Savant Technologies GE Lighting a Savant CBYGEH001 C-Reach User Manual PowerPoint Presentation

GE Lighting C-Reach PowerPoint Presentation

Contents

CBYGEH001-E-user manual

Log ID: 100001_1
Log ID: 100002_4
Log ID: 100003_3
Update grammar to the following Select the WiFi Network you want to connect to Log ID: 100013_1
Update grammar to the following Your reach device has successfully connected. You need to add the device to an existing place or create a new place to continue. Note: When adding to an existing place, please ensure ALL other devices associated with this place are powered ON and within range. Failure to do so will result in loss of previously saved settings. (i.e. lost schedule, bulb color, etc.) Add to Existing Place iOS & Anroid Log ID: 100012_2
reach device support Log ID: 100026_2
reach Device Support 1) Navigate to the Home tab and click on 2) Click “Add New Bulb(s)” OR 1) Make sure the reach device is paired to the correct network 2) Press and release the button on the side of the reach device 3) Once you see the LAN LED flashing, the hub has started adding devices 4) Please wait a few moments while devices are added Log ID: 100029_1
Log ID: 100030_3
LED Operation Action Power power on/initialization slow flash config/reset fast flash LAN connecting to router slow flash connection fail fast flash connection success steady on scanning devices quick flash WAN connection fail steady off connection success steady on Action Description slow flash 0.5 Hz quick flash 1.5 Hz fast flash 5.0 Hz reach Device Support Log ID: 100031_1
1. Unplug the reach device from the wall outlet 2. While holding the button on the reach device, plug it back into the wall and continue holding the button for at least 3 seconds 3. Note: All 3 LEDs will start flashing once reach device has been reset reach Device Support Log ID: 100032_1

Navigation menu