Sanyo Electric Co C401SA Single-Mode Cellular Phone (CDMA) User Manual F P382 414

Sanyo Electric Co Ltd Single-Mode Cellular Phone (CDMA) F P382 414

Users Manual

389389その他その他■Operating InstructionsOperating Instructions Name & function of partsq11 Antennaw Incoming call light   blinks green when the phone rings, and lights red during batterycharging.e Sub-display   shows wait time, receive time, etc, while the set is closed.r Speaker   used to incoming calls.t Strap holey Ear-microphone jack   used to connect an optional switchable ear microphone.u  key   used to set a message or to enter a selected item (similar func-tions as the key on top of the set).i  , Up/Down keys   used to adjust the volume, scroll through the Memory Dial con-tents, convert characters, and to make function settings (similarfunctions as the key on top of the set).o Earpiece   used to hear, other party's voice, various messages, etc.!0 Display   shows various settings, phone numbers, etc.!1 Flexible keys used to select items shown at the bottom of the display (refer to"Using the flexible keys" on page 391.)!2  key   used for the EZweb service.!3 Volume/Retrieve/Convert/Phonebook( )/   Redial( )/Cursor key   used to set the volume, call a memory dial, redial, convert Kanjicharacters, and select functions.!4  (Start) key   used to make or receive a call.!5 Dial keys   used to enter phone numbers and characters.!6 Microphone   used to convey your voice during a call.!7 External connection terminal   used to connect an optional device such as a quick-rechargeablecigarette lighter adapter.!8  (End) key   used to turn on and off the power, to end a call, or to hold a re-sponse.!9  key   used to call the menu or to enter selected items.@0  key   used to send and receive E-mail and C-mail service, to delete char-acters, or to return to the previous display.MULTI DISPLAY１２３４６７８５１１９１０１２１３１４１５１６２０１９１８1７
390390その他■Operating Instructions Display indications●The following illustration is for explanation purpose only. Not all indications will actuallybe displayed at the same time.●When any key is pressed, illumination will turn on for about 10 seconds.shows up when you set thevibration function.shows up when you set the se-cret mode.shows up during call.indicates the battery packpower in 3 levels. "充電" isdisplayed during batterycharge.shows up when you turn off theringer.shows up when there is an un-opened mail.shows up when the phone isconnected the EZ-web server.Security displayThis shows up when the en-crypted information is displayed.shows up when the front/backlight is set.shows up when the schedulefunction alarm is set.shows up when you set theeasy timer.shows signal strength. The more seg-ments, the stronger the signal. "圏外" isdisplayed while you are out of the ser-vice area or in a weak signal field.shows up when you set thealarm clock.あいうえおかき１２／２４（日） １０：３０メモ文字／マナーFappears when the contentoverflows the display.is displayed during "Kanji/Hiragana" entry mode.is displayed during "Katakana"entry mode.is displayed during alphanu-meric entry mode.is displayed during pager styleentry mode (in em fonts).is displayed during pager styleentry mode (in en fonts).is displayed during numericentry mode.shows up when the mannermode is set.shows up when the timermode is set for the mannermode.shows up when a messagememo is set.shows up during batterycharge after setting the homemode.In order to minimize the power consumption, the cdmaOne C401SA dis-play turns automatically to power saving mode when key operation isstopped for a while.Indication " " turns to " " in power saving mode.The indication restores with key operation.Power saving during standby for next information    １７：０１Silent vibrator modePochette modeOriginal manner mode
391391その他■Operating InstructionsIn this instruction manual, the indications for theflexible keys are expressed as shown below.The flexible keys correspond to the items shown at the bottom of the display.Press the key below each indication to select it.There are several different patterns of indicationsshown on the display, and the functions of the flex-ible keys vary accodingly.■ Using the flexible keys※The illustrations in this manual differs slightly from the actual displays.メモ文字／マナーFIndications on the displayFunctions of the flexible keys Fメモ文字／マナー〈Example〉メモ文字／マナーFFメモ文字／マナー■ keyIn this instruction manual, the point at which to press the key is indicated as shown below.Example) Press top or bottom → ● Continuous scrolling can be made by holding down.●The following illustration is for explanation purpose only. Some indications will not bedisplayed depending on circumstances.●When , , is pressed, illumination will turn on for about 10 seconds.●The sub-display does not work while the cover is opened.6:38indicates the battery packpower in 3 levels. "充" is dis-played during batterycharge.shows up when you set thevibration function.shows up when you turn offthe ringer.Manner mode, ringer and vi-brator settings are displayed.Silent vibrator modePochette modeOriginal manner modeshows up when there is anunopened mail.shows up when a messagememo is set.shows up when the side keyguard is set.shows signal strength. Themore segments, the strongerthe signal. "圏外" is displayedwhile you are out of the ser-vice area or in a weak signalfield.shows up when the mailbox is full. Sub-display indicationsHome mode shows up when you set thesecret mode.shows up when you set thesecret mode and the side keyguard at the same time.
392392その他■Operating Instructions Charging with the AC Adapter● You can charge the battery with turning the power ON, but it will take longer.●If the battery has not been used for a long period or not charged for some time after sounding thealert tone,it may not start charging.Other than the cases that the battery is broken or its life is over,it starts charging in the normalway some minutes later.●When you charge the battery in weak signal areas, it might take time for the light (of incoming/charging) to light up after you set the phone unit into the desktop charger.●After charging,pull out the connector with pushinng both side release buttons.4. When fully charged, remove the phone from the desktop charger,and thendisconnect the plug from the AC wall outlet .1. Insert the connector of the AC adapter firmly into the desktop charger(see figure 1).2. Connect the plug of the AC adapter to an AC 100V wall outlet (see figure2).3. Place the au telephone unit (with battery pack attached) into the desktopcharger with care of the direction. (see figure 3, 4)The light (of incoming call / charging) lights up in red,"充電" appears on thedisplay and then begins to charge the battery.LightDisplayWhile charginglights up in red「充電」appearsFully chargedlights up in greenPhone unit's power is ON→The「 」 appearsPhone unit's power is OFF→ disappears3142AC Wall Outlet(100V)AC Adapterau telephoneunit(with battery pack attached)Light（lights up in red）Desktop chargerCharging time:approximately 115minutes.
393393その他■Operating Instructions● Extending the antenna.Extend the antenna until itstops with a click.● Retracting the antenna.Move it straight down by pulling on a lower partof the antenna.To avoid damaging the antenna, never applydirect pressure to the top part of the antenna.2The radio waves cannot be transmitted or received well if the antenna isnot extended. To facilitate transmission and reception of radio waves, usethe phone by positioning the antenna vertically with respect to the ground.Extending the antenna
394394その他■Operating Instructions3Turning the power on.Press and hold or more than one second.When you turn the power on, you'll hear the wake-up tone.After a few seconds, the sign will change to standby.(The display remains lit for about 10 seconds.)"Charamigo" data is not registered at the time of purchase. Themessage "キャラミーゴ用データ未登録です 登録しますか" appearswhen you turn the power on. When you press (YES) andregister "Charamigo" data, the character is displayed thereafter.(see Charamigo Function Guidebook.) If you press (NO),standby indication will be displayed.◆Turning the power offPress and hold for more than one second.Power is turned off.In this manual, the display shows the indications for the case when the characterdisplay function is off.Until you register the user data or cancel the character displayfunction (see Charamigo Function Guidebook.), the message"キャラミーゴ用データ未登録です 登録しますか" is displayed when-ever you turn the power on.
395395その他■Operating Instructions Displaying your own phone number.1.While in standby mode or while making a call, press .2.Pressing displays your au telephone number.1.Enter the phone number you want to call. Area code - local code - subscriber's number. example: 03-0001-XXXX Always include the area code, even when calling to a number in the same area you are in.2.Press to place a call.If you enter a wrong number:●Press briefly - the last dialed digit will be deleted.●Press and hold the entire phone number will be deleted.4 Checking the display screenCheck the display screen and make sure it is shown in the figure below after youturn the power on. This will indicates if the phone is in good working order.The above battery level figures show remaining battery strength.Certain charges in conditions may cause the battery level figuresto fluctuate.(See example of figure right.)あいうえおかき＿＿／＿＿（＿）＿＿：＿＿The availability of power is indicated in three levels.This display shows telephone signal strength.   A display of 3 bars shows the most ideal condition for telephoning.Level 3    Level 2    Level 1      full     medium     low●   when no power is left 「充電(電池交換)してください」  appears on the display。● Even in main service areas there are places that only receive weak signals.  In this case, you might not hear well or your call may be cut off. ﾒﾓ文字／マナーFCalling a landline, a mobile, PHS phone.
396396その他■Operating InstructionsMaking an International Call1. Enter the phone number you want to call using the following pattern.International dial code - Country code - Area code - subscriber's number2. Press to place the call.To make international calls, you need to fill out an application from KDDI interna-tional call services. Call numbers are given below for your reference:From landline phone or au phone: 0120-786-001 (toll free)(9:00 to 21:00)operation explanation1 Pressing "001" KDDI access code： 0012 Pressing "1" country code of United States： 13 Pressing "212" area code of New York City： 2124 Pressing "123-XXXX" subscriber's number： 123-XXXX5 Press example: to call New York City, number 123-XXXX,
397397その他■Operating InstructionsAnswering a call1. The ring tone sounds/vibrator buzzes, and the incoming call lampflashes.2. Press to answer the call.An incoming call can also be answered by pressing any of the 、 ∼, , , , or keys.If you do not answer the call or the caller disconnects before the call is answered,"着信あり " will be displayed.Entering characters:This is the method of entering names for registering memory dials andwriting mail for "C mail" and "E mail."Each time you press 文字,the entry mode will change:Press 文字 and find the entry mode you want."Kanji", "Hiragana" entry mode.    ↓"Katakana" entry mode.    ↓"Alphabetic" entry mode.    ↓"Phone number" entry mode.
398398その他■Operating InstructionsLetters are assigned to each key as shown below. Press a key repeatedlyto cycle through letters assigned to that key. "Kanji","Hiragana"entry modekey "Katakana" "Alphanumeric""Phonenumber"かきくけこ カキクケコさしすせそ サシスセソなにぬねの ナニヌネノはひふへほ ハヒフヘホまみむめも マミムメモらりるれろワヲンーラリルレロ12345678900＃Move the cursor ( ) to the left and to the right.Symbols (full size), pictographsSymbols (half size)Line changeP／ー゛×（Impossible）×（Impossible）×（Impossible）Converts to Kanji characters.Switches between full-size and half-size characters. Switches between full-size and half-size characters.Switches lowercase. Note 1 Note 1Symbols (half size)Note 1Note 2P／−゛゜小文字゜゛゜たちつてとっやゆよゃゅょわをんわーあいうえおぉぇぅぃぁタチツテトッヤユヨャュョアイウエオォェゥィァABCabc2DEFdef3GHIghi4JKLjkl5MNOmno6PQRSpqrs7TUVtuv8WXYZwxyz9. @ - _ / : ~1Note 1: It is possible enter symbols (full size), pictographs and symbols (half size).Note 2: It is possible to put in the line change mark * in entering characters in the EZweb service.
399399その他■Operating InstructionsRegistering Memory Dials.You can register frequently used phone numbers and E-mail addresses.You can store up to 500 phone numbers and E-mail addresses in the memory dials.■Registering memory dials (Start with the menu.)To register memory dials, carry out the following basic operation.1. Press .The main menu is displayed.2. Select "電話帳" by and press .The list of phone directory functions is displayed.3. Press .The registration selection of extension item is displayed.: Extension item is registered.: Extension item is not registered.4. Press or .When is pressed, the smallest vacant number of the memory numbers No.000- No.099 is indicated.When is pressed, the smallest vacant number of the memory numbers No.100- No.499 is indicated.5. Enter the item you want.Select the icon of the item you want by and press to enter it.As for the items you can enter, see "Registration Items of Memory Dials".6. Press 保存 .This completes registration.
400400その他■Operating Instructions■Registration Items of Memory DialsYou can register the following items in the memory dials, in addition to thephone numbers.000 - 499―Names entered in Kanji/Hiragana are regis-tered automatically.―Phone numbers can be classified and con-trolled in 6 classes.You can register phone number only when "Phone No.1" is entered.You can register phone number only when "Phone No.1" is entered.―You can register E-mail address only when "E-mail address" is entered.You can classify and control names into 11 groups.Message memo can be changed according to the name you preset.Melody & Animation can be changed accord-ing to the name you preset.Ringer can be changed according to the name you preset.Image/color can be changed according to the name you preset.You can prevent disclosing the content of reg-istration to other persons.―――Content of registration cannot be changed.―Up to 12 em-size charac-ters (24 en-size characters)Up to 24 en-size charac-tersUp to 36 digits―Up to 36 digits―Up to 64 en-size alphanu-meric charactersUp to 64 en-size alphanu-meric characters――――――Up to 40 em-size char-actersUp to 128 en-size char-actersUp to 40 em-size char-acters―Memory No.NamePronunciationPhone No.1Class of No.1Phone No.2Class of No.2E-mail address 1E-mail address 2Group No. (Group name) Special message memo Special melody & animation Special ringer Special image/ color Secret Address URL Memo Location  information――Special receptions Extension items（※1）(※1) These items can be registered in the memory dials of memory No. 000 - 099 only.ItemMaximum entry charactersRemarksIcon
401401その他■Operating InstructionsMaking a call with Memory Dial.You can call by using phone numbers saved in Memory Dial.There are 8 ways to recall numbers saved in Memory Dial.① Dial Memory Dial numbers by using the number pad.② Dial by Japanese phonetic symbols, i.e. hiragana or katakana.③ Dial by telephone book order.④ Dial by letters.⑤ Dial by phone number fragment.⑥ Dial by memory number order.⑦ Dial by group number.⑧ Dial by type of phone.
402402その他■Operating Instructions■ Finding a name in the stored telephone book:1. Press .2. Press .3. Press or to access the telephone book.4. Use to scroll through and display the name you want.5. Press メニュー.6. Press or access the telephone number.■ Finding a name using the dial keys:■ Finding a name in the Japanese alphabetical order:You can dial from a list of the names whose first letters are entered using a samedial key.1. Press a desired dial key from - , and hold it for more than one second. example: to find a name that begins with カ , キ, ク ,ケ ,コ , A, B, C, a, b, c, 2, press 2. Press and hold or press several times to scroll through and display the name you want.3. Press メニュー.4. Press or access the telephone number.1. Press 文字.2. Use to scroll through and display the name you want.3. Press メニュー.4. Press or access the telephone number.
403403その他■Operating Instructions■ Finding a name by the phone number:1. Press .2. Press .3. Enter the first several digits of the desired phone number.4. Press 検索 or .5. Use to scroll through and display the name you want.6. Press メニュー.7. Press or access the telephone number.■ Finding a name in the order of the Memory Dial number:1. Press .2. Press .3. Use to scroll through and display the name you want.4. Press メニュー.5. Press or access the telephone number.1. Press .2. Press .3. Enter the first letter(s) of the desired name.4. Press 検索 or .5. Use to scroll through and display the name you want.6. Press メニュー.7. Press or access the telephone number.■ Finding a name using its first letter(s):
404404その他■Operating InstructionsSpeed Dial:<EX.> To dial the phone number stored at number 005.1. Press .2. Press .■ Calling Memory Dial numbers 000-009■ Calling Memory Dial numbers 010-099<EX.> To dial the phone number stored at number 015.1. Press , .2. Press .■ Finding a name by the phone type:1. Press .2. Press .3. Press to select the desired phone type.4. Use to scroll through and display the name you want.5. Press メニュー.6. Press or access the telephone number.■ Finding a name by the Group number:1. Press .2. Press .3. Press - , to select the desired Group number.4. Use to scroll through and display the name you want to call.5. Press メニュー.6. Press or access the telephone number.
405405その他■Operating InstructionsList of functionsMode No. F11F12F13F14F15F16F17F18Auto-lock ON/OFFChecking the estimated time and charge for the previous callChecking the estimated total time and charge for callsDisplaying the duration for the current callDisplaying the charge for the current call after ringing offSetting the remote talk function using an ear microphoneSetting the auto answering function using an ear microphoneSetting the quick callGroup F10Function DescriptionFunction DescriptionFunction DescriptionFunction DescriptionFunction DescriptionMode No. F0Instructions of functions besides F functionsGroup F0Mode No. F21※F22※F23F24F25※F26F27※F28F29※Ringer volumeSelecting ringer patternSetting the vibrator with the ringer turned offAdjusting key response tone volumeTurning off sound effectsSetting the disconnection alertComposing a melodyAdjusting speaker toneSetting an original mannerGroup F20Mode No. F31F32F33F34F35F36※F37F38※F39Turning on the display illumination while a car cigarette lighter adapter is usedTurning off the key illuminationsChanging display colorAdjusting contrast of displaySetting display animationSelecting the waiting mode displaySetting display image effectsDisplaying the charactersPower save modeGroup F30Mode No. F40F41F42F43F44※F45※F46F47F48F49※Displaying the Memory Dial number registration statusResetting the estimated time for callsResetting the estimated charge for callsResetting the contents of memoryResetting the function settingsResetting the entire memory Changing the passwordRegistering the area codeSetting the rate for callsRegistering group namesGroup F40
406406その他■Operating InstructionsFunction DescriptionFunction DescriptionFunction DescriptionFunction DescriptionFunction DescriptionMode No.F51F52F53F54F55F56Setting limits for transmissionLocking Memory Dial functionSetting limits for EZweb serviceRejecting non-shared incoming calls and unwanted callsProhibiting E-mail and C-mail serviceSetting secret modeGroup F50Mode No.F60F61※F62F63F64F65F66F67F68F69※Registering profileySetting melody & animationSetting pager style entry mode & registering user dictionarySetting the message memo, recording/playing/erasing the "absent" messageSetting the answering time for the message memoSetting the ringer and the vibration CalculatorSetting "home" modeRanking the phone numbers by frequently of reception and transmissionPlaying gamesGroup F60Mode No.F71F72※F73※F74F75F76※F77Entering the date, time or birthdaysAlarmRegistering scheduleAuto Power ONAuto Power OFFSetting easy timerRegistering task listGroup F70Mode No.F80F81F82F83F84F85F86F87F88F89Playing message(s) from the answering serviceEnabling answering serviceCanceling the answering serviceChanging the message(s) from the answering serviceForwarding incoming calls without the answering messageForwarding incoming calls while the phone is usedForwarding incoming calls unconditionallyForwarding incoming calls selectively.Resetting call forwarding serviceRegistering the destination for forwardingMode No.F91F92※F93※Notifying receiving parties of your phone numberSetting the rates for communicationSetting data communications modeGroup F90Group F80※：Unable to operate during the call.
407407その他■Operating InstructionsSpecifications●The continuous talk time and continuous standby time are the average values ofwhen the signals can be received normally while the telephone is in the standstillstatus. The operation time may be reduced to almost half due to charging conditions,temperature, and other operation environment conditions, signal condition at thelocation of use, function setting, etc.Weight: approximately 100 g (including battery pack)Continuous talk time: approximately 150 minutesContinuous standby time: approximately 200 hoursDimensions (H/W/D): approximately 94mm x 49mm x 24mm(not including the antenna and protuberances)

Navigation menu