Samsung Renown Verizon Users Manual U810

SCH-U810 (Verizon Wireless) - User Manual verizon_wireless_u810_BH06_PM Free User Guide for Samsung SCH Series Mobile Phone, Manual - page6

2015-08-20

: Samsung Samsung-Renown-Verizon-Users-Manual-795303 samsung-renown-verizon-users-manual-795303 samsung pdf

Open the PDF directly: View PDF .
Page Count: 169 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Samsung Renown User Manual

Verizon Wireless

PORTABLE All Digital

MOBILE PHONE

User Manual

Please read this manual before operating your

phone, and keep it for future reference.

u810.book Page 1 Friday, May 1, 2009 12:03 PM

u810_BH06_PM_050109_with_SIM_F7_Rev 1.2

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to

the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to

Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited

to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation

and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you

agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or

otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All

applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), LLC

Headquarters: Customer Care Center:

1301 E. Lookout Drive 1000 Klein Rd.

Richardson, TX 75082 Plano, TX 75074

Toll Free Tel: 1.888.987.HELP (4357)

Internet Address: http://www.samsungusa.com

entities.

Do you have questions about your Samsung Mobile Phone?

For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:

www.samsungwireless.com/support

u810.book Page 2 Friday, May 1, 2009 12:03 PM

GH68-19277A

Printed in Korea.

ACCESS and NetFront are trademarks or registered trademarks of

ACCESS CO., LTD. in Japan and other countries.

RSA® is a registered Trademark RSA Security, Inc.

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE

PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER

WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY

PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE

WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE

REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION

MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE

PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF

THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

u810.book Page 3 Friday, May 1, 2009 12:03 PM

Table of Contents

Section 1: Getting Started .............................................4

Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4

Notes and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting Up Voicemail* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Section 2: Understanding Your Phone ...........................9

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Open View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 14

Inserting and Removing the microSD card . . . . . . . . . . . . . . . 17

Installing Your SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Section 3: Call Functions ............................................22

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Dialing Emergency Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Emergency Calls in GSM Mode . . . . . . . . . . . . . . . . . . . . . . . . 22

Placing GSM International Calls . . . . . . . . . . . . . . . . . . . . . . . 22

Assisted Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Call In-Progress Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Section 4: Menu Navigation ......................................... 37

Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Menu Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Section 5: Entering Text ............................................... 43

Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 43

Entering Text Using Word Mode . . . . . . . . . . . . . . . . . . . . . . . 43

Entering Upper and Lower Case . . . . . . . . . . . . . . . . . . . . . . . 44

Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Section 6: Understanding Your Contacts .................... 46

Opening Contacts Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Contacts Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Adding a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Adding Pauses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Contact Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 54

Deleting a Contact Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

My Name Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Finding My Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Emergency Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

u810.book Page 1 Friday, May 1, 2009 12:03 PM

Section 7: Messaging ..................................................60

Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Retrieving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Creating and Sending Text Messages . . . . . . . . . . . . . . . . . . . 60

Creating and Sending Picture Messages . . . . . . . . . . . . . . . . 62

Creating and Sending Video Messages . . . . . . . . . . . . . . . . . . 64

Creating and Sending Voice Messages . . . . . . . . . . . . . . . . . . 65

Receiving Picture Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Receiving Video Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Receiving Voice Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Changing Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Visual VoiceMail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Mobile IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Chat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Section 8: Changing Your Settings .............................. 83

My Verizon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

TTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

SIM Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Section 9: Media Center ............................................. 107

Media Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Media Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Picture & Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Mobile Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Browse & Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Section 10: Tools ........................................................ 125

Voice Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Notepad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Current Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Section 11: Dashboard with Mobile Web 2.0 ............ 134

Dashboard with Mobile Web 2.0 . . . . . . . . . . . . . . . . . . . . . 134

Accessing Mobile Web 2.0 through Dashboard . . . . . . . . . . 134

Exit Dashboard with Mobile Web 2.0 . . . . . . . . . . . . . . . . . . 134

Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Navigate the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Mobile Web Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

u810.book Page 2 Friday, May 1, 2009 12:03 PM

Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Place a Call While Using Dashboard with Mobile Web 2.0 . . . 137

Section 12: Health and Safety Information ...............138

Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 138

Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 139

UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Consumer Information on Wireless Phones . . . . . . . . . . . . . . 140

Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Using Your Phone Near Other Electronic Devices . . . . . . . . . 149

FCC Hearing-Aid Compatibility (HAC) Regulations

for Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 151

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 153

Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 154

Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 154

Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

Section 13: Warranty Information .............................157

Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Index ............................................................................161

u810.book Page 3 Friday, May 1, 2009 12:03 PM

Getting Started 4

Section 1: Getting Started

Understanding this User Manual

The chapters of this manual generally follow the same order as

the menus and sub-menus in your phone. A robust index for

quick reference to most features begins on page 161.

Also included is important safety information that you should

know before using your phone. Most of this information is near

the back of the guide, beginning on 138.

Notes and Tips

Throughout this guide are icons and text that are set apart from

the rest. These are intended to point out important information,

quick methods for activating features, to define terms, and more.

The definitions for these methods are as follows:

•

Notes

: Explain alternative options within the current feature, menu, or

sub-menu.

•

Tips

: Provide quick or innovative methods for performing functions

related to the subject at hand.

•

Important

: Points out important information about the current feature

that could affect performance, or even damage your phone.

This section allows you to start using your phone after activating

your service, setting up your voicemail, contacting customer

support, or getting an understanding of how this manual is put

together.

Using the Battery

Note:

This phone comes packaged with a partially charged rechargeable

standard Li-Ion battery and wall charger.

You must fully charge the battery before using your phone for the first

time. A fully discharged battery requires up to 4 hours of charge time.

Important!:

Although the phone can be used while the battery is charging,

the battery must be fully charged before first use, otherwise you

could damage the battery.

Warning!:

Use only the charger provided with the wireless device. Using a

charger other than the one included may damage your wireless

device or battery.

u810.book Page 4 Friday, May 1, 2009 12:03 PM

Battery Indicator

The battery indicator in the upper-right corner of the display

indicates battery power level. Four bars indicate a full charge,

while an empty icon indicates an almost empty battery. Two

to three minutes before the battery becomes too low to operate,

a blinking empty battery icon appears and a tone sounds. If

you continue to operate the phone without charging, it shuts

down.

Using A Non-Supported Battery

Samsung handsets do not support the use of a non-supported

battery.

When using a non-supported battery you will hear a series of

beeps and you will see a warning message that indicates “

NON-

SUPPORTED BATTERY. SEE USER MANUAL

” If you receive this

warning, battery charging has been disabled.

Samsung charging accessories (i.e. wall charger, and cigarette

lighter adapter) will only charge a Samsung approved battery.

To continue use of your handset press .

Note:

When using a non-supported battery the handset can only be used for

the duration of the life of the battery and cannot be recharged.

Important!:

Using a non-supported battery may cause damage to your

phone. Use a Samsung supported battery only.

Installing the Battery

1. Press down, and slide the battery cover back and lift up to

remove it.

u810.book Page 5 Friday, May 1, 2009 12:03 PM

Getting Started 6

2. Insert the top end of the battery into the phone housing

using the directional arrow printed on the battery. The gold

contacts at the battery end must align with contacts on the

phone. Push bottom end of the battery down until it snaps

into place.

3. Slide the battery cover up until it snaps into place.

Removing the Batter y

1. Press down, and slide the battery cover back and lift up to

remove it.

2. Lift the battery from the bottom end and remove.

u810.book Page 6 Friday, May 1, 2009 12:03 PM

3. Slide the battery cover up until it snaps into place.

Charging the Battery

Your phone is powered by a rechargeable standard Li-ion battery.

Only use Samsung-approved charging devices and batteries.

Samsung accessories are designed to maximize battery life.

Using other accessories may invalidate your warranty and may

cause damage.

Note:

The phone can be used while charging but will charge faster when

powered off.

Wall Charger

The wall charger is a convenient, light-weight charger that

rapidly charges your phone from any 120/ 220 VAC outlet.

1. Pull the connector cover out and turn to expose the

connector. Insert the wall charger adapter end with the

arrow up into the connector at the bottom of the phone.

2. Plug the wall charger into a standard AC wall outlet.

When the phone is completely charged (the battery icon becomes

still), unplug the adapter from the power outlet. Remove the

adapter end from the connector and replace the connector cover.

Incorrect

Correct

u810.book Page 7 Friday, May 1, 2009 12:03 PM

Getting Started 8

Turning Your Phone On and Off

Turning Your Phone On

1. Open the flip, then press and hold until phone turns

on.

Note:

As with any other radio-transmitting device, do not touch the internal

antenna as it affects call quality and may cause the phone to operate

at a higher power level than is necessary. The internal antenna is

located along the top on the back side of your phone.

2. Once the phone finds a signal, the time, date, and day

appear in the display.

3. You’re now ready to place and receive calls.

Note:

If the phone is outside the Verizon Wireless coverage area the roaming

icon appears in the top of the display.

Turning Your Phone Off

Press for two or more seconds. Your phone powers off.

Setting Up Voicemail*

Voicemail allows callers to leave voice messages.

Note:

Once your voicemail account has been set up, you can use the

voicemail selection 5 (under the Messaging menu) to view details of

voice messages in your voicemail box.

Voicemail Setup

1. Press and hold or

from your phone or dial your wireless phone number from

any touch-tone phone.

2. When the recorded announcement begins, press

to interrupt (if applicable). An easy-to-follow setup tutorial

will begin. Follow the instructions to set up your new

password and record a greeting.

Listening to Voicemail

1. Press and hold or .

2. You are then prompted to enter your password followed by

key. Follow recorded prompts to listen to

messages, change administrative options, etc.

*Airtime and long distance charges apply. IN Calling minutes do not apply to

Voicemail setup or retrievals.

u810.book Page 8 Friday, May 1, 2009 12:03 PM

Section 2: Understanding Your Phone

This section outlines key features of your phone as well as

screens and icons that display when the phone is in use.

Features of Your Phone

–

High Speed Data (EVDO 1x Technology (800/1900 mHz) + Quad Band

(850/900/1800/1900 mHz GSM + GPRS)

–

Global Positioning (GPS) Technology for VZ Navigator

–

V CAST Music | Rhapsody and Video Capable

–

Personal Organizer (Calculator, Calendar, Alarm Clock, Stop Watch,

World Clock, and Notepad)

–

Dedicated Touch Music Keys

–

Messaging Services (Standard and Enhanced TXT Messaging, Picture

Messaging, Video Messaging, Email Messaging, Voice Messaging,

Mobile Instant Messenger and Chat)

–

2.0 Megapixel Camera and Camcorder with Night Shot Mode

–

Advanced Speech Recognition

–

Speakerphone

–

microSD™ Memory Card Slot

–

Bluetooth

Wireless Technology **

**The Samsung Renown™ supports the following Bluetooth profiles: Headset,

Handsfree, Serial Port, Dial Up Networking, Object Push for vCard and vCalendar,

Phonebook Access, Bluetooth Stereo Support for Music and File Transfer for My

Sounds, My Pictures, and My Videos. The Renown™ does not support all Bluetooth

OBEX profiles. Go to www.verizonwireless.com/bluetoothchart to check vehicle/

accessory compatibility.

Closed View of Your Phone

The following illustration shows the main external features of

your phone. For explanation of features; see “Features (Closed

view)” on page 10.

u810.book Page 9 Friday, May 1, 2009 12:03 PM

Understanding Your Phone 10

Features (Closed view)

Hand Strap Holder

Allows you to attach a hand strap for

carrying the phone.

Speaker

: (located under battery cover) Music, Ringtones,

and Sounds are played through the speaker.

Power/Accessory Connector

: The power/accessory

interface connector is used to plug in the charging

accessories and also connect any available accessory

cables to your phone.

Volume key

: Allows you to adjust the master volume or

adjust the voice volume during a call. To mute the ringer

during an incoming call, press the volume key up or down.

Also press and hold the key, to activate Sound Off mode/

Normal mode.

Rewind key

: Music rewind key. Touch and hold to rewind

music. Tap to go to a previous song.

Play/Pause key

: Music play or pause key.

Camera Lens

: Allows you to take photos or record video.

Headset Jack

: Allows you to plug in an optional headset for

safe, convenient conversations.

SIM Card Slot

: (located under battery cover). Allows you to

insert a SIM card.

10.

microSD™ Memory Card Slot

: (located under battery cover).

Allows you to insert a microSD™ memory card to add

additional memory and storage capacity.

u810.book Page 10 Friday, May 1, 2009 12:03 PM

11.

External LCD

: External LCD shows signal and battery

strength, time, day, and date. It also displays incoming

calls or messages. Also displays partial information for VZ

Navigator when VZ Navigator is in use and the flip is

closed.

12.

Camera/Camcorder key

: Press to activate the camera or

press and hold to activate the camcorder.

13.

Hold Key:

Allows you to lock/unlock the music keys

(i.e.Rewind, Play/Pause, and Fast Forward) on the front of

the phone.

14.

Fast Forward key

: Music fast forward key. Press and hold

to fast forward music. Tap to go to the next song.

Open View of Your Phone

The following illustration shows the main features of the phone.

310

u810.book Page 11 Friday, May 1, 2009 12:03 PM

Understanding Your Phone 12

Features

Internal LCD

: Displays all the information needed to operate

your phone.

OK Key

: Pressing when navigating through a menu accepts

the highlighted choice in a menu, or performs an action in

an application.

Left Soft Key

: This key is used to navigate through menus

and applications by selecting the choice indicated on the

lower left area of the display screen.

Voice Recognition Key

: Press to activate voice recognition

feature.

Send Key

: Allows you to place or receive a call. From the

home screen, press the key once to access the recent call

log.

Voicemail Key

: Press and hold to call Voicemail.

Special Function Keys

: Enters special characters. Perform

various functions.

Earpiece

: The earpiece allows you to hear the other caller.

Directional Key

: This key allow you to scroll through the

phone menu options.

10.

Right Soft Key

: This key is used to navigate through menus

and applications by selecting the choice indicated on the

lower right area of the display screen.

11.

Speakerphone Key

: Press this key to enable/disable the

speakerphone option.

12.

End/Power Key

: Ends a call. Press and hold the END key, to

power On or Off. When you receive an incoming call, press

to send the call directly to voicemail.

13.

Clear Key

: Deletes numbers when dialing a phone number,

or characters from the display when you are in text entry

mode. Press to return to the previous menu or screen

when navigating features.

14.

Alphanumeric Keypad

: Use these keys to enter numbers,

letters, and characters.

15.

Microphone

: The Microphone allows the other caller to

hear you clearly when you are speaking to them.

Command Keys

Functions for the soft keys are defined by what appears above

each in the display. There are two soft keys, the left soft key

and the right soft key .

u810.book Page 12 Friday, May 1, 2009 12:03 PM

Left Soft Key

Some functions of the left soft key are as follows.

•

Press the

Message

eft) soft key to open the Message menu.

•

When the left soft key function is Settings, press the

Settings

eft) soft

key to view settings for the feature.

•

When the left soft key function is Edit, press the

Edit

(left) soft key

to edit a Contact or Profile setting.

Right Soft Key

Some functions of the right soft key are as follows.

•

Press the

Contacts

(right) soft key to open your Contacts list.

•

When the right soft key function is

Options

, press the

Options

(right)

soft key to view more options for the current menu.

Clear Key

The

CLR

key is used to erase or clear numbers, text, or

symbols from the display. You can also use to return to a

previous menu or to return to the home screen from any menu.

•

If you enter an incorrect character, briefly press to backspace

(and delete) the character.

•

To erase the previous word in a sentence, press and hold .

•

To back up one menu level, briefly press .

End Key

The

End

key is used to end a call, to turn your phone on/

off, to return to the home screen from any menu or cancel the

last input.

•

Press and hold the

End

key to turn your phone on or off.

•

Press to disconnect a call.

•

Press to return to the home screen from any menu, or to

cancel the last input.

•

Press to send an incoming call directly to Voicemail.

Send Key

The

Send

key is used to answer calls, dial calls, and to

recall the last number(s) dialed, received, or missed.

•

Press to answer calls.

•

Enter a number and press to make a call.

•

Press from the home screen to display a list of all calls to and

from your phone.

•

Press twice from the home screen to call the most recently

dialed, received, or missed number.

•

Press to pick up a waiting call. Press again to switch

back to the other call.

u810.book Page 13 Friday, May 1, 2009 12:03 PM

Understanding Your Phone 14

Directional Keys

Use the Directional keys (up, down, left, right) to browse menus,

sub-menus, and lists. Each key also acts as a shortcut to launch

applications. The Directional keys can be customized to launch

your favorite application. For more information, refer to “Set

Shortcuts” on page 94.

Speakerphone Key

With the flip open, press and hold the

Speakerphone

key to

switch from using the earpiece to the speakerphone before or

during a call. Use the volume keys (located on the left side of

your phone) to adjust the volume. Press and hold the

Speakerphone

key to enable and disable the speakerphone

option.

Camera/Camcorder Key

Press the

Camera

key (on the right side of the phone) to

activate the camera. Press and hold the Camera key to activate

the Camcorder. While in camera mode press the Camera key to

take a photo. While in camera mode press and hold the Camera

key to activate the Camcorder.

Hold key

Press

Hold

key on the right side of your phone to lock/

unlock the touch keypad(i.e. Rewind, Play/Pause, and

Fast Forward) on the front of the phone.

Note:

The music touch keys are only functional when the backlight is on.

Understanding the Display Screen

The top annunciator line of your

phone’s display contain icons that

indicate network status, battery

power, signal strength,

connection type and more.

The bottom area of the home

screen shows icons that indicate

feature and function status.

The following list contains icons that may appear in your display.

HOLD

u810.book Page 14 Friday, May 1, 2009 12:03 PM

Display icons

Airplane Mode

: Appears when Airplane Mode

is on. When on, all RF functions for your

phone are disabled, and you cannot use your

phone to place or receive calls.

Roaming

: Your phone is outside your home

area. While roaming, another wireless

provider may be handling your call. The

service rate for the call may be higher than

those made from within your home area.

Please refer to Verizon Wireless for roaming

rates.

EV signal strength

: Appears when your

phone is using the EVDO protocol. Appears

when your phone is on and indicates the

current signal strength. More bars indicate a

stronger signal.

1X signal strength

: Indicates your phone is

using the CDMA 1X protocol. Appears when

your phone is on and indicates the current

signal strength. More bars indicate a

stronger signal.

EV1X signal strength

: The EVDO/1X protocol

is capable of high-speed broadband data

(3G). Appears when your phone is on and

indicates the current signal strength. More

bars indicate a stronger signal.

D signal strength

: Appears when your phone

is receiving digital data. Appears when your

phone is on and indicates the current signal

strength. More bars indicate a stronger

signal.

GSM signal strength

: Appears when your

phone is using the GSM protocol. Appears

when your phone is on and indicates the

current signal strength. More bars indicate a

stronger signal.

GPRS signal strength

: Appears when your

phone is using the GPRS protocol. Appears

when your phone is on a GPRS data call and

indicates the current signal strength. More

bars indicate a stronger signal.

SSL

: Indicates the secure socket layer is

active transmits your communications over

the internet in an encrypted format.

GPRSGPRS

u810.book Page 15 Friday, May 1, 2009 12:03 PM

Understanding Your Phone 16

Voice Privacy

: Prevents eavesdropping over a

CDMA traffic channel.

Hold - Keys Locked

: Indicates that the

external music player keys are locked and

are not functional. Press and hold the HOLD

key to lock/unlock the external music player

keys.

No service

: Your phone cannot find a signal

because you’re outside a service area. You

cannot make or receive calls. Wait for a

signal or move to an open area to find a

signal. This indicator always appears when

you first turn on your phone and disappears

once service is located.

Voice Call

: Indicates a call in progress.

Data Call

: Indicates a data call in progress.

Dormant

: Indicates no incoming or outgoing

data.

E911

: Indicates Global Positioning Service

(GPS) for 911 is set to On for emergency calls

only.

Location On

: Global Positioning Service is set

to On for location and 911 calls.

Battery Level

: More bars indicate a greater

charge. When the battery is low, an empty

battery icon flashes and the phone sounds

an alert, which indicates your phone is about

to shut down.

TTY

: Indicates that TTY is enabled.

Bluetooth On

: Indicates that Bluetooth

wireless technology is turned on.

Bluetooth Connected

: Indicates Bluetooth

wireless technology is turned on and is

paired with another Bluetooth-enabled

device.

Bluetooth Active

: Indicates that Bluetooth

wireless technology is connected to another

device and receiving or pushing data.

Bottom Display Icons

All Sounds Off

: The ringer is silenced for all

alerts, incoming calls, and incoming

messages.

Alarm Only

: Your phone will only ring when

the set alarm sounds.

Vibrate Only

: Your phone vibrates upon

receiving a call.

u810.book Page 16 Friday, May 1, 2009 12:03 PM

Speakerphone

: Your phone switches to

speakerphone instead of earpiece.

Missed Calls

: Your phone displays this icon

when calls are missed.

New Msgs

: You’ve received a new text, page

or web alert message. You’re also notified of

a new message by animations and sound.

Calendar Event:

Your phone displays this icon

when you have a calendar event scheduled.

Voicemail

: You’ve received a voicemail

message, page or web alert message. You

have one or more unread voicemail

messages in your voicemail box. (Only

applicable on the Verizon Wireless Network.)

Alarm On

: Indicates that your phone has a set

alarm.

Auto Answer

: Automatic answer is enabled.

Your phone automatically picks up calls after

the designated time with the stereo headset

or when your Bluetooth headset or Bluetooth

hands-free car kit is connected.

Dialogue boxes

Dialogue boxes prompt for action, inform you of status, or warn

of situations such as low memory. Dialogue boxes and their

definitions are outlined below.

•

Choice

-Example: “SAVE MESSAGE?”

•

Reconfirm

-Example: “ERASE ALL MESSAGES?”

•

Performing

-Example: “SENDING...” “CONNECTING...”

•

Completed

-Example: “MESSAGE SENT”

•

Information

-Example: “NEW MESSAGE”

•

Error

-Example: “SYSTEM ERROR!”

•

Warning

-Example: “BATTERY LOW,” “MEMORY FULL!”

Inserting and Removing the microSD card

To add additional memory to your phone insert a microSD card

(sold separately) into the external memory slot, located in the

battery compartment of the phone. Use the following instructions

and illustrations for proper insertion and removal.

u810.book Page 17 Friday, May 1, 2009 12:03 PM

Understanding Your Phone 18

1. Press down to slide the battery cover back to remove.

2. Push the microSD card into the slot until it locks into place.

To remove the card:

1. Press in the microSD card to unlock and remove.

2. Slide the battery cover up until it snaps into place.

u810.book Page 18 Friday, May 1, 2009 12:03 PM

Installing Your SIM Card

Your wireless device comes with a SIM card installed which along

with a Global Feature on your account, enables you to make calls

and access email in GSM Networks while traveling overseas.

Should your SIM card be lost or damaged, please follow these

instructions for the installation of your new SIM.

Note:

If your SIM card is lost or damaged within the United States, please dial

*611 from your device or 1.800.922.0204 to speak with a Customer

Service Representative. From outside of the United States dial +1-

908-559-4899.

Caution!:

Do not bend or scratch your SIM card. Avoid exposing your SIM

card to static electricity, water or dirt.

1. Press down to slide the battery cover back to remove.

2. Lift the battery from the bottom end and remove.

u810.book Page 19 Friday, May 1, 2009 12:03 PM

Understanding Your Phone 20

3. Make sure the gold contacts of the SIM card are face

down, then slide the SIM card completely into the socket.

4. Insert the top end of the battery into the phone housing

using the directional arrow printed on the battery. The gold

contacts at the battery end must align with contacts on the

phone. Push bottom end of the battery down until it snaps

into place.

SIM

card

slot

u810.book Page 20 Friday, May 1, 2009 12:03 PM

5. Slide the battery cover up until it snaps into place.

u810.book Page 21 Friday, May 1, 2009 12:03 PM

Call Functions 22

Section 3: Call Functions

This section describes how to make or answer a call. It also

includes the features and functionality associated with making or

answering a call.

Making a Call

1. From the home screen, enter the number to call using the

numeric keypad and press .

Dialing Emergency Numbers

You can dial any of the numbers 911, *911, or #911 to place an

emergency call.

•

If your phone is in Verizon

CDMA Mode

, dial 911, *911, or #911, then

press .

•

If your phone is in

Global Mode

, dial 911, then press .

Note:

If you dial 112 or 999 while in

Global Mode

, your phone dials the

emergency number immediately (no prompt).

Emergency Calls in GSM Mode

You can make an emergency call while in

GSM Mode

, even if the

SIM Lock

PIN Lock

is enabled. Emergency call is always

supported.

1. If your phone has the

lock enabled, press the left soft

key

SOS

2. The “

EMERGENCY CALL?

” screen will display. Press the left

soft key

Yes

, or the right soft key

to cancel.

Placing GSM International Calls

Note:

The SIM card must be installed in order to make calls in GSM mode.

Calling the U.S. from another country

The United States is the default (reference country) on your

phone. When both

Assisted Dialing

is set to

(default), and the

reference country is United States of America; you can place a

call to the U.S. from another country by using an existing number

from you contact list (as if you were in the U.S.). In this scenario,

there is no need to add your current country’s exit code when you

are dialing contacts with these settings.

1. From the home screen, press and hold to display

the “

” symbol. The “

” symbol automatically inserts the

exit code for the country from which you are calling.

u810.book Page 22 Friday, May 1, 2009 12:03 PM

2. Press to insert the U.S. country code, then enter

the area code and number.

3. Press . The number is dialed.

Calling Internationally from another country (GSM Only)

1. From the home screen, press and hold to display

the “

” symbol. The “

” symbol automatically inserts the

exit code for the country from which you are calling.

2. Enter the country code of the person you are calling. Enter

the area code, without the leading zero, followed by the

number of the person you are calling.

Note:

There are some exceptions for leaving out the leading zero such as

Italy, Finland and Spain.

Assisted Dialing

This menu allows you to select

Assisted Dialing

for a country

where you are making a call.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

4. Press Assisted Dialing. Press the right soft key

Help

, to view the help menu.

5. With the Assisted Dialing field highlighted, press the

Directional key left or right to select

Off

6. When selecting

, press the Directional key down to

highlight the Reference Country field, and then press the

left soft key

Set

to choose from a list of countries

that support assisted dialing. While on the screen with the

list of Countries, press the left soft key

Details

to edit

the following options, if needed:

•

Country Code

•

IDD Prefix

•

NDD Prefix

•

Area Code

•

National Number Length

7. Press to save any changes made.

Note:

When

Assisted Dialing

, the home screen will display “

Assisted On

”

when dialing an international number.

For more information with international calls, see “Placing GSM

International Calls” on page 22.

u810.book Page 23 Friday, May 1, 2009 12:03 PM

Call Functions 24

Answering a Call

You can answer calls with either the flip open or closed.

To answer a call with the flip in the closed position; open the flip.

The call will be automatically answered.

To answer a call with the flip in the open position; press

to answer the call, or , or the right soft key Ignore

to send the call to voicemail, or left soft key Quiet to

silence the ringer.

Answering Call-Waiting Calls

When you receive a call while on a call:

•

Press to answer the new call.

•

When you press and answer the incoming call, the original

caller is placed on hold.

•

Press the key again to return to your original call.

Call In-Progress Options

Access numerous menus and features even while in a call.

Note:

If the call is disconnected while accessing the Call-In Progress Options,

the options disappear from the display and the phone eventually

returns to the home screen.

1. While in a call, press the right soft key Options. The

following menu items appear in the display.

• Messaging

: Displays the Messages menu.

• Contact List

: Opens Contact list to view your contacts.

• Recent Calls

: Displays recent incoming, missed and outgoing calls.

• Bluetooth Menu

: Displays the Bluetooth menu.

• Main Menu

: Displays the Main menu.

•Notepad

: Opens the Notepad.

• Whisper Mode

: Increases microphone to maximum volume level.

Note:

During a call, turn on Whisper Mode when speaking softly, or when the

caller cannot hear your voice clearly. This mode is useful in meetings

or public places.

2. Press the directional key to highlight a menu. Press to

open the highlighted menu or to activate the feature.

3. Press the left soft key Mute/Unmute to mute the

call. Press again to unmute the call.

Recent Calls

When you place, miss, or receive a call, a record of the call is

saved in Recent Calls, which is a listing of the different types of

calls you can either receive or make. These types of calls are:

•

Missed

: Displays any missed calls.

•

Received

: Displays any received calls that were answered.

•

Dialed

: Displays all outgoing calls made from your phone.

u810.book Page 24 Friday, May 1, 2009 12:03 PM

•

All

: Displays all missed, received, and outgoing calls made from your

phone.

•

View Timers

: Displays amount of time for: Last Call, All Calls,

Received Calls, Dialed Calls, Roaming Calls, Transmit Data, Received

Data, Total Data, Last Reset, Lifetime Calls, and Lifetime Data Counter.

Using the default

Twilight

display theme,

Grid

menu layout: press

Press the directional key right or left to highlight Recent

Calls menu. Press the directional key up or down to highlight the

call type that you want to view and press .

Press the directional key up or down to view the call.

Viewing Recent Call History

Recent Calls retains information such as the duration, date and

time, and whether the call was received, dialed, or missed.

1. From the home screen, press the key.

2. Press the directional key down to highlight the desired

number.

3. Once the desired number is highlighted, press OPEN.

4. The following call information appear in the display:

•Call Type

: The title bar displays if the call is a missed, dialed, or

received.

•Name

: If the caller is in your Contacts list, their name is listed here

as well as the appropriate icon to indicate Mobile 1, Mobile 2,

Home, Work, or Fax. This option only appears if the caller is in your

Contacts list. If the caller is not in your Contacts list, No Name

appears.

• Number

: Displays the telephone number.

•Time

: The time of the call.

•Date

: The date of the call.

•Duration

: The duration of the calls made or received.

5. Press the right soft key Options to display the

following options:

• Save to Contacts

: Save the number to your Contacts list.

Note:

If save doesn't appear, that entry is already in your Contacts list.

• Details

: Displays details about the caller if entered in Contacts.

•Erase

: Deletes the call from Call History.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

•View Timers

: Select to view the call timers for your phone.

6. Press the directional key down to highlight an option. Press

to enter the highlighted option’s sub-menu.

u810.book Page 25 Friday, May 1, 2009 12:03 PM

Call Functions 26

Call History Icons

When you view Recent Calls, an icon to the left of the number

indicates the type of call.

Indicates a Missed call

Indicates a Dialed call

Indicates a Received call

Making Calls Using Call History

1. From the home screen, press . Press the directional

key up or down until the desired number is highlighted.

2. Press to call the highlighted number. Or, you can

press OPEN, then press to call the highlighted

number.

Creating or Updating Contacts Using Call History

1. From the home screen, press then press the

directional key up or down until the desired number is

highlighted. Press the right soft key Options. Save

to Contacts is highlighted. Press .

2. Press the directional key up or down to highlight Add New

Contact or Update Existing. Press .

3. If you selected Add New Contact, the following types are

available.

•

Mobile 1

•

Mobile 2

•

Home

•

Work

•

Fax

4. If you selected

Update Existing

, proceed to step 9.

5. Press the directional key up or down to highlight the

desired entry type (Mobile 1, Mobile 2, Home, Work, or

Fax) then press .

u810.book Page 26 Friday, May 1, 2009 12:03 PM

6. Enter a name for the entry using the keypad. Press the left

soft key Abc if you wish to select a different method

of text entry, such as Word, Abc, ABC, 123, or Symbols.

7. To assign a Speed Dial location, press the directional key

up or down to highlight the number you would like to

assign to a Speed Dial location and press the right soft

key Options. Highlight Set Speed Dial and press

Highlight an unassigned location and press SET. A

confirmation message appears in the display, Yes is

highlighted, press to add Contact to the speed dial

location.

Note:

Voicemail is assigned to Speed Dial location 1. Location 411: directory

assistance, 611: customer service access, 911: emergency phone

number.

Note:

You can assign a speed dial location to each number associated with

the contact (Home, Work, Mobile 1, Mobile 2, and Fax.).

8. When you’re finished entering information for the entry,

press SAVE. The entry is saved to your Contacts.

9. An UPDATE EXISTING pop-up screen with a selection list

of entry types displays. Press the directional key up or

down to highlight the desired type then press . The

number is added to the selected entry and saved to your

Contacts.

Deleting Call History Entries

1. From the home screen, press then press the

directional key up or down until the desired number is

highlighted. Press the right soft key Options. A pop-

up menu appears in the display.

2. Press the directional key down to highlight Erase and

press . Select Yes or No at the ERASE ENTRY? pop-

up screen.

3. Press .

Deleting All Call History Entries

1. From the home screen, press .

2. Press the right soft key Options. A pop-up menu

appears in the display.

u810.book Page 27 Friday, May 1, 2009 12:03 PM

Call Functions 28

3. Press the directional key down to highlight Erase All and

press . Select Yes or No at the ERASE ALL ENTRIES?

pop-up screen.

4. Press .

Contacts

Making Calls Using Contacts

Contacts are entries that you create to store names, numbers,

and other information for people or groups of interest. If you’ve

already entered information into your Contacts list, you can recall

and dial the contact easily. For more information, refer to “Adding

a Contact” on page 47.

1. From the home screen, press the right soft key

Contacts. Press the directional key up or down until the

contact that you want to call is highlighted then press

VIEW. Details for the contact appear in the display.

Note:

To quickly locate a name, press (or multi-press) any key on the keypad

that corresponds to the first, second, and/or third letters of the

contact’s name.

2. If the entry contains more than one number, press the

directional key up or down to highlight the desired number.

3. Press to call the number.

Roaming

What is Roaming?

Your phone can roam on other compatible digital networks.

Roaming occurs when you travel outside a pre-designated

coverage area. The roaming icon displays when roaming is active

and extra charges may apply when making or receiving calls.

Note:

Some features may be unavailable while roaming.

Roaming Options

The following roaming options are available:

–

Home Only

- Your phone is available for normal operation only in the

designated coverage area.

–

Automatic

: The preferred roaming list is used to acquire service.

Note:

Contact Verizon Wireless for information regarding preferred systems.

To change your Roaming option, follow these steps:

1. Using the default

Twilight

display theme,

Grid

menu layout:

press

2. Press the directional key right or left to highlight

Settings & Tools menu. Press Phone Settings.

Press System Select.

u810.book Page 28 Friday, May 1, 2009 12:03 PM

䊳

For

CDMA Settings:

3. Press

CDMA Settings

4. Press the directional key up or down to choose

Home Only

Automatic

and press .

䊳

For

GSM Settings:

5. Press

GSM Settings

6. Press the directional key up or down to choose

Automatic

Manual

, and press .

Voice Commands

Voice Commands is advanced speech recognition software that

can be used to activate a wide variety of functions on your phone.

Voice Commands software automatically voice activates all

contacts for voice dialing and searching, no pre-recording or

training needed. Speak phone numbers naturally to dial, and use

voice commands to navigate phone menus.

Voice Commands Settings

You can adjust the settings and preferences by opening Voice

Commands menu. Using this menu, you can change the

following Voice Command features:

1. From the home screen, press the

Voice Commands

key

. The Voice Commands screen displays.

2. Press the right soft key

Settings

.The following

options appear in the display:

• Digit Dial Readout

: Reads out the numbers pressed when dialing

a phone number.

• Menu Readout

: Reads out the menu items as you scroll through

them.

•TXT Msg Readout

: Reads out the text in a TXT message.

Note:

Picture or Video messages cannot be read back to you.

• Choice List

: If Voice Commands is not absolutely confident that it

has correctly identified a name or number, it can display a choice

list of up to three possibilities, and prompt you to confirm the

correct one. You can control when choice lists appear by changing

the Choice Lists setting to the following:

–

Automatic

: Voice Commands displays a choice list when it is not

confident it has identified the correct choice from among multiple

alternatives.

u810.book Page 29 Friday, May 1, 2009 12:03 PM

Call Functions 30

–

Always Off

: Voice Commands never displays a choice list. Instead,

the application picks the best from among the possible choices.

•Sensitivity

: Sensitivity controls the balance between rejecting too

much, which means the phone frequently does not recognize

names, numbers, or commands, and rejecting too little, which

means it frequently recognizes something even if nothing was said.

When Voice Commands rejects an utterance, it displays a message

such as “Please repeat…” or “No match found.” If you frequently

experience these messages, you might be able to get better

recognition by selecting the Sensitivity setting Reject Less. If you

frequently experience false activations (Voice Commands detects a

wrong match), you might be able to get better performance by

selecting the Sensitivity setting Reject More.

• Adapt Voice

: Use the Train Voice menu to adapt digit dialing and

name dialing to your voice.

•Prompts

: Allows you to select the voice command system

characteristics.

–

Mode

: Select the voice command system mode from the following:

Prompts

- for handset to read out voice command prompts

Readout

- for handset to read out prompts, dialing digits, menus,

and TXT messages (regardless of individual settings for these

above)

Tones Only

- for handset to prompt you with a tone only

–

Audio Playback

: Allows audio playback to play through the

speakerphone or through the earpiece.

–

Timeout

: Allows you to set the timeout interval. If not used within 5 sec

or 10 sec Voice Command will timeout and return to the home screen.

• Call Alert

: Provides audible readout of the phone number and/or

name (if in your contact list) of an incoming call.

• Key Setting

: Allows you to select the method the Voice Command

menu can be accessed. Select Voice Key Only, Voice Key / Headset,

Voice Key / Flip.

Voice Commands

The following is a list of functions that you can perform using

Voice Commands speech recognition on your phone.

•

Call <Name or #>:

Dial by saying a Name in your Contacts List, a

Name and a Location (home, work, mobile) or the phone number.

•

Send <Msg Type>

: Send a text, picture, or video message to a

number or to someone in your Contacts List.

•

Goto <Menu>:

Open any application installed on your device.

•

Check <Item>

: Provides details of your phone status, voicemail,

messages, missed calls, time, signal strength, battery level, and

volume level.

•

Contacts <Name>:

Open the contact record for any name in your

Contacts List.

•

Play <Playlist name>

: Opens a music playlist.

•

My Verizon

: Provides information about your Verizon Wireless

account.

•

Help

: Provides a helpful tutorial on how to use Voice Commands.

u810.book Page 30 Friday, May 1, 2009 12:03 PM

Call <Name or #>

Call Digit Dialing

Digit Dial allows you to dial any phone number by simply

speaking the digits into the phone. No training is necessary, and

Digit Dial is programmed to understand natural speech.

1. From the home screen, press the Voice Commands key

2. After a brief pause, a list of optional commands appears in

the display and the audio prompt "Please say a command"

plays through the earpiece or speakerphone.

3. Say “Call” at a distance of 3-12 inches from the phone in a

natural voice.

4. “Please say the name, number, voice mail or last number”

plays through the earpiece or speakerphone.

5. Say the area code and number that you want to dial into

the microphone, clearly and naturally.

6. The number that you said is repeated through the speaker

and your phone dials the number.

7. If Voice Commands is not sure of the number that you said,

a list of possible matches appears in the display.

8. You’re asked to confirm the correct number as Voice

Commands displays the results.

•

Say “

Yes

” to confirm the number.

•

Say “

” to reject the number.

•

Say “

Exit

” to exit the Voice Command.

•

Say “

Repeat

” to have the selected number read one more time.

Call Name Dialing

To use Name Dial, you’ll need to have entries stored in your

Contacts list. See page 47 for information on creating a Contacts

list.

1. From the home screen, press the Voice Commands key

2. After a brief pause, a list of optional commands appears in

the display and the audio prompt “Please say a command”

plays through the earpiece or speakerphone.

3. Say “Call” at a distance of 3-12 inches from the phone in a

natural voice.

4. “Please say the name, number, voice mail or last number”

plays through the earpiece or speakerphone.

5. To use Name Dialing, say the name of the contact that you

want to dial.

u810.book Page 31 Friday, May 1, 2009 12:03 PM

Call Functions 32

6. The name that you said is repeated through the speaker

and your phone dials the number.

7. If Voice Commands is not sure of the number that you said,

a list of possible matches appears in the display.

8. You’re asked to confirm the correct number as Voice

Commands displays the results.

•

Say “

Yes

” to confirm the number.

•

Say “

” to reject the number.

•

Say “

Exit

” to exit the Voice Command.

•

Say “

Repeat

” to have the selected number read one more time.

Note:

In case various number are displayed , “Which Number?” will display

in the Listening menu option.

9. The location is repeated through the speaker and your

phone dials the number.

Send <Msg Type>

Send Text

1. From the home screen, press the Voice Commands key

2. A list of commands appears in the display and the audio

prompt "Please say a command" plays through the

earpiece or speakerphone.

3. Say “Send Text” at a distance of 3-12 inches from the

microphone. “Please say the name or number” plays

through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts

list, first name followed by last name or the phone number

of the recipient.

Note:

In case various number are displayed , “Which Number?” will display

in the Listening menu option.

5. The contact name appears in the To: field. For more

information, refer to “Creating and Sending Text

Messages” on page 60.

u810.book Page 32 Friday, May 1, 2009 12:03 PM

Send Picture

Send Picture allows you to access the Picture Messaging menu.

You can use entries stored in My Pictures or you can take a

picture of an image using the camera.

1. From the home screen, press the Voice Commands key

2. A list of commands appears in the display and the audio

prompt "Please say a command" plays through the

earpiece or speakerphone.

3. Say “Send Picture” at a distance of 3-12 inches from the

microphone. “Please say the name or number” plays

through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts

list, first name followed by last name.

Note:

In case various number are displayed , “Which Number?” will display

in the Listening menu option.

5. The contact name appears in the To: field. For more

information, refer to “Creating and Sending Picture

Messages” on page 62.

Send Video

Send Video allows you to access Video message, you can use

entries stored in My Videos or you can record a video using the

camcorder.

1. From the home screen, press the Voice Commands key

2. A list of commands appears in the display and the audio

prompt “Please Say a Command” plays through the

earpiece or speakerphone.

3. Say “Send Video” at a distance of 3-12 inches from the

microphone. “Please say the name or number” plays

through the earpiece or speakerphone.

4. Say the name exactly as it is displayed in your Contacts

list, first name followed by last name.

Note:

In case various number are displayed , “Which Number?” will display

in the Listening menu option.

5. The contact name appears in the To: field. For more

information, refer to “Creating and Sending Video

Messages” on page 64.

u810.book Page 33 Friday, May 1, 2009 12:03 PM

Call Functions 34

Goto <Menu>

The “Go To” command allows you to access a menu within the

phone (for example, “Go to Contacts”). If no menu option is

stated, a list of options will be provided.

Opening Menus and Applications

To navigate menu items on your phone or to open select

applications using Voice Commands, perform the following:

1. From the home screen, press the Voice Commands key

2. A list of commands appears in the display and the audio

prompt “Please say a command” plays through the

earpiece or speakerphone.

3. To begin navigation of menu items, say “Go To” at a

distance of 3-12 inches from the microphone. The menu

list displays and a prompt of “Please choose” plays

through the earpiece or speakerphone.

4. Select one of the following menus or applications:

Contacts

Recent Calls

Messaging

Media Center

Settings &

Tools

Mobile Web

V CAST Videos

My Music

5. The option spoken opens.

Check <Item>

Checking Phone Status

Note:

Checking Phone Status

can be accessed with the phone flip in either the

closed or open position.

1. From the home screen, press the Voice Commands key

2. A list of commands appears in the display and the audio

prompt "Please say a command" plays through the

earpiece or speakerphone.

3. Say “Check” at a distance of 3-12 inches from the

microphone. “Please choose” plays through the earpiece

or speakerphone. Valid “Check” commands are:

•

Status

": Displays and announces all of the available status

indicators in sequence through the earpiece or speakerphone—if it

is enabled.

•

Voicemail

" : Displays the number of new voicemail messages.

•

Messages

Displays and announces the number of new

voicemail, TXT, and Picture messages through the earpiece or

speakerphone—if it is enabled.

•

Missed Calls

": Displays the missed call log.

u810.book Page 34 Friday, May 1, 2009 12:03 PM

•

Time

": Displays and announces the current time through the

earpiece or speakerphone—if it is enabled.

•

Signal Strength

": Displays and announces the current EVDO

and 1x signal strength levels through the earpiece or

speakerphone—if it is enabled.

•

Battery

": Displays and announces the current battery level

through the earpiece or speakerphone—if it is enabled.

•

Volume

Displays and announces the current master volume

setting through the earpiece or speakerphone—if it is enabled.

4. The option spoken opens.

Contacts <Name>

Name Lookup

Note:

Name Lookup

can be accessed with the phone flip in either the closed or

open position.

For name lookup, you must have entries in your Contacts list.

1. From the home screen, press the Voice Commands key

. A list of commands appears in the display and the

audio prompt "Please say a command" plays through the

earpiece or speakerphone.

2. Say “Contacts <name>” at a distance of 3-12 inches from

the microphone. Say the contact name exactly as it is

displayed in your Contacts list, first name followed by last

name. The contact name appears in the display with other

information that you’ve entered for that contact.

3. After verifying that the contact name is correct, any phone

numbers associated with that contact will be read back to

you. You will then be asked "Do you want to call, create

new, modify, erase a contact?"

4. At this point, to call, create new, modify or erase a contact,

use the following steps:

•

To call a contact, say “Call”. The phone number highlighted on your

display will be called.

Note:

To call another number other than the default number highlighted,

scroll to the desired phone number and press .

•

To create a new contact, say “Create New”. “Say the number” will

be asked. Follow the instructions when prompted.

•

To modify a contact, say “Modify”. “What would you like to

modify?” will be asked followed by a list of existing phone number

types for that contact. Say what you would liked modified. After the

selected modification is finished, “Contact updated” will be

announced.

u810.book Page 35 Friday, May 1, 2009 12:03 PM

Call Functions 36

•

To erase a contact, say “Erase”. The contact highlighted on your

display will be erased if confirmed. “Erase contact?” will be asked.

Say “Yes” to erase the contact or “No” to cancel.

Play <Playlist name>

Play

1. From the home screen, press Voice Commands key

2. A list of commands appears in the display and the audio

prompt "Please say a command" plays through the

earpiece or speakerphone.

•

Say “Play” or “My Music” at a distance of 3-12 inches from the

microphone. The Music Library displays.

•

Say “Play All” or “Play All Songs” at a distance of 3-12 inches from

the microphone to play all songs on your device.

•

Say the “Play <playlist name>” at a distance of 3-12 inches from

the microphone.

Note:

The playlist name must be spoken exactly as saved in My Music

library.

3. “Please Choose” plays through the earpiece or

speakerphone.

4. Say “All Songs” to play all songs on your handset, say a

playlist name to play that playlist, or say “My Music” to

access the Music Library.

My Verizon

Check your Verizon Wireless account status by voice command.

Note:

This features launches the browser to your account page and requires

a data plan and is subject to Verizon Wireless data coverage.

Help

Provides helpful information on how to use Voice Commands.

1. From the home screen, press the Voice Commands key

2. A list of commands appears in the display and the audio

prompt “Please say a command” plays through them

earpiece or speakerphone.

3. Say, "Help" at a distance of 3-12 inches from the phone in

a natural voice. The tutorial appears in the display.

u810.book Page 36 Friday, May 1, 2009 12:03 PM

Section 4: Menu Navigation

This section explains the menu navigation for your phone. An

outline of the available menus of your phone is included.

Menu Navigation

Access menus using the Directional key, soft keys

, or use a shortcut.

Your Renown™ comes with the

Twilight

display theme as the

default display theme. You may change the display theme to the

Slick Black

theme. For more information about choosing

Slick

Black

display theme, see “Display Themes” on page 90.

The

Twilight

display theme has the

Grid

main menu layout as the

default setting. You can change the main menu layout to

Tab

List

. For more information about choosing main menu layouts,

see “Main Menu Settings” on page 91.

To access menus using

Grid

List

main menu layouts, use the

following steps:

1. From the home screen, press MENU.

2. Press the Directional key up or down to highlight the

desired menu and then press .

3. Press the Directional key up or down to highlight the

desired sub-menu and then press .

To access menus using the

Tab

main menu layout, use the

following steps:

1. From the home screen, press MENU.

2. Press the Directional key left or right to highlight a

menu.

3. When the desired menu is highlighted, press the

Directional key up or down to highlight a sub-menu and

press .

Return to the Previous Menu

Press to return to the previous menu.

Menu Number Accelerators

You can also access menus and sub-menus faster and with

fewer key presses using menu number accelerators. To access a

menu or sub-menu quickly, press

, then enter the

menu and/or sub-menu number(s) for the feature desired.

See the following examples for standard menu navigation and

number accelerators using the default

Twilight

display theme,

Grid

main menu layout.

u810.book Page 37 Friday, May 1, 2009 12:03 PM

Menu Navigation 38

Example using

standard menu navigation

1. From the home screen, press MENU. Press the

Directional key to highlight Contacts and then press

2. Press the Directional key down to highlight

Groups

and then press OK.

3. Press the Directional key down to highlight

Family

and then press VIEW.

Example using

number accelerators

1. From the home screen, press MENU.

2. Press the Directional key to highlight

Contacts

Press

Groups

Family

to access the Family

sub-menu.

Directional Key Shortcuts

From the home screen, press a Directional key to launch its

corresponding application. For more information on personalizing

directional shortcut keys, see “Set Shortcuts” on page 94.

Menu Outline

The following list shows the menu structure and indicates the

accelerator number assigned to each option.

Contacts

1: New Contact

2: Contact List

3: Groups

1: No Group

2: Business

3: Colleague

Calendar

Mobile Web

My Verizon My Shortcuts*

*Press the directional key to select a menu item.

2. New Picture Message

3. Bluetooth On/Off

4. Alarm Clock

1. New TXT Message

Default Directional

Shortcut Keys

u810.book Page 38 Friday, May 1, 2009 12:03 PM

4: Family

5: Friends

4: Speed Dials

5: In Case of Emergency

6: My Name Card

Messaging

1: New Message

1: TXT Message

2: Picture Message

3: Video Message

4: Voice Message

2: Inbox

3: Sent

4: Drafts

5: Voicemail

6: Visual Voice Mail

7: Mobile IM

8: Email

9: Chat

Recent Calls

1: Missed

2: Received

3: Dialed

4: All

5: View Timers

Calculator

Media Center

1: Music & Tones

1: V CAST Music | Rhapsody

2: Get New Ringtones

1: Get New Applications

3: My Ringtones

1: Get New Ringtones

4: My Music

5: My Sounds

1: Record New

6: Sync Music

2: Picture & Video

1: V CAST Videos

2: Get New Pictures

1: Get New Applications

3: My Pictures

4: My Videos

5: Take Picture

6: Record Video

u810.book Page 39 Friday, May 1, 2009 12:03 PM

Menu Navigation 40

7: Online Album

3: Games

1: Get New Applications

4: Mobile Web

5: Browse & Download

1: Get New Applications

6: Extras

1: Get New Applications

Mobile IM

VZ Navigator

Settings & Tools

1: My Verizon

2: Tools

1: Voice Commands

2: Calculator

1: Normal

2: Tip

3: Converter

3: Calendar

4: Alarm Clock

5: Stop Watch

6: World Clock

7: Notepad

3: Bluetooth Menu

1: Add New Device

4: Sounds Settings

1: Call Sounds

1: Call Ringtone

1: Get New Ringtones

2: Call Vibrate

2: Alert Sounds

1: TXT Message

1: Tone

1: Get New Ringtones

2: Vibrate

3: Reminder

2: Multimedia Message

1: Tone

1: Get New Ringtones

2: Vibrate

3: Reminder

3: Voicemail

1: Tone

1: Get New Ringtones

2: Vibrate

3: Reminder

u810.book Page 40 Friday, May 1, 2009 12:03 PM

4: Emergency Tone

5: Device Connect

3: Keypad Sounds

4: Keypad Volume

5: Service Alerts

1: ERI

2: Minute Beep

3: Call Connect

6: Power On/Off

1: Power On

2: Power Off

5: Display Settings

1: Banner

1: Personal Banner

2: ERI Banner

2: Backlight

1: Display

1: Duration

2: Brightness

2: Keypad

3: Wallpaper

1: Main Screen

1: My Pictures

2: My Videos

2: Front Screen

4: Display Themes

5: Main Menu Settings

6: Menu Font Size

7: Dial Fonts

1: Style

2: Size

8: Clock Format

1: Main Clock

2: Front Clock

6: Phone Settings

1: Time & Date

2: Airplane Mode

3: Network Mode

4: Set Shortcuts

1: Set My Shortcuts

2: Set Directional Keys

5: Voice Command Settings

1: Digit Dial Readout

2: Menu Readout

3: TXT Msg Readout

4: Choice List

5: Sensitivity

6: Adapt Voice

7: Prompts

8: Call Alert

u810.book Page 41 Friday, May 1, 2009 12:03 PM

Menu Navigation 42

9: Key Setting

6: Language

7: Location

8: Current Country

9: Phone Security

0: SIM Security

*: System Select

1: CDMA Settings

2: GSM Settings

#: NAM Select

1: NAM Select

2: Auto NAM Select

:Quick Search

7: Call Settings

1: Answer Options

2: Auto Retry

3: TTY Mode

4: One Touch Dial

5: Voice Privacy

6: Data Settings

7: DTMF Tones

8: Assisted Dialing

8: Memory

1: Save Options

1: Pictures

2: Videos

3: Sounds

2: Phone Memory

1: Phone Memory Usage

2: My Pictures

3: My Videos

4: My Ringtones

5: My Music

6: My Sounds

3: Card Memory*

1: Card Memory Usage

2: My Pictures

3: My Videos

4: My Music

5: My Sounds

9: Phone Info

1: My Number

2: SW/HW Version

3: Icon Glossary

0: SIM Info

* Card memory menu listing is available only when memory card

is inserted in phone.

u810.book Page 42 Friday, May 1, 2009 12:03 PM

Section 5: Entering Text

This section outlines how to select the desired text input mode

when entering characters into your phone. This section also

describes how to use Word text entry system to reduce the

amount of key strokes associated with entering text.

Changing the Text Entry Mode

1. While composing a message, press left soft key Abc

to display a pop-up menu with the following Text Entry

Mode options:

•

Word

•

Abc

•

ABC

•

123

•

Symbols

•

Domain Extensions*

•

Quick Text**

Note:

*The Domain Extensions option is only available when the To field is

highlighted. Use the Shortcuts option to quickly enter @, .com, .net, or

.edu to an Email address.

**The Quick Text option is only available when entering the body of the

message. Use the Quick Text option to quickly enter a message.

Entering Text Using Word Mode

Word

recognizes the most commonly used word for any

sequence of key presses and inserts that word into your

message. It’s much faster than the traditional method of text

entry (Abc) and requires only one key press per letter of the word

that you’re spelling.

1. From the home screen, press the left soft key

Message, then press New Message, TXT

Message to compose a new text message.

2. Enter the phone number or Email address of the recipient,

then press the Directional key down to move to the

Text field.

3. Press the left soft key Abc to display a pop-up menu

containing text entry mode options.

4. Abc is highlighted by default. Press the Directional

key up or down to highlight Word, then press .

u810.book Page 43 Friday, May 1, 2009 12:03 PM

Entering Text 44

Now, for practice, enter the word “Hello” into your

message by pressing each of the following keys only once:

Word recognizes that the most frequently used word for the

sequence of numbers entered. The word you just entered is

“HELLO.” If more than one word shares the same sequence,

Word provides the most common of the two. Press to

display other words in the dictionary, if available.

Entering Upper and Lower Case

•

Enter characters while in

ABC

mode by pressing the key that contains

the desired characters for “

”.

•

Press the key repeatedly to cycle through other available characters for

that key.

•

Pause briefly when the desired character appears in the display to

accept the character and therefore insert it into the message.

•

Press to enter a space.

•

To cycle between initial caps, uppercase, and lower case for

characters in

ABC

mode, briefly press .

•

To cycle between initial caps, uppercase, and lower case for

characters in

Word

mode, briefly press .

Entering Symbols

Use symbol mode to enter symbols @ or % into a text message.

1. From the home screen, press the left soft key

Message, then press New Message, TXT

Message to compose a new text message.

2. Enter the phone number or Email address of the recipient,

then press the Directional key down to move to the

Text field.

3. Press the left soft key Abc to display a pop-up menu

containing the text entry mode options.

Abc

is highlighted by default. Press the Directional

key up or down to highlight Symbols, then press . The

first of three screens containing symbols appears in the

display.

5. Press left soft key Prev or right soft key Next

to page through the other symbols, if necessary.

6. Enter the key that corresponds with the symbol that you

wish to enter. For example, press for an

exclamation point (

) on the first page of symbols.

HELLO

u810.book Page 44 Friday, May 1, 2009 12:03 PM

7. Repeat steps 3 through 6 to insert as many symbols into

your message as desired.

Entering Numbers

Enter numbers into a text message while in number mode (

123

For instructions on changing text entry modes see “Changing the

Text Entry Mode” on page 43..

1. From the home screen, press the left soft key

Message, then press New Message, TXT

Message to compose a new text message.

2. Enter the phone number or Email address of the recipient,

then press the Directional key down to move to the

Text field.

3. Press the left soft key Abc to display a pop-up menu

containing the text entry mode options.

Abc

is highlighted by default. Press the Directional

key up or down to highlight 123, then press .

5. Enter the key that corresponds with the number that you

wish to enter. For example, press for the number

6. When you are finished adding numbers, press the left soft

key 123 to select a different method of text entry.

u810.book Page 45 Friday, May 1, 2009 12:03 PM

Understanding Your Contacts 46

Section 6: Understanding Your Contacts

This section allows you to manage your daily contacts by storing

their name and number in your Address Book.

Opening Contacts Menu

The Contacts menu provides access to powerful features such as

adding Groups, creating and sending vCards, and viewing the

phone number assigned to your phone by Verizon Wireless.

NOTE

: The menu navigation instructions for this section uses the

default

Twilight

display theme,

Grid

menu layout.

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press the Directional key up or down to highlight the

Contacts menu item of your choice, then press to

select it.

Contacts Icons

You can assign multiple entries to a contact. The icons in the

following table represent all available entry types.

Mobile 1 icon

. Enter a mobile number for the

entry in this field.

Home icon

. Enter a home number for the

entry in this field.

Work icon

. Enter the work number for the

entry in this field.

Email 1 icon

. Enter an Email address for the

entry in this field.

Group icon

. Select an available group to

associate with the entry in this field.

Picture icon

. Select an available pre-loaded

image or downloaded image from Picture ID

to associate with the contact.

Ringtone icon

. Select a ringtone to associate

with the entry in this field.

Mobile 2 icon

. Enter a secondary mobile

number for the entry in this field.

Fax icon

. Enter a fax number for the entry in

this field.

Email 2 icon

. Enter a secondary Email

address for the entry in this field.

Note icon

. Enter a note for the entry in this

field.

u810.book Page 46 Friday, May 1, 2009 12:03 PM

Adding a Contact

When you add information to your Contacts, you can add it as a

new entry or as an existing entry.

Method 1

Creating a new Contact from the home screen

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press New Contact.

3. Enter a name for the entry using the keypad.

4. Press the Directional key up or down to highlight the

appropriate type (

Mobile

Home

Work

, etc.). Once

highlighted, use the keypad to enter required information.

5. Press the Directional key up or down to highlight

other type fields, if desired. Enter information using the

keypad.

6. To assign a Speed Dial location after entering the number,

press the right soft key Options. Highlight Set

Speed Dial and press .

7. Highlight an unassigned location and press SET. A

confirmation message appears in the display, Yes is

highlighted, press to add the Contact to the speed dial

location.

Note:

Voicemail is assigned to Speed Dial location 1.

Note:

You can assign a speed dial location to each number associated with

the contact (Home, Work, Mobile 1, Mobile 2, and Fax.).

8. When you’re finished entering information for the entry,

press SAVE to save the entry to your Contacts.

Method 2

Adding a number to a new or existing Contact from the home

screen

You can add new numbers to the Contacts by simply entering the

number from the home screen, then following the necessary

prompts to complete the process.

1. From the home screen, enter the number to save using the

keypad, then press the left soft key Save.

You’re prompted to select from Add New Contact ,

Update Existing or Notepad.

u810.book Page 47 Friday, May 1, 2009 12:03 PM

Understanding Your Contacts 48

2. Press to enter the number as a Add New Contact,

press to add the number to Update Existing or

press to save the entry to Notepad.

3. If you selected Add New Contact, the following types are

available.

•

Mobile 1

•

Mobile 2

•

Home

•

Work

•

Fax

4. If you selected

Update Existing

, proceed to Step 9.

5. Press the Directional key up or down to highlight the

desired entry type (mobile, home, work, etc.) then press

6. Enter a name for the entry using the keypad. Press the left

soft key Abc if you wish to select a different method

of text entry, such as Word, Abc, ABC, 123, or Symbols.

7. To assign a

Speed Dial

location, highlight the number you

would like to assign to a Speed Dial location and press the

right soft key Options. Highlight Set Speed Dial and

press .

Highlight an unassigned location and press SET. A

confirmation message appears in the display, Yes is

highlighted, press to add Contact to the speed dial

location.

Note:

Voicemail is assigned to Speed Dial location 1.

Note:

You can assign a speed dial location to each number associated with

the contact (Home, Work, Mobile 1, Mobile 2, and Fax.).

8. When you’re finished entering information for the entry,

press SAVE. The entry is saved to your Contacts.

9. If you selected Update Existing, the Contact List opens in

Search mode. Press the Directional key up or down

to browse through entries, or enter the name of the entry

using the keypad. Once you’ve highlighted the entry you

wish to update, press .

u810.book Page 48 Friday, May 1, 2009 12:03 PM

10. An UPDATE EXISTING pop-up screen with a selection list

of entry types displays. Press the Directional key up

or down to highlight the desired type then press . The

number is added to the selected entry and saved to your

Contacts.

Method 3

Storing Numbers After a Call

Once you’ve finished a call, you can store the number of the

caller to your Contact List.

Note:

If the call was incoming and Caller ID information was unavailable,

then the store option is also unavailable.

1. After you press to end your call, the call time,

length of call and phone number appears in the display.

2. Press the right soft key Save. You’re prompted to

select Add New Contact, Update Existing or Notepad.

Follow the on-screen prompts to designate other

information.

Adding Pauses

Calls to automated systems often require a password or account

number. Instead of manually entering numbers each time, store

the numbers to your Contacts along with special characters

called pauses.

1. From the home screen, enter the number.

2. Press the right soft key Options to highlight

2-Sec

Pause

(A “P” appears in the display) or Wait (A “W”

appears in the display) and press .

•2-Sec Pause

: A two-second pause stops the calling sequence for

two seconds and then automatically sends the remaining digits.

•Wait

: A hard pause stops the calling sequence until further input

from you.

3. When you’re finished entering information for the entry,

press SAVE.

4. Continue with Step 2, Method 2 for Adding a number to a

new or existing Contact from the home screen.

Note:

Entering multiple Add Pauses extends the length of a pause. For

example, two consecutive Add Pauses cause a total pause time of four

seconds. Keep in mind pauses count as digits towards the 48-digit

maximum.

u810.book Page 49 Friday, May 1, 2009 12:03 PM

Understanding Your Contacts 50

Contact Groups

You can place Contact entries into categories, called “

Groups

.”

Groups allow you to search your Contacts faster, quickly send

messages to one or more group members, and more.

Note:

By default, new entries to your Contacts are placed into the No Group

unless another group is specified.

View Groups

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press

Groups

. The following groups appear in the

display.

•

No Group

•

Business

•

Colleague

•

Family

•

Friends

3. Press the Directional key up or down to highlight the

desired group, then press to access the group and

view its contents.

Move an Entry to Another Group

1. From the home screen, press the right soft key

Contacts. Press the Directional key up or down to

highlight the contact you wish to move.

2. Press the left soft key Edit. Press the

Directional key up or down to scroll to the Group option.

3. Press the left soft key Set. Choose from the

following groups:

•

No Group

•

Business

•

Colleague

•

Family

•

Friends

4. Press the Directional key up or down to highlight the

group containing the entry that you wish to move, then

press .

5. Press SAVE. The selection has been saved to the

designated group.

u810.book Page 50 Friday, May 1, 2009 12:03 PM

Create a New Group

In addition to the five groups already in your phone, you can

create additional groups (a maximum of 25). New group names

must be within a 32-character limit.

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press

Groups

. Your existing groups appear in the

display.

3. Press the left soft key

New

. A

NEW GROUP

pop-up

menu displays with the “Enter Name” field highlighted.

4. Enter the Group name.

5. Press SAVE to save. The Groups list now displays

the new group added.

Send a Text Message to Members of a Group

Use Send Message in the Group feature to send a message to as

many as 10 members of a group at once.

Note:

Text messaging availability varies when roaming off the Verizon

Wireless Network.

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press

Groups

. Your existing groups appear in the

display.

3. Highlight the desired group name and press the right soft

key Options. Highlight New TXT Msg and press

4. Press the Directional key up or down to highlight the

contacts in the group you want to send a message. Press

to place a checkmark next to each selection to send

messages to.

5. Press the left soft key Done after selecting up to 10

contacts.

u810.book Page 51 Friday, May 1, 2009 12:03 PM

Understanding Your Contacts 52

Note:

You can mark up to 10 members of a group for message distribution. If

you try to mark an 11th member, you’ll be notified that “MAXIMUM

NUMBER OF RECIPIENTS IS 10”.

6. Press the Directional key down to place the cursor in

the Text field.

7. Enter the content of your message using the keypad.

8. To send the text message, press SEND.

Send a Picture Message to Members of a Group

Note:

Picture Messaging charges apply per your Calling Plan. Monthly plans

are available. Higher rates apply for International Picture Messaging

(where available). Please check

verizonwireless.com/vzglobal

for rates

and coverage. Compatible device required. Not available everywhere.

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press

Groups

. Your existing groups appear in the

display.

3. Highlight the desired group name and press the right soft

key Options. Highlight New Picture Msg and press

4. Use the Directional key down to highlight the

contacts in the group to which you want to send a

message. Press to place a checkmark next to each

selection to send messages to.

5. Press the left soft key Done after selecting up to 10

contacts.

6. Press the Directional key up or down to move the

cursor into the following entry fields:

•Text

: Add text to the Picture Message.

•Picture

: Add an picture from My Pictures gallery to the message.

–

To add a picture in the picture entry field, press the left soft key

My Pics

. Use the Directional key to highlight the

desired picture and press .

• Sound:

Add sound to the Picture Message.

• Subject

: Add a subject to the Picture Message.

•Name Card

: Attach a Name Card or an entry in your Contacts to

the message.

7. Once you’ve finished adding the desired content to your

Picture Message, press SEND to send the Picture

Message to the intended recipients.

u810.book Page 52 Friday, May 1, 2009 12:03 PM

Send a Video Message to Members of a Group

Note:

Video Messaging charges apply per your Calling Plan. Compatible

device required. Monthly plans are available. Not available

everywhere.

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press

Groups

. Your existing groups appear in the

display.

3. Highlight the desired group name and press the right soft

key Options. Highlight New Video Msg and press

4. Press the Directional key up or down to highlight the

contacts in the group to which you want to send a

message. Press to place a checkmark next to each

selection to send messages to.

5. Press the left soft key Done after selecting up to 10

contacts.

6. Press the Directional key down to move the cursor

into the following entry fields:

•Text

: Add text to the Video Message.

•Video

: Add an video from the My Videos gallery to the message.

–

To add a video in the video entry field, press the left soft key

Videos

. Use the Directional key to highlight the desired

video and then press .

• Subject

: Add a subject to the Video Message.

•Name Card

: Attach a Name Card or an entry in your Contacts to

the message.

7. Once you’ve finished adding the desired content to your

Video Message, press SEND to send the Video

Message to the intended recipients.

Send a Voice Message to Members of a Group

Note:

Only available within Verizon Wireless Enhanced Services Area.

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press

Groups

. Your existing groups appear in the

display.

u810.book Page 53 Friday, May 1, 2009 12:03 PM

Understanding Your Contacts 54

3. Highlight the desired group name and press the right soft

key Options. Highlight New Voice Msg and press

4. Press the Directional key up or down to highlight the

contacts in the group to which you want to send a

message. Press to place a checkmark next to each

selection to send messages to.

5. Press the left soft key Done after selecting up to 10

contacts.

6. Press to start your voice message recording. Press

the left soft key Pause if needed, to pause the

recording. Press the left soft key Resume to resume

the recording. Press

Stop

to stop recording.

7. Press the Directional key down to move the cursor

into the following entry fields:

•Text

: Add text to the Video Message.

• Subject

: Add a subject to the Video Message.

•Name Card

: Attach a Name Card or an entry in your Contacts to

the message.

8. Once you’ve finished adding the desired content to your

Video Message, press SEND to send the Video

Message to the intended recipients.

Finding a Contacts Entry

From the home screen, you can quickly open the Contacts list.

Contacts is a quick way of viewing entries you’ve stored in the

Contacts list.

1. From the home screen, press the right soft key

Contacts. The Contact List displays.

2. In the

Go To

field, enter the first and second letters of the

name you wish to search until it is highlighted.

Editing an Existing Contact Entry

1. From the home screen, press the right soft key

Contacts.

2. Press the Directional key up or down to highlight the

contact list entry and press the left soft key Edit.

3. Press the Directional key up or down to highlight the

name, number, Email address, or other field that you wish

to edit.

u810.book Page 54 Friday, May 1, 2009 12:03 PM

4. Press to backspace and delete numbers, text, or

symbols.

5. Press and hold to erase all numbers in the

highlighted field. Use the keypad to re-enter numbers, text,

or symbols.

6. When you’re finished editing the entry, press SAVE.

Your changes are saved.

Deleting a Contact Entry

1. From the home screen, press the right soft key

Contacts.

2. Press the Directional key up or down to highlight the

contact list entry and press VIEW.

3. Press the left soft key Erase. A pop-up “

ERASE

CONTACT?

” screen displays.

4. Highlight

Yes

, then press .

Speed Dialing

Note:

1-Touch, 2-Touch, and 3-Touch dialing allows you to call numbers

stored in your Contact List quicker.

Speed dialing allows you to press and hold a key (or keys) to dial

the number associated with those key(s). There are three types

of speed dialing;

1-touch

2-touch

, and

3-touch dialing

Note:

Memory location 001 is reserved for voicemail. Location 411: directory

assistance, 611: customer service access, 911: emergency phone

number.

1-touch dialing

Call phone numbers assigned to memory locations 002 - 009 by

pressing and holding the any of the 2 - 9 keys. For example, to

speed dial the number assigned to location 2, press and hold

until the name and number appear in the display and the

number is dialed.

2-touch dialing

Call phone numbers assigned to keys 010 through 099 by briefly

pressing the first key, then pressing and holding the second key.

For example, to speed dial the number assigned to 013, briefly

press , then press and hold until the number dials.

u810.book Page 55 Friday, May 1, 2009 12:03 PM

Understanding Your Contacts 56

3-touch dialing

Call phone numbers assigned to memory locations 100 through

999 by briefly pressing the first and second keys, then pressing

and holding the third key.

For example, to dial location number 113, briefly press ,

then press and hold until the number dials.

Assign a speed dial location

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press

Speed Dials

. The Speed Dials screen displays

with the first available number highlighted.

3. Press the Directional key up or down to highlight the

number you wish to assign or enter the speed dial location

using the keypad. Press SET. The SET SPEED DIAL

screen displays.

4. Press the Directional key up or down to highlight the

entry you want, then press .

5. At the pop-up screen, highlight Yes or No and press .

6. Continue to assign speed dial entries or press to

return to the home screen.

My Name Card

My Name Card allows you to create a virtual business card. Once

completed, you can send the card to recipients as a vCard

attachment.

1. From the home screen, press

. Press the

Directional key to highlight Contacts and then press

2. Press My Name Card.

3. My Name Card opens with the Name field highlighted.

4. Enter information in each of the fields as desired. Press the

Directional key up or down to move between fields,

then use the keypad to enter information.

Note:

A check mark appears to the left of selected contacts.

5. When finished, press to save the Name Card.

u810.book Page 56 Friday, May 1, 2009 12:03 PM

Sending Contact Information (vCard) to another Bluetooth

enabled phone

You can send individual contacts or your entire contact list to or

from another device that is Bluetooth enabled*.

Note:

*If Bluetooth is not powered on, or your Renown™ is not paired with

another device see “Turning Bluetooth On or Off” on page 84..

Important!:

Not all Bluetooth devices will accept a name card.

1. From the home screen, press right soft key

Contacts.

2. Highlight a contact and press right soft key Options.

3. Press Send Name Card. The following options

display:

• TXT Message

: Allows you to send a name card via TXT Message.

A name card with a picture cannot be sent in a TXT Message

because it exceeds the maximum number of characters allowed.

• Picture Message

: Allows you to send a name card via Picture

Message.

• Video Message

: Allows you to send a name card via Video

Message.

• Voice Message

: Allows you to send a name card via Voice

Message.

•Bluetooth

: Allows you to send a name card to a Bluetooth enabled

device.

4. Press Bluetooth.

5. Highlight the desired contact and press MARK. To

choose all contacts, press right soft key Mark All.**

When finished, press left soft key Done.

6. Highlight the destination device an press .

Note:

If your Renown™ is not paired already with the destination device,

follow the instructions on page 84 for Bluetooth Search.

7. Highlight Yes to connect to the other device and press

8. The other device will ask to connect. Press .

9. “

CONNECTING

” appears in the display.

10. When the information is exchanged, a message will appear

that the transfer is complete.

Note:

** All information will be transferred except for group name , ringtone,

and Emergency (ICE) contact reference.

u810.book Page 57 Friday, May 1, 2009 12:03 PM

Understanding Your Contacts 58

Finding My Phone Number

My Number displays the ten-digit number assigned to your

phone.

1. From the home screen, press

2. Press the Directional key to highlight the

Settings & Tools menu and press .

3. Press Phone Info.

4. Press My Number. MY NUMBER screen displays

with

CDMA Number

and

GSM Number

5. Press the Directional key highlight either

CDMA

GSM

number and press . The mobile device, phone

number, and mobile identification numbers are displayed.

Note:

You may need to enter your GSM phone number, assigned to the SIM

card, at the initial

GSM Number

screen display. You can also edit the

GSM number, if necessary, by pressing the left soft key

Edit

Emergency Contacts

Adding Emergency Contacts

1. From the home screen, press the right soft key

Contacts

In Case of Emergency

is highlighted, press

VIEW

Contact 1

Contact 2

Contact 3

and

Personal Info

options

are shown. Highlight a contact location and press

ADD

Note:

Use the

Personal Info

option to enter information such as illnesses,

allergies, and other detailed information.

4. Press

From Contacts

to add an emergency number

from your contacts list. Select a Contact and press .

u810.book Page 58 Friday, May 1, 2009 12:03 PM

5. Press

New Contact

to enter a new contact as an

emergency number. Enter Contact information and press

SAVE

6. The Emergency Contact is added and is displayed in the

Contact List in red font.

Unassign an Emergency Contact

1. From the home screen, press the right soft key

Contacts

. Press the Directional key to highlight the

Emergency Contact you want to unassign.

Note:

Emergency contacts are displayed in red font.

2. Press the right soft key

Options

3. Press

Unassign ICE Contact

. The “

UNASSIGN ICE

CONTACT?

” confirmation screen appears in the display.

Yes

is highlighted, press to confirm or highlight

and press to return to your contact list.

Add Contact Emergency Contact Added

Unassign ICE Contact

u810.book Page 59 Friday, May 1, 2009 12:03 PM

Messaging 60

Section 7: Messaging

This section allows you to send or receive different types of

messages. It also includes the features and functionality

associated with messaging.

Types of Messages

Your phone is capable of sending Email, text, picture and video

messages. Send Email, Mobile Instant Messages (IM), text,

picture, and video messages by simply entering the Email

address or the phone number of the recipient in the To: <.........>

or Send To field when creating a new message.

Retrieving New Messages

While text messages from other phones are delivered directly to

your phone, Picture and Video messages and Email will be stored

in the Inbox of the message server and the server will alert you to

new messages. Therefore you need to retrieve new messages to

your phone and read them on the phone.

Retrieving a Text Message

When you receive a message the message ringer sounds, (unless

turned off), and New Text Message appears in the display along

with the closed envelope icon . The date and time of the

message also appear in the display.

1. Press to View now or highlight View later and press

. The message is saved to your Inbox where you can

view it later.

2. With the message open, press the right soft key

Options to Forward, Reply w. Copy, Save Quick Text, Lock,

Add To Contacts, Messaging Font Size, Extract Addresses

and Message Info. Press the left soft key

Erase

erase the message.

3. With the message open, press REPLY to return a

message to the sender.

Creating and Sending Text Messages

You can send text messages to another mobile phone or to an

Email address.

Note:

The Samsung Renown requires a SIM card in order to send Text

Messages outside of the U.S. (in GSM networks).

NOTE

: The menu navigation instructions for this section uses the

default

Twilight

display theme,

Grid

menu layout.

u810.book Page 60 Friday, May 1, 2009 12:03 PM

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press

New

Message.

Note:

You can also access

Messaging

menu by pressing the left soft key

3. Press TXT Message to compose a new text

message.

4. Enter the phone number or Email address of the recipient.

At any point while entering your recipient(s) phone number

or Email address, press the left soft key 123 or the

right soft key Add soft keys to display additional

options.

䊳

Press the left soft key

123

to change Text Entry Mode.

Choose Word, Abc, ABC, 123, Symbols and Domain Extensions

modes of text entry.

䊳

Press the right soft key

Add

to add a recipient From

Contacts, Recent Calls, Groups or To Contacts.

Note:

If you do not select an option press the to return to your

message.

5. Press the key to move to the Text field. In the text

field, compose your message using the keypad. At any

point while composing a message, press the left soft key

Abc or the right soft key Options soft keys to

display additional options.

䊳

Press the left soft key

Abc

to change Text Entry Mode.

Choose Word, Abc, ABC,123, Symbols and Quick Text modes

of text entry.

䊳

Press the right soft key

Options

to display a pop-up

menu with the options listed:

• Save As Draft

: Save the message to your Draft folder.

•Add

: Select this option to display the following sub-menus:

–

Quick Text

: Choose from up to 15 pre-loaded messages. You can add

15 additional messages by pressing the right soft key

Options

then press

New

. You can erase Quick Text messages by pressing the

left soft key

Erase

–

Graphic

: Lists preloaded and downloaded graphics.

–

Animation

: Lists preloaded and downloaded animations.

–

Sound

: Lists preloaded and downloaded sounds.

u810.book Page 61 Friday, May 1, 2009 12:03 PM

Messaging 62

–

Name Card

: Attach My Name Card information or information from

one of your Contacts.

•Edit Text Format

: Allows you to edit the text size, alignment, style,

color, and background color.

• Priority Level

: Save the message with a High or Normal priority.

• Callback #

: Provides the ability to send a callback # with the

message.

• Enh. Delivery Ack

: Displays a pop-up screen notifying the

message sent has been received.

• Cancel Message

: Cancels the message and allows you to save it

in the Drafts folder.

Note:

If you do not select an option press the to return to your

message.

6. Press the Directional key to highlight an option. Press

to perform the function for the option, or to enter its

sub-menu.

7. To send the message, press SEND.

Creating and Sending Picture Messages

Note: Picture Messaging charges apply per your Calling Plan. Monthly plans are

available. Higher rates apply for International Picture Messaging (where available).

Please check

verizonwireless.com/vzglobal

for rates and coverage. Compatible

device required. Not available everywhere.

Picture Message combines text, picture, and sound creating an

intuitive message. This is also known as Multimedia Messaging

(MMS).

1. From the home screen, press

Press the Directional key to highlight the

Messaging

menu and then press .

2. Press

New

Message.

3. Press Picture Message.

4. Enter the phone number or Email address of the recipient.

At any point while entering your recipient(s) phone number

or Email address, press the left soft key 123 or the

right soft key Add soft keys for additional options.

䊳

Press the left soft key

123

to change Text Entry Mode.

Choose Word, Abc, ABC, 123, Symbols and Domain Extensions

modes of text entry.

u810.book Page 62 Friday, May 1, 2009 12:03 PM

䊳

Press the right soft key

Add

to add a recipient From

Contacts, Recent Calls, Groups, To Online Album or To

Contacts.

Note: If you do not select an option press the to return to your message.

5. Press the key to move to the Text field. In the text

field, compose your message using the keypad. At any

point while composing a message, press the left soft key

Abc or the right soft key Options soft keys to

display additional options.

䊳

Press the left soft key

Abc

to change Text Entry Mode.

Choose Word, Abc, ABC,123, Symbols and Quick Text modes

of text entry.

䊳

Press the right soft key

Options

to display a pop-up

menu with the options listed:

•Preview

: Shows the message before it is sent.

• Save As Draft

: Save the message to your Draft folder.

• Add Quick Text

Choose from up to 15 pre-loaded messages. You

can add 15 additional messages by pressing the right soft key

Options

the press

New.

You can erase Quick Text messages by

pressing the left soft key

Erase

• Priority Level

: Save the message with a High or Normal priority.

• Cancel Message

: Cancels the message and allows you to save it

in the Drafts folder.

Note: If you do not select an option press the to return to your message.

6. Press the Directional key down to highlight the

Picture field. Press the left soft key My Pics to add

a picture, and follow the prompts. Press to attach the

highlighted image.

7. Highlight the Sound field. Press the left soft key

Sounds

to select a sound.

Highlight the desired sound or highlight Record New to

record a sound and press .

8. Highlight the Subject field. In the Subject field, compose

your message using the keypad. Press the left soft key

Abc to change entry mode. Press the right soft key

Options to

Add Quick Text

. Highlight the desired

Quick Text phrase, and press .

9. Highlight the Name Card field. Press the left soft key

Add to select Name Card or an entry from your

Contacts list. Follow the prompts and press to insert.

u810.book Page 63 Friday, May 1, 2009 12:03 PM

Messaging 64

10. Once all fields are complete, press to send the

message to the intended recipient(s).

Creating and Sending Video Messages

Note:

Video Messaging charges apply per your Calling Plan. Compatible

device required. Monthly plans are available. Not available

everywhere.

Video Message combines text, and video creating an intuitive

message. This is also known as Multimedia Messaging (MMS).

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press

New

Message.

3. Press Video Message.

4. Enter the phone number or Email address of the recipient.

At any point while entering recipient(s) phone number or

Email address, press the left soft key 123 or the

right soft key Add soft keys to display additional

options.

䊳

Press the left soft key

123

to change Text Entry Mode.

Choose Word, Abc, ABC, 123, Symbols and Domain Extensions

modes of text entry.

䊳

Press the right soft key

Add

to add a recipient From

Contacts, Recent Calls, Groups, To Online Album or To

Contacts.

Note: If you do not select an option press the to return to your message.

5. Press the key to move to the Text field. In the text

field, compose your message using the keypad. At any

point while composing a message, press the left soft key

Abc or the right soft key Options soft keys to

display additional options.

䊳

Press the left soft key

Abc

to change Text Entry Mode.

Choose Word, Abc, ABC,123, Symbols and Quick Text modes.

䊳

Press the right soft key

Options

to display a pop-up

menu with the options listed:

•Preview

: Shows the message before it is sent.

• Save As Draft

: Save the message to your Draft folder.

u810.book Page 64 Friday, May 1, 2009 12:03 PM

• Add Quick Text

Choose from up to 15 pre-loaded messages. You

can add 15 additional messages by pressing the right soft key

Options

and then press

New

. You can erase Quick Text messages

by pressing the left soft key

Erase

• Priority Level

: Save the message with a High or Normal priority.

• Cancel Message

: Cancels the message and allows you to save it

in the Drafts folder.

Note:

If you do not select an option press the to return to your

message.

6. Press the Directional key down to highlight the Video

field. Press the left soft key Videos to add a video,

and follow the prompts. Press to attach the

highlighted video.

7. Highlight the Subject field. In the Subject field, compose

your message using the keypad. Press the left soft key

Abc to change entry mode. Press the right soft key

Options to

Add Quick Text

. Highlight the desired

Quick Text phrase, and press .

8. Highlight the Name Card field.

9. To add Name Card, press the left soft key Add to

select My Name Card or an entry from your Contacts list.

Follow the prompts and press to insert.

10. Once all fields are complete, press to send the

message to the intended recipient(s).

Creating and Sending Voice Messages

You can send voice messages to another mobile phone or to an

Email address.

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press

New

Message.

3. Press Voice Message.

4. Press

to start recording. Press the left soft key

Pause

if needed. After completing your recording, press

STOP

to end the recording.

u810.book Page 65 Friday, May 1, 2009 12:03 PM

Messaging 66

5. At the

NEW VOICE MESSAGE

screen, enter the phone

number or Email address of the recipient. At any point

while entering your recipient(s) phone number or Email

address, press the left soft key 123 or the right soft

key Add soft keys for additional options.

䊳

Press the left soft key

123

to change Text Mode. Choose

Word, Abc, ABC, 123, Symbols or Domain Extensions modes of

text entry.

䊳

Press the right soft key

Add

to add a recipient From

Contacts, Recent Calls, Groups, To Online Album or To

Contacts.

6. Press the key to move to the Voice field. Your voice

recording is shown. Press the right soft key

Options

to display a pop-up menu with the options listed:

•Review

: Plays the voice recording.

• Save As Draft

: Save the message to your Draft folder.

• Priority Level

: Save the message with a High or Normal priority.

• Remove Recording

: Removes the voice recording.

• Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

7. Press the left soft key

Record

to re-record a new

voice recording, if needed.

8. Press the Directional key down to highlight the Text

field. In the text field, compose your message using the

keypad. At any point while in the text field, press the left

soft key Abc or the right soft key Options soft

keys to display additional options.

䊳

Press the left soft key

Abc

to change Text Mode. Choose:

Word, Abc, ABC,123, Symbols or Quick Text modes of text

entry.

䊳

Press the right soft key

Options

to display a pop-up

menu with the options listed:

•Review

: Shows the message before it is sent.

• Save As Draft

: Save the message to your Draft folder.

• Add Quick Text

Choose from up to 15 pre-loaded messages.

You can add 15 additional messages by pressing the right soft key

Options

then press

1. New

. Enter your new quick text and

press

SAVE

. You can erase Quick Text messages by pressing

the left soft key

Erase

• Priority Level

: Save the message with a High or Normal priority.

• Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

u810.book Page 66 Friday, May 1, 2009 12:03 PM

9. Press the Directional key down to highlight the

Subject field. In the Subject field, compose your message

using the keypad. Press the left soft key Abc to

change entry mode. Press the right soft key Options

Add Quick Text

. Highlight the desired Quick Text phrase,

and press .

10. Press the Directional key down to highlight the Name

Card field. Press the left soft key Add to select My

Name Card or an entry from your Contacts list. Follow the

prompts and press to insert.

Once all fields are complete, press

SEND

Receiving Picture Messages

When you receive a new Picture Message, your phone will sound

and the screen will display View Now and

View Later

. For the

following steps, choose

View Now

Note:

For the option Reject to appear in the display when you receive a

Picture Message, Pic-Video Auto Receive mode must be set to Off in

the Message Settings menu. The default Pic-Video Auto Receive value

is set to On.

1. When you choose

View Now

, the image (and text if any)

contained in the Picture Message appears in the display.

2. Press the Directional key up or down to scroll through

the message or view the entire picture if necessary.

3. Press the left soft key Mute/Unmute (while an

attached sound byte is playing), or the right soft key

Options. The following options may appear in the display:

•Play Again

: Replays the sound byte attached to a Picture Message.

•Forward

: Forward the message to another recipient.

•Erase

: Deletes the message. Only displays in menu when a sound

byte isn’t attached to the message that was sent.

• Save Picture

: Saves the picture in a Picture message to My

Pictures.

• Save As Ringtone:

Saves the sound byte received with the

message as a ringtone.

• Save Sound

: Saves the sound received with the message.

•Save Quick Text

: Saves the text received in the message to the

Quick Text list.

•Save Name Card

: Saves the attached name card to your Contact

List.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

• Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

u810.book Page 67 Friday, May 1, 2009 12:03 PM

Messaging 68

• Messaging Font Size

Allows you to select the font size of the message

being viewed. Select Normal or Large.

• Message Info

: Provides the following information: From and

Callback #, Priority, Message Type, Size and Attachment(s) name

and size.

Note:

When viewing a Picture message, you can view the previous message

by pressing the Directional key left. You can also view the next

message by pressing the Directional key right.

Receiving Video Messages

When you receive a new Video Message, your phone will sound

and the screen will display View Now and

View Later

. For the

following steps, choose

View Now

Note:

For the option Reject to appear in the display when you receive a Video

Message, Multimedia Auto Receive mode must be set to Off in the

Message Settings menu. The default Pic-Video Auto Receive value is

set to On.

1. When you choose

View Now

, the image (and text if any)

contained in the Video Message appears in the display.

2. Press PLAY to play the video.

3. Press the Directional key up or down to scroll through

the message.

4. Press the left soft key Erase to erase the message

or the right soft key Options. The following options

may appear in the display:

• Reply:

Replies to the received message.

•Forward

: Forward the message to another recipient.

•Erase

: Erases the video.

• Save Picture

: Saves an image of the video in a Video message to

My Videos.

• Save As Ringtone

: Saves the sound byte received with the

message as a ringtone.

•Save Sound

: Saves the sound byte received with the message in

My Sounds.

•Save Quick Text

: Saves the text received in the message to the

Quick Text list.

•Save Name Card

: Saves the attached name card to your Contact

List.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

• Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

• Messaging Font Size

Allows you to select the font size of the message

being viewed. Select Normal or Large.

u810.book Page 68 Friday, May 1, 2009 12:03 PM

• Message Info

: Provides the following information: From and

Callback #, Priority, Message Type, Size and Attachment(s) name

and size.

Note:

When viewing a Video message, you can view the previous message

by pressing the Directional key left. You can also view the next

message by pressing the Directional key right.

Receiving Voice Messages

When you receive a new Voice Message, your phone will sound

and the screen will display View Now and

View Later

. For the

following steps, choose

View Now

Note:

For the option Reject to appear in the display when you receive a Voice

Message, Multimedia Auto Receive mode must be set to Off in the

Message Settings menu. The default Multimedia Auto Receive value is

set to On.

1. When you choose

View Now

, the recording (and text if any)

contained in the Voice Message appears in the display.

2. Press the Directional key up or down to scroll through

the message or view the entire picture if necessary.

3. Press the left soft key Mute/Unmute (while an

attached sound byte is playing), or the right soft key

Options. The following options may appear in the display:

•Play Again

: Replays the sound byte attached to a Picture Message.

•Forward

: Forward the message to another recipient.

•Erase

: Deletes the message. Only displays in menu when a sound

byte isn’t attached to the message that was sent.

• Save As Ringtone:

Saves the sound byte received with the

message as a ringtone.

• Save Sound

: Saves the sound received with the message.

•Save Quick Text

: Saves the text received in the message to the

Quick Text list.

•Save Name Card

: Saves the attached name card to your Contact

List.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

• Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

• Messaging Font Size

Allows you to select the font size of the message

being viewed. Select Normal or Large.

•Message Info

: Provides the following information: From and

Callback #, Priority, Message Type, Size and Attachment(s) name

and size.

Note:

When viewing a Voice message, you can view the previous message

by pressing the Directional key left. You can also view the next

message by pressing the Directional key right.

u810.book Page 69 Friday, May 1, 2009 12:03 PM

Messaging 70

With the message open, press REPLY to return a message

to the sender.

Receive Messages While in a Call

1. When you receive a message while in a call, the NEW

MESSAGE dialog box appears in the display. Press to

View Now or highlight View Later and press .

Note:

Text messages can only be viewed during a call. Multimedia messages

can not be downloaded during a call.

2. You can view a text message without disconnecting your

call by pressing the right soft key Options and then

select Messaging.

3. Press Inbox, highlight the message you want to

view and press OPEN to view the message.

View a Multimedia Message Later

1. When you receive a new Multimedia message you would

like to view later, highlight View Later and press .

2. To view the message, press the left soft key

Message.

Press

Inbox.

4. Highlight the unopened message, then press OPEN.

The INBOX screen appears first with information about the

message. Press DOWNLOAD to view Multimedia

message.

Message Folders

Your phone provides default message folders for your Text and

Multimedia messages.

Note:

To quickly view all messages in the Inbox, Sent, or Drafts folders, open

one message and then press the Directional key right. To view the

next message or press the Directional key left to view the

previous message.

Inbox

Received messages of all types are stored in the Inbox folder.

1. From the Messaging menu, press Inbox.

2. Press the Directional key up or down to highlight the

message that you wish to view.

3. Press OPEN to view contents of the highlighted

message.

u810.book Page 70 Friday, May 1, 2009 12:03 PM

4. While viewing a message press the right soft key

Options to display the available options. Options are

dependent on the message type:

•

For Text Messages the following options may appear in the display:

–

Forward

: Forwards the message to another recipient.

–

Reply w. Copy

: Replies to the received message with a text message

and allows you to send a copy of the message to another contact.

–

Save Quick Text

: Saves the text received in the message to the

Quick Text list.

–

Lock/Unlock

Locks or unlocks the entry to prevent accidental

deletion.

–

Add to contacts

: Saves the number of the sender to your Contacts

as a new entry or add to an existing entry.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Extract Addresses

: Displays all Contact Numbers, Email Addresses

and URLs extracted from the opened message. Press left soft key

Save

to save the number to your contacts or press to

call the sender.

–

Message Info

: Provides the following information: From (also

provides the date and time the message was received), Callback #,

Priority, Message Type, Size and Attachments (if any).

•

For Picture Messages the following options may appear in the

display:

–

Play Again

: Replays the sound byte attached to a Picture Message.

–

Forward

: Forwards the message to another recipient.

–

Erase

: Deletes the message. Only displays in menu when a sound byte

is attached to the message that was sent.

–

Save Picture

: Saves the picture sent in a Picture message to My

Pictures.

–

Save As Ringtone

: Saves the sound byte received with the message

as a ringtone.

–

Save Sound

: Saves the sound byte received with the message in My

Sounds.

–

Save Quick Text

: Saves the text received in the message to the

Quick Text list.

–

Save Name Card

: Saves the attached name card to your Contact

List.

–

Lock/Unlock

Locks or unlocks the entry to prevent accidental

deletion.

–

Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: From (also

provides the date and time the message was received), Callback #,

Priority, Message Type, Size and if a Picture, Sound or Name Card were

included in the message.

•

For Video Messages the following options may appear in the

display:

–

Replies to the received message.

u810.book Page 71 Friday, May 1, 2009 12:03 PM

Messaging 72

–

Forward

: Forward the message to another recipient.

–

Erase

: Erases the video.

–

Save Picture

: Saves an image of the video in a Video message to My

Videos.

–

Save As Ringtone

: Saves the sound byte received with the message

as a ringtone.

–

Save Sound

: Saves the sound byte received with the message in My

Sounds.

–

Save Quick Text

: Saves the text received in the message to the

Quick Text list.

–

Save Name Card

: Saves the attached name card to your Contact

List.

–

Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

–

Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: From and

Callback #, Priority, Message Type, Size and Attachment(s) name

and size.

•

For Voice Messages the following options may appear in the

display:

–

Play Again

: Replays the sound byte attached to a Picture Message.

–

Forward

: Forwards the message to another recipient.

–

Erase

: Deletes the message. Only displays in menu when a sound byte

is attached to the message that was sent.

–

Save As Ringtone

: Saves the sound byte received with the message

as a ringtone.

–

Save Sound

: Saves the sound byte received with the message in My

Sounds.

–

Save Quick Text

: Saves the text received in the message to the

Quick Text list.

–

Save Name Card

: Saves the attached name card to your Contact

List.

–

Lock/Unlock

Locks or unlocks the entry to prevent accidental

deletion.

–

Add To Contacts

: Save the number of the sender to your Contacts

as a new entry or add to an existing entry.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: From (also provides

the date and time the message was received), Callback #, Priority,

Message Type, Size and if a Picture, Sound or Name Card were

included in the message.

Note:

If no sound byte is attached to the message, press the left soft key

Erase to delete the message. Press the left soft key Mute/

Unmute to mute/unmute the sound byte attached to the message.

5. For Video Messages, press PLAY to play to the

message.

u810.book Page 72 Friday, May 1, 2009 12:03 PM

6. For Text and Picture Messages, press REPLY to reply

to the message.

Note:

When the Inbox exceeds 100 text messages, the first message in the

list is replaced with the next incoming message. Picture and Video

messages are replaced when the phone’s maximum memory is

reached. For information on how to set Auto Erase Inbox and Auto Save

Sent see “Changing Message Settings” on page 79.

Sent

Your phone stores messages in the Sent folder, regardless of

whether the message was successfully transmitted. Verify if and

when a message was successfully transmitted by enabling the

Enh. Delivery Ack feature in TXT Message options.

Note:

Enhanced Delivery Acknowledgement can't be set for Multimedia

message.

Review Messages in the Sent Folder

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press Sent.

3. Highlight the message you wish to review, then press

OPEN.

4. While viewing the message, press the right soft key

Options

to display options listed. Options are dependent on

the type of message:

•

For Text Messages the following options may appear in the display:

–

Forward

: Forwards the message to another recipient.

–

Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

–

Save Quick Text

: Saves the text sent in the message to the Quick

Text list.

–

Add To Contacts

: Adds the sender’s information to your contact list.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: Send To Number

(also provides the date and time the message was sent), Priority,

Message Type, Size, Status, and Cause Code.

•

For Picture Messages the following options may appear in the

display:

–

Play Again:

Replays the sound in the message.

–

Forward

: Forwards the message to another recipient.

–

Erase

: Deletes the message. Only displays in menu when a sound byte

is attached to the message that was sent.

–

Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

–

Save Quick Text

: Saves the text sent in the message to the Quick

Text list.

u810.book Page 73 Friday, May 1, 2009 12:03 PM

Messaging 74

–

Add To Contacts

: Adds the sender’s information to your contact list.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: Sent To Number

(also provides the date and time the message was sent), Priority,

Message Type, Size, Attachment(s) (if a Graphic, Sound or Name Card

were included in the message), Status, and Cause Code.

•

For Video Message the following options may appear in the display:

–

Forward

: Forwards the message to another recipient.

–

Resend

: Allows you to resend the message.

–

Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

–

Save Quick Text

: Saves the text sent in the message to the Quick

Text list.

–

Add To Contacts

: Adds the sender’s information to your contact list.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: Send To Number

(also provides the date and time the message was sent), Priority,

Message Type, Size, Attachment(s) (if a Video or Name Card were

included in the message), Status, and Cause Code.

•

For Voice Messages the following options may appear in the

display:

–

Play Again:

Replays the sound in the message.

–

Forward

: Forwards the message to another recipient.

–

Erase

: Deletes the message. Only displays in menu when a sound byte

is attached to the message that was sent.

–

Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

–

Save Quick Text

: Saves the text sent in the message to the Quick

Text lis t .

–

Add To Contacts

: Adds the sender’s information to your contact list.

–

Messaging Font Size

: Allows you to select the font size of the

message being viewed. Select Normal or Large.

–

Message Info

: Provides the following information: Sent To Number

(also provides the date and time the message was sent), Priority,

Message Type, Size, Attachment(s) (if a Sound or Name Card was

attached), Status and Cause Code.

Note:

If no sound byte is attached to the message, press the left soft key

Erase to delete the message. Press the left soft key Mute/

Unmute to mute/unmute a sound byte attached to the picture

message.

5. Press the Directional key up or down to highlight the

desired option.

6. Press to perform the function for the highlighted

option.

u810.book Page 74 Friday, May 1, 2009 12:03 PM

7. From the Sent menu, press the left soft key Erase to

delete the message from the Sent folder. Highlight Yes to

delete, or No to return to the Sent menu.

Drafts

Draft messages are those that have been composed but never

sent. You can return to the Drafts folder at any time to view, edit,

or send a draft message.

Create a Draft Text Message

1. From the home screen, press

. Press the

Directional key to highlight

Messaging

and press

2. Press New Message.

3. Select the type of message you want to create.

4. Enter the phone number of the recipient, then press the

5. Compose your message using the keypad, then press the

right soft key Options. A pop-up menu appears in

the display.

6. Scroll down with the Directional key until Save As

Draft is highlighted, then press . A confirmation

message appears in the display and your message is

saved to the Drafts folder.

View and Edit Draft Messages

7. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

8. Press Drafts.

9. Press the Directional key to highlight the message

you wish to view, then press EDIT. The message

opens in the Text field with the message text displayed.

Note:

For

Text Messages

, after selecting

EDIT,

the message opens in the

to field. Press to move to the

Text

field.

10. Press to backspace and delete any characters in

the display, if desired. Press and hold to erase all

characters in the field.

11. Press the right soft key Options. A pop-up menu

appears in the display with the options listed.

u810.book Page 75 Friday, May 1, 2009 12:03 PM

Messaging 76

•

For Text Messages the following options may appear in the display:

•

Save As Draft

: Save the message to your Draft folder.

•Add

: Select this option to display the following sub-menus:

–

Quick Text

: Choose from up to 15 pre-loaded messages. You can add

15 additional messages by pressing the right soft key

Options

and then press

New

. You can erase Quick Text messages by pressing

the left soft key

Erase

–

Graphic

: Lists preloaded and downloaded graphics.

–

Animation

: Lists preloaded and downloaded animations.

–

Sound

: Lists preloaded and downloaded sounds.

–

Name Card

: Attach My Name Card information or information from

one of your Contacts.

•

Edit Text Format

: Allows you to edit the text size, alignment, style,

color, and background color.

•

Priority Level

: Save the message with a High or Normal priority.

• Callback #

: Provides the ability to send a callback # with the

message.

•

Enh. Delivery Ack

: Displays a pop-up screen notifying the

message sent has been received.

•

Cancel Message

: Cancels the message and allows you to save it

in the Drafts folder.

•

For Picture-Video Messages the following options may appear in

the display:

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Add Quick Text

: Choose from up to 15 pre-loaded messages. You

can add 15 additional messages by pressing the right soft key

Options

and then press

New

. You can erase Quick Text messages by

pressing the left soft key

Erase

–

Priority Level

: Save the message with a High or Normal priority.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

•

For Voice Messages the following options may appear in the

display:

–

Review

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Add Quick Text

: Choose from up to 15 pre-loaded messages. You can

add 15 additional messages by pressing the right soft key

Options

then press

1. New

. Enter your new quick text and press

SAVE

You can erase Quick Text messages by pressing the left

soft key

Erase

–

Priority Level

: Save the message with a High or Normal priority.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

12. Press the Directional key up or down to highlight the

desired option. Press to perform the function for the

highlighted option.

13. Highlight the following fields for Picture-Video Messages

and press the right soft key Options to display the

following options:

u810.book Page 76 Friday, May 1, 2009 12:03 PM

• Picture-Video

: Insert a picture-video clip.

Note:

Press the left soft key My Pics-Videos to add a new picture or

video clip.

–

Preview

: Allows you to review the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Priority Level

: Save the message with a High or Normal priority.

–

Remove Picture-Video

: Deletes the attached Picture-Video file.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

• Sound

: Insert a sound byte.

Note:

Press the left soft key Sounds to add a new sound byte.

–

Review

: Allows you to review the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Priority Level

: Save the message with a High or Normal priority.

–

Remove Sound

: Deletes the attached sound byte file.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

• Subject

: Insert the subject of your message.

Note:

Press the left soft key Abc to change text entry mode.

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Add Quick Text

: Choose from up to 15 pre-loaded messages. You

can add 15 additional messages by pressing the right soft key

Options

and then press

New

. You can erase Quick Text messages by

pressing the left soft key

Erase

–

Priority Level

: Save the message with a High or Normal priority.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

•Name Card

: Insert and name card.

Note:

Press the left soft key Add to add a name card.

–

Preview

: Allows you to review the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Priority Level

: Save the message with a High or Normal priority.

–

Remove Name Card

: Deletes the name card.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

14. Highlight the following fields for

Voice Messages

and press

the right soft key Options to display the following

options:

•Text

: Insert a text message.

Note:

Press the left soft key

Abc

to change the Entry Mode.

u810.book Page 77 Friday, May 1, 2009 12:03 PM

Messaging 78

–

Review

: Allows you to review the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Add Quick Text

: Choose from up to 15 pre-loaded messages. You

can add 15 additional messages by pressing the right soft key

Options

and then press

New

. You can erase Quick Text messages by

pressing the left soft key

Erase

–

Priority Level

: Save the message with a High or Normal priority.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

• Subject

: Insert the subject of your message.

Note:

Press the left soft key

Abc

to change Entry Mode.

–

Review

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Add Quick Text

: Choose from up to 15 pre-loaded messages. You

can add 15 additional messages by pressing the right soft key

Options

and then press

New

. You can erase Quick Text messages by

pressing the left soft key

Erase

–

Priority Level

: Save the message with a High or Normal priority.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

•Name Card

: Insert and name card.

Note:

Press the left soft key

Add

to add a name card.

–

Preview

: Allows you to preview the message.

–

Save As Draft

: Save the message to your Draft folder.

–

Priority Level

: Save the message with a High or Normal priority.

–

Remove Name Card

: Deletes the name card.

–

Cancel Message

: Cancels the message and allows you to save it in

the Drafts folder.

15. Press the Directional key up or down to highlight the

desired option. Press to perform the function for the

highlighted option.

16. Once you’ve returned to the message composer, press

to send the message, if desired.

Erase Options

You can erase unlocked messages in your Inbox, Drafts folder, or

Sent folder. Locked messages are not erased.

To erase messages:

1. From the Messaging menu, press Options.

2. The following options are available:

•Erase Inbox

: Erases unlocked messages in your Inbox.

•Erase Sent

: Erases unlocked messages in your Sent folder.

• Erase Drafts

: Erases unlocked messages in your Drafts folder.

•Erase All

: Erases unlocked messages in all message folders

(Inbox, Drafts and Sent).

u810.book Page 78 Friday, May 1, 2009 12:03 PM

Changing Message Settings

This menu allows you to define settings for messages sent or

received on your phone. To access your message settings, use

the following steps:

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press the left soft key Settings.

3. The following options appear:

• Entry Mode

: Sets the default entry mode for messaging. Choose from

Word, Abc, ABC, or 123.

• Auto Save Sent

Saves all messages sent. Choose from: On, Off, or

Prompt.

• Auto Erase Inbox

: Erases the oldest message of the same type

(Text or Multimedia) when the maximum number of received

messages of that type is exceeded in the Inbox. For example,

When

the Inbox exceeds 100 text messages, the first message in the list

is replaced with the next incoming message. Picture messages are

replaced when the phone’s memory is full.

Choose from On or Off.

• Messaging Font Size

: Allows you to set the message font size for

message received.

•TXT Auto View

Automatically displays the text message when

received. Choose from On or Off.

• Multimedia Auto Receive

: Automatically receives picture and video

messages into your inbox. Choose from On or Off.

• Domain Extensions

Choose from 4 different pre-loaded domain

extensions or create a new domain extension.

•Quick Text

: Displays the Quick Text pre-defined entries for Text,

Picture, Video or Voice Messages. Press the right soft key New

to add to the Quick Text list or press the left soft key Erase to

erase. Enter your new text and press . The new Quick Text item

shows in the first position of the list.

• Voicemail #

: Enter the speed dial entry set for your voicemail.

• Callback #

: Allows you to use or edit the number assigned to your

handset. Choose from On or Off.

• Signature

: Adds the signature text to each message sent. Choose

from None or Custom.

4. Select the message option you would like to change and

press .

u810.book Page 79 Friday, May 1, 2009 12:03 PM

Messaging 80

Voicemail

New voicemail alerts are sent via a free Text message. These

messages indicate how many new and urgent voicemails are in

your voice mailbox. Open the free text message to view the

number of new and urgent voice messages in your voice

mailbox. If a caller leaves a callback number, this number will

also be sent via Text message.

Note:

Standard Text Messaging charges do not apply.

Receive Voicemail Messages

When you receive a new voicemail message you’ll hear a sound

and an Text message appears in the display.

1. Press the Directional key up or down to select Listen

Now or Listen Later. Press .

View Voicemail Messages in the Inbox Folder

1. From the home screen, press

. Press the

Directional key right or left to highlight the

Messaging

menu. Press Voicemail.

2. Press CALL to dial voicemail and retrieve your

message(s).

Visual VoiceMail

Visual Voicemail gives you a quick and easy way to access your

voicemail. Find exactly the message you are looking for without

having to listen to every voicemail message first. Visual Voicemail

makes it quick and easy to choose the voicemails you want to

listen first. You can also send out your own visual voicemail

messages to select recipients.

1. From the home screen, press

. Press the

Directional key right or left to highlight the

Messaging

menu. Press Visual VoiceMail.

2. The Visual Voicemail information message plays. Press

to proceed to the next screen.

3. At the

CATALOG

screen,

VEA-VZ Navigator

is highlighted.

Press .

4. At the

VEA-VZ NAVIGATOR

screen, two subscription rates

will display. Highlight the desired subscription rate and

press .

5. At the next screen, a confirmation will display. Highlight

and press .

6. After the application is downloaded, press

Yes

to run

the application.

u810.book Page 80 Friday, May 1, 2009 12:03 PM

Mobile IM

The Instant Messaging function allows you to send and receive

instant messages using one of the following communities:

•

AOL® Instant Messenger™

•

Windows Live Messenger

•

Yahoo!® Messenger

Note:

You must first create the Instant Message account before accessing it

on your phone.

Using Mobile IM

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press

Mobile IM

3. Select your instant message community by pressing the

Directional key left or right and press . Use the

on-screen application specific functions and options to use

the instant message applications.

Send and receive Email using Mobile Web. Use these steps:

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press Email.

3. Press the Directional key up or down, select one of

the following Email providers and press .

•

Windows Live

•

AOL

•

Yahoo!

Mail

•

4. Use the on-screen application specific functions and

options to use the Email applications.

u810.book Page 81 Friday, May 1, 2009 12:03 PM

Messaging 82

Chat

Join wireless chat rooms from your phone. Send text messages

and icons to many chat room participants or launch one-on-one

(private) chat rooms. To access a chat room from the browser:

1. From the home screen, press

Press the Directional key to highlight

Messaging

and then press .

2. Press

Chat.

Highlight one of the following chat

rooms and press .

•

MySpace

•

Powerchat

•

Friendz

•

Lavalife Chat

•

Best Mobile Pix

•

Lifestylers

•

MCARDS!

•

3. Use the on-screen application specific functions and

options to use the Chat applications.

u810.book Page 82 Friday, May 1, 2009 12:03 PM

Section 8: Changing Your Settings

This section explains the sound and phone settings for your

phone. It includes display settings, security settings, and extra

settings associated with your phone.

Note:

All instructions on accessing or changing the features will begin from

the

SETTINGS AND TOOLS

menu.

My Verizon

The My Verizon menu connects to the Verizon Wireless Mobile

Web. You can setup Favorites or choose from the available

applications.

Tools

The Tools menu provides the ability to access the following

menus:

•

Voice Commands: For more information, refer to

“Voice Commands”

on page 29.

•

Calculator: For more information, refer to

“Calculator”

on page 125.

•

Calendar: For more information, refer to

“Calendar”

on page 127.

•

Alarm Clock: For more information, refer to

“Alarm Clock”

page 129.

•

Stop Watch: For more information, refer to

“Stop Watch”

page 130.

•

World Clock: For more information, refer to

“World Clock”

page 131.

•

Notepad: For more information, refer to

“Notepad”

on page 131.

Bluetooth Menu

About Bluetooth

Bluetooth is a short-range wireless communications technology

capable of exchanging information over a distance of about 30

feet without requiring a physical connection.

Unlike infrared, you don't need to line up the devices to beam

information with Bluetooth. If the devices are within a range of

one another, you can exchange information between them, even

if they are located in different rooms.

Note:

When connected to your Bluetooth headset, press the multi-function

key on the headset to use Voice Commands’s Voice Dial feature.

Bluetooth Service Profiles

Actually, the Bluetooth specification is a protocol that describes

how the short-range wireless technology works, whereas

individual profiles describe the services supported by individual

devices. Profiles reduce the chance that different devices will not

work together.

u810.book Page 83 Friday, May 1, 2009 12:03 PM

Changing Your Settings 84

Your phone supports the following Bluetooth profile services:

–

Voice Calls are supported using any of the following depending on the

accessory:

•HSP

- Headset

•HFP

- Hands-free profiles*.

–Transfer Object allows sending an

OPP

- Object Push Profile

which allows transfer of vCard (i.e., Contact information)

between devices and vCalendar (i.e. Calendar events).

–

File Transfer allows a Bluetooth Client (typically a PC program) to

connect to the phone via

FTP

– File Transfer Profile to transfer files to

and from My Sounds, My Pictures and My Videos on the phone.

–

Bluetooth Stereo uses

A2DP

- Advanced Audio Distribution Profile and

AVRCP

- Audio/Video Remote Control Profile.

–

Automobile Kits can use any of the following:

HFP

- Hands-free or

PBAP

- Phone Book Access Profiles*.

–Connectivity Connections (i.e. computer) are supported using

SPP

- Serial Port (connecting two BT devices) or

DUN

- Dial Up

Networking (to access the internet).

–

BPP

- Printing is supported using basic printing profiles.

For vehicle/accessory compatibility, go to

www.verizonwireless.com/bluetoothchart

. Phone does not support all

Bluetooth OBEX profiles.

The following Bluetooth options are available:

Turning Bluetooth On or Off

When the Bluetooth radio is turned on, you can use the Bluetooth

features available. When the Bluetooth radio is turned off, you

cannot send or receive information via Bluetooth. To save battery

life or in situations where radio use is prohibited, such as airline

traveling, you can turn off the Bluetooth wireless technology.

NOTE

: The menu navigation instructions for this section uses the

default

Twilight

display theme,

Grid

menu layout.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Bluetooth Menu.

4. Press the left soft key

Turn On

Turn Off

Note:

If Bluetooth is turned on, the Bluetooth icon displays in the top line

of the display.

This option searches for a recognized Bluetooth wireless device.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

u810.book Page 84 Friday, May 1, 2009 12:03 PM

3. Press Bluetooth Menu.

4. Add New Device is highlighted, press .

Note:

If you have NOT already activated Bluetooth on the phone, the

message: “TURN BLUETOOTH POWER ON?” displays. Highlight Yes to

activate or No to exit and press .

5. The prompt: “PLACE DEVICE YOU ARE CONNECTING TO IN

DISCOVERABLE MODE.” is shown. Activate your Bluetooth

device and press .

6. A list of found Bluetooth devices will be displayed.

Highlight a Bluetooth device to be paired and press .

7. The display: “ENTER PASSKEY” is displayed. Enter the

device passkey. The default passkey typically is: 0000.

8. If the default passkey is not successful, the phone will

display the message: “PASSCODE INCORRECT. RE-ENTER”

or "AUTO PAIR FAILED. ENTER PASSKEY". (If you are

attempting to pair with a car kit, be sure to clear any error

message on the car kit display first.) Enter the correct

passkey for the device you want to pair, and press .

9. Select Yes to pair the devices. Once connected the

Bluetooth Connected icon appears in the upper half of

the display. When pairing is complete, highlight Always

Ask or Always Connect and press .

Note:

Only devices supporting

OPP A

will display

Always Ask

and

Always

Connect

display.

Bluetooth Settings

The Bluetooth wireless technology settings menu provides the

ability to view and change the device name, show the visibility,

and set the security for the device.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Bluetooth Menu.

4. Press the right soft key

Options

. The Bluetooth menu

displays with the following options:

•My Phone Name

: Allows you enter a customized name.

• Discovery Mode

: Allows other users to see your accessibility.

Select On for other devices to see your device, or Off for no visibility.

u810.book Page 85 Friday, May 1, 2009 12:03 PM

Changing Your Settings 86

Note:

After selecting On, users have one minute to see your accessibility.

After which Discovery Mode will automatically default back to off.

• Supported Profiles

: Displays a list of supported Bluetooth

profiles. Highlight a profile and press to view a description.

•My Phone Info

: Shows the handset information.

• Auto Pairing

: Allows you to choose

Off

for auto pairing.

Transferring vCalendar events via Bluetooth

You can transfer vCalendar events via Bluetooth. Use the

following steps:

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Bluetooth Menu.

4. If not paired with a Bluetooth device, see “Search” on

page 84.

5. Highlight the desired Bluetooth device.

6. Press right soft key Options and then press

Send Calendar Event.

7. Navigate to highlight a Calendar event in your phone

(which is indicated by light blue color).

8. Press

VIEW

to see a list of all events on that day

9. Highlight the one(s) you want to send and press

MARK

to select the appropriate one(s). Press

Done

when

finished marking events.

10. When you see a prompt

“CONNECT TO <Bluetooth

device>?”

, press with

Yes

highlighted to connect to

that device.

11. The selected Calendar event(s) will be sent to the target

Bluetooth device.

Sounds Settings

Sounds menu provides the ability to access the following menus:

Call Sounds

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Sounds Settings.

4. Press Call Sounds or, press Call Ringtone

to get new ringtones from “Media Center” (

Get New

Applications

) or choose from pre-loaded ringtones.

u810.book Page 86 Friday, May 1, 2009 12:03 PM

5. Press

Call Vibrate

to turn Call Vibrate On or Off.

6. Press to save the setting.

Alert Sounds

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Sounds Settings.

4. Press Alert Sounds. For the following options, you

can set the tone for the message alerts. You can also set

vibration on and set a reminder.

•TXT Message

: Allows you to set a notification for TXT message.

• Multimedia Message

: Allows you to set a notification for a

multimedia message.

• Voicemail

: Allows you to set a notification for Voicemail Message.

•Emergency Tone

: Allows you to set the alert for emergency

dialing. The options for emergency tone are:

–

Alert

: Phone plays the Emergency Dialing tone except when the master

volume setting is Vibrate or All Sounds Off.

Note:

If Emergency Tone is set to

Alert

and Master Volume is set to

Vibrate

the handset will vibrate after emergency dialing.

If Emergency Tone is set to

Alert

and the master Volume is set to

All

Sounds Off

, the handset will not sound after emergency dialing.

–

Vibrate

: phone will vibrate only and will not play the Emergency Dialing

tone.

Note:

If Emergency Tone is set to

Vibrate

and Master Volume is set to

All

Sounds Off

, the handset will not sound after emergency dialing.

–

Off

phone will not play the

Emergency Dialing tone or vibrate.

• Device Connect

: Allows you to set a notification when you

connect to a device.

Keypad Sounds

Select the sound of the keypad when pressed.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Sounds Settings.

4. Press Keypad Sounds.

5. Select Default or Xylophone.

6. Press

to set the new dial sound.

u810.book Page 87 Friday, May 1, 2009 12:03 PM

Changing Your Settings 88

Keypad Volume

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Sounds Settings.

4. Press Keypad Volume.

5. Press the Directional key up or down or volume key

to adjust the keypad volume.

6. Press

SET

to save.

Service Alerts

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Sounds Settings.

4. Press Service Alerts. For the following options, you

can turn the Service Alert On or Off.

•ERI

: Sounds an alert when you go into and out of your coverage

areas.

•Minute Beep

: While on a call your phone beeps after every minute

of usage.

• Call Connect

: Sounds an alert when a call is connected and when

a call has ended.

Power On/Off

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Sounds Settings.

4. Press Power On/Off. You can set the sounds for

Power On and Power Off to either On or Off.

Display Settings

The

Display

menu affects the menu style, home screen

animation, backlight settings, and more.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

• Banner

: Create your own personalized greeting that appears in

home screen or choose the ERI Banner which displays the network

in which you have subscribed.

• Backlight

: Choose settings for the LCD and/or Keypad.

u810.book Page 88 Friday, May 1, 2009 12:03 PM

• Wallpaper

: Choose pictures from My Pictures, or videos from My

Videos to use as the background display for your home screen.

Choose pictures from My Pictures to use as the background display

for your Front Screen.

•Display

Themes

: Choose from 2 themes used for menu display.

• Main Menu Settings

: Choose from 3 main menu layout themes

for the menu display.

• Menu Font Size

: Choose Normal or Large for the menu display

font size.

•Dial

Fonts

: Choose a dialing font style and size.

•Clock

Format

: Choose digital or analog format for time display.

4. Select an option and press .

Banner

allows you to create your own personalized greeting that

appears in home screen. Or you can display the network to which

you are subscribed.

To create a personal banner:

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Banner. Press Personal Banner to

create a customized banner for your handset.

Note:

Press and hold to erase an existing banner, if necessary.

5. Enter a word or short phrase (18 characters or less) to

appear in the home screen. Press to save banner.

To turn on an ERI banner:

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Banner.

5. Press to set the ERI Banner for your handset.

6. Select On or Off and press .

Backlight

Set the

backlight

for the display or keypad to remain on for a

specified period of time or to remain on as long as the flip is

open.

Note:

Prolonged backlight use drains your battery faster.

u810.book Page 89 Friday, May 1, 2009 12:03 PM

Changing Your Settings 90

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Backlight. The menus listed appear in the

display.

•Display

: The following options are for the Main LCD.

–

Duration

: Can be set to 7 seconds, 15 seconds, 30 seconds, Always

On or Always Off.

–

Brightness

: Press the

Directional key left or right to adjust the

brightness.

•Keypad

: The following options are for the keypad.

–

Seconds

: The keypad is on for 7 seconds.

–

Seconds

: The keypad is on for 15 seconds.

–

Seconds

: The keypad is on for 30 seconds.

–

Always

: The keypad is always on.

–

Always

Off

: The keypad is always off.

5. Highlight a menu and press to enter the highlighted

option’s menu and change settings as desired.

Wallpaper

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Wallpaper.

5. Press Main Screen or Front Screen.

• Main Screen

: Choose My Pictures (allows you to select an image

from the My Pictures folder.) My Videos (allows you to select a video

from the My Videos folder.)

• Front Screen

: Choose My Pictures (allows you to select an image

from the My Pictures folder.) to select the wallpaper that will appear

in the main or front LCD display.

6. Select your desired picture or video and press .

Display Themes

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Display Themes.

u810.book Page 90 Friday, May 1, 2009 12:03 PM

5. Press the left soft key

Preview.

Press the

Directional key left or right to cycle through thumbnails of

the themes.

6. Press the left soft key

List

to return to the list. Make

your selection and press

SET

to save.

Main Menu Settings

Choose 3 preset main menu layout themes for the menu display.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Main Menu Settings.

•Tab

: Displays: Media Center, Messaging, Contacts, Recent Calls

and Settings & Tools menu icons on the menu screen.

•List

: Displays 9 menu listings on the menu screen.

•Grid

: Displays 9 menu icons in a matrix on the menu screen.

5. Highlight a main menu setting and press .

6. The

Main Menu Type

screen appears on the display. Select

from the following options:

• Productivity

: Choose Productivity to display: Media Center,

Messaging, Calculator, Email, VZ Navigator, Contacts, Recent Calls,

Mobile IM and Settings & Tools.

• Messaging

: Choose Messaging to display: Media Center,

Messaging, Contacts, Email, Mobile IM, My Ringtones, Recent

Calls, VZ Navigator and Settings & Tools.

7. Highlight a setting and press .

Menu Font Size

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Menu Font Size.

5. Select

Normal

Large

and press .

Dial Fonts

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Dial Fonts.

u810.book Page 91 Friday, May 1, 2009 12:03 PM

Changing Your Settings 92

5. Select

Style

Size

and press .

•Style

: Choose Normal, Rainbow, Quill Pen, or Sticky.

•Size

: Choose Normal or Large Only.

6. Press the Directional key left or right to highlight a

setting and press .

Clock Format

This menu allows you to have time displayed in digital or analog

format.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

4. Press Clock Format.

5. Press Main Clock. The following options appear in

the display.

•Analog

: Time appears in clock format.

• Large Analog

: Time appears in clock format in larger size.

• Digital 12

: Time appears in 12-hour digital format. Example:

8:00pm.

• Large Digital 12

: Time appears in 12-hour digital format in larger

size.

• Digital 24

: Time appears in 24-hour digital format. Example:

20:00.

• Large Digital 24

: Time appears in 24-hour digital format in larger

size.

•Dual Clock

: Time appears in 12-hour digital format with a user

selectable time zone above the current time zone.

Note:

While selecting a time zone, you can press the left soft key

Cities

to select from a list of cities. In

CDMA

mode, only Cities time and DST

setting can be set. In

GSM

mode, Home/Cities time and DST setting

can be set by pressing the Directional key up or down. Press the right

soft key

DST On

to turn DST

Off

•Off

: No time is displayed.

Note:

Press the right soft key

Color

to select from

White

Black

6. Press the Directional key left or right to view and

press to save the option.

To set the Front Clock display, use the following options:

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Display Settings

u810.book Page 92 Friday, May 1, 2009 12:03 PM

4. Press Clock Format.

5. Press Front Clock. The following options appear in

the display.

• Digital

: Time appears in 12-hour digital format. Example: 8:00pm.

•Analog

: Time appears in clock format with Roman numerals.

•Off

: No time is displayed.

Note:

Press the right soft key

Color

to select from

White

Black

6. Press the Directional key left or right to view and

press to save the option.

Phone Settings

Time & Date

Set the time and date for your phone.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press

Time & Date

. Use the keypad to enter the time

in the time field.

5. Press the Directional key to highlight the date field

and enter the date. Press

to save your settings.

Note:

Time and date can only be changed in GSM Mode.

Airplane Mode

With

Airplane Mode

on, all RF functions for your phone are

disabled, and you cannot use your phone to place or receive

calls.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press

Airplane Mode

. Select On or Off and press

Yes

at the “

WILL DISABLE ALL CALLS?

” prompt.

u810.book Page 93 Friday, May 1, 2009 12:03 PM

Changing Your Settings 94

Network Mode

Your phone is capable of operating in a number of countries on

both

CDMA

(Code Division Multiple Access) and

GSM

(Global

Systems for Mobile) networks. While in the United States or on

other CDMA roaming networks, use your phone in Verizon

CDMA

Mode

. Use your phone in

Global Mode

while in countries serviced

by GSM network. You must have a

SIM

card in order to select

GSM and Global Mode. For a complete list of countries, please

visit: www.verizonwireless.com/vzglobal.

Note:

When your phone is in Verizon (CDMA) mode, it does not necessarily

mean that you are on the Verizon Wireless Network. You may roam on

certain other carriers’ CDMA networks domestically and internationally

when your phone is in Verizon (CDMA) mode. For more information,

visit: www.verizonwireless.com.

Network mode

allows you to select from

CDMA

GSM

Global

network modes.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Network Mode.

5. Highlight either

CDMA Mode

GSM Mode

Global Mode

network setting and press .

Set Shortcuts

allows you to personalize menu settings for

Set My

Shortcuts

and

Set Directional Keys

. Choose menu settings for

each of the shortcut options under

Set My Shortcuts

. In addition,

you can personalize 3 Directional keys (up, down and left) with

Set Directional Keys

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Set Shortcuts.

...or from the home screen, press the Directional key right

to launch

My Shortcuts

and press the left soft key

Settings

•Set My Shortcuts

Choose from 42 menu settings for each of the

4 shortcut options.

• Set Directional Keys

Choose from 42 menu settings for the up,

left and down Directional keys.

u810.book Page 94 Friday, May 1, 2009 12:03 PM

To personalize

Set My Shortcuts

1. Highlight

Set My Shortcuts

and press . Highlight any of

the shortcut options (Shortcut 1, 2, 3 or 4) to change and

press .

2. Highlight any of the menu settings and press .

Note:

Press the right soft key Options to:

1. Reset Shortcut 1,2,3 or 4

or:

2. Reset My Shortcuts,

for resetting the shortcuts to default settings.

For default settings see “Directional Key Shortcuts” on page 38..

To personalize

Set Directional Keys

1. Highlight

Set Directional Keys

and press . Highlight any

of the Directional keys (Up, Left or Down) to change and

press .

2. Highlight any of the menu settings and press .

Note:

Press the right soft key Options for:

1. Reset Up, Left or Down Key

or:

2. Reset Directional Keys,

for resetting the keys to default settings.

For default settings see “Directional Key Shortcuts” on page 38..

Voice Commands

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press

Voice Command Settings

. For more

information, refer to “Voice Commands Settings” on

page 29.

Language

Change the display language from English to Spanish or vice

versa.

1. From the home screen, press

. Press the

Directional key right or left to highlight the Settings

& Tools menu. Press Phone Settings.

2. Press Language.

3. Select a language and press .

u810.book Page 95 Friday, May 1, 2009 12:03 PM

Changing Your Settings 96

Location

Note:

This feature is only available on the Verizon Wireless network.

The Location Global Positioning Service (GPS) setting identifies

your location to the network. You can fully enable this setting or

set GPS to work only in the case that you dial 911 from your

phone.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Location. The following options appear in

the display:

•Location

: GPS location setting is on wherever the feature is

available.

• E911

Only

: GPS location setting is on whenever you dial 911 only.

5. Highlight an option and press .

Current Country

For more information, refer to “Current Country” on page 132.

Phone Security

The

Phone Security

menu allows you to lock your phone, set

restrictions, and other security options.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Phone Security.

5. Enter the lock code (factory settings are the last four digits

of your telephone number) and press . The following

options appear in the display:

•Edit Codes

: Allows you to change the Lock Code for Phone Only or

Calls & Services.

• Restrictions

: Allows you to restrict the Location Setting (Lock/

Unlock Setting), Calls (Outgoing or Incoming calls), messages

(Outgoing or Incoming messages) and dial-up modems (Allow or

Block All).

• Phone Lock Setting

: Allows you to set the phone to Unlocked or

lock the phone On Power Up.

•Lock Phone Now

: Allows you to lock the handset.

u810.book Page 96 Friday, May 1, 2009 12:03 PM

•Restore Phone

: All settings are reset to factory default settings

and all user data is erased including pictures, videos, music,

messages, contacts, and downloaded applications stored on the

phone.

Edit Codes

The default lock code is the last four digits of your phone number.

Use

Edit Code

to change the code to a lock code of your choice.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press

Phone Security

. You’re prompted to enter the

lock code. The default lock code is the last four digits of

your telephone number.

5. Enter the Lock Code and press . Several security

menus appear in the display.

6. Press

Edit Codes

. The following options display:

• Phone Only

: Allows you to edit the lock code for only the handset.

• Calls & Services

: Allows you to edit the lock code for all Calls &

Services.

7. Highlight an option and press . At the “

ENTER NEW

CODE

” prompt, enter the new lock code and press . At

the prompt, confirm new lock code.

8. At the “RE-ENTER NEW CODE” prompt, re-enter lock code

and press .

“

PHONE ONLY CODE SET

” or “CALLS & SERVICES CODE SET”

message appears in display confirming your lock code changed.

Note:

Your phone does not allow you to view the lock code for obvious

security reasons. If you change the lock code, be sure to write down or

memorize the new code.

Restrictions

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Phone Security. You’re prompted to enter

the lock code. The default lock code is the last four digits

of your telephone number.

5. Enter the

Lock Code

and press . Several security

menus appear in the display.

u810.book Page 97 Friday, May 1, 2009 12:03 PM

Changing Your Settings 98

6. Press Restrictions.

7. Enter the

Lock Code

then press . The default lock code

is the last four digits of your telephone number. Choose

from the following options:

•

Location Setting

•

Calls

•

Messages

•

Dial-Up Modem

8. Highlight an option and press .

Phone Lock Setting

restricts the use of your phone with the

exception of emergency outgoing calls to 911. You must unlock

the phone to place or receive a call.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Phone Security. You’re prompted to enter

the lock code. The default lock code is the last four digits

of your telephone number.

5. Enter the Lock Code and press . Several security

menus appear in the display.

6. Press

Phone Lock Setting

. The following options

display:

• Unlocked

: If locked, unlocks the device or phone, depending on

your selection.

•On Power Up

: The Lock Code is required whenever you power up

the phone.

7. Select an option and press .

Lock Phone Now

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Phone Security. You’re prompted to enter

the lock code. The default lock code is the last four digits

of your telephone number.

5. Enter the

Lock Code

and press . Several security

menus appear in the display.

6. Press

Lock Phone Now

u810.book Page 98 Friday, May 1, 2009 12:03 PM

Your phone returns to the home screen. The Lock Code is

required immediately to access any functions.

Restoring Your Phone Memory to Factory Condition

Restore Phone,

returns all setup options to their factory default.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press

Phone Security

, and enter the lock code and

press .

5. Press Restore Phone. A prompt appears in the

display asking if you wish to restore default settings and

erase all user data including pictures, videos, music,

messages, contacts, and downloaded applications stored

on the phone.

6. Highlight Yes and press to restore default settings or

select No to return to the Security list.

Note:

After the phone power cycles back on, you must press *228 to

re-program your phone number.

Call Emergency Numbers in Lock Mode

In Lock Mode, you can dial 911 to place an emergency call.

Note:

If you dial 911, your phone dials the emergency number immediately

(no prompt).

SIM Security

The

SIM Security

menu allows you to select the security settings

for your SIM card.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

u810.book Page 99 Friday, May 1, 2009 12:03 PM

Changing Your Settings 100

4. Press

SIM Security

, and enter the lock code and

press . The screen displays the following options:

• Edit PIN Code

: Allows you to edit the PIN code. (PIN

number must be locked before editing.)

• PIN Lock

: Allows you to lock/unlock the PIN code.

•SIM Lock

: Allows you to lock/unlock the SIM code.

Note:

SIM Lock prevents your phone from using a non-Verizon SIM card. To

disable the SIM lock, you need to contact VZW Global Customer

Support (1-800-711-8300) for an authorized SIM Unlock code.

System Select

The

System Select

menu allows you to set your roaming options.

For more information, refer to “Roaming Options” on page 28.

NAM Select

Your phone provides the option of selecting between two NAMs

(Number Assignment Modules) or phone numbers. Select either

NAM1 or NAM2.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press NAM Select. The following options appear in

the display:

•

NAM Select

•

Auto NAM Select

5. Make your selection and press .

Quick Search

is an easy way to locate contacts in your Address

Book and Menu items.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press the Directional key

to highlight Quick

Search and press .

5. Press the right soft key Info to display detail

information about Quick Search. Press to return to

Quick Search Menu. Select On or Off and press .

u810.book Page 100 Friday, May 1, 2009 12:03 PM

101

Searching for a Contact

Note:

Quick Search must be turn on to perform the procedures listed below.

1. From the home screen, press the first three numeric keys

that correspond to the letters of the contacts name. For

example, to search for “Sally” you would enter:

2. Press the Directional key up to search for Contacts. If

a match is found, the name(s) appear in the display.

3. Press the key to call the contact.

Searching for a Menu Item

Note:

Quick Search must be turn on to perform the procedures listed below.

1. From the home screen, press the first three numeric keys

that correspond to the letters of the Menu item name.

For example, to search for “Inbox” you would enter:

2. Press the Directional key down to search for Menu

items. If a match is found, the menu item(s) appear in the

display.

3. Press the key to access the content of the menu item.

Call Settings

The

Call Settings

menu allows you to select the method for

answering incoming calls, setting redial options, setting data

options, voice privacy, and more.

Answer Options

The Answer Options menu allows you to select the method for

answering incoming calls.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

S A L

I N B

u810.book Page 101 Friday, May 1, 2009 12:03 PM

Changing Your Settings 102

4. Press Answer Options. The following options

appear in the display:

• Flip Open

: Calls are answered when the flip is opened.

•Any Key

: Calls are answered when any key is pressed.

• Auto with Handsfree

: Calls are answered automatically with a 5

second delay.

5. Highlight the method you wish to use for answering calls,

then press MARK. Press the right soft key

Mark All to select all options. Press the left soft key

Done.

Auto Retr y

Auto Retry

automatically redials voice/data calls after a preset

period of time.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

4. Press Auto Retry. The following options are:

• 10 Seconds

• 30 Seconds

• 60 Seconds

•Off

5. Select an option and press .

TTY

Your phone is fully TTY compatible. Connect the TTY equipment

to the headset jack. Before you can use your phone with a TTY

device, you’ll need to enable TTY functions in the phone.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings. Press TTY Mode. The

TTY Mode screen displays.

4. A warning appears in the display stating “ENABLING TTY

WILL DISABLE HEADSET AUDIO. CONTINUE?”

Highlight Yes and press to proceed to TTY MODE

screen. Highlight No and press to return to

Call

Settings

menu. Press the Directional key up or down

to select one of the following:

•TTY Full

• TTY + Talk (VCO)

•TTY + Hear (HCO)

u810.book Page 102 Friday, May 1, 2009 12:03 PM

103

•TTY Off

Press for your selection. TTY MODE SET screen displays.

One Touch Dial

You can use this option to enable or disable the speed dialing

feature.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

4. Press One Touch Dial. Select On or Off and press

For more information, refer to “Speed Dialing” on

page 55.

Voice Privacy

Note:

This feature is only available on the Verizon Wireless network.

Voice Privacy when enabled turns on advanced voice

encryption. Voice privacy can be set to On or Off.

1. From the home screen, press

. Press the

Directional key right or left to highlight the Settings

& Tools menu. Press Call Settings.

2. Press Voice Privacy. The following options appear:

•On

•Off

3. Select an option and press .

Data Settings

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

4. Press Data Settings. The following options appear

in the display:

•Data Off

: Phone operates in normal voice call mode.

• Data For Next Call

: Data call is enabled for next call only. Phone

will reset to Data Off mode after call.

• Data Until Powered Off

: Phone will remain in Data Mode until

phone is powered off.

5. Select an option and press .

u810.book Page 103 Friday, May 1, 2009 12:03 PM

Changing Your Settings 104

DTMF Tones

Use this menu to set DTMF settings to Normal, or Long.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

4. Press DTMF Tones. The following options appear in

the display:

•Normal

: Select for a normal tone.

•Long

: Select for an extended tone.

5. Select an option and press .

Call Waiting (in Network Mode GSM )

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

4. Press Call Waiting.

5. Select an option and press .

Caller ID Visibility (in Network Mode GSM )

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Call Settings.

4. Press Caller ID Visibility. The following options

appear in the display:

• Hide Number

: Select to hide Caller ID number.

•Show Number

: Select to show Caller ID number.

5. Select an option and press .

Assisted Dialing

For more information, refer to “Assisted Dialing” on page 23.

Memory

The Memory menu allows you to manage your Save Options (for

Pictures, Videos, and Sounds) on your Phone Memory or Card

Memory. You can also set the memory usage for pictures,

videos, music, sounds, and ringtones on your phone and

microSD™ card.

1. From the home screen, press

u810.book Page 104 Friday, May 1, 2009 12:03 PM

105

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Memory

. The following options are available:

•Save Options

: You can set your Pictures, Videos and Sounds to be

saved to either phone memory or card memory.

• Phone Memory

: Allows you to see the memory usage for

everything stored on your phone. The following options are

available:

–

Phone Memory Usage

: Displays the current memory usage and

allocation figures for the various applications and folders stored on the

phone. These include: Available, Used, Total, My Pictures, My Videos,

My Ringtones, My Music, My Sounds, Applications, and Pic/Video Msg.

–

My Pictures

: Pictures you have saved from a Picture message,

downloaded via the “Media Center” application, or taken using your

phone.

–

My Videos

: Video Clips you have saved from a Video message,

downloaded via the “Media Center” application, or taken using your

phone.

–

My Ringtones

: Ringtones you have downloaded via the “Media

Center” application.

–

My Music

: Music you have downloaded directly from the V CAST

Music catalog or music you have transferred from your PC using Sync

Music.

–

My Sounds

: Sounds you have downloaded, recorded using your

phone, or saved from a Picture message with Sound attached.

Note:

Your phone does not come with a microSD™ memory card. A card

must be purchased as an accessory. See your service provider for

more information.

•Card Memory

: Allows you to see memory usage of everything

stored on your microSD™ card. The following file options are

available for the removable microSD™ memory card:

–

Card Memory Usage

: Displays the current memory usage and

allocation figures for the various applications and folders stored on the

card. These include: Available, Used, Total, My Pictures, My Videos, My

Music, and My Sounds.

–

My Pictures

: Pictures you have saved from a Picture message or

taken using your phone.

–

My Videos

: Video Clips you have saved from a Video message or

taken using your phone.

–

My Music

: Music you have downloaded directly from the V CAST

Music catalog or music you have transferred from your PC using Sync

Music.

–

My Sounds

: Sounds you have recorded using your phone or saved

from a Picture message with Sound attached.

u810.book Page 105 Friday, May 1, 2009 12:03 PM

Changing Your Settings 106

Phone Info

The

Phone Info

menu allows you to view the software and

hardware information, your assigned number, and an icon

glossary for your phone.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Phone Info

. My Number is highlighted, press

䊳

Press CDMA Number to display the CDMA Mobile

Device and Identification numbers.

䊳

Press GSM Number to display the GSM Mobile Device

and Identification numbers.

Press to return to the

Phone Info

menu display.

4. Press

SW/HW Version to view the version of

software, PRL, ERI, Browser, Media Center, MSUI,

Hardware, and MEID on your phone.

5. Press Icon Glossary to view the list of icons with a

brief description.

6. Press to return to the Phone Info menu.

SIM Info

The

SIM Info

menu allows you to view the SIM ID number for your

phone.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

SIM Info

. The SIM ID number is displayed.

u810.book Page 106 Friday, May 1, 2009 12:03 PM

107

Section 9: Media Center

This section describes how to download and play music, tones,

and video. It also outlines how to take, record and store images

and videos, sounds, and ringtones using your phone.

Note:

All instructions on accessing or changing the features will begin from

the

Media Center

menu.

Media Center

Note:

See the Consumer Brochure or go online for more details.

The Media Center menu provides sub-menus to Music & Tones,

Picture & Video, Games, Mobile Web, Browse & Download and

Extras. You can also view memory info to see how much space

you’ve used (and have left) for stored media. Use the following

steps for each Media Center sub-menu.

NOTE

: The menu navigation instructions for this section uses the

default

Twilight

display theme,

Grid

menu layout.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press the right soft key Info.

3. Press App Memory to display the memory

available. Press the key to return.

4. Press Phone Memory to view the memory

Available

Used

, and the

Total

amount being used. Press

the key to return.

5. Press View Log to see the file transfer activity.

6. Press the key to return.

u810.book Page 107 Friday, May 1, 2009 12:03 PM

Media Center 108

7. Press Help to display a list of frequently asked

questions. Highlight an item and press to display help

text.

8. Press the key to return.

Media Center

This menu allows you to get new tunes and tones, record new

sounds, and set tunes and tones as your ringtone. It also allows

you to access your music files.

V CAST Music with Rhapsody

You can use the V CAST Music/Rhapsody option to download

music from the V CAST Music/Rhapsody catalog directly to phone

memory or to a removable memory card. Before downloading

music to your microSD™ memory card, be sure to format it as

described below.

Formatting a microSD™ Card using your Samsung Renown™

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Memory.

4. Press Card Memory.

5. Press the right soft key Options.

6. The Format Card option is highlighted. Press .

7. Highlight Yes and press to format microSD™ card.

Formatting a microSD™ Card using your PC

For best playback of songs stored to the microSD™ memory

card, reformat your memory card with PC format FAT32.

Note:

Any content currently stored on the microSD™ memory card will be

lost after this procedure is performed.

1. Insert the microSD™ memory card into an SD card

adapter.

2. Insert the SD card adapter into the SD card reader slot.

3. Plug the SD card reader into a USB port on your PC.

4. On your PC, go to your My Computer directory and

highlight the drive that represents the SD card reader.

5. Right click and select the Format option.

6. Under the File System option, select FAT32 and click the

Start button.

7. Your microSD™ memory card will be reformatted.

u810.book Page 108 Friday, May 1, 2009 12:03 PM

109

8. Remove the microSD™ card from the SD card reader and

insert it back into your phone. The My Music directory will

automatically be created on the microSD™ memory card

the first time that you access V Cast Music with

Rhapsody®/My Music/Sync Music from your phone.

Get New Ringtones

Use this option to download new ringtones from the Internet.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Music & Tones will be highlighted. Press .

3. Press Get New Ringtones.

4. Press Get New Applications.

5. You are connected to the Media Center catalog and

presented with available provider ringtone applications.

6. To return to the home screen, press the key.

My Ringtones

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Music & Tones is highlighted. Press .

3. Press My Ringtones.

4. Press Get New Ringtones to access the Media

Center catalog to download new ringtones. Or if you have

already downloaded ringtones, highlight your selection and

press . To return to the home screen, press the

key.

My Music

The Music Player can be used to play music files that you have

downloaded from the V CAST Music catalog or that you have

transferred from your PC using Sync Music. You can play your

music with the flip open or closed.

Playing Music with the Flip Closed

Note:

The touchpad keys (Rewind, Play and Fast Forward) are only active

when the Sub-Display is active. If the Sub-Display is not active, press

and hold one of the other external keys (Lock/Unlock Key, or Volume

Key) to activate the Sub-Display.

The touchpad responds to a light touch. Using excessive force when

pressing the touchpad keys may damage the touchpad.

u810.book Page 109 Friday, May 1, 2009 12:03 PM

Media Center 110

The external keys which you will use are labeled below.

1. From the home screen, with your flip closed, press and

hold the Play/Pause ( ) key. After the prompt, press

the Play/Pause ( ) key. Press the Play/Pause ()

key to

Play All

or press the Fast Forward ( ) key to

select

Shuffle

Playlists

or to select individual songs loaded

on your phone or memory card. Use the Rewind ()

key to scroll back to previous selections if necessary.

Note:

For more information, refer to “Playing Music with the Flip Open” on

page 110.

2. You can use the Fast Forward ( ) and Rewind ()

keys to skip to another song track. Press and hold the Fast

Forward ( ) and Rewind ( ) keys to forward or

rewind the current song.

Playing Music with the Flip Open

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Music & Tones will be highlighted. Press .

3. Press My Music.

4. The My Music screen appears in the display. The following

options appear in the display:

•Genres

: This option organizes your songs by music type (genre).

For example, Folk, Rock, Country, Classical, Soul, Unknown and so

on. Each folder will contain all songs within that genre.

•Artists

: This option organizes your songs by artist.

• Albums

: This option organizes your songs by album title. Even if

you only have one song from an album, a folder for the album will

display.

• Songs

: This option organizes your songs by song title. To add a

song to a playlist, press the right soft key

Options

and select

Add to playlist to place the song into one of your playlists.

• Playlists

: Any playlists that you have created are displayed in this

option. Press the left soft key

New

to create a new playlist.

With a playlist highlighted, press the right soft key

Options

add, view, edit, rename, create or erase the playlist.

•Inbox

: This repository is where alert notifications are received

when new music from a selected artist is available for download.

Fast Forward

Play/Pause

Rewind Key

Key

u810.book Page 110 Friday, May 1, 2009 12:03 PM

111

•Play

All

: This option will play all of your songs in list order.

• Shuffle

: This option will re-sort a playlist order.

5. While in the My Music library, press the left soft key

Shop to go to the V CAST Music catalog.

Press to go back to My Music library.

6. Select Songs and press or press Songs

7. Scroll down to a song and press the right soft key

Options, to select from the following options:

• Add to

playlist

: Add song to playlist.

• Listeners also liked

: Displays music other listeners reviewed and

liked.

•Move song

: Moves the song from the microSD™ card to the

phone and from the phone to the microSD™ card.

• Lock song

: Locks the selected file to prevent accidental deletion.

• Erase song

: Erases the selected file.

• Erase all songs

: Erases all songs.

• Song Info

: Displays Title, Artist, Album, Genre, Copyright, Length,

Size, Bit Rate, Format and License

• Rebuild Music Database

: refreshes library database.

8. Press the up/down Directional keys to highlight the

song you want to listen to and press PLAY to play the

song.

9. During song playback, press the right soft key

Options to switch to one of the following functions:

Note:

The song playing will automatically stop playing when this is done. To

resume playing of the song, press .

•Play All

: Selects all songs for playback.

• Shuffle

: Re-sorts the current playlist order.

• My Music

: Displays stored songs.

•Shop

: Allows you to shop for music.

• Listeners also liked

: Displays music other listeners reviewed and

liked.

•Help

: Displays the help menu.

10. During song playback, press the Directional key right

to advance to the next song track in the current playlist, or

press the Directional key left to skip to the previous

song track.

Creating a Playlist

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Music & Tones will be highlighted. Press .

3. Press My Music.

u810.book Page 111 Friday, May 1, 2009 12:03 PM

Media Center 112

4. Press Playlists.

5. The

CREATE PLAYLIST

prompts appears. Enter the name of

the playlist and press .

6. Highlight the song(s) to add to the new playlist and press

Mark

or the

left soft key

Mark All.

Press the

right soft key Done.

7. To return to the home screen, press the key.

Editing a Playlist

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Music & Tones will be highlighted. Press .

3. Press My Music and press Playlists.

4. Highlight the playlist you would like to edit and press the

right soft key Options. Highlight Edit

playlist and press .

5. To remove a song from the playlist, highlight the song and

press the left soft key Remove

6. To change the order of the songs in your playlist, highlight

a song and press

Move

. Then press the

Directional key up or down to move the song up or down in

the playlist order. When you are finished, press

Save.

7. To return to the home screen, press the key.

My Sounds

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Music & Tones will be highlighted. Press .

3. Press My Sounds.

4. Record New is highlighted. Press to launch the

RECORD NEW screen. Press OK to record.

5. During the recording, press STOP to stop and

automatically save the recording to My Sounds or press

the left soft key Pause to pause and resume the

recording appropriately. Press STOP to save sound.

u810.book Page 112 Friday, May 1, 2009 12:03 PM

113

V CAST Music with Rhapsody

(PC Subscription and

Downloads)

V CAST Music with Rhapsody

is a digital music service that lets

you listen to millions of songs from thousands of artists. Discover

new and old favorites in an extensive music catalog. Download

V CAST Music with Rhapsody

® to sync tracks, albums, and

playlists to your PC music library.

Sync Music

Sync your music from your PC to your

V CAST Music with

Rhapsody

(PC Subscription and Downloads)

* wireless phone.

Note:

*V CAST Over The Air Music downloads are not available. Music can be

purchased and downloaded via V CAST Music with Rhapsody®

through your PC. V CAST Music with Rhapsody® will work with

Windows Vista, XP, or 2000 (Only 32-bit versions of Windows are

supported.) Not available for Mac or Linux.

This option allows you to transfer music files from your PC. In

order to use this option, you must install

V CAST Music with

Rhapsody

®* on your PC.

1. Open V CAST Music with Rhapsody. Don’t have V CAST

MUSIC with Rhapsody? Download it for free at:

www.verizonwireless.com/music

2. Plug in the USB cable (purchased separately) to your phone

and connect it to a USB port on your PC.

Note:

A compatible USB cable (sold separately) is required for syncing.

3. From the main screen on your phone, the “

SYNC MUSIC V

CAST MOBILE PHONE

” display appears. Your phone should

display the message: “

Connected

”.

4. Drag and drop the song(s) you want to sync from My

Library, to your phone, listed under the Sources tab.

5. Once synchronization is complete, press the key

and disconnect the USB cable (purchased separately).

Picture & Video

This menu allows you to get new Pictures and Videos via Media

Center and V CAST Video or take new Pictures or Videos using

your phone’s camera/camcorder. You can also view the saved

pictures.

u810.book Page 113 Friday, May 1, 2009 12:03 PM

Media Center 114

V CAST Videos

V CAST, the next generation wireless technology that unveils a

whole new multimedia experience at your fingertips, provides

access to vibrant, full-color content from some of the biggest

names in entertainment. V CAST is your link to video on demand,

which allows you to view or download video clips that contain

breaking news, sports highlights, weather and more.

For additional information regarding V CAST Videos and its use,

see

www.verizonwireless.com

Note:

To access and download videos, you must have the icon

displayed.

Browsing, Selecting and Playing Video Clips

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. The V CAST Videos option is highlighted. Press .

4. Highlight the

V CAST Videos

category you want.

5. After choosing the category you want press . Choose a

sub category, if applicable and press .

6. Highlight a video. You may press the right soft key

Options

to read the description of the video clip.

7. To view the highlighted video, press VIEW.

8. Highlight Yes to accept charges, if applicable, and then

press . After connection and buffering occurs, the

video clip begins.

Downloading a Video Clip

1. Launch V CAST Videos and select a video you want to

save. For information about launching your video player

and choosing a video clip, review steps 1-5 of the previous

section, “Browsing, Selecting and Playing Video Clips”

above.

2. To download and save the highlighted video, press

SAVE. The video clip will be saved to My Video.

3. Highlight

Yes

to accept charges, if applicable, and then

press . The video download begins.

4. Once the download is completed, “

Download Complete.

Play video now?

” appears in the display.

5. Select

Yes

and press to view the video, or select

return to the V CAST Videos menu.

u810.book Page 114 Friday, May 1, 2009 12:03 PM

115

Note:

Not all video content available can be downloaded to your phone;

however, all content is available for viewing.

Deleting Video Clips

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press My Videos.

4. Highlight the video you want to erase and press the left

soft key Erase.

5. Highlight Yes when the confirmation screen displays, then

press .

Configure Alerts for New Video Clips

1. Launch V CAST Videos.

2. Press the right soft key Options.

3. Highlight Alerts and press .

4. Highlight Configure alerts and press .

5. Select the alert content you want, and press .

6. After reading terms, highlight Save to accept and press

, or highlight Cancel to decline and press .

Note:

Fees apply for text messages/alerts both sent and received.

Get New Pictures

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press Get New Pictures.

4. Press Get New Applications. Follow the on-

screen prompts to download pictures and wallpaper from

the Media Center server. Appropriate subscription charges

may apply.

My Pictures

My Pictures allows you to review the pictures taken with the

camera feature or downloaded and stored into your phone and/or

microSDTM card.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press My Pictures.

u810.book Page 115 Friday, May 1, 2009 12:03 PM

Media Center 116

4. Press the Directional key in any direction to highlight

a photo, and press VIEW to view the highlighted

picture. Press the right soft key Options to select

from the following options (depending on whether you

choose to highlight or highlight and view a photo):

•Send

: Launches the send submenu. Select one of the following:

–

Picture Message

: Allows you to send the image in a Picture Message.

–

To Online Album

Sends picture to VZW Online Album storage.

•Set As

: Set the picture as the Main Wallpaper, Front Wallpaper or

Picture ID.

• Take Picture

: Activates the camera.

• Get New Pictures

: Allows you to download pictures and wallpaper

from the Media Center server.

•Manage My Pics

: Launches the Manage My Pics submenu.

•Print

: Allows you to print the picture.

• Zoom

: Enlarges the picture with the option to rotate the picture.

•Rename

: Renames picture file name.

•Move

: Moves the picture to the memory card.

•Lock

: Allows you to lock the picture to prevent accidental deletion.

• Full View

: Enlarges the picture to the full screen size.

• File Info

: Provides the name, size, resolution, date and time to the

selected picture.

5. Highlight your selection and press .

Manage My Pics

allows you to organize your pictures. You can

create a slide show with selected pictures, move your pictures

from the phone’s internal memory to a microSD™ memory card

or from the memory card to the phone’s internal memory. You

can also erase selected pictures or lock them to prevent

accidental deletion.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press My Pictures.

4. Press the right soft key Options and press

Manage My Pics

: Select from the following options:

•Erase

: Allows you to erase selected picture files.

• Make Slide Show

: Allows you to create a slide show with selected

pictures.

•Print

: Allows you to print the picture.

•Move :

Allows you to move selected pictures. The following options

display:

u810.book Page 116 Friday, May 1, 2009 12:03 PM

117

–

To Card

: Allows you to move selected pictures from the phone’s internal

memory to the memory card. (Memory card needs to be inserted for

this option)

–

To Phone

: Allows you to move selected pictures to the phone’s internal

memory.

•Lock

: Allows you to lock selected pictures to prevent accidental

deletion.

•Unlock

; Allows you to unlock selected pictures.

5. Highlight your selection and press .

Make a Slide Show

Create a slide show with Make Slide Show.

Note:

To create a slideshow, you must have a minimum 4 pictures and a

maximum of 18.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press My Pictures. Press the right soft key

Options. Press

Manage My Pics

4. Press

Make Slide Show

5. Highlight the desired picture(s) and press

MARK

, or

press the right soft key

Mark All

then press left soft

key

Done

6. Press the right soft key

Options

and select

Preview

to preview the slide show. Press to return to

MAKE SLIDE SHOW

screen. Press

SAVE

to save the

slide show. Enter the name of the slide show where

prompted, and press . In the

MY PICTURES

screen, a

icon will appear in the upper left corner of the

thumbnail view of the slide show.

My Videos

My Videos allows you to review videos taken with the camcorder

feature or downloaded and stored into your phone and/or

microSDTM card. Video clips you save are stored in My Videos.

You can access video clips without launching the V CAST Videos

application and delete your saved video clips directly.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press My Videos.

u810.book Page 117 Friday, May 1, 2009 12:03 PM

Media Center 118

4. Press the Directional key to highlight a video and

press PLAY. While the video is playing, press the left

soft key

Mute

, to mute the sound if desired.

5. Press the right soft key Options to select from the

following options:

•My Videos

: Returns to the

My Videos

menu.

• File Info

: Displays the video Name, Rating (in fps), File Size,

Resolution, Duration, Date and Time.

•Help

: Displays the video player controls. Repeatedly pressing the

Directional key right or left, will place the cursor on each of the

control buttons and will display the function.

6. After playing the video, press to exit the playback

screen.

7. Press the right soft key Options to select from the

following options:

•Send

: Launches the send submenu. Select one of the following:

–

Video Message

: Allows you to send the video in a Video Message.

–

To Online Album

Sends videos to VZW Online Album storage.

• Record Video

: Activates the camcorder.

•V CAST Videos

: Launches the internet to get online videos.

• Set As Wallpaper

: Sets the selected user generated video as

wallpaper for the main display.

•Manage My Videos

: Launches the Manage My Videos submenu.

•Rename

: Allows you to rename user generated videos.

• File Info

: Provides the name, rating, size, resolution, duration, date

and time of the selected video.

8. Highlight your selection and press .

Video name

Volume indicator

(controlled by

volume key)

Previous (short press)

Reverse (long press)

Stop

Full screen view

Video length

Next (short press)

Forward (long press)

indicator

u810.book Page 118 Friday, May 1, 2009 12:03 PM

119

Manage My Videos

allows you to organize your videos. You can

move your videos from the phone’s internal memory to a

microSD™ memory card or from the memory card to the phone’s

internal memory. You can also erase selected videos or lock them

to prevent accidental deletion.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press My Videos.

4. Press the right soft key Options and press

Manage My Videos

: Select from the following options:

• Manage My Videos

: Launches the Manage My Videos submenu.

Select one of the following:

–

Erase

: Allows you to erase selected videos from the gallery except for

locked videos.

–

Move

: Allows you to move selected videos to:

To Card

: Allows you to move selected videos to the memory card.

(Memory card needs to be inserted for this option.)

To Phone

: Allows you to move selected videos to the phone’s internal

memory.

–

Lock

: Allows you to lock selected videos to prevent accidental deletion.

–

Unlock

; Allows you to unlock selected videos.

5. Highlight your selection and press .

Take Pictures

1. With the flip open, press the

Camera/Camcorder

key

on the right side of the phone.

2. Press the left soft key

My Pics

to view images

already saved to your phone.

Press the right soft key Options, to choose the

specific camera settings. Press the Directional key up

or down to advance to each setting category, and to make

selections within each category. The following categories

are available:

•Settings

: Allows you to customize your image settings.

–

Color Effects:

Allows you to set this option from the following

choices:

Normal, Black & White, Antique, Negative, Aqua

and

Green

–

White Balance

: Allows you to set this option from the following

choices: Auto, Sunny, Cloudy, Tungsten, or Fluorescent.

–

Memory

: Allows you to select the location for saved pictures. Save to

phone or microSD™ card.

–

Auto Name

: Turn Auto Name Off or On

–

Preview Mode

: Allows you preview the image in Full screen or

Standard screen.

u810.book Page 119 Friday, May 1, 2009 12:03 PM

Media Center 120

–

ISO

: Auto, 100, 200, or 400.

–

Metering

: Average, Center, Spot

–

Icon Display

: Allows you to hide or view the camera icons in the

display. Select Display All, Partial, Guideline, No Icons.

–

Sound Effect:

Allows you to select Ready Sound and/or Shutter

Sound.

Ready Sound

: The sound you hear before you capture the image.

Off, Say Cheese!, Look Here!, 1,2,3,!

Shutter Sound

: Allows you to select a shutter sound. Off, Shutter,

OK, Melody.

–

Reset Settings

: Return camera options to default settings.

•

Night Shot

Allows you to turn Night Shot Off or On.

•Self Timer

3 Seconds, 5 Seconds, 10 Seconds or Off.

• Quality

Fine

Normal, or Economy.

•Resolution

(1600x1200), (1280x960), (640x480), (320x240),

(160x120).

•Multi-Shot

Series Shot, Divided Shot or Panorama Shot.

• Camcorder

Switches from Camera to Camcorder

3. Press TAKE to capture a picture. Press the right soft

key Erase to delete it or press the left soft key

Save to save the picture to the gallery.

4. To exit the camera, press the key.

Taking a Picture with the flip closed

1. Press and hold the

Camera/Camcorder

key on

the right side of the phone. The external LCD will display:

“

SELECT TO

” and will show “Take Picture “ and “

Record

Video

”.

2. With “

Take Picture

” highlighted, press

Play/Pause

()

to select.

3. Press

TAKE

( ) or press the

Camera/Camcorder

key

to capture a picture. The picture is automatically

saved to

My Pics

Record Video

This menu launches the camcorder.

1. With the flip open, press and hold the

Camera/Camcorder

key on the right side of the phone. The

camcorder is now active.

u810.book Page 120 Friday, May 1, 2009 12:03 PM

121

䊳

Pressing the left soft key

Videos

previews previously

recorded or downloaded videos.

䊳

Pressing the right soft key Options will display the

specific video settings.

2. To view the specific video settings, press the right soft key

Options while the camcorder is active.

3. Press the Directional key up or down to advance to

each setting category. Press the Directional key right

or left to make selections within each category.

The following categories are available:

• Settings

Allows you to customize your video settings.

–

Color Effects

: Normal, Black & White, Antique, Negative, Aqua and

Green

–

White Balance

: Auto, Sunny, Cloudy, Tungsten, or Fluorescent.

–

Memory

: Allows you to select the location for saved videos. Save to

phone or microSD™ card.

–

Auto Name

: Allows you to set Auto Name to On or Off. The file is saved

and file name is selected automatically.

–

Icon Display

: Allows you to hide or view the camcorder icons in the

display when recording a video. Display All, Partial, No Icons.

–

Sound Effect

: Allows you to select the Start Sound and/or End Sound

Start Sound

: Set the start sound you will hear when you capture a

video. Beep, Look Here!, 1,2,3! or Off.

End Sound

: Set the end sound you will hear when you finished

capturing a video. Beep-beep-beep, Melody, Off or OK.

–

Reset Settings

: Return camcorder options to default settings.

• Recording Time

Limit for Send (up to 30 seconds), For Save (up to

10 minutes)

•Self Timer

3 Seconds, 5 Seconds, 10 Seconds or Off.

• Quality

Fine, Normal or Economy.

•Resolution

: (320x240) and (176x144)

•Camera

Switches from Camcorder to Camera

4. Press to save any changes you may have made to the

video settings.

5. Press REC to begin recording. Press the left soft key

Pause to pause the recording, then

Resume

resume the recording, or STOP.

6. Press the left soft key Save or the right soft key

Erase.

7. To exit the camcorder, press the key.

Note:

If you receive an incoming call while using your camcorder, the video

recording is stopped. You will be presented with the call Ignore /

Accept screen. If you ignore the call, then you are given the choice to

Save, Play or Erase the video. If you accept the call, then your video is

auto-saved and the camcorder application exits in the background.

u810.book Page 121 Friday, May 1, 2009 12:03 PM

Media Center 122

Note:

If the battery level becomes too low while you are recording, the

recording is stopped and the video is auto-saved. The low battery

indicator will be displayed and you will exit from the camcorder

application. If your battery is too low then the phone will power down

without saving the video.

Note:

If you receive a text message, a multi-media message or a voicemail

while you are recording, the video recording is stopped. You are given

the choice to View Now or View Later. If you choose later, you are given

the chance to Save, Play or Erase the video. If you want to view the

message now, the video is auto-saved and the camera application

exits in the background.

Recording a Video with the flip closed

1. With the flip closed, press and hold the

Camera/Camcorder

key on the right side of the phone.

2. “Take Picture” is highlighted, press Fast Forward ()

to highlight

Record Video

3. Press Play/Pause ()

to select.

4. Press the Play/Pause ()

REC

to record video.

5. Press the Play/Pause ()

STOP

to stop and save

recording.

6. The video is automatically saved to My Videos folder.

Online Album

Stores pictures and videos to your online album.

Note:

You must first setup your account on the Verizon Wireless website:

www.verizonwireless.com before establishing a connection.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Picture & Video.

3. Press Online Album. The VZW Online Album sign-

on screen displays.

4. Enter your Mobile Number and Password. Highlight

online album.

Games

Select from several fun and interesting applications or a broad

category of games that you can play on your phone.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Games.

3. Press Get New Applications.

u810.book Page 122 Friday, May 1, 2009 12:03 PM

123

4. Press the Directional key up or down to make a

selection and press .

5. Choose the charge

Either Subscription

Unlimited

, then

press . Follow in screen prompts to apply.

Mobile Web

Browse the Internet from your phone with

Mobile Web

Note:

This feature is not available everywhere.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Mobile Web.

Tip: Alternatively to launch the Verizon Wireless Mobile Web, press the

Directional key up.

3. The browser is launched and a pop up screen with

available applications is displayed. Press the

Directional key to browse the categories.

4. Once the desired category is highlighted, press to

enter the category list.

When you use Mobile Web, some of the keys operate differently

than during a normal phone call. It presents on-screen items in

any of the following ways:

•

Text or numeric input

•

Links (embedded in content)

•

Numbered options (some options may not be numbered)

•

Simple text

You can utilize the options or links by using the soft keys.

Browse & Download

Download applications that keep you in touch with the world,

keep you organized, and help you find the coolest spots.

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Browse & Download.

3. Get New Applications is highlighted. Press .

4. Highlight the application to download and press .

5. Follow on screen subscription prompts and press .

The download process begins. At the “App installed

successfully. Would you like to run it?” prompt, press Yes

to launch application, or No to return to category list.

u810.book Page 123 Friday, May 1, 2009 12:03 PM

Media Center 124

Note:

The Tools on the Go menu will display all downloaded applications,

with the most current download first.

Extras

1. From the home screen, press

. The Media

Center menu is highlighted. Press .

2. Press Extras.

3. Get New Applications is highlighted. Press .

4. Highlight the desired application to download and press

5. Follow on screen subscription prompts and press .

The download process begins. At the “App installed

successfully. Would you like to run it?” prompt, press Yes

to launch application, or No to return to category list.

u810.book Page 124 Friday, May 1, 2009 12:03 PM

125

Section 10: Tools

The topics covered in this section allow you to schedule

appointments, view the calendar, set an alarm, view time zones,

take notes, and perform simple math calculations.

Note:

All instructions on accessing or changing the features will begin from

the

SETTINGS AND TOOLS

menu.

Voice Commands

For more information, refer to “Voice Commands” on page 29.

Calculator

You can perform calculations, including addition, subtraction,

multiplication and division using your phone.

Normal

NOTE

: The menu navigation instructions for this section uses the

default

Twilight

display theme,

Grid

menu layout.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Calculator, Normal.

The Calculator opens.

4. Enter the first number in your equation using the keypad.

(Numbers can be up to fifteen digits long.)

5. Press the right soft key Operator to display a pop-

up menu which allows you to enter a Parenthesis or Power

if desired. Press the left soft key Clear or to

clear all data entered.

6. Press to change the sign for a number to a

negative.

7. Press to add a decimal point.

8. Use the Directional key to set the type of calculation

you wish to perform. Your choices are as follows:

• Up key

: [+] Addition

• Down key

: [-] Subtraction

• Right key

: [x] Multiplication

• Left key

: [÷] Division

9. Use the keypad to enter the second number into your

equation.

u810.book Page 125 Friday, May 1, 2009 12:03 PM

Tools 126

10. Press (

) to perform the calculation and view the

result.

Tip

Calculates the tip and determines how much each person should

pay.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Calculator, Tip. The

Tip Calculator opens.

4. Populate the following fields:

• Bill

: enter the amount of the bill.

•Tip

: enter the tip percentage.

•# Paying

: enter the amount of people paying.

Note: Press the key to enter a decimal point.

5. In the area below, the calculator will automatically display

the Tip, total bill including the tip, and the share of the bill

for each person.

Converter

The

Converter

menu provides the following conversion

categories:

•

Temperature

•

Length

•

Weight

•

Area

•

Volume

•

Currency

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Calculator, Converter.

4. Scroll to the conversion feature you wish to use and press

the key.

5. Press the Directional key left or right to select the

From units of money or measure for the quantity you want

converted.

6. Enter the quantity you want converted in the text box.

u810.book Page 126 Friday, May 1, 2009 12:03 PM

127

Note:

Press the key to enter a decimal point. Press to

change the sign for a number to a negative.

Press the Directional key left or right to select the To units

of money or measure for the quantity you want converted.

Calendar

Schedule up to eight events for any day by indicating each

event’s start and end time. Set alarms for events so that you can

be alerted before an event takes place. Events scheduled for

future dates automatically appear on your Today events schedule

for the present day.

Add a new event

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Calendar. The calendar

appears in the display with the current date highlighted.

4. To view available options, press the right soft key

Options

. A pop-up menu appears in the display that

contains the menu items.

• Weekly

: View the current week.

•Go To Date

: Go to any date that you specify.

•Go to Today

: View today’s events.

•Erase Old

: Select a past event to delete.

•Erase All

: Delete all events in your calendar.

• Send via Bluetooth

: Sends a selected event to another Bluetooth

enabled device.

5. Press the left soft key Add to add a new event.

6. The Appointment name field is highlighted. Enter the

name and press the Directional key down to move to

the following fields:

• Start Date

: Enter the start date for the event.

•Start Time

: Enter the start time for the event.

–

am/pm: Select from am or pm for the start time.

• End Date

: Enter the end date for the event.

• End Time

: Enter the end time for the event.

–

am/pm: Select from am or pm for the end time.

• Recurrence

: Select the frequency of the event.

•Alert

: Sets the alarm for the event. Select from Tone, Vibrate, or

Light Only.

• Reminder

: Set a reminder before the event. Select Off, Once, Every

2 Minutes, Every 15 Minutes.

u810.book Page 127 Friday, May 1, 2009 12:03 PM

Tools 128

•Alert Time

: Set the Alert Time to sound before the event takes

place.

7. Fill in and select event details by pressing the

Directional key in any direction and using the

alphanumeric keypad.

8. Press . The event is saved.

View an event

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Calendar.

4. A calendar appears in the display with the current date

highlighted.

5. Press the Directional key in any direction to highlight

the date containing the event that you wish to view or

press the right soft key Options.

In the pop-up menu that appears in the display, press the

Directional key up or down to highlight Go To Date,

then press .Enter the desired date in the box, then

press . The month that you entered appears in the

display with the event date highlighted.

6. Press VIEW to view event details for the date.

7. To edit the event, press

VIEW

, press the left soft key

Edit. Make changes, then press SAVE.

8. Press the right soft key Options. A pop-up menu

appears in the display.

9. To see the selected date in a month view, press

Monthly.

10. To see the selected date in a week view, press

Weekly.

11. To erase the current event, press Erase. A pop-up

menu appears with Yes highlighted. Press to erase, or

highlight No to cancel.

12. To send an event to another Bluetooth enabled device,

press

Send via Bluetooth

13. Press

MARK

or press the right soft key

Mark All

u810.book Page 128 Friday, May 1, 2009 12:03 PM

129

14. Press the left soft key

Done

. For more information on

sending a calendar event, see “Transferring vCalendar

events via Bluetooth” on page 86.

Alarm Clock

Your phone has an alarm clock that can be set to go off once, or

recur daily at a specific time. Once set, the alarm clock is easy to

change or turn off.

Set An Alarm

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Alarm Clock. The Alarm

Clock menu displays with Alarm 1 highlighted.

4. The following options appear in the display:

•

Alarm 1

•

Alarm 2

•

Alarm 3

5. Press the Directional key up or down to highlight the

alarm that you wish to enable, then press . The Set

Alarm (1, 2, or 3 depending on your selection) screen

appears in the display.

6. The Alarm field is highlighted. Select On or Off.

7. Highlight the Time field, then enter the time that you wish

for the alarm to sound.

8. Press the Directional key down once to highlight the

am/pm field. Press the Directional key left or right to

select am or pm.

9. Press the Directional key down once to highlight the

Frequency field. Press the Directional key left or

right to set the frequency (occurrence) of the alarm. Below

lists and defines the options for this field.

•Once

: The alarm sounds only once, at the time specified.

• Daily

: The alarm sounds every day at the time specified.

•Mon-Fri

: The alarm sounds Monday through Friday at the time

specified.

• Weekends

: The alarm sounds Saturday through Sunday at the

time specified.

u810.book Page 129 Friday, May 1, 2009 12:03 PM

Tools 130

10. Press the Directional key down once to highlight the

first Ringer field. Press the Directional key left or

right to set the ringer to Tone, Vibrate, or Light Only.

11. If you selected Tone, press the Directional key down

again to highlight the second field. Press the

Directional key left or right to set the alert tone to

VZW

Default Tone

, or select a tone from

My Ringtones

12. When all fields have correct information entered, press

SAVE to save your settings.

Disable an alarm before it sounds

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Alarm Clock. The Alarm

Clock menu displays with the Alarm 1 highlighted.

4. Highlight the alarm you wish to disable, then press the

right soft key Options. A pop-up menu appears in

the display.

5. Press Turn Off to turn the highlighted alarm off.

Press Reset to reset the highlighted alarm or press

Reset All to reset all of the alarms.

Snooze

Note:

When an alarm sounds, a menu screen displays that allows you to

either turn the alarm off or to have the alarm ring again after 5

minutes.

Stop Watch

This feature allows you to use a stopwatch. Press the

START

to start the stopwatch. Press STOP to stop stopwatch. Press

the right soft key Reset to erase recorded stopwatch time.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools

Stop Watch. Stop Watch

display appears.

4. Press the

START

to start the stopwatch.

5. Press the left soft key Record to record split times.

6. Press STOP to stop stopwatch.

u810.book Page 130 Friday, May 1, 2009 12:03 PM

131

7. Press the right soft key Reset to erase recorded

stopwatch time. To return to the home screen, press

World Clock

World Clock allows you to view the time of day or night in any

part of the world.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

World Clock.

4. Use the left soft key Cities to display the 45

supported cities. Select a city and press to view your

entry.

5. Press the right soft key Options to view these

options:

• Set As Local Time

: Sets the reference time zone according to the

city chosen in the Cities field.

• Turn DST On/Off

: Sets the Daylight Savings time option.

6. You can scroll through other cities by pressing the

Directional keys left or right.

Notepad

Create and store notes in Notepad. Return to Notepad anytime to

review and edit your notes.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Notepad.

4. If you have any stored notes, they appear as a list in the

display. If this is your first time in Notepad, No Notes

displays. To add a new note, press the left soft key

Add, then enter the note using the keypad.

5. While entering a note, press the left soft key Abc, to

display a pop-up menu with the following text entry modes

•

Word

•

Abc

•

ABC

•

123

•

Symbols

u810.book Page 131 Friday, May 1, 2009 12:03 PM

Tools 132

Tip:

Press and hold to cycle through text entry mode types (Word,

Abc, and 123).

Press to cycle between lower case, all caps, and initial caps.

6. Select a text entry mode and press or press to

exit the pop-up menu.

7. When you’re finished entering details for the note, press

. The note is saved.

Review, Edit, and Erase Notes

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press

Tools,

Notepad. The Notepad menu

opens. If you have any stored notes, they appear as a list in

the display.

4. With a note highlighted, press the right soft key

Options. A pop-up menu with the options listed in the

following table appears in the display:

•Edit

: Edit the note currently highlighted or appearing in the display.

•Erase

: Erase the note currently highlighted or appearing in the

display.

•Erase Notes

: Allows you to erase selected notes. Press

Mark

to mark a specific note to be erased or press the right soft

key

Mark All

. Press the left soft key

Done

erase the notes.

•Lock/Unlock

: Locks or unlocks the entry to prevent accidental

deletion.

5. Highlight an option or press to exit the menu.

6. Press to perform the highlighted option’s function.

Current Country

The

Current Country

menu allows you to select your current

location.

Note:

If you travel to a different country, the network may not report the

correct location. In that case, you will see a pop-up message that

states “

PLEASE VERIFY YOUR CURRENT LOCATION

”.

Press to access the country selection list.

1. From the home screen, press

2. Press the Directional key to highlight Settings

& Tools and press .

3. Press Phone Settings.

4. Press Current Country.

u810.book Page 132 Friday, May 1, 2009 12:03 PM

133

5. If your current location is not highlighted, press the

Directional key up or down to highlight the appropriate

country and press .

u810.book Page 133 Friday, May 1, 2009 12:03 PM

Dashboard with Mobile Web 2.0 134

Section 11: Dashboard with Mobile Web 2.0

This section outlines the mobile web options available.

Dashboard with Mobile Web 2.0

Dashboard is a graphically rich front end to all of Verizon

Wireless’ data products and services. It provides access to

Mobile Web 2.0 and quick and easy access to Verizon Wireless

information.

Note:

This feature is not available everywhere.

Any time the service indicator icon is visible, you are connected to the

Internet and billed accordingly. Rates and prices vary according to your

service contract. For further information on billing contact Verizon

Wireless.

Accessing Mobile Web 2.0

through Dashboard

Note:

This feature is not available everywhere.

1. From the home screen, press the Directional key up

to launch Dashboard.

2. The Mobile Web 2.0 channel is highlighted, press to

enter the channel.

3. Press the Directional key in any direction to browse

the categories.

4. Once the desired category is highlighted, press to

enter the category list.

Exit Dashboard with Mobile Web 2.0

To exit the Mobile Web, press the key.

Channels

Selecting a Channel

1. From the home screen, press the Directional key up

to launch Dashboard. A list of channels displays.

2. Use the Directional key to browse through the

channels.

3. Once the desired category is highlighted, press to

enter the selected category.

u810.book Page 134 Friday, May 1, 2009 12:03 PM

135

Adding a Channel

1. From the home screen, press the Directional key up

to launch Dashboard. A list of channels displays.

2. Use the Directional key to highlight

Get Channels

and

press .

3. Select the channel you want to add and press .

4. Confirm by pressing the right soft key

Add

Deleting A Channel

1. From the home screen, press the Directional key up

to launch Dashboard. A list of channels displays.

2. Select the channel you to delete and press the right soft

key

Options

3. Use the Directional key to highlight

Remove Channel

and press .

4. Press the left soft key

to confirm.

Options for Dashboard with Mobile Web 2.0

Press the right soft key to display the following options:

•

Select

: Opens the highlighted channel.

•

Channel Preferences

: Set channel preferences for highlighted

channel.

•

Remove Channel

: Deletes highlighted channel.

•

Get Channels

: Select to add new channels.

•

Refresh Channel Content

: Select to refresh channel content.

•

Preferences

: Set Volume, and Update preferences.

•

About

: Provides information about Dashboard.

•

Exit

: Select to return to idle mode.

u810.book Page 135 Friday, May 1, 2009 12:03 PM

Dashboard with Mobile Web 2.0 136

Navigate the Web

Note:

This feature is not available everywhere.

When you use Mobile Web, some of the keys operate differently

than during a normal phone call.

Mobile Web presents on-screen items in any of the following

ways:

–

Text or numeric input

–

Links (embedded in content)

–

Numbered options (some options may not be numbered)

–

Simple text

You can act on the options or links by using the soft keys.

Mobile Web Soft Keys

Note:

This feature is not available everywhere.

At the bottom of the Mobile Web display contains the browser

commands. The left and right soft keys on the

keypad are used to perform the commands in the display. These

are called “soft keys” because their function changes depending

where you are in the application.

How Mobile Web keys work

The following table lists Mobile Web keys and functions.

Directional Key: Press the directional

key in any direction to browse lists and

highlight options.

CLR Key: A browser back-up key. Press

once to back up one page. Press and

hold to go back to Mobile Web home

page.

Press to clear the last number, letter, or

symbol entered. Press and hold to

completely clear the display.

u810.book Page 136 Friday, May 1, 2009 12:03 PM

137

Numbers 1 - 9: Use the number keys to

select items in a menu if they are

numbered.

END Key: Press to exit Mobile Web and

return the phone to home screen.

Left Soft Key: Press the left soft key to

go to the highlighted web link and/or

perform the function above it in the

display.

Right Soft Key: The right soft key is the

Menu key. Press this key to display a

pop-up menu with several options.

SEND Key: Press to dial a highlighted

number.

Links

Note:

This feature is not available everywhere.

Links can serve several purposes, such as jumping to a different

page, to a different site, or initiating a phone call. Links are

underlined (__). Normally, the left soft key or is used

to select a highlighted link.

Place a Call While Using Dashboard with Mobile

Web 2.0

Note:

This feature is not available everywhere.

You can place a call while using Mobile Web if the website

supports this feature. Press the appropriate soft key to call the

number. In most cases you can also press to call the

number. The Internet connection terminates when you initiate the

call. After you end the call, the Resume Browser screen displays.

u810.book Page 137 Friday, May 1, 2009 12:03 PM

Health and Safety Information 138

Section 12: Health and Safety Information

This section outlines the safety precautions associated with using

your phone. These safety precautions should be followed to safely

use your phone.

Health and Safety Information

Exposure to Radio Frequency (RF) Signals

Certification Information (SAR)

Your wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed the exposure limits for

radio frequency (RF) energy set by the Federal Communications

Commission (FCC) of the U.S. government.

These FCC exposure limits are derived from the

recommendations of two expert organizations, the National

Counsel on Radiation Protection and Measurement (NCRP) and

the Institute of Electrical and Electronics Engineers (IEEE).

In both cases, the recommendations were developed by scientific

and engineering experts drawn from industry, government, and

academia after extensive reviews of the scientific literature

related to the biological effects of RF energy.

The exposure limit set by the FCC for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate (SAR). The SAR is a measure of the rate of

absorption of RF energy by the human body expressed in units of

watts per kilogram (W/kg). The FCC requires wireless phones to

comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).

The FCC exposure limit incorporates a substantial margin of

safety to give additional protection to the public and to account

for any variations in measurements.

SAR tests are conducted using standard operating positions

accepted by the FCC with the phone transmitting at its highest

certified power level in all tested frequency bands. Although the

SAR is determined at the highest certified power level, the actual

SAR level of the phone while operating can be well below the

maximum value. This is because the phone is designed to

operate at multiple power levels so as to use only the power

required to reach the network. In general, the closer you are to a

wireless base station antenna, the lower the power output.

Before a new model phone is available for sale to the public, it

must be tested and certified to the FCC that it does not exceed

the exposure limit established by the FCC. Tests for each model

phone are performed in positions and locations (e.g. at the ear

and worn on the body) as required by the FCC.

For body worn operation, this phone has been tested and meets

FCC RF exposure guidelines when used with an accessory that

u810.book Page 138 Friday, May 1, 2009 12:03 PM

139

contains no metal and that positions the handset a minimum of

1.5 cm from the body.

Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

The FCC has granted an Equipment Authorization for this mobile

phone with all reported SAR levels evaluated as in compliance

with the FCC RF exposure guidelines. The maximum SAR values

for this model phone as reported to the FCC are:

•

Head: 0.958 W/Kg.

•

Body-worn: 0.769 W/Kg.

SAR information on this and other model phones can be viewed

online at

http://www.fcc.gov/oet/ea

. To find information that

pertains to a particular model phone, this site uses the phone

FCC ID number which is usually printed somewhere on the case

of the phone.

Sometimes it may be necessary to remove the battery pack to

find the number. Once you have the FCC ID number for a

particular phone, follow the instructions on the website and it

should provide values for typical or maximum SAR for a particular

phone. Additional product specific SAR information can also be

obtained at

www.fcc.gov/cgb/sar.

Samsung Mobile Products and Recycling

Samsung cares for the environment and encourages its

customers to recycle Samsung mobile phones and genuine

Samsung accessories.

Go to:

https://fun.samsungmobileusa.com/recycling/index.jsp

for more

information.

UL Certified Travel Adapter

The Travel Adapter for this phone has met applicable UL safety

requirements. Please adhere to the following safety instructions

per UL guidelines.

FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD

TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY

DAMAGE

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE

INSTRUCTIONS.

DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

CAREFULLY FOLLOW THESE INSTRUCTIONS.

FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE

AN ATTACHMENT PLUG ADAPTOR OF THE PROPER

CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS

INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR

HORIZONTAL OR FLOOR MOUNT POSITION.

u810.book Page 139 Friday, May 1, 2009 12:03 PM

Health and Safety Information 140

Consumer Information on Wireless Phones

The U.S. Food and Drug Administration (FDA) has published a

series of Questions and Answers for consumers relating to radio

frequency (RF) exposure from wireless phones. The FDA

publication includes the following information:

What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless

phones with built-in antennas, often called "cell," "mobile," or

"PCS" phones. These types of wireless phones can expose the

user to measurable radio frequency energy (RF) because of the

short distance between the phone and the user's head. These RF

exposures are limited by Federal Communications Commission

safety guidelines that were developed with the advice of FDA and

other federal health and safety agencies.

When the phone is located at greater distances from the user, the

exposure to RF is drastically lower because a person's RF

exposure decreases rapidly with increasing distance from the

source. The so-called "cordless phones," which have a base unit

connected to the telephone wiring in a house, typically operate at

far lower power levels, and thus produce RF exposures well

within the FCC's compliance limits.

Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health

problems are associated with using wireless phones. There is no

proof, however, that wireless phones are absolutely safe.

Wireless phones emit low levels of radio frequency energy (RF) in

the microwave range while being used. They also emit very low

levels of RF when in the stand-by mode. Whereas high levels of

RF can produce health effects (by heating tissue), exposure to

low level RF that does not produce heating effects causes no

known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies

have suggested that some biological effects may occur, but such

findings have not been confirmed by additional research. In some

cases, other researchers have had difficulty in reproducing those

studies, or in determining the reasons for inconsistent results.

What is FDA's role concerning the safety of wireless

phones?

Under the law, FDA does not review the safety of radiation-

emitting consumer products such as wireless phones before they

can be sold, as it does with new drugs or medical devices.

However, the agency has authority to take action if wireless

phones are shown to emit radio frequency energy (RF) at a level

that is hazardous to the user. In such a case, FDA could require

the manufacturers of wireless phones to notify users of the

u810.book Page 140 Friday, May 1, 2009 12:03 PM

141

health hazard and to repair, replace or recall the phones so that

the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory

actions, FDA has urged the wireless phone industry to take a

number of steps, including the following:

•

Support needed research into possible biological effects of RF of the

type emitted by wireless phones;

•

Design wireless phones in a way that minimizes any RF exposure to

the user that is not necessary for device function; and

•

Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human

health.

FDA belongs to an interagency working group of the federal

agencies that have responsibility for different aspects of RF

safety to ensure coordinated efforts at the federal level. The

following agencies belong to this working group:

•

National Institute for Occupational Safety and Health

•

Environmental Protection Agency

•

Federal Communications Commission

•

Occupational Safety and Health Administration

•

National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency

working group activities, as well.

FDA shares regulatory responsibilities for wireless phones with

the Federal Communications Commission (FCC). All phones that

are sold in the United States must comply with FCC safety

guidelines that limit RF exposure. FCC relies on FDA and other

health agencies for safety questions about wireless phones.

FCC also regulates the base stations that the wireless phone

networks rely upon. While these base stations operate at higher

power than do the wireless phones themselves, the RF

exposures that people get from these base stations are typically

thousands of times lower than those they can get from wireless

phones.

Base stations are thus not the primary subject of the safety

questions discussed in this document.

What are the results of the research done already?

The research done thus far has produced conflicting results, and

many studies have suffered from flaws in their research

methods. Animal experiments investigating the effects of radio

frequency energy (RF) exposures characteristic of wireless

phones have yielded conflicting results that often cannot be

repeated in other laboratories. A few animal studies, however,

have suggested that low levels of RF could accelerate the

development of cancer in laboratory animals. However, many of

the studies that showed increased tumor development used

animals that had been genetically engineered or treated with

u810.book Page 141 Friday, May 1, 2009 12:03 PM

Health and Safety Information 142

cancer-causing chemicals so as to be pre-disposed to develop

cancer in absence of RF exposure. Other studies exposed the

animals to RF for up to 22 hours per day. These conditions are

not similar to the conditions under which people use wireless

phones, so we don't know with certainty what the results of such

studies mean for human health.

Three large epidemiology studies have been published since

December 2000. Between them, the studies investigated any

possible association between the use of wireless phones and

primary brain cancer, glioma, meningioma, or acoustic neuroma,

tumors of the brain or salivary gland, leukemia, or other cancers.

None of the studies demonstrated the existence of any harmful

health effects from wireless phones RF exposures.

However, none of the studies can answer questions about long-

term exposures, since the average period of phone use in these

studies was around three years.

What research is needed to decide whether RF exposure

from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies

of people actually using wireless phones would provide some of

the data that are needed. Lifetime animal exposure studies could

be completed in a few years. However, very large numbers of

animals would be needed to provide reliable proof of a cancer

promoting effect if one exists. Epidemiological studies can

provide data that is directly applicable to human populations, but

ten or more years' follow-up may be needed to provide answers

about some health effects, such as cancer.

This is because the interval between the time of exposure to a

cancer-causing agent and the time tumors develop - if they do -

may be many, many years. The interpretation of epidemiological

studies is hampered by difficulties in measuring actual RF

exposure during day-to-day use of wireless phones. Many

factors affect this measurement, such as the angle at which the

phone is held, or which model of phone is used.

What is FDA doing to find out more about the possible

health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and

with groups of investigators around the world to ensure that high

priority animal studies are conducted to address important

questions about the effects of exposure to radio frequency

energy (RF).

FDA has been a leading participant in the World Health

Organization international Electromagnetic Fields (EMF) Project

since its inception in 1996. An influential result of this work has

been the development of a detailed agenda of research needs

that has driven the establishment of new research programs

around the world. The Project has also helped develop a series of

public information documents on EMF issues.

u810.book Page 142 Friday, May 1, 2009 12:03 PM

143

FDA and Cellular Telecommunications & Internet Association

(CTIA) have a formal Cooperative Research and Development

Agreement (CRADA) to do research on wireless phone safety.

FDA provides the scientific oversight, obtaining input from

experts in government, industry, and academic organizations.

CTIA-funded research is conducted through contracts to

independent investigators. The initial research will include both

laboratory studies and studies of wireless phone users. The

CRADA will also include a broad assessment of additional

research needs in the context of the latest research

developments around the world.

What steps can I take to reduce my exposure to radio

frequency energy from my wireless phone?

If there is a risk from these products - and at this point we do not

know that there is - it is probably very small. But if you are

concerned about avoiding even potential risks, you can take a

few simple steps to minimize your exposure to radio frequency

energy (RF). Since time is a key factor in how much exposure a

person receives, reducing the amount of time spent using a

wireless phone will reduce RF exposure.

•

If you must conduct extended conversations by wireless phone every

day, you could place more distance between your body and the source

of the RF, since the exposure level drops off dramatically with distance.

For example, you could use a headset and carry the wireless phone

away from your body or use a wireless phone connected to a remote

antenna.

Again, the scientific data do not demonstrate that wireless

phones are harmful. But if you are concerned about the RF

exposure from these products, you can use measures like those

described above to reduce your RF exposure from wireless phone

use.

What about children using wireless phones?

The scientific evidence does not show a danger to users of

wireless phones, including children and teenagers. If you want to

take steps to lower exposure to radio frequency energy (RF), the

measures described above would apply to children and

teenagers using wireless phones. Reducing the time of wireless

phone use and increasing the distance between the user and the

RF source will reduce RF exposure.

Some groups sponsored by other national governments have

advised that children be discouraged from using wireless phones

at all. For example, the government in the United Kingdom

distributed leaflets containing such a recommendation in

December 2000.

They noted that no evidence exists that using a wireless phone

causes brain tumors or other ill effects. Their recommendation to

limit wireless phone use by children was strictly precautionary; it

u810.book Page 143 Friday, May 1, 2009 12:03 PM

Health and Safety Information 144

was not based on scientific evidence that any health hazard

exists.

Do hands-free kits for wireless phones reduce

risks from exposure to RF emissions?

Since there are no known risks from exposure to RF emissions

from wireless phones, there is no reason to believe that hands-

free kits reduce risks. Hands-free kits can be used with wireless

phones for convenience and comfort. These systems reduce the

absorption of RF energy in the head because the phone, which is

the source of the RF emissions, will not be placed against the

head. On the other hand, if the phone is mounted against the

waist or other part of the body during use, then that part of the

body will absorb more RF energy. Wireless phones marketed in

the U.S. are required to meet safety requirements regardless of

whether they are used against the head or against the body.

Either configuration should result in compliance with the safety

limit.

Do wireless phone accessories that claim to shield

the head from RF radiation work?

Since there are no known risks from exposure to RF emissions

from wireless phones, there is no reason to believe that

accessories that claim to shield the head from those emissions

reduce risks. Some products that claim to shield the user from RF

absorption use special phone cases, while others involve nothing

more than a metallic accessory attached to the phone. Studies

have shown that these products generally do not work as

advertised. Unlike "hand-free" kits, these so-called "shields"

may interfere with proper operation of the phone. The phone may

be forced to boost its power to compensate, leading to an

increase in RF absorption. In February 2002, the Federal trade

Commission (FTC) charged two companies that sold devices that

claimed to protect wireless phone users from radiation with

making false and unsubstantiated claims.

According to FTC, these defendants lacked a reasonable basis to

substantiate their claim.

What about wireless phone interference with

medical equipment?

Radio frequency energy (RF) from wireless phones can interact

with some electronic devices. For this reason, FDA helped

develop a detailed test method to measure electromagnetic

interference (EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test method is now

part of a standard sponsored by the Association for the

Advancement of Medical instrumentation (AAMI). The final draft,

a joint effort by FDA, medical device manufacturers, and many

other groups, was completed in late 2000. This standard will

allow manufacturers to ensure that cardiac pacemakers and

defibrillators are safe from wireless phone EMI. FDA has tested

u810.book Page 144 Friday, May 1, 2009 12:03 PM

145

wireless phones and helped develop a voluntary standard

sponsored by the Institute of Electrical and Electronic Engineers

(IEEE). This standard specifies test methods and performance

requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a compatible phone and

a compatible hearing aid at the same time. This standard was

approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for possible

interactions with other medical devices. Should harmful

interference be found to occur, FDA will conduct testing to assess

the interference and work to resolve the problem.

Additional information on the safety of RF exposures from various

sources can be obtained from the following organizations

(Updated 12/1/2006):

•

FCC RF Safety Program:

http://www.fcc.gov/oet/rfsafety/

•

Environmental Protection Agency (EPA):

http://www.epa.gov/radiation/

•

Occupational Safety and Health Administration's (OSHA):

http://www.osha.gov/SLTC/radiofrequencyradiation/index.html

•

National Institute for Occupational Safety and Health (NIOSH):

http://www.cdc.gov/niosh/homepage.html

•

World Health Organization (WHO):

http://www.who.int/peh-emf/

•

International Commission on Non-Ionizing Radiation Protection:

http://www.icnirp.de

•

National Radiation Protection Board (UK):

http://www.hpa.org.uk/radiation

•

US Food and Drug Administration

http://www.fda.gov/cellphones

Road Safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of wireless

phones, one that every user must uphold.

When driving a car, driving is your first responsibility. When using

your wireless phone behind the wheel of a car, practice good

common sense and remember the following tips:

1. Get to know your wireless phone and its features, such as

speed dial and redial. If available, these features help you

to place your call without taking your attention off the road.

2. When available, use a hands-free device. If possible, add

an additional layer of convenience and safety to your

wireless phone with one of the many hands free

accessories available today.

u810.book Page 145 Friday, May 1, 2009 12:03 PM

Health and Safety Information 146

3. Position your wireless phone within easy reach. Be able to

access your wireless phone without removing your eyes

from the road. If you get an incoming call at an

inconvenient time, let your voice mail answer it for you.

4. Let the person you are speaking with know you are driving;

if necessary, suspend the call in heavy traffic or hazardous

weather conditions. Rain, sleet, snow, ice and even heavy

traffic can be hazardous.

5. Do not take notes or look up phone numbers while driving.

Jotting down a "to do" list or flipping through your address

book takes attention away from your primary

responsibility, driving safely.

6. Dial sensibly and assess the traffic; if possible, place calls

when you are not moving or before pulling into traffic. Try

to plan calls when your car will be stationary. If you need to

make a call while moving, dial only a few numbers, check

the road and your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that

may be distracting. Make people you are talking with

aware you are driving and suspend conversations that

have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Dial 9-1-1 or other

local emergency number in the case of fire, traffic accident

or medical emergencies.

9. Use your wireless phone to help others in emergencies. If

you see an auto accident, crime in progress or other

serious emergency where lives are in danger, call 9-1-1 or

other local emergency number, as you would want others

to do for you.

10. Call roadside assistance or a special non-emergency

wireless assistance number when necessary. If you see a

broken-down vehicle posing no serious hazard, a broken

traffic signal, a minor traffic accident where no one

appears injured, or a vehicle you know to be stolen, call

roadside assistance or other special non-emergency

number.

u810.book Page 146 Friday, May 1, 2009 12:03 PM

147

"The wireless industry reminds you to use your phone safely when

driving."

For more information, please call 1-888-901-SAFE, or visit our

web-site

www.ctia.org

Important!:

If you are using a handset other than a standard numeric keypad,

please call 1-888-901-7233.

Provided by the Cellular Telecommunications & Internet

Association.

Responsible Listening

Caution!:

Avoid potential hearing loss.

Damage to hearing occurs when a person is exposed to loud

sounds over time. The risk of hearing loss increases as sound is

played louder and for longer durations. Prolonged exposure to

loud sounds (including music) is the most common cause of

preventable hearing loss. Some scientific research suggests that

using portable audio devices, such as portable music players and

cellular telephones, at high volume settings for long durations

may lead to permanent noise-induced hearing loss. This includes

the use of headphones (including headsets, earbuds, and

Bluetooth or other wireless devices). Exposure to very loud sound

has also been associated in some studies with tinnitus (a ringing

in the ear), hypersensitivity to sound and distorted hearing.

Individual susceptibility to noise-induced hearing loss and

potential hearing problem varies. Additionally, the amount of

sound produced by a portable audio device varies depending on

the nature of the sound, the device settings, and the headphones

that are used. As a result, there is no single volume setting that is

appropriate for everyone or for every combination of sound,

settings and equipment.

You should follow some commonsense recommendations when

using any portable audio device:

•

Set the volume in a quiet environment and select the lowest volume at

which you can hear adequately.

•

When using headphones, turn the volume down if you cannot hear the

people speaking near you or if the person sitting next to you can hear

what you are listening to.

•

Do not turn the volume up to block out noisy surroundings. If you

choose to listen to your portable device in a noisy environment, you

noise-cancelling headphones to block out background environmental

noise. By blocking background environment noise, noise cancelling

headphones should allow you to hear the music at lower volumes than

when using earbuds.

•

Limit the amount of time you listen. As the volume increases, less time

is required before you hearing could be affected.

u810.book Page 147 Friday, May 1, 2009 12:03 PM

Health and Safety Information 148

•

Avoid using headphones after exposure to extremely loud noises, such

as rock concerts, that might cause temporary hearing loss. Temporary

hearing loss might cause unsafe volumes to sound normal.

•

Do not listen at any volume that causes you discomfort. If you

experience ringing in your ears, hear muffled speech or experience

any temporary hearing difficulty after listening to your portable audio

device, discontinue use and consult your doctor.

You can obtain additional information on this subject from the

following sources:

Operating Environment

Remember to follow any special regulations in force in any area

and always switch your phone off whenever it is forbidden to use

it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device,

read its user's guide for detailed safety instructions. Do not

connect incompatible products.

American Academy of Audiology

11730 Plaza American Drive, Suite 300

Reston, VA 20190

Voice: (800) 222-2336

Email: info@audiology.org

Internet:

http://www.audiology.org

National Institute on Deafness and Other Communication Disorders

National Institutes of Health

31 Center Drive, MSC 2320

Bethesda, MD 20892-2320

Voice: (301) 496-7243

Email: nidcdinfo@nih.gov

Internet:

http://www.cdc.gov/niosh/topics/noise/default.html

National Institute for Occupational Safety and Health

Hubert H. Humphrey Bldg.

200 Independence Ave., SW

Washington, DC 20201

Voice: 1-800-35-NIOSH (1-800-356-4647)

Internet:

http://www.cdc.gov/niosh/topics/noise/default.html

u810.book Page 148 Friday, May 1, 2009 12:03 PM

149

As with other mobile radio transmitting equipment, users are

advised that for the satisfactory operation of the equipment and

for the safety of personnel, it is recommended that the

equipment should only be used in the normal operating position

(held to your ear with the antenna pointing over your shoulder if

you are using an external antenna).

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic equipment

may not be shielded against the RF signals from your wireless

phone. Consult the manufacturer to discuss alternatives.

Implantable Medical Devices

A minimum separation of six (6) inches should be maintained

between a handheld wireless phone and an implantable medical

device, such as a pacemaker or implantable cardioverter

defibrillator, to avoid potential interference with the device.

Persons who have such devices:

•

Should ALWAYS keep the phone more than six (6) inches from their

implantable medical device when the phone is turned ON;

•

Should not carry the phone in a breast pocket;

•

Should use the ear opposite the implantable medical device to

minimize the potential for interference;

•

Should turn the phone OFF immediately if there is any reason to

suspect that interference is taking place.

•

Should read and follow the directions from the manufacturer of your

implantable medical device. if you have any questions about using

your wireless phone with such a device, consult your health care

provider.

For more information see:

http://www.fcc.gov/oet/rfsafety/rf-faqs.html

FCC Hearing-Aid Compatibility (HAC)

Regulations for Wireless Devices

On July 10, 2003, the U.S. Federal Communications Commission

(FCC) Report and Order in WT Docket 01-309 modified the

exception of wireless phones under the Hearing Aid Compatibility

Act of 1988 (HAC Act) to require digital wireless phones be

compatible with hearing-aids.

The intent of the HAC Act is to ensure reasonable access to

telecommunications services for persons with hearing

disabilities.

While some wireless phones are used near some hearing devices

(hearing aids and cochlear implants), users may detect a

buzzing, humming, or whining noise. Some hearing devices are

more immune than others to this interference noise, and phones

also vary in the amount of interference they generate.

u810.book Page 149 Friday, May 1, 2009 12:03 PM

Health and Safety Information 150

The wireless telephone industry has developed a rating system

for wireless phones, to assist hearing device users find phones

that may be compatible with their hearing devices. Not all phones

have been rated. Phones that are rated have the rating on their

box or a label located on the box.

The ratings are not guarantees. Results will vary depending on

the user's hearing device and hearing loss. If your hearing device

happens to be vulnerable to interference, you may not be able to

use a rated phone successfully. Trying out the phone with your

hearing device is the best way to evaluate it for your personal

needs.

M-Ratings

: Phones rated M3 or M4 meet FCC requirements and

are likely to generate less interference to hearing devices than

phones that are not labeled. M4 is the better/higher of the two

ratings.

T-Ratings

: Phones rated T3 or T4 meet FCC requirements and are

likely to generate less interference to hearing devices than

phones that are not labeled. T4 is the better/higher of the two

ratings.

Hearing devices may also be rated. Your hearing device

manufacturer or hearing health professional may help you find

this rating. Higher ratings mean that the hearing device is

relatively immune to interference noise. The hearing aid and

wireless phone rating values are then added together. A sum of 5

is considered acceptable for normal use. A sum of 6 is

considered for best use.

In the above example, if a hearing aid meets the M2 level rating

and the wireless phone meets the M3 level rating, the sum of the

two values equal M5. This is synonymous for T ratings. This

should provide the hearing aid user with "normal usage" while

using their hearing aid with the particular wireless phone.

"Normal usage" in this context is defined as a signal quality that

is acceptable for normal operation.

The M mark is intended to be synonymous with the U mark. The

T mark is intended to be synonymous with the UT mark. The M

and T marks are recommended by the Alliance for

Telecommunications Industries Solutions (ATIS). The U and UT

marks are referenced in Section 20.19 of the FCC Rules.

M3 + M2 = 5 T3 + T2 = 5

u810.book Page 150 Friday, May 1, 2009 12:03 PM

151

The HAC rating and measurement procedure are described in the

American National Standards Institute (ANSI) C63.19 standard.

Other Medical Devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is adequately

shielded from external RF energy. Your physician may be able to

assist you in obtaining this information. Switch your phone off in

health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be

using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with the

manufacturer or its representative regarding your vehicle. You

should also consult the manufacturer of any equipment that has

been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices require

you to do so.

Potentially Explosive Environments

Switch your phone off when in any area with a potentially

explosive atmosphere and obey all signs and instructions. Sparks

in such areas could cause an explosion or fire resulting in bodily

injury or even death.

Users are advised to switch the phone off while at a refueling

point (service station). Users are reminded of the need to observe

restrictions on the use of radio equipment in fuel depots (fuel

storage and distribution areas), chemical plants or where blasting

operations are in progress.

Areas with a potentially explosive atmosphere are often but not

always clearly marked. They include below deck on boats,

chemical transfer or storage facilities, vehicles using liquefied

petroleum gas (such as propane or butane), areas where the air

contains chemicals or particles, such as grain, dust or metal

powders, and any other area where you would normally be

advised to turn off your vehicle engine.

Emergency Calls

This phone, like any wireless phone, operates using radio

signals, wireless and landline networks as well as user-

programmed functions, which cannot guarantee connection in all

conditions. Therefore, you should never rely solely on any

wireless phone for essential communications (medical

emergencies, for example).

Remember, to make or receive any calls the phone must be

switched on and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

u810.book Page 151 Friday, May 1, 2009 12:03 PM

Health and Safety Information 152

networks or when certain network services and/or phone

features are in use. Check with local service providers.

To make an emergency call:

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present location (for

example, 911 or other official emergency number).

Emergency numbers vary by location.

3. Press the key.

If certain features are in use (call barring, for example), you may

first need to deactivate those features before you can make an

emergency call. Consult this document and your local cellular

service provider.

When making an emergency call, remember to give all the

necessary information as accurately as possible. Remember that

your phone may be the only means of communication at the

scene of an accident; do not cut off the call until given

permission to do so.

Restricting Children's access to your Phone

Your phone is not a toy. Children should not be allowed to play

with it because they could hurt themselves and others, damage

the phone or make calls that increase your phone bill.

FCC Notice and Cautions

FCC Notice

The phone may cause TV or radio interference if used in close

proximity to receiving equipment. The FCC can require you to

stop using the phone if such interference cannot be eliminated.

Vehicles using liquefied petroleum gas (such as propane or

butane) must comply with the National Fire Protection Standard

(NFPA-58). For a copy of this standard, contact the National Fire

Protection Association, One Batterymarch Park, Quincy, MA

02269, Attn: Publication Sales Division.

Cautions

Any changes or modifications to your phone not expressly

approved in this document could void your warranty for this

equipment, and void your authority to operate this equipment.

Only use approved batteries, antennas and chargers. The use of

any unauthorized accessories may be dangerous and void the

phone warranty if said accessories cause damage or a defect to

the phone.

Although your phone is quite sturdy, it is a complex piece of

equipment and can be broken. Avoid dropping, hitting, bending

or sitting on it.

u810.book Page 152 Friday, May 1, 2009 12:03 PM

153

Other Important Safety Information

•

Only qualified personnel should service the phone or install the phone

in a vehicle. Faulty installation or service may be dangerous and may

invalidate any warranty applicable to the device.

•

Check regularly that all wireless phone equipment in your vehicle is

mounted and operating properly.

•

Do not store or carry flammable liquids, gases or explosive materials in

the same compartment as the phone, its parts or accessories.

•

For vehicles equipped with an air bag, remember that an air bag

inflates with great force. Do not place objects, including both installed

or portable wireless equipment in the area over the air bag or in the air

bag deployment area. If wireless equipment is improperly installed and

the air bag inflates, serious injury could result.

•

Switch your phone off before boarding an aircraft. The use of wireless

phone in aircraft is illegal and may be dangerous to the aircraft's

operation.

•

Failure to observe these instructions may lead to the suspension or

denial of telephone services to the offender, or legal action, or both.

Product Performance

Getting the Most Out of Your Signal Reception

The quality of each call you make or receive depends on the

signal strength in your area. Your phone informs you of the

current signal strength by displaying a number of bars next to the

signal strength icon. The more bars displayed, the stronger the

signal.

If you're inside a building, being near a window may give you

better reception.

Understanding the Power Save Feature

If your phone is unable to find a signal after searching, a Power

Save feature is automatically activated. If your phone is active, it

periodically rechecks service availability or you can check it

yourself by pressing any key.

Anytime the Power Save feature is activated, a message displays

on the screen. When a signal is found, your phone returns to

standby mode.

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When it's

turned on, it receives and transmits radio frequency (RF) signals.

When you use your phone, the system handling your call controls

the power level. This power can range from 0.006 watts to 0.2

watts in digital mode.

Maintaining Your Phone's Peak Performance

For the best care of your phone, only authorized personnel should

service your phone and accessories. Faulty service may void the

warranty.

u810.book Page 153 Friday, May 1, 2009 12:03 PM

Health and Safety Information 154

There are several simple guidelines to operating your phone

properly and maintaining safe, satisfactory service.

•

To ensure that the Hearing Aid Compatibility rating for your phone is

maintained, secondary transmitters such as Bluetooth and WLAN

components must be disabled during a call. For more information,

refer to

“Turning Bluetooth On or Off”

on page 84.

•

If your phone is equipped with an external antenna, hold the phone

with the antenna raised, fully-extended and over your shoulder.

•

Do not hold, bend or twist the phone's antenna, if applicable.

•

Do not use the phone if the antenna is damaged.

•

If your phone is equipped with an internal antenna, obstructing the

internal antenna could inhibit call performance.

•

Speak directly into the phone's receiver.

•

Avoid exposing your phone and accessories to rain or liquid spills. If

your phone does get wet, immediately turn the power off and remove

the battery. If it is inoperable, call Customer Care for service.

Availability of Various Features/Ring Tones

Many services and features are network dependent and may

require additional subscription and/or usage charges. Not all

features are available for purchase or use in all areas.

Downloadable Ring Tones may be available at an additional cost.

Other conditions and restrictions may apply. See your service

provider for additional information.

Battery Standby and Talk Time

Standby and talk times will vary depending on phone usage

patterns and conditions. Battery power consumption depends on

factors such as network configuration, signal strength, operating

temperature, features selected, frequency of calls, and voice,

data, and other application usage patterns.

Battery Precautions

•

Avoid dropping the cell phone. Dropping it, especially on a hard

surface, can potentially cause damage to the phone and battery. If you

suspect damage to the phone or battery, take it to a service center for

inspection.

•

Never use any charger or battery that is damaged in any way.

•

Do not modify or remanufacture the battery as this could result in

serious safety hazards.

•

If you use the phone near the network's base station, it uses less

power; talk and standby time are greatly affected by the signal

strength on the cellular network and the parameters set by the

network operator.

•

Follow battery usage, storage and charging guidelines found in the

user’s guide.

•

Battery charging time depends on the remaining battery charge and

the type of battery and charger used. The battery can be charged and

discharged hundreds of times, but it will gradually wear out. When the

u810.book Page 154 Friday, May 1, 2009 12:03 PM

155

operation time (talk time and standby time) is noticeably shorter than

normal, it is time to buy a new battery.

•

If left unused, a fully charged battery will discharge itself over time.

•

Use only Samsung-approved batteries and recharge your battery only

with Samsung-approved chargers. When a charger is not in use,

disconnect it from the power source. Do not leave the battery

connected to a charger for more than a week, since overcharging may

shorten its life.

•

Do not use incompatible cell phone batteries and chargers. Some Web

sites and second-hand dealers, not associated with reputable

manufacturers and carriers, might be selling incompatible or even

counterfeit batteries and chargers. Consumers should purchase

manufacturer or carrier recommended products and accessories. If

unsure about whether a replacement battery or charger is compatible,

contact the manufacturer of the battery or charger.

•

Misuse or use of incompatible phones, batteries, and charging devices

could result in damage to the equipment and a possible risk of fire,

explosion, leakage, or other serious hazard.

•

Extreme temperatures will affect the charging capacity of your battery:

it may require cooling or warming first.

•

Do not leave the battery in hot or cold places, such as in a car in

summer or winter conditions, as you will reduce the capacity and

lifetime of the battery. Always try to keep the battery at room

temperature. A phone with a hot or cold battery may temporarily not

work, even when the battery is fully charged. Li-ion batteries are

particularly affected by temperatures below

0 °C (32 °F).

•

Do not place the phone in areas that may get very hot, such as on or

near a cooking surface, cooking appliance, iron, or radiator.

•

Do not get your phone or battery wet. Even though they will dry and

appear to operate normally, the circuitry could slowly corrode and

pose a safety hazard.

•

Do not short-circuit the battery. Accidental short-circuiting can occur

when a metallic object (coin, clip or pen) causes a direct connection

between the + and - terminals of the battery (metal strips on the

battery), for example when you carry a spare battery in a pocket or

bag. Short-circuiting the terminals may damage the battery or the

object causing the short-circuiting.

•

Do not permit a battery out of the phone to come in contact with metal

objects, such as coins, keys or jewelry.

•

Do not crush, puncture or put a high degree of pressure on the battery

as this can cause an internal short-circuit, resulting in overheating.

•

Dispose of used batteries in accordance with local regulations. In some

areas, the disposal of batteries in household or business trash may be

prohibited. For safe disposal options for Li-Ion batteries, contact your

nearest Samsung authorized service center. Always recycle. Do not

dispose of batteries in a fire.

u810.book Page 155 Friday, May 1, 2009 12:03 PM

Health and Safety Information 156

Care and Maintenance

Your phone is a product of superior design and craftsmanship

and should be treated with care. The suggestions below will help

you fulfill any warranty obligations and allow you to enjoy this

product for many years.

•

Keep the phone and all its parts and accessories out of the reach of

small children.

•

Keep the phone dry. Precipitation, humidity and liquids contain

minerals that will corrode electronic circuits.

•

Do not use the phone with a wet hand. Doing so may cause an electric

shock to you or damage to the phone.

•

Do not use or store the phone in dusty, dirty areas, as its moving parts

may be damaged.

•

Do not store the phone in hot areas. High temperatures can shorten the

life of electronic devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone warms up to its

normal operating temperature, moisture can form inside the phone,

which may damage the phone's electronic circuit boards.

•

Do not drop, knock or shake the phone. Rough handling can break

internal circuit boards.

•

Do not use harsh chemicals, cleaning solvents or strong detergents to

clean the phone. Wipe it with a soft cloth slightly dampened in a mild

soap-and-water solution.

•

Do not paint the phone. Paint can clog the device's moving parts and

prevent proper operation.

•

Do not put the phone in or on heating devices, such as a microwave

oven, a stove or a radiator. The phone may explode when overheated.

•

If your phone is equipped with an external antenna, use only the

supplied or an approved replacement antenna. Unauthorized antennas

or modified accessories may damage the phone and violate

regulations governing radio devices.

•

If the phone, battery, charger or any accessory is not working properly,

take it to your nearest qualified service facility. The personnel there

will assist you, and if necessary, arrange for service.

u810.book Page 156 Friday, May 1, 2009 12:03 PM

157

Section 13: Warranty Information

Standard Limited Warranty

What is Covered and For How Long?

SAMSUNGTELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")

warrants to the original purchaser ("Purchaser") that SAMSUNG's

Phones and accessories ("Products") are free from defects in

material and workmanship under normal use and service for the

period commencing upon the date of purchase and continuing for

the following specified period of time after that date:

What is Not Covered?

This Limited Warranty is conditioned upon

proper use of Product by Purchaser. This Limited Warranty does

not cover: (a) defects or damage resulting from accident, misuse,

abuse, neglect, unusual physical, electrical or electromechanical

stress, or modification of any part of Product, including antenna,

or cosmetic damage; (b) equipment that has the serial number

removed or made illegible; (c) any plastic surfaces or other

externally exposed parts that are scratched or damaged due to

normal use; (d) malfunctions resulting from the use of Product in

conjunction with accessories, products, or ancillary/peripheral

equipment not furnished or approved by SAMSUNG; (e) defects or

damage from improper testing, operation, maintenance,

installation, or adjustment; (f) installation, maintenance, and

service of Product, or (g) Product used or purchased outside the

United States or Canada.

This Limited Warranty covers batteries only if battery capacity

falls below 80% of rated capacity or the battery leaks, and this

Limited Warranty does not cover any battery if (i) the battery has

been charged by a battery charger not specified or approved by

SAMSUNG for charging the battery, (ii) any of the seals on the

battery are broken or show evidence of tampering, or (iii) the

battery has been used in equipment other than the SAMSUNG

phone for which it is specified.

What are SAMSUNG's Obligations?

During the applicable warranty

period, SAMSUNG will repair or replace, at SAMSUNG's sole

option, without charge to Purchaser, any defective component

part of Product. To obtain service under this Limited Warranty,

Purchaser must return Product to an authorized phone service

Phone 1 Year

Batteries 1 Year

Leather Case 90 Days

Holster 90 Days

Other Phone Accessories 1 Year

u810.book Page 157 Friday, May 1, 2009 12:03 PM

Warranty Information 158

facility in an adequate container for shipping, accompanied by

Purchaser's sales receipt or comparable substitute proof of sale

showing the date of purchase, the serial number of Product and

the sellers' name and address. To obtain assistance on where to

deliver the Product, call Samsung Customer Care at 1-888-987-

4357. Upon receipt, SAMSUNG will promptly repair or replace the

defective Product. SAMSUNG may, at SAMSUNG's sole option,

use rebuilt, reconditioned, or new parts or components when

repairing any Product or replace Product with a rebuilt,

reconditioned or new Product. Repaired/replaced leather cases,

pouches and holsters will be warranted for a period of ninety (90)

days. All other repaired/replaced Product will be warranted for a

period equal to the remainder of the original Limited Warranty on

the original Product or for 90 days, whichever is longer. All

replaced parts, components, boards and equipment shall

become the property of SAMSUNG.

If SAMSUNG determines that any Product is not covered by this

Limited Warranty, Purchaser must pay all parts, shipping, and

labor charges for the repair or return of such Product.

WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED

HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND

SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND

THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY

OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO

THE PRODUCT, INCLUDING BUT NOT LIMITED TO:

•

THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY

PARTICULAR PURPOSE OR USE;

•

WARRANTIES OF TITLE OR NON-INFRINGEMENT;

•

DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;

•

THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS

CONTAINED THEREIN; OR

•

COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY

LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.

NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE

CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND

WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED

WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION

OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF

TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.

SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW

LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION

MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE

LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE

PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE

PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE

u810.book Page 158 Friday, May 1, 2009 12:03 PM

159

OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF

THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,

CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF

ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING

FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS

NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS

OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR

ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER

PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT

APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY

FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE

ORIGINAL PURCHASER OF THIS PRODUCT AND STATES

PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS

LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY

REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR

UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY

FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH

PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE

CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS

THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE

PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT

IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO

WARRANTIES OR REPRESENTATIONS AND THERE ARE NO

CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR

OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,

PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE

OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR

EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY

SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO

INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE

PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,

PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY

SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER

AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH

THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.

This Limited Warranty allocates risk of Product failure between

Purchaser and SAMSUNG, and SAMSUNG's Product pricing

reflects this allocation of risk and the limitations of liability

contained in this Limited Warranty. The agents, employees,

distributors, and dealers of SAMSUNG are not authorized to make

modifications to this Limited Warranty, or make additional

warranties binding on SAMSUNG. Accordingly, additional

statements such as dealer advertising or presentation, whether

oral or written, do not constitute warranties by SAMSUNG and

should not be relied upon.

u810.book Page 159 Friday, May 1, 2009 12:03 PM

Warranty Information 160

Precautions for Transfer and Disposal

If data stored on this device is deleted or reformatted using the

standard methods, the data only appears to be removed on a

superficial level, and it may be possible for someone to retrieve

and reuse the data by means of special software.

To avoid unintended information leaks and other problems of this

sort, it is recommended that the device be returned to Samsung’s

Customer Care Center for an Extended File System (EFS) Clear

which will eliminate all user memory and return all settings to

default settings. Please contact the

Samsung Customer Care

Center

for details.

Important!:

Please provide warranty information (proof of purchase) to

Samsung’s Customer Care Center in order to provide this service

at no charge. If the warranty has expired on the device, charges

may apply.

Customer Care Center:

1000 Klein Rd.

Plano, TX 75074

Toll Free Tel: 1.888.987.HELP (4357)

Samsung Telecommunications America, LLC

1301 East Lookout Drive

Richardson, Texas 75082

Phone: 1-800-SAMSUNG (726-7864)

Important!:

If you are using a handset other than a standard numeric keypad,

dial the numbers listed in brackets.

Phone: 1-888-987-HELP (4357)

reserved.

No reproduction in whole or in part allowed without prior written

approval. Specifications and availability subject to change

without notice.

u810.book Page 160 Friday, May 1, 2009 12:03 PM

161

Index

Numerics

1-touch dialing 55

2-touch dialing 55

3-touch dialing 56

Adding a New Contact Entry 47

Alarm clock

icon 17

snooze 130

turn off the alarm 130

Assisted Dialing 23

Battery

charging 7

indicator 5

installing 5

removing 6

Bluetooth 83

about 83

icons 16

Bluetooth Settings 85

Browse & Download 123

Calendar

add a new event 127

Call Functions

answering a call 24

Contacts 28

Recent Calls 24

roaming 28

Viewing Recent Call History 25

Call history

calls using 26

definition 24

deleting entry 27

icons 26

new contact 26

updating existing contact 26

Call Settings 101

answer options 101

auto retry 102

call waiting (in Network Mode GSM)

104

caller ID visibility (in Network Mode

GSM) 104

data settings 103

DTMF tones 104

one touch dial 103

voice privacy 103

Camera

Take Picture 119

Taking a picture with the flip

closed 120

Camera/Camcorder key 14

Change lock code 97

Changing Message Settings 79

Chat 82

Clear key 13

Clock Format 92

Command Keys 12

Contact List

finding a contact entry 54

Contacts

adding a new contact entry 47

deleting a contact entry 55

editing an existing contact entry 54

u810.book Page 161 Friday, May 1, 2009 12:03 PM

162

speed dialing 55

Creating and Sending PICTURE

Messages 62

Creating and Sending TXT Messages 60

Creating and Sending VIDEO

Messages 64

Current Country 132

Dashboard with Mobile Web 2.0 134

Dial Fonts 91

Dialing

one-touch 55

three-touch 56

two-touch 55

Dialing Emergency Numbers 22

Directional Keys 14

Disable alarm 130

Display

backlight 89

banner 89

language 95

screen icons 15

Display Settings 88

Display Themes 90

Drafts folder 75

Email 81

Emergency Calls in GSM Mode 22

Emergency Contacts 58

Adding Emergency Contacts 58

Unassign an Emergency Contact 59

End key 13

Entering Text 43

changing text entry mode 43

entering numbers 45

entering symbols 44

entering upper and lower case 44

using Word Mode 43

Extras 124

Finding a Contacts Entry 54

Finding My Phone Number 58

Games 122

Get New Picture 115

Get New Ringtones 109

Getting Started 4

understanding this user manual 4

GPS icon 16

Groups

creating 51

move entries from/to 50

send messages to 51

send Picture msg to 52

viewing 50

HAC 149

Health and Safety Information 138

Icons

alarm on 17

alarm only 16

Auto answer icon 17

u810.book Page 162 Friday, May 1, 2009 12:03 PM

163

display 15

silent mode 16

SSL icon 15

vibrate mode 16

Indicator

1X signal strength 15

airplane mode 15

battery strength 16

Bluetooth 16

Bluetooth Active 16

Bluetooth Connected 16

calendar event 17

D signal strength 15

data call 16

dormant 16

EV signal strength 15

EV1X signal strength 15

keys lock 16

location on 16

message 17

missed calls 17

no service 16

roaming 15

speakerphone 17

TTY 16

voice call 16

voice privacy 16

voicemail 17

Installing the Battery 5

Language setting 95

Left soft key 13

Links 137

Lock code, changing 97

Lock Mode

placing an emergency call 99

Lock phone 98

Main Menu Settings 91

Making a call 22

Manage My Pics 116

Manage My Videos 119

Media Center 107, 108

Memory 104

Menu Font Size 91

Menu Navigation 37

menu outline 38

Menu Number Accelerators 37

Message Folders 70

Drafts 75

erase options 78

inbox 70

Sent 73

Messages, receive in call 70

Messaging 60

types of messages 60

microSD Card

formatting 108

Mobile IM 81

Mobile Web 123

exit 134

links 137

navigate the web 136

soft keys 136

Mode

call answer 101

M-Ratings 150

My Music 109

playing music with the flip

closed 109

playing music with the flip open 110

u810.book Page 163 Friday, May 1, 2009 12:03 PM

164

My Name Card 56

My Ringtones 109

My Sounds 112

Non-Supported Battery 5

Notes and tips 4

Notes, description 4

Notes, editing 132

Online Album 122

Pause 49

hard pause 49

two-second pause 49

Phone Info 106

Phone Safety 148

Phone Settings 93

airplane mode 93

NAM Select 100

Network Mode 94

Set Shortcuts 94

SIM Security 99

System Select 100

time & date 93

Picture & Video 113

Place a call while using

Mobile Web 137

Placing GSM International Calls 22

call the U.S. from another

country 22

calling internationally from another

country (GSM only) 23

Playlist

creating a playlist 111

editing a playlist 112

Powering off 8

Powering on 8

Receive messages in call 70

Receive text messages 60

Receiving Picture Messages 67

Receiving Video Messages 68

Receiving Voice Messages 69

Record Video 120

Recording a video with the flip

closed 122

Reference Country - assisted dialing 23

Removing battery 6

Retrieving a Message 60

Return to last menu 37

Return to the previous menu 37

Reviewing sent 73

Right soft key 13

Roaming

definition 28

options 28

SAR values 138

Security

edit lock code 97

lock phone 98

voice privacy 103

Send a Voice Message to Members

of a Group 53

Send key 13

Sent, reviewing messages 73

Set an alarm 129

Set Shortcuts 94

Settings 83

backlight 89

banner 89

u810.book Page 164 Friday, May 1, 2009 12:03 PM

165

display settings 88

edit lock code 97

language 95

lock phone 98

phone security settings 96

Tools 83

signal strength icons 15

SIM Info 106

Snooze 130

Sounds 86

Alert Sounds 87

Call Sounds 86

Keypad Volume 88

Power On/Off 88

Service Alerts 88

Speakerphone Key 14

Speed dial, assigning 56

SSL 15

Standard Limited

Warranty 157

Store numbers, shortcuts 47

Storing numbers after a call 49

Sync Music 113

Text messages, receiving 60

Tip, description 4

Tools 83

Alarm Clock 83, 129

Calculator 83, 125

Calendar 83, 127

converter 126

Notepad 83, 131

Stop Watch 83, 130

Tip, calculator 126

view an event 128

Voice Commands 83, 125

World Clock 83, 131

Touch Keypad Lock 14

Transferring vCalendar events via Blue-

tooth 86

T-Ratings 150

TTY Mode 102

Turning Your Phone On and Off 8

Two-touch dialing 55

UL Certification 139

Understanding Your Address book

Using Contacts List 46

Understanding Your Contacts 46

Understanding Your Phone 9

display screen 14

features of your phone 9

Using the Battery 4

V CAST Music with Rhapsody® (PC

Subscription and Downloads) 113

V CAST Video

browsing/playing clips 114

configuring alerts 115

deleting clips 115

downloading clips 114

V CAST Videos

description 114

u810.book Page 165 Friday, May 1, 2009 12:03 PM

166

Video clips 114

View an event, calendar 128

View Multimedia Message Later 70

Visual VoiceMail 80

Voice Commands

description 30

digit dial 31

name dial 31

name lookup 35

phone status 34

send picture 33

send text 32

Voicemail 80

listening to 8

Receive 80

setting up 8

viewing messages 80

voicemail 17

Wall Charger 7

Wallpaper 90

Warranty Information 157

u810.book Page 166 Friday, May 1, 2009 12:03 PM

Samsung Renown Verizon Users Manual U810

SCH-U810 (Verizon Wireless) - User Manual verizon_wireless_u810_BH06_PM Free User Guide for Samsung SCH Series Mobile Phone, Manual - page6

Navigation menu

Versions of this User Manual:

Views

Navigation