Savant Technologies GE Lighting a Savant WIT100 Wireless Integrated Thread Sensor User Manual WIT100 Install Manual English 031918

Download:
Mirror Download [FCC.gov]
Document ID	3801215
Application ID	3cvCioUBMrS1wP0jrbRkAQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.61kB (157645 bits)
Date Submitted	2018-03-29 00:00:00
Date Available	2018-03-29 00:00:00
Creation Date	2018-03-29 15:59:29
Producing Software	Acrobat Distiller 10.1.16 (Windows)
Document Lastmod	2018-03-29 15:59:29
Document Title	WIT100 Install Manual English 031918.pdf
Document Creator	Adobe InDesign CC 13.1 (Windows)
Document Author:	xuji

Installation Guide
WIT100 Sensor
Wireless Integrated Thread Sensor
STOP
BEFORE YOU BEGIN
Read these instructions completely and
carefully.
WARNING
RISK OF ELECTRIC SHOCK
In case of Digital bus miswiring mains can present on
the device. Make sure all electricity switched of before
inspection.
• Turn power off before inspection, installation or removal
RISK OF FIRE
• Follow all relevant IEC or UL instructions and local building codes
IMPORTANT
To ensure the product warranty is valid, please ensure all installation instructions and environmental conditions for storage and operation are
complied with.
Only GE trained contractors can install the product.
FCC / IC COMPLIANCE STATEMENTS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada license exempt RSS standards. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
Cet appareil est conforme aux normes RSS exemptées de licence de Industrie Canada.
Son fonctionnement est soumis aux deux conditions suivantes:
• Cet appareil ne doit pas provoquer d'interférences et
• Cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
To satisfy FCC/ISED RF exposure requirements a separation distance of 20 cm or more must be maintained between the antenna of this device
and persons during operation. Operation at closer than 20cm is not permitted
Pour être conforme aux limites d’exposition aux ondes RF des normes FCC/ISED, une distance de séparation d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil et toute personne pendant son opération. Mettre en opération cet appareil a une distance plus rapprochée que 20 cm n’est pas permis.
Product overview
The Wireless Integrated Therad sensor (WIT100) is a small-size,
luminaire-integrated sensor with wireless communication, using
the cutting-edge Thread protocol. This is based on the 802.15.4
standard and guarantees a secure and reliable communication
between the luminaires in the room. Using the WIT100 sensor in
each luminaire provides a state-of-the-art distributed lighting
control based on the built-in motion sensing and daylight
harvesting functionalities. This sensed information is then shared
between all luminaires. The control of the luminaire is carried out
through the DALI 2.0 digital bus between the output of the sensor
and the control input of the luminaire’s LED driver. The DALI bus
also provides the necessary supply power for the sensor, no any
additional wiring and auxiliary power supply is required. This
and the wireless communication help minimizing the installation
costs. Besides the automatic operation of the system it is also
possible to adjust preferred dimming levels manually through
Current’s energy-harvesting wireless switches. These switches
do not require wires for communication, but they even use
the mechanical energy of pushing the button to generate the
necessary power for the electronics. The configuration of the
system is done in a very easy way using through Current’s
Bluetooth-based iOS application.
Techical data
Key functions
Dimensions
58,5 x D35mm (2,303xD1,378 inch) + connected cable
Weight
15g
Current consumption
Max 8mA (without digital communication) @ Max. 20V DC
Sensor type
Passsive infrared (PIR) sensor (for motion), light sensor
Operating Environment
0°C to 45°C / IP 20 – Indoor, dry location.
Status indicator
Network LED (amber): Network joined; Installation test
Connections
Cable connection to the Driver or Interface module.
Mounting
Easy screwless installation to a D22mm (0,866 inch) cut hole.
Recomented mounting height
3m
Warranty
5 years
Product Certifications
E486320
FCC ID: PUU-WIT100
IC ID: 10798A-PUUWIT100
Product availability
SKU
Description
Article No.
TBD
Wireless Integrated Thread Sensor
WIT100
Notes
Purpose of the Control
Operating Control
Method of Mounting Control
Independently Mounted Control for panel mounting
Type of action and additional features
Type 1
Control Pollution Degree
Software Class and Structure
Class A
Maximum Interconnection cables length
3m
Dimensions
Sensor pattern
Cable connection to driver
Connect the WIT100 Sensor Digital bus line with a TE770340 / TE350628 connector to the bellow drivers and interface module:
•
Connected Indoor Driver (CID): limited compatibility to allow proper operation of fixture (OFF, backround level dim and task level lighting)
•
Philips Sensor Ready driver (SR): compatibility desirable but not required
•
Leedarson 0-10V/DALI interface module: ON/OFF and dimming commands only (no Fault Reporting, no VLC, no Dimming Curve Change,
and OTA
no 1% diming, partial UL924)
Cable from Driver/Interface module
www.currentbyge.com
All trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values
when measured under laboratory conditions. Current, powered by GE is a business of the General Electric Company. © 2016 GE.
WIT100 Sensor Install Manual (GE2033-0758 / SAPXXXXXXXX)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : xuji
Create Date                     : 2018:03:29 15:59:29-04:00
Modify Date                     : 2018:03:29 15:59:29-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:03:19 13:27:28+01:00
Creator Tool                    : Adobe InDesign CC 13.1 (Windows)
Instance ID                     : uuid:3a4a594f-f90f-462f-96c2-9965120a7aab
Original Document ID            : xmp.did:b5348944-6c98-4849-82e8-67936dbbd839
Document ID                     : xmp.id:60ec3f86-6d74-954b-bdd1-278cdb0d8724
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0d06d7ff-8578-6d4e-af8e-ed07bd16f183
Derived From Document ID        : xmp.did:59974c32-4d4d-2641-8d7c-f66a3d6fb95a
Derived From Original Document ID: xmp.did:b5348944-6c98-4849-82e8-67936dbbd839
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Windows)
History Changed                 : /
History When                    : 2018:03:19 13:27:27+01:00
Format                          : application/pdf
Title                           : WIT100 Install Manual English 031918.pdf
Creator                         : xuji
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Trapped                         : False
Page Count                      : 3

EXIF Metadata provided by EXIF.tools