Schlage Electronics Solution Sheet IDenticard AD 300 400 105628

User Manual: Schlage Electronics Solution Sheet IDenticard AD 300 AD 400 Data Sheets

Open the PDF directly: View PDF .
Page Count: 4

Overview

Schlage AD Series locks seamlessly integrate with PremiSys™ by IDenticard

to provide a cost eective and scalable access control solution to meet your

security needs.

Schlage AD Series locks combine the components typically found around the door,

such as the door position switch and the request to exit switch, into one unit which

simplifies installation and saves money. And since they are designed to be modular,

Schlage AD Series locks can easily be upgraded in the future to meet your changing

security and technology requirements.

The AD Series is available in both hardwired and wireless configurations to suit the

requirements of the facility. AD Series wireless locks provide many of the key benefits

of a hardwired system including real-time monitoring, audit trails, centralized

lockdown and instant access control management. In retrofit applications the Schlage

AD Series wireless locks and devices, which eliminate the need to run wires direct to

each opening, can help you extend the reach of your access control system.

AD-401 and AD-301 FIPS 201-1 compliant solutions available using FMK reader.

Existing AD-300 and AD-400 locks can be upgraded to FIPS compliant solutions by

replacing existing reader with new FMK reader. Please contact IDenticard to confirm

they will be able to support your FIPS 201 credential format.

System Capabilities

Summary

§AD-300 /301 hardwired:

− Field configurable fail safe/fail secure

§AD-400/401 wireless:

− Secure 900 MHz wireless communication,

AES-128 bit encrypted

− Real-time access control and monitoring

− Powered by four (4) standard o-the-shelf

AA batteries

− Patent pending wireless lockdown /unlock

feature via PIM400 10 seconds or less

(preserves up to 2 years battery life)

§Additional details on readers supported and

chassis types available on page 3 and 4

§Weather resistant, exterior operating

temperature: -31° to 151°F (-35° to 66°C)

§Additional wireless products also available

− Wireless Portable Reader (WPR400) for

muster stations, buses, etc.

§ANSI/BHMA A156.25, ANSI/BHMA Grade 1,

UL 294, UL 10C

Integrated

security solution

with AD-400/401 wireless and

AD-300/301 hardwired devices

and PremiSys™

For additional information contact IDenticard Systems: 800.233.0298 or www.identicard.com

§The IP Controller supports up to 64

doors across 2 RS-485 lines

− Each connected PIM400-485 can

support 16 wireless devices

− Each connected PIM400-TD2 can

support up to 2 wireless devices

§Wireless range up to 200’ in typical

building construction, 1000’ clear line

of sight

NOTE: Although not specifically shown, both AD-300s

and AD-400s can be managed on a common port

§The PREM-CTLRIP supports a maximum

of 16 AD Series locks across up to 2

RS-485 ports.

§Each connected PIB300-2D can support

up to 2 wired devices

NOTE: Although not specifically shown, both AD-300s

and AD-400s can be managed on a common port

Note:

Please refer to AD-400, AD-401, AD-300, AD-301, PIB300-2D, PIM400-485, PIM400-TD2, and RLBD data sheets for complete AD Series specifications..

AD-400/401 via RS-485 with

PremiSys™ and the IP Controller (PREM-CTLRIP)

AD-300/301 via RS-485 with

PremiSys™ and the IP Controller (PREM-CTLRIP)

PremiSys™

PremiSys™

PIM400-TD2

Panel interface module

PIB300-2D x RLBD

Panel interface module

PIM400-485

Panel interface module

AD-400/401

Wireless devices

AD-300/301

Hardwired devices

AD-400/401

Wireless devices

AD-300/301

Hardwired devices

Ethernet

Ethernet

Schlage

protocol

Schlage

protocol

Wiegand or

Clock and Data

protocol

Wiegand or

clock and data

protocol

RS-485

RS-485

RS-485

RS-485

PREM-CTLRIP

PREM-CTLRIP

900 MHz

900 MHz

Version

1.18.8

or greater

Version

1.18.8

or greater

v2.15a

or higher

v2.15a

or higher

MR-52, MR-50,

EP-1502

(reader

interface only)

MR-52,

MR-50,

EP-1502

(reader

interface only)

For additional information contact IDenticard Systems: 800.233.0298 or www.identicard.com

System capabilities:

AD-400/401

PIM400-485

AD-400/401

PIM400-TD2

AD-300/301

Direct RS-485

Features

Maximum Number of readers supported by controller 64 64 16

Maximum Number of readers per PIM400 16 2 N/A

Maximum Number of PIM400s and/or AD-300s per RS-485 port Up to 8 Up to 8 Up to 8

Access control decision made by host software or by lock database Host Host Host

Remote Linking capability via Host No No N/A

Readers - see supported card formats below

Keypad only Yes Ye s Yes (up to 15 digits)

Magnetic stripe card Yes Ye s Yes

Multi-technology - 125 kHz proximity and 13.56 MHz smart card Yes Ye s Yes

PIV & PIV-I card compatible 1Yes Ye s Yes (+)

Card + PIN Yes Ye s Yes (up to 15 digits)

Status monitors

Request to exit Yes Yes Yes

Door position Yes Ye s Yes

Mechanical key override No No No

Request to enter No No No

Low battery status Yes Ye s N/A

Communication status: RF/RS485 Yes / Yes Yes / Yes Yes

Remote lockdown/unlock 2Yes (<10 sec)2Yes 2, 3 Yes

Deadbolt position No No No

Interior push button No No No

Lock functions

Classroom/storeroom Yes Yes Yes

Proximity cards (125 kHz):

§AWID®

§GE/CASI®

§HID®

§Schlage®

§XceedID®

Please contact

IDenticard Systems

for additional details

on integrated features

and credentials

supported.

1 FIPS-201-1 compliant option available requires FMK reader: The AD Series can be used in applications which require approval by the U.S. Federal Government under HSPD-12 for FIPS

201-1 compliance. Specific components are required, please see the AD-401 and AD-301 data sheet for complete details. Contact Imron to confirm they are able to support your FIPS

201-1 credential format.

2 For greater than 1 device will be <20 sec

3 ** Wake-up on Radio over PIM400-TD2 on up to 2 doors requires configuration at PIM via HHD

Supported card formats

Smart cards (13.56 MHz):

§aptiQ™ MIFARE Classic

§aptiQ™ MIFARE DESFire™ EV1

§PIV and PIV-I compatible 1

Smart cards (13.56 MHz) -

reads card serial number only:

§HID iCLASS®

§DESFire®

§MIFARE®

§MIFARE DESFire™ EV1

Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands

like CISA®

, Interflex®

, LCN®

, Schlage® and Von Duprin®

. Focusing on security around the

door and adjacent areas, Allegion produces a range of solutions for homes, businesses,

schools and other institutions. Allegion is a $2 billion company, with products sold in

almost 130 countries. For more, visit www.allegion.com.

About Allegion

© 2015 Allegion

005628, Rev. 08/15

www.allegion.com/us

Available AD Series reader modules

The AD Series exit trims are exclusively

compatible with exit devices made by Allegion

when using the low current request to exit switch

(RX-LC part # 050281 for Von Duprin 98/99 &

Von Duprin 22/22F Rim/SVR devices and part

number 650359 for Falcon 25 Rim devices).

Allegion, the Allegion logo, Schlage, the Schlage logo, Von Duprin, Falcon, and aptiQ are trademarks of Allegion plc, its subsidiaries

and/or aliates in the United States and other countries. All other trademarks are the property of their respective owners.

For additional information contact IDenticard Systems: 800.233.0298 or www.identicard.com

Magnetic stripe

(insertion)

KeypadMulti-technology

§Proximity

§Smart card

Handheld device

(HHD)

Used to initialize,

configure, and test

AD Series Devices

Magnetic stripe

(swipe)

Multi-technology

§Proximity

§Smart card

KEYPAD

+

FIPS 201-1 compliant

option available (FMK)

Magnetic stripe

(swipe)

KEYPAD

Magnetic stripe

(insertion)

KEYPAD

+ +

Mortise Lock

(AD-300/400-MS)

Cylindrical Lock

(AD-300/400-CY)

Exit Device Trim

(AD-300/400-993)

605

Bright brass

606

Satin brass

612

Satin bronze

643e

Aged bronze

619

Satin nickel

626

Satin chrome

626AM

Satin chrome with

antimicrobial

625

Bright chrome

Finishes

Warm tone finishes Cool tone finishes

Lever styles

Standard cylinders shown, SFIC and FSIC also available.

Sparta Rhodes

Athens Tubular

Compatibility

AD Series electronic locks from Schlage

are built from the ground up to provide

more options, more functionality and more

compatibility than any other solution on

the market today. Designed to suite with

the most popular lever styles and finishes,

Schlage AD Series locks can be configured to

accept most major key systems. See lever and

cylinder compatibility data sheet (010432).