Samsung DVD V2000 User Manual DVD/VCR Manuals And Guides L0204164
SAMSUNG DVD/VCR Combo Manual L0204164 SAMSUNG DVD/VCR Combo Owner's Manual, SAMSUNG DVD/VCR Combo installation guides
User Manual: Samsung DVD-V2000 DVD-V2000 SAMSUNG DVD/VCR - Manuals and Guides View the owners manual for your SAMSUNG DVD/VCR #DVDV2000. Home:Electronics Parts:Samsung Parts:Samsung DVD/VCR Manual
Open the PDF directly: View PDF .
Page Count: 57
Download | ![]() |
Open PDF In Browser | View PDF |
DVD-V2000 Instruction Manual --i V_DEO _ Hi-Fi www.samsungasc.com WARNING: Copy Notification TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Federal law provides severe CiVil and ¢rlmtnal penalties for the unauthorpzed reproduction d_strlbutJon or exhlbltlOrl Of copyrighted motion pictures and videotapes (Title 17, United States Code Sections 501 and 506) WARNING: TO AVOID HAZARDOUS EXPOSURE TO INVISIBLE LASER RADIATION DO NOT OPEN OR REMOVE/DEFEAT LASER TRANSPORT PROTECTIVE HOUSING Macrovision Th_s product Notification incorporates copyright protection technology that _s pro(ected by method cla=ms of certain U S patents and other =ntellectua[ property modifications not expressly approved by the manufacturer who is responsible for ¢omphance w_th Part 15 ECC rules rights owned by Macrows_on Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrows_on Corporation and _s intended for home and other I_mded viewing uses only unless otherwise authorized by MacrovJslon Corpora{ion Reverse engineering or disassembly _$ prohloKed NOTE TO CATV SYSTEM INSTALLER: CAUTION: This remrnder is provided to cat_ the CATV system installer s attention to Article 820-40 of the To prevent fire, shock hazard or annoying intel_erence use only the recommended accessories To prevent electric shock, do not use [h_s (polarized) plug w_h an extension cord receptacle or other outlet unless the Olades can be USER/INSTALLER CAUTION: Your authorety to operate this FCC Certified equkpment Could be voided if you make changes of Na(Ional Elect_'onlc Code that provides guldeJines for proper groundtng and _n particular specifies that the cable ground shaFI be connected to the grounding syslem of [he building, as close Io the point of caole entry as pracltcal fullj inserted to prevent blade exposure TO reduce the rJsk of electric shock, do not remove the un=t cover or back There are no _ervlceabl8 parts Jnslde Refer servicing to quahfled personnel only CUIDADO: Pare prevenlr irlcendlO _nterferenc_a enfadosa rlesgo de choque o use soiamente los accesor,os recomendados Para prevel_lr electrochoque, no use este enchufe (pOlar,zero) con un cordon de extension tome de corrlen(e Th_s symbol _s intended to .alert the user to the presence of unmsulated dangerous voltage Within the product's enclosure that may be Of sufficient magnrtude to constltLIte risk of fire or electric shock Th_s symbol Js intended to alert the user to the presence of Importan_ operating and maintenance I:terature product iFisEuctlons accompanying in the this o cualqu_er otra tome a mends que los dlentes puedan ser completamente insel_ados para prevenlr exposlcldn de los dlentes Pare reducer el rlesgo de desGarga electnca no remueva la Cublerta o la porte posterior del eqblpo Dentro del eqL_lpO no hay partes que requleren servlclo D_rl_ase so[amen_e a personal ca[_flcado cuando reqLllera servlcio ATTENTION: Pour eviler [es ]ncendis inlerferences f_cheuses accessoires recommat'ldes risque de Chocs OU employei" seulemen[ les Pour evl{er les _hocs electrlques ne pas employer cette pr_se (polanseel ave[; L_ne r_llonge une prise de COL_rartt ou une aM[re sortie de cogrant a RIOII_S qLse les lathes peuvent 6tre inserees b fond pour I'exposlt_on lames Pour reduire les rlsques de chocs des electrlques ne pas retlrer le couvercle ou I arrlere du module II n'y a pas de p_ece Utlhsable a I interleL_r Ne loire effectuer I en{retlen que par un personnel quahfle Important Safety 1 Read these instructions 2 Keep these mstructlom 3 Heed all warnings 4 Follow 5 DO not 6 CJean only With 7 8 use this Do no( apparltus instil near near ventdat_on opemngs any heat sources Install such in accordance as radiators, with heat the manufacturer's registers, of other ths_JCtiOnS. apparatu_ (ir_cthding amplifiers) that heat. Do not defeat the third Protect the than prong electrtclan safety purpose the other are provtded power cord for your of the from and the point OnFy use attachments/accessories 12 Use only with stand, a used, caution 13 Unplug this apparatus injury from tip-over 14 Refer all servicing any way. apparatus, When to quaidled such as power-supply safety from they exit the from cord has been provtded walked plug. and plug A polarized a third plug has two grounding does not fit into your blades prong. The wide outlet, consult with blade or an by the specified at plugs, by the manufacturer, combination use cauttonlll_en personnel exposed particularly convenience manufacturer cartJapparatus or ptug on or pinched the apparatus. or table a cart is used, service blades outlet betng bracket, moving or grounding-type has two If the speclhed tripod, when the apparatus polarized type plug obsotete being where 11. cart, of the A grounding fo_ replacement the receptacles, When water dry cloth block any Do not one wider 10 ............................. all instructions produce 9 Instructions Servicing is damaged, to rain mowng is required hquld or moisture, to avoid from the cart/apparatus when has been does or sold with injury the apparatus spdled not operate the applwat_ tip-over. combination to avoid has been damaged or obJeCtS have fallen normally, or been into dropped the in 1 f Table of Contents Safety • • Welcome • • m • ........ Important Safety Instructions ........ Feature Summary ......... Unpacking . . Disc Type end Characteristics . . . 1 - System Overview ............. • Front Panel Overview . . • Rear Panel .. a • • Front Panel Dnsplay ........ Remote Control Overview . Insert Remote Control Battenea. • Usmg theTV Buttons . on the Remote ContTot 7 7 7 8 9 g 10 10 11 11 12 • 2 - Gettmg Started ... • Basic Connectlons/AuloSetu 13 13 • 3 - Basic 14 • Operation • Deck Control • • • Beaut DVD Playback Bas_cVHS Playback Basic TV Tuner Operatnons 4 - System Buttons . .. Setup • • • On-Screen Menu NavlgaL_on Menu Language ManuaICIock Set . • • • • • Tuner Band Settmg Auto Channel Memory Channel Add/Delete RF Output Channel Front Panel Dimmer • Auto Power Off 14 14 15 16 16 16 17 18 19 20 21 22 22 23 Table of Contents t 5- DVD • • • • • • • • • • Setup ............................................... 6 - DVD•Sound Setup ......................................... • A/V Receiver Connections ......................................... 32 32 7 - DVD 33 Operations .......................................... • • • • • • • • Special Playback Features ......................................... Disc Menu Navigation ............................................ Screen Fit Playback .............................................. Title/Chapter/Time Selection ....................................... Zoom ......................................................... Angle ......................................................... Subtitle ....................................................... Digest Playback ................................................. • A-B Repeat ..................................................... • • • • • • • Repeat Chapter/Title ............................................. Audio ........................................................ Bookmarks ..................................................... Programmed Playback ............................................ Random Playback ............................................. MP3 Playback ............................................... 3D Sound ...................................................... i!!ii!i! i!i i 24 24 24 25 26 27 28 29 30 31 31 Disc Menu Language ............................................. Audio Language ................................................. Subtitle Language ............................................... Parental ....................................................... Digital Output ................................................... DTS .......................................................... Dynamic Compression ............................................ TV Aspect Ratio ................................................ Black Level ..................................................... AIt Video Out ................................................... 33 34 34 35 36 36 37 37 38 , 39 39 40 41 42 42 43 i_¸¸_i:_! i ii_iii! 2 i[ _ Table of Contents 8 - VCR • • • • • 9 - VCR • ............................................ Recording ........................................... 44 44 44 45 45 46 47 • Basic Recording ................................................. 47 • • • Special Recording Features ........................................ One-Touch Recording (OTR) ....................................... Record Speed .................................................. 48 49 49 10 - Timer Recording ......................................... • How to Set a Timer Recording ...................................... 50 50 Appendix A - 51 • • • • • PZayback Special VGR Playback Features .................................... Tracking ....................................................... Auto Play/Rewind ................................................ S-VHS Playback ................................................ Vadable Search System ........................................... Advanced Connections ............................. S-Video/Component Video Connections (for DVD) .................... Stereo Connections .............................................. Monitor TV Connections .......................................... Connecting Other Video Equipment .................................. Appendix B - Help ............................................ • Technical Specifications ........................................ 51 52 53 54 55 55 I Feature Summary System Features • Complete versatilityto play DVD, VCDs, audio CDs, MP3 discsor VHS Tapes. • Watch a DVD while recordinga TV show to the VCR. • Aulo Setup automaticallysets clockand searches for channels• , Remote controlsboth DVD and VCR decks. • Composite, S-Video and Componenl video outputs for high connectivityand optimum performance. • RF inputs and outputs for connectionto all TVs-new or old. • English/French/Spanish on-screen programming DVD Features • 10-bgvideo digital to analog converter and 27MHz advanced digital filter, • Playback of 96KHz/24.bit sources. • DTS digital output for DTS-enhanced DVDs. • Playback MP3 files from CD-ROM. . Continued audio during 2x speed playback. VCR Features • Hi-Fi Stereo VCR. • 4 heads for superior slow motion and stop action. • Playback of S-VH$ tapes at betterthan standard resolution. • VISS Index Search/Scan, Zero Return, Blank Search. • 8-event/1 month timer recording. • Time remaining counter, real time counter• *Discs which cannot be played with this player . DVD-ROM • DVD-RAM • CD-ROM • CDV • CDI *Abilityto play back may depend on recording conditions. • DVD.R • CD-RW • DVD+RW,-RW • HD layer of super Audio CD • CDGs play audio only, not graphics. Unpacking As you unpack, please check that the following items are included in your D VD. VCR packing case: • DVD-VCR RegistrationCard (AD68-00078A) User's Guide (AC68-01816A) RCA cable for Audio/Videoconnection (AC99-tO500H) $$_6I _-e$ = RF (Radio Frequency) Antenna Cable (AC39-42001J) Remote Control (AC59-00058K) 1.5V "AA" Batteries - 2EA (AC43*12002J) : _;;s_;),}s i; ? i r i i Disc Type and Characteristics This DVD player ascapable of playing the following ] [ypes of discs with the correspondmg Single-sided DVD 5" Video V I D E • DVD con_ain$axcellentsound and videodueto DolbyDigital and MPEG-2 system. • VBdou$ screen and audio 240 rnin, Double-sided 480 rain Audio lunctions can be easily selected _rough the on- Single-sided 80 min. 3_/2" D Iogos: Double-sided 160 rain. VIDEO-CD 5" 74 rain. v . Video_h CD sound,VHS Audio q=Uty a, MPEC,.i compressiontechnology. Video 3_/z" 20 rain. 5" 74 min AUDIO-CD • CD is recorded as a Digital Signal wgh beUer Audio )_Grr,_ 31_" AU_ audio qua!!ty, less distortion and less deterioratlon of audio 20 rain quality over time. • Pray • NTSC broadcast s stem in U.S.A _/aSnada.Korea lapan, e{c. Regmn Number Both The DVD match player • Dolby and the d_scs are coded in order for Tile disc to Dlay The Region Number • Siereo ols¢ OIg$tal dl_ for this player - Digital . DTS disc Audio disc by region These f the codes do not match. is described regional codes Tne disc will on the rear panel must not play of the player. • MP3 disc Front Panel Overview 2 1 8 9 10 11 12 4 5 6 14 15 16 13 1 DVD DECK (p.14) 11 PLAY/PAUSE (p.14, 15, 33,44) 2 DVD OPEN/CLOSE (p.14) 12 FAST-FORWARD/FWD (p.33, 44) 3 VCR DECK (p.15) 13 FRONT PANEL DISPLAY (p.10) 4 CHANNEL &/y 14 LINE IN 2 COMPOSITE VIDEO JACK 5 RECORD (p.46) 15 UNE IN 2 LEFT AUDIO JACK 6 DVD-VCR SELECT (p.14) t6 LINE IN 2 RIGHTAUDIO JACK 7 VCR EJECT (p.15) 8 POWER (p.14) 9 STOP (p.33) 10 REWIND/REV(p.33, (p.16) 44) 7 Rear Panel VIOEo 1 _ AUDbD"_ / 2 3 4 5 6 7 8 1 RF ANTENNA INPUT 6 COMPONENT VIDEO OUT 2 RF OUT TO TV 7 DIGITAL AUDIO OUT(COAXIAL) 3 LINE OUT TO TV (COMPOSITE) 8 DIG|TAL AUDIO OUT(OPTICAL) 4 LiNE IN 1 9 S-VIDEO OUT 5 AUDIO LiNE OUT TO "iV -S-VIDEO OR COMPONENT) I I I Front Panel Display 8 1 2 9 10 3 1 The DVD Deck is active 2 A DVD. CD. VCD, or SVCD is loaded 3 The number to Ibe right of the "TITLE" symbolis the current ti,e number 5 6 7 8 4 5 11 6 12 9 A DVD with a DTS soundtrackis loaded 1o The number to the rightof the "CHAP"symbolis the current chapter number The time. counterposition, time remaining or current deck status is displayed 11 The Hi-Fi track of a VHS tape is playing (The current TV show or _ideo is broadcast in Stereo) VHS tape is inserted 12 A Timer Recording is programmed or in progress Recording is in progress (normal and timer) The VCR Deck is active 3D Sound is active If blinking there is an error. Also displays without the clock hands _oindicate that a recording is in progress, and blinks when lhe VCR is in Pause mode. Remote Control Overview 1 2 3 4 © @ 2_ -- 3-- ® 4_ 5 6 7 8 _18 19 20 21 6 22 23 7 24 5_ 2S 8-- -- 9 10_ 11_ 12_ 13 26 27 -- 28 9 10 11 12 13 14 15 16 17 18 t9 20 21 22 14 29 30 15 31 16-- 32 23 24 25 26 17 33 27 28 29 30 31 32 S/IMSUNG 33 Insert Remote Control Batteries • Remove the battery cover by pushing down on the thumbtab and sliding the cover. • Insert two 1.5V "AA° batteries as shown, paying attention to the correct polarities (+/-). • When finished, slide the cover until it clicks back into place POWER (p.14) SCREEN FIT (p. 34) SHUTTLE <<1>> (p.44) MODE (p.41,42) REPEAT (p.38, 39, 44) ZOOM (p.36), TV MUTE (p.12) 3D SOUND (p.43), 100+ (p.16) DVD(p.14) DIGEST (p.37) F.ADV/SKIP (p.33, 44) VOLUME +/- (p.12) REWIND (p.33.44) SKIP BACK (p.33. 44) STOP (p.33) RECORD (p.47) UP (p.16) LEFT (p.16) SETUP (p.16) ENTER (p.16) RETURN (p.16) TITLE (p.34) SP/SLP (p.49) OPENICLOSE (p.14, 15) TVNCR (p.16) 0-9 (p.16) AUDIO (p.39) ANGLE (p.36) INPUT SEL (p.47) CLEAR (p,40, 41,42) VCR, TV SELECT (p.14) DISPLAY (p.16, 35) CHANNEL A/T (p.12, 16) TRACKING ,&IT (p.44) FAST-FORWARD (p.33,44) SKIP NEXT (p.33, 44) DISC MENU (p.34) PLAY/PAUSE (p,14, 15) RIGHT (p.16) DOWN (p.16) MARK (p.40) SEARCH (p,46) SUBTITLE (p.37) TIMER (p.50) Using the TV Buttons on the Remote Control Your VCR remote control will work with Samsung televisions and compatible brands. To determinewhetheryour televisionis compatible,follow theinstructions below, 1 Switch your televisionon. 2 Pointthe remote controltowards the television. 3 Hold down the TV button and enter the two-figure cede corresponding to the brand of your television, by pressing the appropriatenumeric buttons. Brand Codes Brand Codes $AMSUNG 01, 14, 15, 23 LOEWE 28 SHARP 02, 16, 22 ZENITH "_7 SONY RCA 03 07, 29 LG MAGNAVOX 06, 08, 18 04 TOSHIBA 09 EMERSON 21 PANASONIC JVC 12, 24 11 SANYO DAEWOO 05, 20 19 HITACHI 10 NOBLEX 25 MITSUBISHI 13 TELEFUNKEN 26 NEWSAN 27 Result: If your television is compatiblewith the remote control it will switch Off. It is now programmed to operate with the remote control. If several codes are. indicated for your television brand, try each one in turn until you find one that works• (_"= When you change the batleries in the remote cor_trol, you must reprogram the code. following the same procedure YOUcan then control the television using the following buttons Button Function POWER (_ Used to switch the televisionon and off. INPUT _) Used to select an external source VOL + or CH (• (_) or T) MUTE _ (_ Used to adjust the volume of the lelevision. Used to select the required channel• Used to toggle the sound on and off "[he various functions will not necessarily work on all televisions It you encounter problems, operate the television directly I Basic Connections/Auto Setup in this section, you will connect the D VD-VCR to your television and run Auto Setup, which automatically searches for channels and sets the player's internal clock. NOTES: • Advanced Connections are covered in Appendix A. • Even if you plan to use the S.Video or Component Video Outputs, _y_ you MUST connect the DVD.VCR to your television with either the standard RF or the Line Out connection. This enables you to operate the DVD-VCR setup menus. 1 Connect Antenna/Cable FromAntennaor Cable to DVDoVCR Connect the RF antenna cable from your indoor/outdoorantenna or cable wall outlet to the IN (FROM ANT.) jack on the back panel of the DVD-VCR. Connect DVD-VCR to TV Choose one of the following methods to connect the DVD-VCR to your IV: RF Connection Connect the supplied RF antenna cable from the OUT (TO TV) jack on the back panel of the DVD-VCR to your television'sAntenna input. NOTE : Check the channelto connectDVD-VCR to your television'sAntenna Input; See page 22. Line Connection To TV's Antenna Input Connect an RCA-type audio/video cable (red. white, yellow) from the LINE OUT jacks on the back panel of the DVD-VCR to your _elevision's Line In jacks. Use red for right audio, white for left audio, and yellow for video. NOTE: It is recommended that you use the Line Connection if your TV is equipped with RCA jacks. 3 Plug In DVD-VCR Connect the DVD-VCR power cord to a standard 120V/60Hz wall ouUet. Don't press any buttons on the DVD-VCR or remote during auto setup. "AUTO" blinks while the DVD-VCR runs an auto setup procedure, where it will automatically search for all active channels and set the clock. When Auto setting has been completed, the front panel displays the current time. If Auto Clock set is unable to find a channel to set the clock, you can set the clock manually; See page 18 4 Turn On DVD-VCR PressthePOWERbuttonon the remotecontro_or on the DVD-VCR'sfront panel. 5 Turn On TV Pressthe POWERbuttonon your TV. 6 Set TV to Channel 3, 4 or Line Be sure _ouse the same channel you selected in Step 2 If you used the Line Connection, set your TV to its Line Input. r Deck Control ] Buttons The DVD-VCR uses one set of controls to operate both decks. The following buttons are helpful in successfully controlling each deck. 1 POWER Button Press the POWER button on the remote controlor front panel to turn on the DVD-VCR. 2 DVD Button Press the DVD buttonon Ihe remote controlor front panel when you want to controlthe DVD deck. • The DVD thdicator will lighton the Front Panel Oisplay to show that the DVD deck is selected. VCR Button Press the VCR button on the remote controlor front panel when you want to controlthe VCR deck. • The VCR indicatorwill light on the Front Panel Display to show that the VHS deck is selected. INPUT SEL. Button Press the INPUT SEL buttonrepeatedly to cycle throughall of your input sources, includingthe Tuner (Oh##), Line 1 (rear AV input),and Line 2 (front AV input). • It is only available when VCR deck is selected. Basic DVD Playback ] Follow these instructions to playback a DVD. 1 Open Disc Drawer Press the OPEN/CLOSE buttonon the remote controlor front panel to automatically power on the DVD-VCR and open the disc drawer, 2 Insert Disc P_acethe disc in the drawer with the label side of the disc facing up. If the disc has two sides, orient the disc with the desired label facing up. ._t 3 Close Disc Drawer Press the OPEN/CLOSE button on the remote controlor front panel to close the disc drawer. 4 Play the DVD Press the ),'-II (Play/Pause) button on the remotecontrolor front panel. • Many discs will begin playback automaticallywhen the disc drawer closes. • If the DVD has a disc menu, or more than one tit;e, the disc menu may appear. 5 Additional DVD Options • For sdvancod DVD Setup options, see pages 24~31 • For specia! DVD Playback features, see page 33~43. Basic VHS Playback To play a videotape, simply insert it in the VHS deck and press the Play button. Tapes without Record Safety Tabs can be set to play automatically when inserted; see page 45. 1 Insert VHS Tape Insert a standard VHS videotape into the VHS Deck. • Power will turn on automatically when you insed a videotape. 2 Play Tape Press the >..ll (Play/Pause) button on the remote controlor front panel. ]f the tape is missing the Record Safety Tab and Auto Play is turned on, the tape witl begin to play automatically, see page 45. 3 Stop Playback Press the • 4 (Stop) button on the remote controlor front panel• Eject Tape Press the OPENICLOSE button on the remote control or the EJECT button on the front panel. 5 Additional • • • VCR Options For special VCR Playback features, see pages 44~45. For VCR Recordingfeatures, see pages 47~49. For Timer Recordthg features, see pages 50. RecordSafety Tab Basic TV Tuner Operations The following buttons are used when watching television via the DVD.VCR's built-in TV tuner. 1 TVNCR Press to switch between your TV's tuner and the VCRIs internal tuner. 2 Channel Up/Down Press tochange to the nextor previous channel. 3 0-9 Buttons Press to select channels directly. 4 100+ Button Press to select channels 100 and higher.First, press the log+ button, then press the remaining digitsusing the 0-g buttons. 5 Display Press to display the channel you are watching. • Also works in DVD and VCR mode. On-Screen Menu ] Navigation The on.screen menu system allo'ws you to set all functions for your MAIN MENU gBi DVD.VCR, The following buttons are used to open and navigate through the on-screen menu system, I SETUP Button With the DVD in stop mode, press to accessthe DVD-VCR onscreen menu system. 2 UplDown and LefURight Moves menu selection cursor up, down, left and right to cycle throughmenu options 3 ENTER Button OVD $owp _RETURN _ < I* _ENT_ The Setup Menu is the opening screen of the on-screen menu system Press to confirmsettings in certain menus, 4 RETURN Button Returns to the last menu viewed or exits the menu system. l Menu Language Follow these steps to change the on-screen menu language to English, French or Spanish. 1 Open "SETUP MENU" With the DVD in stop mode, press the SETUP button. 2 Set "Language" Usingthe Up[DownandLeftJRight buttons,movetheselection arrowto "LanguagelldiomalLangue," thenp,'essENTERbutton. 3 Set menu Language Move the selectionbar to your desired Language, then press ENTER button, gjla Manual ] Clock Set If Auto Setup was unable VCR'$ internal clock, to find a local follow ITlanually. NOTE: It is important these TV station instructions to set the clock to set the DVD- to set the date/time for accurate Timer Recording, 1 Open "SETUP MENU" With the DVD in stop mode. pressthe SETUP button. 2 Select "Clock" Using the up/down and left/right buttons,move the selectioncursor to "Clock SeUAdjust,"then press ENTER to select, 3 Select "MANUAL" Move the selectionarrow to "MANUAL', than press ENTER to turn thisfeature "Off," • The "Set Clock Menu" will change as shown. 4 Set the Clock Press LEFT/RIGHT to select each of the followingoptions, then press UP/DOWN to set each option: • , • • • Sat Set Set Set Set Hour Minute Month Day Year - Set the hour usingthe up and down buttons. Set the minute using the up and down buttons. Set the month using the up and down buttons. Set the day using the up and down buttons. Set the year using the up and down buttons. AUtO • M_nual 5 Confirm Settings Press the RETURN buttonto save your clock settings and return to the Setup menu. • Press Return again to e._it. t8 I Tuner Band Setting This feature allows you to manually set the DVD. VCR's tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. • Use this setting only if Auto Setup detected the incorrect tuner band, i,e. channels are coming in on the wrong channel numbers. 1 Open "SETUP MENU" With the DVD in stop mode, press the SETUP button. 2 Select "Channel" Using the up/down and left/rightbuttons, move the selection cursor to =Channel Setup", then press ENTER to select. 3 Select "AnUCable" Move the selectionarrow to "Ant/Cable" then press hght to select from the following options: • Antenna - Indicates that the DVO-VCR is connected to an indoor or outdoor VHFIUHF antenna. • Cable TV - Indicates that the DVD-VCR is connected to Cable TV. Auto Channel Memory ] Auto Channel Search will automatically channels in ),our area. 1 Open "SETUP seek and store all active MENU" With the DVD in stop mode, press the SETUP button. 2 Select "Channel" Using the up/down and leWdghtbuttons, move the selectioncursor to "Channel Setup', then press ENTER to select. 3 Run "Auto channel memory" Move the selectionarrow to "Auto channel memory."then press ENTER to select. • The DVD.VCR will automatically search for all available channels in the selected Tuner Band.This procedure may take a few minutes to complete. • When finished,the lowest channel found will be displayed, Channel Add/Delete Use this feature if Auto Channel Search missed a channel that you would like to add, or added a channel you wish to remove. 1 Open "SETUP MENU" With the DVD in stop mode, press the SETUP button. 2 Select "Channel" Using the up/down and left/right buttons, move the selectioncursor to "Channel Setup', then press ENTER to select. 3 Select "Channel add/delete" Move the selectionbar to "Channel add/delete," then press ENTER to select. 4 Select Channel to addldelete Use the 0-9 buttonsto tune in the channel number you wish to add OF remove. 5 Select "CHANNEL ADD/DELETE" Press right to add or press left to remove the channel from your channel list. • Repeat steps 4 and 5 to add or remove additional channels. RF Output Channel ] 1 Open "SETUP MENU" With the DVD in stop mode, press the SETUP button. 2 Select "Option" Using the up/down and leWright buttons, move the selection cursor to "OpUoo Setup," then press ENTER to select. 3 Select "RF Output Channel" Move the selectionbar to "RF Output Channel", then press right to change. 4 Change "RF Output Channel" Press Return to change. A message will appear on your TV. Then press ENTER to change. 5 Change "TV Channel" A message will appear on your TV. When the message disappears, change your TV to channel 3 or 4 to match the RF output channel of the player. Front Panel Dimmer ] You can set the Front Panel Display all the time, _IN []UBR Opt ion Setup • • power to be bright all the time, dim off. _NU 1 _RETURN dim during Open "SETUP MENU" With the DVD in stop mode, press the SETUP button. 2 Select "Option" Using the up/down and leWrightbuttons,move the selection cursor to "Option Setup." then press ENTER to select. • > (_ ENTER 3 Set "Panel Display" Move the selection bar to "Panel Display," then press rightto select from the following options: • Auto - Front Panel Display wi(I dim automaticallyduring power off. • Bright- Front Panel Display will be bright all the time. • Dim - Front Panel Display will be dim all the time. l Auto Power 1 Open "SETUP Off MENU" With the DVD in stop mode, press the SETUP button. 2 Select "Option" Using the up/down and leWdght buttons, move the selection cursor to "Option Setup," then press ENTER to select. 3 Select "Auto Power Off" Move the selection bar to "Option Setup", then press rightto select from following options: • • Off - Auto power off is disabled, 1Hr- DVD-VCR will auto shut off 1 hour after the last buttonis pressed• • 2Hr- DVD-VCR will auto shut off 2 hours after the last button is pressed. [][]rid Disc Menu Language 1 Follow these steps to choose your preferred language for DVD disc menus. The DVD-VCR will automatically default to the language you choose if it is available on a given DVD. HUR 1 Open "SETUP MENU" With the DVD in stop mode, press the SETUP button, 2 Select "DMD" Using the up/down and left/right buttons, move the selection cursor to "DVD Setup,"then press ENTER to select. 3 Select "Disc Menu" Move the selectionbar to "Disc Menu," then press ENTER to select. 4 Set "Disc Menu Language" Preference Move the selectionbar to your preferred language for DVD disc menus, then press ENTER to select. Audio Language Follow these steps to choose your preferred language for DVD audio soundtracks. The DVD.VCR will automatically default to the language you choose if it is available on a given DVD. 1 Open"SETUP MENU" With the DVD in stop mode, press the SETUP button. RETURN • • _ ENTER 2 Select "DVD" Using the up/down and left/right buttons, move the setection cursor to "DVD Setup," then press ENTER to selecl. 3 Select "Audio" Move the selection bar to "Audio," then press ENTER to select 4 Set "Audio Language" Preference Move the selectionbar to your prefeEredlanguage for DVD audio soundtracks,then press ENTER to select• Subtitle Follow Language these steps to choose your preferred language subtitles. The DVD.VCR will automatically default you choose if it i5 available on a given DVD. 1 Open "SETUP for DVD to the language MENU" With the DVO in stop mode, press the SETUP button. 2 [][]mm Select "DMD" Using the upldown and left/right buttons, move the selection cursor to "DVD Setup," then press ENTER to select. 3 Select "Subtitle" Move the selectionbar to "Subtitle," then press ENTER to select. 4 Set "Subtitle Language" Preference Move the selectionbar to your preferred language for DVD subtitles, then press ENTER to select. Parental MAIN MENU ] Rating Control is a password protected system that allows you to block playback of DVDs based on their content, The system uses an eight level rating system• • If you try to play a DVD that exceeds the selected rating, an error message will appear• • Not all discs are rated. Qmlll DVO _tu p Q RETURN AV q • _EN_R 1 Open "SETUP MENU" With the OVD in stop mode, press the SETUP button 2 Oq,_ Me, nu Audno Sublme Using the up/down and left/rightbuttons, move the selectioncursor to "DVD Setup,"then press ENTER to select. 3 Audio (bpl i¢_,_ Display Opllor'_ RETURN Select "DVD" EPgli_,h Engli_ Aul_n Jm_c Select "Parental" Move the selectionbar to "Parental," then press ENTER to select• • • _1 ENTE_ 4 Select "Use Password" Movetheselectionarrowto"UsePassword," thenpressthe right buttontoselectfrom thefollowingoptions: • NO- Indicatesthat no password is required toview any DVD disc or to change Rating Control options. No additional Rating Control settingsare necessary. , Yes - Indicates that a password is required to view some DVD discs and to view Rating Control options. The menu wil!change as shown. NOTES: _ RETURN _ENTER • The first time "Require Password"is set to "Yes,"you will be prompted to enter a new password. • If the "Enter Password"screen appears, then "Requ=re Password" has already been set to "Yes," Please skip to Step 5 5 Enter Password Enter a 4-digit password using the 0-9 buttons on the remote control. • I]_ R[TURN Write your password down, and keep it in a safe p3ace in case you need it to change your settings later p R E,TN_ 0-9 6 Select "Rating Level" Move the selection bar to "Rating Level." then press ENTER to select. 7 RETURN • • g ENTER Change Rating Level Use the up/down to select one of the fotlowing ratings: • Level 8Adult • Level 4 • Level 7 • Level 3 • Level 6 • Level 2 • Level 5 • Level 1 Kids Safe All ratingsabove the level you select will also be blocked, e.g., if you block Level 6. then Levels 7 and 8 will also be blocked. Press ENTER to confirm your selection. • If you forgot your password, press power on from a cold start with no disc in the unit. Press the REW and F.F buttons simultaneouslyon the front panel for 5 seconds,The "resel ok' message will appear. Press the power button and the DVD-VCR will go to the "Auto Setup" mode. (See page 13) Digital Output If your A/V receiver is equipped with a Dolby Digital decoder, your DVD.VCR can output Dolby Digital 5.1 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers. NOTE: 1 Select "Bitstream " ONLY if you have connected a Dolby Digital-equipped A/V receiver to the Digital Output (optical or coaxial) on the DVD-VCR back panel. Open "SETUP MENU" With the DVD in stop mode, press the SETUP button, 2 Select "DVD" Using the up/down and left/rightbuttons, move the selectioncursor to "DVD Setup," then press ENTER to select. 3 Select "Audio Options" Move the selectionbar to *Audio Options,"then press ENTER to select. 4 Set "Digital Output" Move the selection bar to "Digita_ Output" then press the right button to select from the following options: • PCM - To use your DVD/TV with an AN receiver NOT equipped with a Dolby Digital decoder. • Bitstream - To use your DVDITV with an A/V receiver equipped with a Dolby Digital decoder. [][]mm DTS If your A/V receiver VCR can output is equipped digital feature in the menu system. NOTE: Select ONLY A/V []unm DTS receiver the DVD.VCR 1 "Yes" to the DIGITAL with sound, if you a DTS decoder, but you MUST have connected AUDIO OUT (optical your DVD- enable this a DTS-equipped or coaxial) on back panel. Open"SETUPMENU" With the DVD in stop mode, press the SETUP button. 2 Select "DVD" Using the up/down and le_right buttons,move the selectioncursor to "DVD Setup." then press ENTER to select. 3 Select "Audio Options" Move the selection bar to "Audio Options," then press ENTER to select. 4 Set "DTS" Move the selection bar to "DTS," then press rightto select from the following options: • off- To use your DVD/TV with an AN receiver NOT equipped with a DTS decoder. • on- To use your DVDFrV with an AN receiver equipped with a DTS decoder, Dynamic Dynamic Compression Compression constrains the dynamic range, Le, the difference between the quietest and loudest passages of a DVD soundtrack, This enables you to limit loud noises, such as explosions, or raise the volume whispering, while watching movies late at night, 1 Open "SETUP of quiet passages, such as a movie, This is convenient for viewing MENU" With the DVD in stop mode, press the SETUP button, 2 Select "DVD" Usingthe up/down and left/right buttons,move the selectioncursor to "OVD Setup." then press ENTER to select, 3 Select "Audio Options" Move the selection bar to "Audio Options," then press ENTER to select. 4 Set "Dynamic Compression" Move the selection bar to "Dynamic Compression," then press right to select from the following options: • On - The totaldynamic range of the DVD soundtrack will be compressed, so quiet passages will be louder and loud passages will be softer. • Off- The original dynamic range witl be preserved. TV Aspect Ratio I Set the aspect ratio player will display television. Choose (length x width) of your movies at the appropriate from standard, letterbox, TV screen so the DVD size for your or widescreen 1 Open "SETUP MENU" With the DVD in stop mode. press the SETUP button. 2 Select "DVD" format. Using the up/down and leftJright buttons, move the selectioncursor to "DVD Setup," then press ENTER to select, 3 Set "Display Options" Move the selectionbar to "Display Options", then press ENTER to select. 4 Set "TV Aspect" Move the selection arrow to "TV Aspect", then press ENTER to RETURN • • Q ENTER select from the following options: • 4:3 Letterbox - This method displays the full width of the widescreen movie on a standard 4:3 lelevision. As a result, black bars will appear at the top and bottom of the screen. • 4;3 Pan-Scan - The familiar way of watching DVD and VHS movies, this method selectivelycrops (by panning and scanning to keep the most important part of the picturevisible) wide screen movies to fit a standard 4:3 television screen, • la 16:9 Widescreen- This method allows you to view the full 16:9 pictureon a widescreen tetevision. Black Level The Black Level feature adjusts the reference level of black in the video signal to one of two choices: • Low. Standard NTSC black level. Yields consistent contrast • High. 1 through all sources, Enhanced black level, for increased contrast during DVD playback. Open "SETUP MENU" With the DVD in stop mode, press the SETUP button. 2 Select "DVD" Usingthe up/down and left/righl buttons,move the selectioncursor to "DVD Setup," then press ENTER to select. 3 Set "Display Options" Move the selection bar to "Display Options', then press ENTER to select. 4 Set "Black Level" Move the selection bar to "Black Level," then press right to select from the following options: • Low - Standard NTSC reference Black Level for consistent brightness/contrast across all sources. • High - Enhanced Black Level for increasedbrightness/contrast when viewing DVDs. AIt Video Out If you connected your DVD-VCR to your television using the S-VIDEO OUT or COMPONENT VIDEO OUT jacks, you MUST set the "AIt (alternative) Video Out" selection in the on-screen menu system. • TheS-VideoorComponent DVD player. The tuner RE or line outputs. I Open "SETUP Videoconnectionisonlyforthe and VCR will still be viewed through the MENU" With the OVD in stopmode. press the SETUP button. 2 Select "DVD" Using the up/down and le_right buttons, move the selectioncursor to "DVD Setup," then press ENTER to select, 3 Set "Display Options" Move the selectionbar to "Display Options",then press ENTER to select. 4 Select "Alt Video Out" Move lhe selectionbar to "AItVideo Out," then press right to se_ecl from the followingoptions: • S-Video - Indicatesthat you are using the S-VIDEO OUT jack on the rear panel to connect Io your TV. • Component- Indicatesthat you are using the COMPONENT VIDEO OUT jacks on the rear panel to connect _oyour TV. Dmm A/V Receiver Connections ] To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD.VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers. Before You Begin... To Digital Audio Input of an AN Recoiver with a Do]by Digital Decoder • If your A/V receiver IS equipped with a Dolby Digital Decoder, you have the option to bypass the DVD-VCR's built.in Dolby Digital Decoder. Use the DIGITAL AUDIO OUT connection below. Digital Audio Out ConnectEITHERan opticalcableOR a digitalcoaxialcablefrom the DIGITALAUDIOGUT jackson thebackpaneloftheDVD-VCR totheircorresponding DigitalAudioInputjackson yourAN Receiver: • Optical . Coaxial • Use whichever connectionis available on your AJVReceiver. / I Special Playback During DVD/CD playback special playb#ck options. (Play/Pause) 1 Features you can select from To resume normal the following playback, press the b,-n button, Still Press the I_11(Play/Pause) button on the remote contr01dottng playback. • The picture will pause and the audiowill mute. • To resume playback, press the I_11 (Play/Pause) button. • If the player is ]eft in Pause mode for 5 minutes, it will stop automatically. 2 Frame Advance {Step) While in Stilt mode, press the F.ADV/SKfP buttonon the remote controlto advance one frame at a time. • Audio is muted during Frame Advance mode. • Press IP-ll (Play/Pause) to resume normal playback. NOTE: Frame A_vance operates only in the forward _irection. Skip ForwardlBack While a CO or OVO diec is in Play mode, press the S;'Jp Forward/Back (),,_./44 ) buttonson the remote controlor font panel to jump forward and backward throughdisc chapters/tracks. • Skip Forward will jump to the next chapter/track. • Skip Back will jump to the beginningof the current chapter/track. • Press Skip Back again tojump to the beginningof the previous chapter/track. Search Forward/Back While a disc is in Play mode, press and hold the Forward/Back (),e./441) buttonson the remote controlor front panel to visually search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed. Press l_tt (PiaylPause) button to resume normalspeed. 4 Slow Motion During playback, press the I_.ll (P_ay/Pause')button _oStill the image, Then use the Search Forward ()e,) to play in slow motion at variable speeds. • Each press increases the slow motion speed playback to 118,1/4 or 1/2 normal speed. • AL_dieis muted during stow motion playback. • Fronl Panel Slow Motion Buttons- Press and hold the Forward butlons on the front panel to activate slow motion playback, Press the I=,.|1{P_ay/Pause) button to resume normalp_ayback. Stop/Resume • Press the Stop button once to stop playback. To resume the OVD/CD from the point where the disc stepped, press the I=,-II (Play/Pause) button. • Press the I (Stop) button twice to completelystop playback. The next time you press I=,-II(Play/Pause), the disc will start over from the beginning. Disc Menu Navigation I Many DVDs feature their own menu systems, where you can select Titles, Chapters, Audio Tracks, Subtitles, and special disc features, such as movie trailers, and information on the cast. Use these buttons to make selections in the Disc menus. 1 DISC MENU Button Press to access the DVD's Disc menu, if applicable. 2 Press. , options. or " , 0 to navigate through DVD's Disc menu • Press up, down, left and right to highlight menu choices. 3 ENTER Button Press to make your selections in the Disc menu. 4 TITLE Button Press to access the DVD's Title menu, if applicable. Screen Fit Playback 1 ! SCREEN FIT Button During play. press SCREEN FiT button on the remotecontrol • Allowsyou to eliminate the black bars in the top and bottomof the screen when a movie is playing in the Widescreen format (16:9). • Screen Fit will not work when the Zoom mode is active. (you can not remove the black bars on the screen)..However, Zoom mode wi!l work when Screen Fit is active. • Various aspect ratios are availabte only in multiple screen format discs • This function does not work when a DVD has been recorded in a multi-camera angle format • On some DVDs, the black bars cannot be etiminated due 1o their aspect ratio Title/Chapter/Time Selection If you press the DlSPLA Y button during DVD playback, you can view the current Title, Chapter/Track, and counter position. You can also use this screen Chapter[Track, 1 as shortcut or counter position to select any Title, on the disc. View DVD/CD Display Press the DISPLAY button on the remote controlduring DVD/CD playback. Select Title Press the up/down and left/right buttons to select Title, then press ENTER to change among all available titleson the disc. • The "TITLE" iconwill light on the Front Panel Display, followed by the current title number, hours, minutes, and seconds. Select Chapter or Track Press the up/down and left/rightbuttonsto select Chapter or Track, then press ENTER to change among all available Chapters/Tracks on the disc. • The "CHAP" iconwitl light on the Front Panel Display, followed by the current titlenumber, hours, minutes, and seconds. 4 Select Counter PosJtion Press the up/down and left/right buttonsto select the counter position indicator,then use the number buttons(0-9) to enter the desired counter positionin theformat HH:MM:SS (H = Hours, M = Minutes, S = Seconds). Then press ENTER to enter the desired counterposition, J Zoom You can zoom in at 2 or 4 times the normal magnification while watching a DVD. 1 Open Zoom Magnifying Glass During Playback or STILL mode, press the ZOOM button to display the "Magnifying Glass icon" on the screen. 2 Position Magnifying Use the .... Glass " , a buttons to move the magnifying glass to any positionon the screen you want to zoom. 3 Zoom In Press the ENTER button repeatedly to zoom in at 2X - 4X - 2X + and normal magnification. Angle ! different perspectives, or angles, while watching a Some DVDs allow .you to view the same scene from movie. Press the ANGLE button to activate this feature, 1 Check for Angle Marker If multiple Angles are available on the DVD, the Angte mark wilt appear on the screen during playback. 2 View Angte Options If the Angle mark is present, press the ANGLE button to view the Angle Selection menu. P 3 Select Screen Angle Press the up/down buttons to select one of the available screen angles. I Subtitle Many DVDs provide subtitles in one or more languages. The SUBTITLE button provides a shortcut to view and select these options. 1 Open Subtitle Menu During playback, press the SUBTITLE button. Set Subtitle Language Press the up/down buttons to select among all available subtitle languages. • Subtitle languages are often represented by abbreviations. Activate Subtitles PresstheleftJrightbuttonstoturnsubtitlesOn or Off, • The default subtitlesetting is Off, • Press the ENTER button to confirmyour selection. Digest Playback DIGEST Button During playback, press the DIGEST button. • You'll see the 9 individual windows representing each of the chapters on the TV screen. • When each window is displayed, thefirst 3 seconds of the chaplet will be played. 2 Set DIGEST Press the upfdown buttons and left/right buttons or NUMBER button to select the window you'd like to see, and press ENTER. • Up to 9 windows(chapters) can be displayed on the screen at a time Press =o for the next 9 chapters if the movie has more than 9. _" You can start playback desired chap[er •' 'DIGEST' use of the DVD may not operate depending player from [he on the disc in A-B Repeat I The A.B Repeat function DVD or CD. Simply point (B) of the segment 1 mark allows you to repeat the beginning you want point any segment of a (A) and the ending to review. Select A-B Repeat Function tn Play mode, pressthe REPEAT button, then press left#ight to select A-B Repeat. • "A-" will highlightwhen A-B Repeat is selected. NOTE: If you are playing a CD, the menu will display "Track" in place of'Chapter" 2 Mark the Starting Point Press the ENTER button at the beginningof the segment you went to repeat (Point A). • "B" will highlightafter Point A is selected, NOTE: The minimum AB Repeat time is 5 seconds. Mark the Ending Point Press the ENTER button again at the end of the segment you want to repeat (Point B), • The segment will begin repeatingin a continuous loop. Cancel A-B Repeat Press the REPEAT button to open the Repeat Menu, press left/right to highlight "Off," then press the ENTER button. Repeat Chapter/Title You can repeat a single chapter, or repeat a complete title. 1 Open Repeat Menu In Play mode, press the REPEAT button to open the Repeat menu. , The current Repeat Mode will highlighted. 2 Select "Chapter" Press the left/right buttonsto select "Chapter" • "Chapter" will highlightwhen Chapter Repeat is selected. 3 Repeat Chapter Press the ENTER button to repeat the current chaptedtreck. 4 Select "Title" Press the leftJdght buttons to select "Title". • "Title"will highlightwhen Title Repeat is selected 5 Repeat Title Press the ENTER button to repeat the titSe. L Audio Many DVDs such as Dolby provide audio. The AUDIO among aft available 1 multiple Digital language 5.1, Dolby button options and audio setup options, Pro Logic, provides or LPCM a shortcut for a given 2 Channel to view and select disc. Open the Audio Menu During playback, press the AUDIO button on the remote control. Select DVD Audio Track Press the up/down buttonsto select the desired language/audio setup on the DVD. • Languages are represented by abbreviations;i.e. "ESP" for "espef_ol." Bookmarks You can insert jump quickly up to three Bookmarks to your favorite on your DVDs, so you can scene or song, I Open Bookmark Menu Ouri_ playback, press the _ARK button _,_ the remote Control The "Mark" header will appear on the screen. 2 Select Bookmark Placeholder Press the iefVdghtbuttons to move to one of the three bookmark placeholders (- - -). • 3"he selected placeholder will highlight. 3 Set the Bookmark Ray the DVDto thesceneyouwanttobookmark, thenpressthe ENTERbutton,Theplacaholder willchangetoa number(1.2 or 3). , You can continue setting up to three bookmarks. • When finished, press the MARK button to exit. • Depending on the disc, the bookmark function may not work. Play Bookmark • Dudng playback, press the MARK buttonon the remote control. • Presstheto,right buttonstomove toa previously setbookmark, • Press the PlaylPause button to play the bookmark, • Press the CLEAR button to cancel thebookmark. • Press the MARK button again to exit the Bookmark menu. l Programmed Playback Programmed Playback lets you set a custom order for playback of chapters/tracks on a DVD or CD. 1 Open Playback Mode Menu While in Stop mode, press the MODE button. 2 Select "PROGRAM" Using the lefUdght buttons, move the selection bar to "PROGRAM" then press ENTER to select. 3 Select Chapter/Track Press the up/down and left/right buttons to select the first chapter/track in your revised playback Ust.then press the ENTER button. 4 Program Playback Order Use the up/down and left/right buttons to select the remaining chapters/tracks, pressing Enter after each. • Press the CLEAR button to change selections, 5 Play Revised Order Press the c_II (Play/Pause) button,The disc will play back in the custom programmed order, • While in playback mode, press the CLEAR button on the remote control to cancel Programmed Play. _102 03 _ 07 11 08 1Z (T:01)16_ 1_ - b 05 IO 13Chep t4 _R[TLIIN 04 QC_R ...... p_c_ram _[NTEI Otoer OPLAy Random ] Playback DVD Random Playback lets the DVD-VCR set a random order for playback of chapters/tracks on a DVD or CD. 1 Open Playback Mode Menu In Stop mode. press the MODE button. Select "RANDOM" Using the leftJright buttons,move the selectionarrow to "Random Play," then press ENTER to select. • 3 The disc will playback automatically in random order. Cancel Random Play Press the CLEAR button on the remote controlto cancel Random Play. MP3 Playback MP3 is a popular music format which allows you to compress music files up to 1/12 of their original size while retaining near CD quality sound. Your DVD.VCR can playback MP3 files burned onto a CD-R disc. 1 Insert Disc Insert a CD-R with MP3 files into the DVD deck. • 2 The MP3 main menu will appear after a few secondsand the first song on the disc will begin playing. Select Folder Press the up/down buttons to select the folder on the CD-R which contains the MP3 files you want to hear, then press Enter to select. • If there are more than 8 folders on the disc, press RETURN to view additional folders. • If there are no folders on the CD-R. skip to Step 3. 3 Select MP3 File Press the up/down buttonsto select the desired MP3 tile. • • ° 4 Play MP3 File Press the ENTER button on the remote control to play the selected song. . 5 t If there are more than 8 MP3 files'in the selected folder, press the leWrightbuttons to view additionalMP3 files. File names are truncated to eight characters: the first six characters of the song, plus an asterisk ('), then a number Press the Relurn button to back up and select another folder. While the song is playing, you can use the up/down buttons to browse throughother folders. Stop MP3 Selection Press the • (Stop) button on the remote control to stop p_ayback. • To ensure proper playback of discs burned from MP3 tiles, make sl_re the files have been recorded at a b_trate of at least 128 kbps • It lhere are an), gaps (blank data) on muni-sess_ondiscs, you may experience playback problems • On discs that _ff recorded with a Variable B_IRate(VBR).e g from 32 _o 320 kbps, the sound may cut in and out I3D 30 Sound Audio Surround is an enhanced 5ound audio mode that creates the illusion of with only two speakers. Open 3D Sound Menu During playback of a DVD, pressthe 3D SOUND buttonon the remote control. 2 Set 3D Sound Press the up/down buttonsto set "3D Sound"On or Off, then press the 3D SOUND button to confirmyour selection. ,s I While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Skip, Repeat, and more. Press the Play button again to resume normal playback. PLAY 1 Still FromPlaymode,pressPlay/Pauseto stillasingle frame, 2 Frame Advance From s_t$ mode, press SKiP/F.ADV to advance to the next frame. 3 Cue/Revlew From Ray mode, press F.Forward (=c) or Rewind (-) to cue/review at two speeds: • Picture Search -- Press and release to advance the tape forward or backward at 5 times normal speed. • Jet Search -- Press and hold to advance the tape forward or backward at 7 times normal speed. 4 Skip FromPlay mode, press Skip/F.ADV tocue ahead exactly 30 seconds. Press Skip repeatedly up to 4 times to cue ahead 2 minutes. 5 Repeat From Play mode, press Repeat to review the last 5 secondsof lape (SP mode). 6 Shuttle From Play mode, Shutde >> gradually increases the cue speed from Double-Speed playback to Picture Search to Jet Search• Shuttle << gradually slowsdown the tape, then goes into Slow mode, Stitl mode. Reverse P_ctureSearch and Reverse Jet Search• Tracking The Tracking appear decks, with the playback tracking 1 adjustment during playback The TRK button removes the white lines that sometimes because of slight differences in recording will automatically align the recorded tracks heads to solve this problem. You may also set manually. Adjust Tracking Manually During playback, press the TRK ,, or "_RK white lines out of the picture, buttons to move the I AutoPlay If you want your them, NOTE: videotapes turn on Auto to play automatically when you insert Play, Only tapes that are missing the Record Safety Tab wifl play automatically when inserted. 1 Open the "SETUP MENU" With the DVD in stop mode. press the SETUP button. 2 Select "VCR" Using the up/down and lefUdghtbuttons, move the selectionarrow to "VCR FunctionSetup," then press ENTER to select, 3 Select "Auto Play" Move the selection arrow to "Auto Play." then press rightto select from the following options: , On - The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of thecassette has been removed. • Off _ Auto play is disabled. MAIN _NU QBm _RETURN " • gaENTER VC_ FUNCTION srruP Tape Length Press the left button to select the video cassette length. This informationis usually printed on the tape box, The menu cyclesthrough: T120, T160 or T18g. Once the type of cassette is set, the VCR can display the amount oftime remaining on the tape when you press the DISPLAY button. Auto Repeat In the VCR FUNCTION SET UP" Auto Repeat" sets the VCR to play a tape repeatedly [unless a tape controlis activated (stop, fast forward or rewind)]. S-VHS Playback The DVD-VCR allows you to playback high quality S. VH5 tapes. 1 Insert a S-VHS Tape Insert an S-VHS tape into the VCR deck. 2 Start Playback Press Play/Pause on the remote controlto begin playbackof the S-VHS tape. Tape Ler_h ........ Auto Repeal RETURN TI20 Off Variable Search System ] Press the SEARCH button to display the search screen in the stop mode. When a program is recorded, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs. If the VCR has trouble finding a mark, it isprobably because the cassette was recorded on a VCR without VISS. If you want to index two programs in a row, set your VCR to stop, then start recording each program. Pause has no effect on index marks. Scan and play Usescanandplaywhenyoudon't knowexactlywherea program islocatedon a cassettetape. • Press rightarrow for forward scan or left arrow for reverse scan. • The display will show"Scan and Play". • When an index mark is found, the VCR plays for about five seconds. • Press the PLAY button to view that program, If you don't press PLAY, the VCR automaticallysearchesfor the next index, or until the end of the tape is reached. GO to 0:00:00 stop Use thisfeature when you want to search for the O:OO:O0 counter positionon a cassette, Press the CLEAR button at the point on the tape where you want to set the counter to 0:00:00. Later, while s cassette is stopped, press up arrow button. The VCR will rewind or fast forward, searching for the O:OO:O0counter position, and then automatically stop at that position. 3 End search Use thisfeature when you want to search for a blank position to record a programon a cassette. While a cassette is stopped, press down arrow button. Ti_e VCR will fast forward, searching for a blank position, antt then automatically stop at that position. if the VCR reaches the end of the tape dudngend search, the tape will be ejected Basic Recording You can record a TV show in progress by inserting a blank tape and pressing the REC button. You can even add time in 30ominute increments up to 4 hours by pressing the REC button repeatedly; see page 49. NOTE: Be sure you videotape has a Record Safety is missing, you can cover the opening with tape. Warning: sure you Do not cover want to record over this opening Tab. If the tab a small piece of unless you are the tape. Before You Begin... • Power on the DVD.VCR • Power on the TV • Set the TV to channel 3 or 4, 1 Insert Tape Insert a blank VHS tape into the VCR deck • Make sure the tape is long enough to recordthe entire program. To change the Recording Speed, see page 49. 2 Select a Channel to Record Use the 0-g buttons or the Channel Up/Down arrow buttons to select the desired channel, or press the INPUT SEt button to select Line 1 or 2 if recording from an external device connected 1o the front or rear Line inputs, respectively. 3 ! Start Recording Press Ihe REC button on the remote controlor front panel. For options while recording is in progress, see "Special Recording Features"on the next page. _" Recording possible [rum the DVD player to the VCR is not i Special Recording Features While a recording watch a DVD, 1 1 is in progress, or add recording you can watch time in 30.minute a different channel, increments. PauselResumeRecording Press _heb,,-II(PlaylPause) button. Press REC again to resume. 2 Stop Recording Pressthe STOP button. 3 Watch a Different Channel Press the TV/VCR button on the remote to switch to your TV tunel then select a different channel on your television. 4 To Watch a DVD Insert a DVD in the DVD deck and press Play. The output will automalicallychange to the DVD. 5 Add Recording Time See One-Touch Recording (OTR) on the next page. lone-Touch Recording (OTR) One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 4 hours at the touch of a button. RECORD 1 Start Recording Follow the instructionson page 47 to begin recording. 2 Activate OTR While in Record mode, press the REC button again to activate One-Touch Recording (OTR) • Record length 0:30 appears on the On-Screen Display and the DVD-VCR will record for exactly 30 minutes. 3 Add Recording Time Continue pressing REC to add recording time in 30 minute increments up to 4 hours. • The DVD-VCR stops recording automatically when the time has elapsed, I Record Speed You can slow down the recording speed from SP to $LP in order to fit six hours of programming on a T-120 tape. 1 Start Recording Follow the Basic Recording instructionson page 47. Set Record Speed Press the SPEED button on the remote contro_to set the Record Speed to one of the following options: • SP - Standard Play, for best quality. • SLP - Super Long Play, for maximum recording time (3 times SP). NOTE: The selected Record Speed will appear on the front panel display and on-screen display. Maximum Tape Length Recording Time - SP vs. SLP SP (Standard Play) SLP (Super Long Play) T- 120 2 hrs 6 h_ T-t60 2hrs 40 rnins 8 hrs T- ] 80 3 hrs 9 hrs How to Set a Timer Recording 1 Insert a blank tape with a Record Safety Tab into the VCR deck. The Timer Recording Feature allows you to program up to 8 events at a time to record up to a month Jet the TV to channel 3 or 4. in advance. Before You Begin... Ulil!lil • Power on the DVD.VCR • Power on the TV 1 Open "SETUP MENU" With the DVD in stop mode, press the SETUP button or press the TIMER button. 2 Select "Program" Using the up/down and left/rightbuttons,move the selectioncursor to "Set Timer Recording,"then press ENTER to selech 3 Select Channel Number Press right and up/down buttonsto set the charmer,Press the right button to move to the next setting, 4 Set "TimelDate/Speed" Repeat step 3 to set stari time, end time. date and record speed. Date can be set for one time, daily or weekly recording. See below. 5 Save "Timer Recording" Press the RETURN button to complete programming of the timer recording. Stop the VCR or turn the power off. The timer indicator comes on the VCR. The VCR will automatically turn on and beg_n recording at the time you set. To stop a timer recording, press the POWER button or STOP button on the VCR. 6 Auto Speed Select If you are not sure the tape is long enough for timer program recording in the SP tape speed, set the recording tape speed to "AUTO". Recording starts in the SP tape speed. If the tape length is not long enough, the tape speed automatically changes from SP Io SLP. 7 Daily/Weekly Date Programming Weekly [SUN'S-SAT'S]: You can record TV programs on the same channel at the same time every week. Daily [MO I,,.FR] : You can record TV programs on the same channel at the same time every day Monday through Friday I S-Video/Component The S-Video player. or Component The tuner and line inputs. You must follow activate the "Air Video You can choose EITHER television inputst you with your 1 Video connection VCR will still be viewed your alternative If your Out" (S-Video, superior is only for the DVD through instructions Component) with 5.Video video quality the RF or on page 31 to video selection. OR Component, S.Video is equipped can enjoy Video Connections but NOT or Component when watching both, Video DVDs DVD.VCR, Connect S-VIDEO OUT to "IV Connect an S-Video cable from the S-VIDEO OUT on the back panel of the DVD-VCR to the S-Video Input on your television. 2 Connect Component Video Out to TV Connect a component video cable from the COMPONENT VIDEO OUT (Y, Pb, Pr) on the back panel of the DVD-VCR to the Component Video Input on your television, 3 Connect Audio Out (DVD only) Connect RCA audio cables from the Left/Right Line Out jacks on the back panel of the DVDNCR to the Left/Right Audio Line In jacks on your television, • You must use these Line Out jacks when connecting the DVDVCR Io your TV with the S-Video or Component Video Output. . Please refer to "Air Video Out" on page 31 to activate your connection. (for DVD) Stereo Connections 1 You can enjoy stereo sound when watching movies and TV shows by connecting your D VD. VCR to your home stereo system or stereo TV. 1 Connect DVD.VCR to Stereo Connect RCA cables from the Line Out Left & Right Audio jacks on the back panel of the DVD-VCR to lhe Auxiliary Inputs on your stereo receiver. If you are using a stereo television, connect the Video Output as well. 2 Set Stereo to Auxiliary Mode Set your stereo receiver or television to "Aux" or "Tape," whichever selects the line input for your particular device. 3 Play a Tape Insert a DVD or Hi-Fi stereo videotape in your system and adjust the volume on your stereo receiver or television. You should hear the audio throughyour stereo speakers• • If you still do not hear stereo sound after inserting Hi-Fi stereo video tape, press the Audio button until "Hi-Fi" appears on the on-screen display• I Monitor TV Connections Monitor.style televisions offer improved regular televisions because they receive directly NOTE: from the DVD-VCR through sound and picture over the audio and video signals the line inputs, A monitor television is not the same as a computer monitor. 1 Connect VCR to Monitor TV Connect RCA cables from the Audio/Video Line Out jacks on the back panel of the DVD-VCR to the AudioNideo Line Inputs of your monitor TV. 2 Set "IV to Auxiliary Mode Set your monitor TV to "Aux," "Video,"or "Line," Refer to your monitor television owner's manual forthe correctsetting. 3 Connection is Complete NOTE: With this connection, the TVNCR button has no effect. It is as if the TV/VCR button were always set to VCR. Connecting Other Video Equipment You can connect a wide variety of audio/video DVD.VCR, including: An additional VCR equipment to your Laser Disc Player DVD Player Carncorder Satellite Receiver Video Game Since aft of these devices use essentially the same connections, they will be described together. TV AudioNideo Outputs of External Device Connect Device to DVD-VCR Connect RCA cables from the Audio and Video Line Outputs of your external device to the Audio end Video Line Inputs on the front or back panel of the DVD*VCR. Watch Device PLayyour extemaqdevice, then press the Input SeJ.button until the playback from LINE1 (rear panel inputs) or LINE2 (front panel inputs) appears on your TV screen• 3 Record Device First, play your external device. Next, press the Input Sel. button until the playback from LINE1 (rear pane] inputs)or LINE2 (front panel inputs)appears on your TV screen, Then press Record on the VCR deck, 4 Timer Record From Device Select LINE1 (L1) or LINE2 (L2) as your record source in the Timer Record menu. All other'Timer Record settings shouldbe sel in the usual manner. Technical Inputs Specifications AUDIO 2 Stereo audio inputs, RCA Connector, -8dbm, 47K0. front and rear VIDEO 2 Composite video inputs, RCA Connector, 75_, 1VI>p RF Antenna or CATV Input, F-Connector, 75_ AUDIO 1 Stereo audio outputs,RCA Connector, -8dbm, 1.5K_ AUDIO (DVD only) 2 Digital audio outputs (1 optical 1 coaxial) I Stereo audio outputs Outputs VIDEO 1 Composite video output, RCA Connector, 750. 1Vp-p VIDEO (DVD only) 1 S-Video output, S-Connector, 75_, Y=l.OVp-p, C=0.286Vp-p 1 Component video output, 75q, Y=l.0Vp-p, Pb=O.7Vp-p, Pr=0.7Vp-p VCR RF Channel 3 or4 VIDEO SYSTEM 1/2-inchVHS system,4 rotar/head helical scanning; FM azimuthluminance;chrsminance: convertedsubsystem phase shift AUDIO TRACK Normal: 1 Irack; Hi-Fi: 2 track I_LAY/RECORD TIME T-180 tape: SP 3 hours, SLP 9 hours FF/REW TIME T-120 tape: <2 minutes HEADS Video: DA 4 rotary Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear) Control:t stationaryhead Erase: 1 full track, 1 audiotrack WOW & FLUTTER Less than 0.005% (Hi-Fi) FREQ• RESPONSE 20-20,000 Hz (Hi-Fi) DISC COMPATIBILITY CD, CD-R, CD-R/W DVD-Video, CD-Digital Audio (5" and 3.5"), CD-Video, MP3 files on CD-ROM DVD SYSTEM FREQ. RESPONSE 96/48 kHz Sampling: 4 Hz.22kHz SIN RATIO 110dB DYNAMIC RANGE 96 dB THD 0.003 % POWER REQUIREMENT 120V AC, 60 HZ, 25 watts ENVIRONMENT 41o104 F (5-40 C); 10%-75% humidity WEIGHT 21.5 Ibs. !; ii!ii ¸ Warranty (for USA users only) ThisSAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty period: One (1) Year Parts and Labor This limited warranty used in the United Warranty begins on the original date of purchase, repairs must be performed by SAMSUNG's will repair parts, if found or replace to be defective during the warranty determination free operation products any product All replaced to SAMSUNG. warranty original covers manufacturing damage occurs in shipment; applications which or problems abuse, which neglect, misapplication, or surges; damage peripheral; product alteration or unauthorized repair; follow instructions, covered operating and prescribed accessories or equipment to incompatibility and shall not apply fire, water, caused which damage with other equipment. uninterrupted or error- of SAMSUNG and and workmanship encountered including, this product not supplied or faulty is longer. was not intended; by SAMSUNG; acts of nature; installation; in normal, but not timited to: accidents, incorrect improper electrical connection failures misuse, line voltage, with af_y improper or exterior customer adjustments, in the instruction SAMSUNG the property to the following, lightning or other or modification; designated must contact does not warrant and uses for which by improper cosmetic damage The product must be to SAMSUNG's or ninety (90) days, whichever are caused by products or equipment fluctuations with new or reconditioned specified above. become defects in materials use of this product to SAMSUNG parts and warranty, noncommercial of purchase service, the purchaser SAMSUNG and of the purchaser. charges prepaid parts and products Replacement assume the remaining This limited period for warranty and service procedures. of the product. must be returned warranty purchased service center. To receive warranty at our option and at no charge the limited period with transportation service center. Prior to returning for problem this product, during on products removaE or reinstallation. upon request as proof to and from the service center is the responsibility SAMSUNG returned installation, authorized service, the original dated bill of sale must be presented or SAMSUNG's authorized service center. Transportation and is valid only States, and does not include transportation, finish; product maintenance book; use of non-SAMSUNG this product with altered serial numbers; and environmental instructions or unauthorized or result in service problems; failure to that are parts, supplies, failures or problems due SAMSUNG ELECTRONICS AMERICA, INC. HEADQUARTERS 105 Challenger Road, Ridgefield Park, N.J. 07660-0511 TEL: 1-800-SAMSUNG SERVICE DIVISION 400 Valley Road, Suite 201, Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) ELECTRONICS AC68-01816A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 57 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Mon Apr 02 19:46:26 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools