Saris Cycling Group RFID1 The Hub User Manual 1000 The Hub

Download:
Mirror Download [FCC.gov]
Document ID	1746573
Application ID	d0kkYbqsSmfJBaipJAs3Mg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	254.66kB (3183266 bits)
Date Submitted	2012-07-18 00:00:00
Date Available	2012-07-19 00:00:00
Creation Date	2012-07-11 14:41:09
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2012-07-18 09:31:39
Document Title	1000_The_Hub.pdf
Document Creator	Adobe Acrobat 8.0
Document Author:	ewatson

2.1 CONNECT
Service 1
The Hub
Designed in Madison, WI
Made in the USA
Saris Cycling Group, Inc.
Model #: NFC RFID1
FCC ID: T8P-RFID1
IC: 6459A-RFID1
Power Outlet
Service 2
Ethernet Port
Booting
Mode
Operational
Mode
THE
HUB
THE
HUB
Plug data cable in to bottom of box and connect
to hard-wired Ethernet connection. Use a shielded
Ethernet cable. Plug cord in to bottom of box,
and connect to electrical box. Add the supplied
ferrite clamps to the end of the network cable.
The clamp must be 3-4” from the box. A successful
install of the box will result in the lights on the top
of the box flashing as it boots. System boot takes
approximately 45 seconds. At the conclusion of
the system boot, the green power light will
remain on and no other lights will be illuminated.
3.1 SET YOUR STATIC IP ADDRESS
For best performance, you should set a static IP address on the scanner.
Alternatively, you can add the MAC address of the scanner to any firewall or
network filtering system you have. By default, The Hub will connect to your
Network with DHCP.
1. Log in to http://thehub.saris.com
2. On the left-side of the page, under your organization, click the Flag Icon(s)
3. Select a device
4. Click Network Configuration
5. Enter the static IP address configuration
6. Click Next >>
7. Click the download link. Save the file to a flash drive
8. Unplug the power from The Hub
9. Insert the flash drive into the Service 2 Port on the bottom of The Hub
10. Re-connect the power to The Hub
11. Wait 1-2 minutes for the hub to boot and acquire the network
3.2 REGISTER YOUR DEVICE
1. Scan a tag on the device at least once.
2. Verify that the Network light turns off and the green light flashes twice.
COMPANY NAME
PRODUCT WARRANTY
Saris Cycling Group warrants your product to be free of any defects in material or workmanship for 1 year. This warranty does not apply to parts that have been worn out through normal use or damaged through misuse,
abuse, neglect, accident, or unauthorized modification. Where applicable, incidental and consequential damages are not covered, and there are no other warranties, expressed or implied. This warranty applies to the original
owner only. Retain your receipt as proof of purchase.
Repair or replacement of a defective Saris product or refund of the purchase price, shall be the sole remedy of the buyer under this warranty, and in no event shall Saris Cycling Group be liable for incidental or consequential
damages, losses or expenses. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
EQUIPMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the
following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is
corrected. Consult the dealer or experience radio / TV technician for help
FCC STATEMENT
FCC ID: T8P-RFID1
MADE IN USA
This device complies with part 15 of FCC Rules. Operation is subjected to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or TB inference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
CANADA STATEMENT
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference
to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This Class B digitial apparatus
complies with Canadian ICES-003.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but
de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communication satisfaisante. Cet appareil numérique de la classe B est conforme à la norme NMB-oo3 du Canada.
COPYRIGHT, TRADEMARKS, MODIFICATIONS
Copyright 2012. All rights reserved. No part of this publication may be copied, photographed, reproduced, translated, transmitted electronically or placed on digital media without the prior written consent of Saris Cycling
Group, Inc. Saris Cycling Group, Inc. , The Hub and The Hub logo, are all registered trademarks of Saris Cycling Group, Inc. All other product, brand, or trade names used in this manual may be trademarks or registered
trademarks of their respective owners. Saris Cycling Group, Inc. reserves the right to make improvements and/or updates to the products described herein at any time without notice.
Saris Cycling Group, Inc. 5253 Verona Road Madison WI 53711 Ph: 800.783.7257 Fx: 608.274.1702 www.saris.com
The Hub
SKU #H1000
THE
HUB
Assembly Instructions
Swipe card here
Brought to you by Saris Cycling Group
PARTS LIST
THE
HUB
Brought to you by Saris Cycling Group
Ride. Scan. Earn. Rewarding Active Transport.
a 1 Scanning Box
THE
HUB
INITIAL SOFTWARE SET UP
Swipe card here
Brought to you by Saris Cycling Group
THE
HUB
Brought to you by Saris Cycling Group
Ride. Scan. Earn. Rewarding Active Transport.
http://thehub.saris.com
b Double-Sided
-Sid Velcro Mounting
-Sided
ng Strips
c 1 Powerr Supply
Su
Prior to installing your Hub hardware, follow the link to
http://thehub.saris.com/TheHub/initialSetup.aspx
to register your organization and create your administrator log in and
profile.
LIGHT DEFINITIONS
d 150 Scanning Cards
THE
HUB
POWER – Green indicates power is successfully running to the box
Brought to you by Saris Cycling Group
Ride. Scan. Earn. Rewarding Active Transport.
Ride
. Scan
. Earn
Rid
Powered by:
. Rew
ardin
g Activ
e Tran
e. Sca
n. Ear
spor
n. Rew
ard
ing
THE
HUB
Brought
to you
t.
by Saris
Cycling
Group
Powe
Act
red by:
ive
Tra
nsp
Pow
ered
ort
THE
HU
Brought
to you
by
Saris
Cycling
Group
by:
e 1 Ferrite Clamp
NETWORK CONNECTION– Amber light pulses during set up. If light is on, no network connection
was made.
ATTENTION – Red light; if flashing, no connection with card reader.
SCAN INDICATION – Green light. Pulses 2x to indicate successful scan of card
SWIPE CARD HERE- Indicates location of card swipe. Aim card for this target for successful scan
FRONT OF BOX
HARDWARE SET UP
1.1 MOUNTING
THE
HUB
Swipe card here
Brought to you by Saris Cycling Group
THE
HUB
Swipe card here
Brought to you by Saris Cycling Group
THE
HUB
Brought to you by Saris Cycling Group
Ride. Scan. Earn. Rewarding Active Transport.
THE
HUB
Brought to you by Saris Cycling Group
4’
Ride. Scan. Earn. Rewarding Active Transport.
Power
Ethernet
BOTTOM OF BOX
Service 1
The Hub
Designed in Madison, WI
Made in the USA
Saris Cycling Group, Inc.
Model #: NFC RFID1
FCC ID: T8P-RFID1
IC: 6459A-RFID1
Service 2
POWER CORD OUTLET
ETHERNET CORD OUTLET
NETWORK CONFIGURATION ONLY
NETWORK CONFIGURATION ONLY
It is recommended that The Hub scanner box be located as close to your
bike parking as possible and mounted at shoulder height. The box requires
an indoor location with access to power (power cord supplied) and Ethernet (data cable NOT supplied) connections. Standard 110 volt is sufficient
for the system. The system will have adhesive strips to be attached to any
wall surface, and does not require any hardware drilled into the wall.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39
Create Date                     : 2012:07:11 14:41:09Z
Creator Tool                    : Adobe Acrobat 8.0
Modify Date                     : 2012:07:18 09:31:39-05:00
Metadata Date                   : 2012:07:18 09:31:39-05:00
Format                          : application/pdf
Creator                         : ewatson
Title                           : 1000_The_Hub.pdf
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:44256f2a-9ca2-42c8-b338-3e85c43eadfa
Instance ID                     : uuid:bc04b1c9-e1f6-4dc8-9b16-cc65895eb1e8
Page Count                      : 2
Author                          : ewatson

EXIF Metadata provided by EXIF.tools