Schlage Electronics Solution Sheet Lenel AD 300 400 105080
User Manual: Schlage Electronics Solution Sheet Lenel AD 300 AD 400 Data Sheets
Open the PDF directly: View PDF 
.
Page Count: 4
Overview
Schlage AD Series hardwired and wireless locks seamlessly integrate with Lenel
OnGuard® (version 6.6 SP1 or higher) to provide a cost eective and scalable access
control solution.
OnGuard® oers advanced access control, alarm monitoring, digital video, intrusion
detection, asset tracking, information security integration, credential production, and
employee and visitor management functionality. Individual application modules are
available as standalone systems or can be deployed in any combination to deliver a
single, seamlessly integrated solution.
The AD Series is available in both hardwired and wireless configurations to suit the
requirements of the facility. AD Series wireless locks provide many of the key benefits
of a hardwired system including real-time monitoring, audit trails, centralized
lockdown and instant access control management. In retrofit applications, the
Schlage AD Series wireless locks and device, which eliminate the need to run wires
direct to each opening, can help you extend the reach of your access control system.
AD Series wireless locks combine the components typically found around the door,
such as the door position switch and the request-to-exit switch, into one unit which
simplifies installation and saves money. And since they are designed to be modular,
Schlage AD Series locks can easily be upgraded in the future to meet your changing
security and technology requirements.
System Capabilities
Summary
§ AD-300 hardwired:
− Field configurable fail safe/fail secure
§AD-400 wireless:
− Secure 900 MHz wireless communication,
AES-128 encrypted
− Real time access control and monitoring
− Powered by four (4) standard o-the-shelf
AA batteries
− Lenel OnGuard supports Remote Linking of
AD-400 wireless locks
§Patent pending wireless lockdown/unlock
feature via PIM400 (10 seconds or less
preserves up to 2 year battery life
§Additional details on readers supported and
chassis types available on page 3 and 4
§Weather resistant, exterior operating
temperature: -31° to 151°F (-35° to 66°C)
§Additional wireless products also available
− Wireless Portable Reader (WPR400) for
muster stations, buses, etc.
− Wireless Reader Interface (WRI400)
− Eliminate running wires to remote doors, gate,
and elevator applications
§ANSI/BHMA A156.25, ANSI/BHMA Grade 1,
UL 294, UL 10C
Integrated
security solution
with AD-400 wireless devices,
AD-300 hardwired locks and
Lenel OnGuard®
For additional information contact Lenel: 1.800.631.6046 or www.lenel.com
Lenel OnGuard®
System
Lenel OnGuard®
System
§LNL-3300 supports up to
64 AD Series locks total
§LNL-3300 supports a maximum of
8 PIM400-485s or AD-300s
per RS-485 port
There are 2 ports on each LNL-3300
§Wireless range up to 200’ in building
construction, up to 1000’ line of sight
NOTE: Although not specifically shown, both
AD-300s and AD-400s can be managed on a
common port
PIM400-1501
Schlage protocol
RS-485
Schlage protocol
RS-485
PIM400-485
Panel interface module
PIM400-485
Panel interface module
AD-400
Wireless devices
AD-400
Wireless devices
AD-300
Hardwired devices
AD-400
Wireless devices
Ethernet
LNL-3300
Intelligent system
controller
PoE network
switch1
LNL-3300
Intelligent system
controller
900 MHz
900 MHz
Ethernet
Ethernet
900 MHz
PoE (Power Over
Ethernet)
Schlage protocol
RS-485
Note:
Please refer to AD-300, AD-400, PIM400-485, PIM400-TD2, PIM400-1501, WPR400, and WRI400 data sheets for complete AD Series specifications
Rev. 6.6 SP1
or higher
§PIM400-1501 supports up to 16
AD-400 devices
§Wireless range Up to 200’ in building
construction, up to 1000’ line of site
1 In order to have a UL Listed configuration a UL294
12VDC power supply must be used instead of PoE
Firmware
Rev 1.188 or
higher
§LNL-3300 supports up to 16 AD-300
locks (up to 8 AD-300 locks on each
RS-485 port)
NOTE: Although not specifically shown, both
AD-300s and AD-400s can be managed on a
common port
AD-400 via RS-485
AD-400 via PIM400-1501
(PIM400-485 plus LNL-2210 in same enclosure)
Firmware
Rev 1.188
or higher
AD-300 via RS-485 with LNL-3300
Lenel OnGuard®
System
Rev. 6.6 SP1
or higher
Rev. 6.6 SP1
or higher
Contact Lenel when designing or adding on to a current system
that currently uses the LNL-500W to support the AD-400.
AD-300
Hardwired devices
Lenel OnGuard®
System
AD-300/301
Hardwired devices
LNL-2210
Ethernet
PoE (Power Over
Ethernet)
Rev. 6.6 SP1
or higher
PoE network switch1
§LNL-2210 can control a total of 8 AD-300/301
on a common RS-485 data line
§LNL-2210 can PoE (Power Over Ethernet)
2 AD-300/301
§Remaining 6 AD-300/301 will be powered
from an external 12/24VDC power supply.
AD-300/301 via RS-485 with LNL-2210
Firmware
Rev 1.187
or higher
For additional information contact Lenel: 1.800.631.6046 or www.lenel.com
System capabilities:
AD-400
PIM400-485
(LNL-3300)
AD-400
PIM400-1501
(PIM400-485 +
LNL-2210)
AD-300
Direct RS-485
(LNL-3300)
AD-300
(LNL-2210)
Features
Maximum number of readers supported by
controller/PIM
64 16 16 8 AD-300 (LNL-2210
can PoE (Power
Over Ethernet)
2 AD-300/301)
Maximum number of readers per PIM400 16 16 N/A N/A
Maximum number of PIM400s and/or
AD-300s per RS-485 port
Up to 8 N/A Up to 8 Up to 8
Access control decision made
by host or by lock database
Host Host Host Host
Remote Linking capability via Host Yes Ye s N/A N/A
Readers - see supported card formats below
Keypad only Yes (up to 9 digits) Yes (up to 9 digits) Yes (up to 9 digits) Yes (up to 9 digits)
Magnetic stripe card Yes Yes Yes Yes
Multi-technology - 125 kHz proximity
and 13.56 MHz smart card
Yes Yes Yes Yes
PIV & PIV-I card compatible1 Yes Yes Yes Yes
Card + PIN Yes (up to 9 digits) Yes (up to 9 digits) Yes (up to 9 digits) Yes (up to 9 digits)
Status monitors
Request to exit Yes Yes Yes Yes
Door position Yes Ye s Yes Ye s
Mechanical key override Yes Ye s Yes Ye s
Request to enter No No No No
Low battery status Yes Ye s N/A N/A
Communication status: RF/RS-485 Yes /Yes Yes /Yes Yes Yes
Remote lockdown/unlock Yes (<10 sec)2 Yes (<10 sec)2 Yes Ye s
Deadbolt position Yes Ye s Yes Ye s
Interior push button Yes Ye s Yes Ye s
Lock functions
Classroom/storeroom Yes Yes Yes Yes
Oce/toggle Ye s Yes Yes Ye s
Privacy Yes Yes Ye s Yes
Apartment Yes Yes Ye s Ye s
Proximity cards (125 kHz):
§AWID®
§GE/CASI®
§HID®
§Schlage®
§XceedID®
Smart cards (13.56 MHz):
§aptiQ MIFARE Classic
§aptiQ MIFARE DESFire EV1
§PIV and PIV-I compatible1
Smart cards (13.56 MHz) -
reads card serial number only:
§HID iCLASS®
§DESFire®
§MIFARE®
§MIFARE DESFire™ EV1
Please contact
Lenel for additional
details on integrated
features and credentials
supported.
1 FIPS-201-1 compliant option available requires FMK reader: The AD Series can be used in applications which require approval by the U.S. Federal Government under HSPD-12 for FIPS
201-1 compliance. Specific components are required, please see the AD-401 and AD-301 data sheet for complete details. Contact Lenel to confirm they are able to support your FIPS
201-1 credential format.
2 For greater than 1 device will be <20 sec
Supported card formats
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands
like CISA®
, Interflex®
, LCN®
, Schlage® and Von Duprin®
. Focusing on security around the
door and adjacent areas, Allegion produces a range of solutions for homes, businesses,
schools and other institutions. Allegion is a $2 billion company, with products sold in
almost 130 countries. For more, visit www.allegion.com.
About Allegion
© 2015 Allegion
005080, Rev. 08/15
www.allegion.com/us
Available AD Series reader modules
Magnetic stripe
(insertion)
KeypadMulti-technology
§Proximity
§Smart card
Handheld device
(HHD)
Used to initialize,
configure, and test
AD Series Devices
Magnetic stripe
(swipe)
Multi-technology
§Proximity
§Smart card
KEYPAD
+
FIPS 201-1 compliant
option available (FMK)
Magnetic stripe
(swipe)
KEYPAD
Magnetic stripe
(insertion)
KEYPAD
+ +
Mortise Lock
(AD-300/400)
Cylindrical Lock
(AD-300/400)
The AD Series exit trims are exclusively
compatible with exit devices made by Allegion
when using the low current request to exit switch
(RX-LC part # 050281 for Von Duprin 98/99 &
Von Duprin 22/22F Rim/SVR devices and part
number 650359 for Falcon 25 Rim devices).
Exit Device Trim
(AD-300/400-993)
Allegion, the Allegion logo, Schlage, the Schlage logo, Von Duprin, Falcon, and aptiQ are trademarks of Allegion plc, its subsidiaries
and/or aliates in the United States and other countries. All other trademarks are the property of their respective owners.
For additional information contact Lenel: 1.800.631.6046 or www.lenel.com
605
Bright brass
606
Satin brass
612
Satin bronze
643e
Aged bronze
619
Satin nickel
626
Satin chrome
626AM
Satin chrome with
antimicrobial
625
Bright chrome
Finishes
Warm tone finishes Cool tone finishes
Lever styles
Standard cylinders shown, SFIC and FSIC also available.
Sparta Rhodes
Athens Tubular
Compatibility
AD Series electronic locks from Schlage
are built from the ground up to provide
more options, more functionality and more
compatibility than any other solution on
the market today. Designed to suite with
the most popular lever styles and finishes,
Schlage AD Series locks can be configured to
accept most major key systems. See lever and
cylinder compatibility data sheet (010432).
