Sanyo Fvm3982 Owner S Manual Folded OM 0017 39_Z6SF (E)

2014-07-06

: Sanyo Sanyo-Fvm3982-Owner-S-Manual sanyo-fvm3982-owner-s-manual sanyo pdf

Open the PDF directly: View PDF .
Page Count: 2

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding-type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not fit fully into your out-

let, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched par-

ticularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

15. If an outside antenna is connected to the television equipment,

be sure the antenna system is grounded so as to provide some

protection against voltage surges and built up static charges.

In the U.S. Selection 810-21 of the National Electrical Code pro-

vides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding conductors, location

of antenna discharge unit, connection to grounding electrodes,

and requirements for the grounding electrodes.

16. An outside antenna system should not be located in the vicini-

ty of overhead power lines or other electrical light or power

circuits, or where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care

should be taken to keep from touching such power lines or cir-

cuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING ACCORDING

TO NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

“Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the build-

ing, as close to the point of cable entry as practical.”

17. Wall or Ceiling Mounting—The product should be mounted to

a wall or ceiling only as recommended by the manufacturer.

18. Apparatus shall not be exposed to dripping or splashing, and no

objects filled with liquids, such as vases, shall be placed on it.

19. When the MAINS plug is used as the disconnect device, the

disconnect device shall remain readily operable.

RISK OF ELECTRIC SHOCK DO NOT OPEN!

CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK

OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTE-

NANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

FCC INFORMATION ________________________________________________

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-

erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm-

ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user’s authority to

operate the unit.

Please read before operating your HDTV!

PROTECTING THE LCD

SCREEN

CAUTION: The screen can be damaged if

it is not maintained properly.

•Do not use hard objects such as hard

cloth or paper to clean the screen.

•Do not use excessive pressure when

cleaning the screen; excessive pressure

can cause permanent discoloration or

dark spots.

•NEVER spray liquids on the screen.

HANDLING PRECAUTIONS

•Handle by the cabinet only.

•Handling by two or more people is rec-

ommended.

•Never touch the screen when handling.

•Handling damage is not covered under

warranty.

•Do not remove the protective film

covering the front cabinet while

handling the HDTV.

POSITIONING THE HDTV

•Always use a firm and flat surface when

positioning your HDTV.

•Do not position the unit in a confined

area.

•Allow adequate space for proper venti-

lation.

•Do not position the HDTV where it is

easily reachable by small children and

may present risk of injury.

•Once HDTV is positioned, remove the

protective film covering front cabinet.

Wall mounting of the HDTV must be

performed by a skilled person.

If stand base disassembly is required:

1Place HDTV face down on a

padded or cushioned flat surface

to protect the screen and finish.

2Remove the four (4) screws secur-

ing the foot stand. CAUTION: Hold

the stand firmly as you remove

the last screw.

Use the four (4) screws included in the

literature package to secure the HDTV

to a wall mounting kit.

NOTE: Wall mounting kit is not included.

VESA standard interface: 200 x 200

Mounting screws measurements:

M6 (6mm) Diameter, Length—12mm

(maximum)

WALL MOUNTING (OPTIONAL)

NOTE: Skip these steps if you are wall

mounting the TV.

1Place HDTV face down on a

padded or cushioned flat surface

to protect the screen and finish.

2Carefully insert the stand base to

the bottom of the HDTV and secure

it by inserting four (4) screws as

indicated in the diagram below.

NOTE: Stand base screws are located

in the literature package.

3Position the HDTV on a firm and

flat surface with adequate space

for proper ventilation.

STAND ASSEMBLY ______

GETTING STARTED

Install two (2) “AAA” batteries in the

remote control. (Not included)

PRECAUTIONS:

• Replace both batteries at the same

time. Do not use a new battery with a

used battery.

• There’s a risk of explosion if a battery

is replaced by an incorrect type.

• Keep away from moisture.

• Be sure to match the “+” and “–”

signs on the batteries with marks

inside the remote control.

• Please properly dispose of used up

batteries.

WARNING: The batteries (or battery

pack) shall not be exposed to excessive

heat such as sunshine, fire or the like.

BATTERY INSTALLATION

Hook up your antenna or your cable

service to the HDTV’s ANT terminal

with the use of a 75 OHM coaxial cable.

NOTE: Keep your indoor antenna at

least 3 ft. away from the televi-

sion set and any other electron-

ic equipment.

The tuner in this HDTV can receive:

• Digital and Analog off air signals

from an antenna

• Analog or ClearQAM cable channels

from a direct Cable TV connection.

ANTENNA CONNECTION FOR

OFF-AIR SIGNALS OR CABLE

ANTENNA

CABLE

ANALOG / DIGITAL

ANTENNA IN

AV INPUT SELECTION

Press the INPUT key to select the

correct AV input for the video source

you wish to watch.

NOTE: Unused AV inputs may be dis-

abled with the Input Setting feature.

Finish Setup Repeat

Channel Search Result: Succesfully Completed

If you are having problems, call us toll-free at 1-800-877-5032

Analog Channels

Video 1 Video 2 HDMI 1 HDMI 2

Digital Channels16 26

Before proceeding, please make

sure to correctly hook up your

antenna or cable connection and

all AV equipment to your HDTV.

1. PLUG IN AC POWER CORD

120V AC, 60Hz

2. TURN ON TV

3. TV SET LOCATION SELECTION:

Select “Home Mode” to set the

HDTV’s backlight to an Energy Star

qualified level, or select “Store

Mode” to set the backlight to a retail

display level.

4. CHANNEL AND SIGNAL SEARCH:

Select “Signal Search” and press

ENTER to perform a channel search

from an Antenna or a direct Cable

connection, and a signal search

from devices hooked up to the

HDTV’s AV input jacks.

5. SIGNAL SEARCH RESULT SCREEN

The final setup screen displays ana-

log and digital channels found, as

well as AV inputs detected.

Select Finish Setup and press

ENTER.

NOTE: If you wish to repeat the

process, select Repeat.

INITIAL CHANNEL SEARCH

Need help? www.sanyoctv.com 1-800-877-5032 Need help? www.sanyoctv.com 1-800-877-5032

1JC0P1P0017 - -

Part No.:

Owner’s

Manual

(English)

1080p HDTV LCD

class

(38.5” diagonal)

080p HDTV L

Model No.:

FVM3982

Printed in Mexico, March 2012

US2P / 39-Z6SF / GXBM

Sanyo Manufacturing Corp. 3333

Sanyo Road, Forrest City, AR 72335

This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require

a safety connection to electrical earth.

The American Academy of Pediatrics dis-

courages media use by children younger

than two years. For more information,

visit www.aap.org.

SPECIFICATIONS

Power Requirement:

Source: AC 120V, 60Hz

AC Power Consumption: 120 watts

Weight: 20 lbs (w/stand)

Dimensions _________________________

WIDTH HEIGHT DEPTH

w/stand 36.7 25.1 8.8

w/out stand 22.8 4.3

NOTE: Dimensions are in inches

SANYO television customers

should contact MRM

Recycling at 888-769-0149 or

visit their website at

www.mrmrecycling.com

regarding SANYO’s waste

management plan.

CONTAINS MERCURY

LAMPS, DISPOSE OF

PROPERLY

As an Energy Star®Partner,

Sanyo Manufacturing Corporation

has determined that this product

meets the Energy Star®guide-

lines for energy efficiency.

ENERGY STAR

TRADEMARKS ________

Manufactured under license from Dolby

Laboratories. “Dolby” is a trademark of

Dolby Laboratories.

HDMI, the HDMI Logo and High-Definition

Multimedia Interface are trademarks or regis-

tered trademarks of HDMI Licensing LLC in

the United States and other countries.

Manufactured under license from Audyssey

Laboratories. U.S. and foreign patents pending.

Audyssey Dynamic Volume®is a registered

trademark of Audyssey Laboratories.

ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection

Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency

and the U.S. Department of Energy helping us all save money and protect the environment

through energy efficient products and practices.

Changes to default as-shipped television configuration and settings or enabling certain optional

features and functionalities will change the energy consumption of the television, this may

increase energy consumption beyond the limits required for ENERGY STAR qualification.

HDTV INPUT/OUTPUT REFERENCE ________________________________________

HDMI

DIGITAL

AUDIO

OUTPUT

HDTV BACK PANEL

HDTV SIDE PANEL

HDMI (INPUT1 or INPUT2)

Use HDMI INPUT1 & 2 to hookup HD digital devices such as

a Blu-ray player, HD Cable Box, HD Satellite Receiver or

Video-game System.

Connect your digital device’s HDMI output to any of the two

(2) HDMI inputs on your HDTV with the use of an HDMI

cable.

NOTE: A DVI connection is possible via the HDMI (DVI) INPUT1

using an appropriate cable or adapter and connecting the

audio to the Stereo Mini AUDIO jack.

USB

USB input jack is used to connect a USB mass storage

device to watch digital images stored in JPEG format.

AUDIO mini stereo jack (3.5mm)

For AUDIO signal from DVI device.

Digital Audio Output (Coaxial)

Hookup a multichannel receiver with the use of a phono-

type digital audio cable.

Analog / Digital Antenna Input

Hook up your indoor or outdoor digital antenna, or a direct

Cable service (Analog or ClearQAM).

VIDEO INPUT2

Green (Y), blue (Pb), and red (Pr) Video inputs plus the

white and red Audio inputs.

COMPONENT connection will accept SDTV, EDTV and

HDTV video signals. Use it for great image quality from di-

gital devices such as a DVD player or Video Game system.

Match your digital device’s Component output jacks to the

Component input jack set (VIDEO2) on your HDTV.

NOTE: A composite connection is possible via VIDEO INPUT2

using the Y (VIDEO) jack and the L/R audio jacks (see

Video2 Setting.)

VIDEO INPUT1

Composite yellow (Video), plus white and red (Audio) input

jacks.

COMPOSITE connections are used to hookup your analog

equipment such as a VCR or an older DVD player.

NOTE: Match the color of your device’s output jack, the

connector and the HDTV’s input jack.

REMOTE CONTROL OPERATION _______________________________

Channel Scan Memory lists all Analog

and Digital channels found. It also lists

Analog channels that were not found,

which can be added.

Use the CURSOR  keys to move the

channel select bar through all enabled

and disabled channels.

NOTE: You can use the

 keys to

change page.

Press ENTER to enable or disable the

selected channel.

NOTE: For information on local digital

channels, visit www.antennaweb.org

Channel Scan Memory

Move SelectENTERPageCH ExitEXITReturnMENU

Analog

Digital

Analog

Digital

03-1

03-2

06-1

WREG-DT

WCVB

WEXT

NICK

VBCT

IMPORTANT FACT: This HDTV maintains only

one database of digital channels. Therefore,

when you search for cable channels, the

database of antenna digital channels will be

deleted. You will only be able to receive those

ClearQAM channels your cable company

provides.

Input Setting feature allows the

removal of unused inputs from the AV

input loop.

Use the CURSOR  keys to select an

AV input. Press ENTER to disable

(uncheck) or enable (check) the high-

lighted input.

NOTE: At least one input must and

will remain checked.

Unchecked box means the input will

be skipped

Input Setting

Channel Setting

Move Select

ENTER ExitEXIT

ReturnMENU

Channel Search

Channel Scan Memory

Input Setting

Video2 Setting

Video1

Video2

HDMI1

HDMI2

USB

:Skip

Use this feature to establish either a

Component or Composite connection

to the VIDEO INPUT 2 jacks on your

HDTV.

Use the CURSOR  keys to select the

type of connection you’ll use in VIDEO

INPUT 2.

Press ENTER, a blue mark will appear

next to the selected option indicating it

as the active option.

Video2 Setting

SETUP

Display the On Screen menu and use

the CURSOR keys to select Setup.

Press ENTER.

Menu Language

Choose between English, Spanish and

French for your On Screen menu’s dis-

play language.

Press ENTER on the desired language.

Captioning is textual information trans-

mitted along with the picture and

sound. Turning Captioning ON (by

pressing the CAPTION key during nor-

mal TV viewing) causes the HDTV to

open these captions (digital or

analog) and superimpose them on the

screen.

NOTE: Local broadcasters decide

which caption signals to transmit.

Use the CURSOR  and keys to

modify Font, Background, and

Foreground of digital caption text.

Digital Caption

This feature allows you to set a

Current Time for your HDTV and

enable a Switch On Time for the HDTV

to turn on at a specific time of day.

When On Timer Function is set to ON,

the TV will automatically turn on at the

previously set Switch on Time.

Use the CURSOR  and keys to

modify the Current Time and/or Switch

On Time.

Clock Timer

Use this feature to automatically block

programs with content you deem as

inappropriate for viewing by your

children.

NOTE: This feature is designed to com-

ply with the United States of

America’s FCC V-Chip regula-

tions. Therefore, it may not func-

tion with broadcasts that origi-

nate in other countries.

ADJUSTING THE V-CHIP RATINGS

Select ON and press ENTER. Select

Adjust (Standard) and press ENTER.

NOTE: Blocking a rating will automati-

cally block all higher ratings.

Unblocking a rating will auto-

matically unblock all lower

ratings.

For V-Chip (Movie) ratings select Movie

and press ENTER, and then select the

desired MPAA rating limit. Press the

EXIT key to close the V-Chip menu.

V-Chip (parental control)

For V-Chip (TV) ratings select TV and

press ENTER. Use the CURSOR  

keys to select a rating and press ENTER.

Use the CURSOR   keys to set the

rating’s status as Blocked or Viewable.

Once ratings are set, press the EXIT key

to close the V-Chip menu.

NOTE: Some TV ratings offer more

detailed settings such as

Dialogue, Language, Sexual,

and Violence.

Setup

Menu Language

V – Chip

Digital Caption

Energy Solution

Clock Timer

Mode (Home/Store)

Off

Adjust (standard)

Move Select

ENTER ExitEXIT

ReturnMENU

ADVANCED V-CHIP SYSTEM (RRT5)

RRT5 (V-Chip Regional Ratings 5) is an

advanced V-Chip ratings system for over

the air digital channels. When the HDTV

detects compatible RRT5 data, it’s

downloaded & stored in memory, and

the Setup V-Chip screen is then mod-

ified to show the Adjust (Advanced)

option.

Use the CURSOR   and keys to

highlight the different options, and use

the ENTER key to block or unblock the

selected rating.

NOTE: When vertical scroll bars appear,

press

CURSOR

 to gain

access to the additional ratings.

MORE INFORMATION

Additional information about MPAA

(Motion Picture Association of

America) and V-Chip rating can be

found at: www.mpaa.org and

www.v-chip.org, respectively.

Display the On Screen menu and use

the CURSOR keys to select

Picture. Press ENTER.

You may choose between Vivid, Mild,

and Standard, which have predeter-

mined fixed picture parameter

values, or choose the Manual option

for customized personal settings.

NOTE: Each AV input can have its

own picture mode (pre-deter-

mined or manual.) Current

input’s selected option is indi-

cated by a blue marker.

MANUAL PICTURE SETTINGS

Manual parameters to adjust include:

• Color • Tint

• Contrast • Brightness

• Sharpness • Color Temperature

The Detailed Setting option allows for

the adjustment of several additional

parameters such as:

• Signal Balancer • Noise Reduction

• White Balance • Edge Enhancer

• H-Size / V-Size • Dynamic Contrast

Picture

Vivid

Mild

Standard

Manual

Color

Tint

Contrast

Brightness

Sharpness

Color Temperature

Detailed Setting

Default

Move Select

ENTER ExitEXIT

ReturnMENU

ADJUSTING A PICTURE SETTING

Use the CURSOR  keys to highlight

the picture parameter you wish to

adjust. Press the ENTER key to enter the

value adjustment screen. Modify the

selected parameter’s value by pressing

the CURSOR keys.

NOTE: CURSOR  keys select the

next/previous parameter with-

out returning to the previous

menu screen.

Once adjustments are complete, press

the EXIT key to return to normal TV

viewing.

Display the On Screen menu and use

the CURSOR keys to select

Sound. Press ENTER.

Choose sound setting option:

Auto – Sound settings are linked to

the current Picture option and param-

eters are adjusted accordingly.

Dynamic, Mild, Standard –

Predetermined sound parameters not

linked with any Picture option.

MANUAL SOUND SETTINGS

The Manual option provides different

parameters that can be personally

adjusted:

• Bass & Treble

• Bass Extension

• Audyssey Dynamic Volume 1

• Detailed Setting

– Equalizer: Personalize audio highs

and lows.

Manual

Move Select

ENTER ExitEXIT

ReturnMENU

Bass

Treble

Bass Extension

Audyssey Dynamic Volume

Detailed Setting

Default Sound

Medium

ADJUSTING A SOUND SETTING

Use the CURSOR  keys to highlight

the sound parameter you wish to adjust.

Press the ENTER key to enter the value

adjustment screen. Modify the selected

parameter’s value by pressing the

CURSOR keys.

NOTE: CURSOR  keys select the

next/previous parameter with-

out returning to the previous

menu screen.

Once adjustments are complete, press

the EXIT key to return to normal TV

viewing.

1Audyssey Dynamic Volume solves the

problem of large variations in volume level

between television programs, commercials,

and between the soft and loud passages of

movies. Audyssey Dynamic EQ is integrated

into Dynamic Volume so that as the playback

volume is adjusted automatically, the per-

ceived bass response, tonal balance, surround

impression and dialog clarity remain the same.

NOTE: A thumbnail hide icon will

appear if a picture cannot be decoded

or if no thumbnail data is available.

View pictures on your HDTV with the

use of a USB mass storage device (not

included.)

HDMI

USB FLASH

DRIVE

PHOTO VIEWER

USB INPUT

USING THE PHOTO VIEWER

Press ENTER on a thumbnail photo to

enable the Rotate, Full View and Start

Slideshow functions.

Once in Full View mode:

Use the CURSOR keys to change

picture.

Press ENTER to show the full view

options menu.

• Rotate • Zoom In / Out

• Pan • Slideshow setup

• Start Slideshow • Browse Photo

SLIDE SHOW

In the Slideshow Setup menu you may

turn the Shuffle and Quick Change

options ON or OFF.

Press ENTER on Start Slideshow

either from the Thumbnail View

Screen or from the full view options

menu to start the slideshow from the

current picture.

V-Chip (continued)

HDTV SIDE PANEL

Your Sanyo HDTV is registered at the time of purchase,

please keep sales receipt for future reference.

For your protection in the event of theft or loss of this product, please fill in the

information requested below and KEEP IN A SAFE PLACE FOR YOUR OWN

PERSONAL RECORDS.

Model No. ______________________ Serial No. _____________________________

Purchase date ___________________ Purchase Price _________________________

Where Purchased _________________________

(Located on back of unit)

ONE-YEAR LIMITED PARTS AND LABOR

WARRANTY

THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS

PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO

RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED

WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT

APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.

WARRANTY APPLICATION

FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing

Corporation (SMC) warrants this TV to be free from manufacturing defects in materials and

workmanship under normal use and conditions for parts and labor.

For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing

Corporation will replace any defective TV via exchange at the retailer. To ensure proper

warranty application, keep the original-dated-sales receipt for evidence of purchase.

Return the defective TV to the retailer along with the receipt and the included

accessories, such as the remote control. The defective TV will be exchanged for the same

model, or a replacement model of equal value, if necessary. Replacement model will be

contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OBLIGATIONS

For one year from the date of purchase, Sanyo Manufacturing Corporation warrants

this product to be free from defects in material and workmanship under normal use and

conditions. During the first 90 days under this warranty for any manufacturing defect or

malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at

the retailer.

HOW TO MAKE A CLAIM UNDER THIS WARRANTY

Please call 1-800-877-5032. Please be prepared to give us the television’s model number

and serial number when you call. The model number and serial number are printed on a

label attached to the back of the unit.

For customer assistance, call toll free 1-800-877-5032.

This warranty expresses specific contractual rights; retail purchasers may have addition-

al statutory rights which vary from state to state.

(EFFECTIVE: March 1, 2007)

(Located on back of unit)

PICTURE

SOUND

ECO ONTIMER

SUB CH

INFO DYN VOL

POWER. Turns your HDTV On or Off.

INPUT. Selects the video source to

view. Holding down the key displays

the Input List.

ECO. Modifies the Energy Saver level.

AUDIO. Selects the desired Audio

mode. Stereo, Mono, or SAP (when

available.)

ON TIMER. Displays the current switch

on time (if activated.)

CAPTION. Cycles through the available

Caption modes (when available.)

RESET. Pressing it twice restores your

HDTV to its factory settings. All user

customized settings will be cleared.

SLEEP. Displays the “Off” Timer. While

Off Timer is on-screen, press the “0”

key to Set the amount of time (in 30

minute increments) at which the HDTV

will turn off.

NUMERIC KEYS. Choose a channel

directly.

CH . Scan through the channels in

the memory database.

VOL + –– . Increases or decreases the

audio level.

RECALL.Switch between current chan-

nel and last selected channel or input.

SUB CH. Use for the direct selection of

digital subchannels. For example: for

channel 39.1 press the 3and 9 keys,

followed by the dash ––, and 1keys.

MUTE. Mute or restore the sound.

INFO. Displays the Channel Information

banner.

PIX SHAPE. Cycles through the various

aspect ratios. The different settings

either stretch, zoom, or fill the image

on your screen. Bars may appear on

top and bottom of your screen (or on

left and right sides) depending on the

broadcasted signal or program.

DYN VOL. Modifies the Dynamic

Volume feature settings

MENU. Displays or the on-screen menu.

Use as “back” key in menu navigation.

HELP. Displays the on-screen Help menu.

CURSOR. Move the on-screen

cursor in the desired direction.

ENTER. Set or confirm selected option.

EXIT. Exits the on-screen menu.

Auto – Searches the detected mode,

Cable or Air.

Cable – Searches for analog and

unscrambled (ClearQAM) digital cable

channels.

Air (Antenna) – Searches for analog

and digital off-air channels.

Digital Add-On – Searches digital chan-

nels adding newly found digital chan-

nels to the channel database.

Channel Search

Display the On Screen menu and use

the CURSOR  keys to select

Channel Setting. Press ENTER.

ON-SCREEN MENU

OPERATION

CHANNEL

Energy Solution

ECO (ENERGY SAVER)

ECO controls the LCD backlight bright-

ness to reduce power consumption.

– Level 1: Energy Saver feature is off.

– Level 2: Low power consumption.

– Level 3: Lowest power consumption.

Press ENTER on the desired level.

LIGHT SENSOR

This feature detects ambient room

light brightness and uses that reading

to control the panel brightness level

and picture parameters to reduce the

HDTV’s power consumption.

NOTE: When room lighting is dark,

the panel brightness and/or the

picture setting parameters

such as brightness and con-

trast are lowered. When room

lighting is bright, parameters

are affected opposite.

Use the CURSOR  keys to select On

or OFF and press ENTER.

AUTO SHUT-OFF

When Auto Shut-off feature is set to

ON, it will allow the HDTV to automa-

tically turn off when no video and/or

audio signals are being received.

NOTES: By factory default, this fea-

ture is set to ON. The HDTV

will automatically turn off if

no AV signals are received in

a time span of 15 minutes.

Use the CURSOR  keys to select On

or OFF and press ENTER.

Use the Mode (Home/Store) option if

you would like to change the initial

Energy Saving Mode chosen at HDTV’s

first power on.

Home Mode - For saving energy and

power consumption reduction.

Store Mode - High brightness and

contrast for display at retailer store.

NOTE: Only Home Mode qualifies for

Energy Star.

Press ENTER on the desired mode.

Mode (Home/Store)

Insert the flash drive into the USB port,

the TV will display the Photo Viewer

screen, select Shuffle Play or Browse

Photos and press ENTER to begin.

Sanyo Fvm3982 Owner S Manual Folded OM 0017 39_Z6SF (E)

Navigation menu

Versions of this User Manual:

Views

Navigation