Samsung DVD V5500 User Manual DVD/VCR Manuals And Guides L0520893
SAMSUNG DVD/VCR Combo Manual L0520893 SAMSUNG DVD/VCR Combo Owner's Manual, SAMSUNG DVD/VCR Combo installation guides
User Manual: Samsung DVD-V5500 DVD-V5500 SAMSUNG DVD/VCR - Manuals and Guides View the owners manual for your SAMSUNG DVD/VCR #DVDV5500. Home:Electronics Parts:Samsung Parts:Samsung DVD/VCR Manual
Open the PDF directly: View PDF 
.
Page Count: 85
| Download | |
| Open PDF In Browser | View PDF |
I
SAFETY
INSTRUCTIONS
Safety
Instructions
1
This symbol is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product*s
enclosure that may be of sufficient magnitude to constitute a
risk d fire or electric shock to persons
CAUTION: TO REDU¢5 THE RIME O5 5LMCTMIM
5HOOK, GO MOT_MMOVM ¢OVMR {OF MACK),
GO UMMR MMRVIOMABLMMA_TMJNMIO&
MMFMMMMMV_MING
TO QUALIF_MDMMMVIC5
PMMMONNML,
This symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
Note to OATV system installer: This reminder is provided to call OATV system installers attention to Article
820-40 of the Nafional Electrical Code (Section 54 ot Canadian Electrical Code, Part I) that provides guidelines
for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Caution: FOO regulations state that any unauthorized changes or modifications to this equipment may void the
user's authority to operate it.
Caution: To prevent electric shock:, match wide blade of plug to wide slot, fully insert
Attention: Pour eviter les chocs electriques introduire la lame le plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu au fond
mmportant: One Federal Court has held that unauthorized recording of copyrighted TV programs is an
infringement of US copyright laws Certain Canadian programs may be copyrighted and any unauthorized
recording in whole or in part may be a violation of these rights.
To prevent damage which may result in fire or electric shock hazard,
do not expose this appliance to rain or moisture,
important
1
2
3
4.
5.
6
7
8
9
10
11
12
13
14
Safety
instructions
Read these instructions.
Keep these instructions
Heed allwarnings
Follow all instructions.
Do not use this apparatus near water
Clean only with dry cloth.
Do not block any ventilationopenings. Install in accordance with the manufacturers instructions.
Do not install near any heat sourcessuch as radiators, heat registers, stoves or other apparatus (including
amplifiers) that produce heat
Do not defeat the safety purpose of the polarizedor grounding-typeplug. A polarizedplug has two blades with
one wider than the other A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety If the provided plug does not fit into your outlet, consult an electrician
for replacementof the obsoleteoutlet.
Protect the power cord from being walked on or pinchedparticularly at plugs convenience receptacles,and the
point where they exit from the apparatus
Only use aftachments/accessoriesspecifiedby the manufacturer
Use only with cart, stand, tripod bracket, or table specified by the manufacturer,or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatuscombinationto avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time
Refer all sewicing to qualified service personnel Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquidhas been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture,does not operate normally,or has been dropped.
ENG-2
BEFORE
Before
you
YOU
8TART
start
Accessories
Remote Control
(AK59-000210)
InstaJ|
Batteries-2EA
1.5V(AAA)
(AC43-12002H)
Balletic8
in the
Video/Audio Cable
(AC97-01746A)
Remote
Antenna Cable
(AC39-42001J)
Control
1
Dpen -me ea[[erl cover on
the back of the remote
I
3on[roi.
_nsenlwo AAA battenes
'_lake sure _na[_ne
polarities (+ and -/are
allgneo correcw.
3
Replace lee Datter_
cover.
If the remote control doesn't operate properly:
,, Check the polarity +, - of the batteries (Dry-Cell)
B Check if the batteries are drained.
,, Check if remote control sensor is blocked by obstacles.
,, Check if there is any fluorescent lighting nearby.
ENG-3
User's Guide
Registration Card
I
TABLE
Table
of
OF
CONTENTS
1
Contents
Safety Instructions ........................................................................................................................................
2
Important Safety Instructions ................................................................................................................ 2
Before you start ............................................................................................................................................ 3
Accessories ........................................................................................................................................... 3
Install Batteries in the Remote Control .................................................................................................. 3
Chapter
1 : Setup
General Features............................................................................................................................................
6
Disc Type and Characteristics ........................................................................................................................ 7
Description ...................................................................................................................................................... 8
Tour of the Remote Control .................................................................................................................. 10
Chapter
2:
Connections
Connecting the Antenna Cable ................................................................................................................... 11
Method1: Antenna + DVD-VOR + TV: No Cable box .......................................................................... 11
Method2: Antenna + DVD-VOR + TV: Cable box with many scrambled channels .............................. 12
Method3: Antenna + DVD-VOR + TV: Cable box with a few scrambled channels .............................. 12
Before Connecting the DVD-VCR .............................................................................................................. 13
Connection to a TV ...................................................................................................................................... 13
Connection to a TV (Video) .................................................................................................................. 13
Connection to a TV (S-Video) ............................................................................................................ 14
Connection to a TV (interlace) ............................................................................................................ 15
Connection to a TV (Progressive) ........................................................................................................ 16
Connection to an Audio System .................................................................................................................
17
Connection to an Audio System (2 Channel Amplifier) ........................................................................ 17
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) .......................................... 18
Connecting a Power Cord & Auto Setup ...................................................................................................... 19
Chapter
3:
Initial
Setup
Selecting a Menu Language ........................................................................................................................ 20
Setting the Clock ........................................................................................................................................ 21
Setting the Clock Automatically ............................................................................................................ 21
Setting the Clock Manually ................................................................................................................ 22
Memorizing the Channel .............................................................................................................................. 24
Selecting the Video SignaFsource ...................................................................................................... 24
Storing Channels in Memory (Automatic Method) .............................................................................. 25
Adding and Erasing Channels (Manual Method) ................................................................................ 25
Selecting the RF Output Channel ................................................................................................................ 26
Selecting the Front Panel Display .............................................................................................................. 27
Setting the Power Off Automatically ............................................................................................................ 28
ENG-4
Chapter
4:
TABLE
OF CONTENTS
DVD
Operations
Playing a Disc .............................................................................................................................................. 29
Using the Search and Skip Functions ........................................................................................................ 31
Using the Display Function .......................................................................................................................... 32
Using the Disc and Title Menu (DVD) .......................................................................................................... 34
Using the Function Menu (DVD) .................................................................................................................. 35
Repeat Play ................................................................................................................................................
Slew Repeat Play ........................................................................................................................................
36
38
Adjusting the Aspect Ratio (EZ View) .......................................................................................................... 39
Selecting the Audio Language ................................................................................................................... 41
Selecting the Subtitle Language ...............................................................................................................
Changing the Oamera Angle .....................................................................................................................
42
43
Using the Bookmark Function ...................................................................................................................
Using the Zoom Function (DVD) .................................................................................................................
43
45
Clips Menu for MP3/WMA/JPEG ...............................................................................................................
Folder Selection .........................................................................................................................................
46
46
MP3/WMA Playback ...................................................................................................................................
Program Play & Random Play.....................................................................................................................
47
49
Picture OD Playback .................................................................................................................................... 50
Using the Setup Menu ................................................................................................................................ 52
Setting Up the Language Features .............................................................................................................. 53
Setting Up the Audio Options ...................................................................................................................... 55
Setting Up the Display Options .................................................................................................................... 57
Setting Up the Parental Control .................................................................................................................. 59
Chapter
5;
VCR
Operations
Inserting and Ejecting a Video Cassette Tape ............................................................................................ 62
Playing a Pre-Recorded Video Cassette Tape ............................................................................................ 63
Special VOR Playback Features ................................................................................................................ 64
Using Automatic Tracking ............................................................................................................................ 65
Selecting the Cassette Type ........................................................................................................................ 66
Setting the Auto Play .................................................................................................................................. 67
Setting the Auto Repeat .............................................................................................................................. 68
Using the Tape Oounter .............................................................................................................................. 69
Using the Assemble Edit Function .............................................................................................................. 70
Selecting the Audio Output Mode ................................................................................................................ 71
Searching for a Specific Sequence ............................................................................................................ 72
Basic Recording .......................................................................................................................................... 74
Special Recording Features ........................................................................................................................ 75
Using One-Touch Recording ...................................................................................................................... 76
Selecting the Recording Speed .................................................................................................................. 77
Using a Timer Recording ............................................................................................................................ 78
Chapter
6:
Reference
Troubleshooting .......................................................................................................................................... 80
Technical Specifications .............................................................................................................................. 82
ENG-5
SETUP
General
DVD-VCR
Features
Features
,, Perfect compatibility to play back DVDs, audio
CDs or VHS Tapes.
,, Enjoy a DVD movie while recording a TV show
to the VCR.
,, Auto Setup instantly finds the time and runs
channel search.
,, RF inputs and outputs for all kinds of TVs
available.
,, Composite, S-Video, and Component Video
outputs.
,, On-Screen Program (English/French/Spanish).
DVD
Features
,, 10-bit video digital to analog converter and
54MHz advanced digital filter.
,, Playback of 96KRz/24-bit sources.
,, DTS digital output for DTS-enhanced DVDs.
VCR
Features
,, Hi-Fi Stereo VCR.
,, Superior slow motion and stop action (with 4
heads).
,, Playback of S-VHS tapes with a better than
standard resolution.
,, INTRO Scan, Zero Return, and END Search.
,, 7-event/l month timer recording.
,, Time remaining counter, real time counter.
Note
,, Discs which cannot be played with this player.
DVD-ROM/DVD-RAM/VCD
CDI/CDV
SuperAudio CD (CD HD layer)
CDGs play audio only, not graphics
DVD-RW (VR mode)
Non-finalizing DVD-RW, -R, DVD+RW and +R
disc
,, Ability to play back may depend on recording
conditions.
- DVD-RW, -R/CD-RW/DVD+RW +R/CD-ROM
Note
This product incorporates copyright protection
technology that is protected by US patents and
other intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovisien, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly
is prohibited
COPY
PROTECTION
Many DVD discs are encoded with copy protection
Because of this, you should only connect your DVDVOR directly to your TV, not to a VOR Connecting to
a VOR results in a distorted picture from copyprotected DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
PROGRESSIVE
OUTPUTS
SCAN
(525p)
'CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITI@_ TELEVBi@_ SETS ARE FULL"/
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PBTURE, IF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS OCCUR IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
STANDARD DEFINITION' OUTPUT IF THERE ARE
QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL 525p DVDVOR, PLEASE CONTACT SAMSUNG'S
CUSTOMER SERVICE CENTER
ENG-6
SETUP
Disc
Type
and
Characteristics
This DVD-VOR is capable of playing the following types of discs with the corresponding Iogos:
Disc Types (Logos)
Recording Types Disc Size
12 Om
Single-sided240rein. - DVD contains excellent sound
and video due to Dolby Digital
Double-sided480 rain.
and MPEG-2 system.
8Ore
Single-sided80 rain.
Double-sided160rain.
DVD
Audio
+
Video
V
I
D
E
0
AUDIO-CD
Max, Playing Time
12 Om
74 min
- OD is recorded as a Digital
Signal with better audio quality,
less distortion and less
80m
20 min
deterioration of audio quality
over time
Audio
DIGITAL
AUDIO
- Various screen and audio
functions can be easily selected
through the on-screen menu
= CD-R,CD-RW and DVD-RW, -R, DVD+RW, +R discs may not be playable in el! cases due to the disc
type or condition of the recording.
Disc
iVlarkinge
Region
Number
Both the DVD-VCR and the discs are
Hay Region Number
NTSO broadcast system in U.SA. Oanada, Korea.
Japan, etc.
Dolby Digital disc
coded by region. These regional codes
must match in order for the disc to play.
If the codes do not match, the disc will
not play.
The Region Number for this player is
described on the rear panel of the player
Stereo disc
Digital Audio disc
DTS disc
MP3 disc
You must only insert one DVD disc at a time. Inserting tWO
or more discs will not allow PiaYback and may cause
damage to the DVD.VCR.
ENG-7
I
SETUP
1
Description
Front
Panel
Controls
@
@
0
0
N
e
eee@@@
@
¢
¢@
1
DISC TRAY
Place the disc here.
9
2
3
OPEN/CLOSE
Press to open and close the disc tray
VOR Deck
10 REC (VCR)
Press to begin recording
11 EZ ViEW
4
Insert a standard VNS video tape.
EJECT
@
_
(Forward/Fast Forward)
Press to torward/fast forward a disc/videotape
The aspect ratio of a picture can easily be
adjusted to your TV's screen size
Press to eject a video tape if the tape is stopped.
POWER
Press to turn the DVD-VCR on and oft
12 Front Panel Display
Operation indicators are displayed here.
13 CHANNEL Vand A
6
_
(Reverse/Rewind)
Press to reverse/rewind a disc/video tape
7
m (STOP)
Press to stop a disc/video tape during playback
or record (VCR).
Press to change channels
14 DVC,,'VCR
Press to view DVD or VCR mode
5
8
_H (Play/Pause)
Press to play or pause the disc/video tape
Front
Panel
@
Connect to the Video/Audio output jack of your
external device
Display
O
O
l
@
15 P.SCAN
Press to select video out mode
16 UNE IN 2
O
1
DVD is activated.
2
Thetime counter position time remaining or
current deck status is indicated
3
VCR is activated.
4
DVD or CD media is loaded.
5
VHS videotape is loaded.
ENG-8
SETUP
Rear
Panel
@@@@@
i
o
I
o
AUDIO OUT
0
5
ConnecttotheAudioinput
jacksofyour
television.
RP mN(FROMANT.)
Connect the RF Antenna cable to your DVD-VOR
S-VIDEO OUT
COMPONENT VIDEO OUT
- Use these jacks if you have a TV with
Component Video in jacks
These jacks provide Pn P_and Y video
- If Component (Progressive Scan) Video Output
is selected in the AIt Video Out menu or by
using the RSCAN button on the front panel,
progressive scan mode will be enabled.
- If Component (Interlace Scan) Video Output is
selected in the AIt Video Out menu or by using
the RSOAN button on the front panel,
interlaced scan mode will be enabled
Use the S-Video cable to connect this jack to the
S-Video input jack on your television for higher
picture quality
DIGITAL AUDIO OUT (COAXIAL)
- Use a Coaxiat digital cable to connect to a
compatible Dolby Digital receiver.
- Use a coaxial digital cable to connect to an A/V
Amplifier that contains a Dolby Digital. MPEG2
or DTS decoder
8
RFOUT(TOTV)
ConnectyourDVD-VOR toa TV
LiNE iN t (VIDEOIAUDtO)
Connect to the Video/Audio output jack of your
external device.
4
LiNE OUT(VIDEO/AUDiO}
Use a Video/Audio cables to connect to the
Video/Audio input jacks on your television
Notes
Consult your TV User's Manual to find out if your TV supports Progressive Scan if Progressive Scan is
supported follow the TV Users Manual regarding Progressive Scan settings in the TV's menu system.
B if Component (Progressive Scan) Output is selected in AIt Video Out menu Video and S-Video will not work.
See pages 57 _ 58 to get more information on how to use the AIt Video Out menu
ENG-9
I
SETUP
Tour
1
2
3
4
5
6
of the
Remote
8
Control
POWER button
Press to turn the DVDVOR on and off.
NUMBER Buttons
OLEAR button
Use to remove menus or
status displays from the
screen
DVDbutton
Use to operate DVD
VORbutton
Use to operate VOR
,,q4/l_l_,_ (Search/Skip)
button
Press to reverse
search/skip a disc
Use to skip a title, chapter
or track on a disc.
7
1
[] (STOP) button
Press to stop a disc/video
tape during play or record
(VCR).
SUBTITLE button
Press to display the
subtitle language name
abbreviation on screen
MENU button
Brings up the DVD-VOR
players menu
10 ENTERiAT4_i
ChanneV
Trucking A or V
buttons
This button tunctions as a
toggle switch.
_@ ..... ©
_OWER
Om
_m
_
W_'VC_
=
-@
@
°@
_m
L_;
_
FADV
SKIP
°@
Om
@=
0
0
@
°@
.@
-@
@=
-@
@=
Press to change channels.
(TV)
REC
DISC+_Er_U
.¢
.¢
-¢
_/_,1
(Search/Skip)
button
Press to forward
search/skip a disc.
Use to skip a title, chapter
or track on a disc.
20
21
_UH(Hay/Pause) button
Press to play or pause the
discMdeo tape
INFO. button
Displays the current disc
mode. (DVD)
RETURN button
Returns to a previous
menu.
8AMSUN6
Press to adjust tape
tracking. (VCR)
11 REO button
Press to begin recording
(VCR)
12 PROGRESSWEiSPEED
button
Press to select progressive
scan mode. (DVD)
Press to select the tape
recording speed. (VCR)
13 MODE button
Use to select the program
or random play
REPEAT button
Allows you to repeat play a
titb chapter track or disc.
(DVD)
t8
19
9
@=
@=
@=
14 TViVCR button
Press to switch between
TV and VCR mode
15 SHUTTLE (@/_:_)
buttons
Use to play a sequence at
variable speeds (VOR)
16 AUDIO button
Use this button to access
various audio functions on
a disc. (DVD)
17 RADV/SKtPi_NPUT SEL
button
Press to advance play one
frame at a time. (DVD and
VCR)
Press to fast forward a
video tape. (VCR)
Press to select a external
signal source.
22
Y
DISC MENU button
Brings up the Disc menu.
(DVD)
23 MARK/SEARCH button
Press to memorize scenes
for replay. (DVD)
Displays the VOR Function
menu. (VCR)
24 ANGLE/TIMER button
Use
to access
various
camera angMs on a disc
(DVD)
Displays the Timer
Program menu.
ENG-t0
CONNECTIONS
Connecting
the
Antenna
Cable
There are several ways to connect your DVD-VOR. Select one of the following antenna connections that best
suits you below.
B Method 1: Antenna + DVD-VCR + TV: No Cable box
B Method 2: Antenna +Cable box + DVD-VCR + TV: Cable box with many scrambled channels
B Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels
- If you are using an off-air antenna that has 300-ohm twin flat leads, use an external
antenna connector (300-75 ohm adaptor: not supplied) to connect ihe antenna to the
DVD-VCR.
©
_,==_
_
- If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most electronics shops) to connect the antenna to the
DVD-VOR.
- The RF OUT(TO TV) jack of this product sends signals received through the antenna
and output Audio/Video signals.
Method1
: Antenna
+ DVDoVCR
+ TV:
No
Cable
box
selecting
the
channe,
o0
the
OVO VCR
Atso use this Method if YOUwatch channels
without cable box.
You Can record non-scrambled Channels by
RFIN
__
out RF
T(_RF CUT
T_
Antennacable
T'_Antepna Input
ENG-11
I
0ONNECTIONS
Method2:
eerantb|ed
Antenna
1
+ DVD=VCR
+ TV:
Cable
box
with
many
channels
You can record channels by selecting the channel
on the cable box. You cannot record one channel
while watching another channel. Be sure that the
cable box is turned on.
_
CaNe Box
To RF IN
To RF OUT
AMennacabb
ToAntenna Input
Method3:
scrambled
Antenna
+ DVD-VCR
+ TV:
Cable
box
with
a few
channels
Wall
YOU can record nomscrambbd channels by
selecting the channel on the cable box.
You cannot record scrambled channets that
To RF IN
OUTBF
Antenna
cable
ENG-12
OONNECTIONS
Before
Connecting
the
BVB-VCR
- Always turn off the DVD-VOR TV, and other components before you connect or disconnect any cables
- Refer to the users manual of the additional components (such as a TV) you are connecting for more
information on those particular components
Connection
to
a TV
The following shows examples of connections commonly used to connect the DVD-VOR with a TV and other
components.
Connection
to a TV (Video)
Ustnc video/audio caoles connec[ [he VIDEO
(ye_low)/AUDJO (red and white_ OUT terminals
on the rear ot the DVD-VCR to the VmDEO
(yeliow)/AUDlO (red and white) _Nterm rials of
your TV.
2
Turn on the DVD-VCR and TV.
3
Press the inpu[ selector on jour TV remote
controi un[ll 1hevideo signal from the DVD-VOR
appears on the TV screen.
Notes
- Noise may be generated if the audio cable is placed too close to the power cable.
- if you want to connect to an Amplifier, please refer to the Amplif{er connection page
(See pages 17 to 18)
- The number and position of terminals may vary depending on your TV set Please refer to the user's manual
of your TV
- if there is one audio input terminal on the TV, connect it to the AUDIO OUT Left (white) terminal of the DVDVCR
- If you press the PROGRESSIVE button when DVD-VCR is in stop mode or no disc is inserted the AIt Video
Out mode changes in the following sequence: (S-Video - interlace - Progressive)
- When the AIt Video Output in Display setup menu is set to Progressive, the S-Video Outputs does not work.
ENG-f3
I
CONNECTIONS
Connection
to
a TV
1
(S-Video)
Connecting to your TV usingan S-Video cable
You will enjoy high quality images S-Video separates the picture element into black and white(Y) and
color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
using an S-Video cable mo_ mc_uaeo_connec_
the S-VIDEO OUT terminal on the rear )t the
DVD-VCP co_neS-V_DEO iN termina st your TV
2
using the audio cables, connect the AUDIO fred
and whitef OUT termina s on the rear of the
DVD-VCR to the AUDIO [t'ed and white) IN
terminals o!, sur T\/
Turn on the DVD-VCR and TV
3
W_ththe unit _nstoF moae set the Aft video
ou[out to S-Video in the Display Setup menu (see
pages 57_58) or press the PROGRESSIVE
euI'_onon the remo_e control um I S-Video _s
oulpul
4
Press the input selector on ,,our TV remote
conzro_un_ the S-V_deo s_gnalfrom the DVDOR appears on _sur TV screen.
Notes
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
- The number and position of terminals may vary depending on the TV set
Please refer to the user's manual of your TV
ENG-14
OONNECTIONS
Connection
to
a TV
(Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), btue(P_) red(P_) signals to present clear and clean images (Audio signals
are delivered through the audio output.)
1
Using componen[ vleeo cables no[ Incluoeo
connect the COMPONENT VIDEO OUT termlnaI
on the rear ot the DVD-VCR to tt'÷ COMPONENT
mNterminal ot your TV
/\
2
Uslng the audio cab es connect the AUOIO _red
and white) OUT terminals on the rear of the
DVD-VOR to the AUDIO trod and white) iN
terrrllnals of our TV.
Turn o_ the DVD-VCR and TV.
3
With the unit _nstop mode setthe AIt woeo
ou[put to Component: Interlace in the DispBay
Setup menu (see pages 57,_58)or press -_ne
PROGRESSIVE button on the _emu_econtrol
Jnttl I_terlace is cutout.
4
Press the _npu_selec[or o _ your TV remote
con_ro_un_ _neComponen_ signal from the DVDVOR appears on the TV screen.
Notee
= if Video output is incorrect{y set to S=Video with the Component cables connected, the screen will
turn red.
- If you want to connect to an Amplifier, phase refer to the Amplifier connection page (See pages 17 to 18)
- The component terminal of your TV may be marked "R-Y. B-Y.Y" or "Cr, Cb, Y" instead of "PR. PB, Y"
depending on the manufacturer The number and position of terminals may vary depending on the TV set
Please refer to the useCsmanual of your TV
ENG-15
I
OONNECTIONS
Connection
to
a TV
1
(Progressive)
using componen_ v_aeocao_es-not _ncluded
connect: [he CO_,_PONENTVIDEO OUT terminal
on the rear ot the DVD-VOR to the COMPONENT
iN [ermlnal of your TV.
2
using the audio cables, connect the AUDIO (red
and white OUT terminals on the rear ot the
@i ":j
DVD-VOR to the AUDIO lred and white] IN
terminals of your TV
Turn on the DVD-VOR an _Tv
Vht_
2,
3
COd Jorlen[ Cabl_
_}[
rio LI_OC
t_qththe Jnli _nsio_ mooe set the Att video
output to Component: Proc "esswe _nthe Display
Setue menu (see pages 57_58) or press me
PROGRESSIVE EJt_onon tne remo_econtro_
Progreslve Scan mooe promp_ screen appears
Then cress ENTER and prog_esswe wH_oe
output
4
Press the Inpu[ seiec-ioron 'our TV remote
conzro_utah the Component signal from the
DVD-VCR appears on the TV screen.
To see the progressivevideo output,
, Consult yourTV User'sManualto find out if yourTV supportsProgressiveScan.
If ProgressiveScan is supported,follow the TV UseCsManualregardingprogressive Scan
setUngs!n the TV's menusystem.
Dependingon yourTV,the connectionmethodmay differ from the illustration above,
Note
What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method
Progressive scanning method provides better and clearer picture quality.
ENG-16
OONNECT]ONS
Connection
Connection
to
to
an
Audio
an
Audio
System
System
(2
Channel
Amplifier)
Using the audio cables connect -me_'LINE}
AUDIO {led and white] OUT terminals on the
"ear of the DVD-VOR to the AUDIO (red and
white) RNterminals of the Amplifier.
2
Using me video s_gna_cadgers connec_me
VIDEO S-V_DEOor COMPONENT OUT
terminals on the rear at the DVD-VCR to the
VIDEO. S=VIDEOor COMPONENT OUT
@
termma of your TV as descr_oea on pages 13 to
16.
White
3
Red
White
Turn on the DVD-VOR. TV. and Area _her
2-channel
Stereo Amp
4
Press the input select button of the Amptif_erto
setect external input _nDrearto hear sound iron_
the DVD- 'OR.
Refer tc your Ampl_fier's Jser manual to set the
Amy_er's audio inp JL
Notes
= Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
Please set the audio in the menu screen according to the Amplifier. (See pages 55 to 56)
The position of terminals may vary depending on the Amplifier
Please refer to your Amplifier's user manual.
ENG-17
I
OONNECTIONS
Connection
to
an Audio
1
System
(Doiby
digital,
iVIPEG2
or DTS
Amplifier)
using a coaxlaI cable nottnciudeo connect me
D_GITAL AUDIO OUT (COAXIAL) terminal on
ins _ea_of the DVD-VCR to the DIGITAL AUDIO
iN (COAXIAL) terminal ot the Ampllf_er
2
Using the wdeo signaI cable(s), connect -me
S=WDEO or COMPONENT OUT terminals on the
rear of the DVD-VCR to _ne S=VIDEOor
COMPONENT OUT terminal of 3ur TV as
'® nL®®/ "1
described on pages 14 to 16.
Coaxia Cable
(not nc uded)
3
Turn on the DVD- ,/CR TV. and Amblifier
4
Doby digital o_
DTS Arrp
Press me input select button of the Amod_ertc
semc[ ex[erns., mpu_m order [o near sol nd from
the DVD-VCR.
Refer to your Amplifier's user manua_ to set ire
AF g lfler's audio input.
Notes
When you CoRRect the DVD_VCRto DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will Rot be heard, or there wH{ be a loud sound.
Please turn the volume down when you turn on the Amplifier_ Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier (See pages 55 to 56)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier
ENG-18
CONNECTIONS
Connecting
a Power
Cord
& Auto
Setup
¥OL" DVD-VCR's vower corn snouJaue p_uggea
n_oa sianaard 120V/60Hz wail outlet, i_vo_a
pressing any uu_ons on _ne remc_ecomro_or on
the unit during Auto Setup. While -our DVD-VCR
s running Auto Setup "Auto" will blink. Wqen
Auto Setue Is complete tne current _lme will be
e_sp_ayedon the front panel. If Auto Setu_ fa_Isto
Ioca_e a cnannet to set tr_eCLOCK_ou ShOUld se{
the CLOCK
manually. (See page 22 to 23.)
You must
connected
2
have the anttenna
to set the Auto Clock
You must have the anttenna connected to set
Turn sn -{hepower uy pressing the POWER
uu_on on _neremo_econ_ro_or on the front DaneI.
3
Turn on your TV by pressing the POWER button
o _the TV remote control.
ENG-19
the Auto Clock (See pages II,q 2).
INITIAL
Selecting
SETUP
a Menu
Language
To change the on-screen MENU language to English French or Spanish follow these steps.
1
Press the MENU button
2
Press the _./_' buttons to
select Setup, then press the _or ENTER button.
3
Press the AiT bu[[ons [o
se_ec_Language, _nenpress
"[bem.or ENTER out,on.
4
Press the A.i_' buttons co
selec_ -_neaearoenaTe
language. :ngllsn, Frangals
or Espahot.
Press the ENTER button
5
Press the MENU ou_tonto exit
J
ENG-20
INITIAL
Setting
the
SETUP
Clock
This menu is used to set the current time. "Youneed to set the time to use timer recording.
Setting
the
Clock
Automatically
Press the MENU L Jt_on.
2
Press the _,IT buttons to
select Setup, men pres_ the _,,
or ENTER 9u[Ton.
3
Press the j,/V" ou[[ons Io
select C!ock. then press the
or ENTER button.
Notes
You must have the antenna connected to set
the Auto Clock (See pages 11-12)
The Clock will be automatically set when you
turn off the DVDWCR
4
Press the _,/T buttons to
select Auto C!ock. men press
:he _ or ENTER button
5
Select a channel that carries a
time signal oy using [ne _ or
ENTER button
(Auto, 1,2 ...... 125
ENG-21
INITIAL
SETUP
1
6
Press the A/'_ buttons to
select Time Zone. men press
tile _ c ENTER button.
Select the time zone of your area
#y using the ,a,/T._/_ buttons
men _ress the ENTER Du_on
Selec Automatic to setthe t_rne
zone aul )maiioal_.
7
Dress the AiT buttons to
select Daylight Saving, then
press the _ or ENTER button
_oselect Yes. No or Auto.
8
Press the MENU eu_tonto exit
Note
tf your clock is set to the wrong Time Zone or
Daylight Saving you can adjust these
settings without turning off the Auto Clock
Set function
Setting
the
Clock
Manually
If Auto Setup falls to set the DVD-VOR s internal clock:by locating a local TV station, follow these steps to set
the data and time manually
Note: For accurate Timer Recording, your DVD-VCR's internal clock must be set correctly.
ENG-22
INITIAL
SETUP
2
Press the A/_ buttons to
select Setup, 1nunpress the
or ENTER button.
3
Press the ,_,/T buttons to
select 0!ock. _nen Dress the _,or ENTER button.
4
Press the ,&/_' buttons co
select Manua_ Clock. then
_ress the t_ or ENTER butlon
5
use the 4/_ eUtlOnSt0 sele ;t
_acn of the following options,
then use the ,_1'_ buttons to
sel each option
Press the ENTER uuIton Io set
d_eClock
Press the MENU outton [o exit
,_"_
"
ENG-23
I
INITIAL
Memorizing
Selecting
the
SETUP
the
Video
1
Channels
Signal=eource
This feature allows you to manually set the DVD-VOR s tuner band to Antenna or Oable whichever you
connected to the Antenna In jack during initial setup
Use this setting only it Auto Setup detected the incorrect tuner band i.e channels are coming in on the wrong
channel numbers.
1
Press the MENU Du_on.
2
Press the _,/_' buttons to
select Setup, men press me
or ENTER button.
3
°tess the AIT buttons to
select Channel men press me
or ENTER button.
*,_ - Antenna: Select this it the DVD-VOR
is connected to an indoor or outdoor
VHF/UHF antenna.
4
Press the _ or ENTER button
Io select Antenna or Cable
TV.
- Oable TV: Select this it the DVD-VCR
is connected to Oable TV.
ENG-24
INITIAL
Storing
Channels
SETUP
in Memory
(Automatic
Method)
AutoChannelMemorywill automaticallyseekandstoreall activechannelsin yourarea
Press the _./_' buttons to
select Auto Channel Memory,
then press the _. or ENTER
The DVD-VOR wit[
automatically search for all
available channels in the
selected tuner band.
This procedure may take a few
Note
minutes tOcomp!ete.
Do not turn the power off when Auto
Channel Memory function is proceeding
If the power is off, Auto Channel Memory
should be reset.
When finished, the lowest
channel t
displayed,
Adding
and
Erasing
Channels
(Manual
Method)
Use this feature if Auto Channel Search missed a channel that, ou would like to add. delete a channel you wish
[o _ernove
6
Press the ,_,/_' bL][ons to
select Channel Add/Delete
inert p_ess the _ or ENTER
Dunce.
7
Press theOH A/V buttons to
tune in thoo,,
channel number
,ou wine to add or delete.
Jse thenumber BUttOntO
select tee ceannel directly.
8
Press the ,_ or _* but[on "[o
de_etethe channel from your
2cannel tlst or to add.
Repeat steps 7 to aae or
to delete additional channem.
Note
Use the number button to move the channel
directly
Press the MENU button to exit
ENG-25
I
Selecting
INITIAL
SETUP
the
RF
1
Output
Channel
Use this teature if DVD-VCR is connected to TV using RF antenna cable.
1
Press the MENU bu'cton.
2
Press the ilT buttons Io
select Setup, then press the _or ENTER but[on.
3
Press the AiT buttons 1o
se ect Channel _nenpress me
or ENTER DU_[On.
4
Press the ,&!_f buttons to
select RF Output ON. then
press the _ or ENTER button
io selec_ 3CR or 4OH.
5
Press the MENU _unon to exit:
ENG-26
INITIAL
Selecting
the
SETUP
Front
Panel
Display
You can set the Front Panel Display to be bright all the time, dim all the time, or to automatically dim during
power off.
1
Pr¢ss me MENU button.
2
Dress the AIT buttons _o
select Setup, men press me
or ENTER button.
3
Press the i!T
buttons _o
seie ;t Front Display, then
press the _ or ENTER L JI_on
to select Auto, Bright or D_m.
4
Press me MENU button to exl[
,, Auto:
Front Panel Display will dim automatically
during power off
,, Bright: Front Panel Display will be bright all the time
,, Dim:
Front Panel Display will be dim all the time.
ENG-27
I
INITIAL
Setting
the
SETUP
Power
1
Off
Automatically
This feature automatically turns off your DVD-VOR if no signal is received and you do not press any buttons for
the selected time.
1
Press the MENU button.
2
nress
the
A/V
b Jttons
to
select Setup, then press the
or ENTER eutton.
3
Press the Ai_ buttons to
select Auto Power Off 1net
ress _ne_ or ENTER button
to select Off. 1Hr or 2Hr.
4
Press _ne MENU button to exit.
,, Off: Auto power off is disabled.
,, 1Hr: DVD-VOR will auto shut off 1 hour after the last button
is pressed or no signal is received
,, 2Hr: DVD-VOR will auto shut oft 2 hours after the last button
is pressed or no signal is received
ENG-28
DVD OPERATIONS
Playing
Before
a Disc
Play
- Turn on your TV and set it to the correct Video Input on your TV's remote control
- If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input
Playback
Press the
OPEN/CLOSE
bUI'_on
on the
fronI panel &
_
'_
2
Place a disc gen_lyInIo [Retra_
w_ 1hed_SC'S
label tac_ngup
3
Press tee Hi (Play!Pause)
bUr_Onor jour remo_econtrol
or on Ine Tron_eanel.
'vlost discs w_listart to p_ay
PaCKas soon as lee Ira
closes.
.._ Stop/Resume
- Press the [] (Stop) button once to
stop playback To resume the
DVD/OD from the point where the
disc stopped, press the _.||
(Play/Pause) button.
- Press the [] (Stop) button twice to
completely stop playback The next
time you press the _H (Play/Pause),
the disc will start over from the
Stopping Play
Press the M Stop_ eu_on
_
aurlng play
___, .....
beginning.
ENG-29
DVD
1
OPERATIONS
5
-J
Removing Disc
_,
Press the OPEN/CLOSE
Du_on o 1the front cane
A)
"__
_:
..........
_,.[
--
\
{
- Screen stops, no sound
- To resume pressthe Hi
(Play/Pause) button once again
6
Pausing Play
Press the _l
DU[IOn
On jour
Ptay/Pause)
remo[e
Note
con[rot
If the player is left for about 5 minutes in
pause mode it will stop.
o_ on the front panel during
p_a}
Each time the button is pressed a
new frame will appear.
No sound is heard during STEP
mode
7
Step _lotion Ptay (Except CD)
Pre__the F.ADV button on
the remote control during play.
8
Slow _,_otion Play (Except CD)
Press and hole me _-
Forward}
button to ChOOSeme play speea
between 1/8 1/4 and !/2 at
norma, aur,ng PAUSE or STEP
Press the _H (Play/Pause) button to
resume normal play
You can only pertorm step motion
play in the forward direction
........
_ _,:._ _.:_"
-._ - No sound is heard during slow mode
- Press the _H (Play/Pause) button to
resume normal play
Reverse stow motion play will not
_¢"s_F'_:F7
"S_'(S_'_<
moae.
wor_.
Note
This ((_)) icon indicates an invalid button
press.
ENG-30
DVD OPERATIONS
Using
the
Search
and
Skip
Functions
During play you can search quickly through a chapter or track, and use the skip function to jump to the next
selection
Searching
through
a Chapter
During
;_ayl
press
and
h0_d
th_
-_/_,_(Search)
buttonson
the remote contro ! t0r more
_'_
I
or
Track
-,_ It you want to search at a faster speed
on the DVD or OD, press and hold the
button.
_'_i_
r,::_J'_-F,_;_[(
f
I
.
IDVDI2x8x32x128X
12x 4X 8X
Notes
- The speed marked in this function may be
different from the actual playback speed
- No sound is hearing during search mode
(Except CD).
Skipping
Tracks
- When playing a DVD if you press the _,_ (Skip) button,
it moves to the next chapter. If you press the _
(Skip)
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the
previous chapter
ENG-3t
I
DVD
Using
When
the
Playing
1
OPERATIONS
Display
Function
a OVD/CD
"Youcan select information in the
DVD Function menu by pressing the
MENU button
1
During play, press _ne mNFO.
eut_0n
on _ee rem0ie
c0n[roL
2
DVD
Press the ,al_' buttons TO
elect the desired item.
CD
You may use the number buttons of the
remote control to directly access a title
chapter or to start the playback from a
desired time
3
Press the _, _ bu[tons to make
tee aesirea se_uaand teen
e_ess ErieENTER button.
ENG-32
DVD OPERATIONS
Note
To access the desired title when there is more than one in the disc.
For example, if there is more than one movie on a DVD each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to
tracks on an audio CD)
Allows playback of the film from a desired time You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language. In the example, the soundtrack is played in English 51CH
A DVD disc can have up to eight different soundtracks
Refers to the subtitle {anguages available in the disc.
You will be able to choose the subtitle languages or if you prefer turn them off from the screen
A DVD disc can have up to 32 different subtitles
ENG-33
I
DVD
Using
the
1
OPERATIONS
Disc
and
Title
Menu
(DVD)
-,_ MENU button can be used to access
1
Disc and title menus on a DVD during
playback
Dur ng playback of a DVD disc,
Eress the MENU button on the
remo_econtrol
2
Press the AtT buttons _o
se_ec_Function _nens_ess
the _ or ENTER button.
Press the _/tr buttons to
select DVD Function, then
press the _ or ENTER bu!ton.
Notes
- Depending on the disc, the Disc Menu or
Title Menu may not work
Press the &!T buttons to
select Title [_lenu or Disc
- You can also use the Disc Menu by using
the DISC MENU button on the remote
control
- Title Menu will only be displayed if there
are at least two titles in the disc.
Menu then press the _ or
ENTER button.
ENG-34
DVD OPERATIONS
Using
the
Function
Menu
(DVD)
_,q MENU button can be used to access
DVD functions such as Information,
Zoom, Bookmark Repeat and EZ view
menu during DVD playback
1
Dunng me playback of a DVD
alsc press the MENU buc_on
on me remo_e comroL
2
Press the A/_" buttons _o
select Function. then press
me _ or ENTER button.
3
Pres_ the _iT buttons to
select DVD Function men
press the _- or ENTER uunon.
- Informat_or
(See pages 32 to 33
- Zoom _Seepage 45)
- Bookmant
See pages 43 to 44
- Repeat (See pages 36 to 37,
- EZ vie Iv
See pages 39 to 40
_,_ You can also directly select these
functions using their respective buttons
on the remote control
into
MARK
REPEAT
4
Pres_ me A!T' buttons to
select J_e of the fwe _unction_
Then p_essthe _, or ENTER
button to access the function.
ENG-35
I
DVD
Repeat
1
OPERATIONS
Play
Repeat the current track chapter title, a chosen section (A-B), or all of the disc.
When
playing
& DVD!CD
1
During play, press the REPEAT
uui_on on _neremo[e coneoL
ReeeaTscreen appea_s
2
Press the _/_ buttons to
select Chapter. Title or A-B
men press the ENTER
eu(_on
_,q DVD repeats play by chapter or title,
and CD repeats play by track or disc.
- Ohapter: repeats the chapter that is
playing.
- Title: repeats the title that is playing
- Track: repeats the track that is
playing.
- Disc: repeats the disc that is playing
- A-B: repeats a segment of the disc
that you select.
DVD
_
.........
OD
press ENTER button.
Note
Depending on a disc, the Repeat tunction
may not work
tt's available
OLEAR button
ENG-36
DVD OPERATIONS
Using
the
AoB Repeat
function
1
j
During ptay, Dress [he REPEAT
uu_tol on me remote centre
Repeat screen appears.
/"
_-_(_
,
_,_._,
SA
2
DVD
Press the ,_/_ Dut[ons to
seaectA-.
CD
3
DVD
Mark the Starting Point
Press the ENTER Dut_ona_
me eeglnnlng of the segmen[
,ou want to repeat (Point A).
Once you se_ec[pom[ A. 8
w_l Dese_ec[ea.
,_
CD
_
_
Note
The minimum A -B Repeat time is 5
seconds.
4
Mark the Ending Point
Dress the ENTER putter
again a__neend of the
segmemyou wamlo repeal
/Point Bt
DVD
CD
The segmem wm eeg_n
repeating in a con[tnuous
_oop.
5
DVD
Cancel A-B Repeat
Press the REPEAT butter
teen ]_ess the ,q/_ buttons
to select Off and press
ENTER bu_on
CD
ENG-37
I
Slow
DVD
OPERATIONS
Repeat
Play
1
This feature allows you to slowly to repeat scenes containing sports dancing, musical instruments being
played etc. so you can study them more closely
When
playing
a DVD
I
During pJay,press me
_H Play/Pause_ nutton
2
/
Press and no_otne
{Forward) nut[on to choose me
play speed between 1/8 !/4
and 1/2 of normaI during
PAUSE or STEP moae
3
Press the REPEAT uu_tonon
me remote conlroL
°ross trle 4/_ bu_ons to
select A-.
,Q
_.q To set A-B repeat, set (A) first,
then set (B) after the following stow play
time has elapsed:
1/8x: wait 40 seconds then press B
1/4x: wait 20 seconds then press B
1/2x: wait 10 seconds then press B
4
Press the ENTER button at
me petal wnere you want
repeat pIay to start (A).
B is automatically se_ecleo.
Press the ENTER button at
_,q The disc will ptay from Ato B repeatedly
at the speed you chose.
me point wnere _ou warn
me repeat play to stop (S).
To return _o norma_p_ay
press me REPEAT buttor
me_ [ tess the
- JmeeravaliabIe.
ane tne number ol
angIes
Note
2
_
If the disc has only one angle this feature
won't work. Currently, very few discs have
this feature
4_
Press the _/_ DUIIOn
repea_eo_yto seiec-(ine
aes_red angIe. To remove the
ANGLE _con 9ressme
CLEAR or RETURN button.
Using
the
Bookmark
Function
This feature lets you bookmark sections of a DVD so you can quickly find them at a later time
Note
Depending on a disc the Bookmark function
may not work.
When,
you want %omark, press the
ENTER button. Up to three
scenes m.ay be marked at a
time.
ENG-43
I
DVD
Recalling
1
OPERATIONS
a Marked
Scene
During Play, press the MARK
2
Press the _/_
Cmearing
buttons to
a Bookmark
1
During play, press the MARK
Button on the remo_e con_o_.
2
Pres; the ,_1_ buttons to
select Ine becKman
number cOBwan[ to aele_e.
3
Press the CLEAR Du_on_o
oelete a BOOKmarKnurllDeL
ENG-44
DVD OPERATIONS
Using
the
Zoom
(DVD)
Function
1
Dunng 1heplayoacK of a DV_
disc press the MENU bunch
on me remo_e comrol.
2
Z
Press the _,/_ buttons co
select Functbn [hen press
the _, or ENTER button.
3
Press the A!_f buttons to
se_ec_DVD Function men
press the _- or ENTER bunch
4
Press the A/T bJ[_ons_o
select Zoom. _nen D_essme
or ENTER burton.
-,_
5
Press the _klT or _/_
eunons _ose_ec_-me pan of
me screen you wan1_o
zoom
%
n on.
Press the ENTER button.
During DVD play press ENTER to
zoom in 2X/4X/2X/Normal in order.
j
Note
Depending on a disc, the Zoom function may
not work
/
ENG-45
I
DVD
Clips
1
OPERATIONS
Menu
for
MP3/WMNJPEG
Discs with MP3/WMA/JPEG contain individualsongs and/or pictures that can be organized into folders as
shown below. They are similar to how you use your computer to put files into different folders
1
Open me a_scIra!
2
Place tt e olsc on Theiraj.
f
3
Close the tra
The tra; closes aria this
screen alsplays.
- _
ParentFoid_ ,
Current Folder and
Pee_Folders
Foldersand Files
in CurrentFolder
Name of currently playing file.
- _
: Ourrent Playback Time.
-
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files in the disc will be played
in random order.
Folder
Selection
The folder can only be selected in the Stop mode
o To select the Parent Folder
Press the RETURN button to go the to parent
folder, or press the _/'_ buttons to select ' and
press the ENTER button to go to the parent folder
- To select the Peer Folder
Press the ,,_/l_buttons to highlight the left window.
Press the A/T buttons to select the desired folder,
then the ENTER button
- To select the Sub-Folder
Press the 4/_ buttons to highlight the right window.
Press the _/_f buttons to select the desired folder.
then press the ENTER button
ENG-46
_:
MP3 file icon.
_:
WMA file icon.
_:
JPEG file icon.
_
: Folder icon.
..,_
: Current Folder icon.
@
: Disc mode
DVD OPERATIONS
MP3/WMA
Playback
1
Open the disc tra_
2
Place the disc on me 1ray.
3
Close me _ra!
When a disc or a folder contains beth
4
MP3 and WMA files, only one type will
be played, not both
Press the AI_ or _/_
ounons to se_ec_a song file
r:'ress the ENTER Du_on to
negtn p_aybackof the song
file.
Repeat/Random
playback
During paly_press the
REPEAT button to change
the playback mode. There
II
off T_aok
Folde_and
Jl
are!oar
modes
Random.
_',t.._-'_f _J_
,,_, _w;_j
[ I ,_ _,/
II
II
.f
|
_
S_MS
- Off: Normal Playback
Track: Repeats the current song tile.
Folder: Repeats the song files which have the
Same extension in the current folder.
Random: Song '_ileswhich have the same
extension will be played in random erda(.
To resume normal play press the CLEAR buttoh.
ENG-47
t\,
I
DVD
CD=R
MP3!VVMA
1
OPERATIONS
file
When you record MP3 or WMA files on CD-R.
please refer to the following.
- Use a decompression transfer rate of at least
64Kbps when recording WMA flies.
- Your MP3 or WMA files should be ISO 9660 or
JOLIET format.
Sound qualr_ywith WMA files basically depenes
on the rate of compressien/aecompression you
ChOOSe.
SO 9660 forma_ ant] Joliet MP3 or WMA files _e
compatible with Microsoft's DOS and Windows.
aria wt[h Apple's Mac. Th_sTorma__sme mos_
wl(]e_ JSea.
Getting CD audio sound °eauires an
ant]_og/algl_a]sampling ra_e.that is con_ erslon _o
WMA format of at least 64Kb_s ant] up to
192Kbps
- When naming your NIP3or WMA files, do not
exceed 8 characters, and enter ".rap3..wma"
as the file extension.
Conversely, files wl[n decompression rates below
64KbrJsor over 192Kbps will not be pIayee
propen_
General name format : Title.m _3. or Titte.wma.
When composing your role _naKesure mat !ou
use 8 cnaracl.ers or tess nave no seaces in me
name ant] avola the use of _peclt]l c(]arac[ers
rlclu(]lng.
- Do not try recording copyright protected MP3
files.
Certain "secured" files are encryptet] anu co(]e
projecter] _o prevem H_egalcopying These flies
are of the following _ypes:Windows MediaTM
treglstered trade mark of Microsoft tnc an(]
SDM_TM registered trade mark of The SDM
-oundt]t]om. Youcanno_ copy sucn flies
(.I , \,=_ +
- Use a decompression transfer rate at at least
128 Kbps when recording MP3 files.
Sound quail1!!with MP3files oas]caHyt]epenas
on -merate of compresslon/t]ecompresston yo_
ChOOSe.Gettm9 CD audio sound requires an
analog/digital sampling ra_e.mt][ _sconversion _o
MP3 format of at least 128 Kbos aria up to 160
Kbos. However. choosing nigher rt]_es t_ke192
- important:
Kbos or more. only rarely g_re eerier sauna
quality. Con e_se_ytiles wire decomp_ess_or
ra_esbelow 128 Kbc _ will no_ne player] property,
The aoove recomment]a_ons canno_De taken as
t] guarantee mar me DVD-VCR wll p_ayMP3
recoreings or as an sssursnce of sound quality.
YOUshoals nora n'_aIceRaln -lecnnoiog_esaria
methods for MP3 f_le recoramg on CD-Rs
prevem optimal playback of these files on ,ou_
DVD- CR '.degrader] SOUndqua_l[ytin(] m some
case_ nab_lityof the ptayer to read the f_tes
This unit cai pla} a maximum of 3000 files and
300 folders per a_sc
ENG-48
DVD OPERATIONS
Program
Play
& Random
Play
You can listen to songs randomly or in the desired sequence.
Up to 20 tracks can be programmed
This function is available only with Audio CDs.
Program
Play
Note
Random Play
o With the unit in stop mode, press the
REPEAT button.
- The play mode menu will appear
1
With the unit in stop mode,
press the REPEAT button.
- The play mode menu w_H
appear.
o Press the ',_ or _ buttons to select
Random, then press the ENTER button.
-The disc will be played in random order
2
Press the 4 or _ buttons m
select PROGRAM. thor
dress the ENTER button.
The program play screen
wmappear
3
Press the A T or 4/_,
buttons to semc[ me desired
tracK men press the ENTER
DUI[On.
- The semcted track wil De
aaaec to the Program order.
- _fyou aetete tne track
press the CLEAR but1m
The track added tast will be
Note
deleted from the Program
order.
If the disc tray is opened during
programming program play will be canceled.
• To Cancel Programming
- Press the REPEAT button.
The program will not be saved and the
program screen will disappear
4
To finish programming and
smr_ p_ayoacK,press me _-ll
DUIIOR.
, To Cance_ Program Play
The disc wilI be played In
_Jroc"ammea order.
- During playback or in Stop mode, press
the CLEAR button
ENG-49
I
DVD
Picture
CD
1
OPERATIONS
Playback
Select the desired bider
[hen press me ENTER
DU[[OF
2
Press me ,&/_ bu_[[onsTo
select a Picture tile m me
ClIDS menu. then oress me
ENTER button.
Notes
- If no buttons on the remote control are
pressed for 10 seconds the menu will
disappear.
- Press the [] (Step) button to return to the
clips menu
- When playing a Kodak Picture CD, the
unit displays the Photo directly, not the
clips menu
3
Press the INEO. button to
dtselaj -[ne menu.
Press the _/_ L J{ions To
selec[ me men_ you want to
wew. men press the ENTER
ou[[on
Abum Screen
Slide Show
- To see the next six pictures, press the _4(Skip)
button.
- To see the previous six pictures, press the 144
(Skip) button.
Rotation
- _
LL_:
- Betore beginning the Slide Show. the picture
interval must be set.
Each time the ENTER button is pressed,
the picture rotates 90 degrees clockwise
-
: The unit enters slide show mode
@
: When this icon is selected and ENTER is
pressed the pictures change automatically
with about a 6 second interval
Zoom
(_:
Press the A/T or _/_ buttons to select the
part ot the screen you want to zoom in on.
Press the ENTER button. Each time the
: The pictures change automatically with
about a 12 second interval,
ENTER button is pressed the picture is
enlarged up to 4X. (2X , 4X , 2X _ Normal)
:
The
pictures change automatically
about a 18 second interval.
with
Notes
-
ENG-50
Depending on a file size, the amount ol time belween each
picture may be different from the set interval time
II you dont press any button, the slide show will start
automatically in about 10 seconds by default
DVD OPERATIONS
CD-R
JPEG
Disc8
Onl_ files with the ".]pg" and ".JPG" extensions can De piayea
- If the disc is not closed it w_lltake longer to s[an playing and not all of the recorded f_lesmay be e eyed.
- On
CD-R discs with JPEG t _es 1 ISO 9660 or Joliet format can be played.
- The name of the JPEG tile may not De _ongerman 8 characters and should contain no islet Kspaces or
special cnaracters
- ÷
- On aconsecutlvel wnttenmum-sesstonalsccanoeplayed.
If there ts a elanK segment ln me mumsession a_sc me d_sccan De stayed only up to me Plank segment
- A maximum of 3OOOimages can De storec on a slngIe CD
- Kodak Picture COs are recommenoeo
- when playing a Kodak Picture CD, only the JPEG flies in the pictures folder can be played
- Kodak P_ctureCO: The JPEG flies in me o_cturesfolder can be played automa[icalb
- KonJcaPicture CD: It jou want to see me Picture. sebct the JPEG f_lesin the c rapsmenu.
- FU;, Rcture CO: It you want to see the Picture select me JPEG t es m me tiles menu.
- QSS Picture CD: The unit may not play QSS Picture CD
!f the - smber of tiles in 1 Disc is over 3000. cab the first 3000 JPEG flies can De playee
f the number of folders m I Disc is over 300 )n_yJPEG fibs in the first 300 biders can De p_ayea
ENG-51
I
DVD
Using
the
1
OPERATIONS
Setup
Menu
The Setup menu lets you customize your DVD-VOR by allowing you to select various language preferences,
set up a parental level, even adjust the player to the type of television screen you have
1
w_th the unit in stop meae.
press the MENU button on the
remo[e
control
2
Press the a,/_ _utrons to
select DVD. then press the
or ENTER button
@ Language: Setup of the Language
OAudio: Setup of the Audio Options
O Display: Setup of the Display Options Used to select which type of screen you want to watch and several
display options
O Parental: Setup of the Parental Level. Allows users to set the level necessary to prevent children from
viewing unsuitable movies such as those with violence adult subject matter, etc
Note
Depending on the disc, some DVD Setup
menu selections may not work
ENG-52
DVD OPERATIONS
Setting
Up
the
Language
Features
If you set the there is no player menu on the osd disc menu, audio and subtitle language in advance, they will
come up automatically every time you watch a movie.
1
With the unit m Stop moae
press 1heMENU button on the
remole 3on1iot.
2
Press the A/T buttons to
select DVD. tnen press the
or ENTER Duiton.
3
Press the _,/_' buttons to
select Language, _nenpress
_ne _ or ENTER bL[ton.
4
Dress the A!T buttons to
select the des_reo _tem -_ner
press {he _ o_ENTER
buIIon.
_,_ - The language is selected and the
screen returns to Language Setup
menu.
5
Press the A!T' buttons to
select the desJrea tanguage
trier oress the _ or ENTER
To make the DVD Setup menu
disappear, press the MENU button
DUIIOn.
ENG-53
I
DVD
Language
1
OPERATIONS
Function
_,_ - Select "Others" it the language you
want is not listed
To set the Disc Menu
Language to your preferred
language, follow these steps.
!t your preferred language iS
available on a DVD, your
Disc Menu Language will
automatically be set to the
Aud!0
- If the selected language is not
recorded on the disc, the original prerecorded language is selected
!
i
- Select "Original" if you want the
default soundtracK language to be
the original language the disc is
recorded in.
i
To set the Audio Language Io
your preferred language,
toiiow these steps. If your
preferred languag_
available on a DVD, your
Audio Language
- Select 'Others' if the language you
want is not listed
- If the selected language is not
recorded on the disc the original prerecorded language is selected
language you choose.
_,__
To set the Subtitle Language
to your preferred language,
foIIow these steps. If Y0Ur
preferred language is
available on a DVD, your
Subtitle Language will
automatically be set to the
language you choose.
Select "Automatic" if you want the
subtitle language to be the same as
the language selected as the audio
language.
Select 'Others' if the language you
want is not listed Some discs may
not contain the language you select
as your initial language; in that case
the disc will use its original
language setting
ENG-54
DVD OPERATIONS
Setting
Up
the
Audio
Options
Audio Options allows you to set up sound for use with your external audio system.
1
With the DVD in Sto_:mode.
press the MENU button on -{he
remo_e :ontrot.
2
Press the A/V bJ[rods Io
select DVD. then press the
or ENTER button.
3
Press the A!T buttons _o
_ele _'tAudio. then Dress the
or ENTER button.
- To make the DVD Setup menu
disappear, press the MENU button
4
Press the _1'_ buttons to
selec[ ine oeslred item. trier
sress the _ or ENTER
button.
ENG-55
I
DVD
Audio
1
OPERATIONS
Options
Digital Output
Manufacturedunder license from Dolby
Laboratories."Dotby" and the double-D
symbol are trademarks of Dolby
Laboratories.
- POM: Converts to
PCM 2CH_ audio.
- Bitstream: Outputs DoJey
DigiTalwa me digital
)ut F Jt. Select Bltstrearr
t_,nenconnec_ing_o a
Dolby B gita Decoder.
"DTS" and "DTSDigital Out" are trademarks
of DigitalTheater Systems, Inc.
Note
DT8
There is no analog audio output when you
play a DTS sound disc.
Select On when connecting
[o a DTS Decoder
- Off: Doesn _omeut ol%al
stgna
- On: Cutouts DTS Bitstream
la alglTa/ou{put
Dynamic compression restrains the
dynamic range of the sound, ie. the
difference between the loud and
quiet passages of a DVD audio track
This is useful when watching a DVD
late at night.
Dynamic Compression
-
_n: When
t_e mo,,/le-
sounc_racKsare playeaa_
OW 'volume
or from smaller
speaker,ine systemcan apply
appropnaiecompressionto
make tow-eveelcon[entmore
n_eH_Jbleand preventdramatic
passagestrom gettingtoo _ua.
- Off : To select me standard range.
PCM Down Sampling
Note
- On: Select tn_swhen me
Am_lff er connec_eo _ome
Even when PCM Down sampling is Off
some discs will only output down sampled
audio through the digital outputs.
p_ayer_snot 96KH2
comoa_lble, n mls case me
96KHz signals w_llbe down
converted to 48KHZ.
- Off: Select this when the
AmetffJerconnectea come
b_ayer_s96KHz comoane_e.
n m_s case. all signals w_H
De ou_oucwimou_ any
cflan[,les.
ENG-56
DVD OPERATIONS
Setting
Up
the
Display
Options
Display options enable you to set various video functions of the player.
1
With the unit _nStop moae
press the MENU button on _ne
remote control.
2
Press the A!_' bL:_onsIo
select DVD. _nenpress the
or ENTER bu[[on.
3
Press the Al'V puc_onsto
select Display, then press
the _ or ENTER buscon.
_,_ - To make the DVD Setup menu
disappear, press the MENU button
4
Press the A!_' buttons to
_elec[ -_neaeslrea _tern.trlen
press the _" or ENTER
DU__On.
ENG-57
I
DVD
Display
1
OPERATIONS
Options
TV Aspect
Depending on the tl De of
teIevls_onyou nave, you may
wan[ _oaGus_.[ne sc_eer
se_[mg_aseecTrat _.
- 4:3 _etter Box: Select when j ou wan__osee _ne_otal 1E:9
ra[lo screen DVD SUbOHes.even _nougnyou nave a TV with
a 4:3 rat_oscreen. BlacK aars will appear a__netoe and
bottom of the screen.
- 4:3 Pan Scan: Select this for conventional size TVs when
ou wan[ to see the centraI poruon of the 16:9 screen.
Extreme iett and ngnt side of movie plcl:urewill De cut ott._
- 16:9 Wide: YOUcan wew tf e full 16:9 picture on your wloe
screen TV.
Black Level
Note
The Black Level feature
aa usts black reference tevel
in the video s_gnalto one of
[we choices:
It cannot be adjusted when AIt Video Out is
set to Progressive
- On: Tt s wm ennance me
Black LeveI tot _ncreased
urlgn[ness/con[rasi wnen
tew_ngDVDs
- Off: This is the Standard NTSC reference Black
Level for conslsten'i engnelessiconlras[ across a i sources.
Alt Video Out
-,_ - See yourTV owner's manual to
determine what type of TV you have
- Interlace: Interlaced Scan mode will
work.
The "Alt Video Out" opIIon
TlUS_De se[ In tne on-screen
menu if _ouhave connected
,'our DVD-VCR to a T\ using
the S-VIDEO OUT or
COMPONENT ViDE D OUT
- Progressive: Progressive Scan mode
will work and Video and S-Video will
not work
- Press the PROGRESSIVE button on
jacks.
- S-Video: Select wnen you want to use S-Wdeo
the front panel or remote control in
stop mode.
Be sure to set the correct Video
OU_DU[.
- Component: Select when .tou wan[ [o use
Comoonent interlace 5251 Out or
Progresswe(525p out.
output for the proper picture
ENG-58
DVD OPERATIONS
Setting
Up
the
Parental
Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps
you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc
1
with the DVD in Stoc mode.
Dress the MENU button on the
remo_e con_ro
2
Press the A!_ buttons "(o
select DVD then press the
or ENTER butte _.
3
Press the AIT buttons to
select Parental met press
the _ or ENTER bu_an.
4
Press the _ or ENTER
button to set ue password if
yOU warn
to use
a passwerd.
The Enter Password screen
appears.
- TOmake the DVD Setup menu
disappear, press the MENU button
5
Note
Enter your password.
The Re-enter Password
There is no default password.
_creen appears to contlrn
_ne password. Enter your
password agaIr
The player Is locKed
ENG-59
I
DVD
Setting
Up the
1
OPERATIONS
Rating
Level
1
With the unit _nSlop moae.
press the MENU butl )n on me
remo[e comrc
2
Dress Tee,&/'_' buttons _o
se_ec[DVD. [nen press the _,
or ENTER out[on
3
Press the _./_' buttons co
se_ec_Parental men press
[ne _ o[ ENTER button.
Enter /our password
4
Press the A/_
buttons to
select Rating Level then
press the _- or ENTER
DuI[on
_,_ - To make the DVD setup menu
disappear press the MENU button.
5
Press the A/T
bu_,zonsto
- For example, it you select up to Level
6, discs that contain Level 7, 8 will
not play
select the Ratm _ Leve_you
wan[. men press me _ or
ENTER button.
e.gI Setting up in Level 6.
ENG-60
DVD OPERATIONS
Changing
the
Password
1
w_tn the unit _nere') mode
press the MENU button on the
"emo[e control
2
Press the _&/_"buttons to
select DVD men yess the
or ENTER but[on.
3
Press the ,a,/_ buttons to
selecl Parental men press
•no _ or ENTER button
Enter you_ passwore
4
Press the ,&/T buttons to
select Change Password
men press the _ or ENTER
OU[_On.
-,_ - To make the DVD setup menu
disappear press the MENU button.
Note
5
Enter your new passworo.
Re-enter me nov passwora
If you forgot your password, press power on
from a cold start with no disc in the unit
Press the _/_
(Skip) buttons
simultaneously on the front panel for 5
seconds. The "Reset OK" message will
appear Press the POWER button.
again.
ENG-61
VCR OPERATIONS
In this chapter, you will learn how to play a video cassette tape, how to use the time counter and memory stop
features and how to record a program as you are watching TV.
Inserting
Tape
To
insert
and
a Video
Ejecting
Cassette
a Video
Cassette
Tape
Don't try te insert a tape upside down
er backwards.
Use only video tapes labeled "VHS _'
European PAL VHS video tapes and
S-VHS pre-recorded tapes arent
compatible with this unit Ohoose
brand name high quality tapes for
best results.
2:¸¸¸
::
i
Gently push the tape througt_
_-jj_.
._
-_
theoompa_me_t
doorUnti!
you[7"1_-_
!ee! the vCR pu!l !!-
_
TheVORieadstbetape
automatically.
To
Eject
a VBdeo
)
Cassette
/
If the safety tab of your video tape
has been removed, the tape begins
to play autematicalty Youdon't have
to press PLAY. For more infermation
on the safety tab, see page 74
/q
t
\
t
Tape
When yeu're finished playing a prerecorded video tape, its best te rewind it
to the beginning and remove it from the
VCR to protect it from wear and tear.
1
Press Ine I iStoD) button tc
stop playing tne tape.
After ejecting a tape you should remove
it completely from the compartment and
turn off the VCR.
2
ENG-62
VCR OPERATIONS
Playing
Tape
Pmaying
a Pre-Recorded
the
Video
Cassette
Tape
-_ = For more information on the safety
tab, see page 74
1
2
svu
¥cH
f the tape doesn _ DegmcoE ay
automatic rely, press me HI
Play/Pause bunion.
-_ - The VCR does not play sound while
a video tape is paused
3
Pausing Play
It you see white lines on the screen,
see "Using Automatic Tracking" on
page 65
While a tape _spraying, press
the _41P ay!Pause button
wnen. ou wan__o m_e_ruptpray.
The tape pauses temporamy.
Press the _,H(Play!PauseI
Dut_onto resume p_aymgme
tape.
ENG-63
I
VCR
SpeciaJ
1
OPERATIONS
VCR
PJayback
Features
Whib a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame
Advance, Skip, Repeat and more. Press the Play/Pause button again to resume norma{ playback.
Frame Advance
in _ne .)ause meae. sress
F.ADV to aavar secotoe nex]
frame
Fps_ps
J
Review
In Play moae, press toe
Forward or _ /Rewind} to
'ewew a[ iwo soeeus.
- Picture $6 _rch: Press and
re}ease t( _avance toe tape
forwara or rJac4ward at 5
times normal soeea.
- Jet Search: Press and hold
aown the SEARCH buttoP
then release tt to play back a[
toe normal speea.
Sk{p
m Play moae_press the SK{P
uui_onto move ahead exact{y
30 seconds. Press the SKIP
sutton repea[eaiy up to 4 times
_0 move aneaa 2 minutes
Repeat
- {n Play mode, press toe
_ast5 seconds of taoe/8F
moae
REPEAT outran to review the
- In Play moae_press 1he
REPEAT button _oreview toe
/
......
_
i_iils
._
sn
}as115 seconds at tape SL°
moae
ENG-64
VCR
I
OPERATIONS
Shottle
In Play mode, Shuttle
@
>>
gradually increases the cue
(1}
speed: Double Seeee play[}acK
Ptcture Search -_ de[
Search.
Shuttle << graouaw
s_owsdown [ne tape, [nen
goes Into Slow mode Still
moae Reverse P_cture Searcr
and Reverse Jet Search
© |
{2}
4-_7e_"_s__d/
_
i
....©
o
Each Eime you press tne
SHUTTLE button me pBa_Pack
soeed _sdifferent accordingly.
Using
Automatic
Tracking
The Tracking adjustment removes the white lines that sometimes appear during playback because of slight
differences in recording decks. The TRK button will automatically align the recorded tracks with the playback
heads to solve this problem. You may also set tracking manually.
1
insert and play a video
cassette tape.
As soon as the tape begins
to play, the VCR begins
jf automatic tracking doesn't }
remove the streaks from the
picture, press and hoid the
TRK@ or TRKL_ button
until the streaks disappear.
ENG-65
I
VCR
Selecting
1
OPERATIONS
the
Cassette
Type
If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the
type of cassette inserted.
1
Press the NENU button on lne
temo[e contro_
2
Press ttle i!T burlons to
select VCR ther press the _or ENTER button.
Note
3
Press the I/_
This information Js usually printed on the
tape box. The menu cycles through: %120,
%160 or %180.
Once the type of cassette is set the VCR
can display the amount of time remaining on
the tape when you press the INFO. button
buttons to
select Tape Length_ then
press the _ or ENTER
burton io select ine correcl
cassette _eng_n.
4
Press the MENU buttonto exit
ENG-66
VCR OPERATIONS
Setting
the
Auto
Play
It you want your videotapes to play automatically when you insert them, turn on Auto Play
Note
Only tapes that are missing the Record
Safety Tab will play automatically when
inserted (See page 62)
1
Press the MENU button on the
"emote control,
2
Press trle i _ buttons to
select VCR _henpress the
or ENTER button.
- On: The VOR will automatically begin
playing a video tape when it is
inserted, as long as the sabty
tab ot the cassette has been
removed.
3
Press the A _' buttons to
"[nem or ENTER ouIIon [o
se[ect On or Off.
- Off: Auto play is disabled.
4
Press the MENU DUI_On[o exit
ENG-67
I
VCR
Setting
1
OPERATIONS
the
Auto
Repeat
If you want your videotapes to play repeatedly, turn on Auto Repeat.
1
Press the MENU button on 1ne
remote
coa[roi
2
Press the A/'v buttons to
select VOR _nen press the
or ENTER button.
_l
3
Press the A/V" buttons to
select Auto Repeat. then
press the I_ or ENTER
button to seiect On or Off
- On: The VCR will play a tape
repeatedly [unless a tape control
is activated (stop tast forward or
rewind)]
- Off: Auto Repeat is disabled.
4
Press the MENU outton to exl_
ENG-68
VCR OPERATIONS
Using
the
Tape
Counter
The tape counter:
Indicates the elapsed time in the play and record modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VOR
- Allows you to easily find the beginning of a sequence
If the remaining time is to be calculated correctly, you must indicate the type of cassette being used
1
nsert
a cassetie
[n jour
DVD-
VCR. To set the taoe coumer
to zero a[ me oeglnnlng at a
sequence
- °'ass the mNFO.LJi[on twice
[o display the counter
Press the CLEAR button
wrier joe wan[ to se[ the
[ape counter [o zero
2
When you are reaay
- Starl pla} oack or Rec )ruing.
Press the ! [Stoo #uuan.
- To fast4orward or rewind to
the sec uence at which the
]cuRler was set 1ozero.
presstnetne_
Forward or
44 _Rewlnd_ear[on
- Some 3VD-VCR information sucn as tne counier, can be
displayed on the tele\ s_on screen.
Press the INFO. button.
Once to display the current function, recora_ngspeea aria
:ounIer.
- Twice to dlspla_ the courtier onIj.
- Three tlm,es to display [rie lEna rematnlno on the casser[e
- Four rimes [o clear [he display.
ENG-69
I
VCR
Using
the
1
OPERATIONS
Assemble
Edit
Function
This function atlows you to start e new recording at a specific position on the cassette while maintaining e very
smooth scene change.
1
inser[ 1Decassel_e To Deeal[ea
Jnyour D iD-VCR.
2
Press the _ll Play/Pause)
nut,on to s_ar[pBayDacK.
3
when you reacn the posliton
frog
wRIoll
jou
wish
IO start
[ne new recoroing, press [ne
_l (Play!Pausel eu_on.
4
Press the EADV button as
often as necessa[, [o advance
tame b frame Jntll the exact
recora_ngpos_t_on_sDcatee.
_u_
J
5
wr; te [he DVD-VCR _sin
pause meae. Dress tne REC
button. The pause _nodeis
dispiayea on [ne screer
ENG-70
VCR OPERATIONS
television channel.
- The INPUT SEL. button for
the LINE1 or LINE2 input
Selecting
the
Audio
Output
Mode
You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs.
The following options are available.
Press the AUDJO button on the
remote control until the
I
(!)
I_
(_
(_:)
_
_,,_
Audio output Mode
Left : Used to listen to the sound on the left Hi-Fi channel.
Right: Used to listen to the sound on the right Hi-Fi channel.
Mono: Used to listen to the sound on the normal mono channel
Hi-Fi : Used to listen to Hi-Fi stereo sound on the left and
right channels When playing back tapes recorded in
Hi-Fi the sound switches to Hi-Fi after five seconds of
Mono
ENG-71
I
VCR
Searching
1
OPERATIONS
for
a Specific
Sequence
Each time you record a cassette on this DVD-VCR, an "index' is automatically marked on the tape when
recording starts
The Search function allows you to fast-forward or rewind to a specific index and start playback from that point
Depending on the direction selected, the indexes are numbered as fotlows:
¢
_i
seq.
be,ng
_i
etcl seq.I p,ayedI Se_I etc
2
1
1
2
This DVD-VOR uses a standard indexing system (VlSS). As a result, it witl recognize any indexes marked by
other VORs using the same system and vice versa.
1
Press the MENU b_,i_on on tne
ren.ote con:tel.
2
Press the A/T buttons to
_eiec_Function. tber Dress
the _ or ENTER out,on
3
Press the ,&IT bunons to
_eIect VCR Function men
press the _ or ENTER
bU*[_On.
VCR Function can De
displayed simply by pressing
the SEARCH Dut_on
4
Press the A/T buttons zo
seIecI _nedesired
sress the _ or ENTER
buI[on.
ENG-72
VCR OPERATIONS
Variable
Search
System
Go To [0:00:00] Stop
use this feature wnen yOt
want to searcn _orthe 0:00:00
eounler
oos[[Ion
on a
cassette.
Press the CLEAR button at
cne poln_on -_ne1ace where
you warn _ose_ me counter _o[0:00:00].
The VCR will rewind or fast forward, searching tot the
0:00:00 coumer posmon, ann men au-_orr_E_caHy
s_opa,,ma._
pOSElO[1
End Search
use mis feature when
want to search for a blank
9OStTion iO recora a program
on a casse-ae.
The VOR will fast torwara
searching for a blank oosmon
and znen au[oma_cauy slop a( ma,,oosmon.
if the VCR reaches me end of the taDe dunng end searcn
me _apewill Be ejec[eo.
Scan and play
Use scan and play when you
aon_ Know exacny wnere a
program is tocated on a
cassette rope
- Forward _ntro Scan
Select "Forward Intro Scan'
men Dress me ENTER button
- Reverse Intro Scan
Select "Reverse Intro Scan'. men press the ENTER button
ENG-73
I
VCR
Basic
1
OPERATIONS
Recording
You can record a TV show in progress by inserting a blank tape and pressing the REC button
You can even add time in 30-minute increments up to 4 hours by pressing the REC button repeatedly:
see page 76
Note
Be sure your videotape has a Record Safety Tab It the tab is missing, you can cover the opening with a small
piece of tape Warning: Do not cover this opening unless you are sure you want to record over the tape.
Before You Begin...
- Power on the DVD-VOR
- Power on the TV
Protecting
a
Recorded
Cassette
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot
record on the tape.
If y0u wish to pf0tect a
Cassette,break off the tab
I
I
_
Using a small Screwdriver
To re4ec0rd over a protected
I
J
_
_(_"}
"_D
//_
cassette (safety tab broken),
€over the hole with adhesive
tape.
I
_° ,,._o,a
'-'s,,f_.t,T.b
-'
I
Recording
rosen a blank VHS [ape n[o
the VOR deck.
Make sure the tape is long
enough to record the entire
program.
Press the SPEED button to se]
"_ _"_"
[7" ) _
Z_
_
\
_"
,/ /
"_]L
i\
_
m,
"_
\
)
/
\
[o ine recelo speea.
_Seepage 77)
2
use the Number buttons or the CH _. or 'v buttons to setecl
me aeslrea cnanne or )tess the iNPUT 8EL button to
sel6 stUne 1 or 2 if recording from an externat device
connected to the front or rear jacks, respectwety.
ENG-74
VCR
I
OPERATIONS
Note
3
Recording from the DVD-VCR to the VCR is
not possible.
Press the REO button on tne
remote control or front panel.
For oo[_enswh_le recording is tn
prog ess. see "Special Recording
Features on tnls page.
4
/
Pause/Resume Recording
Press the _H (PlaylPause)
CUr[On
Press the REC button aga n re
resume.
Stop Recording
Press the []/StoP) button
Special
,,F_,_-_
Recording
.
_-,-r'_,
Features
While a recording is in progress, you can watch a different channel or a DVD, or add recording time in 30minute increments
To Watch
a different
Channel
while
Recording
Make sure that you connect the DVD:VCR to the TV using
an RF Cable.
- When you watching through the Antenna input during
recordingl press the TVNCR button on the remote centre!,
Using your TV remote €ontro!_change the channel you
when you watching through Line input during recording,
change the input of yourTV bm Line to Antenna. Using
your TV remote c0ntro!, change the channe! you want to
watch.
ENG-75
I
VCR
To
Watch
a
BVD
1
OPERATIONS
while
Recording
Insert a DVD in the DVD tray and press the Hi
(Play/Pause). The output wi!l autQmat!caJ!ychange to the
DVD,
To
Add
Recording
Time
See One-Touch Recording (OTR)below.
Using
One-Touch
Recording
One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 4 hours at the
touch o! a button.
1
,nsert
abanKVNStape,n,o
thovcR0ec
!
2
Use the Number buttons or the OH A or _' buttons to select
lhe desired cnanne_ or Dress the iNPUT SEE button to
select Line 1 or 2 it r_ :ording from an external device
connected to the fron_ or rea_ _acKs,respectwe_y.
:3
Press the REC button on _ne
remo_econtrol or rron_cartel
ENG-76
VCR OPERATIONS
4
While m Recor ] moue _3ress
the REC button again to
acwate One-Touch Recoruing
OTR;
Record length 0:30 appears
on Tle On-screen display an{
the DV[ -VCR wili record for
exac[ly 3Ommu[es.
5
Add Recording Time
Continue pressing REC
button Io and recording rime
n 3Om_nu_emcremems uEto
4 flours.
The DVD-VOR stc 3s
recolaing automatlcalt:;,wnen
me rime has elapsed. The
DVD-VCR wilt automaticah_ De
wrneo oft when the OTR
finished.
Selecting
the
Recording
Speed
"Youcan stow down the recording speed from SP to SLP in order to fit six hours of programming on a %120
tape.
Note
Press the SPEED button on the
remote control to seleCt the
_,_//
...._
The selected Record Speed will appear on
the front panel display and on-screen
display.
Record
Speed
S£: StandardP!aY, forbest
qua!!tY
sLp: Super Long Play, for
maximum recording
time (3 times SP).
_'"\
J
]
_
s=q /
V
Maximum Recording Time = SP vs. SLP
TapeLength
SP (StandardPlay) SLP (SuperLongPlay)
%120
2 hrs
6 hrs
%180
2hrs 40 mins
8 hrs
%180
3 hrs
9 hrs
ENG-77
I
VCR
Using
1
OPERATIONS
a Timer
Recording
Insert a blank videotape into the VCR decK. Be sure to leave the Record Safety Tab intact.
With the Timer Recording function, you can program up to 7 events at a time to record up to a month in
advance
To Begin Betting the Timer Recording,
- Power On your DVD-VCR.
- Power On your TV.
1
Press the MENU button on me
remote control
2
Press the A! '_ buttons to
setect PROS men pressme
or ENTER button.
t can De a_sp_ayeos_mply Dy
Dress "_gthe TIMER button
3
Select Channel Number
Press the _ button, men
press me A/_' buttons m set
me
orlanRel
Press the _ button [o nl _ve
[0 me next sm[im
4
Note
You can select external input directly
(L1 or L2) using iNPUT SEL. button
Bet Time/Date/Speed
RepeatBte_ 5 above to set
siarl:l:lme end time. da_eand
_ecola
sDeecL
Date can be set for one brae
oa_lyor weekly recording
ENG-78
VCR OPERATIONS
Selecting Auto Speed
If the length of the videotape is not long enough for a timer
recording in the SP mode, set the recording tape speed to
"Auto Recording will start in the SP mode. II the length is not
long enough, the tape speed will automatically change trom SP
mode to SLP mode.
Daily/Weekly Date Programming
Weekly [sun'sNsat's]: Use this to record TV programs on the
same channel at the same time every week Daily [NO - FR] :
Use this to record TV programs on the same channel at the
same time every day Monday through Friday.
Save Timer Recording
Press the RETURN bu[ton lo
tlnlsh setting trle m_er
recoralng
Stop the DVD-VC£ or [urn me
3ower ( ft. Then the DVD-VOR
wlJlautomatma., [urn on and
eegm _ecoro_ngat me lime yoL
set.
To stop tr_etimer recoralnc
3ress the POWER outton o[
press the [] Stop button
twice
ENG-79
REFERENCE
Troubleshooting
Before contacting a Samsung authorized service center, perform the following simple checks
If you are unable to solve the problem after reading the above instructions, note:
- The model and serial number on the rear of your DVD-VCR
- The warranty information
- A clear description of the problem
Then contact your nearest SAMSUNG service center
identifying
DVD
Problem
Problems
Action
Page
. Check the batteries in the remote controt.
No operations can
be performed with
the remote control
Disc does not play
They may need replacing.
. Operate the remote control at a distance of no more than 20 feet.
. Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to
reset it Reinstall batteries and try to operate the remote control
again
. Ensure that the disc is installed with the label side facing up
. Check the region number of the DVD
P3
P7
. 51 channel sound is reproduced only when the following
conditions are met:
5.1 channel sound
is not being
reproduced
The @ icon
appears on
screen
1) The DVD-VOR is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
. Check whether the disc being played has the "5.1 ch" mark on
the outside
. Check if your audio system is connected and working properly
. In a DVD Setup Menu, is the Audio Output set to Bitstream?
P18
. The features or action cannot be completed at this time because:
1. The DVDs software restricts it.
2. The DVDs softwaredoesn't supportthe feature (e.g.,angles)
3. The feature is not available at the moment.
4. Youve requested a title or chapter number or search time that is
out of range.
DiscMenudoesnt
appear
. Check if the disc has a Menu
Play modediners
from the Setup
Menuselection,
. Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding
function.
The screen ratio
cannot be changed.
. The Screen Ratio is fixed on your DVDs.
No audio
. Make sure you have selected the correct Digital Output in the
Audio Options Menu.
P39-40
ENG-80
P55_56
REFERENCE
Problem
Action
The screen is
blocked
Page
• Press the 4._/_,_,_button for more than 5 seconds with no disc in
the unit All settings will revert to the factory settings.
• Press the from a cold start with no disc in unit press the 44/_¢_
button simultaneously on the front panel for 5 seconds. All
settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
Forgot password
If you experience
other problems
. Clean the disc.
VCR
Problem
Problems
Action
Page
No power
• Check that the power plug is connected to a wall outlet
You cannot insert
a video cassette
• A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television
• Check the DVD-VCR antenna/cable
program was not
recorded
• is the DVD-VCR tuner properly set?
• Check if the safety tab is intact on the cassette.
Timer recording
was unsuccessful
• Re-check the recording start/stop time settings.
• if there was a power failure or interruption during timer
recording, the recording wil! have been cancelled.
No playback picture
or the picture is
distorted
• Check to see if you are using a prerecorded tape.
You cannot see
normal broadcasts
• Check the tuner or external setting. It should be on tuner.
• Check the TV or VCR antenna connections.
Noise bars or
streaks on playback
• Press the TRK buttons to minimize this effect.
When the _.11button
is pressedduring
playback,the still
picture has severe
'noise bars" streaks
• A still picture may have "noise bars", depending on the
condition of the tape. Press the TRK buttons during slow
motion to minimize this effect.
Cleaning
P59-61
that contains the explanations regarding the current problem and
follow the procedure once again.
• If the problem still cannot be solved please contact your nearest
authorised service center
noisy or distorted
identifying
]
P62
connections.
P78-79
P74
P65
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
ENG-81
I
REFERENCE
Technical
1
Specifications
AUDIO
2 Stereo audio inputs ROA Connector -8dbm, 47K0,
front and rear
inputs
VIDEO
20omposite video inputs, ROA Oonnector, 750, 1Vp-p
RF
Antenna or OATV Input, F-Oonnector, 750
AUDIO
1 Stereo audio outputs, ROA Oonnector, -8dbm 1 5KO
AUDIO (DVD only)
1 Digital audio output (1 coaxial)
1 pair Stereo audio outputs
Outputs
VIDEO
10omposite video output ROA Connector, 750, 1Vp-p
VIDEO (DVD only)
1 S-Video output, S-Connector, 750 Y=I 0Vp-p,
C=0.286Vp-p
1 Component video output 750 Y=l.0Vp-p
Pb=0 7Vp-p,
Pr=0.7Vp-p
RF
Channel 3 or 4
VIDEO SYSTEM
1/2-inch VHS system 4 rotary head helical scanning;
FM azimuthluminance;chrominance:convertedsub system
phase shift
VOR
AUDIO TRAOK
Normal: 1 track; Hi-Fi: 2 track
PLAY/REOORD TIME
%180 tape: SP 3 hours, SLP 9 hours
FF/REW TIME
%120 tape: <2 minutes
HEADS
Video:
DA 4 rotary
Audio:
2 rotary heads (Hi-Fi); 1 stationary head (Linear)
Control:
1 stationary head
Erase:
1 full track 1 audio track
WOW & FLUTTER
Less than 0005% (Hi-Fi)
FREQ RESPONSE
20-20,000 Rz (Hi-Fi)
DISO COMPATIBILITY
OD, OD-R OD-RW
DVD-Video, CD-Digital Audio (5" and 35")
DVD
SYSTEM
FREQ RESPONSE
96/48 kHz Sampling: 4 Rz-22kHz
S/N RATIO
110 dB
DYNAMIC RANGE
96 dB
THD
0.003 %
POWER REQUIREMEN
120V AC, 60 Rz, 25 watts
ENVIRONMENT
41-104'F (5-40°C); 10%-75% humidity
WEIGHT
13.8 Ibs.
- Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice.
- Weight and dimensions are approximate.
ENG-82
I
REFERENCE
Warranty
THIS SAMSUNG BRAND PRODUCT AS SUPPLIED AND DISTRIBUTED BY SAMSUNG ELECTRONICS
AMERIDA INO (SAMSUNG) AND DELIVERED NEW IN THE ORIGINAL OARTON TO THE ORIGINAL
CONSUMER PUROHASER IS WARRANTED BY SAMSUNG AGAINST MANUFAOTURING DEFEOTS IN
MATERIALS AND WORKMANSHIP FOR THE FOLLOWING LIMITED WARRANTY PERIOD:
One (1) Year Parts / Ninety (90) days Labor
This limited warranty begins on the original date of purchase and is valid only on products purchased and
used in the United States, and does not include transportation, installation, removal or reinstaltation
WARRANTY REPAIRS MUST BE PERFORMED BY SAMSUNG'S AUTHORIZED SERVlOE OENTER.
TO REDEIVE WARRANTY SERVICE, THE ORIGINAL DATED BILL OF SALE MUST BE PRESENTED UPON
REQUEST AS PROOF OF PUROHASE TO SAMSUNG OR SAMSUNG S AUTHORIZED SERVIOE OENTER
TRANSPORTATION TO AND FROM THE SERVIOE OENTER IS THE RESPONSIBILFY OF THE
PUROHASER.
SAtVlSUNGWILL REPAIR OR REPLADE THIS PRODUOT, AT OUR OPTION AND AT NO OHARGE WITH
NEW OR REOONDmONED PARTS, IF FOUND TO BE DEFECTIVE DURING THE LIMITED WARRANTY
PERIOD SPEOIFED ABOVE The product must be returned during the warranty period with transportation
charges prepaid to SAMSUNG's designated service center. Prior to returning any product for warranty
service, the purchaser must contact SAMSDNG for problem determination and service procedures.
SAMSUNG DOES NOT WARRANT UNINTERRUPTED OR ERROR-FREE OPERATION OF THE PRODUCT.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal
noncommercial use of this product and shall not apply to the following including, but not limited to: damage
which occurs in shipment; applications and uses for which this product was not intended; failures or problems
which are caused by products or equipment not supplied by SAMSDNG: accidents, misuse, abuse, neglect
misapplication, fire, water, lightning or other acts of nature: incorrect electrical line voltage fluctuations or
surges; damage caused by improper or faulty installation; improper connection with any peripheral; product
alteration or modification; improper or unauthorized repair; cosmetic damage or exterior finish: product with
altered serial numbers; failure to follow operating instructions, customer adjustments maintenance and
environmental instructions that are covered and prescribed in the instruction book; use of nomSAMSUNG or
unauthorized parts, supplies accessories or equipment which damage this product or result in service
problems; failures or problems due to incompatibility with other equipment.
ELECTRONICS
HEADQUARTERS
105 Chalienger Road
Ridgefield Park, NJ 07660=0511
TEL: I=800-SAMSUNG
SERVICE DiViSION
400 Valley Road, Suite 201
Mount Ariington, NJ 07856
1-800=SAMSUNG (1=800=726o7864)
www.samsung.oom
AK68-00593A=00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 85 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Thu Apr 05 01:59:16 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools