Sanyo Fvm3982 Owner S Manual Folded OM 0017 39_Z6SF (E)

2014-07-06

: Sanyo Sanyo-Fvm3982-Owner-S-Manual sanyo-fvm3982-owner-s-manual sanyo pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

TRADEMARKS ________
Manufactured under license from Dolby
Laboratories. “Dolby” is a trademark of
Dolby Laboratories.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN!

CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK
OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

class

(38.5” diagonal)
Model No.:

FVM3982
Owner’s
Manual
(English)

1080p HDTV LCD
Please read before operating your HDTV!

• Do not use hard objects such as hard
cloth or paper to clean the screen.
• Do not use excessive pressure when
cleaning the screen; excessive pressure
can cause permanent discoloration or
dark spots.
• NEVER spray liquids on the screen.

HANDLING PRECAUTIONS
• Handle by the cabinet only.
• Handling by two or more people is recommended.
• Never touch the screen when handling.
• Handling damage is not covered under
warranty.
• Do not remove the protective film
covering the front cabinet while
handling the HDTV.

ENERGY STAR

Manufactured under license from Audyssey
Laboratories. U.S. and foreign patents pending.
Audyssey Dynamic Volume® is a registered
trademark of Audyssey Laboratories.

10.

Power Requirement:
Source: AC 120V, 60Hz

CAUTION: The screen can be damaged if
it is not maintained properly.

As an Energy Star ® Partner,
Sanyo Manufacturing Corporation
has determined that this product
meets the Energy Star ® guidelines for energy efficiency.

SPECIFICATIONS

Part No.: 1JC0P1P0017 - -

PROTECTING THE LCD
SCREEN

HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.

1.
2.
3.
4.
5.
6.
7.

POSITIONING THE HDTV

AC Power Consumption: 120 watts

11.

Weight: 20 lbs (w/stand)

12.

Dimensions _________________________
WIDTH

HEIGHT DEPTH

• Always use a firm and flat surface when
positioning your HDTV.

w/stand

• Do not position the unit in a confined
area.

NOTE: Dimensions are in inches

• Allow adequate space for proper ventilation.
• Do not position the HDTV where it is
easily reachable by small children and
may present risk of injury.
• Once HDTV is positioned, remove the
protective film covering front cabinet.
The American Academy of Pediatrics discourages media use by children younger
than two years. For more information,
visit www.aap.org.

36.7

w/out stand

25.1

8.8

22.8

4.3

CONTAINS MERCURY
LAMPS, DISPOSE OF
PROPERLY
SANYO television customers
should
contact
MRM
Recycling at 888-769-0149 or
visit
their
website
at
www.mrmrecycling.com
regarding SANYO’s waste
management plan.

13.
14.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than
the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit fully into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. If an outside antenna is connected to the television equipment,
be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges.
In the U.S. Selection 810-21 of the National Electrical Code provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrodes.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electrical light or power
circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING ACCORDING
TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

“Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

17. Wall or Ceiling Mounting—The product should be mounted to
a wall or ceiling only as recommended by the manufacturer.
18. Apparatus shall not be exposed to dripping or splashing, and no
objects filled with liquids, such as vases, shall be placed on it.
19. When the MAINS plug is used as the disconnect device, the
disconnect device shall remain readily operable.

FCC INFORMATION ________________________________________________
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.

ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection
Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency
and the U.S. Department of Energy helping us all save money and protect the environment
through energy efficient products and practices.
Changes to default as-shipped television configuration and settings or enabling certain optional
features and functionalities will change the energy consumption of the television, this may
increase energy consumption beyond the limits required for ENERGY STAR qualification.

– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user’s authority to
operate the unit.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require
a safety connection to electrical earth.

GETTING STARTED
STAND ASSEMBLY

______

NOTE: Skip these steps if you are wall
mounting the TV.

Place HDTV face down on a
padded or cushioned flat surface
to protect the screen and finish.

Carefully insert the stand base to
the bottom of the HDTV and secure
it by inserting four (4) screws as
indicated in the diagram below.

NOTE: Stand base screws are located
in the literature package.

BATTERY INSTALLATION
Install two (2) “AAA” batteries in the
remote control. (Not included)
PRECAUTIONS:
• Replace both batteries at the same
time. Do not use a new battery with a
used battery.
• There’s a risk of explosion if a battery
is replaced by an incorrect type.
• Keep away from moisture.
• Be sure to match the “+” and “–”
signs on the batteries with marks
inside the remote control.
• Please properly dispose of used up
batteries.
WARNING: The batteries (or battery
pack) shall not be exposed to excessive
heat such as sunshine, fire or the like.

Position the HDTV on a firm and
flat surface with adequate space
for proper ventilation.

WALL MOUNTING

(OPTIONAL)
Wall mounting of the HDTV must be
performed by a skilled person.

ANTENNA CONNECTION FOR
OFF-AIR SIGNALS OR CABLE
Hook up your antenna or your cable
service to the HDTV’s ANT terminal
with the use of a 75 OHM coaxial cable.
NOTE: Keep your indoor antenna at
least 3 ft. away from the television set and any other electronic equipment.

If stand base disassembly is required:

Place HDTV face down on a
padded or cushioned flat surface
to protect the screen and finish.

Remove the four (4) screws securing the foot stand. CAUTION: Hold
the stand firmly as you remove
the last screw.

VESA standard interface: 200 x 200
Mounting screws measurements:
M6 (6mm) Diameter, Length—12mm
(maximum)

Need help?

www.sanyoctv.com

Before proceeding, please make
sure to correctly hook up your
antenna or cable connection and
all AV equipment to your HDTV.
1. PLUG IN AC POWER CORD
120V AC, 60Hz
2. TURN ON TV
3. TV SET LOCATION SELECTION:
Select “Home Mode” to set the
HDTV’s backlight to an Energy Star
qualified level, or select “Store
Mode” to set the backlight to a retail
display level.
4. CHANNEL AND SIGNAL SEARCH:
Select “Signal Search” and press
ENTER to perform a channel search
from an Antenna or a direct Cable
connection, and a signal search
from devices hooked up to the
HDTV’s AV input jacks.
5. SIGNAL SEARCH RESULT SCREEN
The final setup screen displays analog and digital channels found, as
well as AV inputs detected.
Select Finish Setup and press
ENTER.
NOTE: If you wish to repeat the
process, select Repeat.

ANTENNA
Channel Search Result: Succesfully Completed
Analog Channels 16

Video 1

CABLE

ANALOG / DIGITAL
ANTENNA IN

Finish Setup

Video 2

Digital Channels 26

HDMI 1

HDMI 2

Repeat

HDTV INPUT/OUTPUT REFERENCE ________________________________________
1 HDMI (INPUT1 or INPUT2)
Use HDMI INPUT1 & 2 to hookup HD digital devices such as
a Blu-ray player, HD Cable Box, HD Satellite Receiver or
Video-game System.
Connect your digital device’s HDMI output to any of the two
(2) HDMI inputs on your HDTV with the use of an HDMI
cable.

HDTV SIDE PANEL
HDMI

1
HDMI

NOTE: A DVI connection is possible via the HDMI (DVI) INPUT1
using an appropriate cable or adapter and connecting the
audio to the Stereo Mini AUDIO jack.

2 USB
USB input jack is used to connect a USB mass storage
device to watch digital images stored in JPEG format.

3 AUDIO mini stereo jack (3.5mm)

For AUDIO signal from DVI device.

4 Digital Audio Output (Coaxial)

DIGITAL
AUDIO
OUTPUT

Hookup a multichannel receiver with the use of a phonotype digital audio cable.

5 Analog / Digital Antenna Input

HDTV BACK PANEL

Hook up your indoor or outdoor digital antenna, or a direct
Cable service (Analog or ClearQAM).

6 VIDEO INPUT2
Green (Y), blue (Pb), and red (Pr) Video inputs plus the
white and red Audio inputs.
COMPONENT connection will accept SDTV, EDTV and
HDTV video signals. Use it for great image quality from digital devices such as a DVD player or Video Game system.
Match your digital device’s Component output jacks to the
Component input jack set (VIDEO2) on your HDTV.

6
7

NOTE: A composite connection is possible via VIDEO INPUT2
using the Y (VIDEO) jack and the L/R audio jacks (see
Video2 Setting.)

If you are having problems, call us toll-free at 1-800-877-5032

7 VIDEO INPUT1

Use the four (4) screws included in the
literature package to secure the HDTV
to a wall mounting kit.
NOTE: Wall mounting kit is not included.

INITIAL CHANNEL SEARCH

AV INPUT SELECTION
The tuner in this HDTV can receive:

• Digital and Analog off air signals
from an antenna

• Analog or ClearQAM cable channels

Press the INPUT key to select the
correct AV input for the video source
you wish to watch.
NOTE: Unused AV inputs may be disabled with the Input Setting feature.

Composite yellow (Video), plus white and red (Audio) input
jacks.
COMPOSITE connections are used to hookup your analog
equipment such as a VCR or an older DVD player.
NOTE: Match the color of your device’s output jack, the
connector and the HDTV’s input jack.

Printed in Mexico, March 2012
US2P / 39-Z6SF / GXBM

from a direct Cable TV connection.

1-800-877-5032

Sanyo Manufacturing Corp. 3333
Sanyo Road, Forrest City, AR 72335

Need help?

www.sanyoctv.com

1-800-877-5032

REMOTE CONTROL OPERATION _______________________________
ECO

ONTIMER

SUB CH. Use for the direct selection of
digital subchannels. For example: for
channel 39.1 press the 3 and 9 keys,
followed by the dash –, and 1 keys.
MUTE. Mute or restore the sound.
INFO. Displays the Channel Information
banner.
PIX SHAPE. Cycles through the various
aspect ratios. The different settings
either stretch, zoom, or fill the image
on your screen. Bars may appear on
top and bottom of your screen (or on
left and right sides) depending on the
broadcasted signal or program.

SUB CH

INFO

DYN VOL

DYN VOL. Modifies the Dynamic
Volume feature settings
MENU. Displays or the on-screen menu.
Use as “back” key in menu navigation.
HELP. Displays the on-screen Help menu.
CURSOR . Move the on-screen
cursor in the desired direction.

INPUT. Selects the video source to
view. Holding down the key displays
the Input List.
ECO. Modifies the Energy Saver level.
AUDIO. Selects the desired Audio
mode. Stereo, Mono, or SAP (when
available.)

Use the CURSOR keys to move the
channel select bar through all enabled
and disabled channels.
NOTE: You can use the CH keys to
change page.

ON TIMER. Displays the current switch
on time (if activated.)
CAPTION. Cycles through the available
Caption modes (when available.)
RESET. Pressing it twice restores your
HDTV to its factory settings. All user
customized settings will be cleared.
SLEEP. Displays the “Off” Timer. While
Off Timer is on-screen, press the “0”
key to Set the amount of time (in 30
minute increments) at which the HDTV
will turn off.
NUMERIC KEYS. Choose a channel
directly.

Channel Search
Auto – Searches the detected mode,
Cable or Air.
Cable – Searches for analog and
unscrambled (ClearQAM) digital cable
channels.
Air (Antenna) – Searches for analog
and digital off-air channels.

Move

WREG-DT

Analog

Digital

03-1

Digital

03-2

WCVB

Analog

WEXT

Analog

NICK

Analog

NICK

Digital

06-1

VBCT

Page

ENTER Select

EXIT

Exit

NOTE: For information on local digital
channels, visit www.antennaweb.org

Input Setting feature allows the
removal of unused inputs from the AV
input loop.
Use the CURSOR keys to select an
AV input. Press ENTER to disable
(uncheck) or enable (check) the highlighted input.
TV

Channel Search

Video1

Channel Scan Memory

Video2

Input Setting

HDMI1

Video2 Setting

HDMI2

MENU Return

EXIT

RECALL. Switch between current channel and last selected channel or input.

You may choose between Vivid, Mild,
and Standard, which have predetermined fixed picture parameter
values, or choose the Manual option
for customized personal settings.

MANUAL PICTURE SETTINGS
NOTE: Some TV ratings offer more
detailed settings such as
Dialogue, Language, Sexual,
and Violence.

Manual parameters to adjust include:
• Color
• Tint
• Contrast
• Brightness

ADVANCED V-CHIP SYSTEM (RRT5)

• Sharpness

NOTE: When vertical scroll bars appear,
press CURSOR to gain
access to the additional ratings.
MORE INFORMATION
Additional information about MPAA
(Motion Picture Association of
America) and V-Chip rating can be
found at: www.mpaa.org and
www.v-chip.org, respectively.

• Color Temperature

The Detailed Setting option allows for
the adjustment of several additional
parameters such as:
• Signal Balancer • Noise Reduction
• White Balance
• H-Size / V-Size

• Edge Enhancer
• Dynamic Contrast

Vivid

Color

Mild

Tint

Standard

Contrast

Manual

Brightness

HDTV SIDE PANEL

Detailed Setting
Default

HDMI
ENTER Select

Move

MENU Return

EXIT

Exit

Use the CURSOR keys to highlight
the picture parameter you wish to
adjust. Press the ENTER key to enter the
value adjustment screen. Modify the
selected parameter’s value by pressing
the CURSOR keys.
NOTE: CURSOR keys select the
next/previous parameter without returning to the previous
menu screen.

Use the CURSOR and keys to
modify the Current Time and/or Switch
On Time.

V-Chip (parental control)
Use this feature to automatically block
programs with content you deem as
inappropriate for viewing by your
children.
NOTE: This feature is designed to comply with the United States of
America’s FCC V-Chip regulations. Therefore, it may not function with broadcasts that originate in other countries.

When Auto Shut-off feature is set to
ON, it will allow the HDTV to automatically turn off when no video and/or
audio signals are being received.

Select ON and press ENTER. Select
Adjust (Standard) and press ENTER.
TV

NOTES: By factory default, this feature is set to ON. The HDTV
will automatically turn off if
no AV signals are received in
a time span of 15 minutes.
Use the CURSOR keys to select On
or OFF and press ENTER.

Setup
Menu Language

Off

V – Chip

Digital Caption

Adjust (standard)

Energy Solution
Clock Timer
Mode (Home/Store)

Move

ENTER Select

MENU Return

EXIT

Exit

Mode (Home/Store)

NOTE: Blocking a rating will automatically block all higher ratings.
Unblocking a rating will automatically unblock all lower
ratings.

Use the Mode (Home/Store) option if
you would like to change the initial
Energy Saving Mode chosen at HDTV’s
first power on.

For V-Chip (Movie) ratings select Movie
and press ENTER, and then select the
desired MPAA rating limit. Press the
EXIT key to close the V-Chip menu.

USB FLASH
DRIVE

Insert the flash drive into the USB port,
the TV will display the Photo Viewer
screen, select Shuffle Play or Browse
Photos and press ENTER to begin.

Store Mode - High brightness and
contrast for display at retailer store.
NOTE: Only Home Mode qualifies for
Energy Star.
Press ENTER on the desired mode.

ONE-YEAR LIMITED PARTS AND LABOR
WARRANTY
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS
PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO
RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED
WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT
APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
WARRANTY APPLICATION
FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing
Corporation (SMC) warrants this TV to be free from manufacturing defects in materials and
workmanship under normal use and conditions for parts and labor.
For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing
Corporation will replace any defective TV via exchange at the retailer. To ensure proper
warranty application, keep the original-dated-sales receipt for evidence of purchase.
Return the defective TV to the retailer along with the receipt and the included
accessories, such as the remote control. The defective TV will be exchanged for the same
model, or a replacement model of equal value, if necessary. Replacement model will be
contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Once adjustments are complete, press
the EXIT key to return to normal TV
viewing.

Choose sound setting option:

Detailed Setting

Press ENTER on a thumbnail photo to
enable the Rotate, Full View and Start
Slideshow functions.

Treble
Bass Extension
Audyssey Dynamic Volume

ON
Medium

Once in Full View mode:
Use the CURSOR keys to change
picture.

Default Sound

Move

NOTE: A thumbnail hide icon will
appear if a picture cannot be decoded
or if no thumbnail data is available.

USING THE PHOTO VIEWER

Manual
Bass

The Manual option provides different
parameters that can be personally
adjusted:
• Bass & Treble
• Bass Extension
• Audyssey Dynamic Volume 1
• Detailed Setting
– Equalizer: Personalize audio highs
and lows.

ADJUSTING A PICTURE SETTING

Dynamic, Mild, Standard –
Predetermined sound parameters not
linked with any Picture option.

Use the CURSOR and keys to
modify
Font,
Background,
and
Foreground of digital caption text.

Color Temperature

Display the On Screen menu and use
the CURSOR keys to select
Sound. Press ENTER.

Auto – Sound settings are linked to
the current Picture option and parameters are adjusted accordingly.

NOTE: Local broadcasters decide
which caption signals to transmit.

View pictures on your HDTV with the
use of a USB mass storage device (not
included.)

Sharpness

When On Timer Function is set to ON,
the TV will automatically turn on at the
previously set Switch on Time.

Home Mode - For saving energy and
power consumption reduction.

PHOTO VIEWER

Picture

SOUND

MANUAL SOUND SETTINGS

1 Audyssey Dynamic Volume solves the
problem of large variations in volume level
between television programs, commercials,
and between the soft and loud passages of
movies. Audyssey Dynamic EQ is integrated
into Dynamic Volume so that as the playback
volume is adjusted automatically, the perceived bass response, tonal balance, surround
impression and dialog clarity remain the same.

Captioning is textual information transmitted along with the picture and
sound. Turning Captioning ON (by
pressing the CAPTION key during normal TV viewing) causes the HDTV to
open these captions (digital or
analog) and superimpose them on the
screen.

USB INPUT

PICTURE
Display the On Screen menu and use
the CURSOR keys to select
Picture. Press ENTER.

NOTE: Each AV input can have its
own picture mode (pre-determined or manual.) Current
input’s selected option is indicated by a blue marker.

Use the CURSOR and keys to
highlight the different options, and use
the ENTER key to block or unblock the
selected rating.

Press ENTER on the desired language.

Exit

NOTE: At least one input must and
will remain checked.
Unchecked box means the input will
be skipped

Use the CURSOR keys to select On
or OFF and press ENTER.

AUTO SHUT-OFF

Choose between English, Spanish and
French for your On Screen menu’s display language.

USB

ENTER Select

NOTE: When room lighting is dark,
the panel brightness and/or the
picture setting parameters
such as brightness and contrast are lowered. When room
lighting is bright, parameters
are affected opposite.

Clock Timer
This feature allows you to set a
Current Time for your HDTV and
enable a Switch On Time for the HDTV
to turn on at a specific time of day.

ADJUSTING THE V-CHIP RATINGS

:Skip

VOL + – . Increases or decreases the
audio level.

RRT5 (V-Chip Regional Ratings 5) is an
advanced V-Chip ratings system for over
the air digital channels. When the HDTV
detects compatible RRT5 data, it’s
downloaded & stored in memory, and
the Setup V-Chip screen is then modified to show the Adjust (Advanced)
option.

SETUP

Channel Setting

Move

V-Chip (continued)

Press ENTER, a blue mark will appear
next to the selected option indicating it
as the active option.

Digital Caption

Input Setting

Digital Add-On – Searches digital channels adding newly found digital channels to the channel database.

CH . Scan through the channels in
the memory database.

For V-Chip (TV) ratings select TV and
press ENTER. Use the CURSOR
keys to select a rating and press ENTER.
Use the CURSOR keys to set the
rating’s status as Blocked or Viewable.
Once ratings are set, press the EXIT key
to close the V-Chip menu.

This feature detects ambient room
light brightness and uses that reading
to control the panel brightness level
and picture parameters to reduce the
HDTV’s power consumption.

Menu Language

MENU Return

– Level 1: Energy Saver feature is off.
– Level 2: Low power consumption.
– Level 3: Lowest power consumption.

LIGHT SENSOR

Display the On Screen menu and use
the CURSOR keys to select Setup.
Press ENTER.

Channel Scan Memory

ECO (ENERGY SAVER)
ECO controls the LCD backlight brightness to reduce power consumption.

Press ENTER on the desired level.

Press ENTER to enable or disable the
selected channel.

ON-SCREEN MENU
OPERATION
Display the On Screen menu and use
the CURSOR keys to select
Channel Setting. Press ENTER.

Use the CURSOR keys to select the
type of connection you’ll use in VIDEO
INPUT 2.

Channel Scan Memory lists all Analog
and Digital channels found. It also lists
Analog channels that were not found,
which can be added.

EXIT. Exits the on-screen menu.

CHANNEL

Use this feature to establish either a
Component or Composite connection
to the VIDEO INPUT 2 jacks on your
HDTV.

Channel Scan Memory

ENTER. Set or confirm selected option.
POWER. Turns your HDTV On or Off.

Energy Solution

Video2 Setting
IMPORTANT FACT: This HDTV maintains only
one database of digital channels. Therefore,
when you search for cable channels, the
database of antenna digital channels will be
deleted. You will only be able to receive those
ClearQAM channels your cable company
provides.

ENTER Select

MENU Return

EXIT

Exit

ADJUSTING A SOUND SETTING

Press ENTER to show the full view
options menu.

Use the CURSOR keys to highlight
the sound parameter you wish to adjust.
Press the ENTER key to enter the value
adjustment screen. Modify the selected
parameter’s value by pressing the
CURSOR keys.

• Rotate
• Pan
• Start Slideshow

NOTE: CURSOR keys select the
next/previous parameter without returning to the previous
menu screen.

In the Slideshow Setup menu you may
turn the Shuffle and Quick Change
options ON or OFF.

Once adjustments are complete, press
the EXIT key to return to normal TV
viewing.

• Zoom In / Out
• Slideshow setup
• Browse Photo

SLIDE SHOW

Press ENTER on Start Slideshow
either from the Thumbnail View
Screen or from the full view options
menu to start the slideshow from the
current picture.

OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants
this product to be free from defects in material and workmanship under normal use and
conditions. During the first 90 days under this warranty for any manufacturing defect or
malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at
the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
Please call 1-800-877-5032. Please be prepared to give us the television’s model number
and serial number when you call. The model number and serial number are printed on a
label attached to the back of the unit.
For customer assistance, call toll free 1-800-877-5032.
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary from state to state.
(EFFECTIVE: March 1, 2007)
Your Sanyo HDTV is registered at the time of purchase,
please keep sales receipt for future reference.
For your protection in the event of theft or loss of this product, please fill in the
information requested below and KEEP IN A SAFE PLACE FOR YOUR OWN
PERSONAL RECORDS.
Model No. ______________________

Serial No. _____________________________

(Located on back of unit)

Purchase date ___________________

Purchase Price _________________________

Where Purchased _________________________

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 for Macintosh
Create Date                     : 2012:04:05 14:25:20-07:00
Modify Date                     : 2012:04:05 14:25:20-07:00
Creator Tool                    : QuarkXPress: pictwpstops filter 1.0
Format                          : application/pdf
Creator                         : Pablo Sanchez
Title                           : Folded OM-0017--39_Z6SF (E)
Document ID                     : uuid:df109d50-7f65-11e1-8f90-000a95bb4e3a
Instance ID                     : uuid:df10a25c-7f65-11e1-8f90-000a95bb4e3a
Page Count                      : 2
Author                          : Pablo Sanchez

EXIF Metadata provided by EXIF.tools

Sanyo Fvm3982 Owner S Manual Folded OM 0017 39_Z6SF (E)

Navigation menu

Versions of this User Manual:

Views

Navigation