Sargent Installation Instructions For 281 Door Closers With O10/H10/SSO Arms A7921C

User Manual: Sargent Installation Instructions For 281 Door Closers With O10/H10/SSO Arms Instruction Sheets

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadSargent Installation Instructions For 281 Door Closers With O10/H10/SSO Arms A7921C
Open PDF In BrowserView PDF
281 DOOR CLOSERS WITH O10, H10 & SSO ARMS
INSTALLATION INSTRUCTIONS
281 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE.
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477.

PULL SIDE

PULL SIDE

PUSH SIDE

PUSH SIDE

LEFT HAND DOOR
RIGHT HAND DOOR
CLOSERS ARE NON-HANDED

A
DRILL AND TAP DOOR
AND FRAME FOR #1224 MACHINE SCREWS.
RIGHT HAND SHOWN,
LEFT HAND OPPOSITE.
*NOTE: FOR MAXIMUM
POWER, INSTALL FOR
110° OPENING

B

INSTALL MOUNTING BRACKET WITH ARROW POINTING UP FOR BOTH RH & LH DOORS. MOUNT CLOSER WITH SPRING
ADJUSTING SCREW AWAY FROM HINGE. SEE PAGE 2 FOR THRU BOLT INFO.

C

ATTACH ARM TO FACE OF FRAME.

FOR H10 ARM ONLY

C1

ALTERNATE: PREASSEMBLE ARM PRIOR TO
ATTACHING TO STOP.

Copyright © 2012, 2014, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without
the express written permission of Sargent Manufacturing Company is prohibited.

RIGHT HAND SHOWN

A7921C

1

D

A. A
 TTACH ARM WITH INDEX MARK ON SPINDLE
ALIGNED AS SHOWN BELOW
B. SECURE WITH SCREW AND WASHER.

D1

ALTERNATE METHOD FOR ATTACHING
PREASSEMBLED ARM

CLOSER VALVES

E

A. INSTALL PIVOT AS SHOWN
B. USE SCREW TO SECURE PIVOT AND ARMS AS SHOWN

IF NOT PROPERLY INDEXED, DOOR
!! * WARNING:
!!
CLOSER WILL NOT FUNCTION PROPERLY.

ACCESSORIES
OPTIONAL: USE MORTISE NUTS (#4TB)
WHEN THRU-BOLTING IS REQUIRED

2

Copyright © 2012, 2014, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without
the express written permission of Sargent Manufacturing Company is prohibited.

A7921C

281 DROP PLATE USED WITH NARROW TOP RAILS.

FINAL ADJUSTMENT AND REGULATING PROCEDURES

F

·	Adjust Door speed, and Latching speed valves to
achieve the desired closing time. Recommend 6
seconds minimum from 90° to the closed position.
·	If Backcheck is required, adjust valve to achieve a
slight cushioning effect. Auxiliary stop required

USE 1/8" HEX WRENCH
TO ADJUST VALVES

·	If closer is equipped with Delayed Action, regulate
valve to achieve the desired delay.

DELAYED ACTION
RANGE
CLOSING SPEED
RANGE
BACKCHECK
RANGE
LATCHING SPEED
RANGE

G

Adjust Closing power to the minimum required to reliably
close and latch door

+

· If door is hard to open, decrease power slightly

INCREASE
POWER

· If door does not latch, increase power as required
· Use the chart below as a starting point
Doors adjusted with high closing power to overcome strong
draft conditions may exceed ADA standards

DECREASE
POWER

ADJUST CLOSING
POWER WITH A 1/4"
HEX WRENCH

SPRING POWER ADJUSTMENT GUIDELINES

H

-

DOOR WIDTH
(INCHES)

EXTERIOR DOORS

*INTERIOR DOORS

24-30

Turn screw 2-7

Turn screw 1-5

30-36

Turn screw 7-11

Turn screw 3-6

36-42

Turn screw 11-15

FACTORY SET

42-48

Turn screw 15-17

Turn screw 8 & up

INSTALL COVER WITH TWO SCREWS AS SHOWN.
SSP INCLUDES HANDED METAL COVER
(NOT SHOWN) AND 6 LOBE SECURITY SCREWS.

Copyright © 2012, 2014, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.

A7921C

3

3

MAX. DOOR
OPENING
4 1/2"

7 1/2"

DIM. A

11 1/8"

15-1/2"

DIM. B

MOUNTING POSITIONS

110

12"

10 3/8"

281 MOUNTING PLATE

DIM. "B"

160

CL

DIM "A"

1"

281 COVER

NOTES

A 281-J PLATE MAY BE USED WHEN COVER IS VISIBLE THROUGH GLASS

2 1/2"

#12-24 x 5/8" FLAT HEAD
MACHINE SCREWS OR #12 X
1 1/2" SCREWS PROVIDED

7/8"

#12-24 x 3/4" PAN HEAD
MACHINE SCREWS OR #12 X
1 1/2" SCREWS PROVIDED

1 1/4"

13/16"

DOOR WILL OPEN TO 180° IF CLOSER COVER DOES NOT INTERFERE WITH ADJACENT WALL

RIGHT HAND DOOR SHOWN, LEFT HAND OPPOSITE

12 GAUGE MINIMUM REINFORCEMENT REQUIRED ON METAL DOORS AND FRAMES.

OF HINGE

1.
2.
3.
4.

B

REVISED TABLE DIMENSION "B", 15" WAS 14"

ORIGINAL RELEASE PER PCP07-0047

1
DOOR
REINFORCEMENT

2 7/8" MIN RAIL
4 5/8"

8/10/06

2-8-07

2-7-07

A7956 B

-

10/25/13

100 Sargent Drive New Haven, CT 06511

SARGENT Manufacturing Company

281 O10/H10 TEMPLATE

DOOR CLOSERS

TITLE:

ART.

4

FACE OF DOOR
1
FRAME REINFORCEMENT

A

1/4" MAX REVEAL
FACE OF FRAME

COVER

2 3/16"

Manufacturing Company

RELEASE DATE

100 Sargent Drive New Haven, CT 06511

2-6-07

TEMPLATE NO .

BGS

DRAWN BY/DATE

GPF

CHECKED BY/DATE

ST

MFG ENG/DATE

DE

FNL APPROVAL/DATE

A7921C

GLASS

281 SERIES DOOR CLOSER WITH O10
OR H10 HEAVY DUTY STANDARD ARM

INTERPRET DRAWING
PER ANSI Y14.5M -1994
UNLESS OTHERWISE SPECIFIED
ALL DIMENSION ARE IN INCHES.
.XX .01
TOLERANCE
.XXX .005
1
1/64
ANGLE
FRACTION

Copyright © 2012, 2014, Sargent Manufacturing Company, an ASSA ABLOY
Group company. All rights reserved. Reproduction in whole or in part without
the express written permission of Sargent Manufacturing Company is prohibited.

4

MAT'L
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.5-c014 79.151481, 2013/03/13-12:09:15
Instance ID                     : uuid:4a14c16b-da4d-354c-a094-1996f7405348
Original Document ID            : adobe:docid:indd:d452531e-0594-11e2-a40f-ddb109bae097
Document ID                     : xmp.id:1e534791-7c79-4984-92b0-35022fca391c
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:01:29 09:30:42-05:00
Derived From Instance ID        : xmp.iid:3ff94c8b-f26f-4b98-857c-62c02894d4a9
Derived From Document ID        : adobe:docid:indd:d452531e-0594-11e2-a40f-ddb109bae097
Derived From Original Document ID: adobe:docid:indd:d452531e-0594-11e2-a40f-ddb109bae097
Derived From Rendition Class    : default
Create Date                     : 2014:01:29 09:30:42-05:00
Modify Date                     : 2014:01:29 09:30:48-05:00
Metadata Date                   : 2014:01:29 09:30:48-05:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CC (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu