Savant Technologies GE Lighting a Savant R30-CLFE LED LAMP User Manual
GE Lighting LED LAMP Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3226256 |
| Application ID | guNo/1XtD0t1fG897t926g== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 2.67kB (33420 bits) |
| Date Submitted | 2016-12-13 00:00:00 |
| Date Available | 2016-12-13 00:00:00 |
| Creation Date | 2016-12-12 10:04:53 |
| Producing Software | Foxit Phantom Printer Version 3.0.3.0804 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | Users Manual |
BR30 User Manual Model 6BC-BR800SS-A1Z Voltage 120V Function Tunable white Initial brightness 100% Brightness range 5%~100% CCT range 2400-5000K Initial CCT 5000K Phenomenon Factory Default Pair None Pair Successfully Flash 3 times Modify Device Name None Choose light to group None 加组完成 Flash 3 times Modify Group Name Off-network 无 Kick off device out of group Flash 3 times Choose light to scene Flash 3 times Add to scene successfully None Modify Scene None Kick off device out of scene None OTA Flash 3 times Kick off device by gateway Flash 3 times Reset Flash 3 times Function Memory Function Yes Memory Function Duration 5s FTS Yes Smart Control (Scheduling) Yes Smart Control Duration Network Architecture 1/3/5/15/30s 1/3/5/15min BLE Mesh Group quantity Scene quantity 16 OTA Yes Gateway Type GE HUB Certification UL+FCC Remark 1. Factory new: bulb with certain mesh name and password, concrete content depend on customer. 2. Log in at first time: user use the default mesh name and password to log in and modify the mesh name and password by self, light will flash 3 times after modifying successfully. The device which use same mesh name and password should under same network. 3. Reset device: if user forget the mesh name and password they set, they could rest the device through on/off 5 times the device. Concrete operations as follow: power on and off the device 5 times, former 3 times interval time less than 3s, last 2 times on/off operation interval time between from 3 to 30s. After above operation light will flash 3 times which means match successfully. 4. Control function: the light has function of on/off, lumen control and group control. Warnng part For additional help, regulatory and safety Information, please go to: Federal Communications Commission (FCC) Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. Note: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 2 Author : Create Date : 2016:12:12 10:04:53+08:00 Creator : Producer : Foxit Phantom Printer Version 3.0.3.0804 Subject : Title :EXIF Metadata provided by EXIF.tools