Sato MB200I-B1 Bluetooth Transmitter User Manual REVISED Users Manual temporar
Sato Corporation Bluetooth Transmitter REVISED Users Manual temporar
Sato >
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 525125 |
| Application ID | UmY5ml8zES0SDqP1wIjERQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 34.16kB (427009 bits) |
| Date Submitted | 2005-03-18 00:00:00 |
| Date Available | 2005-05-02 00:00:00 |
| Creation Date | 2005-03-17 05:59:36 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2005-03-17 15:00:33 |
| Document Title | (REVISED)Users Manual (temporar.PDF |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | 02527 |
Barcode Printer Quick Guide 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 1234567890123456789012345678901 Introduction Table of Contents This manual is intended to help you become familiar with the basic operation of MB200i/MB201i the barcode printer in a short time. Please read this manual carefully to make full use of the functions of MB200i/MB201i. 1. Safety Precautions ....................................... 4 Markings and Symbols ............................ 4 Precautions in Use ................................ 13 2. Unpacking .................................................. 15 3. Parts Name ................................................ 16 Name and Function of Controls ................. 18 Preparation 4. Before Starting ........................................... 19 Charging the Battery Pack .................... 19 Installing and removing the Battery Pack . 23 Using AC Adapter .................................. 25 Setting Labels ........................................ 26 • Continuous mode ............................ 26 Operation 5. Test Printing ............................................... 28 6. Reference .................................................. 29 Options .................................................. 29 DIP Switch ............................................. 30 Basic Specifications of MB200i/MB201i . 32 Notes 1. 2. 3. Reproduction of all or part of this manual is prohibited without permission of the copyright owner. The information in this manual is subject to change without notice. If you find any ambiguous or erroneous information in this manual, please contact your nearest dealer or service center. Reference First Edition December 20, 2004 © 2004 Sato Corporation 1 Safety Precautions In this section, safety precautions about printer operation are explained to ensure proper care and usage. Make sure to read these carefully before using your printer. Markings and Symbols The following symbols or markings are used in this manual and on the printer so that you can properly use the printer, and to prevent any damage to property, harm or injury to yourself and others. Make sure to read their explanations carefully to familiarize yourself with their meanings. Warning This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. Caution This symbol indicates information that, if ignored or applied incorrectly, creates the possibility of personal injury or property damage. Symbol examples The triangle ( ) indicates something you should take absolute care with. The cautions are indicated concretely within the symbol. The symbol on the left indicates a risk of electric shock. A circle with a diagonal line ( ) indicates something you should not do. The symbol on the left indicates that you should not try to take the unit apart. A black circle with a picture inside ( )indicates something you need to do. The symbol on the left indicates that you should unplug the unit from the wall outlet. Safety Precautions 1. Safety Precautions Warning Liquid Safety Precautions Do not place any container with water or chemicals, such as flower vase or cup, as well as small metallic objects, near the printer. If any of these should fall into the printer, immediately turn off the power and contact your nearest dealer or service center. Continued use creates a damage of fire or electric shock. Abnormal Conditions Continued use of the printer while it is emitting smoke or strange odors creates the danger of fire or electric shock. Immediately turn off the power and contact your nearest dealer or service center. Do not try to service the printer by yourself. Disassembly Foreign Matter Do not drop or insert metallic or flammable objects into the openings on the printer (such as outlets for cables). If any of these should fall into the printer, immediately turn off the power and contact your nearest dealer or service center. Continued use creates a danger of fire or electric shock. Dropping and Damage Should the printer ever fall or otherwise become damaged, immediately turn off the power and contact your nearest dealer or service center. Continued use creates a danger of fire or electric shock. Never try to take the unit apart or modify it in any way. Doing so creates the danger of fire or electric shock. Contact your nearest dealer or service center for repair. Battery Pack • Never try to take apart the battery pack or modify it in any way such as with a solder iron. • Never expose the battery to direct flame, throw it into fire, or take any actions that may lead to shorting. • When charging the battery pack, make sure to use the printer or the specified battery charger. Safety Precautions Warning Caution AC Adapter/Battery Charger (Option) Safety Precautions • Use only the specified voltage. Using a different voltage may create the danger of fire or electric shock. • Use only the specified battery charger. Using a different battery charger may create the danger of fire or electric shock. • Never use the battery charger with any other battery pack except for the specified one. Doing so can rupture the battery, cause leakage, fire or electric shock. • Never cut, damage or modify the power cord. Also, never place heavy objects on the power cord or heat or pull the power cord. Doing so may damage the cord and create the danger or fire or electric shock. • Should the power cord ever become seriously damaged (internal wiring exposed or shorted), contact your nearest dealer or service center for repair. Continued use of such a cord creates the danger of fire or electric shock. • Never modify, excessively bend, twist, or pull the power cord. Doing so creates the danger of fire or electric shock. Location Do not locate the printer in the area subjected to high humidity or dew. If dew forms inside the printer, immediately turn off the printer and do not use it until it has been dried up. Continued use creates the danger of electric shock or the printer damage. Power Do not use wet hands to operate the power switch, replace the battery pack or unplug the AC adapter or battery charger. Doing so creates the danger of electric shock. Thermal Head and Stepping Motor • The thermal head gets very hot after printing. Take care when replacing paper or cleaning the printer just after printing to avoid burn. • Touching the end of the thermal head with bare hands may cause injury. Take care when replacing paper or cleaning the printer to avoid injury. • Do not try to replace the thermal head by yourself. Doing so creates the danger of injury, burn, or electric shock. Easy Cutter This part contains a blade. Take care to avoid cutting your hands. Safety Precautions Warning 1 Safety Precautions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modifications not expressly approved by the manufacturer for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. Warning This manual show that both the specification of Bluetooth and wireless LAN. Please refer to the corresponding section which shows specification of Bluetooth or wireless LAN. Wireless LAN specification. The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that same biological effects might occur, but such findings have not been confirmed by additional research. The (Wireless LAN Module (WM-B-AG-02)) has been tested and found to comply with the Federal Communications Commission (FCC) guidelines on radio frequency energy (RF) exposures. The maximum SAR levels tested for the (Wireless LAN Module (WM-B-AG-02))has been shown to be (0.449)W/kg at (Body). This device should not be colocated or operated with any other antenna transmitter. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 10 11 Safety Precautions Warning 1 Replacing the Battery Pack Safety Precautions • Use only the specified battery pack. • When replacing the battery pack, make sure to install the pack with the correct direction. Incorrectly replacing the battery create the danger of injury or damage to surrounding areas. • Replacing a small-size rechargeable battery (Lithium ion battery) Apply insulation treatment for the old battery pack by sealing the contact with tape or the like and ask our sales representative or service center for the measure to be taken for effective use of scarce resource. Do not place the battery pack together with other batteries such as dry batteries. Leaving the printer unused for a long time If you have no plan to use the print for a long time, remove the battery pack from the printer and unplug the AC adapter from the wall outlet. Precautions in Use Do not place the printer in a hot or cold place. The operation temperature range is -15°C to 50°C. Do not place the printer in an area with high humidity or at the temperature outside the specified range. Do not drop or give shock to the printer. The printer is given a protection against vibration possibly caused during normal transportation. However, do not apply extreme vibration or shock by dropping to the printer. Do not disassemble or modify the printer. The printer has high-precision components inside requiring fine adjustment. Do not disassemble the printer. Connect the specified cables to the external input terminals. Special cables are required to connect to the external equipment through the external input terminals. Contact your nearest dealer or service center if necessary. Use a specified option. Maintenance and Cleaning For safe maintenance or cleaning of the printer, make sure to remove the battery pack and the AC adapter from the printer. 12 Do not use a device not specified as option. Otherwise a fault may occur. Use the specified paper. Use the specified paper. Otherwise, broken head or faulty printing may occur. 13 Safety Precautions Caution 3. Parts Name Label ejection 58 50 40 30 Platen Parts Name Easy cutter Parts Name Open cover 30 40 50 58 Cover open/close lever Label width scale Label guide Dispenser unit Label guide adjust dial RS-232C cover LCD *1 Label guide adjust dial cover Battery cover Cover for DC input jack RS-232C connector PRINT key 1 2 3 4 Belt clip POWER key FEED key IrDA filter Battery indicator (LED) *2 DIP switch STATUS (LED) DC input jack *1 Operation panel with LCD is built in the wireless LAN interface model only (for manufacture option). For other option information, see "Reference" on page 29. *2 Operation panel with LCD for the wireless LAN interface model has CHARGE LED (for manufacture option) . 16 17 3 Parts Name RS-232C Interface: Connects to PC or handy terminal. Used for connecting to a computer. Signal:Low level -6.6 to +6.6 V High level -6.6 to +6.6 V RS-232C cover: Cover for RS232C connector. Open cover: Opened for setting labels. Cover Open/Close lever: Used to open or close the cover. Belt clip: Used when hanging the printer on your belt. * Do not hang the printer on to anything but a belt. Label guide: Set to meet the size of the label used. Label guide adjust dial: Adjusts the label guide to the width of the label used. Label guide adjust dial cover: Cover for label guide adjust dial. Easy cutter: Cuts printed labels. IrDA filter: Contains IrDA sensor and emitter. DIP switch: Sets the operation mode of the printer. (See page 30.) Dispenser unit: Moved to select Dispense mode. POWER key: Turns on/off the printer. Label ejection: Ejects the printed label. Label width scale: Indicates the width of label used. Cover for DC input jack: Cover for DC input terminal and DIP switch. Battery indicator (LED): Indicates the remaining amount of battery of the printer. 18 PRINT key: Sets the printer online or offline. STATUS (LED): Indicates the status of the printer. Charging the Battery Pack • Using the battery charger (option) to charge the battery pack Follow the steps below to charge the battery pack using the battery charger. • Use Battery pack Model No. PT/MB200-BAT • Use Battery charger (Battery pack Model No. PT/MB200BAT only) 1 Single-socket type: Model No. PT/MB200-CHG 2 Five-socket type: Model No. PT/MB200-CHG5 DC input jack: Connects to AC adapter. FEED key: Press to feed label. Battery cover: Cover for special battery pack. 4. Before Starting Plug one end of the power cord to the battery charger and the other to the wall outlet. (POWER lamp lights red.) Put the battery pack on the battery charger and then slide it in the direction of the arrow. Charging starts and the CHARGE lamp lights orange. When charging is 19 Before Starting Name and Function of Controls 4 CHARGE lamp may blink for a while. This does not indicate an error. You can continue charging. WER PO GE AR CH Before Starting 3 After charging, remove the battery pack from the charger. • The battery pack can be recharged by about 300 times (when used in normal temperature). If the battery is fully charged but runs out very soon, renew the battery pack. • Using the AC adapter (option) to charge the battery pack The battery pack can be charged while it is mounted in the printer. • Use AC adapter Slide the battery pack in the opposite direction of step (2) to remove the battery back. Charging Time It takes about 2.5 hours for the battery pack to reach full charge from a fully discharged state. Model No. PT/MB200-ADP (Sunfone Electronics Co., Ltd. Model No. ACML-06) Open the cover for DC input jack and insert the DC output terminal. AC adapter Notice • If the POWER lamp does not light at the start of charging, check the power cord connection. • If the CHARGE lamp does not light at the start of charging, make sure the battery pack is firmly mounted to the battery charger. Poor mounting of the battery pack may result in poor charging. • When the fully charged battery pack is placed on the battery charger, the CHARGE lamp goes on and then off. In case of five-socket charger, the CHARGE lamp lights green. Plug the AC adapter to the wall outlet. Charging starts and the battery indicator lights red. When charging is completed (fully charged), the battery indicator goes off. DC input jack DC output terminal • When charging a battery pack that has not been used for a long time, the 20 21 Before Starting completed (fully charged), the CHARGE lamp goes off. In case of five-socket charger, charging starts and the CHARGE lamp lights orange. When charging is completed (fully charged), the CHARGE lamp lights green. 4 Installing and removing the Battery Pack Open the battery cover. Before Starting Charging Time It takes about 5 hours for the battery pack to reach full charge from a fully discharged state. Terminals Insert the battery pack while pressing and holding the gray hook and close the battery cover. Insert the battery pack with the terminal side toward the printer. When removing the battery, press and hold the gray hook and then pull the tape. Hook Battery pack 22 23 Before Starting In the case of the LCD builtin wireless LAN interface model, CHARGE LED lights red when charging starts and is completed (fully charged), the CHARGE LED goes off. Using AC Adapter Follow the procedure below to use the printer with the AC adapter (option). Before Starting Before Starting * Make sure to turn the printer power off when removing or replacing the battery. When the printer is turned off, the STATUS LED goes off. Do not remove the battery while the STATUS LED is on. Remove the battery when the STATUS LED is off. * If you turning off the printer otherwise, the information stored in the printer may not be updated. Open the cover for DC input jack and insert the DC output terminal. AC adapter Plug the AC adapter to the wall outlet. DC input jack DC output terminal * Be sure to turn the printer power off when removing the DC output terminal of AC adapter or disconnecting the power source. If you turning off the printer otherwise, the information stored in the printer may not be updated. A battery pack is unnecessary when an AC adapter is used. If a battery pack and an AC adapter are being used at the same time, the printer starts charging (when a battery is not fully charged) or the battery indicator goes off (when a battery is fully charged). 24 25 4 The method of setting label may vary depending on the print mode. Before Starting Open the label guide adjust dial cover and turn the dial till the label guide fits with label roll. Label guide adjust dial Continuous mode Labels Journal Turn the label roll lightly by the hand and confirm that it rotates smoothly. 1 Slide the Cover Open/ If a drags is felt, paper may not be fed correctly. Return the dial for adjustment. When using the paper of the same width as that used previously, adjustment of the label guide is not necessary. Close lever in the direction of arrow to open the cover. If you are using the printer in Dispense mode, lifting the change lever, slide the dispenser unit until stops . 2 Place the label to the printer. Pay attention to the direction of the label roll. Close the cover after confirming that the leading edge of the label is outside the printer. Label leading edge This completes the label setting in continuous mode. 26 27 Before Starting Setting Labels 5. Test Printing Test Printing the FEED key, set the POWER key . The printer enters the test mode. Press the FEED key again to start test printing. 2 Verify the following Options 1 Pressing and holding Reference 6. Reference User Option POWE Battery Pack (Supplied with the printer) PRIN FEED Preparing a spare battery pack will insure uninterrupted operation due to Low Battery. 12 ab2c3456 defg 7 abc34567 using the output of the defg 12 abc34567 defg test printing. • There is no chipped character. • Print condition is good. In the test printing, the battery residual is indicted by ( for full charge). When the battery indicates , charge the battery. Model No. PT/MB200-BAT Battery Charger (Single-socket) Charges the battery pack. Model No. PT/MB200-CHG Battery Charger (Five-socket) Charges the battery pack (up to five packs). * If any fault is detected, contact the store you bought the printer, dealer, or service center. Use AC Adapter Model No. ACH400 Rated Input: AC100 to 240 V, 1.2A 50/60Hz Output: DC19 V, 3.2A 28 Model No. PT/MB200-CHG5 Rated Input: DC19 V, 3.2A Output: DC8.4 V, 1.1A 29 6 DIP Switch Setting Reference Used to supply power from domestic power supply. The DC output terminal of the AC adapter is connected to the Model No. PT/MB200-ADP printer. (Sunfone Electronics Co., Ltd. Model No. ACML-06) • • • • Be sure to use the specified AC adapter. Plug or unplug the AC adapter while holding its body. Pay attention not to injure the cord. Keep the AC adapter unplugged when not in use. DIP Switch Setting DIP switch 1 Turn the printer power off. 2 Open the DIP switch cover. 3 Change the position of 30 1 2 3 4 the switch you want to change using a pointed tool such as the tip of ball-point pen. DIP switch Key Starting mode Cover PRINT FEED Interface Description 3 4 OFF OFF OFFOFF Close OFF OFF RS-232C Normal print mode Close OFF ON User test print mode OFF OFF ON ON Close OFF OFF RS-232C HEX dump mode OFF OFF OFF ON Open ON OFF Auto peeling mode Open OFF ON Manual print mode User test print mode OFF ON OFFOFF Close OFF ON OFF ON OFF ON Open ON OFF Head check (print area) designation Open OFF ON Head check designation clear OFF ON ON ON Open ON OFF CRC check enable designation Open OFF ON CRC check disenable designation Normal print mode ON OFF OFFOFF Close OFF OFF IrDA interface Test print mode Close OFF ON ON OFF ON ON Close OFF OFF IrDA HEX dump mode interface ON OFF OFF ON Open ON OFF Head check (Barcode print area) designation Head check clear Open OFF ON ON ON ON ON Open ON OFF Online command designation (Petit lapin compatible) Online command Open OFF ON designation (SBPL command) 31 Reference AC Adapter 6 Reference Item Printing system Head density Maximum print area Print speed Dimensions Weight Power supply AC adapter Battery pack Paper Paper thickness Shape of paper Label size (Liner sheet and eye mark pitch) Label printing Self-diagnosis Power saving feature Interface • RS-232C • Photo coupling 32 Description Thermal printing system 8 dots/mm (203 dpi) 48 mm (width) x 160 mm (pitch) 103 mm/s max. (The speed varies depending on print duty and environment of use.) Printer: 119 mm (width) x 64 mm (depth) x 88 mm (height) (excluding belt clip) 390 g (Standard model, including battery pack) AC adapter or Battery pack Input: AC100 to 240 V, 1.5 A 50/60Hz Output: DC9 V, 5A Lithium-ion DC7.4 V, 2400 mAh Prints 1.5 rolls of thermal labels with full charge (equivalent of 48 m). Continuous printing is permitted (provided print duty is 16% or less.) Be sure to use specified paper. 0.064 to 0.190 mm Roll paper: Wound with surface out Maximum diameter: f58 mm Width: 25.4 to 55 mm (28.4 to 58 mm) Pitch: 13 to 160 mm (16 to 163 mm) Continuous, Dispense Head check/Cover open/Paper end/Battery check/Test print Enters Sleep mode after no operation for 5 minutes. Auto power off after no operation for 5 minutes. With Bluetooth or wireless LAN specifications, no auto power off is defaulted. Auto power off time can be changed by the printer operation register command.For details of command, refer to Programming Guide. Mini DIN IrDA communication (Complies with IrDA standard Ver. 1.2. Communication range: 15 to 20 cm max.) Item • Bluetooth • Wireless LAN Paper sensor Character magnification Rotation of character Character type Barcode 2-dimensional code Switch Indicator Application standards Protective feature Waterproof feature Environmental condition (including battery pack) Description Bluetooth Specification Ver. 1.1 Class 2 Wireless LAN interface (IEEE802.11b) TCP/IP (FTP, LPR, SOCKET) Reflection type (eye mark), Transmission type (gap) 1 to 6 times 0°, 90°, 180°, 270° SATO standard font: X20, X21, X22, X23, X24, OCR-A, OCR-B, POP character Kanji: 16 x 16, 22 x 22, 24 x 24 Square Gothic (JIS Level 1, Level 2) JAN8/13, UPC-E/UPC-A, NW-7, CODE39, CODE93, CODE128, INTERLEAVED2of5, Customer barcode, RSS-14 However, barcode shall be used with the following. Parallel barcode: Thin bar width of 2 dots or more Serial barcode: Thin bar width of 3 dots or more Any one of PDF417, QR code (including micro QR), Data matrix code (ECC200), MAXI code, Composite symbol can be used by downloading. POWER key, PRINT key, FEED key STATUS LED: One (Lights in three color: Green, Red and Orange) Battery LED: Three FCC 15 ClassB, EN55022, EN55024, EN610003-2, EN61000-3-3, UL60950-1, CSA C22.2 No.60950, GB9243, GB9254, GB17625.1, EN60950 Overcharge protection Head overheat protection Detection of Low Battery. Rainproof type (JIS protection class 3), Shoulder rainproof cover (option) installed. * Removed when communication cable is connected. Operating ambient temperature: -15 to 50°C Humidity: 20 to 80% without condensation Storage ambient temperature: -25 to 60°C Humidity: 20 to 80% without condensation Environment for paper is excepted. 33 Reference Basic Specifications of MB200i/MB201i Item Options Reference 34 Description Battery pack, AC adapter, Battery charger (Singlesocket), Battery charger (5-socket), Rainproof case, Shoulder belt, Belt hook (one-touch type), Waist case, RS-232C cable Additional Page User Option 1. RS 232C Cable (for MODEL MB200i,MB201i) 2. Ferrite Core (for RS232C Cable) Type : RFC-8 KITAGAWA Ind 2pcs 3. Ferrite Core (for AC Adapter) 1pcs Type : ZCAT2035-0930A TDK CORP. How to attach a ferrite core When using AC adapter and RS232C cable, it closes like a photograph. AC adapter Cable is rolled 2 time and inserted. 50mm RS232C cable Cable is rolled 1 time and inserted. (Two places) 50mm 㧖 Please be sure to attach a ferrite core by prevention of electromagnetic wave disturbance. be used 㧖 AC adapter and RS232C cable should should use the specification article of our company.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2005:03:17 05:59:36Z Modify Date : 2005:03:17 15:00:33+09:00 Page Count : 20 Creation Date : 2005:03:17 05:59:36Z Mod Date : 2005:03:17 15:00:33+09:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : 02527 Metadata Date : 2005:03:17 15:00:33+09:00 Creator : 02527 Title : (REVISED)Users Manual (temporar.PDFEXIF Metadata provided by EXIF.tools