Sanyo Vpc S500 Instruction Manual SYDC 5360_EN_Contents

2015-08-20

• INTRODUCTION
  • Package Contents
• GETTING TO KNOW YOUR CAMERA
  • Front View
  • Rear View
  • LCD Monitor Information
    • 2. Flash mode
    • 3. Capture mode
    • 4. Focus mode
    • 5. Possible number of shots
    • 6. Memory status
    • 7. Battery
    • 8. Recorded pixels
    • 9. Image quality
    • 10. White balance
    • 11. ISO sensitivity
    • 12. EV compensation
    • 13. Focus area
    • 14. Zoom bar
    • 2. Flash mode
    • 3. Recordable movie time available
    • 4. Memory status
    • 5. Battery power indicator
    • 6. Focus area
    • 7. Zoom bar
    • 2. Number of image
    • 3. Memory status
    • 4. Battery power indicator
    • 5. Index number of total number
    • 6. DPOF indicator
    • 7. Protect indicator
    • 8. Date
    • 9. Time
    • 10. Aperture
    • 11. Shutter speed
    • 12. EV compensation
    • 13. ISO sensitivity
    • 14. White balance
    • 15. Image quality
    • 16. Recorded pixels
    • 2. Movie mode
    • 3. Number of movie
    • 4. Memory status
    • 5. Battery power indicator
    • 6. Index number of total number
    • 7. Elapsed time
    • 8. Date
    • 9. Time
    • 10. Play/Pause indicator
• PREPARING THE CAMERA
  • Installing the Batteries
    • 2. Open the battery cover.
    • 3. Insert the batteries in the correct orientation as shown in the illustration.
    • 4. Close the battery cover.
  • Inserting and Removing an SD/SDHC Memory Card (Optional Accessory)
    • 2. Open the SD/SDHC memory card cover.
    • 3. Insert an SD/SDHC memory card in the correct orientation as shown in the illustration.
    • 4. Close the battery/SD/SDHC memory card cover.
  • Attaching the Camera Strap
  • LED Indicators and Self-timer Indicators
• GETTING STARTED
  • Turning the Power On/Off
  • Choosing the Screen Language
    • 2. [Set-up1] is displayed.
    • 3. Use the four-way controller (q) to select [Language], then press the button.
    • 4. Use the four-way controller (pq) to select the language you want.
    • 5. Press the button to confirm.
  • Setting the Date and Time
    • 2. [Set-up1] is displayed.
    • 3. Use the four-way controller (q) to select [Date & Time] and the four-way controller (tu) to switch the date types, then press the button.
    • 4. Press the four-way controller (tu) to select Day, Month, Year and Time fields.
    • 5. Press the button after all fields are set.
  • Formatting an SD/SDHC Memory Card or Internal Memory
    • 2. Use the four-way controller (q) to select [Format], then press the button.
    • 3. Use the four-way controller (pq) to select [Yes], then press the button to confirm.
  • Using the LCD Monitor
    • 2. Press the power switch to turn on the power.
    • 3. Compose your scene on the LCD monitor.
    • 4. Press the shutter release button.
• PHOTOGRAPHY MODE
  • Shooting Images
    • 2. Compose the image on the LCD monitor screen so that the main subject is within the focus frame.
    • 3. Press the shutter release button down halfway to focus the image.
    • 4. Press the shutter release button the rest of the way down to capture the image.
  • Mode Dial
    • 2.
    • 3.
    • 4.
    • 5.
    • 6.
    • 7.
    • 8.
  • Setting the Panorama Mode
    • 2. Shoot the first image.
    • 3. Orient the camera so that the second frame overlaps a small portion of the photographic subject of the first image and press the shutter button to capture the next image.
    • 4. Follow the same steps to capture subsequent images in the sequence.
    • 5. Finish the sequence by pressing the MENU button or rotate to another mode after the last image has been recorded.
  • Setting Image Resolution and Quality
    • 2. Press the MENU button.
    • 3. Use the four-way controller (q) to select [Image Size], then press the button.
    • 4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
    • 5. Follow the step 3 and 4 above to set the [Quality].
  • Using the Zoom Function
    • 2. Adjust the magnification ratio by using the / button.
    • 3. Compose your scene and press the shutter release button.
  • Using the Flash
    • 2. Press the power switch to turn on the power.
    • 3. Press the four-way controller (t/). The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (pq).
    • 4. Press the button to confirm the setting.
    • 5. Compose your scene and press the shutter release button.
  • Setting Focus
    • 2. Press the power switch to turn on the power.
    • 3. Press the four-way controller (u/). The focus mode changes each time the button is pressed. You can also change the setting using four-way controller (pq).
    • 4. Press the button to confirm the setting.
    • 5. Compose your scene and press the shutter release button.
• CAPTURE MODE
  • Burst
    • 2. Press the power switch to turn on the power.
    • 3. Press the four-way controller (p/) and use (p) to select [Burst]. You can also change the setting using four-way controller (tu).
    • 4. Press the button to confirm the setting. The indicator is displayed on the monitor screen.
    • 5. Press the shutter release button halfway to lock the focus.
    • 6. Press the shutter release button to capture a sequence of images.
  • Auto Bracket
    • 2. Press the power switch to turn on the power.
    • 3. Press the four-way controller (p/) and use (p) to select [AEB]. You can also change the setting using the four-way controller (tu).
    • 4. Press the button to confirm the setting. The indicator is displayed on the LCD monitor screen.
    • 5. Press the shutter release button to capture the three images.
  • Self-Timer
    • 2. Rotate the mode dial to , , , , , or .
    • 3. Press the power switch to turn on the power.
    • 4. Press the four-way controller (p/) and use (p) to select your desired self-timer mode. You can also change the setting using four-way controller (tu).
    • 5. Press the button to confirm the setting.
    • 6. Compose your scene and press the shutter release button.
  • Adjusting the Exposure (EV Compensation)
    • 2. Press the power switch to turn on the power.
    • 3. Press the four-way controller (q/) and use tu to set the range of EV compensation value from -2.0EV to +2.0EV.
    • 4. Press the button to confirm the setting.
  • Setting White Balance
    • 2. Press the power switch to turn on the power.
    • 3. Press the MENU button. [Mode1] is displayed.
    • 4. Use the four-way controller (q) to select [W. Balance], then press the button.
    • 5. Use the four-way controller (pq) to select the desired white balance setting, then press the button to confirm.
    • 6. To cancel the setting, press the MENU button and exit the menu.
    • 7. Press the shutter release button to capture the image.
• PLAYBACK MODE - THE BASICS
  • Viewing Images
    • 2. Press the button.
    • 3. Use the four-way controller (tu) to select the desired images.
  • Magnifying Images
    • 2. Adjust the zoom ratio by using the / button.
    • 3. To view different portions of the images, press the four-way controller (pqtu) to adjust the display area.
  • Thumbnail Display
    • 2. Press the button once.
    • 3. Use the four-way controller (pqtu) to move the cursor to select the image to be displayed at regular size.
    • 4. Press the or / button to display the selected image on full screen.
  • Slideshow Display
    • 2. Press the MENU button to access the Playback menu. Then use the four-way controller (q) to select [Slide Show] and press the button.
    • 3. Use the four-way controller (pq) to set the playback interval, then press the button.
  • Resizing an Image
    • 2. In the mode, use the four-way controller (tu) to select the desired images.
    • 3. Press the MENU button to access the Playback menu. Press the four-way controller (u) to select [Playback2] and press (q) to select [Resize] and press the button.
    • 4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
• MOVIE MODE
  • Recording Movie Clips
    • 2. Press the shutter release button to start recording.
    • 3. To stop recording, press the shutter release button again.
  • Playing Back Movie Clips
    • 2. Use the four-way controller (tu) to go through the images until the movie clip you want to play back is displayed.
    • 3. Press the button to start playing back the movie clips.
• PLAYBACK MODE - ADVANCED FEATURES
  • Deleting Images/Movie Clips
    • 2. Press the button.
    • 3. Use the four-way controller (tu) to select the image/movie clip you want to delete.
    • 4. Press the button to delete.
    • 5. Use the four-way controller (pq) to select [This Image] or [All Images] by your preference, then press the button.
    • 6. When the delete message appears, use the four-way controller (pq) to select [Yes], then press the button to confirm the deletion.
  • Protecting Images/Movie Clips
    • 2. In the mode, use the four-way controller (tu) to select the desired images.
    • 3. Press the MENU button, then use the four-way controller(q) to select [Protect] and press the button.
    • 4. Use the four-way controller (pq) to choose the desired setting, then press the button.
    • 5. Use the four-way controller (pq) to select [Lock], then press the button to confirm.
  • Setting the DPOF
    • 2. Press the MENU button. Use the four-way controller (pq) to select [DPOF], then press the button.
    • 3. Use the four-way controller (pq) to select by your preference, then press the button.
    • 4. Use the four-way controller (pq) to select by your preference, then press the button.
    • 5. Press the MENU button to return to the image playback mode.
• TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER
  • Connect the digital camera to your computer
    • 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode].
    • 3. Press the button.
    • 4. Use the four-way controller (q) to select [PC], then press the button.
    • 5. Turn off your camera.
    • 6. Connect your camera and the computer via the supplied USB cable.
    • 7. Turn your camera on by pressing the power switch.
    • 8. There will be a new “Removable Disk” icon detected in “My Computer”, which contains your recorded images or movie clips. (For Mac users, double-click [untitled] or [unlabeled] disk drive icon on our desktop.)
  • Download images or movie clips
• EDITING SOFTWARE INSTALLATION
  • Installing Photo Explorer
    • 2. When the welcome screen appears, click “Photo Explorer 8.0”. Follow the on-screen instructions to complete the installation.
  • Installing Photo Express
    • 2. When the welcome screen appears,click “Photo Express 5.0”. Follow the on-screen instructions to complete the installation.
  • Installing Cool 360
    • 2. When the welcome screen appears, click “Cool 360”. Follow the on-screen instructions to complete the installation.
• MENU OPTIONS
  • Camera Menu
    • 2. Press the MENU button, then use the four-way controller (tu) to select the [Mode1] / [Mode2] / [Mode3] menu.
    • 3. Use the four-way controller (pq) to select the option item, then press the button.
    • 4. Press the four-way controller (pq) to select the desired setting, then press the button.
  • Movie Menu
    • 2. Press the MENU button.
    • 3. Press the four-way controller (pq) to select the option item. Then press the button
    • 4. Press the four-way controller (pq) to select the desired setting, then press the button.
    • 5. To exit the movie menu, press the MENU button.
  • Playback Menu
    • 2. Press the MENU button, then use the four-way controller (pq) to select the [Playback1] / [Playback2] menu.
    • 3. Use the four-way controller (pq) to select the option item, then press the button.
    • 4. Press the four-way controller (pq) to select the desired setting, then press the button.
    • 5. To exit the playback menu, press the MENU button.
  • Setup Menu
    • 2. Press the four-way controller (tu) to select the [Set-up1] / [Set-up2] / [Set-up3] menu.
    • 3. Use the four-way controller (pq) to select the desired option item, then press the button.
    • 4. To exit the setup menu, rotate the mode dial to another mode.
• SPECIFICATIONS
• TROUBLESHOOTING GUIDE
• POSSIBLE NUMBER OF RECORDABLE IMAGES
• CONNECTING TO A PICTBRIDGE-COMPATIBLE PRINTER
  • 2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode]. Press the button.
  • 3. Use the four-way controller (pq) to select [PictBridge], then press the button.
  • 4. Connect your camera and the printer via a supplied USB cable.
• SYDC-5360_EN_Preface.pdf
  • (1) This device may not cause harmful interference, and
  • (2) This device must accept any interference received, including interference that may cause undesired operation.