User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2269870 |
| Application ID | zJwdlE6xqojoU7784cvQ7A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 201.32kB (2516516 bits) |
| Date Submitted | 2014-05-16 00:00:00 |
| Date Available | 2014-06-26 00:00:00 |
| Creation Date | 2014-05-12 16:25:05 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2014-05-12 16:25:26 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
Instruction Manual G5 P Document 66062 Revision Language English Document type Document number Instruction Manual 66062 Rev Page 2 of 9 Document information Attribute Document Type Title Document No. Information Instruction Manual SCANRECO G5 Pocket 66062 Language Release date Original Release date (original) Author Company English 2014-02-07 English 2014-02-07 SCANRECO SCANRECO AB, SWEDEN All rights reserved Design, equipment, technical data and specifications are subject to change or improvement without prior notice. The text in this instruction manual, or any part of it may not be reproduced or transmitted in any form or by any means, including electronic, mechanical, photocopying, recording, storage in an information retrieval system, or otherwise, without prior written permission of SCANRECO AB, SWEDEN. Revision history Revision Date 2014-02-07 Note First release Document type Document number Instruction Manual 66062 Rev Page 3 of 9 G5 Pocket Transmitter Product description The G5 Pocket HCU is a light weight, impact and water resistant handheld unit equipped with up to eight ON/OFF function buttons. It has five configurable Light Emitting Diodes (LED) for machine and status feedback. The buttons and the LED’s can be configured for a variety of different operations. The unit is powered with 3 standard AAA batteries and the backside has a belt clip for convenient attachment on the operator’s belt. LED 1 LED 2 LED 3 LED 4 LED 5 Button 1 Button 2 Button 3 Button 4 Button 6 Button 5 Button 7 Belt clip Button 8 Battery compartment (Belt clip removed) Label Document type Document number Instruction Manual 66062 Rev Page 4 of 9 Versions The G5 Pocket transmitter exists in the following versions: G5 P3 IN ON G5 P8 G5 P6 G5 P4 OUT OFF G5 P8 G5 P8 Model Functions G5 P3 G5 P4 G5 P6 G5 P8 3 Push buttons 4 Push buttons 6 Push buttons 8 Push buttons ON OFF The models may have the different printed symbols on the buttons, colors, scripts, pictures etc. Functionality The G5 Pocket systems are required to be configured prior to operation but normally this is done already before delivery. The push buttons are easily programmed to activate any output or series of functions. Button definitions include momentary, interlocked, non-latched or latched output. Fn STOP Document type Document number Instruction Manual 66062 5.4 Rev Changing battery The G5 Pocket transmitter is equipped with 3 standard AAA cell batteries; to change batteries follow the instructions below 1. Remove the belt clip by unscrewing the top middle screw. 2. Unscrew the three screws holding the lid. 3. Remove the batteries. 4. Remove all dirt/dust to ensure no water can enter the unit. 5. Insert new batteries, mind the polarity! 6. Reassemble the lid and the belt clip. Tighten the screws according to chapter 7.4. Page 5 of 9 Document type Document number Instruction Manual 66062 Rev Page 6 of 9 Technical information Attribute Information Housing material IP-class Ambient temperature Supply Operating time Weight Plastic PC-ABS IP67 -25˚C to +70˚C 3 x AAA battery Several months (depending of usage and application) 160 g (0,35lb.) including battery Dimensions: 38mm 67mm 27mm 115mm 75,2mm 38,8mm Size : approx. ~ 115 x 67 x 38 mm / ~ 4,5 x 2,6 x 1,5 in. (incl. belt clip/holder). Weight: incl. battery: approx. ~ 160 gram / ~ 0.35 lb. Document type Document number Instruction Manual 66062 Rev Page 7 of 9 Radio information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference. The radio transmission takes place within the ISM-band used at pre-defined channels. The channel switching takes place multiple times per second following a pseudorandom sequence. This ensures that transmission takes place on an optimal frequency at all times! No transmitter uses the same pseudorandom sequence order when switching channels; this minimizes the risk of two G5 systems interfering with each other. The G5 Pocket is approved to transmit on the ISM band. The radio is license free for the end user. Technical information Attribute Information Frequency Channels management 2,400 - 2,4835 GHz FHSS DSSS THSS Pseudorandom Channel order Channel capacity System address/ID Redundancy Duplex Range 100 meters <16777216 unique system addresses available CRC-16 Document type Document number Instruction Manual 66062 Rev FCC information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Industry Canada Information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3 (A)/NMB-3(A) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the device is stored on the operators belt it must be shut off. Pressing the buttons and operating the machine while the device is hanging from the belt or any other place it not allowed. It must be held in the hand. L’antenne (s) utiliseé pour cet émetteur doit être installé pour fournir une distance de séparation d’au moins 20 cm de toute personne et ne doit pas être co-localisées ou opérant en conjonction avec une autre antenne ou émetteur. Lorsque l’appareil est stocké sur la bande des opérateurs, il doit être arrêté. Appuyant sur les boutons et faire fonctionner la machine alors que l’appareil est accroché à la ceinture ou tout autre lieu il pas permis. Il doit être tenu à la main. Page 8 of 9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2014:05:12 16:25:05+02:00 Metadata Date : 2014:05:12 16:25:26+02:00 Modify Date : 2014:05:12 16:25:26+02:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:b0b1ec5f-65c6-a847-87c9-2eb1923b0b88 Original Document ID : xmp.did:F77F11740720681192B0C0797B331098 Document ID : xmp.id:127751D6072068118083F1C11B19CCCE Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:117751D6072068118083F1C11B19CCCE Derived From Document ID : xmp.did:117751D6072068118083F1C11B19CCCE Derived From Original Document ID: xmp.did:F77F11740720681192B0C0797B331098 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:05:12 16:25:05+02:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 10 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools