Sanyo Electric Co NVM-4070 PND (Personal Navigation Device) User Manual NVM 4070 Manual EN

Sanyo Electric Co Ltd PND (Personal Navigation Device) NVM 4070 Manual EN

UserManual.wiki >

Sanyo Electric Co >

NVM-4070 User Manual >

User Manual 1 HTML Version

User Manual 1

FOR SERVICE ASSISTANCE, CALL

Customer Information 1-800-421-5013

Weekdays 7:30 AM – 5:00 PM Pacific Time

NVM-4070

Instruction Manual

NVM-4070 Portable Navigation System

NVM-4070 Portable Navigation System 2 Introduction

Contents Index

FCC COMPLIANCE

* This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference received, including interference

that may cause undesired operation.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

CANADIAN ICES-003 COMPLIANCE

• This Class B digital apparatus complies with Canadian ICES-003.

NOTICE

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a res-

idential installation.

This equipment generates uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any

other antenna or transmitter.

NVM-4070 Portable Navigation System 3 Introduction

Contents Index

Precautions

SANYO NVM-4070 Portable Navigation System Instruction Manual

Original issue: Jun 2007

SANYO and the SANYO logo are registered trademarks of SANYO. Other

products or system names appearing in this document are trademarks or regis-

tered trademarks of their respective owners. Further, the © or TM symbols are

not used in the text.

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopy,

recording, or otherwise, without the prior written permission of SANYO.

You have acquired a device (“DEVICE”) that includes software licensed by

SANYO from an affiliate of Microsoft Corporation (“MS”). Those installed

software products of MS origin, as well as associated media, printed materials,

and “online” or electronic documentation (“SOFTWARE”) are protected by

international intellectual property laws and treaties. Manufacturer, MS and its

suppliers (including Microsoft Corporation) own the title, copyright, and other

intellectual property rights in the SOFTWARE. The SOFTWARE is licensed,

Microsoft, Windows is registered trademarks or trademarks of the Microsoft

Corporation in the United States and/or other countries.

Adobe and Reader are registered trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and

any use of such marks by Sanyo is under license.

All other brand or product names mentioned in this manual are trademarks or

registered trademarks of their respective companies.

Maintenance

• Keep your device away from excessive moisture and extreme tempera-

tures.

• Avoid exposing your device to direct sunlight or strong ultraviolet light for

extended periods of time.

• Do not drop your device or subject it to severe shock.

• Do not subject your device to sudden and severe temperature changes.

This could cause moisture condensation inside the unit, which could dam-

age your device. In the event of moisture condensation, allow the device to

dry out completely before use.

• Do not leave your device in plain sight when you leave your vehicle. Take

your device with you or remove it from view to avoid theft.

• The screen surface can be easily scratched. Sharp objects may scratch the

screen. You may use non-adhesive generic screen protectors designed spe-

cifically for use on portable devices with LCD panels to help protect the

screen from minor scratches.

• Never clean your device with it powered on.

• Never use organic solvents such as benzene or paint thinner to clean your

device. Use of these solvents can cause deformation or discoloration.

• Use a soft, clean, lint-free cloth to clean the display screen. Moistened

LCD screen wipes could also be used as required.

• Never attempt to disassemble, repair or make any modifications to your

device. Disassembly, modification or any attempt at repair could cause

damage to your device and even bodily injury or property damage and will

void any warranty.

NVM-4070 Portable Navigation System 4 Introduction

Contents Index

Storage precautions

• Do not store your device anywhere it may be exposed to water or in condi-

tions of high humidity.

• When the device is not in use for an extended period of time, bring it

indoors and store it in cool dry area.

Accessories and repair precautions

• Only authorized accessories should be use with the device. The use of

incompatible accessories could result in bodily injury and/or damage to

the device.

• The use of unauthorized accessories will also void your warranty.

• Never attempt to disassemble, repair or make any modification to your

device.

DISCLAIMER AND LIMITATION OF LIABILITY

SANYO and its subsidiaries makes no representations or warranties, either

expressed or implied, with respect to the contents hereof and specifically dis-

claims the implied warranties of merchantability or fitness for a particular pur-

pose. SANYO and its subsidiaries assume no responsibility for any damage or

loss resulting from the use of this SANYO NVM-4070 Portable Navigation

System.

Revision: 1.00

Jun 2007

NOTE: Record the device ID, serial number, purchase date, and place of pur-

chase information in the space provided below. The serial number is indicated

on the label affixed to your NVM-4070. All correspondence concerning your

unit should include the serial number, device ID, and purchase information.

NOTE: Information in this manual is subject to change without notice.

NVM-4070 Portable Navigation System 5 Introduction

Contents Index

WARNINGS AND NOTICES

For your safety, do not operate the controls of the product while driving.

GPS satellite signals cannot typically pass through solid materials (except

glass). GPS location information is not typically available inside buildings, tun-

nels, or underground parking lots.

A minimum of 4 GPS satellite signals is needed to calculate your GPS position.

Signal reception can be affected by weather events or overhead obstacles (e.g.

dense foliage and tall buildings).

Other wireless devices in the vehicle may interfere with the reception of satel-

lite signals and cause the reception to be unstable.

Adaptor

Do not attempt to service the unit. There are no serviceable

parts inside. Replace the unit if it is damaged or exposed to

excess moisture.

Do not use the adaptor if the cord becomes damaged.

Connect the adaptor to the proper power source. The voltage

requirements are found on the product case and/or packaging.

Battery

This unit contains a non-replaceable internal Lithium Ion

battery. The battery can burst or explode, releasing haz-

ardous chemicals. To reduce the risk of fire or burns, do

not disassemble, crush, puncture, or dispose of in fire or

water.

To charge the battery, connect the AC adaptor or Car Adaptor to the main unit.

Under high temperatures, however, the protection circuit may be activated and

charging may not be possible.

Do not connect any accessory (car battery adaptor, AC power adaptor, etc.)

other than those supplied or optional.

FOR AMERICAN USERS

The following advisory is included in accordance with the laws of the State of

California (USA):

WARNING: This product contains chemicals, including lead, known to the

State of California to cause cancer, and birth defects or other reproductive

harm. Wash hands after handling.

NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law pro-

hibits drives in California and Minnesota from using suction mounts on their

windshields while operating motor vehicles. SANYO does not take any

responsibility for any fines, penalties, or damages that may be incurred as a

result of disregarding this notice.

NOTICE TO DRIVERS IN CALIFORNIA: Signs, stickers, or other materials

which are displayed in a 7-inch square in the lower corner of the windshield

farthest removed from the driver, signs, stickers, or other materials which are

displayed in a 7-inch square in the lower corner of the rear window fartherst

removed from the driver, or signs, stickers, or other materials which are dis-

played in a 5-inch square in the lower corner of the windshield nearest the

driver.

NVM-4070 Portable Navigation System 6 Introduction

Contents Index

READ CAREFULLY BEFORE USE!!!

User license agreement

IMPORTANT! — BY INSTALLING, COPYING, ACCESSING, DOWN-

LOADING, AND/OR USING THIS THE SOFTWARE, YOU ARE CON-

SENTING TO BE BOUND BY AND ARE BECOMING A PARTY TO THIS

AGREEMENT AS A LICENSEE. IF YOU DO NOT AGREE TO ALL OF

THE TERMS OF THIS AGREEMENT, TERMINATE THIS INSTALLATION

PROCESS OR, IF THE SOFTWARE IS ALREADY INSTALLED, IMMEDI-

ATELY UNINSTALL IT.

THIS USER LICENSE AGREEMENT (“this Agreement”) shall serve as a

legally binding instrument between you (as “Licensee”, whether an individual

or a corporation, regardless) and SANYO Electric Co., Ltd. (“Licensor”) con-

cerning the Licensee's use of a single SANYO SOFTWARE PRODUCT (“the

Software”) under the terms and conditions set forth herein. The Software shall

include, but without limitation, computer software and related media materials,

printed materials (documents such as user manuals), and electronic documents

whether or not retrieved by licensee “on-line”, and shall include any updates

and upgrades thereof supplied by Licensor having additional features and func-

tions.

Where a separate User License Agreement is attached to any the Software sup-

plied by Licensor, the terms and conditions of that User License Agreement

shall also apply in addition to the terms and conditions set forth in this Agree-

ment.

If you are unable to agree to any of the terms and conditions set forth herein,

Licensor is unable to grant you the license to install, use or copy the Software.

The Software covered under this Agreement is protected under the international

conventions and treaties on copyright and the related laws and regulations. This

license shall constitute a grant of a license to Licensee for a single use of the

Software and may not be deemed under any circumstances to constitute a sale

of the Software itself.

1. Grant of License

Licensor shall grant Licensee a non-exclusive, non-sublicensable, non-trans-

ferable license for the use of the Software under the terms and conditions set

forth herein:

• System Software

Licensee may use the Software only in a single computer or on a computer

network (“the Computer”, including without limitation, workstation, ter-

minal, and/or other digital or electronic device) in binary executable form.

2. Other rights and limitations

• Reverse engineering, etc.

Except as expressly provided herein, Licensee shall not copy, modify

reproduce, display, decompile, reverse engineer, reverse assemble, store,

translate, sell, lease or otherwise transfer, distribute the Software, in whole

or in part, nor may Licensee use the Software with the intent to clone any

proprietary product to Licensor.

• Separation or division of the Software prohibited

This license hereby is granted for a single use only. In no circumstances

shall Licensee separate, divide or compartmentalize any constituent por-

tion(s) of the Software into multiple parts, sections, or compartments for

use in multiple computers.

• Rental, lease or loan prohibited

Licensee shall not lend, lease or loan the Software to any party(ies).

• User support service by Licensor

Licensor may choose to provide user support service in accordance with

the Licensor's policy set out in User Manual, On-line documents, or other

printed matters made available by Licensor from time to time (the “Sup-

port Service”). All additional software code made available to Licensee as

a part of the Support Service shall be deemed to constitute a part of the

Software hereof to which all the terms and conditions of this Agreement

shall apply. Licensor shall be entitled to use for commercial purposes or

otherwise any and all technical information (the “Technical Information”)

provided by Licensee to Licensor, provided, however, that Licensor shall

ensure that the identity of the Licensee shall remain undisclosed in the

Licensor's use of all such Technical Information.

NVM-4070 Portable Navigation System 7 Introduction

Contents Index

3. Other Intellectual Proprietary Rights

Licensor or its supplier is the owner of all right, title and interest in and to

the Software and its documents such as user manual and any and all copies

thereof. The proprietary ownership of all data operated using this Software

shall remain with the respective owner(s) and shall be protected by the inter-

national conventions and treaties and other intellectual proprietary rights.

Licensee shall not be deemed, by anything contained in or done pursuant to

this Agreement to acquire any right, title, or interest in any trademark, copy-

right, patent or other intellectual property of Licensor, and shall do nothing

to prejudice the value or validity of the respective owner's rights therein or

ownership thereof. Licensor shall preserve the proprietary ownership of any

and all rights and titles in the Software not specifically provided herein.

4. Backup copy

After having installed a copy of the Software pursuant to this Agreement,

Licensee may make a single copy of the Software for backup and archival

purposes only, provided that any copy must contain all proprietary notices

included in the original. If another original medium becomes necessary to

use the Software on a computer under this Agreement, Licensee may make a

single copy of the Software. Except as specifically provided herein, Licensee

shall refrain from making copy of the Software or its incidental documents

such as user manual in any manner whatsoever.

5. DISCLAIMER OF WARRANTY:

THE SOFTWARE IS DEEMED ACCEPTED BY LICENSEE UPON IT'S

USE BY LICENSEE. THE SOFTWARE IS PROVIDED TO LICENSEE

AS IS, WITHOUT WARRANTY OF ANY KIND. TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW. LICENSOR FURTHER

DISCLAIMS ALL WARRANTIES, INCLUDING WITHOUT LIMITA-

TION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FIT-

NESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT.

THE ENTIRE RISK ARISING OUT OF THE USE OR PERFORMANCE

OF THE PRODUCT AND DOCUMENTATION REMAINS WITH LIC-

ENSEE. IN NO EVENT SHALL LICENSOR OR ITS SUPPLIERS BE

LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, DIRECT, INDI-

RECT, SPECIAL, PUNITIVE OR OTHER DAMAGES WHATSOEVER

(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSI-

NESS INFORMATION, OR OTHER PECUNIARYLOSS) ARISING OUT

OF THIS AGREEMENT OR THE USE OF OR INABILITY TO USE THE

PRODUCT, EVEN IF LICENSOR HAS BEEN ADVISED OF THE POS-

SIBILITY OF SUCH DAMAGES. LICENSOR DOES NOT WARRANT

THAT THE SOFTWARE DOES NOT INCLUDE ANY VIRUS OR

DEFECTS, THE SOFTWARE ROUTINE OR OTHER SOFTWARE

DESIGNED TO RESTRICT UNAUTHORIZED ACCESS; OR TO DIS-

ABLE, ERASE OR OTHERWISE HARM THE SOFTWARE, HARD-

WARE, OR DATA; OR TO PERFORM ANY OTHER SUCH ACTIONS

AND LICENSOR HEREBY EXPRESSLY DISCLAIMS ANY AND ALL

LIABILITIES TO RESTORE ANY SUCH DEFECTS.

6. Indemnification:

Licensor will not have any liability to Licensee for, and Licensee will defend

and hold Licensor harmless against, any claim, expense, judgment, liability,

or loss (including attorneys' fees and expert witnesses' expenses) based on

Licensee's use of any content of the Software, arising from any intellectual

property claim (including patent, trademark, copyright, or trade secret

infringement), any right of publicity or privacy claim, or any defamation or

unfair competition claim.

7. Termination.

Without prejudice to any other rights, Licensor may terminate this Agree-

ment if Licensee fails to comply with the terms and conditions herein. Lic-

ensee may also terminate this Agreement at any time by destroying the

Software and Documentation and all copies thereof. The provisions of sec-

tions 2, 3, 4, 5, 6 and 7 shall survive any termination of this Agreement.

NVM-4070 Portable Navigation System 8 Contents

Contents Index

Contents

Chapter 1 NVM-4070 Features and Specifications ...................... 10

1.1 SANYO NVM-4070 Feature ................................................. 10

1.2 NVM-4070 Specifications ..................................................... 10

Chapter 2 Getting Started .............................................................. 12

2.1 Hardware Overview .............................................................. 12

2.1.1 Packing List .............................................................................12

2.1.2 External Features .....................................................................12

2.2 Mounting the NVM-4070 in your vehicle .............................. 14

2.3 Set up TMC antenna unit in your vehicle ............................. 17

Chapter 3 System ........................................................................... 19

3.1 NVM-4070 Operating Basics ................................................ 19

3.2 To turn on and calibrate the device: ..................................... 19

3.3 System Settings ................................................................... 21

3.3.1 Language .................................................................................21

3.3.2 Date & Time ............................................................................21

3.3.3 Brightness ................................................................................22

3.3.4 Volume ....................................................................................22

3.3.5 FM Transmitter .......................................................................22

3.3.6 Power ......................................................................................23

3.3.7 System Information .................................................................23

Chapter 4 Communications ........................................................... 25

4.1 Connection ........................................................................... 25

4.1.1 Mobile Phone Connection (New) ...........................................25

4.1.2 Mobile Phone Connection (Reconnect) ..................................26

4.2 Hands-free Calling ............................................................... 27

4.2.1 Making a Call ..........................................................................27

4.2.2 Receiving a Call ......................................................................28

4.3 Contacts ...............................................................................28

4.3.1 Create new entry .....................................................................28

4.3.2 Call-out ...................................................................................29

4.3.3 View ........................................................................................29

4.3.4 Delete ......................................................................................30

4.4 Data Transfer ........................................................................30

4.4.1 File Transfer ............................................................................30

4.4.2 Import Phonebook ...................................................................31

4.4.3 Export Contacts to SD ............................................................31

4.4.4 Import Contacts from SD ........................................................31

4.5 SMS (Short Message Service) .............................................32

4.5.1 Inbox .......................................................................................32

4.5.2 Outbox .....................................................................................33

4.5.3 Write SMS ..............................................................................33

4.5.4 Draft ........................................................................................34

Chapter 5 Multimedia Players ........................................................35

5.1 Music Player .........................................................................35

5.1.1 Features ...................................................................................35

5.1.2 Using the Music Player ...........................................................35

5.1.3 Background Music Mode ........................................................36

5.2 Photo Viewer ........................................................................36

5.2.1 Features ...................................................................................36

5.2.2 Using the Photo Viewer ..........................................................36

5.2.3 Full-screen Display / Slide-show ............................................37

5.3 Video Player .........................................................................37

5.3.1 Features ...................................................................................37

5.3.2 Using the Video Player ...........................................................37

5.3.3 Full Screen Display .................................................................38

5.3.4 Fast Forward / Backward Play Mode ......................................39

5.4 USB Mass Storage ...............................................................39

NVM-4070 Portable Navigation System 9 Contents

Contents Index

Chapter 6 Accessary Disc ............................................................. 40

6.1 Companion CD ..................................................................... 40

6.2 DVD Map Software (update DVD) ....................................... 41

Chapter 7 Troubleshooting ........................................................... 43

7.1 Your device does not turn on. .............................................. 43

7.2 The internal battery cannot be charged. .............................. 43

7.3 System stops responding; is “frozen” or “locked up.” ........... 43

7.4 If your device still does not respond after performing

“soft reset”, try a “hard reset.” .............................................. 43

7.5 Users can also perform a “system reset.” ............................ 43

7.6 Screen is not displayed normally. ........................................ 43

7.7 The touch screen does not respond well. ............................ 43

7.8 Connection Problems with PC. ............................................ 43

7.9 No GPS connection .............................................................. 43

7.10 No sound coming from the device. ..................................... 43

7.11 Getting a GPS fix takes longer time than normal. .............. 44

7.12 Factory reset does not mean a GPS reset. ........................ 44

7.13 Bluetooth functions do not work. ........................................ 44

7.14 Unavailable functions ......................................................... 44

Index ............................................................................................... 45

NVM-4070 Portable Navigation System 10 Chapter 1 Features and Specifications

Contents Index

Chapter 1 NVM-4070 Features and Specifications

1.1 SANYO NVM-4070 Feature

The SANYO NVM-4070 Portable Navigation System is a powerful multifunc-

tion GPS navigation and entertainment device.

• Compact size and lightweight

• Integrated GPS receiver for GPS navigation

• USA/Canada/Alaska/Hawaii/Puerto Rico map preloaded into Internal

2GB Flash

• Embedded SD/MMC card slot ensuring ample data storage

• Incorporates high-performance GPS antenna

• High-resolution color LCD

• 4" wide touch screen with 16:9 scale

• Bluetooth v1.2 supported with hands-free, profile

• Multimedia functionality with high performance processor

1.2 NVM-4070 Specifications

General Specification

Overall dimension (w/o

antenna) 5.1" x 3.1" x 1.1" (130 mm x 79 mm x 28 mm)

Weight (incl. battery) 9.2 oz (260 g)

Certificates FCC

Operating Temperature 32 ºF to 122 ºF ( 0 ºC to 50 ºC)

Storage Temperature short period: -4 ºF to 140 ºF (-20 ºC to 60 ºC)

long period: -4 ºF to 95 ºF (-20 ºC to 35 ºC)

Charging battery

Temperature 32 ºF to 104 ºF ( 0 ºC to 40 ºC)

Hardware Main unit

Display 4" Touch screen, 480 x 272 pixel, TFT, 16.7M

colors

Memory NAND Flash 2GB

Indicators Green/Red/Orange for power, Blue for Bluetooth

Speaker 1.2 W, 8 Ω

Connectors MiniUSB (B type), SD/MMC memory slot, DC

in, Headphones, TMC

(Headphones jack) 3.5mm, stereo, More than 32 Ω

(TMC antenna jack) 2.5mm

Bluetooth Bluetooth v1.2 compatible class 2

Bluetooth Profile HFP, DUN, FTP, SPP

FM transmitter ON/OFF, Frequency setting

Microphone Bluetooth Hands-free

USB Interface USB ver. 2.0

Main Battery

Type Rechargeable Li-ion

Voltage/Capacity 3.7V, 2400 mAh

Runtime (MP3 mode,

default settings) Up to 4 hours

Charge time 3.5 hours

GPS

Type internal

Chipset SiRF GSC3

NVM-4070 Portable Navigation System 11 Chapter 1 Features and Specifications

Contents Index

Car Adaptor

Input rating 12-24V

Output rating 5.0V, 2A

Certificates CE, e-mark, C-Tick

AC Adaptor

AC Input 100-240V, 50-60Hz

DC Output 5.0V, 2A

Certificates CE,UL,TUV-GS,CCC,BSMI,K mark, C-Tick,

Singapore Safety

USB Cable

Length 4' (120 cm)

SD Card

Support Capacity Maximum 4GB (SDHC Support)

MMC (Multi Media Card)

Support Capacity Maximum 2GB

NVM-4070 Portable Navigation System 12 Chapter 2 Getting Started

Contents Index

Chapter 2 Getting Started

This chapter describes the hardware interface of the SANYO NVM-4070 and

its peripherals. Instructions for setting up the device and some basic system

operations are also discussed.

2.1 Hardware Overview

This section introduces the NVM-4070 external features and hardware compo-

nents.

2.1.1 Packing List

The SANYO NVM-4070 box contains all of the items listed below:

• NVM-4070 Portable Navigation System

• Dashboard Mounting Disc

• Windshield & Dashboard Car Mounting kit

• Car Power Adaptor

• AC Power Adaptor

• USB cable

• Quick Start Guide

• CD Instruction Manual

•Warranty

• DVD Map Software

• TMC antenna unit

2.1.2 External Features

Figure 1: Front Panel View

NOTE: Although the NVM-4070 rechargeable Li-ion battery comes approxi-

mately 40-80% charged, before using, it is best to connect the AC adaptor and

plug to power socket and fully charge the battery. The ON/OFF button will

glow orange when charging.

Table 1: Front panel controls

No. Function Description

1 Power / Menu button

Normal ON/OFF power button and change menu

2 Microphone Microphone (directional Microphone)

3 LED Glows blue when Bluetooth connected

4 Speaker Speaker

NOTE: Power / Menu button : Press the button for long interval as Normal

ON/OFF power button.

Press and hold the button for 2 seconds to turn

power off.

While unit power is on, press and immediately

release the button to display Main Menu.

2 3

NVM-4070 Portable Navigation System 13 Chapter 2 Getting Started

Contents Index

Figure 2: Top and Bottom view Figure 3: Left and Right side view

Table 2: Top and Bottom controls

No. Function Description

1 Microphone (nondirectional Microphone)

2 USB input Connects to the USB cable.

3 ON/OFF The main power/battery cut off switch.

4 Reset Restarts your device with (a soft reset).

123

Table 3: Left and Right panel controls

No. Function Description

1 Headphones Standard stereo headphones jack.

2DC Power

input For AC Adaptor or Car Adaptor

3SD/MMC

slot

Accepts a SD (Secure Digital) or MMC (MultiMediaCard)

for data storage.

4TMC antenna

jack Standard TMC antenna jack.

NVM-4070 Portable Navigation System 14 Chapter 2 Getting Started

Contents Index

2.2 Mounting the NVM-4070 in your vehicle

The NVM-4070 comes with a car Mounting kit and a car adaptor to help install

your device in your vehicle. The car Mounting kit uses a suction cup on the

windshield/dashboard to offer flexible mounting options for the NVM-4070.

This section shows how to install the car mount kit in your vehicle’s wind-

shield/dashboard using the suction cup. Below is the backside view of the

NVM-4070.

Figure 4: NVM-4070 Slot for Windshield & Dashboard Car Mounting kit

WARNING: Do not use the car mount kit under low temperatures. The cradle

may come off because of insufficient suction power.

WARNING: Make sure that the car mount kit does not obstruct the driver’s

view, or interfere with the operation of vehicle airbags and safety devices.

NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State

law prohibits drives in California and Minnesota from using suction mounts

on their windshields while operating motor vehicles. SANYO does not take

any responsibility for any fines, penalties, or damages that may be incurred as

a result of disregarding this notice.

NOTE: Do attach the Car Adaptor to your device when you use it in vehicle.

Rechargeable batteries may sometimes not be chargeable in the vehicle.

Slots for Windshield & Dashboard Car Mounting kit

NVM-4070 Portable Navigation System 15 Chapter 2 Getting Started

Contents Index

Figure 5: Windshield & Dashboard Car Mounting kit

Table 4: The components of Windshield & Dashboard Car Mounting kit

No. Component Description

1Adjustable 4 prong ratch-

ing plate

Connects the device to the ratching plate

which can be adjustable horizontally and verti-

cally.

2 Tower unit Allows the device to be adjusted in 360°

3 Suction cup locking lever Secures the vacuum seal of the car mount.

4 Suction cup Fixes the car mount to the selected mounting

area.

5 Suction cup release tab Pull to release the vacuum seal of the suction

cup.

6Dashboard Mounting

Disc For Dashboard mounting usage

NVM-4070 Portable Navigation System 16 Chapter 2 Getting Started

Contents Index

Using the car Mounting kit

1. Clean and dry the mounting surface with a clean cotton cloth.

2. If the ambient temperature is below +60°F (15°C), you can warm the

mounting area and the suction cup (e.g. with a hair dryer) to ensure a

strong suction bond.

3. Install the car mount on the selected area.

On the Windshield

a. Fix the suction cup to the selected area with the locking lever facing

up for easier access.

b. Flip the locking lever away from you to create a vacuum between the

suction cup and the window surface.

On the Dashboard

Warning: The permanent mounting adhesive is extremely difficult to

remove after it is installed.

a. Remove the backing from the permanent mounting adhesive on the

bottom of the disc and place the mounting disc on the dashboard.

b. Fix the suction cup to top of the mounting disc with the locking lever

facing up for easier access.

c. Flip the locking lever away from you to create a vacuum between the

suction cup and the mounting disc.

Make sure that the suction is strong and stable before proceeding to the

next step.

4. After you are sure the mounting bracket is safe and secure, attach and slide

the NVM-4070 into its ratching plate. It snaps in easily with the quick

release connectors.

5. Adjust the car mount for the best viewing angle.

6. Connect the car adaptor into the cigarette lighter receptacle.

7. The car adaptor LED indicator will glow when powered.

8. Plug the car adaptor into the side of the NVM-4070 and position the cord

to an appropriate location.

Figure 6: Mounting on the windshield

NOTE: Your car may be required to switch the vehicle ignition into the

accessories position to power the cigarette lighter. Your NVM-4070 will not

charge with the ignition off.

New Photograph

NVM-4070 Portable Navigation System 17 Chapter 2 Getting Started

Contents Index

Figure 7: Mounting on the dashboard

9. Detach the NVM-4070 from the Car mounting kit (ratching plate)

Figure 8: Mounting on the dashboard

2.3 Set up TMC antenna unit in your vehicle

Figure 9: TMC antenna with take up reel

New Photograph

Press lock button

on ratching plate

No. Component Description

1 TMC antenna unit Main unit with take up reel

2 Take up lever Lever for taking plug and lead wire up

3 Suction cup Fix TMC antenna on Windshield

4 TMC plug and lead wire Connect with Navigation device

NOTICE TO DRIVERS IN CALIFORNIA: Signs, stickers, or other materials

which are displayed in a 7-inch square in the lower corner of the windshield

farthest removed from the driver, signs, stickers, or other materials which are

displayed in a 7-inch square in the lower corner of the rear window fartherst

removed from the driver, or signs, stickers, or other materials which are dis-

played in a 5-inch square in the lower corner of the windshield nearest the

driver.

NVM-4070 Portable Navigation System 18 Chapter 2 Getting Started

Contents Index

Figure 10: TMC antenna recommended connection method

Using the TMC antenna unit

1. Clean and dry the suction cup surface with a clean cotton cloth.

2. Fix TMC antenna unit on Windshild as recommended connection method

3. Plug into Navigation device TMC jack

WARNING: Make sure that the TMC antenna does not obstruct the driver’s

view, or interfere with the operation of vehicle airbags and safety devices.

WARNING: When you reel off the TMC antenna real, you must do it holding

the plug, because reeling speed is very fast.

NOTE: SANYO is not responsible for the availability or quality of traffic

information provided by TMC.

New Photograph

NVM-4070 Portable Navigation System 19 Chapter 3 System

Contents Index

Chapter 3 System

3.1 NVM-4070 Operating Basics

You can now turn it on to calibrate the screen. After screen calibration, proceed

to system settings configuration.

3.2 To turn on and calibrate the device:

1. Turn on the Battery ON / OFF switch.

2. Tap the center of the target as it moves around the screen.

NOTE: If you turn on/off the device by using Battery switch, the clock will be

reset. At that time, please set Date & Time again.

NOTE: When you first turn on your device, you will be asked to calibrate the

screen. This process ensures the accuracy of the touchscreen when used.

NOTE: Calibration is repeated until it succeeds.

NVM-4070 Portable Navigation System 20 Chapter 3 System

Contents Index

3. To set the system language settings, tap the forward or backward arrow

until the language you want appears.

Tap the Return button to set the language and return to the System Menu.

4. To set the system date and time, tap “Date & Time” in System Menu.

When you tap “12H”, the time format changes to “24H” format.

5. Tap the correct Year, Month and Day.

Tap the Return button to set the Date and return to the “Date & Time”

Menu.

6. Tap the “Time” in the “Date & Time” Menu.

7. Tap the Return button to set the Time and return to the “Date & Time”

Menu.

NVM-4070 Portable Navigation System 21 Chapter 3 System

Contents Index

8. Next, tap “Time Zone” in the “Date & Time” Menu.

If you check “Automatic daylight saving time”, NVM-4070 adjusts clock

for daylight saving automatically.

9. After all settings are finished, the Main Menu opens.

3.3 System Settings

System setting can be used to view and adjust your device current preferences.

Navigate from the System Menu.

3.3.1 Language

Refer to Chapter 3.2.

3.3.2 Date & Time

Refer to Chapter 3.2.

12345

No. Description

1FM Transmitter Icon (This icon is displayed when FM-Transmitter is

ON)

2 Battery Status

Bluetooth Status

: Bluetooth is “ON”.

Mobile phone is not connected.

: Mobile phone is connected.

4 The name of the connected mobile phone

5Time

NVM-4070 Portable Navigation System 22 Chapter 3 System

Contents Index

3.3.3 Brightness

1. Tap the Brightness icon in the System Menu.

2. Tap + or - to set the Backlight brightness.

3. Tap the left or right arrow to set the LCD power-save of battery and AC

power drive modes.

4. Tap the Return button to return to the System Menu.

3.3.4 Volume

1. Tap the Volume icon in the System Menu.

2. Tap + or - to set default system sound volume.

3. Tap the Return button to save and return to the System Menu.

3.3.5 FM Transmitter

1. When tapping the bottom-left button in the Volume screen, the Check mark

is added.

2. NVM-4070’s Speaker output is set to OFF. Volume is changed to the max-

imum value automatically and FM Transmitter output is turned ON.

3. Tap the Frequency (XX.X MHz) button.

4. Input frequency using “FM Transmitter Frequency” screen and then tap

“Set”.

NVM-4070 Portable Navigation System 23 Chapter 3 System

Contents Index

5. Tap the bottom-left button again. FM Transmitter output is turned OFF.

3.3.6 Power

1. Tap the Power icon in the System Menu.

2. When AC adaptor or Car adaptor is disconnected, you can view the

remaining battery power in the Battery Level bar.

3. Tap the Return button to return to the System Menu.

3.3.7 System Information

1. Tap the Sys Info. icon in the System Menu.

2. You can view the OS version, GPS firmware version and other system

information.

3. Tap “Calibration” to open the Calibration screen of the touch panel.

Tap the center of the target as it moves around the screen.

NVM-4070 Portable Navigation System 24 Chapter 3 System

Contents Index

4. Tap “Factory Reset” to open a dialog box to select whether to reset the set-

tings. Tap “YES” to reset the settings and “NO” not to reset the settings.

5. Tap “GPS Reset” to open a dialog box to select whether to reset the GPS

satellite receiver. Tap “YES” to reset the receiver and “NO” not to reset the

receiver.

6. Tap the Return button to return to the System Menu.

NVM-4070 Portable Navigation System 25 Chapter 4 Communications

Contents Index

Chapter 4 Communications

“Communications” provides the various functions with the Bluetooth mobile

phone.

“Communications” main menu is as follows:

4.1 Connection

4.1.1 Mobile Phone Connection (New)

1. Set Bluetooth to “ON” in the “Settings”, and tap the “Connection” button

of the “Communications” screen.

2. Tap the “Search” button. NVM-4070 starts to search available mobile

phones.

3. The available phones are displayed on the phone list. Select one of the

mobile phones and tap the “Connect” button.

No. Description

1 The name of the connected mobile phone

Bluetooth Status

: Bluetooth is “ON”.

Mobile phone is not connected.

: Mobile phone is connected.

NOTE: Make sure the Bluetooth settings of your mobile phone.

- The Bluetooth switch is set to “ON” or “enable”.

- The visibility is set to “Discoverable”, “Show my phone”.

(For more detailed information, see your phone’s manual.)

NVM-4070 Portable Navigation System 26 Chapter 4 Communications

Contents Index

4. The mobile phone will often require you to enter a password to connect the

device. Enter “0000” on the mobile phone in this case.

5. When the connection completes, the screen returns to the “Communica-

tions” screen. The name of the connected phone is displayed on the title

bar. And the Bluetooth icon changes to green.

4.1.2 Mobile Phone Connection (Reconnect)

1. Set Bluetooth to “ON” on the “Settings”, and tap the “Connection” button

of the “Communications” screen. The mobile phones that have connected

in the past displays on the “Paired list” .

2. Select one of the mobile phones and tap the “Connect”.

3. The mobile phone will often require you to enter a password to connect the

device. Enter “0000” on the mobile phone in this case.

4. When the connection completes, the screen returns to the “Communica-

tions” screen. The name of the connected phone is displayed on the title

bar. And the Bluetooth icon changes to green.

NOTE: If the connected mobile phone has the Bluetooth auto-accept function,

set this function to “ON”.

(For more detailed information, see your phone’s manual.)

NVM-4070 Portable Navigation System 27 Chapter 4 Communications

Contents Index

4.2 Hands-free Calling

“Call-out” screen is as follows:

Call-out

Call-out (in a phone call)

4.2.1 Making a Call

1. Tap the “Call-out” button of the “Communications”, the Call-out screen

opens.

2. Input a phone number and tap .

NVM-4070 starts to make a call.

3. Tap , the phone call quits.

No. Name Description

1 Dial-up Start to make a call.

2 History Call-out from the history of the incoming / outgoing

call

3 Contacts Call-out from the contacts. In detail, refer to 4.3.

No. Name Description

4 Hang-up Close a phone call.

5Mute

Set the microphone muting.

:Set the microphone mute to ON.

:Set the microphone mute to OFF.

NVM-4070 Portable Navigation System 28 Chapter 4 Communications

Contents Index

4.2.2 Receiving a Call

1. When the connected mobile phone receives a call, the caller's phone num-

ber and two buttons are displayed on the screen.

(If the phone number exits in the entry of Contacts, the caller's name is also

displayed.)

2. To receive a call, tap . To quit a call, tap .

3. On a phone call, the “Hang-up” button and the “Mute ON/OFF” button are

displayed at the top-right of the screen.

4. On the “Settings”, you can do the setting of the automatic answer to phone

call.

4.3 Contacts

“Contacts”screen is as follows:

4.3.1 Create new entry

1. Tap “New” button. The “Input Entry” screen opens.

No. Description

1 Save: Save the entry

2 Category Up / Down

3 Item Up / Down

4 Keyboard (Alphabet, Numbers, and Symbols)

NVM-4070 Portable Navigation System 29 Chapter 4 Communications

Contents Index

2. Input each item. All categories and items are as follows:

3. Tap the “Save” button, the entry is added to the list of Contacts.

4.3.2 Call-out

1. Select the entry and tap the “Call-out” button.

2. Select one of the enabled buttons, NVM-4070 starts to make a call to the

selected number.

4.3.3 View

1. Select one of the entries and tap the “View” button, the “View Contacts”

screen opens.

You can see the detailed information of the selected entry.

Category Record

Name First

Last

Phone

Home

Work

Mobile

Other

Home Address Street City State

Zip Country —

Work Address Street City State

Zip Country —

Others Company

E-mail

NOTE: The maximum number of the saved entry is 400.

NVM-4070 Portable Navigation System 30 Chapter 4 Communications

Contents Index

2. Tap the “Edit” button, the “Input Entry” screen opens and you can edit the

entry.

3. About the “Call-out” button, see 4.3.2.

4.3.4 Delete

1. Select the entry and tap the “Delete” button.

2. Tap “YES” to delete.

4.4 Data Transfer

Tap “Data Transfer” button in “Communications” screen.

4.4.1 File Transfer

1. Tap “File Transfer” button.

2. Files and folders on mobile phone appears.

NOTE: Not all mobile phones support “File Transfer”.

moves to upper folder.

File display

scroll

Sanyo Electric Co NVM-4070 PND (Personal Navigation Device) User Manual NVM 4070 Manual EN

Sanyo Electric Co Ltd PND (Personal Navigation Device) NVM 4070 Manual EN

Contents

User Manual 1

Navigation menu

Namespaces

Views

Navigation