Samsung Shr 8080 Users Manual 00769B_SHR 8162_ENG NEW.indb
SHR-7082 to the manual e3f62b16-af8a-48eb-93c2-8de0f5c217a6
2015-01-23
: Samsung Samsung-Shr-8080-Users-Manual-277745 samsung-shr-8080-users-manual-277745 samsung pdf
Open the PDF directly: View PDF 
.
Page Count: 120
| Download | |
| Open PDF In Browser | View PDF |
SHR-7080/7082/7160/7162 SHR-8080/8082/8160/8162 8 Channel/16 Channel DVR User’s Manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsungsecurity.com 00769B_SHR-8162_ENG-NEW.indb 1 2008-12-04 오전 10:13:18 overview Features This DVR (Digital Video Recorder) employs MPEG-4 video encoding for 8 or 16 channels of camera input and G.723 audio encoding for 16 channels, and supports simultaneous hard disc recording and playback. And also it supports network connectivity, providing remote monitoring from a remote PC by transferring video and audio data. ~ Provides convenient User Interface ~ 8/16 CH Composite Input Connectors ~ Supports CIF(S)/Half D1(M)/Full D1(L) recording formats ~ NTSC/PAL Compatible ~ Dual Codec enabling live transmission at all FPS changes depending on the bandwidths, and under all recording conditions ~ De-interlacing processor for better picture quality ~ HDMI enabling superior picture output quality ~ Display of HDD information and status by using HDD SMART ~ D1 Size (NTSC: 704*480, PAL: 704*576) Recording in 480 IPS speed (SHR-8XXX) ~ CIF(S) Size (NTSC: 352*240, PAL: 352*288) Recording in 480 IPS speed (SHR-7XXX) ~ 8/16-channel Loop Through Video port connection ~ Hard Disk overwrite function ~ Mass storage hard disk backup through high-speed USB 2.0 ~ Mass storage hard disk backup thorugh SATA ~ Backup function using USB 2.0 flash memory and external CD/DVD writer (Internal DVD writer is not available for SHR-7080/7160/8080/8160) ~ Simultaneous Record and Play of 8/16-channel video data ~ Various Search Modes (Search by time, event, backup, POS and motion detection) ~ Various Recording Modes (Time Lapse, Event, Scheduled Recording) ~ Extended Hard Disk Connection (USB 2.0, SATA) ~ Alarm Interface (Input: 8/16, Output: 4, Reset: 1) ~ Remote Monitoring function by Windows Network Viewer (Net-I/Web viewer) _ overview 00769B_SHR-8162_ENG-NEW.indb 2 2008-12-04 오전 10:13:18 Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. ! overview 3) 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. English _ 00769B_SHR-8162_ENG-NEW.indb 3 2008-12-04 오전 10:13:18 overview BEFORE START This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: ~ SEC retains the copyright on this manual. ~ This manual cannot be copied without SEC’s prior written approval. ~ We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual. ~ If you want to open the case of your system for checking problems, please consult the expert from the shop where you bought the product. ~ You may download open source codes from the following website: www.samsungsecurity.com. ~ Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this DVR, check the compatibility. Consult your provider for the compatibility list. Warning ❖ Battery Exchanging a wrong battery in your product may cause an explosion. Therefore you must use the same type of battery as the one being used in the product. The following are the specifications of the battery you are using now. ~ Normal voltage: 3V CALIFORNIA USA ONLY ~ Normal capacity: 170mAh This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA. ~ Continuous standard load: 0.2mA “Perchlorate Material - special handling may apply, ~ Operating temperature: -20°C ~ +85°C See www.dtsc.ca.gov/hazardouswaste/perchlorate.” (-4°F ~ +185°F) The rechargeable battery incorporated in this product is not user replaceable. For information on its replacement, please contact your service provider. ❖ System Shutdown Turning off the power while the product is in operation, or taking not permitted actions may cause damage to the hard drive or the product. Also it can cause a dysfunction to the hard disk while using the product. Please turn off the power using the Power button on the front of your DVR. After selectingin the pop-up menu, you can pull off the power cord. You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.) ❖ Operating Temperature The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F). This product may not work properly if you run right after a long period of storage at a temperature below the guaranteed one. When using the device after a long period of storage at low temperature, place the product at room temperature for a while and run it. Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F). Likewise, the hard drive may not work at a temperature below the guaranteed one. _ overview 00769B_SHR-8162_ENG-NEW.indb 4 2008-12-04 오전 10:13:18 Standards Approvals M ` This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 Package Contents ! overview of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit. Remote Control Mouse Power Cable NET-i Software / User’s Manual CD User’s Manual RS-485 connector port Remote Control Battery (AAA) Bracket Rack SATA Cable Audio extension cable (optional) English _ 00769B_SHR-8162_ENG-NEW.indb 5 2008-12-04 오전 10:13:22 overview Contents overview 2 installation 14 2 3 4 6 8 10 12 Features Important Safety Instructions Before Start Contents Part Names and Functions (Front) Part Names and Functions (Rear) Remote Control 14 Checking the installation environment 15 Rack Installation 15 HDD Addition connecting with other device 19 19 20 20 21 21 22 Connecting the Video, Audio, and Monitor Connecting the Network Connecting the USB Connecting External SATA HDD Connecting POS Device Connecting the Alarm Input/Output Connecting the RS-485 Device live 23 25 29 31 32 32 32 33 Getting Started Live Screen Configuration Live Mode SPOT OUT Zoom AUDIO ON/OFF Freeze Event Monitoring using the DVR 34 41 48 51 54 55 62 System Setup Setting the Device Setting the Recording Setting the Event Backup Network Configuration Controlling a PTZ device search & play 64 Search 67 Playback 19 23 34 64 _ overview 00769B_SHR-8162_ENG-NEW.indb 6 2008-12-04 오전 10:13:22 web viewer 68 92 appendix 94 Introducing Web Viewer Connecting Web Viewer Using Live Viewer Using Search Viewer Viewer Setup About ! overview backup viewer 68 69 71 77 81 91 92 SEC Backup Viewer 94 Product Specification 97 Product Overview 98 Default Setting 101 Troubleshooting 103 Open Source License Report on the Product English _ 00769B_SHR-8162_ENG-NEW.indb 7 2008-12-04 오전 10:13:23 overview Part Names and Functions (Front) 1 7080/8080 10 8 10 8 9 8 10 9 8 2 7 3 6 2 7 1 7162/8162 3 6 7 1 7082/8082 10 7 1 7160/8160 2 3 6 2 3 6 4 5 4 5 4 5 4 5 _ overview 00769B_SHR-8162_ENG-NEW.indb 8 2008-12-04 오전 10:13:28 Part Names Functions ALARM : Lights on when an event occurs. HDD : Displays the normal access to HDD. Upon access to HDD, LED repeats on and off. LED Indicator NETWORK : Displays both network connection and data transfer status. BACKUP : Displays when Backup is in progress. REC : Lights on when recording is in progress. ! overview PTZ : Sets PTZ Mode ON/OFF. ZOOM(TELE) : Sets the screen to the x2 digital zoom. Runs the TELE function in the PTZ Mode. Camera Control FREEZE(WIDE) : Runs the FREEZE function in the Live Mode. Runs the WIDE function in the PTZ Mode. BACKUP(VIEW) : Runs the BACKUP function. Runs the Preset View function in the PTZ Mode. SEARCH(PRESET) : Goes to the search screen. Runs the Preset Setup function in the PTZ Mode. REC Starts or ends the recording. &/( Step Rewind (& ) : Used for backward frame-by-frame search while in PAUSE. Fast Rewind (() : Used for quick backward search while in Play. (-x2,-x4,-x8,-x16,-x32,-x64) @ STOP : Used to stop the playback. +/# PLAY/PAUSE : Used to pause or resume the screen. )/* Fast Forward ()) : Used for quick forward playback. (x2, x4, x8, x16, x32, x64) Step Forward ( *) : Used for forward frame-by-frame search while in PAUSE. Direction & Select Button Used to change a value or move the cursor up/down/left/right (▲▼_ +). Selects a menu item or executes the selected menu. USB Port 1 & 2 Connects the USB devices. MODE Each button press in the Live Mode switches the screen to 16-, 9-, 4-, 6-, 8-, 13- split screen, PIP, and auto sequence mode in order. In play mode, each press of the button will switch the screen mode to 13-, 1-, 4-, 9-, and 16split in order. (1 live channel + (N-1) live channel) AUDIO Sets Audio ON/OFF. ALARM Cancels the ALARM LED and the audible alarm when the alarm is going off, and to remove the icon. MENU/RETURN Either goes to the system menu screen or moves to the upper menu from the lower menu. Channel Used to select channel numbers directly in the Live Mode, or numbers in the numeric input mode. Jog shuttle When a scroll bar appears in each menu, acts as a scrolling. In Play mode, - Jog : Pauses the playback and steps backward or forward. - Shuttle : Fast playback forward or backward. OPEN/CLOSE Used to open and close the DVR-RW disc tray. (available for SHR-7082/7162/8082/8162 only) Power Power LED : Displays the power ON/OFF status. Power Button : Used to turn the DVR ON/OFF. English _ 00769B_SHR-8162_ENG-NEW.indb 9 2008-12-04 오전 10:13:29 overview Part Names and Functions (Rear) 7080/7082 Rear 1 2 3 4 5 6 7 8 9 10 11 4 5 6 7 8 9 10 11 4 5 6 7 8 9 10 11 4 5 6 7 8 9 10 11 12 13 14 7160/7162 Rear 1 2 3 12 13 14 8080/8082 Rear 1 2 3 12 13 14 8160/8162 Rear 1 2 3 12 13 14 10_ overview 00769B_SHR-8162_ENG-NEW.indb 10 2008-12-04 오전 10:13:35 Part Names Functions Composite Video Signal Output Port (BNC type connector). AUDIO OUT Audio Signal Output Port (RCA jack). VGA VGA Video Signal Output Port. HDMI HDMI connector port. AUDIO IN Audio input signal port (RCA Jack) and port for optional audio extension cable. SHR-716x/816x (Audio 5~16CH) SHR-808x/708x (Audio 5~8CH) USB USB connector port. SATA 1/2 Ports used for external storage device connections. (SATA HDD) NETWORK NETWORK connector port. SPOT A live screen output port, separate from the VIDEO OUT. SPOT 1: Supports Single, 4-, 9-, 16-split, and Auto Sequence modes SPOT 2: Supports Single, 4-split, and Auto Sequence modes (only for 5 ~ 8 CH). SPOT 3: Supports Single, 4-split, and Auto Sequence modes (only for 9 ~ 12 CH). SPOT 4: Supports Single, 4-split, and Auto Sequence modes (only for 13 ~ 16 CH). ! overview VIDEO OUT SHR-8162/8160 : SPOT 1,2,3,4 SHR-8082/8080 : SPOT 1,2 SHR-7162/7160/7082/7080 : SPOT 1 RS-485 ALARM Used for RS-485 communication. (TX+, TX-, RX+, RX-) - ALARM IN 1~16(SHR-7160,7162,8160,8162): Alarm Input port. - ALARM IN 1~8(SHR-7080,7082,8080,8082): Alarm Input port. - ALARM RESET IN: Alarm Reset port. - ALARM OUT 1–4: Alarm Output port. LOOP OUT Used to transfer a video signal to other video devices. VIDEO IN Composite Video Signal Input Port (BNC type connector). AC 100-240V~ IN AC 100 ~ 230V (PAL) AC 110 ~ 220V (NTSC) English _11 00769B_SHR-8162_ENG-NEW.indb 11 2008-12-04 오전 10:13:37 overview Remote Control DVR Available after switching to DVR mode by pressing the [DVR] button on the remote control. SEARCH Displays the search menu． BACKUP Displays the Backup Menu. OPEN/CLOSE MODE Changes the screen mode． POWER Opens or closes the CD tray. DVR Activates the DVR function. Displays the Exit pop up screen． NUMBER [0~+10] Used as the numeric input keys, or displays a single channel． ID Skip Backward (by unit time), Slow Rewind, Slow Forward, Skip Forward (by unit time) Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key. Move Frame While paused, moves to the previous/next frame. FR, STOP, PLAY/PAUSE, FF T/W Zooms in or out． PTZ Displays or ends PTZ. SCROLL ,. Moves the menu scroll. MENU Goes to the system menu screen. Up/Down/Left/Right($%_ +)/ENTER Moves the cursor up/down/left/right, and runs the Select Menu． FREEZE Freezes the screen temporarily． ZOOM RETURN Returns to the previous screen. AUDIO Turns Audio on/off. ALARM Cancels the Alarm. Runs the digital zoom (x2) function. REC Starts or ends the live recording． VIEW Runs the View function in the PTZ mode． REC LOCK Selects the recording lock function. PRESET Displays the Preset Setup. Using the numeric buttons CHANNEL 1–9 Press each button between 1 to 9. CHANNEL 10 Press the [+10] button first, then press the 0 button again within 3 seconds. CHANNEL 11–16 Press the [+10] button first, then press any number between 1 to 6 within 3 seconds. 12_ overview 00769B_SHR-8162_ENG-NEW.indb 12 2008-12-04 오전 10:13:38 MONITOR Available after switching to Monitor mode by pressing the [MONITOR] button on the remote control. AUTO Selects the screen status automatically． ID RESET Initializes the ID value to 01. P.MODE Selects the screen mode． MONITOR ! overview POWER Turns the monitor power on/off． Activates the monitor function. NUMBER [0~9] Changes the system ID. ID Sets the ID. Select 2 digits from 0 ~ 9 while pressing the ID Key. +/- Adjusts the audio volume． MUTE Mutes the audio out. MENU Displays the Setup Menu． Up/Down/Left/Right($%_ +)/ENTER Moves the cursor up/down/left/right, and runs the Select Menu. FREEZE Screen Freeze． SOURCE Selects the input signal source. UNDER SCAN Displays the video screen within a screen． PIP Selects or deselects the PIP function. Using the Numeric buttons CHANNEL 1–9 Press any button among 1 to 9. Changing the Remote Control ID 1. Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00. 2. Enter 2 digits of your selection in order, while pressing the system [ID] button. 3. When ID input is done, press the system [ID] button again to check the setting. M ` If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed. Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 45) English _13 00769B_SHR-8162_ENG-NEW.indb 13 2008-12-04 오전 10:13:40 installation Please be noticed with the followings before you use the product. ~ ~ ~ ~ ~ ~ ~ ~ Do not use the product outdoor. Do not spill water or liquid in the connection part of the product. Do not impose the system to excessive shock or force. Do not pull out the power plug forcefully. Do not disassemble the product on your own. Do not exceed the rated input/output range. Use a certified power cord only. For the product with an input ground, use a grounded power plug. checKing the instaLLation environment ~ Samsung Digital Video Recorder (“DVR” hereinafter) is a state-of-art security device, and contains mass storage hard disk(s) and critical circuits inside. ~ When the temperature rises inside the product, the product may breakdown and the product life be shortened. Please pay attention to the following recommendations before installation. Temperature Unit: ºC One Year: 24HR X 365 DAY =8,760 HR Life (Unit: HOURS) The followings are the recommendations when Samsung DVR is installed on a rack. [Figure 1] 1. Please ensure that the rack inside is not sealed. 2. Please ensure the air is circulated through the inlet/outlet as shown in the picture. 3. If the DVR or other devices on a rack is to be stacked as in the picture, provide a suitable space or install a ventilating opening for air circulation. 4. For natural air convection, place the inlet at the bottom of the rack and the outlet on top. 5. It is strongly recommended that a fan motor is installed at the inlet and the outlet for air circulation. (Please fit a filter at the inlet to screen dust or foreign substances.) 6. Please maintain the temperature inside the rack or surrounding areas between 0°C ~ 40°C (32°F ~ 104°F) as shown in the figure 1. Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. B) Reduced Air Flow - Installation of the equipment in a rack should be such that the [Figure 2] amount of air flow required for safe operation of the equipment is not compromised. C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading. D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips). 1_ installation 00769B_SHR-8162_ENG-NEW.indb 14 2008-12-04 오전 10:13:52 racK instaLLation Loosen the screws on both sides (4 screws on each side) and install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides (4 screws on each side). ` Fix the screws not to be loosened by vibrations. You can install additional HDDs. Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the product. ! instaLLation hdd addition ` Number of HDDs supported : SHR-7082/7162/8082/8162: Default 1 HDD + Up to 4 HDDs added SHR-7080/7160/8080/8160: Default 1 HDD + Up to 5 HDDs added J ` Cautions for data loss (HDD care) Please pay attention so that the data inside the HDD is not damaged. Before adding a HDD, please check the compatibility with this DVR product. HDD is vulnerable to malfunction due to its sensitive nature against externalities or shocks during operation. Please ensure that the HDD is free from such shock or externalities. We are not liable for any damage to the HDD incurred by user’s carelessness or externalities. ` Cases might cause damage to HDD or recorded data To minimize the risk of data loss from a damaged HDD, please backup data as often as possible. Data may be lost due to external impacts during disassembly or installation of the DVR. HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during operation. HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation. cautions when adding a hdd 1. When adding a HDD, pay attention so that the cable does not get caught between unsuitable spaces or the cable’s insulation does not come off. . Pay attention so as not to lose the disassembly screws or accessories. ` If the screws or accessories are not put together, the product may breakdown or not operate properly. . Please check the HDD compatibility before adding a HDD. ` Please contact your nearest dealer to obtain the list of compatible devices. English _1 00769B_SHR-8162_ENG-NEW.indb 15 2008-12-04 오전 10:13:57 installation adding a hdd M ` Make sure to unplug the power cord from the wall outlet before proceeding with the installation. ` Number of HDDs to install : SHR-7082/7162/8082/8162 : Default 1 HDD + Up to 4 HDDs added SHR-7080/7160/8080/8160 : Default 1 HDD + Up to 5 HDDs added ` By factory default, the master unit is equipped with one HDD. The following instructions are when you have installed the maximum number of HDDs on the master unit. 1. First, loosen the screws in the left and right sides and remove the cover. Cover 1) if adding hdds to shr-7080, 7160, 8080 & 8160 M ` For SHR-7082/7162/8082/8162 models, see the following page. . Loosen the screws (x4) in the left/right and upper sides and remove the upper and lower brackets. Upper Bracket Lower Bracket . Install HDDs (x3) on the lower bracket and fix them with screws. ` The screw (UNC 6-32) to use in the installation comes with the HDD. Upper Bracket Add Add Lower Bracket ` Firmly secure the screw so that it can not get loose from such as vibration. . Install HDDs (x2) on the upper bracket and fix them with screws. Add Add Add Installed by default 1_ installation 00769B_SHR-8162_ENG-NEW.indb 16 2008-12-04 오전 10:14:01 . When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fix them with the provided screws. Upper Bracket Lower Bracket ! instaLLation . When the installation of additional HDDs is done, connect the power cable and connect the HDD signal cables (SATA Cable) to connectors ~ on the main board. ` You can check the HDD map directly on the DVR. Refer to “Storage Storage Device > HDD Map”. (Page 43) ` Note that the order of the HDD data cable is nothing to do with the operation. Just make arrangements of the connectors considering the length of each connector. 2) if adding hdds to shr-7082, 7162, 8082 & 8162 . Loosen the screws (x4) in the left/right and upper sides to remove the upper bracket and loosen the lower screws (x2) to remove the lower bracket. Upper Bracket Lower Bracket English _1 00769B_SHR-8162_ENG-NEW.indb 17 2008-12-04 오전 10:14:11 installation . Install a HDD (x1) on the lower bracket and fix it with screws. . Install HDDs (x3) on the upper bracket and fix them with screws. Upper Bracket Add Add Add Lower Bracket Installed by default Add . When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fix them with the provided screws. Upper Bracket Lower Bracket . When the installation of additional HDDs is done, connect the power cable and connect the HDD data cables (SATA Cable) to connectors ~ on the main board. ` Note that the number of a HDD data calbe is nothing to do with operation of the HDD. Just make arrangements of the connectors considering the length of each connector. . Check if the connectors are properly connected and there is no problem with wiring, and close the cover and fix it with screws. Cover 1_ installation 00769B_SHR-8162_ENG-NEW.indb 18 2008-12-04 오전 10:14:24 connecting with other device M ` The following figures are based on Model SHR-8162. Connecting the Video, Audio, and Monitor ! connecting with other device AUDIO IN VIDEO IN LOOP OUT SPOT AC 100-240V~IN AUDIO OUT USB 2.0 CONSOLE RS-232 NETWORK SATA VIDEO OUT (composite) VIDEO OUT (VGA) HDMI RS-485 / ALARM Connecting the Network Connecting to Internet through Ethernet (10/100/1000BaseT) RJ45 Ethernet Cable (Direct Cable) Back Bone Hub/Switcher Hub/Switcher Windows NET-i English _19 00769B_SHR-8162_ENG-NEW.indb 19 2008-12-04 오전 10:14:27 connecting with other device Connecting to Internet through ADSL RJ45 Ethernet Cable (Direct Cable) Phone(ADSL) Line ADSL MODEM Hub/Switcher Windows NET-i Connecting the USB 1. There are two USB ports at the front and one at the back of the product. . You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port. . If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device > Storage Device”. (Page 43) . This product supports hot-plugging, which connects/removes the USB device during the system operation. J ` The USB type HDD must be set as Master. ` If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR. Connecting External SATA HDD 1. There are two external SATA ports on the rear side of the product. . If an external SATA HDD is connected to the system, recognition and settings are available in “Menu > Device > Storage Device”. . The DVR supports Hot Plug function to allow connection and disconnection of SATA HDD devices while the system is in use. J ` Only one SATA HDD can be connected to an external SATA port. ` Use a cable shorter than 1 m for the external SATA HDD connections. 20_ connecting with other device 00769B_SHR-8162_ENG-NEW.indb 20 2008-12-04 오전 10:14:29 Connecting POS Device 1. You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with a RS-232C cable. . Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the button and set . (Page 45) ! connecting with other device Connecting the Alarm Input/Output The Alarm In/Out port at the back is composed of the following. 1. Alarm In/Out Port on 7080/7082/8080/8082 . Alarm In/Out Port on 7160/7162/8160/8162 ~ ALARM IN 1 ~ 8 (SHR-7080/7082/8080/8082) : Alarm Input Port ~ ALARM IN 1 ~ 16 (SHR-7160/7162/8160/8162) : Alarm Input Port ~ ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing. ~ ALARM OUT 1 ~ 4 : Alarm Output Port ALARM OUT ALARM IN ALARM IN English _21 00769B_SHR-8162_ENG-NEW.indb 21 2008-12-04 오전 10:14:29 connecting with other device Connecting the RS-485 Device Connect the RS-485 device through the back port. M ` For example, you can connect and control the PTZ camera which supports the RS-485 communication. PTZ device ~ Transfer Type : You may select either Half Duplex or Full Duplex as the data transfer type. ~ Baud Rate : Supported Baud rates are 600/1200/2400/ 4800/9600/19200/38400. M Rear Half Duplex Type Data (–) Data (+) Tx(–) Tx(+) ` Check if the RS-485 device is compatible with the product first. ` Pay attention not to change the polarity (+/-) of the RS-485 device when connecting it. ` Depending on camera’s type, connection polarity can be different. For further information, refer to the respective PTZ Camera’s documentation. ` Ex : DVR(TX+/-) SCC-C6433,35(RX+/-) Full Duplex Type Rx(+) Rx(–) Tx(–) Tx(+) Rx(–) Rx(+) DVR(TX+/-) SCC-C6403,07(TX+/-) 22_ connecting with other device 00769B_SHR-8162_ENG-NEW.indb 22 2008-12-04 오전 10:14:30 live getting started starting the system ! Live 1. Connect the power cable of the DVR to the wall outlet. . Press the Power button on the front panel. . You will see the initialization screen. The initialization process will last about 1 minute in the order of icons appeared. If a new HDD is installed, the initialization process may take a longer time. . The live screen appears with a beep. shutting down the system You can shut down the system only if you have logged in to the DVR. You should have the permission to shut down the system if you are not an admin. 1. Press the [power] button on the remote control or the front panel, or right-click to display the context sensitive menu and select . . The “shutdown” confirmation window appears. . Use the arrow keys on the remote control or the front panel to move to and press the [enter] button or click . The system will shut down. M Shutdown Are you sure to shutdown? OK Cancel ` For the permission management, refer to “Permission Management > Setting Permissions”. (Page 38) English _ 00769B_SHR-8162_ENG-NEW.indb 23 2008-12-04 오전 10:14:33 live Login To access a DVR or restricted menu, you should have logged in to the DVR. 1. In live mode, right-click any area of the screen. You will see the context sensitive menu as in the right figure. Scene Mode Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Launcher hide Login . Click . The login dialog appears. You can also see the login dialog to access a desired menu by pressing the [menu] button on the remote control or the front panel. ` The login dialog will also appear if you press a menu button on the remote control or the front panel of the DVR when the corresponding menu requires logging in. M Login ID admin Password OK Cancel ` For the restricted permission, refer to “Permission Management > Setting Permissions”. (Page 38) _ live 00769B_SHR-8162_ENG-NEW.indb 24 2008-12-04 오전 10:14:35 Live Screen Configuration Icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. 2009-01-01 00:00:01 ! live CAM 01 Name Current Date, Time Login Information Description Displays the current time and date. When you are logged in, the “LOG ON” icon will be displayed. Displayed if the zoom function is activated. Displayed if you press the Pause button. Screen Mode Displayed in Auto Sequence mode where all channels are switched at the specific time interval. Displayed if the recording is in process. M To cancel the recording, enter the password. Displayed if there is a problem with the cooling fan. Displayed if the HDD is full and the DVR has an insufficient space to record. System Operation Displayed if no HDD is installed or the existing HDD should be replaced. Displayed if the HDD needs a technical examination. Displayed if a new firmware is found from the network. Video Input Status Camera Name/ Channel Displayed if no input is entered in the condition that the camera is set to . Nothing will be displayed on the screen if the camera is set to . Displays the camera name and the changed channel, if any. Displays the resolution of the recording screen. (Page 50) Displayed in PTZ setting, and highlighted yellow if PTZ is in operation. Camera Operation Displays AUDIO ON/MUTE. Not displayed in video mode if deactivated. If the sensor is set to , the input signal will be displayed on the screen of the connected channel. Displayed if a motion detected in the condition that the motion detection is set to . Displays the current record mode from Record/Event/Schedule. English _25 00769B_SHR-8162_ENG-NEW.indb 25 2008-12-04 오전 10:14:39 live error information ~ If you turn on the system in the condition that the internal HDD is not connected or an error occurs, the “HDD FAIL” icon ( ) will be displayed on the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup. ~ If the cooling fan does not work properly or has a problem, the window will appear and the fan error icon ( ) will be displayed on the top left corner. In this case, check the internal fan for operations. As a fan error can shorten the product life, make sure you contact the service center for assistance. M ` If you see the fan error icon or No HDD, HDD FAIL icons on the screen, contact the service center for more details. Live screen menu In addition to the buttons on the front panel or the remote control, you can access a desired menu by rightclicking any area in live mode. The context sensitive menu appearing by right-clicking the screen differs, depending on the login/logout, screen split mode and DVD operation mode. M ` Menu items of Search, Record, Backup, Shutdown and PTZ can be deactivated, depending on the user permission. Scene Mode Scene Mode PTZ Control Audio Off ZOOM Freeze Audio Stop Alarm Freeze Record Stop Alarm Play Record Search Play Backup Search Main Menu Backup Shutdown Main Menu Shutdown Launcher hide Launcher hide Login Login PTZ Alarm Freeze < Single Mode Menu > < Split Mode Menu > split mode menu The context sensitive menu in split mode differs, depending on the login/logout status. 1 1 11 10 9 1 Scene Mode SPOT OUT Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Launcher hide Logout _ live 00769B_SHR-8162_ENG-NEW.indb 26 2008-12-04 오전 10:14:43 Menu Description Refer to “Live Mode”. (Page 29) SPOT OUT Refer to “SPOT OUT”. (Page 31) Audio On/Off Refer to “Audio ON/OFF”. (Page 32) Freeze Refer to “Freeze”. (Page 32) Stop Alarm Stops the alarm output and the event monitoring. Refer to “Event Monitoring”. (Page 33) Record/Stop Starts/stops the standard recording. Play Plays the search result (data). Refer to “Search & Play > Play”. (Page 67) Search Refer to “Search & Play > Search”. (Page 64) Backup Refer to “Using the DVR> Setting the Backup”. (Page 54) Main Menu Accesses the main menu. Refer to the Using the DVR section. (Page 34) Shutdown Turns down the DVR. Launcher Show/Hide Shows or hides the launcher. Refer to “View the Launcher Menu”. (Page 28) Login/Logout You can log in or out. ! Live Scene Mode single mode menu The single mode menu is available only in the Single mode. The context sensitive menu of the One Channel mode in Split mode is different from that of the Single mode. 1 Full Screen SPOT OUT PTZ Control ZOOM Audio Freeze Stop Alarm Record Play Shutdown Launcher hide Logout PTZ Alarm Freeze Full Screen Select and click a desired channel in Split mode to switch to the full screen of the selected channel. PTZ Control Accesses the PTZ Control menu. The PTZ menu is activated only in One-Channel Live mode. (Page 62) ZOOM Enlarges the selected image. (Page 32) English _ 00769B_SHR-8162_ENG-NEW.indb 27 2008-12-04 오전 10:14:44 live view the Launcher menu You can use the Launcher menu appearing on the bottom of the live screen to access it. 1. In Live mode, right-click to display the context menu and select . . Move the cursor to the bottom and click a desired item in the Launcher menu. M ` If no input is entered for 10 seconds, the menu will disappear. ` The Launcher menu can be accessed only using the mouse. PTZ Menu Alarm Freeze Description Date/Time Displays the current time and date. The indication of AM/PM is displayed if you set 12 hours for the time format in “System>Date/Time/Language>Time”. (Page 34) Screen Mode Displays in the sequence of 16-, 9-, 4-, 6-, 8-, 13-split, PIP and Auto Sequence. The current mode is highlighted in white. Menu Expansion Button Click to display the hidden menu to the right. Audio Turns ON/OFF the sound of the selected channel. Zoom Enlarges the selected area. This is available only in Single Live mode. PTZ Runs the PTZ Control launcher. This is available only in Single Live mode. Alarm Stops the alarm if it's activated. Freeze Freezes the Live screen temporarily. Play Enters Play mode if a file to play exist, and if not, enters Search mode. Record Start/End recording the Live screen. _ live 00769B_SHR-8162_ENG-NEW.indb 28 2008-12-04 오전 10:14:46 Live Mode SHR-7160/7162/8160/8162 display Live images from 16 channels in a total of 8 layout of split screens. Switching the screen mode CH1 CH2 CH3 CH4 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH1 CH13 CH2 CH14 CH3 CH15 CH4 CH16 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 M CH1 CH2 CH3 ` SHR-7080/7082/8080/8082 do not support the 16-split screen mode. CH5 CH1 16-split mode CH4 CH5 CH6 CH1 CH7 CH2 CH8 CH3 CH9 CH4 CH5 CH6 CH7 CH8 CH9 CH2 CH2 CH1 CH1 CH5 CH1 CH2 CH3 CH2 CH5 CH3 CH3 CH6 CH4 CH7 CH2 CH3 CH16 CH4 CH8 CH7 CH8 CH9 CH2 CH2 PIP CH1 CH6 CH2 CH1 CH3 13-split mode CH15 CH5 6-split mode CH7 CH2 CH6 CH2 CH3 CH3 CH2 CH3 CH4 CH4 CH5 CH6 CH5 CH6 CH7 CH8 CH1 CH2 CH3 CH1 CH9 CH1 CH8 CH4 CH9 CH10 CH11 CH12 CH2 CH3 CH4 CH4 CH5 CH6 CH5 CH6 CH7 CH8 CH1 CH1 CH2 CH2 CH3 CH2 CH3 CH4 CH5 CH2 CH9 CH13 CH10 CH14CH11 CH15 CH12 CH16 CH7 CH8 CH1CH3 CH10 CH11 CH12 CH1 CH9 CH13 CH8 CH4 CH5 CH6 CH5CH6 CH6 CH7 CH7 CH8 CH2 CH9 CH13 CH10 CH14CH11 CH15 CH12 CH16 CH3 CH7 CH8 CH9 CH4 CH6 CH5 CH6 CH7 CH3 CH9 CH13 CH10 CH14CH11 CH15 CH12 CH16 CH3 CH4 CH7 CH8 CH9 CH14 CH5 CH4 CH4 CH1 CH13 CH4 CH5 CH2 CH8 CH1 CH4 CH1 CH1 8-split mode CH1 CH6 CH3 CH1 CH4 CH1 CH3 4-split mode CH3 CH4 CH2 CH2 CH1 9-split mode ! live To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu. Press the [MODE] button on the front panel or the remote control to switch the mode in the sequence of the launcher menu items. CH3 CH9 CH4 CH2 CH1 CH1 CH2 CH3 CH4CH3 CH2 CH1 CH1CH2 CH3 CH4CH3 CH5 CH6CH2 CH7 CH8 CH1 CH2 CH4 CH6 CH4 CH1CH5 CH3 CH1 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH4 CH5 CH6 CH3 CH1 CH4 CH9 CH13 CH10 CH11 CH6 CH12 CH16 CH15 CH4 CH5 CH14 CH2 CH13 CH5CH14 CH4 CH15 CH6 CH2 Switching the split mode CH16 CH3 CH2 CH4 CH7 CH7 CH1 CH3 CH5 Auto Sequence CH5 CH4 CH3 CH4 CH3 CH4 CH1 CH2 CH3 CH1 CH10CH2CH2 CH11 CH12 CH13 CH5 CH6 CH7 CH8 3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH2 CH7 CH8CH1 CH4 CH1 CH2 CH2 CH3 CH2 CH7 CH8CH1 H4 CH1 CH2 CH2 CH3 CH2 7 CH8CH1 CH1 CH2 CH2 CH3 CH2 CH2 CH3 CH2 CH1 CH5 CH6 CH3 CH4 CH5 CH8CH1 CH2 CH2CH4 CH3 CH2 CH3 CH1 CH5 CH6 CH1CH1 CH8 CH2 CH11 CH1 CH12 CH2CH4 CH3 CH2 CH3 CH1 CH5 CH6 H8CH1 CH12 CH2CH4 CH2 CH11 CH3 CH2 CH1 CH4 CH5 CH6 CH1CH1 CH2 CH3 CH4 CH5 CH2 CH3CH3 CH2 11 CH12 CH2 CH1 CH3 CH2 CH1 CH4 CH5 CH6 CH6 CH7 CH3 CH1 CH2 CH12 CH2 CH2 CH3 CH4 CH5 CH6 CH15 CH16 CH3CH3 CH4 CH5 CH6 CH4 CH1CH1 CH7 CH8 CH1 CH9 CH2CH3 CH12 CH2 CH2 CH3 CH4 CH5 CH6 CH15 CH16 CH4 CH5 CH2CH6 CH3 CH4 CH3 CH5 CH4 CH2 CH7 CH8 CH1 CH9 CH2CH3 H12 CH2 CH2 CH3 CH4 CH5 CH6 CH16 CH3CH3 CH4 CH5 CH3CH1 CH6 CH6 CH2 CH7 CH4 CH1CH1 CH7 CH8 CH1 CH9 CH2CH3 215CH2 CH2 CH3 CH4 CH5 CH6 CH16 CH3CH7 CH5 CH6 CH1 CH4 CH1 CH9 CH8 CH1 CH9 CH8 CH1CH4 CH2CH3 CH4 H2CH16 CH2 CH3 CH4 CH5 CH6 CH4 CH5 CH6 CH4 CH2 CH3 CH4 CH5 CH7 CH8 CH1 CH9 CH2 CH2CH3 CH3 CH2 CH3 CH5 CH6 H16 CH4 CH5 CH3 CH6 CH6 CH4 CH1CH1 CH7 CH8 CH1 CH9 CH7 CH2CH3 CH1 CH3 CH5 CH6 6 CH4 CH5 CH6 CH1 CH4 CH7 CH8 CH1 CH9 CH9 CH2CH3 CH8 CH1 CH4 CH5 CH6 CH1 CH10 CH11 CH12 CH13 CH4 CH5 CH6 CH6 CH5CH3CH3 CH7 CH8 CH3 CH4 CH1CH1 CH7 CH8 CH1 CH9 CH2 CH5 CH6 CH4 CH5 CH3 CH6 CH3 CH4 CH1 CH6 CH7 CH8 CH9 CH7 CH6 CH3 CH4 CH5 H5 CH6 CH4 CH5 CH6 CH3 CH4 CH1 CH1 CH7 CH8 CH9 CH9 CH8 CH6 CH1 CH4CH1 CH5CH3 CH5 CH6 CH6CH7CH4 CH8 CH10 CH11 CH12 CH13 CH3 CH4 CH8 CH9 CH4 CH5 CH6 CH3 CH4 CH8 CH9 CH4 CH5 CH6 CH3 CH4 CH8 CH9 CH1 CH9 CH8 CH4 CH1 CH5 CH5 CH6 CH6 CH7CH4 CH8 CH1 CH10 CH11 CH12 CH13 CH3 CH4 CH8 CH9 CH4 CH5 CH6 CH3 CH4 H8 CH9 CH1 CH4 CH5 CH6 CH3 CH4 CH9 CH1 CH11 CH8 CH2 CH3CH1 CH3 CH2 CH7 CH9 CH10 CH12 CH13 CH5 CH6 CH7 CH8 CH1 CH6 CH1 CH2 CH CH1 CH2 CH3 CH9 CH8 CH CH1 CH6 CH8 CH3 CH9 CH4 CH4 CH4 CH4 CH5 CH5 CH1 SHR-7160/7162/8160/8162 display 16 Live images in the sequence of Single, 4-split and 9-split modes. Auto Sequence CH2 CH3 CH4 CH5 CH2 CH2 CH3 CH4 CH5 CH2 CH2 CH3 CH4 CH5 CH2 CH2 CH3 CH4 CH5 CH2 CH6 CH2 CH3 CH4 CH5 CH2 CH7 CH3 CH6 CH3 CH4 CH5 H2 CH7 CH3 CH2 CH6 CH3 CH4 CH5 CH7 CH3 CH2 CH6 CH3 CH4 CH5 CH7 CH3 CH2 CH3 CH4 CH5 CH1 CH7 CH3 CH2 CH4CH6 CH9 CH8 CH3 CH4 CH5 CH1 CH1 CH7 H3 CH2 CH4CH6 CH9 CH8 CH2 CH4CH6 CH3 CH4 CH5 CH1 CH7 CH9 CH8 CH2 H2 CH4CH6 CH3 CH4 CH5 CH1 CH7 CH9 CH8 CH1 CH2 CH1 CH3 CH8CH4 CH5 CH10 CH11 CH12 CH13 CH1 CH7 CH7CH6 CH9 CH8 CH4 CH1 CH1 CH3 CH8CH4 CH5 CH10 CH11 CH12 CH13 CH1 CH7 CH7CH6 CH9 CH8 H4 CH10 CH2CH2 CH11 CH1 CH12 CH1 CH6 CH5 CH10 CH11 CH12 CH13 CH1 CH7 7CH3 CH8CH4 CH9 CH8 CH1 CH2 CH1 63 CH8CH4 CH5 CH10 CH11 CH12 CH13 CH1 CH7 CH9 CH8 CH1 CH2 CH1 CH10 CH11 CH12 CH13 CH1 CH7 CH8CH8 CH9 CH1 CH2 CH1 CH10 CH11 CH12 CH13 CH1 CH7 H8CH8 CH9 CH1 CH1 CH2 CH1 CH10 CH11 CH12 CH13 CH1 CH7 CH9 CH8 CH1 CH2 CH1 CH10 CH11 CH12 CH13 CH1 CH7 CH9 8 CH2 CH1 CH10 CH11 CH12 CH13 CH1 CH9 CH13 CH1CH1CH1 CH14 CH15 CH2 CH1 CH10 CH11 CH12 CH13 CH1 CH9 CH1 CH2 CH1 CH10 CH11 CH12 CH13 CH1 CH9 CH1 CH2 CH1 10 CH11 CH12 CH13 CH1 CH9 CH1 CH1 CH2 CH1 CH11 CH12 CH13 CH1 CH2 CH1 CH11 CH12 CH13 CH1 CH2 CH1 H11 CH12 CH13 CH1 CH1 CH1 1 CH12 CH13 CH10 CH16 CH11 Single mode 1 CH10 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH10 CH1 CH13 CH2 CH14 CH1 CH2 CH3 CH1 CH2 CH1 CH2 CH3 CH1 CH2 CH1 CH2 CH3 CH13 CH4 CH5 CH6 CH10 CH11 CH2 CH1 CH2 CH3 CH4 CH5 CH6 CH1CH1 CH2 CH1 CH2 CH3 CH4 CH5 CH6 CH2 CH1 CH2 CH3 CH13 CH4 CH5 CH6 CH1CH1 CH2 CH10 CH11 CH1 CH2 CH3 CH4 CH5 CH6 CH1 CH16 CH2 CH2 CH3 CH5 CH6 CH16 CH4 CH7 CH8 CH1 CH9 CH2CH3 CH2CH4 CH3 CH14 CH5 CH6 CH4 CH13 CH7 CH8 CH1 CH9 CH2CH3 CH2CH4 CH3 CH5 CH6 CH4 CH7 CH8 CH1 CH9 CH2CH3 CH2CH4 CH3 CH5 CH6 CH16 CH6 CH4 CH7 CH8 CH1 CH9 CH2CH3 CH5 H2CH4 CH3 CH14 CH4 CH5 CH6 CH3 CH4 CH13 CH7 CH8 CH1 CH9 CH2 CH3 CH5 CH6 CH4 CH7 CH8 CH1 CH9 CH2CH3 CH5 CH6 CH16 CH4 CH7 CH8 CH1 CH9 CH2CH3 CH5 CH6 CH4 CH7 CH8 CH1 CH9 CH2CH3 CH5 CH6 CH3 CH4 CH7 CH8 CH9 H5 CH6 CH16 CH3 CH4 CH7 CH8 CH9 CH6 CH3 CH4 CH8 CH9 CH3 CH4 CH8 CH9 CH3 CH4 CH8 CH9 CH3 CH4 CH8 CH9 CH7 CH8 CH11 CH12 CH5 CH3 CH4 H8 CH9 11 CH12 CH3 CH4 CH9 CH12 CH12 CH5 CH6 CH5 CH12 CH12 CH14 CH15 2 14 CH15 CH5 CH15 CH7 CH15 CH15 CH5 CH6 CH15 CH7 5 M CH12 CH1 CH4 CH2 CH1 CH2 CH8 CH2 CH4 CH2 CH1 CH4 CH7 CH5 CH7 CH5 CH3 16 CH8 CH11 CH1 CH1 CH4 CH1 CH5 CH5 CH7CH4 CH6 CH6 CH7 CH4 CH5 CH7 CH1 CH10 CH10 CH8 CH4 CH4 CH8 CH8 CH8 CH3 CH3 CH11 CH1 CH11 CH12 CH5 CH7 CH9 CH9 CH13 CH12 CH13 CH2 CH1 CH2 CH1 CH1 CH1 CH2 CH3CH1 CH6 CH6 CH8 CH6 CH8 CH6 CH8 CH7 CH1 CH1 CH2 CH6 CH6 CH3 CH9 CH3 CH5 CH3 CH7 CH5 CH4 CH3 CH2 CH3 CH6 CH1 CH7 CH15 CH11 CH1 CH9 CH1 CH9 CH2 CH3 CH2 CH3 CH4 CH4 CH3 CH9 CH2 CH3 CH9 CH4 CH2 CH1 CH4 CH1 13-16 CH4 9-12 5-8 CH1 CH1 1-4 CH1 CH4 CH4 CH7 CH3 CH1 CH3 CH5 CH5 CH7 4-split mode CH12 CH2 CH2 CH6 CH6 CH8 CH8 CH9 CH9 CH1 CH2 CH2 CH3 10-16 CH3 CH4 1-9 CH4 9-split mode CH12 CH14 CH12 CH14 CH12 CH5 CH1 CH2 CH1 CH4 CH2 CH2 CH2 CH2 CH2 CH15 CH10 CH15 CH11 CH12 ` In Single mode, If you have set in “Setting theCH13Device>Camera”, Auto Sequence will be CH14 CH15 CH15 CH10 conductedCH15 at the set interval. CH9(Page 41) CH10 CH13CH13 CH11 CH12 CH14 CH14 CH15 ` In a split mode, If you have set in “Setting the Device>Monitor”, Auto Sequence will be CH16 CH16 conducted at the set interval. (Page 46) CH7 CH7 CH8 CH3 CH7 CH2 CH7 CH5 CH6 CH6 CH7 CH7 CH1 CH2 CH11 CH2 CH8 CH3 CH12 CH11 CH3 CH4 CH4 CH12 CH12 CH14 CH15 CH14 CH13 CH12 CH11 CH11 CH13 CH13 CH11 CH10 CH8 CH13 CH10 CH9 CH4 CH15 CH13 CH10 CH10 CH9 CH8 CH8 CH12CH10 CH9 CH9 CH9 CH8 00769B_SHR-8162_ENG-NEW.indb 29 CH11 CH6 CH6 CH5 CH15 CH12 CH15 CH15 CH14 CH14 CH5 CH16 CH16 CH14 CH6 CH6 CH9 CH9 English _29CH13 CH10 CH13 CH10 CH14 CH14 CH16 CH15 CH16 CH16 CH7 CH7 CH16 CH8 CH8 CH11 CH11 CH12 CH15 CH12 CH1 CH15 CH2 CH16 CH16 2008-12-04 오전 10:14:50 CH CH1 CH1 CH5 CH6 CH7 CH8 CH5 CH2 CH3 CH4 CH3 CH6 CH4 CH7 CH8 CH1 CH8 CH2 CH5 CH6 CH10 CH11 CH7 CH1 CH9 CH1 CH12 CH4 CH13 CH8 CH9 CH10 CH14 CH11 CH15 CH12 CH16 CH13 CH3 CH3 CH3CH6 CH6 CH6 CH13 live CH15 CH16 CH1 CH5 CH6 CH2 CH1 CH3 CH9 CH3 CH4 CH4 CH3 CH9 CH1 CH2 CH3 CH4 CH2 CH2 CH2 CH5 CH6 CH7 CH8 CH1 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 CH4 CH5 CH1 CH2 CH7 CH8 CH4 CH5 CH3 CH5 CH2 CH2 CH2 CH9 CH3 CH3 CH1 CH3 CH2 CH6 CH3 CH3 CH4 CH4 CH1 CH3 CH6 CH6 CH6 CH8 CH7 CH9 CH8 CH1 ~ If pressing the right [+] button in 9-split mode: CH4 CH4 CH4 CH5 CH5 CH5 CH6 CH6 CH6 9-split (CH 1~9) mode 9-split (CH 10~16) mode Auto Sequence CH1 CH1 CH1 CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH1 CH2 CH3 CH5 CH5 CH4 CH2 CH4 CH7 CH5 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 CH4 CH5 ; CH7 CH6 CH8 CH3 CH9 CH10 CH1 CH2CH1 CH2 CH5 CH10 CH3 CH11 CH12 CH7 CH7 CH7 CH8 CH8 CH8 CH9 CH9 CH9CH3 CH3 CH3 CH4 CH4 CH4 CH2 CH2 CH11 CH3 CH4 CH2 CH1 CH2 CH1 CH5 CH1 CH3 ; CH3 CH6 CH4 CH1 CH13 CH2 CH2 CH2 CH2 CH3 CH12CH4 CH6 CH7 CH1 CH1 CH1 CH1 CH2 CH6 CH3 CH4 CH7 CH8 CH1 CH2 CH3 CH1 CH2 CH3 CH4 CH3CH5 CH4 CH13 CH15CH1 CH5 CH6CH14 CH7CH1 CH8 CH2 CH3 CH9 CH10 CH11 CH8 CH1 CH4 CH12 CH2 CH11 CH3CH11 CH10 CH1 CH10 CH10 CH11 CH12CH4 CH12 CH12 CH4 CH5 CH6 CH5 CH6 CH7 CH8 CH1 CH1 CH2 CH3 CH9 CH13 CH10 CH14CH11 CH15 CH12 CH16 CH7 CH8 CH4 CH5 CH6 CH11 CH5CH5 CH6 CH6CH7 CH8 CH4 CH8CH1 CH5 CH10 CH7 CH1 CH6 CH4 CH16 CH9 CH13 CH10 CH14CH11 CH15 CH12 CH16 CH7 CH8 CH9 CH13 CH13 CH13 CH14 CH14 CH14 CH15 CH15 CH15 CH4 CH5 CH6 CH9 CH13 CH10 CH14CH11 CH15 CH12 CH16 CH7 CH8 CH9 CH1 CH6 CH6 CH1 CH1 CH1 CH6 CH2 CH2 CH7 CH5 CH5 CH4 CH4 CH9 key to move to CH4 Press the left/right button on the front panel or the remoteCH1control, or click theCH8arrow <_/+> CH2 CH1 CH9 CH13 CH1 CH5 CH1 CH11 CH12 the next split mode. CH6 CH7CH4 CH8 CH8 CH10 CH1 CH1 CH1 CH2 CH2 CH2 CH3 CH3 CH3 CH1 CH3 CH1 CH1 CH8 CH8 CH2 CH1 CH2 CH6 CH7 CH7 CH2 CH1CH2 CH5 CH1 CH2 CH3 CH1 CH1CH13 CH1 CH10 CH11 CH12 CH11 CH12 CH13 CH12CH13 CH5 CH5 CH6 CH5 CH6 CH7 CH6 CH7 CH8 CH7 CH8 CH8CH10 CH10CH11 Manual Switching CH3 CH3 CH1 CH1 CH9 CH1 CH9 CH9 CH4 CH4 CH4CH8 CH8 CH8 CH1 CH1 CH1 CH4 CH7 CH7 CH7 CH14 CH2 CH2 CH11 CH12 CH5 CH3 CH2 CH3CH10 CH4 CH3 CH4 CH5 CH4 CH5 CH2 CH2 CH2 CH2 CH2 CH9 CH1 CH4 CH1 CH2 CH7 CH2 CH1 CH3 CH3 CH2 CH1 CH2 CH6 CH5 CH2 CH2 CH1 CH1 CH2 CH2 CH2 CH1 CH9 CH4 CH5 CH6 CH1 CH1 CH7 CH2 CH2 CH4 CH3 CH8 CH9 CH2 CH4 CH5 CH3 CH4 CH9 CH3 CH1 CH1 CH12 CH13 CH2 CH3 CH4 CH7 CH8 CH9 CH4 CH5 CH3 CH4 CH3 CH1 CH6 10-16 1-9 CH3 CH4 CH4 CH5 CH3 CH3 CH1 CH6 CH6 CH6 CH14 CH15 CH16 CH4 CH5 CH6 CH3 CH4 CH7 CH8 CH9 ~ If pressing the right [+] buttonCH16inCH13 4-split mode: CH16 CH16 CH10 CH11 CH12 Channel (CH 1~4) Channel (CH 5~8) Channel (CH 9~12) Channel (CH 13~16) Auto Sequence CH10 CH11 CH12 CH13 CH5 CH4 CH1 CH2 CH3 CH4 CH5 CH6 CH8 CH12 CH1 CH2 CH16 CH7 CH8 CH7 CH5 CH1 CH7 CH4 CH4 CH1 CH10 CH8 CH11 CH2 CH3 CH2 CH1 CH5 CH1 CH5 CH4 CH7 CH6 CH6CH2 CH7 CH8 CH1 CH2 CH1 CH10 CH5CH11 CH8 CH8 CH7 CH10 CH5 CH11 CH3 CH4 CH5 CH6 CH1 CH4 CH7 CH1 CH1 CH10 CH8 CH11 CH9 CH12 CH13 CH13 CH1 CH2 CH1 CH2 CH1 CH5 CH6 CH2 CH7 CH8 CH9 CH15 CH4 CH1 CH1 CH7 CH2 CH16 CH10 CH10 CH3 CH11 CH2 CH15 CH1 CH1CH16 CH16 CH16 CH15 CH15 CH15 CH3 CH16 CH1 CH10 CH4 CH10CH1 CH13 CH12 CH11 CH12 CH1 CH2 CH14 CH13 CH14 CH15 CH16 CH15 CH16 CH1 CH3 CH6 CH4 CH1 CH8CH1 CH9 CH1 CH1 CH1 CH2 CH2 CH2 CH2 CH2 CH1 13-16 9-12 5-8 CH1 1-4 CH1 CH1 CH1 CH3 CH2 CH1 CH4 CH3 CH4 CH4 CH3 CH3 CH16 CH9 CH15 CH14 CH14 CH14 CH2 CH2 CH2 CH9 CH3 CH10 CH11 CH9 CH12 CH16 CH8 CH14 CH13 CH15 CH13CH8 CH14 CH11 CH13 CH13 CH13 CH1 CH14 CH3 CH2 CH5 CH6 CH6 CH1 CH8CH1 CH10 CH11CH9 CH12 CH7CH9 CH8 CH5 CH6 CH9 CH7 Channel Setting CH1 CH14 CH1 CH3 CH4 CH4 CH5 ; CH11 CH10 CH11 CH12 CH7CH4 CH2 CH5CH3 CH2 CH3 CH11 CH12 CH5 CH6 CH7 CH4 CH3 CH3CH4 CH14 CH15 CH1 CH16 CH2CH5CH2 CH3 CH6 CH1 CH3 CH3 CH3 CH13 CH13CH14 CH13CH14CH15 CH14 CH15CH16 CH16 CH1 CH15CH16 CH7 CH8 CH1 CH9 CH8 CH1 CH13 CH2 CH9 CH1 CH1 CH9 CH9 CH10 CH9 CH10CH11 CH10CH11CH12 CH11CH12 CH12 CH1 CH7 CH8 CH4 CH10 CH7 CH8 CH8 CH9 CH10 CH13 CH5 CH6 CH3 CH9 CH12 CH6 CH13 CH8 CH12CH6 CH13 CH7 CH5 CH5 CH6 CH5 CH6 CH1 CH6 CH1 CH8 CH1 CH8 CH8 CH3 CH5 CH5 CH3 CH3 CH8 CH7 CH7 CH2 CH7 CH2 CH3 CH2 CH3 CH4 CH3 CH4 CH4 CH2 CH15 CH4 CH2 CH3 CH9 CH4CH10 CH5 CH9 CH9 CH10 CH10 CH16 CH6 CH7CH3 CH1 CH2 CH1 CH9 CH8 CH4 CH2 CH3 CH4 CH5 CH6 CH7 CH11 CH12 CH1 CH9 CH8 CH4 CH1 CH10 CH11 CH12 CH13 CH5 CH6 CH7 CH8 CH6 CH7 CH3 CH1CH5 CH9 CH6 CH8 CH4 CH1 CH4 CH10 CH11 CH12 CH12CH12CH13 CH5CH7 CH7 CH6 CH8 CH7 CH5 CH8 CH6 CH8 CH8CH7 CH11 CH11 CH11 CH12 CH1 CH1 CH7CH1 CH7 CH2 CH3 CH9 CH15 CH4 CH2 CH3 CH16 CH6 ; CH6 CH6 CH6 CH2 CH3 CH1 CH13 CH2 CH5 CH5 CH5 CH9 CH12 CH2 CH13 CH6 CH14 CH2 CH14 ; CH6 ; CH4 CH8 CH4 CH5 CH3 CH3 CH9 CH1 CH2 CH2 CH6 CH3 CH4 CH3 CH1 CH1 CH12 CH12 CH10 CH4 CH13 CH11 CH14 CH12 CH13 CH16 CH14 CH15 CH15 CH13 CH15screen. You can display the channel in a desired area ofCH14 a split CH10 CH11 CH12 1. Place the cursor over the camera name CH16 of each channel to display the <%> key to the right on the screen. CH13 CH5 CH14 CH15CH6 CH9 CH10 CH13 CH14 CH1 CH2 . Click a camera name to display a channel list where you can select a different channel. CH16 CH3 CH1 CH4 CH10 CH7 CH13 CH5 CH11 CH6CH12 CH8 CH9 CH14 CH15 CH16 CH2 . Select a desired channel and click it. CH5 CH7 CH8 CH6 The current channel will be switched to the selected one. CH5 CH6 CH4 `CH3 Ex : if switching CH 1 to CH 7 CH5 CH6 CH9 CH7 CH6 CH5 CH8 CH7 CH16 CH1 CH5 CH12 CH9 CH15 CH5 CH13 CH6 CH2 CH3 CH6 CH7 CH10 CH11 CH14 CH15 CH9 CH4 CH1 CH8 CH4 CH12 CH16 CH10 ; CH2CH7 CH5 CH7 CH7 CH7 CH8 CH11 CH8 CH5 CH13 CH12 CH7 CH7 CH7 CH6 CH7 CH9 CH7 CH8 CH2 CH5 CH6 CH10 CH2 CH3 CH3 CH3 CH6 CH4 CH1 CH1 CH1 CH8 CH4 CH13 CH15 CH15 CH16 CH16 CH16 CH16 CH2 CH16 CH15 CH1 CH3 CH1 CH1 CH2 CH1 CH3 CH4 CH3 CH4 CH5 CH6 CH1 CH3 CH1 CH3 CH3 CH16 CH15 CH2 CH6 CH1 CH8 CH9 CH13 CH10 CH14CH11 CH15 CH12 CH16 CH10 CH14CH11 CH15 CH12 CH16 CH13 CH14 CH15 CH14 CH13 CH15 CH12 CH16 CH14 CH13 CH12 CH12 CH8 CH14 CH14 CH15 CH13 CH13 CH12 CH11 CH2 CH12 CH10 CH11 CH10 CH11 CH4 CH10 CH10 CH11 CH3 CH11CH4 CH12 CH5 CH6 CH1 CH8 CH9 CH10 CH11 CH12 CH2 CH3 CH4 CH5 CH6 CH1 CH15CH8 CH16 CH13 CH3 CH9CH14 CH9 CH10 CH11 CH12 CH16 CH13 CH14 CH15 CH14 CH9 CH11 CH9 CH9 CH8 CH2 CH3 CH8 CH5 CH9 CH1 CH2 CH1 CH1 CH2 CH2 CH1 CH1 30_ live 6 8 CH1 CH4 CH9 CH7 CH2 CH10 CH3 CH4 CH13 CH11 CH12 CH15 00769B_SHR-8162_ENG-NEW.indb 30 CH14 CH2 CH2 CH16 CH3 CH4 CH5 2008-12-04 오전 10:14:53 C CH13 CH14 CH15 CH16 switching to single mode CH6 CH9 CH10 CH13 CH14 In a splitCH5mode, select and double-click a desired channel to switch to its Single mode. Press the number corresponding to a desired channel on the front panel or the remote control to switch to its Single mode. CH11numericCH12 CH15 CH16 Refer toCH7“remote CH8 control>using the buttons”. (Page 12) ` Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel. CH2 CH7 CH3 CH2 CH4 CH3 CH4 CH1 CH5 CH6 CH5 CH7 CH6 CH8 CH1 CH8 CH9 CH10 CH9 CH11 CH10 CH12 CH11 CH4 CH12 CH13 CH14 CH13 CH15 CH14 CH16 CH15 CH16 CH7 CH2 ; CH3 CH2 CH1 CH5 CH6 CH8 CH3 CH9 CH2 CH1 CH3 CH1 CH4 CH2 CH3 CH1 CH4 CH5 ! Live CH1 CH6 spot out The SPOT OUT monitoring is independent of the Live mode, which monitors a specific channel through the SPOT OUT port. CH2 CH3 CH4 CH5 CH2 CH6 CH7 selecting a CH3 spot out mode CH1 CH1 CH8 CH4 CH9 If an event occurs such as sensor, motion or alarm from the SPOT OUT port in connection with a monitor, you CH2 CH1 CH1 CH10 CH11 CH12 CH13 CH5 CH6 CH7 CH8 can select a output screen mode. 1. In Live mode, right-click any area on the screen. The Live menu appears. Scene Mode SPOT OUT . Click SPOT OUT. The split screen appears according to the SPOT OUT source. (Page 47) ` SPOT OUT 1 : Supports Auto Sequence and CH1 16-, 9-, CH2 4-split, CH3 Single modes. CH1 CH2 ` SPOT OUT 2, 3, 4 : Supports 4-split, Auto CH4 CH5 CH6 Sequence and Single modes. of a model, referCH9to “PartCH3 Names andCH4 CH1 ` For the SPOT OUT port CH7 CH8 Functions (Rear)”. (Page 10) CH10 CH11 CH12 CH13 CH14 CH15 SPOT OUT 1 16-split Audio Off SPOT OUT 2 9-split Freeze SPOT OUT 3 4-split Stop Alarm SPOT OUT 4 Auto Sequence Record Single Play Search Backup Main Menu Shutdown Launcher hide Logout CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 < Multichannel Live Menu > CH16 CH5 CH6 CH9 CH10 CH13 CH14 CH7 CH8 CH11 CH12 CH15 CH16 CH7 CH2 CH3 CH4 CH5 CH6 CH1 CH8 CH9 CH10 CH11 CH12 00769B_SHR-8162_ENG-NEW.indb 31 English _1 CH1 CH2 2008-12-04 오전 10:14:55 live Zoom This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. 1. Select in the right-click menu. Press the [Zoom] button on the front panel or the remote control, or simply click < menu. The zoom box appears. > in the launcher . Use the direction keys, or drag and drop to specify an area to enlarge. . Press the [enter] button, or double-click the selected area to enlarge it twice. ` In the enlarged image, use the direction buttons (▲▼_ +) on the remote control or the front panel to move the enlarged area. . Press the [Zoom] button on the front panel or the remote control, or simply click < menu to release the zoom. > in the launcher ; audio on/oFF You can turn the sound on/off corresponding to the channel in Live mode. audio on/oFF in single mode Click the audio icon ( to turn it on/off. M ) on the screen, or press the [audio] button on the front panel or the remote control ` Only the channel where