Samsung 591Sg Users Manual File

SyncMaster 794V 10246002

591SG 10254139

2015-01-23

: Samsung Samsung-591Sg-Users-Manual-276657 samsung-591sg-users-manual-276657 samsung pdf

Open the PDF directly: View PDF .
Page Count: 82

Download
Open PDF In Browser	View PDF

Install driver

Install programs

SyncMaster 591S/591SG/591V/594MG/592V/
794V/793DF/793MG/793SG/793V/
794MG/793S/783DF/788DF Plus

Notational

Failure to follow directions noted by this symbol could result in bodily harm or damage to
the equipment.

Prohibited

Important to read and understand at all times

Do not disassemble

Disconnect the plug from the outlet

Do not touch

Ground to prevent an electric shock

Power
When not used for extended periods of time, set your computer to a screen
saver.
z

If the same image is present for long periods of time, Phosphor Burnt can be
occured, or the screen may be blurred.
The images here are for reference only, and are not applicable in all cases (or

countries).
Do not use a damaged or loose plug.
z

This may cause electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.
z

This may cause electric shock or fire.

Use only a properly grounded plug and receptacle.
z

An improper ground may cause electric shock or equipment damage.
(Class l Equipment only.)

Insert the power plug firmly so that it does not come loose.
z

A bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon
them, which could cause damage.
z

This may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet.
z

This may cause fire.

Do not disconnect the power cord while using the monitor.
z

A surge may be caused by the separation and may damage the monitor.

Do not use the power cord when the connector or plug is dusty.
z

If the connector or plug of the power cord is dusty, clean it with a dry
cloth.
Using the power cord with a dusty plug or connector may cause an
electric shock or fire.

To disconnect the apparatus from the mains, the plug must be pulled out
from the mains socket, therefore the mains plug shall be readily
operable.

This may cause an electric shock or fire.

Installation
Be sure to contact an authorized Service Center when installing your monitor in a
location with heavy dust, high or low temperatures, high humidity, and exposed
to chemical substances and where it operates for 24 hours such as at airports,
train stations etc.
Failure to do so may cause serious damage to your set.
Put your monitor in a location with low humidity and a minimum of dust.
z

Failure to do so may cause electric shock or fire inside the monitor.

Do not drop the monitor when moving it.
z

This may cause damage to the product or the person carrying it.

Install the monitor base in a showcase or shelf so that the end of the
base does not protrude from the showcase or shelf.
z

Dropping the product may cause damage to the product or the person
carrying it.

Do not place the product on an unstable or small surface area.
z

Place the product on an even end stable surface ,as the product may fall
and cause harm to someone walking by, specifically children.

Do not place the product on the floor.
z

Take care, as someone, specifically children may trip over it.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
z

Otherwise, this may cause fire.

Keep any heating devices away from the power cable.
z

A melted coating may lead to electric shock or fire.

Do not install the product in places with poor ventilation, for instance, a
bookshelf, closet, etc.
z

Any increase in internal temperature may cause fire.

Set down the monitor carefully.
z

The monitor could be damaged or broken.

Do not place the monitor face down.
z

The CDT surface may be damaged.

Do not use the monitor without the monitor stand.
z
z

It could break down or cause fire due to bad ventilation.
If the monitor must be used without the supplied stand, take steps to
insure proper ventilation.

When installing the product, make sure to keep it away from the wall
(more than 10 cm/4 inches) for ventilation purposes.
z

Poor ventilation may cause an increase in the internal temperature of
the product, resulting in a shortened component life and degraded
performance.

Keep the plastic packaging (bag) out of children’s reach.
z

The plastic packaging (bag) may cause suffocation if children play with
it.

Clean

When cleaning the monitor case or the surface of the CDT, wipe with a slightly

moistened, soft fabric.
Do not clean Flat monitor with water. Use a water-diluted mild detergent.
(Some detergents contain significant amounts of alcohol-based solvents, which
can damage (color change) or crack the monitor case. The antiglare/anti-static
surface coating on the CDT may also be affected.)
Dilute the detergent (1:10 ratio) with water before using.
Do not spray water or detergent directly onto the monitor.
z

This may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.
z

You may prevent the coated CDT from being damaged or the monitor
cabinet from being dissolved, cracked or discolored.
You may buy a recommended detergent at any Service Center.

If the connector between the plug and the pin is dusty or dirty, clean it
properly using a dry cloth.
z

A dirty connector may cause electric shock or fire.

Make sure to unplug the power cord before cleaning the product.
z

Otherwise, this may cause electric shock or fire.

Unplug the power cord from the power outlet and wipe the product using
a soft, dry cloth.
z

Do not use any chemicals such as wax, benzene, alcohol, thinners,
insecticide, air freshener, lubricant or detergent.

Contact a Service Center or Customer Center for interior cleaning once a
year.
z

Others

Keep the product's interior clean. Dust which has accumulated in the
interior over an extended period of time may cause malfunction or fire.

Do not remove cover(or back).
z
z

This may cause electric shock or fire.
Refer to a qualified servicing company.

If your monitor does not operate normally - in particular, if there are any
unusual sounds or smells coming from it - unplug it immediately and
contact an authorized dealer or the Service Center.
z

This may cause electric shock or fire.

Keep the product away from places exposed to oil, smoke or moisture;
do not install inside a vehicle.
z
z

This may cause malfunction, an electric shock or fire.
Especially avoid operating the monitor near water or outdoors where the
monitor could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off
and unplug the power cord. Then contact a Service Center.
z

The monitor may cause a malfunction, electric shock or fire.

Disconnect the plug from the outlet during storms or lightning or if it is
not used for a long period of time.
z

Failure to do so may cause electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal
cable.
z

This may cause a breakdown, electric shock or fire due to damage to the
cable.

Do not move the monitor right or left by pulling only the wire or the
signal cable.
z

This may cause a breakdown, electric shock or fire due to damage to the
cable.

Do not cover the vents on the monitor cabinet.
z

Bad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects
on the monitor.
z

This may cause malfunction, an electric shock or fire.

If a foreign substance enters the monitor, unplug the power cord and
contact the Service Center .

Do not place any heavy objects on the monitor.
z

This may cause electric shock or fire.

Keep the product away from combustible chemical sprays or
inflammable substances.
z

This may cause an explosion or fire.

Never insert anything metallic into the monitor openings.
z

This may cause electric shock, fire or injury.

Keep the monitor away from any magnetic substances.
z

This may cause discoloring or distortion of the image.

Viewing the monitor continuously at a too close angle may result in
damage to your eyesight.

To ease eye strain, take at least a five-minute break after every hour of
using the monitor.

Do not install the product on an unstable, uneven surface or a location
prone to vibrations.
z

Dropping the product may cause damage to the product or the person
carrying it. Using the product in a location prone to vibrations may
shorten the lifetime of the product or may catch fire.

When moving the monitor, turn off and unplug the power cord.
Make sure that all cables, including the antenna cable and cables
connected to other devices, are disconnected before moving the
monitor.
z

Failure to disconnect a cable may damage it and lead to fire or an
electric shock.

Place the product out of children’s reach, as they could damage by
hanging onto it.
z

A falling product may cause injury to the person or even fatality.

When not using the product for an extended time period, keep the
product unplugged
z

Otherwise, this may cause heat emission from the accumulated dirt or
degraded insulation, causing electric shock or fire.

Do not place children's favorite objects (or anything else that may be
tempting) on the product.
z

Children may try to climb on the product to retrieve an object. The
product could fall, causing physical damage or even death.

Good Postures When Using the Monitor
Try to maintain a good posture when using the monitor.
z

Keep your back straight.
Keep a distance of about 45 ~ 50 cm between your eyes
and the monitor screen. Look at the screen from slightly
above it, and have the monitor directly in front of you.
Tilt the monitor upwards by 10 ~20 degrees. Adjust the
monitor height so that the top of the monitor is slightly
below eye level.
Adjust the monitor angle so that there is no reflected light
on the screen.Try to maintain your arms perpendicular to
your armpits.

Keep your arms level with the back of your hands.

Keep the angle of the elbow perpendicular.

Keep the angle of the knees at more than 90 degree. Do
not let your feet fall up from the floor. Adjust the arm
position so that it is below the heart.

SyncMaster 591S/591SG/591V/594MG/793DF/793MG
793SG/793V/794MG/793S/783DF

Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.

Unpacking
Monitor and Stand

(Some models include a stand attached.)

Manual

Quick Setup Guide

Cable

Warranty Card
(Not available in all
locations)

User's Guide,
Monitor Driver,
Natural Color software,
MagicTune™ software

Power Cord
Stand

Stand

For Multimedia model (Option)
Manual

User Guide
Cable

Sound Cables(2each)
Stand

Multimedia Speaker Stand

Front

DC Power Cord

Menu button [MENU]

Opens the OSD menu. Also used to exit the OSD menu or
return to the previous menu.

Adjust buttons [

These buttons allow you to highlight and adjust items in the
menu.

]

Enter button [ ]

Used to select the OSD menu.

Power button [ ]

Use this button for turn the monitor on and off.

Power indicator

This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.

Rear

(The configuration at the back of the monitor may vary from product to product.)

Power port

Connect the power cord for your monitor to the power port on
the back of the monitor.

Signal Cable

Connect the signal cable to the video port on your computer
(video board, video card, or graphics card).

See Connecting the Monitor for further information regarding cable connections.

Bottom

Tilt/Swivel Base

You can separate the base from the monitor.

SyncMaster 592V/794V/788DF Plus

Please make sure the following items are included with your monitor.
If any items are missing, contact your dealer.
Contact a local dealer to buy optional items.

Unpacking
Monitor and Stand

(Some models include a stand attached.)

Manual

Quick Setup Guide

Cable

Warranty Card
(Not available in all
locations)

User's Guide,
Monitor Driver,
Natural Color software,
MagicTune™ software

Power Cord
Stand

Stand

For Multimedia model (Option)
Manual

User Guide
Cable

Sound Cables(2each)
Stand

Multimedia Speaker Stand

Front

DC Power Cord

Menu button [MENU]

Opens the OSD menu. Also used to exit the OSD menu or
return to the previous menu.

Adjust buttons [

These buttons allow you to highlight and adjust items in the
menu.

]

Enter button [ ]

Used to select the OSD menu.

Power button [ ]

Use this button for turn the monitor on and off.

Power indicator

This light glows green during normal operation, and blinks green
once as the monitor saves your adjustments.

Rear

(The configuration at the back of the monitor may vary from product to product.)

Power port

Connect the power cord for your monitor to the power port on
the back of the monitor.

Signal Cable

Connect the signal cable to the video port on your computer
(video board, video card, or graphics card).

See Connecting the Monitor for further information regarding cable connections.

Bottom

Tilt/Swivel Base

You can separate the base from the monitor.

Connecting the Monitor

Setup-For Multimedia model | Multimedia Speaker Stand

Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.
2-1. Connecting to a computer
Connect the signal cable to the 15-pin, D-sub connector on the back of your computer.

2-2. Connecting to a new Macintosh
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.

Setup-For Multimedia model

Turn off your computer and unplug the power cord.

Connect the end of the signal cable to your computer's video port(video board, video card or
graphics card).

Connect one end of the other sound cable to the Mic Input jack on your sound card or
computer.Connect the other end of this cable to the Mic By-pass jack on the back of the
monitor stand.

Plug the DC power cord from the stand into a nearby outlet.

Connect the power cord for your monitor to the power port on the back of the monitor.

Plug the power cord for the monitor and the power cord for your computer into a nearby
outlet.

Turn on your computer and monitor.

Turn up or down the On-Off control terminal on the stand of the monitor until it clicks.

Execute a sound program, music or sound effect in your computer and then adjust the volume
by turning up or down until the sound volume is appropriate.

10.

Adjust the treble and bass.
Sound distortion may occur when the monitor is placed on top of a mostly hollow cabinet
such as your computer. If this occurs, place a pad or magazine beneath the monitor stand.
High sound volume may also cause sound distortion; lower the volume.

Multimedia Speaker Stand
1.

Mic By-pass Jack
To transmit your voice,connect a sound cable from
the Mic By-pass jack to the mic in jack on the sound
card slot in your computer.

Stereo Input Jack
Connect a sound cable from the input source(sound
card,computer,CD-ROM drive).

DC Power Cord
Connect DC power cord to monitor DC 12V output
jack.

Power Indicator
Glows green when the speakers are turned on.

On/Off Volume
Turns On/Off and adjusts the output volume.

Treble Control
Use to control high frequencies.

Bass Control
Use to control low frequencies.

Mic Input Jack
To transmit your voice,connect a microphone to this
jack.

Headphone Jack
To listen in privacy,connect headphones here.

10.
Detachable Stand Top

Base Installation

Tilt/Swivel Base | Attaching and Removing the Base
Tilt/Swivel Base
With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable
viewing angle.

The base is detachable.

Attaching and Removing the Base
If your monitor was supplied with the base detached, attach the base as follows.

Remove the twist-tie before attaching the base to the monitor.

Attaching the Base
1.
2.
3.
4.

Place the monitor upside-down on a flat work surface.
Align the tabs on the base with the corresponding slots on the bottom of the monitor.
Press the base onto the monitor until the tabs are fully engaged in the slots.
Push the base toward the front of the monitor until the release latch clicks into the locked
position.
* Do not bend the snap.
Removing the Base
5. Squeeze and pull up on the release latch on the base.
6. Push the base toward the back of the monitor and lift up to remove the base.
The base will align with the monitor slots in only one position.

Installing the Monitor Driver(Automatic)

When prompted by the operating system for the monitor driver, insert the CD-ROM

included with this monitor. Driver installation is slightly different from one operating
system to another. Follow the directions appropriate for the operating system you
have.
Prepare a blank disk and download the driver program file at the Internet web site shown
here.
z

Internet web site :

http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)

1. Insert the CD into the CD-ROM drive.
2. Click "Windows"
3. Choose your monitor model in the model list, then click the "OK".

4. If you can see following message window, then click the "Continue Anyway" button.
Then click "OK". (Microsoft® Windows® XP/2000 Operating System)

This monitor driver is under certified MS logo and this installation doesn't
damage your system. The certified driver will be posted on Samsung
Monitor homepage.
http://www.samsung.com/.
5. Monitor driver installation is completed.

Installing the Monitor Driver(Manual)

Windows XP | Windows 2000 | Windows Me | Windows NT | Linux
When prompted by the operating system for the monitor driver, insert the CD-ROM
included with this monitor. Driver installation is slightly different from one operating

system to another. Follow the directions appropriate for the operating system you
have.
Prepare a blank disk and download the driver program file at the Internet web site shown
here.
z

Internet web site :

http://www.samsung.com/ (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor (Korea)
http://www.samsungmonitor.com.cn/ (China)

Microsoft® Windows® XP Operating System

1. Insert CD into the CD-ROM driver.
2. Click "Start" —> "Control Panel" then click the "Appearance and Themes" icon.

3. Click "Display" icon and choose the "Settings" tab then click "Advanced..".

4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.

5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button.

6. Select "Don't search ,I will.." then click "Next" and then click "Have disk".

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the
model list and click the "Next" button.

8. If you can see following message window, then click the "Continue Anyway" button. Then
click "OK" button.

10. Monitor driver installation is completed.
Microsoft® Windows® 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2. Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install
1.
2.
3.
4.

5.
6.
7.
8.
9.
10.

Click "Start" , "Setting" , "Control Panel".
Double click the "Display" Icon.
Choose the "Settings" tab and then click "Advanced..".
Choose "Monitor".
Case1: If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2: If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
Click "Driver" and then click on "Update Driver.." then click on the "Next" button.
Choose "Display a list of the known drivers for this device so that I can choose a
specific driver" then click "Next" and then click "Have disk".
Click the "Browse" button then choose A:(D:\Driver).
Click the "Open" button, then click "OK" button.
Choose your monitor model and click the "Next" button then click "Next" button.
Click the "Finish" button then the "Close" button.
If you can see the "Digital Signature Not Found" window then click the "Yes"button.
And click the "Finish" button then the "Close" button.

Microsoft® Windows® Millennium Operating System
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Click "Start" , "Setting" , "Control Panel".
Double click "Display" icon.
Select the "Settings" tab and click "Advanced Properties" button.
Select the "Monitor" tab.
Click the "Change" button in the "Monitor Type" area.
Choose "Specify the location of the driver".
Choose "Display a list of all the driver in a specific location.." then click "Next" button.
Click the "Have Disk" button
Specify A:\(D:\driver) then click "OK" button.
Select "Show all devices" and choose the monitor that corresponds to the one you
connected to your computer and click "OK".
11. Continue choosing "Close" button and "OK" button until you close the Display Properties
dialogue box.

Microsoft® Windows® NT Operating System
1. Click Start, Settings, Control Panel, and then double-click Display icon.
2. In Display Registration Information window, click Settings Tab and then click All Display
Modes.
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click OK.
4. Click Apply button if you see the screen working normally after clicking Test. If the screen is
not normal, change to a different mode (lower mode of resolution, colors or frequency).
If there is no Mode at All Display Modes, select the level of resolution and vertical
frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.
1.
2.
3.
4.
5.
6.
7.

Press Enter at the first and the second screen after executing the X86Config file.
The third screen is for setting your mouse.
Set a mouse for your computer.
The next screen is for selecting a keyboard.
Set a Keyboard for your computer.
The next screen is for setting your monitor.
First of all, set a horizontal frequency for your monitor. (You can enter the frequency
directly.)
8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)
9. Enter the model name of your monitor. This information will not affect the actual execution
of X-Window.
10. You have finished setting up your monitor.
Execute X-Window after setting other requested hardware.

Natural Color
Natural Color Software Program

One of the recent problems in using a computer is that the color of the images printed out by a
printer or other images scanned by a scanner or a digital camera are not the same as those
shown on the monitor.
The Natural Color S/W is the very solution for this problem. It is a color administration system
developed by Samsung Electronics in association with Korea Electronics &
Telecommunications Research Institute (ETRI).
This is only available for Samsung monitors and ensures that the color of the images on the

monitor are the same as the printed or scanned images.
For more information, refer to Help (F1) in the software program.
Installing the Natural Color Software
Insert the CD included with the Samsung monitor into the CD-ROM Drive. The initial Natural
Color screen will appear. Click on Natural Color in the startup window to install the Natural
Color software.
To install the program manually, insert the CD included with the Samsung monitor into the CDROM Drive, click the Windows [Start] button, select select [Execute].
Enter D:\color\NCProSetup.exe and then press the key.
(If the drive where the CD is inserted is not D:\, enter the applicable drive.)
Uninstalling the Natural Color Software Program
Select [Settings]/[Control Panel] from the [Start] menu and then double-click [Add/Delete a
program].
Select Natural Color from the list and then click the [Add/Delete] button.

SyncMaster 591S/591V/591SG/594MG

User Control Buttons

Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
These buttons allow you to highlight and adjust items in the menu.
Use to select the OSD menu.

Direct-Access Features
Brightness

Description
When OSD is not on the screen, push the button to adjust brightness.

Contrast

Description
When OSD is not on the screen, push the button to adjust Contrast.

OSD Functions
Select an icon that you want to know from the OSD menu to display a text or animation
explanation of that icon.

Description
You can use the on-screen menus to change the brightness
according to personal preference.
You can use the on-screen menus to change the contrast
according to personal preference.
A "Moiré" pattern can appear on your screen, looking like a
series of concentric circles or arcs. To eliminate this pattern,
use the horizontal moire adjustments.
A "Moirë" pattern can appear on your screen, looking like a
series of concentric circles or arcs. To eliminate this pattern,
use the vertical moire adjustments.
The Degauss feature will remove color impurities caused by
magnetic fields.
Use the recall feature to reset these monitor settings to their
original levels: Position, Size, Pincushion, Trapezoid,
Parallelogram, Pinbalance, Rotation, H-Moire,and V-Moire.
Note: If you have selected "Yes", all settings listed above will
be reset. All other settings will remain the same.

Play/Stop

Description

Play/Stop

Color temperature is a measure of the 'warmth' of the image
colors. (6500K / 9300K)
Use to adjust the monitor color setting.(Red)
Use to adjust the monitor color setting.(Green)
Use to adjust the monitor color setting.(Blue)
Standard Red Green Blue (sRGB) is a defined default color
space. If a monitor, printer and scanner are all calibrated to
the sRGB color characteristics, then you can find color
matching from each peripheral.
Note:When the monitor is in the sRGB mode, Brightness /
Contrast adjustment is not available.

Description
Follow these instructions to change the horizontal position of
the monitor's entire display.
Follow these instructions to change the vetical position of the

Play/Stop

monitor's entire display.
Follow these instructions to change the horizontal size of the
monitor's entire display.
Follow these instructions to change the vertical size of the
monitor's entire display.
Adjust the pincushion setting when the sides of the display
are bowed in or bowed out.
Adjust the pinbalance setting when the sides of the display
are bowed towards the left or right.
Adjust the trapezoid setting when the top or bottom of the
display is too large or small.
Adjust the parallelogram setting when the display is leaning
left or right.

Provides information about the display timing and sync signals polarity(user mode).
These screens do not allow any changes to the settings, they are for information only.

SyncMaster 592V

User Control Buttons

Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
These buttons allow you to highlight and adjust items in the menu.
Use to select the OSD menu.

Direct-Access Features
Brightness

Description
When OSD is not on the screen, push the button to adjust brightness.

Contrast

Description
When OSD is not on the screen, push the button to adjust Contrast.

OSD Functions
Select an icon that you want to know from the OSD menu to display a text or animation
explanation of that icon.

Play/Stop

Description

Play/Stop

Description
Follow these instructions to change the horizontal position of
the monitor's entire display.
Follow these instructions to change the vetical position of the

Play/Stop

Provides information about the display timing and sync signals polarity(user mode).
These screens do not allow any changes to the settings, they are for information only.

SyncMaster 793S/793V/793SG/794MG/
783DF/793DF/793MG

User Control Buttons

Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
These buttons allow you to highlight and adjust items in the menu.
Use to select the OSD menu.

Direct-Access Features
Brightness

Description
When OSD is not on the screen, push the button to adjust brightness.

Contrast

Description
When OSD is not on the screen, push the button to adjust Contrast.

OSD Functions
Select an icon that you want to know from the OSD menu to display a text or animation
explanation of that icon.

Play/Stop

Description

Play/Stop

Description
Follow these instructions to change the horizontal position of
the monitor's entire display.
Follow these instructions to change the vetical position of the

Play/Stop

Provides information about the display timing and sync signals polarity(user mode).
These screens do not allow any changes to the settings, they are for information only.

SyncMaster 794V/788DF Plus

User Control Buttons

Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.
These buttons allow you to highlight and adjust items in the menu.
Use to select the OSD menu.

Direct-Access Features
Brightness

Description
When OSD is not on the screen, push the button to adjust brightness.

Contrast

Description
When OSD is not on the screen, push the button to adjust Contrast.

OSD Functions
Select an icon that you want to know from the OSD menu to display a text or animation
explanation of that icon.

Play/Stop

Description

Play/Stop

Description
Follow these instructions to change the horizontal position of
the monitor's entire display.
Follow these instructions to change the vetical position of the

Play/Stop

Provides information about the display timing and sync signals polarity(user mode).
These screens do not allow any changes to the settings, they are for information only.

Installation
1.

Insert the installation CD into the CD-ROM drive.

Click the MagicTune™ installation file.

Select installation Language, Click "Next".

When the Installation Shield Wizard window appears, click "Next."

Select "I agree to the terms of the license agreement" to accept the terms of use.

Choose a folder to install the MagicTune™ program.

Click "Install."

The "Installation Status" window appears.

Click "Finish."

10.

When the installation is complete, the MagicTune™ executable icon appears on your desktop.
Double-click the icon to start the program.

MagicTune™ execution icon may not appear depending on specification of computer
system or monitor. If that happens, press F5 Key.

Installation Problems
The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network
environment.

System Requirements
OS
z
z
z
z

Windows
Windows
Windows
Windows

2000
XP Home Edition
XP Professional
Vista™

It is recommended using MagicTune™ in Windows® 2000 or
later.

Hardware
z
z

32 MB Memory above
60 MB Hard disk space above

* For more information, visit the MagicTune™ website.

Uninstall

The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of the
Windows® Control Panel.
Perform the following steps remove MagicTune™ .
1.
2.
3.
4.
5.
6.

Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on
Windows® XP, go to [Control Panel] in the [Start] menu.
Click the "Add or Remove Programs" icon in Control Panel.
In the "Add or Remove Programs" screen, scroll down to find "MagicTune™ ." Click on it to highlight
it.
Click the "Change/Remove" button to remove the program.
Click "Yes" to begin the uninstall process.
Wait until the "Uninstall Complete" dialog box appears.

Visit the MagicTune™ website for technical support for MagicTune™ , FAQs (questions and answers) and
software upgrades.

Check List

Before calling for service, check the information in this section to see if you can remedy any
problems yourself. If you do need assistance, please call the phone number on the
Information section or contact your dealer.

Symptom
No images on the
screen. I cannot turn on
the monitor.

Check List

Solutions

Is the power cord
connected properly?

Check the power cord connection and
supply.

Can you see "
the screen?

Check the signal cable connection.

" on

If the power is on, reboot
the computer to see the
initial screen(the login
screen), which can be
seen.

If the initial screen (the login screen)
appears, boot the computer in the applicable
mode (the safe mode for Windows
ME/XP/2000) and then change the
frequency of the video card.
(Refer to the Preset Timing Modes)
Note: If the initial screen (the login screen)
does not appear, contact a service center or
your dealer.

Can you see "
the screen?

" on

You can see this message when the signal
from the video card exceeds the maximum
resolution and frequency that the monitor
can properly handle.
Adjust the maximum resolution and
frequency that the monitor can handle
properly.

The image on the screen
is shaking.

There is no image on the
screen.
Is the power indicator on
the monitor blinking at 1
second intervals?

The monitor is in PowerSaver mode.

Check the monitor
configuration to see if it
is in Interlace Mode.
(Interlace Mode: Vertical
frequency 43 Hz, 87 Hz
(i), etc)

Change the vertical frequency to NonInterlace mode by referring to the video card
manual.

Press any key on the keyboard to activate
the monitor and restore the image on the
screen.

Are there any magnetic
products such as a
power adapter, speaker
or a high voltage wire
near by?

Move the monitor away from anything that
can create a strong magnetic field.

Is the voltage stable?

The screen image can appear to shake or
vibrate at a particular time of day due to low
supply voltage.

The screen image can also appear to shake or vibrate if there is a
problem with the video card or the computer's main board.
The screen shows
strange colors or just
black and white.

The screen suddenly has
become unbalanced.

Is the screen displaying
only one color as if
looking at the screen
through a cellophane
paper?

Check the signal cable connection.

Have the screen colors
become strange after
running a program or
due to a crash between
applications?

Reboot the computer.

Has the video card been
set properly?

Set the video card by referring to the video
card manual.

Have you changed the
video card or the driver?

Adjust screen image position and size using
the OSD.

Have you adjusted the
resolution or frequency
on the monitor?

Adjust the resolution and frequency of the
video card.
(Refer to the Preset Timing Modes).

Make sure the video card is fully inserted in
it's slot.

The screen can be unbalanced due to the cycle of the video card
signals. Readjust Position by referring to the OSD.
The screen is out of
focus or OSD cannot be
adjusted.

Have you adjusted the
resolution or frequency
on the monitor?

Adjust the resolution and frequency of the
video card.
(Refer to the Preset Timing Modes).

The screen is partially
distorted.

Are there any magnetic
products such as an
adapter, speaker or a
high voltage wire near
the monitor?

Enter the OSD and perform a "Degauss".

Is the frequency properly
adjusted when checking
the Display Timing on
the menu?

Adjust the frequency properly by referring to
the video card manual and the Preset Timing
Modes.

LED is blinking but no
images on the screen.

Keep the monitor away from any magnetic
products.

(The maximum frequency per resolution may
differ from product to product.)
There are only 16 colors
shown on the screen.
The screen colors have
changed after changing
the video card.
There is a message that
reads "Unrecognized
monitor, Plug & Play
(VESA DDC) monitor
found".

Check when
MagicTune™ does not
function properly.

Have the Windows
Windows ME/2000/XP:
colors been set properly? Set the colors properly at the Control Panel
→ Display → Settings.
Has the video card been
set properly?

Set the video card by referring to the video
card manual.

Have you installed the
monitor driver?

Install the monitor driver according to the
Driver Installation Instructions.

See the video card
manual to see if the Plug
& Play (VESA DDC)
function can be
supported.

Install the monitor driver according to the
Driver Installation Instructions.

MagicTune™ feature is
found only on PC (VGA)
with Window OS that
supports Plug and Play.

* To check whether your PC is available for
MagicTune™ feature, follow the
steps below (When Windows is XP);

Control Panel → Performance and
Maintenance → System → Hardware →
Device Manager → Monitors → After
deleting Plug and Play monitor, find 'Plug
and Play monitor' by searching new
Hardware.
MagicTune™ is an additional software for
the monitor. Some graphic cards may not
support your monitor. When you have a
problem with the graphic card, visit our
website to check the compatible graphic
card list provided.
http://www.samsung.com/monitor/magictune
MagicTune™ doesn't
work properly.

Have you changed your
PC or video graphic
card?

Download the latest program. The program
can be downloaded
http://www.samsung.com/monitor/magictune.

Did you install the
program?

Reboot the computer after installing the
program for the first time. If a copy of the
program is already installed, remove it,
reboot the computer, and then install the
program again. You need to reboot the
computer for it to operate normally after
installing or removing the program.

Visit the MagicTune™ website and download the installation software for MagicTune™
MAC.

Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an after-service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed adapter (video)
driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set at 50Hz ~ 160Hz .
(Do not exceed 65Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter at the "Control Panel→System→Device Administrator" and then
reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q&A

Question

Answer

How can I change the
frequency?

Frequency can be changed by reconfiguring the video card.

How can I adjust the resolution?

Windows ME/XP/2000 : Set the resolution at the Control
Panel→Display→Settings.

Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)

* Contact the video card manufacturer for details.
How can I set the Power Saving
function?

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
computer or the screen saver. (Refer to Windows/Computer
Manual).

The monitor makes a sound
when it is turned on.

This is normal as some sound may be generated when the metal
case and the electromagnet, which are installed to block any
electromagnetic waves, interact with each other.

How can I clean the outer
case/Picture tube?

Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the case.
Do not allow any water to go inside the monitor.

Self-Test Feature Check
Self-Test Feature Check | Warning Messages | Environment | Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.
Self-Test Feature Check
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
If the monitor is functioning properly, you will see a box in the illustration below.

This box appears during normal operation if the video cable becomes disconnected or
damaged.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.

Warning Messages
If there is something wrong with the input signal, the message below appears on the screen
or the screen goes blank although the power indicator LED is still on. The message may
indicate that the monitor is out of scan range or that you need to check the signal cable.

Environment
The location and the position of the monitor may influence the quality and other
features of the monitor.
1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer
to another room.
2. Remove all electronic devices such as radios, fans, clocks and telephones that are
within 3 feet (one meter) of the monitor.

3. Degauss the monitor if any devices were removed from the area.
Useful Tips
z

A monitor recreates visual signals received from the computer. Therefore, if there is trouble with
the computer or the video card, this can cause the monitor to become blank, have poor coloring,
noise, unavailable video mode, etc. In this case, first check the source of the problem, and then
contact a service center or your dealer.
Judging the monitor's working condition
If there is no image on the screen or a "
" message comes up, disconnect the cable from the
computer while the monitor is still powered on.
{

{

If there is a message coming up on the screen or if the screen goes white, this means the
monitor is in working condition.
In this case, check the computer for trouble.

General
General
Model Name

SyncMaster 591S/591V/591SG/594MG

Picture Tube
Type

15" (38 cm) FST (35 cm viewable)

Deflection angle

90 °

Dot Pitch

0.24 mm (Horizontal)

Resolution
Optimum resolution

800 x 600 @ 85 Hz

Maximum resolution

1024 x 768 @ 70 Hz

Active Display
Horizontal

267 ± 4 mm

Vertical

200 ± 4 mm

Synchronization
Horizontal

30 ~ 55 kHz

Vertical

50 ~ 120 Hz

Input Signal Definition
Video Signal

RGB, Analog 0.7 Vp-p Positive at 75 Ω

Sync Signal

Separate H/V sync, TTL level, positive or negative

Display Color
Unlimited
Maximum Pixel Clock
65 MHz
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz
Dimensions (WxDxH)
361 x 379.2 x 347 mm / 14.2 x 14.9 x 13.7 inch (After installation of Stand)

Weight
11.0 kg / 24.3 lbs
Environmental considerations
Operating

Temperature 32°F ~ 104°F(0°C ~ 40°C)
Humidity 10% ~ 80%, non-condensing

Storage

Temperature -4°F ~113°F (-20°C ~ 45°C)
Humidity 5% ~ 95%, non-condensing

Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor
and the computer systems will provide the best operating conditions and monitor settings. In most
cases, the monitor installation will proceed automatically, unless the user wishes to select alternate
settings.
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can
be used in all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in
your computer. Use the software utility installed on your computer to set up this feature.
State

Normal Operation

Power-off mode

Power Indicator

Green

Green, Blinking

Power Consumption

Less than 50 W (at the windows pattern)

Less than 1 W

Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.

Display Mode

Horizontal
Frequency
(kHz)

Vertical
Frequency
(Hz)

Pixel Clock
(MHz)

Sync Polarity
(H/V)

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 640 x 480

43.300

85.000

36.000

-/-

VESA, 800 x 600

53.700

85.100

56.250

+/+

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of
the screen horizontally is called the Horizontal Cycle and the inverse
number of the Horizontal Cycle is called the Horizontal Frequency.
Unit: kHz
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image
many times per second to display an image to the user. The
frequency of this repetition is called the Vertical Frequency or Refresh
Rate. Unit: Hz

General
General
Model Name

SyncMaster 592V

Picture Tube
Type

15" (38 cm) FST (35 cm viewable)

Deflection angle

90 °

Dot Pitch

0.24 mm (Horizontal)

Resolution
Optimum resolution

800 x 600 @ 85 Hz

Maximum resolution

1024 x 768 @ 70 Hz

Active Display
Horizontal

267 ± 4 mm

Vertical

200 ± 4 mm

Synchronization
Horizontal

30 ~ 55 kHz

Vertical

50 ~ 120 Hz

Input Signal Definition
Video Signal

RGB, Analog 0.7 Vp-p Positive at 75 Ω

Sync Signal

Separate H/V sync, TTL level, positive or negative

Display Color
Unlimited
Maximum Pixel Clock
65 MHz
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz
Dimensions (WxDxH)
361 x 376 x 346 mm / 14.2 x 14.8 x 13.6 inch (After installation of Stand)

Weight
10.3 kg / 22.7 lbs
Environmental considerations
Operating

Temperature 32°F ~ 104°F(0°C ~ 40°C)
Humidity 10% ~ 80%, non-condensing

Storage

Temperature -4°F ~113°F (-20°C ~ 45°C)
Humidity 5% ~ 95%, non-condensing

Normal Operation

Power-off mode

Power Indicator

Green

Green, Blinking

Power Consumption

Less than 50 W (at the windows pattern)

Less than 1 W

Display Mode

Horizontal
Frequency
(kHz)

Vertical
Frequency
(Hz)

Pixel Clock
(MHz)

Sync Polarity
(H/V)

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 640 x 480

43.300

85.000

36.000

-/-

VESA, 800 x 600

53.700

85.100

56.250

+/+

Horizontal Frequency

General
General
Model Name

SyncMaster 793S/793V/793SG/794MG

Picture Tube
Type

17" (43 cm) FSE (40.6 cm viewable)

Deflection angle

90 °

Dot Pitch

0.23 mm (Horizontal)

Resolution
Optimum resolution

1024 x 768 @ 85 Hz

Maximum resolution

1280 x 1024 @ 65 Hz

Active Display
Horizontal

312 ± 4 mm

Vertical

234 ± 4 mm

Synchronization
Horizontal

30 ~ 70 kHz

Vertical

50 ~ 160 Hz

Input Signal Definition
Video Signal

RGB, Analog 0.7 Vp-p Positive at 75 Ω

Sync Signal

Separate H/V sync, TTL level, positive or negative

Display Color
Unlimited
Maximum Pixel Clock
110 MHz
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz
Dimensions (WxDxH)
401 x 410 x 378 mm / 15.8 x 16.1 x 14.9 inch (After installation of Stand)

Weight
13.8 kg / 30.4 lbs
Environmental considerations
Operating

Temperature 32°F ~ 104°F(0°C ~ 40°C)
Humidity 10% ~ 80%, non-condensing

Storage

Temperature -4°F ~113°F (-20°C ~ 45°C)
Humidity 5% ~ 95%, non-condensing

Normal Operation

Power-off mode

Power Indicator

Green

Green, Blinking

Power Consumption

Less than 55 W (at the windows pattern)

Less than 1 W

Display Mode

Horizontal
Frequency
(kHz)

Vertical
Frequency
(Hz)

Pixel Clock
(MHz)

Sync Polarity
(H/V)

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 800 x 600

53.700

85.100

56.250

+/+

VESA, 1024 x 768

68.700

85.000

94.500

+/+

Horizontal Frequency

General
General
Model Name

SyncMaster 794V

Picture Tube
Type

17" (43 cm) FSE (40.6 cm viewable)

Deflection angle

90 °

Dot Pitch

0.23 mm (Horizontal)

Resolution
Optimum resolution

1024 x 768 @ 85 Hz

Maximum resolution

1280 x 1024 @ 65 Hz

Active Display
Horizontal

312 ± 4 mm

Vertical

234 ± 4 mm

Synchronization
Horizontal

30 ~ 70 kHz

Vertical

50 ~ 160 Hz

Input Signal Definition
Video Signal

RGB, Analog 0.7 Vp-p Positive at 75 Ω

Sync Signal

Separate H/V sync, TTL level, positive or negative

Display Color
Unlimited
Maximum Pixel Clock
110 MHz
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz
Dimensions (WxDxH)
401 x 410 x 378 mm / 15.8 x 16.1 x 14.9 inch (After installation of Stand)

Weight
12.8 kg / 28.2 lbs
Environmental considerations
Operating

Temperature 32°F ~ 104°F(0°C ~ 40°C)
Humidity 10% ~ 80%, non-condensing

Storage

Temperature -4°F ~113°F (-20°C ~ 45°C)
Humidity 5% ~ 95%, non-condensing

Normal Operation

Power-off mode

Power Indicator

Green

Green, Blinking

Power Consumption

Less than 55 W (at the windows pattern)

Less than 1 W

Display Mode

Horizontal
Frequency
(kHz)

Vertical
Frequency
(Hz)

Pixel Clock
(MHz)

Sync Polarity
(H/V)

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 800 x 600

53.700

85.100

56.250

+/+

VESA, 1024 x 768

68.700

85.000

94.500

+/+

Horizontal Frequency

General
General
Model Name

SyncMaster 783DF/793DF/793MG/788DF Plus

Picture Tube
Type

17" (43 cm) Flat (40.6 cm viewable)

Deflection angle

90 °

Dot Pitch

0.20 mm (Horizontal)

Resolution
Optimum resolution

1024 x 768 @ 85 Hz

Maximum resolution

1280 x 1024 @ 65 Hz

Active Display
Horizontal

312 ± 4 mm

Vertical

234 ± 4 mm

Synchronization
Horizontal

30 ~ 70 kHz

Vertical

50 ~ 160 Hz

Input Signal Definition
Video Signal

RGB, Analog 0.7 Vp-p Positive at 75 Ω

Sync Signal

Separate H/V sync, TTL level, positive or negative

Display Color
Unlimited
Maximum Pixel Clock
110 MHz
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz
Dimensions (WxDxH)
401 x 410 x 378 mm / 15.8 x 16.1 x 14.9 inch (After installation of Stand)

Weight
14.3 kg / 31.5 lbs
Environmental considerations
Operating

Temperature 32°F ~ 104°F(0°C ~ 40°C)
Humidity 10% ~ 80%, non-condensing

Storage

Temperature -4°F ~113°F (-20°C ~ 45°C)
Humidity 5% ~ 95%, non-condensing

Normal Operation

Power-off mode

Power Indicator

Green

Green, Blinking

Power Consumption

Less than 55 W (at the windows pattern)

Less than 1 W

Display Mode

Horizontal
Frequency
(kHz)

Vertical
Frequency
(Hz)

Pixel Clock
(MHz)

Sync Polarity
(H/V)

VESA, 640 x 480

37.500

75.000

31.500

-/-

VESA, 800 x 600

53.700

85.100

56.250

+/+

VESA, 1024 x 768

68.700

85.000

94.500

+/+

Horizontal Frequency

SyncMaster 591V/591S/592V/793V/794V/793DF/793S/783DF

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.

North America
U.S.A

1-800-SAMSUNG (7267864)

http://www.samsung.com

CANADA

1-800-SAMSUNG (7267864)

http://www.samsung.com/ca

MEXICO

01-800-SAMSUNG (7267864)

http://www.samsung.com/mx

Latin America
ARGENTINE

0800-333-3733

http://www.samsung.com/ar

BRAZIL

4004-0000

http://www.samsung.com/br

CHILE

800-726-7864 (SAMSUNG)

http://www.samsung.com/cl

COLOMBIA

01-8000112112

http://www.samsung.com.co

COSTA RICA

0-800-507-7267

http://www.samsung.com/latin

ECUADOR

1-800-10-7267

http://www.samsung.com/latin

EL SALVADOR

800-6225

http://www.samsung.com/latin

GUATEMALA

1-800-299-0013

http://www.samsung.com/latin

JAMAICA

1-800-234-7267

http://www.samsung.com/latin

PANAMA

800-7267

http://www.samsung.com/latin

PUERTO RICO

1-800-682-3180

http://www.samsung.com/latin

REP. DOMINICA

1-800-751-2676

http://www.samsung.com/latin

TRINIDAD & TOBAGO

1-800-7267-864

http://www.samsung.com/latin

VENEZUELA

0-800-100-5303

http://www.samsung.com/latin

Europe
BELGIUM

02 201 2418

http://www.samsung.com/be

CZECH REPUBLIC

844 000 844

http://www.samsung.com/cz

DENMARK

70 70 19 70

http://www.samsung.com/dk

FINLAND

030-6227 515

http://www.samsung.com/fi

FRANCE

3260 SAMSUNG(7267864)
(€ 0,15/min)

http://www.samsung.com/fr

GERMANY

01805 - 121213 (€ 0,14/Min)

http://www.samsung.de

HUNGARY

06-80-SAMSUNG (7267864)

http://www.samsung.com/hu

ITALIA

800 SAMSUNG (7267864)

http://www.samsung.com/it

LUXEMBURG

0032 (0)2 201 24 18

http://www.samsung.lu

NETHERLANDS

0900 20 200 88 (€ 0,10/Min)

http://www.samsung.com/nl

NORWAY

815-56 480

http://www.samsung.com/no

POLAND

0 801 801 881

http://www.samsung.com/pl

PORTUGAL

80 8 200 128

http://www.samsung.com/pt

REPUBLIC OF IRELAND

0818 717 100

http://www.samsung.com/uk

SLOVAKIA

0800-SAMSUNG (7267864)

http://www.samsung.com/sk

SPAIN

902 10 11 30

http://www.samsung.com/es

SWEDEN

0771-400 200

http://www.samsung.com/se

SWITZERLAND

0800-7267864

http://www.samsung.com/ch

U.K

0870 SAMSUNG (7267864)

http://www.samsung.com/uk

CIS
ESTONIA

800-7267

http://www.samsung.ee

LATVIA

800-7267

http://www.samsung.com/lv

LITHUANIA

8-800-77777

http://www.samsung.lt

KAZAKHSTAN

8 800 080 1188

http://www.samsung.kz

RUSSIA

8-800-200-0400

http://www.samsung.ru

UKRAINE

8-800-502-0000

http://www.samsung.com/ur

UZBEKISTAN

140-1234

http://www.samsung.uz

Asia Pacific
AUSTRALIA

1300 362 603

http://www.samsung.com/au

CHINA

800-810-5858, 010- 6475 1880

http://www.samsung.com.cn

HONG KONG

3698-4698

http://www.samsung.com/hk

INDIA

3030 8282, 1800 1100 11

http://www.samsung.com/in

INDONESIA

0800-112-8888

http://www.samsung.com/id

JAPAN

0120-327-527

http://www.samsung.com/jp

MALAYSIA

1800-88-9999

http://www.samsung.com/my

PHILIPPINES

1800-10-SAMSUNG (7267864)

http://www.samsung.com/ph

SINGAPORE

1800-SAMSUNG (7267864)

http://www.samsung.com/sg

THAILAND

1800-29-3232, 02-689-3232

http://www.samsung.com/th

TAIWAN

0800-329-999

http://www.samsung.com/tw

VIETNAM

1 800 588 889

http://www.samsung.com/vn

Middle East & Africa
SOUTH AFRICA

0860 7267864 (SAMSUNG)

http://www.samsung.com/za

U.A.E

800SAMSUNG (7267864)
8000-4726

http://www.samsung.com/mea

Terms
Dot Pitch
The image on a monitor is composed of red, green and blue dots. The closer the dots, the
higher the resolution. The distance between two dots of the same color is called the 'Dot
Pitch'. Unit: mm
Vertical Frequency
The screen must be redrawn several times per second in order to create and display an image
for the user. The frequency of this repetition per second is called the Vertical Frequency or
Refresh Rate. Unit: Hz
Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally
is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal
Frequency. Unit: kHz
Interlace and Non-Interlace Methods
Showing the horizontal lines of the screen from the top to the bottom sequentially is called the
Non-Interlace method while showing odd lines and then even lines in turn is called the
Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a
clear image. The Interlace method is the same as that used in TVs.
Plug & Play
This is a function that provides the best quality screen for the user by allowing the computer
and the monitor to exchange information automatically. This monitor follows the international
standard VESA DDC for the Plug & Play function.
Resolution
The number of horizontal and vertical dots used to compose the screen image is called the
'resolution'. This number shows the accuracy of the display. A high resolution is good for
performing multiple tasks as more image information can be shown on the screen.
Example: If the resolution is 1024 X 768, this means the screen is composed of 1024
horizontal dots (horizontal resolution) and 768 vertical lines (vertical resolution).

Reproduction in any manner whatsoever without the written permission of Samsung Electronics
Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and
Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are
registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and
logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). All other
product names mentioned herein may be the trademarks or registered trademarks of their
respective owners.

SyncMaster 591SG/594MG/794MG/793SG

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.

North America
U.S.A

1-800-SAMSUNG (7267864)

http://www.samsung.com

CANADA

1-800-SAMSUNG (7267864)

http://www.samsung.com/ca

MEXICO

01-800-SAMSUNG (7267864)

http://www.samsung.com/mx

Latin America
ARGENTINE

0800-333-3733

http://www.samsung.com/ar

BRAZIL

4004-0000

http://www.samsung.com/br

CHILE

800-726-7864 (SAMSUNG)

http://www.samsung.com/cl

COLOMBIA

01-8000112112

http://www.samsung.com.co

COSTA RICA

0-800-507-7267

http://www.samsung.com/latin

ECUADOR

1-800-10-7267

http://www.samsung.com/latin

EL SALVADOR

800-6225

http://www.samsung.com/latin

GUATEMALA

1-800-299-0013

http://www.samsung.com/latin

JAMAICA

1-800-234-7267

http://www.samsung.com/latin

PANAMA

800-7267

http://www.samsung.com/latin

PUERTO RICO

1-800-682-3180

http://www.samsung.com/latin

REP. DOMINICA

1-800-751-2676

http://www.samsung.com/latin

TRINIDAD & TOBAGO

1-800-7267-864

http://www.samsung.com/latin

VENEZUELA

0-800-100-5303

http://www.samsung.com/latin

Europe
BELGIUM

02 201 2418

http://www.samsung.com/be

CZECH REPUBLIC

844 000 844

http://www.samsung.com/cz

DENMARK

70 70 19 70

http://www.samsung.com/dk

FINLAND

030-6227 515

http://www.samsung.com/fi

FRANCE

3260 SAMSUNG(7267864)
(€ 0,15/min)

http://www.samsung.com/fr

GERMANY

01805 - 121213 (€ 0,14/Min)

http://www.samsung.de

HUNGARY

06-80-SAMSUNG (7267864)

http://www.samsung.com/hu

ITALIA

800 SAMSUNG (7267864)

http://www.samsung.com/it

LUXEMBURG

0032 (0)2 201 24 18

http://www.samsung.lu

NETHERLANDS

0900 20 200 88 (€ 0,10/Min)

http://www.samsung.com/nl

NORWAY

815-56 480

http://www.samsung.com/no

POLAND

0 801 801 881

http://www.samsung.com/pl

PORTUGAL

80 8 200 128

http://www.samsung.com/pt

REPUBLIC OF IRELAND

0818 717 100

http://www.samsung.com/uk

SLOVAKIA

0800-SAMSUNG (7267864)

http://www.samsung.com/sk

SPAIN

902 10 11 30

http://www.samsung.com/es

SWEDEN

0771-400 200

http://www.samsung.com/se

SWITZERLAND

0800-7267864

http://www.samsung.com/ch

U.K

0870 SAMSUNG (7267864)

http://www.samsung.com/uk

CIS
ESTONIA

800-7267

http://www.samsung.ee

LATVIA

800-7267

http://www.samsung.com/lv

LITHUANIA

8-800-77777

http://www.samsung.lt

KAZAKHSTAN

8 800 080 1188

http://www.samsung.kz

RUSSIA

8-800-200-0400

http://www.samsung.ru

UKRAINE

8-800-502-0000

http://www.samsung.com/ur

UZBEKISTAN

140-1234

http://www.samsung.uz

Asia Pacific
AUSTRALIA

1300 362 603

http://www.samsung.com/au

CHINA

800-810-5858, 010- 6475 1880

http://www.samsung.com.cn

HONG KONG

3698-4698

http://www.samsung.com/hk

INDIA

3030 8282, 1800 1100 11

http://www.samsung.com/in

INDONESIA

0800-112-8888

http://www.samsung.com/id

JAPAN

0120-327-527

http://www.samsung.com/jp

MALAYSIA

1800-88-9999

http://www.samsung.com/my

PHILIPPINES

1800-10-SAMSUNG (7267864)

http://www.samsung.com/ph

SINGAPORE

1800-SAMSUNG (7267864)

http://www.samsung.com/sg

THAILAND

1800-29-3232, 02-689-3232

http://www.samsung.com/th

TAIWAN

0800-329-999

http://www.samsung.com/tw

VIETNAM

1 800 588 889

http://www.samsung.com/vn

Middle East & Africa
SOUTH AFRICA

0860 7267864 (SAMSUNG)

http://www.samsung.com/za

U.A.E

800SAMSUNG (7267864)
8000-4726

http://www.samsung.com/mea

Authority
Information in this document is subject to change without notice.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics
Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or
consequential damages in connection with the furnishing, performance, or use of this material.
Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and
Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are
registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and
logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). All other
product names mentioned herein may be the trademarks or registered trademarks of their
respective owners.

SyncMaster 793MG/788DF Plus

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care center.

North America
U.S.A

1-800-SAMSUNG (7267864)

http://www.samsung.com

CANADA

1-800-SAMSUNG (7267864)

http://www.samsung.com/ca

MEXICO

01-800-SAMSUNG (7267864)

http://www.samsung.com/mx

Latin America
ARGENTINE

0800-333-3733

http://www.samsung.com/ar

BRAZIL

4004-0000

http://www.samsung.com/br

CHILE

800-726-7864 (SAMSUNG)

http://www.samsung.com/cl

COLOMBIA

01-8000112112

http://www.samsung.com.co

COSTA RICA

0-800-507-7267

http://www.samsung.com/latin

ECUADOR

1-800-10-7267

http://www.samsung.com/latin

EL SALVADOR

800-6225

http://www.samsung.com/latin

GUATEMALA

1-800-299-0013

http://www.samsung.com/latin

JAMAICA

1-800-234-7267

http://www.samsung.com/latin

PANAMA

800-7267

http://www.samsung.com/latin

PUERTO RICO

1-800-682-3180

http://www.samsung.com/latin

REP. DOMINICA

1-800-751-2676

http://www.samsung.com/latin

TRINIDAD & TOBAGO

1-800-7267-864

http://www.samsung.com/latin

VENEZUELA

0-800-100-5303

http://www.samsung.com/latin

Europe
BELGIUM

02 201 2418

http://www.samsung.com/be

CZECH REPUBLIC

844 000 844

http://www.samsung.com/cz

DENMARK

70 70 19 70

http://www.samsung.com/dk

FINLAND

030-6227 515

http://www.samsung.com/fi

FRANCE

3260 SAMSUNG(7267864)
(€ 0,15/min)

http://www.samsung.com/fr

GERMANY

01805 - 121213 (€ 0,14/Min)

http://www.samsung.de

HUNGARY

06-80-SAMSUNG (7267864)

http://www.samsung.com/hu

ITALIA

800 SAMSUNG (7267864)

http://www.samsung.com/it

LUXEMBURG

0032 (0)2 201 24 18

http://www.samsung.lu

NETHERLANDS

0900 20 200 88 (€ 0,10/Min)

http://www.samsung.com/nl

NORWAY

815-56 480

http://www.samsung.com/no

POLAND

0 801 801 881

http://www.samsung.com/pl

PORTUGAL

80 8 200 128

http://www.samsung.com/pt

REPUBLIC OF IRELAND

0818 717 100

http://www.samsung.com/uk

SLOVAKIA

0800-SAMSUNG (7267864)

http://www.samsung.com/sk

SPAIN

902 10 11 30

http://www.samsung.com/es

SWEDEN

0771-400 200

http://www.samsung.com/se

SWITZERLAND

0800-7267864

http://www.samsung.com/ch

U.K

0870 SAMSUNG (7267864)

http://www.samsung.com/uk

CIS
ESTONIA

800-7267

http://www.samsung.ee

LATVIA

800-7267

http://www.samsung.com/lv

LITHUANIA

8-800-77777

http://www.samsung.lt

KAZAKHSTAN

8 800 080 1188

http://www.samsung.kz

RUSSIA

8-800-200-0400

http://www.samsung.ru

UKRAINE

8-800-502-0000

http://www.samsung.com/ur

UZBEKISTAN

140-1234

http://www.samsung.uz

Asia Pacific
AUSTRALIA

1300 362 603

http://www.samsung.com/au

CHINA

800-810-5858, 010- 6475 1880

http://www.samsung.com.cn

HONG KONG

3698-4698

http://www.samsung.com/hk

INDIA

3030 8282, 1800 1100 11

http://www.samsung.com/in

INDONESIA

0800-112-8888

http://www.samsung.com/id

JAPAN

0120-327-527

http://www.samsung.com/jp

MALAYSIA

1800-88-9999

http://www.samsung.com/my

PHILIPPINES

1800-10-SAMSUNG (7267864)

http://www.samsung.com/ph

SINGAPORE

1800-SAMSUNG (7267864)

http://www.samsung.com/sg

THAILAND

1800-29-3232, 02-689-3232

http://www.samsung.com/th

TAIWAN

0800-329-999

http://www.samsung.com/tw

VIETNAM

1 800 588 889

http://www.samsung.com/vn

Middle East & Africa
SOUTH AFRICA

0860 7267864 (SAMSUNG)

http://www.samsung.com/za

U.A.E

800SAMSUNG (7267864)
8000-4726

http://www.samsung.com/mea

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only

(Applicable in the European Union and other European countries with
separate collection systems)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2004:10:02 08:00:27Z
Modify Date                     : 2007:05:23 08:45:16+09:00
Page Mode                       : UseOutlines
Producer                        : Acrobat Distiller 5.0 (Windows)
Creation Date                   : 2004:10:02 08:00:27Z
Mod Date                        : 2007:05:23 08:45:16+09:00
Author                          : juju
Metadata Date                   : 2007:05:23 08:45:16+09:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:5823b6dc-1929-400a-ab28-f1062a04efb4
Instance ID                     : uuid:50116893-3faf-40e3-8ffe-a93927c5a6fe
Format                          : application/pdf
Creator                         : juju
Title                           : file://D:\Libra\BH59-00362S\verx0\manual\eng\03_htm\index.htm
Has XFA                         : No
Page Count                      : 82
Page Layout                     : OneColumn

EXIF Metadata provided by EXIF.tools

Samsung 591Sg Users Manual File

SyncMaster 794V 10246002

591SG 10254139

Navigation menu

Versions of this User Manual:

Views

Navigation