Schlage Electronics Solution Sheet IDenticard AD 300 400 105628
User Manual: Schlage Electronics Solution Sheet IDenticard AD 300 AD 400 Data Sheets
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Integrated security solution with AD-400/401 wireless and AD-300/301 hardwired devices and PremiSys™ Overview Schlage AD Series locks seamlessly integrate with PremiSys™ by IDenticard to provide a cost effective and scalable access control solution to meet your security needs. System Capabilities Summary §§ AD-300 /301 hardwired: −− Field configurable fail safe/fail secure §§ AD-400/401 wireless: −− Secure 900 MHz wireless communication, AES-128 bit encrypted −− Real-time access control and monitoring −− Powered by four (4) standard off-the-shelf AA batteries −− Patent pending wireless lockdown /unlock feature via PIM400 10 seconds or less (preserves up to 2 years battery life) §§ Additional details on readers supported and chassis types available on page 3 and 4 §§ Weather resistant, exterior operating temperature: -31° to 151°F (-35° to 66°C) §§ Additional wireless products also available −− Wireless Portable Reader (WPR400) for muster stations, buses, etc. §§ ANSI/BHMA A156.25, ANSI/BHMA Grade 1, UL 294, UL 10C Schlage AD Series locks combine the components typically found around the door, such as the door position switch and the request to exit switch, into one unit which simplifies installation and saves money. And since they are designed to be modular, Schlage AD Series locks can easily be upgraded in the future to meet your changing security and technology requirements. The AD Series is available in both hardwired and wireless configurations to suit the requirements of the facility. AD Series wireless locks provide many of the key benefits of a hardwired system including real-time monitoring, audit trails, centralized lockdown and instant access control management. In retrofit applications the Schlage AD Series wireless locks and devices, which eliminate the need to run wires direct to each opening, can help you extend the reach of your access control system. AD-401 and AD-301 FIPS 201-1 compliant solutions available using FMK reader. Existing AD-300 and AD-400 locks can be upgraded to FIPS compliant solutions by replacing existing reader with new FMK reader. Please contact IDenticard to confirm they will be able to support your FIPS 201 credential format. AD-400/401 via RS-485 with PremiSys™ and the IP Controller (PREM-CTLRIP) §§ §§ The IP Controller supports up to 64 doors across 2 RS-485 lines −− Each connected PIM400-485 can support 16 wireless devices −− Each connected PIM400-TD2 can support up to 2 wireless devices Wireless range up to 200’ in typical building construction, 1000’ clear line of sight Schlage protocol v2.15a or higher Ethernet Version 1.18.8 or greater RS-485 900 MHz RS-485 PIM400-485 Panel interface module PremiSys™ AD-400/401 Wireless devices PREM-CTLRIP NOTE: Although not specifically shown, both AD-300s and AD-400s can be managed on a common port MR-52, MR-50, EP-1502 (reader interface only) Wiegand or Clock and Data protocol 900 MHz PIM400-TD2 Panel interface module AD-400/401 Wireless devices AD-300/301 via RS-485 with PremiSys™ and the IP Controller (PREM-CTLRIP) §§ §§ The PREM-CTLRIP supports a maximum of 16 AD Series locks across up to 2 RS-485 ports. Each connected PIB300-2D can support up to 2 wired devices NOTE: Although not specifically shown, both AD-300s and AD-400s can be managed on a common port Schlage protocol v2.15a or higher PremiSys™ Ethernet Version 1.18.8 or greater RS-485 RS-485 AD-300/301 Hardwired devices PREM-CTLRIP MR-52, MR-50, EP-1502 (reader interface only) Wiegand or clock and data protocol PIB300-2D x RLBD Panel interface module Note: Please refer to AD-400, AD-401, AD-300, AD-301, PIB300-2D, PIM400-485, PIM400-TD2, and RLBD data sheets for complete AD Series specifications.. For additional information contact IDenticard Systems: 800.233.0298 or www.identicard.com AD-300/301 Hardwired devices System capabilities: AD-400/401 PIM400-485 AD-400/401 PIM400-TD2 AD-300/301 Direct RS-485 Maximum Number of readers supported by controller 64 64 16 Maximum Number of readers per PIM400 16 2 N/A Maximum Number of PIM400s and/or AD-300s per RS-485 port Up to 8 Up to 8 Up to 8 Access control decision made by host software or by lock database Host Host Host Remote Linking capability via Host No No N/A Keypad only Yes Yes Yes (up to 15 digits) Magnetic stripe card Yes Yes Yes Features Readers - see supported card formats below Multi-technology - 125 kHz proximity and 13.56 MHz smart card Yes Yes Yes PIV & PIV-I card compatible 1 Yes Yes Yes (+) Card + PIN Yes Yes Yes (up to 15 digits) Request to exit Yes Yes Yes Door position Yes Yes Yes Mechanical key override No No No Request to enter No No No Low battery status Yes Yes N/A Communication status: RF/RS485 Yes / Yes Yes / Yes Yes Remote lockdown/unlock 2 Yes (<10 sec)2 Yes2, 3 Yes Deadbolt position No No No Interior push button No No No Yes Yes Yes Status monitors Lock functions Classroom/storeroom Please contact IDenticard Systems for additional details on integrated features and credentials supported. 1 Supported card formats Proximity cards (125 kHz): §§ AWID® §§ GE/CASI® §§ HID® §§ Schlage® §§ XceedID® Smart cards (13.56 MHz): §§ aptiQ™ MIFARE Classic §§ aptiQ™ MIFARE DESFire™ EV1 §§ PIV and PIV-I compatible 1 Smart cards (13.56 MHz) reads card serial number only: §§ HID iCLASS® §§ DESFire® §§ MIFARE® §§ MIFARE DESFire™ EV1 FIPS-201-1 compliant option available requires FMK reader: The AD Series can be used in applications which require approval by the U.S. Federal Government under HSPD-12 for FIPS 201-1 compliance. Specific components are required, please see the AD-401 and AD-301 data sheet for complete details. Contact Imron to confirm they are able to support your FIPS 201-1 credential format. 2 For greater than 1 device will be <20 sec 3 ** Wake-up on Radio over PIM400-TD2 on up to 2 doors requires configuration at PIM via HHD For additional information contact IDenticard Systems: 800.233.0298 or www.identicard.com Available AD Series reader modules Multi-technology Multi-technology §§ Proximity §§ Smart card §§ Proximity §§ Smart card + KEYPAD Magnetic stripe (insertion) + Magnetic stripe (insertion) KEYPAD Magnetic stripe (swipe) + Keypad Magnetic stripe (swipe) KEYPAD Used to initialize, configure, and test AD Series Devices FIPS 201-1 compliant option available (FMK) Compatibility Mortise Lock (AD-300/400-MS) Handheld device (HHD) Cylindrical Lock (AD-300/400-CY) Exit Device Trim (AD-300/400-993) AD Series electronic locks from Schlage are built from the ground up to provide more options, more functionality and more compatibility than any other solution on the market today. Designed to suite with the most popular lever styles and finishes, Schlage AD Series locks can be configured to accept most major key systems. See lever and cylinder compatibility data sheet (010432). The AD Series exit trims are exclusively compatible with exit devices made by Allegion when using the low current request to exit switch (RX-LC part # 050281 for Von Duprin 98/99 & Von Duprin 22/22F Rim/SVR devices and part number 650359 for Falcon 25 Rim devices). Lever styles Finishes Standard cylinders shown, SFIC and FSIC also available. Warm tone finishes Sparta Rhodes 605 Bright brass Athens Tubular 606 Satin brass Cool tone finishes 612 Satin bronze 643e Aged bronze 619 Satin nickel 625 Bright chrome 626 Satin chrome 626AM Satin chrome with antimicrobial Allegion, the Allegion logo, Schlage, the Schlage logo, Von Duprin, Falcon, and aptiQ are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners. About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit www.allegion.com. © 2015 Allegion 005628, Rev. 08/15 www.allegion.com/us For additional information contact IDenticard Systems: 800.233.0298 or www.identicard.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2015:09:22 15:57:22-05:00 Metadata Date : 2015:09:22 15:57:42-05:00 Modify Date : 2015:09:22 15:57:42-05:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:f6df761b-46c2-5341-b80f-676ce4212eb5 Original Document ID : xmp.did:1B9DBD0D2A2068119A82B324BB5F3DDD Document ID : xmp.id:703B8D5392206811822ABDEE02568EF3 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:6F3B8D5392206811822ABDEE02568EF3 Derived From Document ID : xmp.did:1CB6BF89162068118C1489D7440FC06D Derived From Original Document ID: xmp.did:1B9DBD0D2A2068119A82B324BB5F3DDD Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2015:09:22 15:57:22-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 4 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools