. Pressthe _1• buttonsto makethe desiredsetup and then
pressthe ENTER button.
• You may use the number buttons of the remote control
to directly access a title, chapter or to start the playback
from a desired time.
4. To makethe screen disappear,pressthe INFO button again.

If youareplayingcontentsfromthe Infomenu,insomecases,playbackmay malfunctiondependingon the
title.
Title: Toaccessthe desiredtitlewhenthereis morethanoneinthe disc.Forexample,if thereis morethan
onemovieon a BD/HDDVD/DVD,
eachmoviewill beidentifiedas aTitle.
Chapter:MostBD/RDDVD/DVD
discsare recordedinchapterssothatyoucan quicklyfind aspecificpassage.
Audio: Refersto the film's soundtracklanguage.A BDdisccan containup to 32 audiolanguagesanda
HDDVD/DVD
up to 8.
PlayingTime:Allowsplaybackof thefilm froma desiredtime.Youmustenterthe startingtime
asa reference.Thetime searchfunctiondoesnot operateonsomediscs.
Subtitle: Refersto the subtitlelanguagesavailableinthe disc.Youwill beableto choosethe subtitle
languagesor,if youprefer,turnthem offfrom the screen.A BD disccancontainupto 255subtitlelanguages,
anda HDDVD/DVD
upto 32.
Angle:Whena BD/RDDVD/DVD
containsmultipleanglesof a particularscene,youcan usethe ANGLE
function.

Using the Color

Key(A, B, C, D) Button

Use these buttons on the screen while the HD DVD disc is being
played. The operation of each button can differ, depending on the
disc content.

Use these buttons if you want to use functions supported by the
disc content.

watching

a movie

USING

THE DISC

& POPUP/TITLE

Using the Disc Menu
1. During playback, press the DISC MENU button on the
remote control.
2. Press the • • _1• buttons to make the desired setup,
then press the • or ENTER button.
• The Disc menu setup items may vary from disc to disc.

........
iiiii_i'i
_!!iii!_iii'

_* Dependingonthe disc,the DiscMenumaynot beavailable.
_* Youcan usevariousmenuoptionsprovidedbyyourBD/HDDVDindifferentways,accordingtothe disctype.
(ex:directionkey)

Using the Title Menu
1. During playback, press the TITLE MENU button on the remote control.
2. Press the • • _1• buttons to make the desired setup, then press the ENTER button.
• The Title menu setup options may vary from disc to disc.

_* Dependingonthe disc,theTitle Menumaynot beavailable,
_* Title Menuwill onlybedisplayedif thereareat leasttwo titlesinthe disc.

Using the Popup Menu
1. During playback, press the POPUP MENU button on the
remote control.
2. Press the • • _1• buttons or ENTER button to select the
desired menu.
• The Popup menu setup options may vary from disc to
disc.

Dependingonthe disc,the PopupMenumay not beavailable.

IEn{_Hish
55

REPEAT PLAY
Repeat the current chapter or title.

1. During playback, press the REPEAT button on the remote
control. Repeat screen appears.

2. Press the • • buttons to select Chapter or Title.
• BD/HD DVD/DVD repeats play by chapter or title.
8. To return to normal play, press the REPEAT button again, then press the • • buttons to select Off.

Dependingon the disc,the Repeatfunctionmaynot beavailable.
TheRepeatfunctionmay not operateproperlyonsomeHDDVDs,dependingon the disctype.

Using the A-B Repeat function
1. Press the REPEAT A-B button on the remote control.
2. Press the REPEAT A-B button at the point where you want repeat play to start (A).
3. Press the REPEAT A-B button at the point where you want repeat play to stop (B).
4. To return to normal play, press the CANCEL button.

PointBcannotbe setuntil5 secondsof playbackhaselapsedfrom pointA.

RESUME

PLAY

You can use this function to resume playingthe disc from the last stopped point.
If you press the Stop button during playback and press the RESUME PLAY button, the player will
resume playing from the last stopped point.
If you press the Stop button during playback and press it again, the Resume Play function will be
cancelled.

_ Youcanchangethe settingsinthe Setupmenuwhilethe playeris storingthe locationinformationon the
memory.However,yourchangewill not beapplieduntilthe ResumePlayfunctioniscancelled,
Thisfunctionmaynot beenabled,dependingonthe disccontentor the scene.

watching

a movie

SELECTING

THE AUDIO

LANGUAGE

You can select a desired audio language quickly and easily with the AUDIO button.

Using the AUDIO

button

1. Press the AUDIO button during playback. The Audio
changes when the button is pressed repeatedly.
• The audio languages are represented by abbreviations.

2. To remove the AUDIO icon, press the CANCEL or RETURN button.

Using the INFO button
1. During playback, press the INFO button on the remote control.
2. Press the • • buttons to select Audio language.
3. Press the _1• buttons on the remote control to select the desired audio.

Thisfunctiondependsonwhat audiolanguagesareencodedonthe discandmaynot beavailable.
A BDdisccancontainupto 32 audiolanguagesanda HDDVD/DVD
up to 8.
Dependingonthe disctype,youcanusethe Audiobuttonto changethe audiosoundtrackas wellasthe
audiolanguage.
SomeBlu-ray/HDDVDdiscsmayallowyouto selecteitherthe multi-channelLPCMor Dolbydigitalaudio
soundtrackin English.

IEn_Hish57

SELECTING

THE SUBTITLE

LANGUAGE

You can select a desired subtitle quickly and easily with the SUBTITLE button.

Using the SUBTITLE

button

1. Press the SUBTITLE button. The subtitle changes when
the button is pressed repeatedly. The subtitle languages
are represented by abbreviations.

2. To remove the SUBTITLE icon, press the CANCEL or RETURN button.

Using the INFO button
1. During playback, press the INFO button on the remote control.
2. Press the • • buttons to select Subtitle.
3. Press the _1• buttons on the remote control to select the desired subtitle language.

_ Dependingon BD/HDDVD/DVDs,
youmayhaveto changethe desiredsubtitleinthe DiscMenu.Pressthe
DISCMENUbutton.
Thisfunctiondependson whatsubtitlesareencodedon the discandmaynot be availableon all BD/HDDVD/
DVDs.
A BDdisccancontainup to 255 subtitlelanguagesanda HDDVD/DVD
upto 32,

watching

a movie

CHANGING

THE CAMERA

ANGLE

When a BD/HD DVD/DVD contains multiple angles of a particular scene, you can use the ANGLE
function.

Using the ANGLE

function

1. During playback,press the INFO button on the remote control.
2. Pressthe • • buttons to select Angle.

3. Press the _1• buttons or you can use the number buttons on the remote control to select the
desired angle.

Ifthedischas0nlyoneangle,thisfeaturew0n'twork.Currently,
veryfewdiscshavethisfeature.
_ Depending
onthe disc,thesefunctionsmaynotwork.

USING THE CURSOR

FUNCTION

Certain HD DVD discs support a cursor function that allows you to move the cursor in 8 different directions.

1. Press the Cursor button if you are playing a disc that supports the cursor function.
2. Move the cursor using the 8 direction buttons.
3. The operation of the cursor key can be taken advantage of for various functions, depending on the
disc.

For more information on the cursor function, refer to the disc's user manual.

IEn{_lish59

istonna to musio
k_J

PLAYING

AN AUDIO

CD(CD-DA)

1. Insert an Audio CD(CD-DA) into the disc tray.
For an audio CD, the first track willbe played
automatically.
2. To move to the Music List, press the STOP or RETURN
button.
The Music List screen is displayed

3. Press the • • buttons to select the track you want to play,
and then press the ENTER button.

AUDIO

CD(CD-DA)

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 68
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Tue Feb 26 08:04:48 2008
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Samsung BD UP5000 User Manual DVD PLAYER Manuals And Guides L0801367

SAMSUNG DVD Systems Manual L0801367 SAMSUNG DVD Systems Owner's Manual, SAMSUNG DVD Systems installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation