Scanreco RC917FHHTR02 Radio Remote Control Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1746135
Application ID	ISj8wBqugTW1YCAOrX4i/g==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	224.26kB (2803266 bits)
Date Submitted	2012-07-18 00:00:00
Date Available	2012-07-18 00:00:00
Creation Date	2012-07-09 16:41:22
Producing Software	ScanSoft PDF Create! 5
Document Lastmod	2012-07-09 16:41:22
Document Title	Microsoft Word - RC917FHH-TR02 User manual and upgrade instruction_
Document Creator	Microsoft Word - RC917FHH-TR02 User manual and upgrade instruction_
Document Author:	AndreiSa

RC 917/TR02
User manual and upgrade instruction
RC917/TR02
Developed for demanding environments
Scanreco´s RC917 / TR02 is built and designed for the toughest and most demanding
of environments. Scanreco can hereby offer the market of crane and machine
operators an extremely easy to use radio remote control retaining speed,
precision, and control with the maximum of safety.
Behind the development of the radio transceivers lies the idea
of providing a product with a high degree of reliability, user-friendliness,
and easy upgrade for cable systems or other data radio applications.
The product family includes different transceivers and
receivers offering a variety of choice depending on the area of use. These products
are based on a modular architecture, which makes them extremely flexible
to customize and adapt according to the customer’s needs.
The products – which are in high demand – are mainly mounted on cranes
and mobile machines. Our customers are some of the world’s largest and most
challenging crane and machinery manufacturers. Thousands of cranes and
machines containing Scanreco’s radio products are in use worldwide.
Our products are deployed everywhere, from truck cranes laying heating
pipes in Stockholm to lifting oil pipelines in Russia and setting in place concrete
sections in Singapore.
Scanreco –
freedom in a box
Our customers development
is our own development. This
enables us to offer:
 Customer-specific solutions  
 Industrial know-how
 Expertise and experience
 Innovative capacity
 Nimble organisation
 Quality
 Delivery precision
 Service
www.scanreco.se
RC 917/TR02
User manual and upgrade instruction
How to use the TR02 for user defined multi purpose use
The control and power connector is a standard 2.54mm, 8way pin row.
The functions of the pin s are as follows:
Pin 1: Power supply and signal ground.
Pin 2: Power supply positive terminal.
Accepts 6 to 8VDC. 7.2VDC nominal.
Pin 3: Data input.
Pin 4: Clock input.
Pin 5: Load signal.
Pin 6: Transmit data input. TTL levels.
Pin 7: Transmit/receive input signal. TTL levels. Logic level” 1” on this pin and a RSSI value
below 95dBm will put the module in transit mode. If the RSSI value exceeds 95dBm t
he module enters receive mode. Logic level ”0” will force receive mode.
Pin 8: Received data output. TTL levels.
Pins 3 to 5 make together an SPI port for receiving channel information. Upon start up the
mother board on which the module is mounted will send the channel frequency information
on this port. The module will then enters receive or transmit mode depending on
the status of pin 7. In receive mode the received data will appear asynchronously on pin8.
In transmit mode the asynchronous data on pin 6 will be buffed and fed to modulator
at the same time the output amplifier will be enabled.
The high power version RC917FHH has the output power less than 18dBm when it uses in the
hand held remote control units. The max output power 18dBm of hand held units is programmed
under production at the factory and not possible to change under using by the customer.
There are two antenna connectors, which cannot be used simultaneously.
The antenna types used with the module are presented in the table:
Antenna type
Internal wire λ/4
Internal dipole antenna
External λ/4 Helix
External λ/4 whip
External Right Angle
λ/4
Details
8cm length,
Stranded Ø1,2mm
conductor,
Ø2,2mm total
Total length 16cm,
coax cable RG316
Total height 12cm
Total length 82mm
Manufacture
Scanreco
Part number
44374
Connector
Soldered
Gain
1,5dBi
Scanreco
47146
Soldered
2,5dBi
Scanreco
Scanreco
RP-SMA
TNC
2,8dBi
2,6dBi
Total length 45 mm
Jinchang
(or similar: Taoglas TG.22.0112,
Pulse W1900/1902,
Antenna Factor ANT-916-CW)
47938
47123/3824179
JC-GSM-000-55SMAGSM
SMA
3,5dBi
In case of internal antenna it will be always located at least 2,5 cm from the nearest
host enclosure wall.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Warning
The external antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with any other
transmitter
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment
Typical customer application
as an example
NOTE: if you need assistance or customer
defined application, please contact
Scanreco customer support.
RC 917/TR02
User manual and upgrade instruction
Instruction how to upgrade all Scanreco RC 917 systems,
Note: Pictures show a typical RC 917 system but upgrade
process is valid for all types of RC 917.
1/ Open control pult and locate place
for radio modul*
2/ Install TR02 intended for control pult.
Tighten the supplied screws*, normally 4
Note: Different
t y p e of holders
for wire antenna
is supplied
depending type
of RC 917 system
3/ Reassembly control pult and continue to step 4.
www.scanreco.se
www.scanreco.se
RC 917/TR02
User manual and upgrade instruction
4/ Open the receiver box
locate place for radio module*
5/
Install TR02 intended for
Receiver
box
and
tighten
supplied screws*, normally 4.
6/ Install antenna cabel
in appropriate inlet on box
and connect to TR02 the SMA connector.
7/ Reassembly receiver box,
go to step 8.
8/ Start up system and according
to system manual RC 917,
restart and pair system without
cable control attached.
Note:The SW in RC 917 will automatic
install and identify your upgraded system
for Radio Remote Controller.
This procedure is valid for all RC 917 intended to use with RC 917
10/ Upgrade procedure is done and customer are
now able to enjoy a Radio Control System.
www.scanreco.se

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Creator                         : Microsoft Word - RC917FHH-TR02 User manual and upgrade instruction_
Producer                        : ScanSoft PDF Create! 5
Create Date                     : 2012:07:09 16:41:22+01:00
Modify Date                     : 2012:07:09 16:41:22+01:00
Author                          : AndreiSa
Title                           : Microsoft Word - RC917FHH-TR02 User manual and upgrade instruction_
Page Count                      : 5
Page Mode                       : UseNone

EXIF Metadata provided by EXIF.tools