Savant Technologies GE Lighting a Savant R30-CLFE LED LAMP User Manual

GE Lighting LED LAMP Users Manual

Users Manual

6BC-BR800SS-A1Z120VTunable white100%5%~100%2400-5000K5000KFactory Default NonePair Successfully Flash 3 timesModify Device Name NoneChoose light to group None加组完成 Flash 3 timesModify Group Name 无Kick off device out of groupFlash 3 timesChoose light to scene Flash 3 timesAdd to scene successfully NoneModify Scene NoneKick off device out of sceneNoneOTA Flash 3 timesKick off device by gatewayFlash 3 timesReset Flash 3 timesYes5sYesYes1/3/5/15/30s1/3/5/15minBLE Mesh816YesGE HUBUL+FCCMemory Function DurationModelVoltageBrightness rangeInitial brightnessCCT rangeInitial CCTPairPhenomenonBR30 User ManualGateway TypeCertificationFunctionOff-networkGroup quantityScene quantityOTAFunctionFTSSmart Control (Scheduling)Smart Control DurationNetwork ArchitectureMemory Function
1. Factory new: bulb with certain mesh name and password, concretecontent depend on customer.2. Log in at first time: user use the default mesh name and password tolog in and modify the mesh name and password by self, light will flash 3times after modifying successfully. The device which use same meshname and password should under same network.3. Reset device: if user forget the mesh name and password they set, theycould rest the device through on/off 5 times the device. Concreteoperations as follow: power on and off the device 5 times, former 3 timesinterval time less than 3s, last 2 times on/off operation interval timebetween from 3 to 30s. After above operation light will flash 3 timeswhich means match successfully.4. Control function: the light has function of on/off, lumen control andgroup control.For additional help, regulatory and safety Information, please go to:Federal Communications Commission (FCC) Interference StatementThis device complies with part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.Note: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.RF exposure warningThis equipment must be installed and operated in accordance withprovided instructions and the antenna(s) used for this transmitter mustbe installed to provide a separation distance of at least 20 cm from allWarnng partRemark

Navigation menu