Sanyo Vcc Zm300P Users Manual

vcc-zm300p to the manual fda8326c-5327-49cf-a29e-34d60f3d8183

2015-01-26

: Sanyo Sanyo-Vcc-Zm300P-Users-Manual-337603 sanyo-vcc-zm300p-users-manual-337603 sanyo pdf

Open the PDF directly: View PDF .
Page Count: 55

Download
Open PDF In Browser	View PDF

L5AA2/XE GB 2002, 4, 25

VCC-ZM300P

INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS

COLOUR CCD ZOOM camera
CCD-Farb-Zoomkamera
Caméra CCD COULEURS avec ZOOM
CCD

About this manual

A propos de ce manuel

Before installing and using the camera, please read this manual
carefully. Be sure to keep it handy for later reference.

Avant d’installer et d’utiliser la caméra, veuillez lire ce
manuel attentivement. Gardez-le à portée de main pour
toute référence ultérieure.

Über diese Bedienungsanleitung
Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der
Kamera zuerst diese Bedienungsanleitung sorgfältig durch und
bewahren Sie sie zum späteren Nachschlagen auf.

L5AA2/XE GB 2002, 4, 25

CONTENTS

English

MAIN FEATURES ......................................................................
ACCESSORIES ...........................................................................
PRECAUTIONS ..........................................................................
PARTS NAMES AND FUNCTIONS ...........................................
CONNECTIONS .........................................................................

2
2
3
4
6

Basic connection for monitoring or recording.........................
Connection of peripheral equipment and controller
terminal ......................................................................................

DISPLAYING/CLOSING THE MENU SCREEN .......................... 8
MENU ITEM FLOW AND MENU OPERATION ........................ 9
LANGUAGE SETTING ............................................................... 10
CAMERA ID SETTING............................................................... 11

Camera ID setting...................................................................... 11

SYNC SETTING (SYNC) ............................................................ 12
Power source synchronization (L-L) setting ............................ 12

PRIVACY MASK SETTING (PRIVACY MASK) ......................... 13
Mask setting ..............................................................................
PASSWORD setting ...................................................................
PASSWORD LOCK cancellation.................................................
PASSWORD changes .................................................................

13
15
16
16

LENS SETTING (LENS).............................................................. 17
FOCUS setting............................................................................ 17
ZOOM setting ............................................................................ 20

MIRROR SETTING..................................................................... 21
VIEW SETTING ITEM FLOW..................................................... 22
VIEW SETTING.......................................................................... 24

A IRIS setting ....................................................................................... 24
Autoiris setting (AUTO) ............................................................ 24
SENSE UP setting....................................................................... 29

E
F
G

LEVEL setting.............................................................................
Manual iris setting ....................................................................
WHITE BALANCE adjustment .........................................................
MWB setting .............................................................................
ATW setting...............................................................................
AWC setting ..............................................................................
Electronic SHUTTER setting ............................................................
Fast shutter speed (SHORT) mode setting..............................
Slow shutter speed (LONG) mode setting ..............................
MOTION detector setting ...............................................................
MOTION MASKING setting ......................................................
SENSITIVITY setting..................................................................
ZOOM setting............................................................................
INTERVAL setting......................................................................
ALARM SIGN setting.................................................................
Profile compensation setting (APERTURE) ....................................
Automatic gain control (AGC) setting ...........................................
GAMMA correction setting.............................................................

29
30
31
32
32
34
35
35
36
37
39
40
41
41
42
43
44
45

OPTION SETTING ..................................................................... 46
CONTROL setting ......................................................................
ADDRESS setting.......................................................................
ALARM setting ..........................................................................
A Alarm input setting (ALARM IN) .............................................
B Alarm output setting (ALARM OUT) .......................................
C Operation of alarm signal output to the System
Controller setting (LINE OUT) ..................................................

46
47
47
47
49
50

MENU FLOW............................................................................. 51
SPECIFICATIONS ...................................................................... 53

L5AA2/XE GB 2002, 4, 25

• Built in Interline transfer method 1/4” CCD, approx. 470,000
picture elements.
• High sensitivity, minimum required illumination is 2.0 lux.
(F1.6, gain max)
• More than 520 TV lines of horizontal resolution.
• Equipped with intelligent Backlight compensation.
• Special Gamma mode (contrast up)
• Built in high speed electronic shutter and slow shutter.
• 32X Electronic sensitivity
• Built in Digital Motion Detection
• Built in Privacy masking function
• 12VDC/24V AC dual operation(electrically isolate) .
• Internal sync. / Line Lock.
• 22x optical zoom and 16x electronic zoom.
• Coaxial control or RS485, operation via SSP.

ACCESSORIES
Clamping core ..........................................................................1 pc.

English

MAIN FEATURES

L5AA2/XE GB 2002, 4, 25

PRECAUTIONS

English

In case of problem
Do not use the camera if smoke or a strange odour comes from
the unit, or if it seems not to function correctly. Disconnect the
power cord immediately, and consult your dealer (or a Sanyo
Authorized Service Centre).
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause
damage to the unit. For internal settings and repairs, consult your
dealer (or a Sanyo Authorized Service Centre).
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get
inside the camera. If used with a foreign object inside, it could
cause a fire, short-circuits or damages.
If water or a liquid gets inside the camera, disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Service Centre). Be careful to protect the camera from rain, sea
water, etc.
Be careful when handling the unit
To prevent damages, do not drop the camera or subject it to
strong shock or vibration.
Install away from electric or magnetic fields
If installed close to a TV, radio transmitter, magnet, electric motor,
transformer, audio speakers the magnetic field they generate will
distort the image.

Protect from humidity and dust
To prevent damages to the camera, do not install it where there is
greasy smoke or steam, where the dampness may get too high,
or where there is a lot of dust.

Protect from high temperatures
Do not install close to stoves, or other heat generating devices,
such as spotlights, etc., or where it could be subject to direct
sunlight, as that could cause deformation, discoloration or other
damages.
Be careful when installing close to the ceiling, in a kitchen or
boiler room, as the temperature may raise to high levels.
Install where the temperature range will stay between –10° C and
50° C. (no condensation)
Cleaning
• Dirt can be removed from the cabinet by wiping it with a soft
cloth. To remove stains, wipe with a soft cloth moistened with
a soft detergent solution and wrung dry, then wipe dry with a
dry soft cloth.
• Do not use benzine, thinner or other chemical product on the
cabinet, as that may cause deformation and paint peeling.
Before using a chemical cloth, make sure to read all
accompanying instructions. Make sure that no plastic or
rubber material comes in contact with the cabinet for a long
period of time, as that may cause damage or paint peeling.

L5AA2/XE GB 2002, 4, 25

PARTS NAMES AND FUNCTIONS
3
SET

4
2

ZOOM
FOCUS

COM IN
ALARM OUT

VIDEO OUT

RS485
POWER

AC24V

A B
GND

6 24 V AC or 12 V DC input terminals (AC 24 V, DC 12 V,
6

DC12V

Connect the camera to the monitor, then press the SET
button for about 3 seconds to display the on-screen menu.
5 RS-485 control push-lock terminals (RS485, A, B, G)
Use a cable thicker than AWG22.
A: Twisted-pair cable terminal
G: Ground terminal
B: Twisted-pair cable terminal

English

4 Menu setting button (SET) (See p8)

Control
terminals

GND)

CLASS 2 WIRING

1 Video output connector (VIDEO OUT: BNC type)
Connect this connector to a device such as a time lapse VCR or
monitor with a VIDEO IN connector.

Lens cap
The cap is installed to protect the lens section. Remove the cap
when using the camera.

2 Power indicator (POWER)
Comes on when the power to the camera is on.
Note: After connecting the power supply the POWER indicator
will blink for 5 seconds. During this time no adjustments
using the menus or any other operation are possible.

3 Cursor button (See p8)
j: Press this button to move the cursor up.
c: Press this button to move the cursor to the right, or to
turn the settings ON/OFF etc.
d: Press this button to move the cursor to the left, or to turn
the settings ON/OFF etc.
l: Press this button to move the cursor down.

L5AA2/XE GB 2002, 4, 25

PARTS NAMES AND FUNCTIONS

English

Camera installation bracket
The bracket can be fixed at the top or bottom of the camera.
When fixing the bracket, be sure to use the longer screws and
install the shorter screws on the opposite side to seal the
openings.

CAUTION: When installing the camera bracket, select a location
that can support the total weight of the camera and
accessories.

Control terminals
1 Zoom terminal (ZOOM)
Sets the zoom to wide angle or telescoping.
2 Focus terminal (FOCUS)
Sets the focus to infinite or close range.
3 Grounding terminal (COM)
4 Alarm output terminal (ALARM OUT)
A detection alarm based on the motion sensor is sent to
connected equipment such as a buzzer or lamp or a time
lapse VCR device.
5 Alarm input terminal (ALARM IN)
Used for detection of intruders through a connected
external alarm switch.

12345

ZOOM
FOCUS

COM IN
ALARM OUT

L5AA2/XE GB 2002, 4, 25

CONNECTIONS
Basic connection for monitoring or recording
AC 24 V connection

(A)

AC24V

DC12V

DC 12 V connection
AC24V

GND

CLASS 2 WIR

DC12V

GND

CLASS 2 WIR

English

TV monitor
(sold separately)

Fig. 1

Time lapse VCR or
Digital video recorder
(sold separately)

Fig. 2

(Video signal connections)
: VIDEO IN
: VIDEO OUT

The peripheral devices (VCR, monitor, lens, etc.) and cables
are sold separately.

CAUTION:

To prevent camera and/or power supply failure, pay close
attention to polarity when making the connections.

Make the video signal connection between the camera
and the monitor or time lapse VCR.
When using this unit, the supplied clamping core A must be
installed on the power cord and BNC cable, in order to
prevent electromagnetic interference to the other devices
connected.
Power supply choices
• Use a commercially available 24 V AC adaptor. Make sure
to use a cable with an earth line (22AWG or more) to
connect to the grouding terminal. (Fig.1.)
• When using a DC 12 V power supply, make the
connections as indicated in Fig. 2.

Insert the plug of this power supply into a wall outlet.
The POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.

L5AA2/XE GB 2002, 4, 25

CONNECTIONS

English

Coaxial cable type and maximum length
• Cable type RG-59U (3C-2V), 250 m maximum.
• Cable type RG-6U (5C-2V), 500 m maximum.
• Cable type RG-11U (7C-2V), 600 m maximum.

CAUTION:
• The RG-59U type cable should not be run through electrical
conduits or through the air.
• Using CCTV/Video-grade coaxial cable.

Connection of peripheral equipment and
controller terminal
External alarm
switch
Buzzer or lamp

• Focus adjustment
DC–6V/12V: Infinite
DC+6V/12V: Close range
• Zoom adjustment
DC–6V/12V: Wide angle
DC+6V/12V: Telescoping

ABG

CAMERA IN
terminal
Multiplexer
(sold separately)

G AB

RS-485 connector

System controller (sold separately)

L5AA2/XE GB 2002, 4, 25

DISPLAYING/CLOSING THE MENU SCREEN
MAIN MENU screen

Sub-menu screen

MAIN MENU

Cursor button

SET button

Press the SET button for about 3 seconds.
The MAIN MENU screen will appear.

Using the cursor button
1 Use the cursor button (l) to move the cursor down.
When the cursor reaches the bottom of the screen, it goes
back up to the top of the screen.
2 Use the cursor button (j) to move the cursor up. When
the cursor reaches the top of the screen, it goes back
down to the bottom of the screen.
3 Use the cursor button (c) to move the cursor to the right.
This button is also used to change ON/OFF settings etc.
4 Use the cursor button (d) to move the cursor to the left.
This button is also used to change ON/OFF settings etc.

LANGUAGE
SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

LANGUAGE
LANGUE
SPRACHE

ENGLISH
FRENCH
GERMANY

‚
‚

English

SET

LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

‚
‚
MENU

BACK

Switching to sub-menu screens
Use the cursor button (j l d c) until an item with a “y”
next to it is flashing, then press the SET button.

Closing a settings screen
• To return to the previous screen, use the cursor button (l)
to select BACK for MENU, then press the SET button.
• To return to the normal screen, use the cursor button (d or
c) to select END for MENU, then press the SET button.

☞ Returning to the default setting
Use cursor button (l, then d or c) to change the PRESET
setting to ON, then press the SET button.

L5AA2/XE GB 2002, 4, 25

MENU ITEM FLOW AND MENU OPERATION
1 2 3 4 5 6 7 8

MAIN MENU

English

LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

1 LANGUAGE setting (See p10)
Choose from among English, French and German.
2 CAMERA ID setting (See p11)
3 SYNC setting (See p12)
Sets camera to internal synchronization (INT) or power source
synchronization (L-L).
Power source synchronization, the vertical synchronization phase
as adjusted on a sub-menu screen.
4 PRIVACY MASK setting (See p13)
This covers an area of the screen with a gray pattern for areas
that may infringe on privacy.
Gray patterns can be placed on up to 4 areas.
5 LENS setting (See p17)
Sets camera to automatic focus or manual focus. Zoom speed and
magnification is also set here.

6 MIRROR setting (See p21)
The image can be rotated horizontally then vertically or vertically
then horizontally.
7 VIEW SETTING (See p22)
Different detailed settings can be made for each camera (9
screens). After they are set, these are linked to “VIEW SETTING
(0 – 8)” settings for preset positions.
8 OPTION setting (See p46)
For setting communications conditions and alarms.

L5AA2/XE GB 2002, 4, 25

LANGUAGE SETTING
Select one of the languages shown on the menu screen (English, French, German).

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

LANGUAGE
LANGUAGE
LANGUE
SPRACHE

ENGLISH
FRENCH
GERMANY

‚
‚
‚
‚

LANGUE
LANGUAGE
LANGUE
SPRACHE

English

ANGLAIS
FRANCAIS
ALLEMAND

RETOUR

In the MAIN MENU, use the cursor button (j or l) to
select SET for LANGUAGE, then press the SET button.
The LANGUAGE screen will appear.

Use the cursor button (j or l) to move the cursor to
language (example: “FRENCH”) then press the SET
button.
The interface language becomes French.

Use the cursor button (j or l) to select RETUOR for
MENU, then press the SET button.
The MENU PRINCIPAL screen will reappear.
Information in the MAIN MENU screen will appear in the
selected language.

☞ Use the cursor button (l) to select FIN, then press the
SET button. The display will return to the normal
monitor screen.

L5AA2/XE GB 2002, 4, 25

CAMERA ID SETTING
Camera ID setting
Camera ID screen

Example: Setting the Camera ID to “CAM 1”
English

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
ON
INT
SET
SET
OFF
1
SET
OFF
END

CAMERA ID SETTING

‚
‚
‚
‚

2
3
4

????????????????
POSITION
SET ‚
PRESET
MENU

ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-‚

‚
‚

OFF
BACK

????????????????
POSITION
SET ‚
PRESET
MENU

OFF
BACK

1 Character selection palette:

Use the cursor button (j or l) to move the cursor to
CAMERA ID, and then use the cursor button (d or c) to
change the setting to ON. Then press the SET button.
The CAMERA ID SETTING screen will appear.

Use the cursor button (j l d c) to move the cursor to
the letter “C” in the character selection palette, then
press the SET button.

☞ After at least one character is displayed in the ID field,
the carriage return mark (y) will appear at the lower
right corner of the character selection palette. Selecting
this mark between the characters of the field will create
a new line at that place.

Use the same steps to select “A”, “M” and “1” from the
palette, then press the SET button.
The characters “CAM1” appear in the ID field.

CAM1????????????
-

By moving the cursor to letters or numbers in this
palette, you can select characters.
Selected characters will appear in the corresponding
field under ID.

2 ID:
The ID entry field shows 16 question marks (?). The ID
will not be displayed on the screen.

3 POSITION:
After characters are displayed in the ID field, moving
the cursor to the POSITION field with the cursor button
and pressing the SET button will display the camera ID
on the normal screen.

4 PRESET:
When this item is turned to ON, the ID fields are
cleared (question marks appear). Use this function
when you want to change the ID.

L5AA2/XE GB 2002, 4, 25

CAMERA ID SETTING

SYNC SETTING (SYNC)

Initial setting is internal synchronization (INT), so it does not need
to be set again. Follow the steps below to change the setting to
power source synchronization (L-L).

CAMERA ID SETTING

Camera ID

CAM1????????????

POSITION

SET

PRESET
MENU

OFF
BACK

Moving the on-screen title display position
Use the cursor button (j l d c) to move the title
display to the preferred position on the screen, then
press the SET button.
The CAMERA ID SETTING screen will reappear.

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

‚

(Displaying the ID on 2 lines.)
1 Use the cursor button (d or c) to move the cursor to the
location in the ID field where the carriage return is wanted.
2 Use the cursor button (j l d c) to move the cursor to
the carriage return mark (y) at the lower right corner of
the character selection palette, and then press the SET
button.

Power source synchronization (L-L) setting

CAM1

ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-‚

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

English

Use the cursor button (j or l) to move the cursor to
POSITION, and then press the SET button.
The camera ID will be displayed on one line.

L-L SETTING
(V SYNC PHASE)
ú------+------ü

‚
‚
‚
‚
PRESET
MENU

OFF
BACK

Use the cursor button (j l d c) to select L-L for
SYNC, then press the SET button.
The L-L SETTING screen will appear.

Use the cursor button (d or c) to adjust the position
of the vertical synchronization indicator shown on the
screen.
The numerical value will change, allowing adjustment of
vertical synchronization.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

PRIVACY MASK SETTING (PRIVACY MASK)
Mask setting

MAIN MENU

English

LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

PRIVACY MASK SETTING
PASSWORD LOCK
PASSWORD CHANGE
MASK SET

‚
‚

MASK NO.SELECT

MASK 3 SET
(POSITION)

MASK
MASK
MASK
MASK

‚
‚

1
2
3
4

OFF
OFF
SET
OFF

‚

MASK NO.SELECT
MASK
MASK
MASK
MASK

1
2
3
4

PRESET
MENU

OFF
OFF
OFF
OFF

Use the cursor button (j or l) to select SET for
PRIVACY MASK, then press the SET button.
The PRIVACY MASK SETTING screen will appear.

Use the cursor button (j or l) to move the cursor to
SET for MASK SET and press the SET button.
The MASK NO. SELECT screen will appear.

Note: When PASSWORD LOCK is ON, moving the cursor to
MASK SET and press the SET button to bring up a
password access screen. The password must be entered in
this screen.

ON ‚
SET ‚
SET ‚

OFF
BACK

SET

‚

Use the cursor button (j or l) to move the cursor to a
mask number (Ex: MASK 3), and then use the cursor
button (c) to change the setting to SET. Then press the
SET button.
The MASK 3 SET (POSITION) screen will appear, and SETy
will be blinking. The gray mask will appear in the center of the
screen.
Cursor button operation
OFF: to c side (ON appears), to c side again (SET appears)
• SET: Mask POSITION and SIZE can be set
• ON: Masks can be displayed
• OFF: Masks can be deleted

L5AA2/XE GB 2002, 4, 25

PRIVACY MASK SETTING (PRIVACY MASK)

MASK 1

MASK 3 SET

(SIZE)

2
SET

‚

PRESET
MENU

OFF
BACK

Use the cursor button (j l d c) to move the gray
mask, then press the SET button.
The SIZE screen will appear, and the mask that was positioned
in the POSITION screen will be displayed.

Use the cursor button (j l d c) to adjust the size of
the gray mask, then press the SET button.
PRESET and MENU will appear at the bottom of the screen.
Move the cursor to BACK for MENU and press the SET button.
The screen will return to MASK NO. SELECT.

English

(About the POSITION screen)
It is possible to set as many as 4 masks on the same POSITION
screen.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

PRIVACY MASK SETTING (PRIVACY MASK)
PASSWORD setting
You can lock the privacy masks in place as gray patterns after they have been set. The password requirement is initially set to OFF, but to
begin using it, you must enter the factory set password “1234”.
English

PRIVACY MASK SETTING
PASSWORD LOCK
PASSWORD CHANGE
MASK SET

BACK

SET ‚

1234
OK

BACK

Use the cursor button (j or l) to move the cursor to
OFF for PASSWORD LOCK in the PRIVACY MASK
SETTING screen. Then press the SET button.
The PASSWORD screen will appear.

Enter the factory set password “1234”.
Use the cursor button (j or l) to select “1”, then use
the cursor button (c).
To move the cursor to the next “*” digit.

1¤¤¤

PASSWORD

PRIVACY MASK SETTING
PASSWORD LOCK
PASSWORD CHANGE
MASK SET

¤¤¤¤
-

PASSWORD

OFF ‚
SET ‚
SET ‚

SET ‚

BACK

Use the same steps to enter “2,” “3,” and “4,” then press
the SET button.
“OK” will appear and BACK for MENU will be blinking. Press
the SET button again. The PRIVACY MASK SETTING screen
will reappear and “ON” will be blinking for PASSWORD LOCK.

Note: If a different password is required, “NG” will appear.
Please carefully maintain the password so that it will not be
forgotten.

L5AA2/XE GB 2002, 4, 25

PRIVACY MASK SETTING (PRIVACY MASK)
PASSWORD LOCK cancellation

PASSWORD changes

For use when PASSWORD LOCK is ON

PASSWORD

1
¤¤¤¤
-

SET ‚

1234
OK

PRIVACY MASK SETTING
PASSWORD LOCK
PASSWORD CHANGE
MASK SET

SET ‚

ON ‚
SET ‚
SET ‚

PASSWORD
(NOW PASSWORD)
1234
-

BACK

SET ‚

PASSWORD

(NOW PASSWORD)

(NEW PASSWORD)

English

You can change the password with PASSWORD LOCK in either
the ON or OFF setting.

PRIVACY MASK SETTING
PASSWORD LOCK
PASSWORD CHANGE
MASK SET

OFF ‚
SET ‚
SET ‚

Press the SET button.
The PASSWORD screen will appear.

Enter the factory set password “1234”.
Use the cursor button (j or l) to select “1”, then use
the cursor button (c).
To move the cursor to the next “*” digit.

****
-

SET ‚

****
-

SET ‚

Use the cursor button (j or l) to move the cursor to
SET for PASSWORD CHANGE and press the SET button.
The PASSWORD (NOW PASSWORD) screen will appear.

Use the cursor button (d or c, j) to enter the current
password (Ex: 1234), then press the SET button.
The PASSWORD (NEW PASSWORD) screen will appear.

Use the cursor button (d or c, j) to enter a new
password (Ex: 4321), then press the SET button.
“OK” will appear and BACK for MENU will be blinking. Press
the SET button again.
The PRIVACY MASK SETTING screen will reappear.

L5AA2/XE GB 2002, 4, 25

LENS SETTING (LENS)
This item allows adjustment of focus (for manual focus or autofocus) and adjustment of zoom when needed.

FOCUS setting

☞ Setting the manual focus (MANU)
English

Sets a limit for near distance focusing and sets focus speed for manual focus.

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS

SET
OFF
INT
SET
SET

‚

FOCUS SETTING

1M
2

LIMIT NEAR
SPEED

3M
2

LIMIT NEAR
SPEED

3M
3

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

‚
‚

LENS
FOCUS

MANU ‚

ZOOM

SET

‚

Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.

Use the cursor button (d or c) to select MANU, then
press the SET button.
The FOCUS SETTING screen will appear.

LIMIT NEAR focus distance setting
Use the cursor button (j or l) to move the cursor to
LIMIT NEAR, then use the cursor button (d or c) to
change the distance value. (Ex: 3M)
Available settings: 1M (meter), 3M, 5M, 10C (centimeters),
30C, 50C

Note: Focusing becomes difficult when near distance limit is set
to less than “1M”.

LIMIT NEAR
SPEED

SPEED of focus setting
Use the cursor button (j or l) to move the cursor to
SPEED, then use the cursor button (d or c) to select the
focus adjustment speed value. (Ex: 3)
Available settings: 1, 2, 3, 4 (Quickest speed)

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

LENS SETTING (LENS)
Sets a limit for near distance focusing and sets focusing sensitivity and focus iris.
Note: As a normal practice, use manual focus when keeping the camera focused on the same target object for a long period of time
(over 24 hours). This can be used with the one-push autofocus function when needed (operated from the system controller). Long
periods of surveillance with the autofocus in operation will shorten the work life of the lens.

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

LENS
FOCUS

AUTO ‚

ZOOM

SET

‚

FOCUS SETTING

LIMIT NEAR
SENSITIVITY
AREA

3M
HIGH
SET ‚

LIMIT NEAR
SENSITIVITY
AREA

3M
LOW
SET

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

English

☞ Setting the autofocus (AUTO)

‚

‚
‚
‚
‚

FOCUS SETTING
LIMIT NEAR
SENSITIVITY
AREA

1M
HIGH
SET ‚

Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.

Use the cursor button (d or c) to select AUTO, then
press the SET button.
The FOCUS SETTING screen will appear.

Setting focus SENSITIVITY
Use the cursor button (j or l) to move the cursor to
SENSITIVITY, then use the cursor button (d or c) to
change the setting. (Ex: LOW)
Available settings:
• HIGH: High sensitivity focusing
• LOW: Low sensitivity focusing

Note: When focus SENSITIVITY is set to HIGH, it may react to
even slight movements of the target object. In this case,
change the setting to LOW.

Note: Focusing becomes difficult when near distance limit is set
to less than “1M”.

L5AA2/XE GB 2002, 4, 25

LENS SETTING (LENS)
5

English

FOCUS SETTING
LIMIT NEAR
SENSITIVITY
AREA

3M
LOW
SET

PRESET
MENU

OFF
BACK

AREA SETTING

AREA

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

‚

Use the cursor button (j or l) to move the cursor to
SET for AREA, and press the SET button.
The AREA SETTING screen for AREA 2 (initial setting) will
appear to allow setting of focus target area.

Use the cursor button (d or c) to select the focus target
area. (Ex: 3)
The focus target area will become narrow.
Available settings: 1/full screen, 2/center of screen,
3/smaller center

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

LENS SETTING (LENS)
ZOOM setting

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

LENS
FOCUS

MANU ‚

ZOOM

SET

PRESET
MENU

OFF
BACK

‚

ZOOM SETTING

SPEED
EL ZOOM
V-RESO.UP

4
OFF
OFF

SPEED
EL ZOOM
V-RESO.UP

4
x4
OFF

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

‚
‚

English

Sets zooming speed and magnification power of the electronic zoom. This item also has a setting for improvement of vertical resolution of
still pictures.

‚
‚

Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.

Use the cursor button (j or l) to select SET for ZOOM,
then press the SET button.
The ZOOM SETTING screen will appear.

Zoom speed setting
Use the cursor button (d or c) to select the zooming
speed. (Ex: 4)
Available settings: 1, 2, 3, 4 (Quickest speed)

EL ZOOM (Electronic zoom) magnification setting
Use the cursor button (j or l) to move the cursor to EL
ZOOM, then use the cursor button (d or c) to select the
electronic zoom magnification power. (Ex: x4)
Available settings: OFF, x2, x4, x8, x16 (16 power)

L5AA2/XE GB 2002, 4, 25

LENS SETTING (LENS)
5

ZOOM SETTING
SPEED
EL ZOOM
V-RESO.UP

English

PRESET
MENU

MIRROR SETTING
1

4
x4
ON

OFF
BACK

V-RESO.UP (Vertical resolution) setting
Use the cursor button (j or l) to move the cursor to
V-RESO.UP, then use the cursor button (d or c) to
select the vertical resolution. (Ex: ON)

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

Note: When V-RESO.UP is set to “ON”, vertical resolution
sensitivity for still pictures in the electronic zoom field will
be improved but afterimages of moving objects will be
more conspicuous.

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

Use the cursor button (j or l) to move the cursor to
MIRROR, then use the cursor button (d or c) to select
the mirror image effect (Ex: H).
The image will be inverted horizontally. The image will change
as described below each time the cursor button is pressed.
• OFF: Normal image
• V: Inverted vertically
• H: Inverted horizontally • HV: Inverted horizontally and
vertically

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
Note:
V-RESO. UP will be automatically set to OFF when any of the
following settings is made.
• IRIS: AUTO item SENSE UP (activated)
• SHUTTER: LONG
• AGC: DNR (ON)

OFF

To return to the normal screen, use the cursor button
(l) to select END at the bottom of the screen, then press
the SET button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING ITEM FLOW
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

☞

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

‚
‚

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
OFF
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

B WHITE BALANCE adjustment (See p31)
This selects the white balance method to be used. Three white balance methods are available: auto
trace white balance (ATW), one-push automatic white balance (AWC), and manual white balance
(MWB). Default setting is auto trace white balance.

‚
‚

‚
‚
‚
‚
‚

☞ Signifies that VIEW
SETTING 1 is the camera
setting 1. The cursor
button can be used (d or
c) to select one of the
nine VIEW SETTING
patterns (0 – 8).

A
B
C
D
E
F
G

English

A IRIS setting (See p24)
This setting allows selection of IRIS to either autoiris (AUTO) or manual iris (MANU). Initial setting is
autoiris.

MAIN MENU

C Electronic SHUTTER setting (See p35)
This setting chooses either a fast shutter speed (SHORT) for target objects that may be moving quickly
or a slower shutter speed (LONG) for darker target objects.
D MOTION detector setting (See p37)
This function generates an alarm when a suspicious figure is detected. Each of the settings will enable
certain kinds of detection based on the natural image (swaying trees, flickers of light, etc.). It is also
possible to enable zooming in on target objects and intruders that have unusual brightness levels
(moving, bright) or are fast-moving.
E Profile compensation setting (APERTURE) (See p43)
This setting emphasizes the target object profile (horizontally or vertically).
F Automatic Gain Control (AGC) setting (See p44)
This sets the gain of the AGC circuit. When a target object is dark, the gain changes and the object
becomes lighter.
G GAMMA correction setting (See p45)
This setting enables contrast sensitivity to be boosted by controlling the gamma characteristics. Three
gamma controls are available: gamma correction (ON), smart gamma correction 1 (SMART 1), and
smart gamma correction 2 (SMART 2). Initial setting is ON.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING ITEM FLOW

English

(About creating image setting files in VIEW SETTING)
You can set 9 different patterns with view files. Use the cursor
button (d or c) to change the file number (1) for VIEW SETTING
and press the SET button. The selected image setting file will
appear. Neither the mask function nor the motion detector
function can be used with image setting file “0”, so they will not
appear as options in the screen for pattern 0.
MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

VIEW SETTING 1
SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

SHUTTER

‚
‚

PRESET
MENU

OFF
BACK

‚
‚
‚
‚
‚

(Screen for image setting 0)

MOTION

AUTO: SENSE UP (activated)

MANU: EI (ON)

LONG

SHORT

F: Function is set T: Not allowable E: Allowable

VIEW SETTING 0
AUTO
ATW
LONG
--ON
ON
ON

IRIS

‚
‚
‚

(Screen for image setting 1 – 8)

IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

Note: When each of the following functions is ON (shown by
single circle), it may be possible to use other functions in
conjunction with it (shown by double circle). View columns
vertically to determine which functions can be used
together.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
A IRIS setting
There are 2 possible settings for IRIS, autoiris (AUTO) and manual iris (MANU).

Autoiris setting (AUTO)

English

Sets backlight compensation, magnification of electronic
sensitivity and iris level.
VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

‚
‚
‚
‚
‚
‚

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear and AUTO for IRIS will
be blinking.
Available settings:
• AUTO: Sets automatic adjustment of iris.
• MANU: Sets manual adjustment of iris.

Press the SET button.
The IRIS SETTING screen will appear.

Note: When AUTO is selected, the following 3 types of detailed
backlight compensation settings will be available.
• Multi-spot evaluative metering (MULT)
• 5 spot centerweighted average metering (CENT)
• 48 multi-spot metering (MASK)

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Backlight compensation additional settings 1
• Multi-spot evaluative metering (MULT)

IRIS SETTING

English

BLC
SENSE UP

MULT ‚
OFF

(LEVEL)
í-----ú+------ü

BLC SETTING
(BLC WEIGHT)
í------ú------ü

(BRIGHT)
í------ú------ü

Use the cursor button (j or l) to move the cursor to
BLC, then use the cursor button (d or c) to select a
backlight compensation method. (Ex: MULT) Then press
the SET button.
The BLC SETTING screen will appear.

Available settings:
• MULT (Multi-spot evaluative metering): Evaluates the entire
screen and corrects according to the best image obtained.
• CENT (5 spot centerweighted average metering): Measures
light mainly at the center and corrects according to the best
image obtained. (See p26)
• MASK (48 multi-spot metering): Covers bright areas such as
persons with mask patterns and treats light measurement
output as irrelevant. (See p28)

Use the cursor button (d or c) to select the value of
BLC WEIGHT. (Sets backlight and brightness level.)
Available settings: 0 – 15

Note: The larger the number, the more backlighting works.

Use the cursor button (j or l) to move the cursor to
BRIGHT, and then use the cursor button (d or c) to
select the compensation level.
Available settings: 0 – 15

Note: When the number becomes larger, it brightens, and the
compensation level can be set for the brightness of the
backlighting.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
Note: When using multi-spot evaluative metering, the
background behind the target object will become very
dark. If a target image in the center of the image is too
bright while using the multi-spot evaluative metering
mode, switch to the 5 spot centerweighted average
metering mode.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Backlight compensation additional settings 2
• 5 spot centerweighted average metering (CENT)

IRIS SETTING
BLC
SENSE UP

CENT ‚
OFF

BLC SETTING

BLC SETTING
(SIZE)

(POSITION)

(LEVEL)
í-----ú+------ü
PRESET
MENU

English

OFF
BACK

Use the cursor button (d or c) to select CENT, then
press the SET button.
The BLC SETTING (POSITION) screen will appear.

Use the cursor button (j l d c) to shift the position
of the central light sensing zone.
The zone can be moved up or down and left or right.

Use the cursor button (j l d c) to adjust the size of
the central light sensing zone.

Press the SET button.
The BLC WINDOW WEIGHTING screen will appear.

Note:
• If the zone fills the right side it will become smaller.
• If the zone fills the bottom side it will become smaller.

Press the SET button.
The BLC SETTING (SIZE) screen will appear.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Example of setting the mask in the center weighting position.

BLC WINDOW WEIGHTING

English

0
0
0
0
7

TOP
BOTTOM
LEFT
RIGHT
CENTER(FIX)

0
0
0
0
7

TOP
BOTTOM
LEFT
RIGHT
CENTER(FIX)

0
0
0
0
7

TOP
BOTTOM
LEFT
RIGHT
CENTER(FIX)

0
0
0
0
7

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

Use the cursor button (j or l) to select a zone, then
use the cursor button (d or c) to adjust weighting.
Each setting will change as shown in the illustration.
The area from each of the zones 0 – 7, except CENTER, can
be adjusted.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

BLC WINDOW WEIGHTING

TOP
BOTTOM
LEFT
RIGHT
CENTER(FIX)

1 TOP: Weighting is at top.
2 BOTTOM: Weighting is at bottom.
3 LEFT: Weighting is at left.
4 RIGHT: Weighting is at right.
5 CENT (FIX): Center weighting is fixed by the number 7.

BLC WINDOW WEIGHTING
TOP
BOTTOM
LEFT
RIGHT
CENTER(FIX)

0
0
0
0
7

PRESET
MENU

OFF
BACK

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Backlight compensation additional settings 3
• 48 multi-spot metering (MASK)

IRIS SETTING
BLC
SENSE UP

BLC MASKING

CONTINUE (ñ)

English

MASK ‚
OFF

(LEVEL)
í-----ú+------ü
PRESET
MENU

OFF
BACK

Use the cursor button (d or c) to select MASK, then
press the SET button.
The BLC MASKING screen will appear and the mask pattern
will be blinking.

Use the cursor button (j l d c) to move the cursor to
move the mask pattern over the area not to be sensed,
then press the SET button.
The mask pattern will be set. You can use the same steps to
set additional mask patterns.

Note: The initial mask pattern is at the upper left of the screen,
and it is not set. To clear a mask pattern after it is set,
press the SET button again.

Finishing mask pattern setting
Use the cursor button (j or l) to move a mask pattern to
the bottom area of the screen and continue holding it for 3
seconds. The PRESET and MENU items will appear on the
screen.
• Use the cursor button (l) to select BACK for MENU and
press the SET button. The IRIS SETTING screen will
reappear.
• Use the cursor button (l) to move the cursor to BACK for
MENU, use the cursor button (d or c) to select END, and
then press the SET button. The normal screen will reappear.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
SENSE UP setting

LEVEL setting
IRIS SETTING

IRIS SETTING
BLC
SENSE UP

BLC
SENSE UP

MULT
x4

English

(LEVEL)
í-----ú+------ü
PRESET
MENU

OFF
BACK

í----ú-+------ü
PRESET
MENU

OFF
BACK

Use the cursor button (j or l) to move the cursor to
SENSE UP, then use the cursor button (d or c) to select the
power of the electronic sensitivity. (Ex: x4)

Use the cursor button (j or l) to move the cursor to
LEVEL, then use the cursor button (d or c) to adjust the iris
level.

Available settings: OFF, x2, x4, x8, x16, x32

Available settings: 0 – 100

Note:
• Electronic sensitivity boosting (SENSE UP) automatically
lengthens the CCD exposure time in dark situations.
Accordingly, do not use for light target objects. Because
exposure time is lengthened while in operation, moving target
objects may cause conspicuous afterimages and blurs.
• It is not possible to set SENSE UP (activated) or SHUTTER
(LONG) when MOTION is set to “ON”.
• When SENSE UP is activated for IRIS SETTING, the electronic
shutter cannot be forcibly moved.

Note: The larger the number, the more it brightens.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

MULT
x4

(LEVEL)

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Manual iris setting
Sets electronic iris ON/OFF, lens aperture and iris level.

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION

SET
OFF
INT
SET
SET
OFF
1
SET

‚
‚
‚
‚
‚

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

MANU
ATW
LONG
OFF
ON
ON
ON

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.

Use the cursor button (d or c) to select MANU, then
press the SET button.
The IRIS SETTING screen will appear.

Electronic IRIS setting
Use the cursor button (d or c) to select El. (Ex: ON)

Note: When SENSE UP is activated for IRIS SETTING, the
electronic shutter cannot be forcibly moved.

Lens aperture setting
Use the cursor button (j or l) to move the cursor to IRIS
STOP, then use the cursor button (d or c) to select the value.
Available settings: 1 – 17 (Aperture opening)

Note:
• The smaller the value the more the aperture closes and the
image darkens.
• Changes to the value directly control the aperture of the lens.

ON
(IRIS STOP)
í------+------ú

‚
‚

(LEVEL)
í----ú-+------ü

IRIS SETTING
EI

‚
‚
‚

IRIS SETTING
EI

(IRIS STOP)
í------+------ú

(LEVEL)
í----ú-+------ü

English

Use the cursor button (j or l) to move the cursor to
LEVEL, then use the cursor button (d or c) to select the
value.
Available settings: 0 – 100 (Level of opening)

Note:
• The smaller the value the more the video level drops,
becoming darker.
• The LEVEL setting controls both AGC circuit gain and shutter
speed, changing the amount of exposure.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
Note:
• If the iris views an unusually bright image, it can cause a
smear that cannot be corrected by adjusting the light entering
through the lens. In this case, arrange the physical angle of
lighting in a way that will prevent on-screen smearing.
• If flickering of the target object occurs because of florescent
lighting in the camera location, changing to incandescent
lighting will prevent the flickering.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
B WHITE BALANCE adjustment
Adjustments can be made to 3 methods of white balance correction: Auto trace white balance (ATW), one-push automatic white balance
(AWC), and manual white balance (MWB).
English

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
MWB
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

‚
‚
‚
‚
‚

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.

The following methods are available for white balance correction.
See the corresponding reference sections for additional setting
options.

Use the cursor button (j or l) to move the cursor to
WHITE BALANCE, then use the cursor button (d or c)
to select a white balance type “MWB”. Then press the
SET button.
The MWB SETTING screen will appear.

Available methods:
ATW (Auto trace white balance)
Even when light sources change, automatic adjustment assures
capture of most suitable colors. When a bright light source
prevents effective white balance, a mask can be placed over the
light source. (See p32)
AWC (One-push automatic white balance)
White balance is adjusted automatically with one-push activation.
AWC is usually set for white target objects (walls, paper, etc.) that
do not return color faithfully in the ATW method. (See p34)
MWB (Manual white balance)
Fine adjustments for preferred colors can be done manually. This
method is preferable when suitable colors cannot be obtained
with the ATW method. (See p32)

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
White balance additional settings 1

White balance additional settings 2

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

ATW setting
AUTO
MWB
LONG
OFF
ON
ON
ON

‚
‚
‚
‚
‚

MWB SETTING
(OFFSET)
R í---ú--+------ü

B í---ú--+------ü

Use the cursor button (j or l) to move the cursor to
WHITE BALANCE, then use the cursor button (d or c)
to select a white balance type (Ex: MWB). Then press the
SET button.
The MWB SETTING screen will appear.
Use the cursor button (d or c) to adjust the value for
“R” (red).
Available settings: 0 – 255
Note: The larger the number, the stronger red becomes.

Use the cursor button (j or l) to move the cursor to
“B”, then use the cursor button (d or c) to adjust the
“Blue” value.
Available settings: 0 – 255

Automatic white balance settings are completed when ATW is
selected. However, white balance will not be suitably adjusted if a
bright light source or an excessively dark area from the
environment is in the image. In this case, the bright light source or
dark area should be masked so that it will not be detected.

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

‚
‚
‚
‚
‚
‚

English

MWB setting

ATW SETTING
MASKING

SMART ATW

OFF

‚

Use the cursor button (j or l) to move the cursor to
ATW for WHITE BALANCE and press the SET button.
The ATW SETTING screen will appear.

Use the cursor button (d or c) to select ON for
MASKING, then press the SET button.
The ATW MASKING screen will appear with the mask pattern
blinking in the upper left corner of the screen.

Note: The larger the number, the stronger blue becomes.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
3

ATW MASKING

English

CONTINUE (ñ)

ATW MASKING

Use the cursor button (j l d c) to move the mask
pattern over the bright light source, then press the SET
button.
Use the same steps to place addition masks as needed.

Use the cursor button (j or l) to move a mask pattern
to the bottom area of the screen and continue holding
the cursor button straight down for 3 seconds.
The PRESET and MENU items will appear on the screen. Use
the cursor button (j or l) to select BACK, then press the
SET button. The ATW SETTING screen will reappear.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

ATW SETTING
MASKING

SMART ATW

PRESET
MENU

‚

ATW SETTING
MASKING

OFF

SMART ATW

OFF
BACK

PRESET
MENU

OFF
BACK

‚

CONTINUE (ñ)

Note: Initial settings place no masks on the screen. To cancel the
placement of masks, press the SET button again.

☞ SMART ATW setting
If saturation is high or a scene is bright, the most suitable colors
may not be obtained. In this case, set the SMART ATW to ON.

Use the cursor button (j or l) to move the cursor to
SMART ATW, then use the cursor button (d or c) to set
ON.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
White balance additional settings 3
AWC setting

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
AWC
LONG
OFF
ON
ON
ON

‚
‚
‚
‚
‚
‚

AWC SETTING
AWC LOCK

SET

GO TO MWB

SET

‚

Use the cursor button (j or l) to move the cursor to
AWC for WHITE BALANCE and press the SET button.
The AWC SETTING screen will appear.

With SET blinking for AWC LOCK, press the SET button.
SET will light and adjustment of white balance will begin. After
about 3 seconds, SET will begin blinking again, signaling that
adjustment is complete.

Note:
For even finer adjustment of coloration, choose SET for GO TO
MWB. White balance mode will become MWB for fine
adjustment. After fine adjustment with GO TO MWB, the white
balance mode will automatically switch to MWB.
Note: Full adjustment may not be possible with just one
activation of SET for AWC LOCK. In that case, press the
SET button again.

AWC SETTING
AWC LOCK

SET

GO TO MWB

SET

MWB SETTING
(OFFSET)

‚

R í---ú--+------ü

B í---ú--+------ü

GO TO MWB setting
Use the cursor button (j or l) to move the cursor to
SET for GO TO MWB and press the SET button.
The MWB SETTING screen will appear and the “R” value will
be blinking.

Use the cursor button (d or c) to adjust the value for
“R” (red).
Available settings: 0 – 255

English

Note: The larger the number, the stronger red becomes.

Use the cursor button (j or l) to move the cursor to
“B”, then use the cursor button (d or c) to adjust the
“Blue” value.
Available settings: 0 – 255

Note: The larger the number, the stronger blue becomes.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
C Electronic SHUTTER setting
Sets the electronic shutter to either the fast shutter speed mode (SHORT) or the slow shutter speed mode (LONG).

Fast shutter speed (SHORT) mode setting
English

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

VIEW SETTING 1

ES SETTING

IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO ‚
ATW ‚
SHORT‚
OFF
ON
‚
ON
‚
OFF

SHUTTER SPEED

PRESET
MENU

OFF
BACK

PRESET
MENU

OFF
BACK

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.

Use the cursor button (j or l) to move the cursor to
SHUTTER, then use the cursor button (d or c) to select
the speed mode for the electronic shutter. (Ex: SHORT)
Then press the SET button.
The ES SETTING screen will appear and 50 (1/50 sec) will be
blinking. This setting is suitable for fast moving target objects.

Use the cursor button (d or c) to select a electronic
shutter speed.
Available settings: 50, 120, 250, 500, 1000, 2000, 4000,
10000

Note: SHORT mode cannot be set if SENSE UP is activated or IRIS
is “ON”.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Slow shutter speed (LONG) mode setting

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

‚
‚
‚

ES SETTING
SHUTTER SPEED

PRESET
MENU

OFF
BACK

English

‚
‚

Use the cursor button (j or l) to move the cursor to
SHUTTER, then use the cursor button (d or c) to select
the speed mode for the electronic shutter. (Ex: LONG)
Then press the SET button.
The ES SETTING screen will appear and x1 (1/50 sec) will be
blinking. This setting is suitable for dark target objects.

Note:
SHUTTER (LONG) cannot be set if any of the following settings is
active.
• MOTION: ON
• IRIS: AUTO item SENSE UP (activated) or MANU item El
(ON)

Note: When a shutter speed is set, it can also be adjusted with
the “ELS” button on the system controller.

Use the cursor button (d or c) to select a electronic
shutter speed.
Available settings: x1, x2, x4, x8, x16, x32 (Field times
shown as multiples.)

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING

English

D MOTION detector setting
This function divides the monitor screen into 48 zones (8 x 6). Based on information from the separate zones, target images that show
intruder movements are detected and an alarm is generated. The degree of motion to be detected can be finely set.
Note:
• Before activating this setting, use the cursor button to select a surveillance location that will not detect motion.
• When SHUTTER speed is in LONG mode and IRIS SETTING has SENSE UP activated, the MOTION function cannot be turned ON.

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

AUTO
ATW
OFF
ON
ON
ON
ON

PRESET
MENU

OFF
BACK

MOTION SETTING

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

‚
‚
‚
‚
‚

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.

Use the cursor button (j or l) to move the cursor to
MOTION, and then use the cursor button (d or c) to
select ON. Then press the SET button.
The MOTION SETTING screen will appear and SET for SIZE will
be blinking.

SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN

SET
ON
SET
OFF
5S
OFF

PRESET
MENU

OFF
BACK

‚
‚
‚

MOTION SIZE
V
H

PRESET
MENU

1
1

OFF
BACK

MOTION SIZE setting
Sets the target object size desired for detection in the 48 zone
screen.
Press the SET button again.
The MOTION SIZE screen appears and the “1” for “V” will be
blinking.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Set the size of the target object desired for detection
1 Determine the vertical size
Tilt the cursor button to the right (c).
The “V” value (vertical pattern) will change to “2” and the
detection pattern will expand downward. Repeating this
motion will expand the pattern in the up and down
direction. Tilting the cursor button to the left will reduce
the pattern size.
2 Determine the horizontal size
Use the cursor button (l) to move the cursor to the
“1” for “H”, then tilt the cursor button to the right
(c).
The “H” value (horizontal pattern) will change to “2” and the
detection pattern will expand to the left. Repeating this
motion will expand the pattern in the left and right direction.
Tilting the cursor button to the left will reduce the pattern
size.

☞ To close the menu screen or return to the previous

MOTION SIZE
V
H

MOTION SIZE

1
1

PRESET
MENU

V
H

OFF
BACK

V1, H1
MOTION SIZE
V
H

OFF
BACK

MOTION SIZE
V
H

OFF
BACK

V2, H3

V
H

OFF
BACK

V1, H2

PRESET
MENU

3
3

PRESET
MENU

OFF
BACK

V3, H3
MOTION SIZE

MOTION SIZE

1
2

OFF
BACK

V6, H1

2
3

PRESET
MENU

6
1

PRESET
MENU

V2, H1

V
H

MOTION SIZE

PRESET
MENU

V
H

MOTION SIZE

V2, H2

V
H

PRESET
MENU

2
2

PRESET
MENU

MOTION SIZE

2
1

English

V
H

1
3

OFF
BACK

V1, H3

PRESET
MENU

1
8

OFF
BACK

V1, H8

screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
MOTION MASKING setting
Masking target objects that are not desired for detection (swaying trees, flickers of light , etc.) will prevent unwanted alarms from being
generated. This is done in the MOTION SETTING screen.
English

MOTION SETTING
SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN

SET
ON
SET
OFF
5S
OFF

PRESET
MENU

OFF
BACK

MOTION MASKING

‚
‚
‚

CONTINUE (ñ)

Use the cursor button (j or l) to move the cursor to
MASKING, and then use the cursor button (d or c) to
select ON. Then press the SET button.
The MOTION MASKING screen will appear, and the mask
pattern will be blinking in the upper left corner of the screen.

Use the cursor button (j l d c) to move the mask
pattern to the target object that is not to be detected,
then press the SET button.
Repeat these steps to set mask patterns in other locations.
Note: To clear a mask pattern, press the SET button again on
the pattern.

☞ To close the menu screen or return to the previous

Finishing motion pattern setting
Use the cursor button (j or l) to move a mask pattern to
the bottom area of the screen and continue holding it for 3
seconds. The PRESET and MENU items will appear on the
screen.
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
Available settings: 1 – 10

MOTION SETTING
SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN

SET
ON
SET
OFF
5S
OFF

SENSITIVITY
‚
‚
‚

MOVE
Y-LEVEL
Y-DIFFER
DURATION
DEMO

í---ú----ü
í---ú----ü
í---ú----ü
ú--------ü

5
5
5
1

OFF

Use the cursor button (j or l) to move the cursor to
SENSITIVITY, and then use the cursor button (d or c) to
select SET. Then press the SET button.
The SENSITIVITY screen will appear.

When necessary, adjust the following settings.

☞ Motion sensitivity (MOVE) setting
Use the cursor button (j or l) to move the cursor to
MOVE, then use the cursor button (d or c) to adjust the
movement value.
To avoid detection of small movements such as wind, make the
value larger.
Available settings: 1 – 10

☞ Brightness level (Y-LEVEL)
Use the cursor button (j or l) to move the cursor to
Y-LEVEL, then use the cursor button (d or c) to adjust the
brightness level.
When noise from a dark screen is causing erroneous detections,
make the value larger.

☞ Brightness differences (Y-DIFFER)
Use the cursor button (j or l) to move the cursor to
Y-DIFFER, then use the cursor button (d or c) to adjust the
brightness differences.
Changes in brightness can sometimes be mistakenly detected as
motion. To avoid detection of the turning on and off of lighting,
make the value larger.
Available settings: 1 – 10

English

SENSITIVITY setting
Set the degree of sensitivity for motion detection corresponding
to MOTION SIZE. Sensitivity can be set so that natural motions on
the screen such as wind and light changes will not be detected.
When this is necessary, activate the following setting.

☞ DURATION setting
Use the cursor button (j or l) to move the cursor to
DURATION, then use the cursor button (d or c) to adjust
the detection time duration.
To avoid detecting fast movements, make the value larger.
Available settings: 1 – 60

☞ Detected motion confirmation mode (DEMO)
Use the cursor button (j or l) to move the cursor to
DEMO, then use the cursor button (d or c) to change ON.
When a motion is detected, patterns are shown in that location.
While the detected motion is being confirmed, the SENSITIVITY
settings are optimized. This mode can only be activated in the
SENSITIVITY setting screen.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
ZOOM setting

INTERVAL setting

This item is set in the MOTION SETTING screen.

MOTION SETTING

English

SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN

SET
ON
SET
OFF
5S
OFF

PRESET
MENU

OFF
BACK

‚
‚
‚

SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN

SET
ON
SET
OFF
5S
OFF

PRESET
MENU

OFF
BACK

‚
‚
‚

Use the cursor button (j or l) to move the cursor to
ZOOM, then use the cursor button (d or c) to select the
zoom magnification power (Ex.: x2).

Use the cursor button (j or l) to move the cursor to
INTERVAL, then use the cursor button (d or c) to select the
time interval (Ex.: 15S).

Available settings: OFF, x1.4, x2, x2.8, x4, x6

Available settings: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M,
5M

Note:
• When a suspicious motion is detected, the camera zooms in
according to the set magnification power. The zoom takes
effect for 5 seconds and then returns to the previous
magnification level.
• The zoom focuses on the center of the screen. If the
maximum optical performance is exceeded, zooming will stop
at maximum magnification.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

This item is set in the MOTION SETTING screen.

Note: When a motion is detected, no other motions will be
detected within the set interval of time.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
ALARM SIGN setting
This item is set in the MOTION SETTING screen.

SET
ON
SET
OFF
5S
OFF

PRESET
MENU

OFF
BACK

‚
‚
‚

English

MOTION SETTING
SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN

Use the cursor button (j or l) to move the cursor to OFF
for ALARM SIGN, and then use the cursor button (d or c)
to select ON.
Available settings:
• ON: The camera ID display blinks when motion is detected.
• OFF: The camera ID display does not blink when motion is
detected.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
E Profile compensation setting (APERTURE)
Set this function to further emphasize the profile of the target object. The amount of compensation can be adjusted for horizontal or
vertical directions.
English

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

‚
‚
‚
‚
‚
‚

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.

Use the cursor button (j or l) to move the cursor to
APERTURE and then use the cursor button (d or c) to
select ON. Then press the SET button.
The APERTURE SETTING screen will appear and the “H” value
will be blinking.

APERTURE SETTING
H í------ú------ü

V í------ú------ü

PRESET
MENU

OFF
BACK

Select the amount of profile compensation
Available settings: 1 – 15 (Compensation intensity)
1 Set the horizontal profile compensation
Use the cursor button (d or c) to adjust the value for
“H” (horizontal).
2 Set the vertical profile compensation
Use the cursor button (j or l) to move the cursor to “V”
(vertical), then use the cursor button (d or c) to adjust
the value for “V”.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
F Automatic gain control (AGC) setting
Sets AGC to ON or OFF and adjusts the gain.

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING

SET
OFF
INT
SET
SET
OFF
1

‚
‚
‚
‚

GAIN SETTING

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

‚
‚
‚

MAX GAIN

±0·

DNR

OFF

(When OFF is set)
GAIN SETTING

ú------+------ü

0·

English

(When ON is set)

‚
‚

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.

Use the cursor button (j or l) to move the cursor to
AGC, and then use the cursor button (d or c) to select
the compensation level.
Available settings:
• ON: DNR (digital noise reduction) can be set
• OFF: Fixed gain values can be adjusted manually.

☞ When ON is set
1 Use the cursor button (d or c) to select ON then press
the SET button.
The GAIN SETTING screen will appear, and “±0dB” will be
blinking for MAX GAIN.
2 Use the cursor button (d or c) to select the gain.
Available settings: –6dB, ±0dB, +6dB, +9dB

3 Use the cursor button (j or l) to move the cursor to
DNR, and then use the cursor button (d or c) to select
ON.

Available settings:
• ON: DNR (Digital Noise Reduction) is applied. Noise from
low light will be reduced.
• OFF: DNR will not be applied.
Note: Digital noise reduction works as gain control becomes
greater. If images for moving target objects have blurs or
afterimages, reduce the resolution sensitivity.

☞ When OFF is set
1 Use the cursor button (d or c) to select OFF, then press
the SET button.
The GAIN SETTING screen will appear, and “0dB” will be
blinking.
Available settings: 0 – 30dB

2 Use the cursor button (d or c) to adjust the gain.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

VIEW SETTING
G GAMMA correction setting
In addition to turning gamma correction ON or OFF, contrast sensitivity can be boosted at 2 levels.

MAIN MENU

English

LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚
‚
‚
‚
‚

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

‚
‚
‚
‚
‚

Use the cursor button (j or l) to move the cursor to
VIEW SETTING, then press the SET button. (Ex: 1)
The VIEW SETTING 1 screen will appear.

Use the cursor button (j or l) to move the cursor to
ON for GAMMA, then use the cursor button (d or c) to
select the gamma correction.
Available settings:
• OFF: No gamma correction
• ON: Gamma correction (γ = 0.45)
• SMART 1: Correction 1
• SMART 2: Correction 2 (improves contrast for dark
locations)

Note: When using SMART 1 or SMART 2, the target object may
be too bright, so determine which setting is better for the
target object.

☞ To close the menu screen or return to the previous

screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

OPTION SETTING
2

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION

SET
OFF
INT
SET
SET
OFF
1
SET

‚

OPTION
CONTROL
ADDRESS
ALARM

485
0
SET

RS-485 SETTING

‚

BAUD RATE

19200

BAUD RATE

19200

‚

TERMINATE

OFF

TERMINATE

OFF

‚
‚

English

‚
‚

CONTROL setting

Use the cursor button (j or l) to move the cursor to
OPTION, then press the SET button.
The OPTION screen will appear.

Note: The PRESET ON setting cannot be used when OPTION
settings are in use.

Use the cursor button (j or l) to move the cursor to
485 for CONTROL, use the cursor button (d or c) to
select the device to be operated (Ex: 485), and then press
the SET button.
The RS-485 SETTING screen will appear.
Available settings:
• 485: For operation by the System Controller
• COAX: For operation of device by linked coax cable.

Use the cursor button (d or c) to select 19200 for BAUD
RATE.
Available settings: 19200, 9600, 4800, 2400

Use the cursor button (j or l) to move the cursor to
TERMINATE, and then use the cursor button (d or c) to
select the terminate setting.

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

OPTION SETTING
1

MAIN MENU

English

LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION

SET
OFF
INT
SET
SET
OFF
1
SET

‚

ALARM setting

OPTION
CONTROL
ADDRESS
ALARM

485
0
SET

‚
‚

‚
‚
‚
‚

ADDRESS setting

Make the following settings for alarm detection.
Connect the external alarm switch to the alarm input terminal on
the back of the camera.

Use the cursor button (j or l) to move the cursor to
ADDRESS, and then use the cursor button (d or c) to
select the address.
Available settings: 0 (d) ~ 127 (c)

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION

Use the cursor button (j or l) to move the cursor to
OPTION, then press the SET button.
The OPTION screen will appear.

Note: The PRESET ON setting cannot be used when OPTION
settings are in use.

A Alarm input setting (ALARM IN)

SET
OFF
INT
SET
SET
OFF
1
SET

‚

OPTION
CONTROL
ADDRESS
ALARM

485
0
SET

‚

‚
‚
‚
‚

Use the cursor button (j or l) to move the cursor to
OPTION, then press the SET button.
The OPTION screen will appear.

Note: The PRESET ON setting cannot be used when OPTION
settings are in use.

Use the cursor button (j or l) to move the cursor to
ALARM, then press the SET button.
The ALARM SETTING screen will appear.

Use the cursor button (d or c) to select POLARITY
between “NO” and “NC”.

Available settings:
• NO: Normal open (Normally open so closed condition is
detected as input.)
• NC: Normal closed (Normally closed so open condition is
detected as input.)

‚

L5AA2/XE GB 2002, 4, 25

OPTION SETTING
ALARM SETTING
ALARM IN
POLARITY
MOTION
DURATION
ALARM OUT
POLARITY
ALARM TIME
LINE OUT

Alarm duration setting (DURATION)
Set the duration for the following alarm input reception.

NO
OFF
5S
OFF
NO
5S
OFF

Motion sensor input setting (MOTION)
Matches information from the camera’s motion sensor and the
external alarm and outputs it.
Use the cursor button (j or l) to move the cursor to
MOTION, then use the cursor button (d or c) to select the
input.

Use the cursor button (j or l) to move the cursor to
DURATION, then use the cursor button (d or c) to select
the alarm duration.
Available settings: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M,
5M

English

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

Available settings:
• OFF: Does not output a motion sensor alarm.
• AND: Outputs an alarm when an external alarm input and
motion sensor alarm are detected at the same time.
• OR: Outputs an alarm if either an external alarm or a motion
sensor alarm is detected.

L5AA2/XE GB 2002, 4, 25

OPTION SETTING
B Alarm output setting (ALARM OUT)
1
English

ALARM SETTING
ALARM IN
POLARITY
MOTION
DURATION
ALARM OUT
POLARITY
ALARM TIME
LINE OUT

NO
OFF
5S
OFF
NO
5S
OFF

ALARM SETTING
ALARM IN
POLARITY
MOTION
DURATION
ALARM OUT
POLARITY
ALARM TIME
LINE OUT

NO
OFF
5S
OFF
NO
5S
OFF

Use the cursor button (j or l) to move the cursor to
ALARM OUT, then use the cursor button (d or c) to
select the “ON” or “ OFF”.

Available settings:
• ON: Output an alarm (for activation of buzzer or lamp)
• OFF: Does not output an alarm

Use the cursor button (j or l) to move the cursor to
POLARITY, then use the cursor button (d or c) to select
the “NO” or “NC”.

Available settings:
• NO: Normal open (Normally open so closed condition is
detected as input.)
• NC: Normal closed (Normally closed so open condition is
detected as input.)

Use the cursor button (j or l) to move the cursor to
ALARM TIME, then use the cursor button (d or c) to
select the amount of time for external alarm output.

Available settings: 5S, 10S, 15S, 20S, 30S, 1M, 2M, 3M, 4M,
5M

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

OPTION SETTING
c Operation of alarm signal output to the System

English

Controller setting (LINE OUT)
Outputs alarm signal to the System Controller. The ALARM lamp
on the System Controller will blink when it receives an alarm
signal. An alarm list can be displayed to show information such as
date/time alarm was received, the device sending the alarm and
the alarm type.
ALARM SETTING
ALARM IN
POLARITY
MOTION
DURATION
ALARM OUT
POLARITY
ALARM TIME
LINE OUT

NO
OFF
5S
OFF
NO
5S
OFF

Use the cursor button (j or l) to move the cursor to LINE
OUT, then use the cursor button (d or c) to select the
“ON” or “ OFF”.
Available settings:
• ON: Outputs alarm signal to the System Controller
• OFF: Does not output alarm signal to the System Controller

☞ To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.

L5AA2/XE GB 2002, 4, 25

MENU FLOW
CAMERA ID SETTING

LANGUAGE
LANGUAGE
LANGUE
SPRACHE

(V SYNC PHASE)
ú------+------ü

????????????????

English

POSITION
MENU

L-L SETTING

ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-‚

ENGLISH
FRENCH
GERMANY

SET

‚

BACK

PRIVACY MASK SETTING

MAIN MENU
LANGUAGE
CAMERA ID
SYNC
PRIVACY MASK
LENS
MIRROR
VIEW SETTING
OPTION
PRESET
MENU

SET
OFF
INT
SET
SET
OFF
1
SET
OFF
END

‚

PASSWORD LOCK
PASSWORD CHANGE
MASK SET

PASSWORD

ON ‚
SET ‚
SET ‚

(NEW PASSWORD)
1234
OK

‚
‚

SET ‚

****
-

SET ‚

‚
‚
MENU

PASSWORD

BACK

(NOW PASSWORD)
****
-

MASK 3 SET

SET ‚

(POSITION)

OPTION
CONTROL
ADDRESS
ALARM

485
0
SET

MASK NO.SELECT

‚
‚

MASK
MASK
MASK
MASK

1
2
3
4

OFF
OFF
OFF
OFF

SET

‚

RS-485 SETTING
BAUD RATE

19200

TERMINATE

OFF

LENS

AREA SETTING

FOCUS SETTING

FOCUS

AUTO ‚

ZOOM

SET

‚

LIMIT NEAR
SENSITIVITY
AREA

1M
HIGH
SET ‚

AREA

PRESET
MENU

OFF
BACK

MANU
ALARM SETTING
ALARM IN
POLARITY
MOTION
DURATION
ALARM OUT
POLARITY
ALARM TIME
LINE OUT

VIEW SETTING 1
NO
OFF
5S
ON
NO
5S
OFF

IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

AUTO
ATW
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

ZOOM SETTING
‚
‚
‚
‚
‚
‚

SPEED
EL ZOOM
V-RESO.UP

3
OFF
OFF

A See page 52

FOCUS SETTING
LIMIT NEAR
SPEED

1M
2

L5AA2/XE GB 2002, 4, 25

MENU FLOW
A
IRIS SETTING

AUTO
ATW
LONG
OFF
ON
ON
ON

PRESET
MENU

OFF
BACK

‚
‚
‚

BLC
SENSE UP

BLC SETTING

OFF
OFF

(LEVEL)
‚
‚

í------ú------ü

BLC SETTING

(BLC WEIGHT)
í------ú------ü

(BRIGHT)
í------ú------ü

BLC MASKING

(POSITION)

English

VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
AGC
GAMMA

40
CONTINUE (ñ)

IRIS SETTING
EI

OFF
(IRIS STOP)
í------ú------ü

(LEVEL)
í------ú------ü

BLC SETTING

GAIN SETTING

ATW SETTING

BLC WINDOW WEIGHTING

(SIZE)

AWC SETTING

MAX GAIN

±0·

MASKING

OFF

AWC LOCK

SET

DNR

OFF

SMART ATW

OFF

GO TO MWB

SET

TOP
BOTTOM
LEFT
RIGHT
CENTER(FIX)

0
0
0
0
7

PRESET
MENU

OFF
BACK

MWB SETTING
(OFFSET)
‚

R í---ú--+------ü

B í---ú--+------ü

OFF
GAIN SETTING
ES SETTING
SHUTTER SPEED
ú------+------ü

ES SETTING
50

SHUTTER SPEED

0·

MOTION SETTING
SIZE
MASKING
SENSITIVITY
ZOOM
INTERVAL
ALARM SIGN

SET
ON
SET
OFF
5S
OFF

MOTION SIZE
‚
‚
‚

V
H

PRESET
MENU

SENSITIVITY

MOTION MASKING

MOVE
Y-LEVEL
Y-DIFFER
DURATION

1
1

OFF
BACK

í---ú----ü
í---ú----ü
í---ú----ü
ú--------ü

DEMO

OFF

PRESET
MENU

OFF
BACK

5
5
5
1

CONTINUE (ñ)

APERTURE SETTING
H í------ú------ü

V í------ú------ü

L5AA2/XE GB 2002, 4, 25

SPECIFICATIONS

English

Pickup device
Effective pixels
Horizontal resolution
Lens

:
:
:
:

Electronic zoom

Autofocus

:
Iris control
Synchronization method :
Lowest image illumination :

1/4"
752 (H) x 582 (V)
Over 520 TV lines
22 power zoom lens, f=4.0 – 8.8mm (F1.6 –
3.8)
Electronic zoom and gearing
Zoom speed setting possible
16 power (combined with optic zoom gives
352 power max)
Max zoom magnification setting possible
Vertical resolution ON/OFF setting
AUTO/MANUAL
AF area setting possible (3 step)
AUTO/MANUAL, 1/2 EV steps
Internal synchronization/Line lock,
V phase adjustment possible
2.0 lx (F1.6) at max AGC gain
0.06 lx (F1.6) at x32 electronic sensitivity
boost
Over 48dB
Multi-spot evaluative metering
5 spot centerweighted average metering
48 multi-spot metering
• Fast shutter speed mode (SHORT);
1/50, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
• Slow shutter speed mode (LONG);
x1, x2, x4, x8, x16, x32

S/N
Backlight compensation

:
:

Electronic shutter

Electronic sensitivity
boosting

: AUTO/OFF, works with auto iris

White balance
AGC gain

: ATW/AWC/MWB
: ON allows selection of ±0dB, +6dB, +9dB, –6dB

Up to x32 max setting possible

OFF allows manual adjustment from 0dB to
30dB

Motion detector

Privacy masking
Alarm input/output
(back panel control
terminals)

: ON/OFF, ON allows setting of detection
patterns on a 48 zone screen for 6 motion
settings (size, masking, sensitivity, zoom,
interval, alarm sign)
: ON/OFF, max of 4 masked locations
Password lock possible

: Alarm input: 1 (for external alarm switch)

Mirror image effect

Camera ID
View settings

:
:

Communications
Operational
temperature/humidity
Power source
Power consumption
Weight

Alarm output: 1 (for sending a signal to the
system controller or an alarm detection
device such as a buzzer)
Horizontally (H), vertically (V), horizontally
and vertically (HV)
ON/OFF, 16 characters
9 (0 – 8) screen files can be established, and
each file can set 7 capturing characteristics
such as iris
Coaxial control, RS-485

:
:
:
:

–10 – 50° C/below 90% RH
24 V AC, 50 Hz/12 V DC
4.5 W
380 g

L5AA2/XE GB 2002, 4, 25

SPECIFICATIONS
Dimensions
54 mm

124.3 mm
115 mm

9.3 mm

10.9 mm

62 mm

English

5.5 mm

1/4"-20UNC

External appearance and specifications subject to change
without notice.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 55
Page Layout                     : SinglePage
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d6940c88-9bb8-4fa6-9f13-1552deaebdb4
Producer                        : Acrobat Distiller 4.05 for Windows
Create Date                     : 2002:04:25 11:36:32Z
Modify Date                     : 2004:06:25 12:58:16+01:00
Metadata Date                   : 2004:06:25 12:58:16+01:00
Creator Tool                    : ADOBEPS4.DRV Version 4.31
Document ID                     : uuid:faec7a05-b7da-4b89-93c6-0f1db2aa0e71
Format                          : application/pdf
Creator                         : 
Title                           : 
Author                          :

EXIF Metadata provided by EXIF.tools

Sanyo Vcc Zm300P Users Manual

vcc-zm300p to the manual fda8326c-5327-49cf-a29e-34d60f3d8183

Navigation menu

Versions of this User Manual:

Views

Navigation