Savant Technologies GE Lighting a Savant WIZ100 WIZ100 SENSOR User Manual
GE Lighting WIZ100 SENSOR
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3944472 |
| Application ID | Xrm0UbaWGRpGa05NjNHXYQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 167.43kB (2092885 bits) |
| Date Submitted | 2018-07-31 00:00:00 |
| Date Available | 2018-07-31 00:00:00 |
| Creation Date | 2018-06-14 11:27:02 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-07-11 16:33:07 |
| Document Title | User Manual |
| Document Creator | Adobe Illustrator CC 2014 (Windows) |
展开尺寸：420*290mm Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help Installation Guide WIZ100 Sensor Wireless Integrated Zigbee Sensor STOP BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING RISK OF ELECTRIC SHOCK In case of Digital bus miswiring mains can present on the device. Make sure all electricity switched of before inspection. • Turn power off before inspection, installation or removal RISK OF FIRE • Follow all relevant IEC or UL instructions and local building codes IMPORTANT To ensure the product warranty is valid, please ensure all installation instructions and environmental conditions for storage and operation are complied with. Only GE trained contractors can install the product. FCC / IC COMPLIANCE STATEMENTS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme aux normes RSS exemptées de licence de Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: • Cet appareil ne doit pas provoquer d'interférences et • Cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. To satisfy FCC/ISED RF exposure requirements a separation distance of 20 cm or more must be maintained between the antenna of this device and persons during operation. Operation at closer than 20cm is not permitted Pour être conforme aux limites d’exposition aux ondes RF des normes FCC/ISED, une distance de séparation d’au moins 20 cm doit être maintenue entre l’antenne de cet appareil et toute personne pendant son opération. Mettre en opération cet appareil a une distance plus rapprochée que 20 cm n’est pas permis. The Wireless Integrated Zigbee sensor (WIZ100) is a small-size, luminaire-integrated sensor with wireless communication, using the zigbee protocol. This guarantees a secure and reliable communication between the luminaires in the room. Using the WIZ100 sensor in each luminaire provides a centralized lighting control based on the built-in motion sensing and daylight harvesting functionalities. This sensed information is uploaded to Daintree network. The control of the luminaire is carried out through the digital bus between the output of the sensor and the control input of the luminaire’s LED driver. The digital bus also provides the necessary supply power for the sensor, no any additional wiring and auxiliary power supply is required. This wireless communication help minimizing the installation costs. Besides the automatic operation of the system it is also possible to adjust preferred dimming levels through Current’s WAC. 3m 2.1m D31mm x H37.5mm(without antenna) 12.8g Max 8mA(without digital communication)@Max 22.5V class 2 WIZ100 max. 22.5V, class 2, capable of no greater than 15VA power Passive infrared(PIR) sensor(for motion) light sensor 0℃ to 50℃(Indoor) Network LED:Network joined Cable connection to interface module Easy screw installation to a D22mm hole 3m 5 years FCC ID: PUU-WIZ100 IC: 10798A-PUUWIZ100 95039263 Zigbee WIZ100 Connect sensor to GE Lighting Solutions L L C LED drivers or control modules not capable of providing greater than 15VA power, including but not Limited to models GED50MCC2P1000, GED36MCC2P700 and GED100MCC2P480 Major motion Minor motion 3m 2.1m
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c011 79.156289, 2014/03/31-23:39:12 Create Date : 2018:06:14 11:27:02+08:00 Metadata Date : 2018:07:11 16:33:07+08:00 Modify Date : 2018:07:11 16:33:07+08:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 172 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 17298 bytes, use -b option to extract) Instance ID : uuid:7f055413-c768-4208-8337-f5eb2c46e86c Original Document ID : xmp.did:b5348944-6c98-4849-82e8-67936dbbd839 Document ID : xmp.did:86f015bc-1ca7-8746-aaea-33ada0fc9619 Rendition Class : proof:pdf Derived From Instance ID : uuid:45395e60-04f9-462c-bee3-4430c830faed Derived From Document ID : xmp.id:e6d7855d-e6bf-9540-a070-60e9aa76c330 Derived From Original Document ID: xmp.did:b5348944-6c98-4849-82e8-67936dbbd839 Derived From Rendition Class : proof:pdf History Action : converted, saved History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / History When : 2018:04:09 15:06:19+02:00, 2018:06:14 11:27:02+08:00 History Instance ID : xmp.iid:86f015bc-1ca7-8746-aaea-33ada0fc9619 Manifest Link Form : EmbedByReference Manifest Reference File Path : C:\Users\guoxiaokun\Desktop\CR-sensor render\sensor.psd Ingredients File Path : C:\Users\guoxiaokun\Desktop\CR-sensor render\sensor.psd Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 502.758609 Max Page Size H : 686.927026 Max Page Size Unit : Millimeters Font Name : GEInspira, GEInspira-Bold, ArialMT, Arial-BoldMT, SegoeUI, AdobeSongStd-Light Font Family : GE Inspira, GE Inspira, Arial, Arial MT, Segoe UI, Adobe 宋体 Std Font Face : Regular, Bold, Regular, Bold, Regular, L Font Type : TrueType, TrueType, Open Type, Open Type, Open Type, Open Type Font Version : Version 3.00, Version 3.00, Version 5.01.2x, 001.001, Version 5.01, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False Font File Name : GE_Inspira_Regular.ttf, GE_Inspira_Bold.ttf, Arial_0.ttf, arial-bold.otf, segoeui_0.ttf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE Cool Gray 11 C, PANTONE 136 C Swatch Group Name : 默认色板组 Swatch Group Type : 0 Swatch Colorant Swatch Name : PANTONE 136 C, PANTONE Cool Gray 11 C Swatch Colorant Type : SPOT, SPOT Swatch Colorant Tint : 100.000000, 100.000000 Swatch Colorant Mode : CMYK, CMYK Swatch Colorant Cyan : 0.000000, 62.000000 Swatch Colorant Magenta : 28.999999, 50.999999 Swatch Colorant Yellow : 81.999999, 46.000001 Swatch Colorant Black : 0.000000, 40.000001 Page Count : 1 Creator : Adobe Illustrator(R) 17.0 For : ��С�j, Title : WIZ100_Install_Manual_English_说明书.pdf Bounding Box : -597 -891 595 915 Container Version : 11 Creator Version : 18EXIF Metadata provided by EXIF.tools