Schlage ND Series Service Manual 106499NDServicemanual
User Manual: Schlage ND-Series Service Manual Product Manual
Open the PDF directly: View PDF 
.
Page Count: 101
| Download | |
| Open PDF In Browser | View PDF |
ND-Series Service manual Contents 5 Introduction 49 Trim assemblies 5 Lock assembly drawing index 6 Lock assembly drawing index 11 Chassis 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 Passage latch Exit lock Exit lock with request-to-exit Exit lock— Electrically locked (fail safe) Exit lock— Electrically locked (fail safe) with request-to-exit Exit lock— Electrically unlocked (fail secure) Exit lock— Electrically unlocked (fail secure) with request-to-exit Single dummy trim Exit lock with blank plate Special— classroom exit lock Special— storeroom exit lock Patio, bath/bedroom privacy and hospital privacy lock Entrance/office and entrance lock Vestibule lock Store lock Classroom lock Special— classroom by storeroom lock Special— communicating lock Special— communicating lock with Vandlgard® Corridor lock Classroom security lock Storeroom lock Storeroom lock with request-to-exit Storeroom lock— Electrically locked (fail safe) Storeroom lock— Electrically locked (fail safe) with request-to-exit Storeroom lock— Electrically unlocked (fail secure) Storeroom lock— Electrically unlocked (fail secure) with request-toexit Institution lock Faculty restroom lock Entrance/office and entrance lock with Vandlgard® Vestibule lock with Vandlgard® Classroom lock with Vandlgard® Classroom security lock with Vandlgard® Storeroom lock with Vandlgard® Storeroom lock with Vandlgard®— Electrically locked (fail safe) Storeroom lock with Vandlgard®— Electrically unlocked (fail secure) Corridor lock with Vandlgard® 50 51 52 53 54 55 39 40 41 42 43 44 45 46 47 48 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 Passage latch Exit lock Exit lock request-to-exit Exit lock—electrically locked (fail safe) Exit lock— electrically locked (fail safe) request-to-exit Exit lock and storeroom lock— electrically unlocked (fail secure) Exit lock and storeroom lock—electrically unlocked (fail secure) request-to-exit Single dummy trim Exit lock with blank plate Special—classroom exit lock Special—storeroom exit lock Special—patio lock Bath/bedroom privacy lock Hospital privacy lock Entrance/office lock Entrance lock Vestibule lock ND60 with closed outside lever: special Store lock Classroom lock Special—classroom by storeroom lock Special—communicating lock Special—communicating lock with Vandlgard® Corridor lock Classroom security lock Storeroom lock Storeroom lock with request-to-exit Storeroom lock— electrically locked (fail safe) Storeroom lock—electrically locked (fail safe) with request-to-exit Storeroom lock—electrically unlocked (fail secure) Storeroom lock—electrically unlocked (fail secure) with request-to-exit Institution lock Faculty restroom lock Entrance/office lock wtih Vandlgard® Entrance lock with Vandlgard® Vestibule with Vandlgard® Classroom lock with Vandlgard® Classroom security lock with Vandlgard® Storeroom lock with Vandlgard® Storeroom lock with Vandlgard®— electrically locked (fail safe) Storeroom lock with Vandlgard®—electrically unlocked (fail secure) Corridor lock with Vandlgard® Schlage • ND-Series service manual • iii 92 Parts and kits 92 Full size IC and SFIC (small format interchangeable core) configurations Lever designs Tactile warning Competitor cylinder options Spring cage and tailpiece for competitor cylinder options Roses Cylinders Latches Installation tools and kits Strikes Screws, screw packs and special parts 93 93 94 94 95 95 96 96 98 99 100 Finishes 100 Finish codes and descriptions 100 Ordering procedures 101 Limited warranty iv • Schlage • ND-Series service manual Introduction This manual contains a complete listing of ND-Series (Grade 1) cylindrical lock parts and assemblies manufactured by the Schlage Lock Company. This edition lists components of ND-Series locks manufactured after November, 2003. This manual provides exploded views of each lock chassis and trim assembly with an accompanying chart to identify parts for replacement purposes, along with lock trim ordering procedures, general cylinder information, and all auxiliary components of the ND-Series cylindrical locks. Standard Features* ANSI A156.2, 2003, Series 4000, Grade 1, UL listed for 3-hour fire door Certifications Latch 1Z\,” x 2Z\v”, Square corner faceplate, 1” housing diameter, Z\x” throw Strike 1Z\v” x 4M\,”, ANSI, Square corner, no box Backset 2 C\v” Cylinder 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)** Door Range Standard Lock Functions: 1B\,” – 2Z\,” Vandlgard® Lock Functions: 1B\,” – 2Z\,” ND85: 1C\v” – 2” Keys Two nickel silver cut keys per lock, 6-pin, C123 section** * Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinder keyed 5-pin and with 5-pin keys unless otherwise specified. Lock assembly drawing index The Lock assembly drawing Index provides illustrations and textual descriptions of available functions. Page numbers for full trim and chassis drawings are referenced. Outside Inside Vandlgard ® Lever Deadlatch Key Active Lever Push button Electrified Springlatch Fixed Lever Blank Plate Turn/push button Request to Exit Schlage • ND-Series service manual • 5 Lock assembly drawing index Lock assembly drawing index Function ANSI A156.2, 1996, Series 4000, Grade 1 Trim Chassis Schlage ANSI Description Outside function Inside function Page Page ND10 F75 Passage latch Lever is always unlocked. Lever is always unlocked and is always free for immediate egress. 50 12 ND12 F89 Exit lock Lever is fixed. Lever is always unlocked and is always free for immediate egress. 51 13 Exit lock with request to exit Same as ND12. Same as ND12. 52 14 ND12EL Exit lock— electrically locked (fail safe) Lever is continuously locked by electric current until unlocked by switch or power failure. Lever is always unlocked and is always free for immediate egress. 53 15 ND12EL-RX Exit lock— electrically locked (fail safe) with request to exit Same as ND12EL. Same as ND12EL. 54 16 ND12EU Exit lock— electrically unlocked (fail secure) Lever is continuously locked mechanically until unlocked by electric current. Lever is always unlocked and is always free for immediate egress. 55 17 ND12EU-RX Exit lock— electrically unlocked (fail secure) wtih request to exit Same as ND12EU. Same as ND12EU. A microswitch attached to the chassis is activated when the lever is rotated. The switch signals use of the lever to security systems allowing non-disruptive egress. 56 18 ND170 Single dummy trim Inactive trim for one side of door. Use for door pull or as matching inactive trim. 57 19 ND12-RX A microswitch attached to the chassis is activated when the lever is rotated. The switch signals use of the lever to security systems allowing non-disruptive egress. A microswitch attached to the chassis is activated when the lever is rotated. The switch signals use of the lever to security systems allowing non-disruptive egress. Note: Any function with a deadlatch locks the latchbolt when door is closed. See page 5 for identification. * Available with Small Format Interchangeable Core. † Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 6 • Schlage • ND-Series service manual Lock assembly drawing index Function Schlage ANSI A156.2, 1996, Series 4000, Grade 1 ANSI Trim Chassis Description Outside function Inside function Page Page Exit lock with blank plate Blank plate. Inside lever is always 58 20 ND25 x 70 Classroom exit lock† per XN12-004 Blank plate. Key locks or unlocks lever. 59 21 ND25 x 80 Storeroom exit lock† per XN12-005 Blank plate Key retracts latch. Lever is fixed. 60 22 ND30 Patio lock per XN12-007 Push-button locks outside lever. Turning inside lever or closing door releases button. 61 23 Push-button locks outside lever. Turning inside lever or closing door releases button. 62 23 63 23 ND25 ND40 F76 Bath/bedroom privacy lock unlocked and is always free for immediate egress. Can be opened from outside with small screwdriver or emergency release tool. Inside lever is always free for immediate egress. ND44 Hospital privacy lock Unlocked from outside by turning emergency turn-button. Push-button locks outside lever. Turning inside lever or closing door releases button. Inside lever is always free for immediate egress. ND50 F82 Entrance/office lock* Lever is unlocked with key when push-button is pushed. Push-button locks outside lever. Turning inside lever releases button. Inside lever is always free for immediate egress. 64 24 ND53 F109 Entrance lock* Key retracts latch when button pushed and turned. Lever is unlocked with key when pushbutton is pushed. Turn/push-button: Pushing and turning button locks outside lever until manually unlocked. Push-button: pushing button locks outside lever until unlocked by turning inside lever. Inside always free for immediate egress. 65 24 ND60 F88 Vestibule lock* Latch retracted by key when locked by inside key. Inside lever is always unlocked and is always free for immediate egress. Key locks and unlocks outside lever. 66 25 Vestibule lock with closed lever outside per XN12-001 Same as ND60 except outside lever is closed. Same as ND60. Inside lever is always fee for immediate egress. 67 25 ND60 Note: Any function with a deadlatch locks the latchbolt when door is closed. See page 5 for identification. * Available with Small Format Interchangeable Core. † Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Schlage • ND-Series service manual • 7 Lock assembly drawing index Function ANSI A156.2, 1996, Series 4000, Grade 1 Trim Chassis Schlage ANSI Description Outside function Inside function Page Page ND66 F91 Store lock*† Key locks or unlocks both levers simultaneously. Key locks or unlocks both levers simultaneously. 68 26 ND70 F84 Classroom lock* Outside lever locked or unlocked by key. Inside lever is always unlocked and always free for immediate egress. 69 27 ND70 x 80 Classroom by Storeroom lock† per XN12-006 Outside lever locked or unlocked by key. Key in fixed inside lever retracts latch. 70 28 ND72 Communicating lock*† per XN12-002 Outside lever only locked or unlocked by key. Inside lever only locked or unlocked by key. 71 29 ND72 Communicating lock with Vandlgard® *† per XN12-003 Same as ND72. Same as ND72. 72 30 Vandlgard allows outside spindle to disengage from latch when locked. Vandlgard allows inside spindle to disengage from latch when locked. Corridor lock* Locked or unlocked by outside key. When locked by key it can only be unlocked by key. Push-button locks outside lever. Turning lever or closing door releases button. Inside lever is always unlocked and is always free for immediate egress. 73 31 Classroom security lock* Outside lever locked or unlocked by key in either lever. Key locks or unlocks outside lever. Inside lever is always unlocked and is always free for immediate egress. 74 32 Storeroom lock* Lever is fixed. Entrance by key only. Inside lever is always 75 33 ND73 F90 ND75 ND80 F86 unlocked and is always free for immediate egress. ND80-RX Storeroom lock* with request to exit Same as ND80. Same as ND80. A microswitch attached to the chassis is activated when the lever is rotated. The switch signals use of the lever to security systems allowing non-disruptive egress. 76 34 ND80EL Storeroom lock—electrically locked (fail safe)* Lever is continuously locked electrically. Inside lever is always unlocked and is always free for immediate egress. 77 35 Unlocked by switch or power failure. When locked, key retracts latch. Note: Any function with a deadlatch locks the latchbolt when door is closed. See page 5 for identification. * Available with Small Format Interchangeable Core. † Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 8 • Schlage • ND-Series service manual Lock assembly drawing index Function Schlage ANSI A156.2, 1996, Series 4000, Grade 1 ANSI Trim Chassis Description Outside function Inside function Page Page Storeroom lock— electrically locked (Fail safe)* with request to exit Same as ND80EL-RX. Same as ND80EL. 78 36 ND80EU Storeroom lock—electrically unlocked (Fail secure)* Lever is continuously locked mechanically until unlocked by electric current. When locked, key retracts latch. Inside lever is always unlocked and is always free for immediate egress. 79 37 ND80EU-RX Storeroom lock—electrically unlocked (Fail secure) with request to exit* Same as ND80EU-RX. Same as ND80EU. 80 38 Institution lock*† Lever is fixed. Entrance by key only. Lever is fixed. Exit by key only. 81 39 Faculty restroom lock Lever is fixed. Entrance by key only. Push-button activates occupancy indicator, allowing only emergency master key to operate. Turning lever or closing door releases indicator. Spanner-button rotation provides lock-out feature. Inside lever is always free for immediate egress. 82 40 ND80EL-RX ND82 F87 ND85 A microswitch attached to the chassis is activated when the lever is rotated. The switch signals use of the lever to security systems allowing non-disruptive egress. A microswitch attached to the chassis is activated when the lever is rotated. The switch signals use of the lever to security systems allowing non-disruptive egress. ND91 F82 Entrance/office lock with Vandlgard®* Lever is unlocked with key when push-button is pushed. Vandlgard allows outside spindle to disengage from latch when locked. Push-button locks outside lever. Turning inside lever releases button. Inside lever is always free for immediate egress. 83 41 ND92 F109 Entrance lock with Vandlgard®* Key retracts latch when button pushed and turned. Lever is unlocked with key when pushbutton is pushed. Vandlgard allows outside spindle to disengage from latch when locked. Turn/push-button: Pushing and turning button locks outside lever until manually unlocked. Push-button: pushing button locks outside lever until unlocked by turning inside lever. Inside always free for immediate egress. 84 41 ND93 F88 Vestibule lock with Vandlgard®* Latch retracted by key when locked by inside key. Key locks and unlocks lever. Vandlgard allows outside spindle to disengage from latch when locked. Inside lever is always unlocked and is always free for immediate egress. 85 42 Note: Any function with a deadlatch locks the latchbolt when door is closed. See page 5 for identification. * Available with Small Format Interchangeable Core. † Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. Schlage • ND-Series service manual • 9 Lock assembly drawing index Function ANSI A156.2, 1996, Series 4000, Grade 1 Trim Chassis Schlage ANSI Description Outside function Inside function Page Page ND94 F84 Classroom lock with Vandlgard®* Outside lever locked or unlocked by key. Vandlgard allows outside spindle to disengage from latch when locked. Inside lever is always unlocked and is always free for immediate egress. 86 43 Classroom security lock with Vandlgard®* Outside lever locked or unlocked by key in either lever. Vandlgard allows outside spindle to disengage from latch when locked. Key locks or unlocks outside lever. Inside lever is always unlocked and is always free for immediate egress. 87 44 Storeroom lock with Vandlgard®* Lever always disengaged. Entrance by key only. Vandlgard allows outside spindle to disengage from latch when locked. Inside lever is always unlocked and is always free for immediate egress. 88 45 ND96EL Storeroom lock with Vandlgard®— electrically locked (Fail safe)* Lever is continuously locked electrically. Unlocked by key or power failure or switch. Auxiliary latch deadlocks latchbolt when door is closed. Vandlgard allows outside spindle to disengage from latch when locked. Inside is always unlocked and free for immediate egress. 89 46 ND96EU Storeroom lock with Vandlgard®— electrically unlocked (Fail secure)* Lever is continuously locked until unlocked by key or electric current. Auxiliary latch deadlocks latchbolt when door is closed. Vandlgard allows outside spindle to disengage from latch when locked. Inside is always unlocked and free for immediate egress. 90 47 ND97 Corridor lock with Vandlgard®* Locked or unlocked by key. When locked by key, outside lever can only be unlocked by key. Vandlgard allows outside spindle to disengage from latch when locked. Push-button locking. Turning lever or closing door releases button. Inside is always unlocked and free for immediate egress. 91 48 ND95 ND96 F86 Note: Any function with a deadlatch locks the latchbolt when door is closed. See page 5 for identification. * Available with Small Format Interchangeable Core. † Caution: These locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 10 • Schlage • ND-Series service manual Chassis 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Passage latch Exit lock Exit lock with request-to-exit Exit lock— Electrically locked (fail safe) Exit lock— Electrically locked (fail safe) with request-to-exit Exit lock— Electrically unlocked (fail secure) Exit lock— Electrically unlocked (fail secure) with request-to-exit Single dummy trim Exit lock with blank plate Special— classroom exit lock Special— storeroom exit lock Patio, bath/bedroom privacy and hospital privacy lock Entrance/office and entrance lock Vestibule lock Store lock Classroom lock Special— classroom by storeroom lock Special— communicating lock Special— communicating lock with Vandlgard® Corridor lock Classroom security lock Storeroom lock Storeroom lock with request-to-exit Storeroom lock— Electrically locked (fail safe) Storeroom lock— Electrically locked (fail safe) with request-to-exit Storeroom lock— Electrically unlocked (fail secure) Storeroom lock— Electrically unlocked (fail secure) with request-toexit Institution lock Faculty restroom lock Entrance/office and entrance lock with Vandlgard® Vestibule lock with Vandlgard® Classroom lock with Vandlgard® Classroom security lock with Vandlgard® Storeroom lock with Vandlgard® Storeroom lock with Vandlgard®— Electrically locked (fail safe) Storeroom lock with Vandlgard®— Electrically unlocked (fail secure) Corridor lock with Vandlgard® Chassis Passage latch ND10 37 52 23 30 38 1 a 53 a a 29 a 38 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 23 Outside housing 24088544 38 Spindle N523-056 24 Inside hub 24085037 52 Gauge insert 23988066 29 Slide N523-149 53 Insert, inside hub N523-160* * Not sold separately as a part. 12 • Schlage • ND-Series service manual Chassis Exit lock ND12 37 52 23 30 22 8 1 a 53 a a a a 29 38 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 8 Keycam assembly N123-008 37 Adjustment plate N523-054 22 Spindle N523-013 38 Spindle N523-056 23 Outside housing 24088544 52 Gauge insert 23988066 24 Inside hub 24085037 53 Insert, inside hub N523-160* * Not sold separately as a part. Schlage • ND-Series service manual • 13 Chassis Exit lock with request-to-exit ND12 RX 37 52 23 30 22 8 1 a 53 a a a 49 29 51 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 8 Keycam assembly N123-008 48 RX harness N523-134 22 Spindle N523-013 49 RX harness screw N523-135 23 Outside housing 24088544 51 RX inside spindle N523-138 27 Inside hub, electrified and RX 24085078 52 Gauge insert 23988066 29 Slide N523-149 53 Insert, inside hub N523-160 * * Not sold separately as a part. 14 • Schlage • ND-Series service manual Chassis Exit lock— Electrically locked (fail safe) ND12EL 37 52 26 30 28 1 15 a 34 a a 33 36 53 29 a 35 32 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 33 Clip N523-028 6 Chassis screw L583-454 34 Wire clamp N523-029 15 Electrified keycam assembly N123-024 35 Sleeve N523-031 26 Outside electrified housing 24088551 36 Wire clamp screw N523-033 27 Inside hub, electrified and RX 24085078 37 Adjustment plate N523-054 28 Outside electrified spindle N523-019 39 Inside electrified spindle N523-057 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160* 32 Solenoid—EL N523-027 * Not sold separately as a part. Schlage • ND-Series service manual • 15 Chassis Exit lock— Electrically locked (fail safe) with request-to-exit ND12EL RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 34 Wire clamp N523-029 6 Chassis screw L583-454 35 Sleeve N523-031 15 Electrified keycam assembly N123-024 36 Wire clamp screw N523-033 26 Outside electrified housing 24088551 37 Adjustment plate N523-054 27 Inside hub, electrified and RX 24085078 46 Inside spindle electrified N523-132 28 Outside electrifed spindle N523-019 48 RX harness N523-134 29 Slide N523-149 49 RX harness screw N523-135 30 Slide clip N523-025 52 Gauge insert 23988066 32 Solenoid—EL N523-027 53 Insert, inside hub N523-160 * 33 Clip N523-028 * Not sold separately as a part. 16 • Schlage • ND-Series service manual Chassis Exit lock— Electrically unlocked (fail secure) ND12EU 37 52 26 28 30 15 1 a a 34 a 33 53 36 29 a 35 31 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 33 Clip N523-028 6 Chassis screw L583-454 34 Wire clamp N523-029 15 Electrified keycam assembly N123-024 35 Sleeve N523-031 26 Outside electrified housing 24088551 36 Wire clamp screw N523-033 27 Inside hub, electrified and RX 24085078 37 Adjustment plate N523-054 28 Outside electrified spindle N523-019 39 Inside electrified spindle N523-057 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160* 31 Solenoid—EU N523-026 * Not sold separately as a part. Schlage • ND-Series service manual • 17 Chassis Exit lock— Electrically unlocked (fail secure) with request-to-exit ND12EU RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 34 Wire clamp N523-029 6 Chassis screw L583-454 35 Sleeve N523-031 15 Electrified keycam assembly N123-024 36 Wire clamp screw N523-033 26 Outside electrified housing 24088551 37 Adjustment plate N523-054 27 Inside hub, electrified and RX 24085078 46 Inside spindle electrified N523-132 28 Outside electrifed spindle N523-019 48 Harness, RX N523-134 29 Slide N523-149 49 Screw, harness, RX N523-135 30 Slide clip N523-025 52 Gauge insert 23988066 31 Solenoid—EU N523-026 53 Insert, inside hub N523-160* 33 Clip N523-028 * Not sold separately as a part. 18 • Schlage • ND-Series service manual Chassis Single dummy trim ND170 45 14 5 No. Description Part number No. 5 Spindle pin C604-340 45 14 Spring cage assembly N123-019 Description Dummy insert Part number N523-069 For mounting two ND170 as double trim, see page 57. Schlage • ND-Series service manual • 19 Chassis Exit lock with blank plate ND25 37 52 30 23 1 53 a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 23 Outside housing 24088544 38 Spindle N523-056 24 Inside hub 24085037 52 Gauge insert 23988066 29 Slide N523-149 53 Insert, inside hub N523-160 * * Not sold separately as a part. 20 • Schlage • ND-Series service manual Chassis Special— classroom exit lock ND25X70 37 52 30 23 1 29 53 25 a a a 10 22 a 6 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 10 Keycam assembly N123-010 37 Adjustment plate N523-054 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160* 25 Inside hub 24085060 * Not sold separately as a part. Schlage • ND-Series service manual • 21 Chassis Special— storeroom exit lock ND25X80 37 52 30 23 1 29 53 25 a a a 8 22 a a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 8 Keycam assembly N123-008 37 Adjustment plate N523-054 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160* 25 Inside hub 24085060 * Not sold separately as a part. 22 • Schlage • ND-Series service manual Chassis Patio, bath/bedroom privacy and hospital privacy lock ND30, ND40 and ND44 37 52 30 23 1 22 4 17 2 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 24 Inside hub 24085037 2 Restoring slide catch C604-187 29 Slide N523-149 4 Slide catch spring C604-191 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 17 Keycam assembly N123-045 38 Spindle N523-056 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160 * * Not sold separately as a part. Schlage • ND-Series service manual • 23 Chassis Entrance/office and entrance lock ND50 and ND53 37 52 30 23 1 22 7 4 3 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No. Description Part number 1 Description Slide spring C503-019 24 Inside hub 24085037 3 Slide catch C604-188 29 Slide N523-149 4 Slide catch spring C604-191 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 7 Keycam assembly N123-007 38 Spindle N523-056 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160* * Not sold separately as a part. 24 • Schlage • ND-Series service manual Part number Chassis Vestibule lock ND60 37 52 23 30 22 7 1 a 53 a a 41 a 40 29 38 a 24 6 42 43 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 37 Adjustment plate N523-054 6 Chassis screw L583-454 38 Spindle N523-056 7 Keycam assembly N123-007 40 Plunger sleeve N523-063 22 Spindle N523-013 41 Plunger N523-064 23 Outside housing 24088544 42 Cam pin N523-065 24 Inside hub 24085037 43 Cam N523-066 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160* * Not sold separately as a part. Schlage • ND-Series service manual • 25 Chassis Store lock ND66 37 52 23 30 22 9 1 a a 53 a a a 29 44 9 22 a 25 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 9 Keycam assembly N123-009 37 Adjustment plate N523-054 22 Spindle N523-013 44 Plunger bar N523-067 23 Outside housing 24088544 52 Gauge insert 23988066 25 Inside hub 24085060 53 Insert, inside hub N523-160* * Not sold separately as a part. 26 • Schlage • ND-Series service manual Chassis Classroom lock ND70 37 52 23 30 22 10 1 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 10 Keycam assembly N123-010 37 Adjustment plate N523-054 22 Spindle N523-013 38 Spindle N523-056 23 Outside housing 24088544 52 Gauge insert 23988066 24 Inside hub 24085037 53 Insert, inside hub N523-160* * Not sold separately as a part. Schlage • ND-Series service manual • 27 Chassis Special— classroom by storeroom lock ND70X80 37 52 23 30 22 1 10 29 a a 53 25 a a 8 22 a a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No. Description Part number 1 Description Slide spring C503-019 25 Inside hub 24085060 6 Chassis screw L583-454 29 Slide N523-149 8 Keycam assembly N123-008 30 Slide clip N523-025 10 Keycam assembly N123-010 37 Adjustment plate N523-054 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160* * Not sold separately as a part. 28 • Schlage • ND-Series service manual Part number Chassis Special— communicating lock ND72 37 52 23 30 22 1 10 29 a a 53 25 a a 10 22 a 6 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 10 Keycam assembly N123-010 37 Adjustment plate N523-054 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160* 25 Inside hub 24085060 * Not sold separately as a part. Schlage • ND-Series service manual • 29 Chassis Special— communicating lock with Vandlgard® ND72 Vandlgard® 37 52 23 30 22 1 12 29 a a 53 25 a a 12 22 a a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 12 Keycam assembly N123-012 37 Adjustment plate N523-054 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160 * 25 Inside hub 24085060 * Not sold separately as a part. 30 • Schlage • ND-Series service manual Chassis Corridor lock ND73 37 52 23 30 1 22 10 2 a 53 a 4 a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 24 Inside hub 24085037 2 Restoring slide catch C604-187 29 Slide N523-149 4 Slide catch spring C604-191 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 10 Keycam assembly N123-010 38 Spindle N523-056 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160 * * Not sold separately as a part. Schlage • ND-Series service manual • 31 Chassis Classroom security lock ND75 37 52 23 22 30 9 1 a 53 a a a 44 29 38 40 a 24 6 20 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 9 Keycam assembly N123-009 38 Spindle N523-056 20 Inside cam N123-059 40 Plunger sleeve N523-063 22 Spindle N523-013 44 Plunger bar N523-067 23 Outside housing 24088544 52 Gauge insert 23988066 24 Inside hub 24085037 53 Insert, inside hub N523-160 * 29 Slide N523-149 * Not sold separately as a part. 32 • Schlage • ND-Series service manual Chassis Storeroom lock ND80 37 52 23 30 22 8 1 a 53 a a a a 29 38 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 8 Keycam assembly N123-008 37 Adjustment plate N523-054 22 Spindle N523-013 38 Spindle N523-056 23 Outside housing 24088544 52 Gauge insert 23988066 24 Inside hub 24085037 53 Insert, inside hub N523-160* * Not sold separately as a part. Schlage • ND-Series service manual • 33 Chassis Storeroom lock with request-to-exit ND80 RX 37 52 23 30 22 8 1 a 53 a a a 49 29 51 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 8 Keycam assembly N123-008 48 RX harness N523-134 22 Spindle N523-013 49 RX harness screw N523-135 23 Outside housing 24088544 51 RX inside spindle N523-138 27 Inside hub, electrified and RX 24085078 52 Gauge insert 23988066 29 Slide N523-149 53 Insert, inside hub N523-160 * * Not sold separately as a part. 34 • Schlage • ND-Series service manual Chassis Storeroom lock— Electrically locked (fail safe) ND80EL 37 52 26 30 28 1 15 a 34 a a 33 36 53 29 a 35 32 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 33 Clip N523-028 6 Chassis screw L583-454 34 Wire clamp N523-029 15 Electrified keycam assembly N123-024 35 Sleeve N523-031 26 Outside electrified housing 24088551 36 Wire clamp screw N523-033 27 Inside hub, electrified and RX 24085078 37 Adjustment plate N523-054 28 Outside electrified spindle N523-019 39 Inside electrified spindle N523-057 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160* 32 Solenoid—EL N523-027 * Not sold separately as a part. Schlage • ND-Series service manual • 35 Chassis Storeroom lock— Electrically locked (fail safe) with request-to-exit ND80EL RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 34 Wire clamp N523-029 6 Chassis screw L583-454 35 Sleeve N523-031 15 Electrified keycam assembly N123-024 36 Wire clamp screw N523-033 26 Outside electrified housing 24088551 37 Adjustment plate N523-054 27 Inside hub, electrified and RX 24085078 46 Inside spindle electrified N523-132 28 Outside electrifed spindle N523-019 48 RX harness N523-134 29 Slide N523-149 49 RX harness screw N523-135 30 Slide clip N523-025 52 Gauge insert 23988066 32 Solenoid—EL N523-027 53 Insert, inside hub N523-160 * 33 Clip N523-028 * Not sold separately as a part. 36 • Schlage • ND-Series service manual Chassis Storeroom lock— Electrically unlocked (fail secure) ND80EU 37 52 26 28 30 15 1 a a 34 a 33 53 36 29 a 35 31 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 33 Clip N523-028 6 Chassis screw L583-454 34 Wire clamp N523-029 15 Electrified keycam assembly N123-024 35 Sleeve N523-031 26 Outside electrified housing 24088551 36 Wire clamp screw N523-033 27 Inside hub, electrified and RX 24085078 37 Adjustment plate N523-054 28 Outside electrified spindle N523-019 39 Inside electrified spindle N523-057 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160* 31 Solenoid—EU N523-026 * Not sold separately as a part. Schlage • ND-Series service manual • 37 Chassis Storeroom lock— Electrically unlocked (fail secure) with request-to-exit ND80EU RX 37 52 26 30 28 15 1 a a 34 a 33 53 36 29 a 35 31 49 46 a 27 6 48 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 34 Wire clamp N523-029 6 Chassis screw L583-454 35 Sleeve N523-031 15 Electrified keycam assembly N123-024 36 Wire clamp screw N523-033 26 Outside electrified housing 24088551 37 Adjustment plate N523-054 27 Inside hub, electrified and RX 24085078 46 Inside spindle electrified N523-132 28 Outside electrifed spindle N523-019 48 Harness, RX N523-134 29 Slide N523-149 49 Screw, harness, RX N523-135 30 Slide clip N523-025 52 Gauge insert 23988066 31 Solenoid—EU N523-026 53 Insert, inside hub N523-160* 33 Clip N523-028 * Not sold separately as a part. 38 • Schlage • ND-Series service manual Chassis Institution lock ND82 37 52 23 30 22 8 1 a a 53 a a a 29 8 22 a 25 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-109 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 8 Keycam assembly N123-008 37 Adjustment plate N523-054 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160 * 25 Inside hub 24085060 * Not sold separately as a part. Schlage • ND-Series service manual • 39 Chassis Faculty restroom lock ND85 37 52 23 30 22 1 19 4 2 a 53 a a b 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No. Description Part number 1 Description Slide spring C503-019 24 Inside hub 24085037 2 Restoring slide catch C604-187 29 Slide N523-149 4 Slide catch spring C604-191 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 19 Keycam assembly N123-055 38 Spindle N523-056 22 Spindle N523-013 52 Gauge insert 23 Outside housing 24088544 * Not sold separately as a part. 40 • Schlage • ND-Series service manual Part number 53 Insert, inside hub 23988066 N523-160 * Chassis Entrance/office and entrance lock with Vandlgard® ND91 and ND92 37 52 23 30 1 22 11 4 3 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 24 Inside hub 24085037 3 Slide catch C604-188 29 Slide N523-149 4 Slide catch spring C604-191 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 11 Keycam assembly N123-011 38 Spindle N523-056 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160 * * Not sold separately as a part. Schlage • ND-Series service manual • 41 Chassis Vestibule lock with Vandlgard® ND93 37 52 23 30 22 11 1 a 53 a a 41 a 29 40 38 a 24 6 42 43 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 37 Adjustment plate N523-054 6 Chassis screw L583-454 38 Spindle N523-056 11 Keycam assembly N123-011 40 Plunger sleeve N523-063 22 Spindle N523-013 41 Plunger N523-064 23 Outside housing 24088544 42 Cam pin N523-065 24 Inside hub 24085037 43 Cam N523-066 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160 * * Not sold separately as a part. 42 • Schlage • ND-Series service manual Chassis Classroom lock with Vandlgard® ND94 37 52 23 30 22 1 12 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 12 Keycam assembly N123-012 37 Adjustment plate N523-054 22 Spindle N523-013 38 Spindle N523-056 23 Outside housing 24088544 52 Gauge insert 23988066 24 Inside hub 24085037 53 Insert, inside hub N523-160 * * Not sold separately as a part. Schlage • ND-Series service manual • 43 Chassis Classroom security lock with Vandlgard® ND95 37 52 23 22 30 18 1 a 53 a a a 29 38 40 a 24 6 44 20 a No. Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 18 Keycam assembly N123-054 38 Spindle N523-056 20 Inside cam N123-059 40 Plunger sleeve N523-063 22 Spindle N523-013 44 Plunger bar N523-067 23 Outside housing 24088544 52 Gauge insert 23988066 24 Inside hub 24085037 53 Insert, inside hub N523-160 * 29 Slide N523-149 * Not sold separately as a part. 44 • Schlage • ND-Series service manual Chassis Storeroom lock with Vandlgard® ND96 37 52 23 30 22 13 1 a 53 a a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 29 Slide N523-149 6 Chassis screw L583-454 30 Slide clip N523-025 13 Keycam assembly N123-013 37 Adjustment plate N523-054 22 Spindle N523-013 38 Spindle N523-056 23 Outside housing 24088544 52 Gauge insert 23988066 24 Inside hub 24085037 53 Insert, inside hub N523-160 * * Not sold separately as a part. Schlage • ND-Series service manual • 45 Chassis Storeroom lock with Vandlgard®— Electrically locked (fail safe) ND96EL 37 52 26 30 28 16 1 a a 34 a 33 53 36 29 a 35 32 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 33 Clip N523-028 6 Chassis screw L583-454 34 Wire clamp N523-029 16 Electrified keycam assembly—Vandlgard® N123-025 35 Sleeve N523-031 26 Outside electrified housing 24088551 36 Wire clamp screw N523-033 27 Inside hub—electrified functions 24085078 37 Adjustment plate N523-054 28 Outside electrified spindle N523-019 39 Inside electrified strike N523-057 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160 * 32 Solenoid–EL N523-027 * Not sold separately as a part. 46 • Schlage • ND-Series service manual Chassis Storeroom lock with Vandlgard®— Electrically unlocked (fail secure) ND96EU 37 52 26 30 28 16 1 a a 34 a 33 53 36 29 a 35 31 39 a 27 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. Description Part number No. Description Part number 1 Slide spring C503-019 33 Clip N523-028 6 Chassis screw L583-454 34 Wire clamp N523-029 16 Electrified keycam assembly—Vandlgard® N123-025 35 Sleeve N523-031 26 Outside electrified housing 24088551 36 Wire clamp screw N523-033 27 Inside hub—electrified functions 24085078 37 Adjustment plate N523-054 28 Outside electrified spindle N523-019 39 Inside electrified spindle N523-057 29 Slide N523-149 52 Gauge insert 23988066 30 Slide clip N523-025 53 Insert, inside hub N523-160 * 31 Solenoid—EU N523-026 * Not sold separately as a part. Schlage • ND-Series service manual • 47 Chassis Corridor lock with Vandlgard® ND97 37 52 23 30 1 22 21 2 a 53 a 4 a a 29 38 a 24 a No. 6 Apply light film of 100% synthetic grease on surfaces with brush. No. Description Part number 1 Description Slide spring C503-019 24 Inside hub 24085037 2 Restoring slide catch C604-187 29 Slide N523-149 4 Slide catch spring C604-191 30 Slide clip N523-025 6 Chassis screw L583-454 37 Adjustment plate N523-054 21 Keycam assembly N123-097 38 Spindle N523-056 22 Spindle N523-013 52 Gauge insert 23988066 23 Outside housing 24088544 53 Insert, inside hub N523-160 * * Not sold separately as a part. 48 • Schlage • ND-Series service manual Part number Trim assemblies 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 Passage latch Exit lock Exit lock request-to-exit Exit lock—electrically locked (fail safe) Exit lock— electrically locked (fail safe) request-to-exit Exit lock and storeroom lock— electrically unlocked (fail secure) Exit lock and storeroom lock—electrically unlocked (fail secure) request-to-exit Single dummy trim Exit lock with blank plate Special—classroom exit lock Special—storeroom exit lock Special—patio lock Bath/bedroom privacy lock Hospital privacy lock Entrance/office lock Entrance lock Vestibule lock ND60 with closed outside lever: special Store lock Classroom lock Special—classroom by storeroom lock Special—communicating lock Special—communicating lock with Vandlgard® Corridor lock Classroom security lock Storeroom lock Storeroom lock with request-to-exit Storeroom lock— electrically locked (fail safe) Storeroom lock—electrically locked (fail safe) with requestto-exit Storeroom lock—electrically unlocked (fail secure) Storeroom lock—electrically unlocked (fail secure) with request-to-exit Institution lock Faculty restroom lock Entrance/office lock wtih Vandlgard® Entrance lock with Vandlgard® Vestibule with Vandlgard® Classroom lock with Vandlgard® Classroom security lock with Vandlgard® Storeroom lock with Vandlgard® Storeroom lock with Vandlgard®— electrically locked (fail safe) Storeroom lock with Vandlgard®—electrically unlocked (fail secure) Corridor lock with Vandlgard® Trim assemblies Passage latch ND10 A D H J E C P C B K N Q M Letter * Description Part number Letter Description Part number A Outside lever—closed 03-030 J Anti-rotation plate N523-055 B Inside lever—closed 03-030 K Springlatch 13-048 C Rose 03-042 M Strike 10-025 D Outside spring cage—passage N123-043 N Latch screw C603-897 E Inside spring cage—standard N123-032 P Mounting screw N523-021 H Chassis 24088254* Q Strike screw C603-256 Chassis part number is for reference only. 50 • Schlage • ND-Series service manual Trim assemblies Exit lock ND12 A D H J CC E DD C P C B K N Q M Letter * Description Part number Letter Description Part number A Outside lever—closed 03-030 K Springlatch 13-048 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—passage N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088262* CC Spring C503-331 J Anti-rotation plate N523-055 DD Catch stop N523-041 Chassis part number is for reference only. Schlage • ND-Series service manual • 51 Trim assemblies Exit lock request-to-exit ND12 RX A D H CC J DD E C P C K B N Q M Letter * Description Part number Letter Description Part number A Outside lever—closed 03-030 K Springlatch 13-048 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—passage N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088437* CC Spring C503-331 J Anti-rotation plate N523-131 DD Catch stop N523-041 Chassis part number is for reference only. 52 • Schlage • ND-Series service manual Trim assemblies Exit lock—electrically locked (fail safe) ND12EL A C D GG H CC DD E P C K B N J Q M Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-106* DD Catch stop N523-041 J Anti-rotation plate N523-055 GG AC rectifier circuit C303-439 K Electrified latch ** ** Not sold separately as a part. * Chassis part number is for reference only. Schlage • ND-Series service manual • 53 Trim assemblies Exit lock— electrically locked (fail safe) request-to-exit ND12EL RX A C D GG H CC DD E P C K N J B Q M Letter Description Letter Description Part number Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-215* DD Catch stop N523-041 J Anti-rotation plate N523-131 GG AC rectifier circuit C303-439 K Electrified latch ** ** Not sold separately as a part. * Part number A Chassis part number is for reference only. 54 • Schlage • ND-Series service manual Trim assemblies Exit lock and storeroom lock— electrically unlocked (fail secure) ND12EU A C D GG H CC DD E P C B K N J Q M Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-105* DD Catch stop N523-041 J Anti-rotation plate N523-055 GG AC rectifier circuit C303-439 K Electrified latch ** ** Not sold separately as a part. * Chassis part number is for reference only. Schlage • ND-Series service manual • 55 Trim assemblies Exit lock and storeroom lock—electrically unlocked (fail secure) request-to-exit ND12EU RX A C D GG H CC DD E P C K B N J Q M Letter Description Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—closed 03-030 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—passage N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 CC Spring C503-331 H Chassis 63-216* DD Catch stop N523-041 J Anti-rotation plate N523-131 GG AC rectifier circuit C303-439 K Electrified latch ** ** Not sold separately as a part. * Part number Chassis part number is for reference only. 56 • Schlage • ND-Series service manual Trim assemblies Single dummy trim ND170 EE H F C B G N523-105 threaded mounting rod Use for mounting two (2) ND170 sets as double dummy set. Letter Description Part number Letter Description Part number B Inside lever—closed 03-030 G Washer A501-171 C Rose 03-042 H Chassis 63-104* F Dummy mounting screws L583-133 EE Dummy through bolt N523-092 * Chassis part number is for reference only. Schlage • ND-Series service manual • 57 Trim assemblies Exit lock with blank plate ND25 BB H J E P C B K N Q M Letter * Description Part number Letter Description Part number B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 E Inside spring cage—standard N123-032 P Mounting screw N523-021 H Chassis 24088296* Q Strike screw C603-256 J Anti-rotation plate N523-055 BB Blank plate N523-002 K Deadlatch 13-047 Chassis part number is for reference only. 58 • Schlage • ND-Series service manual Trim assemblies Special—classroom exit lock ND25X70 ND25X70PD (shown), ND25X70RD†, ND25X70GD† BB H J E P C S K B N Q M Letter Description Part number Letter Description Part number B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 E Inside spring cage—keyed inside except SFIC N123-021 P Mounting screw N523-021 H Chassis 24088213* Q Strike screw C603-256 J Anti-rotation plate N523-055 S Cylinder—6-pin 23-065 K Deadlatch 13-047 BB Blank plate N523-002 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 59 Trim assemblies Special—storeroom exit lock ND25X80 ND25X80PD (shown), ND25X80RD†, ND25X80GD† BB H J E P C S B K N Q M Letter Description Part number Letter Description Part number B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 E Inside spring cage—keyed inside except SFIC N123-021 P Mounting screw N523-021 H Chassis 24088221* Q Strike screw C603-256 J Anti-rotation plate N523-055 S Cylinder—6-pin 23-065 K Deadlatch 13-047 BB Blank plate N523-002 M Strike 10-025 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 60 • Schlage • ND-Series service manual Trim assemblies Special—patio lock ND30 A C D H CC R DD J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088304* V Push button N523-000 J Anti-rotation plate N523-055 CC Spring C503-331 K Deadlatch 13-047 DD Catch stop N523-041 * Chassis part number is for reference only. Schlage • ND-Series service manual • 61 Trim assemblies Bath/bedroom privacy lock ND40 A D H C Z R Y J E P C K B N Q M V Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088304* V Push button N523-000 J Anti-rotation plate N523-055 Y Emergency cylinder N523-020 K Springlatch 13-048 Z Emergency button and plunger N123-034 Chassis part number is for reference only. 62 • Schlage • ND-Series service manual Trim assemblies Hospital privacy lock ND44 A Y D H C R AA J E P C K B N Q M V Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088304* V Push button N523-000 J Anti-rotation plate N523-055 Y Emergency cylinder N523-020 K Springlatch 13-048 AA Emergency turn button and plunger N123-035 Chassis part number is for reference only. Schlage • ND-Series service manual • 63 Trim assemblies Entrance/office lock ND50 ND50PD (shown), ND50RD†, ND50GD† A C D H S R J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088247* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 V Push button N523-000 K Deadlatch 13-047 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 64 • Schlage • ND-Series service manual Trim assemblies Entrance lock ND53 ND53PD (shown), ND53RD†, ND53GD† A C D H S R J E P C K B N Q M W Letter Description Part number Letter Description Part number A Outside Lever—Open 03-031 M Strike 10-025 B Inside Lever—Open 03-031 N Latch Screw C603-897 C Rose 03-042 P Mounting Screw N523-021 D Outside Spring Cage—Standard N123-022 Q Strike Screw C603-256 E Inside Spring Cage—Standard N123-032 R Plunger—Push and Turn N123-017 H Chassis 24088247* S Cylinder—6-Pin 23-065 J Anti-Rotation Plate N523-055 W Push and Turn Button N523-001 K Deadlatch 13-047 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 65 Trim assemblies Vestibule lock ND60 ND60PD (shown), ND60RD†, ND60GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088320* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 66 • Schlage • ND-Series service manual Trim assemblies ND60 with closed outside lever: special ND60PD with closed outside lever (shown), ND60RD†, ND60GD† A C D H J CC E DD P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—closed 03-030 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—keyed inside except SFIC N123-021 S Cylinder—6-pin 23-065 H Chassis 24088320* CC Spring C503-331 J Anti-rotation plate N523-055 DD Catch stop N523-041 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 67 Trim assemblies Store lock ND66 ND66PD (shown), ND66RD†, ND66GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088338* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 68 • Schlage • ND-Series service manual Trim assemblies Classroom lock ND70 ND70PD (shown), ND70RD†, ND70GD† A C D H J E S P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088346* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 69 Trim assemblies Special—classroom by storeroom lock ND70X80 ND70X80PD (shown), NDX80RD†, ND70X80GD† A C D H J E S P C S B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088239* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 70 • Schlage • ND-Series service manual Trim assemblies Special—communicating lock ND72 ND72PD (shown), ND72RD†, ND72GD† A C D H J E S P C S B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088197* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 71 Trim assemblies Special—communicating lock with Vandlgard® ND72 Vandlgard® ® ® ® ND72PD Vandlgard (shown), ND72RD Vandlgard *, ND72GD Vandlgard * A C D H J S E P C S B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088205* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 72 • Schlage • ND-Series service manual Trim assemblies Corridor lock ND73 ND73PD (shown), ND73RD†, ND73GD† A C D H S R J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088353* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 V Push button N523-000 K Deadlatch 13-047 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 73 Trim assemblies Classroom security lock ND75 ND75PD (shown), ND75RD†, ND75GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088163* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 74 • Schlage • ND-Series service manual Trim assemblies Storeroom lock ND80 ND80PD (shown), ND80RD†, ND80GD† A C D H J E S P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088262* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 75 Trim assemblies Storeroom lock with request-to-exit ND80 RX ND80PD RX (shown), ND80RD RX, ND80GD RX A C D H J S E P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088437* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-131 † For RD (Full Size Interchangeable Core) and GD (SFIC) inside trim configurations, see 92. * Chassis part number is for reference only. 76 • Schlage • ND-Series service manual Trim assemblies Storeroom lock— electrically locked (fail safe) ND80EL ND80ELPD (shown), ND80ELRD†, ND80ELGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 63-106* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 GG AC rectifier circuit C303-439 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. ** Not sold separately as a part. * Chassis part number is for reference only. Schlage • ND-Series service manual • 77 Trim assemblies Storeroom lock—electrically locked (fail safe) with request-to-exit ND80EL RX ND80ELPD RX (shown), ND80ELRD RX, ND80ELGD RX A C D GG H S E P C K B N J Q M Letter Description Part number Letter Description Part number A Outside Lever—Open 03-031 K Electrified Latch ** B Inside Lever—Closed 03-030 M Strike 10-025 C Rose 03-042 N Latch Screw C603-897 D Outside Spring Cage—Standard N123-022 P Mounting Screw N523-021 E Inside Spring Cage—Standard N123-032 Q Strike Screw C603-256 H Chassis 63-215* S Cylinder—6-Pin 23-065 J Anti-Rotation Plate N523-131 GG AC Rectifier Circuit C303-439 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. ** Not sold separately as a part. * Chassis part number is for reference only. 78 • Schlage • ND-Series service manual Trim assemblies Storeroom lock—electrically unlocked (fail secure) ND80EU ND80EUPD (shown), ND80EURD†, ND80EUGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 63-105* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 GG Ac rectifier circuit C303-439 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. ** Not sold separately as a part. * Chassis part number is for reference only. Schlage • ND-Series service manual • 79 Trim assemblies Storeroom lock—electrically unlocked (fail secure) with request-to-exit ND80EU RX ND80EUPD RX (shown), ND80EURD RX, ND80EUGD RX A C D GG H S E P C B K N J Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 63-216* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-131 GG AC rectifier circuit C303-439 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. ** Not sold separately as a part. * Chassis part number is for reference only. 80 • Schlage • ND-Series service manual Trim assemblies Institution lock ND82 ND82PD (shown), ND82RD†, ND82GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088361* S Cylinder—6 pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 81 Trim assemblies Faculty restroom lock ND85 ND85PD A C D H S R J E P C K B N Q M FF Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push and turn N123-017 H Chassis 24088411* S Cylinder—6-pin indicator 23-003 J Anti-rotation plate N523-055 FF Push button with spanner access N523-124 Chassis part number is for reference only. 82 • Schlage • ND-Series service manual Trim assemblies Entrance/office lock wtih Vandlgard® ND91 ND91PD (shown), ND91RD†, ND91GD† A C D H S R J E P C K N B Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088379* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 V Push button N523-000 K Deadlatch 13-047 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 83 Trim assemblies Entrance lock with Vandlgard® ND92 ND92PD (shown), ND92RD†, ND92GD† A C D H S R J E P C K B N Q M W Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push and turn N123-017 H Chassis 24088379* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 W Push and turn button N523-001 K Deadlatch 13-047 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. * Chassis part number is for reference only. 84 • Schlage • ND-Series service manual Trim assemblies Vestibule with Vandlgard® ND93 ND93PD (shown), ND93RD†, ND93GD† A C D H J S E P C S K B N Q M Letter * Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088387* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 Chassis part number is for reference only. Schlage • ND-Series service manual • 85 Trim assemblies Classroom lock with Vandlgard® ND94 ND94PD (shown), ND94RD†, ND94GD† A C D H J S E P C B K N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Dead latch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088395* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. * Chassis part number is for reference only. 86 • Schlage • ND-Series service manual Trim assemblies Classroom security lock with Vandlgard® ND95 ND95PD (shown), ND95RD†, ND95GD† A C D H J S E P C S K B N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—open 03-031 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—keyed inside except SFIC N123-021 Q Strike screw C603-256 H Chassis 24088171* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 87 Trim assemblies Storeroom lock with Vandlgard® ND96 ND96PD (shown), ND96RD†, ND96GD† A C D H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Deadlatch 13-047 B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 24088403* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. * Chassis part number is for reference only. 88 • Schlage • ND-Series service manual Trim assemblies Storeroom lock with Vandlgard®— electrically locked (fail safe) ND96EL ND96ELPD (shown), ND96ELRD†, ND96ELGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 63-108* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 GG AC rectifier circuit C303-439 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. ** Not sold separately as a part. * Chassis part number is for reference only. Schlage • ND-Series service manual • 89 Trim assemblies Storeroom lock with Vandlgard®—electrically unlocked (fail secure) ND96EU ND96EUPD (shown), ND96EURD†, ND96EUGD† A C D GG H S E P C B K J N Q M Letter Description Part number Letter Description Part number A Outside lever—open 03-031 K Electrified latch ** B Inside lever—closed 03-030 M Strike 10-025 C Rose 03-042 N Latch screw C603-897 D Outside spring cage—standard N123-022 P Mounting screw N523-021 E Inside spring cage—standard N123-032 Q Strike screw C603-256 H Chassis 63-107* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 GG AC rectifier circuit C303-439 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. ** Not sold separately as a part. * Chassis part number is for reference only. 90 • Schlage • ND-Series service manual Trim assemblies Corridor lock with Vandlgard® ND97 ND97PD (shown), ND97RD†, ND97GD† A C D H S R J E P C K B N Q M V Letter Description Part number Letter Description Part number A Outside lever—open 03-031 M Strike 10-025 B Inside lever—open 03-031 N Latch screw C603-897 C Rose 03-042 P Mounting screw N523-021 D Outside spring cage—standard N123-022 Q Strike screw C603-256 E Inside spring cage—standard N123-032 R Plunger—push button N123-028 H Chassis 24088189* S Cylinder—6-pin 23-065 J Anti-rotation plate N523-055 V Push button N523-000 K Deadlatch 13-047 † For RD (Full Size Interchangeable Core) and GD (SFIC) outside trim configurations, see 92. * Chassis part number is for reference only. Schlage • ND-Series service manual • 91 Parts and kits Parts and kits Full size IC and SFIC (small format interchangeable core) configurations Full size IC—outside SFIC—outside S S V U T A Old Style IC Driver N523-077 (Obsolete) Letter Old Style IC Driver N523-118 (Obsolete) A C C D Description D Part number Letter Description Part number A Outside lever—full size IC 03-032 A Outside lever—SFIC 03-000 C Rose 03-042 C Rose 03-042 D Outside spring cage—standard N123-022 D Outside spring cage—SFIC N123-056 S Cylinder—full size IC 23-030 S Cylinder—SFIC 80-037 U IC driver N523-127 T SFIC driver N523-091 V Small format IC spacer (6-pin only) D500-000 Full size IC—outside SFIC—outside J J E Old Style IC Driver N523-077 (Obsolete) E P Old Style IC Driver N523-118 (Obsolete) P C B C U B Description Part number S V S Letter T Letter Description Part number B Inside lever—full size IC 03-032 B Inside lever—SFIC 03-000 C Rose 03-042 C Rose 03-042 E Inside spring cage —keyed inside except SFIC N123-021 E Inside spring cage—SFIC N123-057 J Anti-rotation plate N523-055 J Anti-rotation plate N523-055 P Mounting screw N523-021 P Mounting screw N523-021 S Cylinder—full size IC 23-030 S Cylinder—SFIC 80-037 U IC driver N523-127 V Small format IC spacer (6-pin only) D500-000 92 • Schlage • ND-Series service manual Parts and kits Lever designs All lever designs are available in finishes 605, 606, 612, 613, 619, 625, 626 and 626AM. Athens (ATH) C A 5¹⁄₈" 3⁷⁄₁₆" Closed levers Open levers Interchangeable core levers** SFIC levers 03-030 ATH 03-031 ATH 03-032 ATH 03-000 ATH A=2C\v” A=2C\v” A=3” A=2M\,” B=3B\zn” B=3B\zn” B=3Z\x” B=3C\,” C=2Z\x” C=2Z\x” C=2ZZ\zn” C=2Z\x” 03-030 RHO 03-031 RHO 03-032 RHO 03-000 RHO A=2M\zn” A=2M\zn” A=2C\v” A=2Z\x” B=2ZB\zn” B=2ZB\zn” B=3Z\v” B=3” 03-030 SPA 03-031 SPA 03-032 SPA 03-000 SPA A=3” A=3” A=3Z\v” A=3” B=3Z\x” B=3Z\x” B=3C\v” B=3Z\x” 03-030 OME 03-031 OME 03-032 OME 03-000 OME B=3B\zn” B=3B\zn” B=3Z\x” B=3C\,” 03-030 TLR 03-031 TLR 03-032 TLR 03-000 TLR A=2Z\v” A=2Z\v” A=2Z\x” A=2Z\v” B=3” B=3” B=3C\zn” B=3” B Rhodes (RHO) 5¹⁄₈" A * 3⁷⁄₁₆" B Sparta (SPA) 5¹⁄₂" A * 3⁷⁄₁₆" B Omega (OME) * 5⁵⁄₈" 3⁷⁄₁₆" B Tubular (TLR) 5¹⁄₂" A * 3⁷⁄₁₆" B * Meets California Fire Code for Z\x” or less return to the door. ** Lever sizes available for Competitor Cylinder Options, see 94. Not available on Omega lever style. Tactile warning Not available on Omega levers Preface design code for tactile warning levers Athens Rhodes Sparta Tubular 8AT 8RH 8SP 8TR Tubular lever Rhodes lever Schlage • ND-Series service manual • 93 Parts and kits Competitor cylinder options Competitor lever designs are available in finishes 613, 626 and 626AM. Tactile warning is available. See Tactile warning on page 93 for details. Cylinder Order suffix Description Lever design Athens Rhodes Sparta Tubular LD SAR Sargent Key In Lever 03-044-ATH 03-044-RHO 03-044-SPA 03-044-TLR JD SAR Sargent Full Size Interchangeable Core Cylinder 03-077-ATH 03-077-RHO 03-077-SPA 03-077-TLR JD CO6 Corbin Russwin Full Size Interchangeable Core 6 Pin Cylinder 03-066-ATH 03-066-RHO 03-066-SPA 03-066-TLR JD YA6 Yale Full Size Interchangeable Core 6 Pin Cylinder 03-055-ATH 03-055-RHO 03-055-RHO 03-055-TLR JD CO7 Corbin Russwin Full Size Interchangeable Core 7 Pin Cylinder UNDER DEVELOPMENT LD CO6 Corbin Russwin Key in Lever 6 Pin Cylinder JD YA7 Yale Full Size Interchangeable Core 7 Pin Cylinder Spring cage and tailpiece for competitor cylinder options Available for the following functions: ND50D, ND53D, ND60D, ND66D, ND70D, ND73D, ND75D, ND80D, ND80EL/EU, ND80EL/ EU-RX, ND82D, ND91D, ND92D, ND93D, ND94D, ND95D, ND96D, ND96DEL/EU, ND96DEL/EU-RX, and ND97D. Order suffix Description Spring cage Outside Inside(double cylinder locks) Cylinder tailpiece LD SAR Sargent Key In Lever N123-064 N123-067 N523-146 JD SAR Sargent Full Size Interchangeable Core Cylinder N123-066 N123-069 N523-148 JD CO6 Corbin Russwin Full Size Interchangeable Core 6 Pin Cylinder JD YA6 Yale Full Size Interchangeable Core 6 Pin Cylinder N123-065 N123-068 N523-147 JD CO7 Corbin Russwin Full Size Interchangeable Core 7 Pin Cylinder UNDER DEVELOPMENT LD CO6 Corbin Russwin Key in Lever 6 Pin Cylinder JD YA7 Yale Full Size Interchangeable Core 7 Pin Cylinder 94 • Schlage • ND-Series service manual Parts and kits Roses Inside/outside rose, 03-042 RHO Standard inside/outside rose for use with ATH, SPA or RHO levers. Omega inside/outside rose, 03-042 OME Standard inside/outside rose for use with OME levers. Blank outside rose, N523-002 Standard inside/outside rose for use with ATH, SPA or RHO levers. Size: 3M\zn” dia. Size: 3M\zn” dia. Size: 3M\zn” dia. Available in 605, 606,612, 613, 619, 625, 626. Available in 605, 606, 612, 613, 619, 625, 626. Engraved inside rose (Rhodes) XN12-035 Inside rose engraved with “LOCK”. For use with classroom security function locks with ATH, SPA or RHO levers. Engraved inside rose (Omega) XN12-045 Inside rose engraved with “LOCK”. For use with classroom security function locks with OME levers. Size: 3M\zn” dia. Size: 3M\zn” dia. Available in 626 only. Available in 626 only. Cylinders Standard Full size interchangeable cores Conventional Classic or Everest, 23-065 Primus® Controlled Access, 20-765 Primus® High Security, 23-565. UL 437 Listed Indicator, 23-000 Conventional with Logo Classic or Everest, 23-030 Conventional without Logo Classic or Everest, 23-031 Primus® with logo, 20-740 Primus® without Logo, 20-741 Small format interchangeable cores Everest® Combinated, 80-037 Also available in uncombinated (80-036) Best® Keyway 7-Pin Uncombinated, 80-033 Also available in 6-pin uncombinated (80-043) Schlage • ND-Series service manual • 95 Parts and kits Latches All ND-Series latches have one-inch diameter housing and adjustable faceplates for flat or beveled doors. Deadlatch, 13-047 Springlatch, 13-048 Electrified deadlatch, 13-049 Backset Description Springlatch Deadlatch 2C\,” Square corner, 1Z\,” x 2Z\v” — 14-047 Square corner, 1” x 2Z\v” — 14-048 2C\v” Square corner, 1Z\,” x 2Z\v”, standard 13-048 13-047 2C\v” Square corner, electrified latch, 1Z\,” x 2Z\v” — 13-049 2C\v” Anti-friction fire door latch, square corner, 1Z\,” x 2Z\v”, C\v” throw — 14-042 3C\v” Square corner, 1Z\,” x 2Z\v” 14-010 14-028 5” Backset extension link — 43-005** — Rabbeted latch and strike kit, 605, 626 only 39-030* * Adapts square corner latch and 2C\v” high square corner strike to Z\x” rabbeted door and frame preparations. ** Can only be used with 2 ³⁄₄” backset latch. Anti-frIction fire door deadlatch, 14-042 Rabbeted latch and strike kit, 39-030 Spacer for latch Shield for strike Installation tools and kits Boring jigs and tools are designed to provide fast and accurate lock installation. Complete kits or individual tools can be ordered for preparing doors and jambs for Schlage products. Pin wrench N523-108 Old style pin wrench M504-271 Lever Removal Tool 24002693 Installation tool for interchangeable core M504-413 Drill fixture M204-198 For through bolts on AL and ND-Series levers Reinforcement kit 37-001 Reinforcement kit 37-001 is used to reinforce and prevent the collapse of hollow metal doors when locksets are mounted. This kit should be used for installation in hollow metal doors to prevent lateral movement of the latch bolt. Extension link is included for long backset installations. Specify door thIckness 1C\,” or 1C\v” when ordering. Extension Link 43-005* Reinforcement A501-565 - 1C\,” doors* A501-566 - 1C\v” doors* 96 • Schlage • ND-Series service manual Placement of reinforcement in hollow metal door Parts and kits * Parts may be ordered separately. Installation kit 40-147 Installation kit 40-147 for locksets and deadbolts is adjustable for 2C\,” and 2C\v” backsets. Includes a removable bushing adaptor for M\,” latch hole. For door thickness 1C\,” to 2Z\,”. Part no. Description Part no. Description 40-015 M\,” Bit 40-148 Installation Jig * 40-029 Full Lip Strike Chisel 40-175 1” Bit 1Z\,” x 2C\v” Latch Chisel 40-176 2Z\,” Multi Spur Bit 1Z\x” Multi Spur Bit 40-030 40-031 * 1” x 2Z\v” Latch Chisel 40-177 40-032 1Z\,” x 2Z\v” Latch Chisel 40-178 QuIck Change Bit Adapter 40-035 M\,” Strike Locator M504-497 Case * May be ordered separately. Maintenance Kit 40-097 Maintenance kit for ND-Series lever locks contains: plunger sleeves, screw packs in various finishes, slide catches and service parts listed below. Part no. Description Qty Slot no. Part no. Description Qty Slot no. N523-055 Plate, anti-rotation 2 1 24088544 Housing, outside 2 Bottom N523-020 Cylinder 3 2 63-104 Spring cage assembly, dummy 1 Bottom N523-091 Driver, SFIC 5 2 M504-413 Installation tool, IC 1 Bottom N523-127 Driver, IC 5 2 N123-021 Spring cage assy, inside 1 Bottom 23988066 Insert, gauge 10 3 N123-022 Spring cage assy, outside 1 Bottom N523-025 Clip, slide 2 4 N123-032 Spring cage assy, inside 1 Bottom N523-149 Slide 2 4 N123-043 Spring cage assy, outside 1 Bottom D500-000 Spacer, SFIC 5 5 N123-056 Spring cage assy, SFIC, O/S 1 Bottom N523-021 Screw, mounting 4 5 N123-057 Spring cage assy, SFIC, I/S 1 Bottom N523-092 Screw, machine, oval head 4 5 P515-181 Component sheet 1 Bottom C604-187 Catch, slide 2 6 C604-188 Catch, slide 2 6 C604-191 Spring, catch, slide 4 6 C503-019 Slide, spring 8 7 N523-054 Plate, adjustment 2 8 N123-008 Keycam assembly 2 10 N123-009 Keycam assembly 2 11 N123-010 Keycam assembly 2 12 N123-011 Keycam assembly 2 13 N123-012 Keycam assembly 2 13 N123-013 Keycam assembly 2 14 24002693 Tool, trim removal 2 15 N123-028 Plunger assembly 5 16 N123-017 Plunger assembly 3 17 N523-056 Spindle, inside 2 18 N523-013 Spindle, outside 2 19 N523-019 Spindle, outside, electrified 2 20 N123-020 Package, screw 2 21 N123-040 Package, screw 2 22 24085037 Hub, inside 2 23 24085060 Hub, inside 2 24 1 3 4 5 6 7 9 1 8 2 0 11 1 18 2 1 19 3 1 20 4 15 21 22 16 23 17 24 25 Schlage • ND-Series service manual • 97 Parts and kits Strikes Square Corner T-Strike, 10-013 Size: 1Z\,” x 2C\v” x C\cx” Lip length: 1Z\,”, 1Z\x” Includes strike box C603-623 Square Corner Fire Door T-Strike, 10-016 Size: 1Z\,” x 2C\v” x C\cx” Lip length: 1Z\,”, 1Z\x” Includes strike box B502-853 Available in 605, 606,612, 613, 619, 625, 626. Available in 605, 606, 612, 613, 619, 625, 626. ElectrIc Strike, 10-042 Size: 1Z\v” x 4M\,” 24 Volt AC 12 Volt DC Available in 606 and 626 only. 98 • Schlage • ND-Series service manual ANSI Prep. A115.2, 10-025 Size: 1Z\,” x 4M\,” x C\cx” Lip length: 1C\zn” (std), 1C\,” If required, K510-066 strike must be ordered separately. Available in 605, 606, 612, 613, 619, 625, 626. ANSI PlastIc Strike Box, K510-066 Parts and kits Screws, screw packs and special parts Screws ANSI strike screw, C603-256 Part no. Description Door thickness Type Size A501-171 ND170, washer – Washer – N523-092 ND170, mounting screw 1Z\x” - 2” POH Machine Z\v”-20 x 2Z\x” C603-256 ANSI strike screw – PFH Combo 12-24 X 1” C603-897 Latch and strike screw – PFH Combo #8 X C\v” N523-021 Spring cage screws 1C\,” - 2” POH Machine #8 X 32 x 2Z\,” N583-133 ND170, Spring cage screws – PFH Combo #8 X 1” Screw packs, standard Special parts Part no. Description Contents Part no. Description B502-517 Latch and strike screws (4) C603-897 XQ02-309* 10-013 Strike, M\,” flat lip N123-020 Mounting, all except ND170 (4) C603-897 XQ03-494* 10-013 Strike, 1B\,” - 6” lip (2) C603-256 (2) N523-021 Mounting, ND170 1C\,” Chassis spacer, XN12-012** 10-013 Strike, 6Z\,” - 12” lip XQ07-351* (1) M504-271 N123-040 Latch and strike screw, C603-897 10-025 Strike, M\,” flat lip ND40 Emergency key, 35-250 10-025 Strike, lips through 6” (except M\,”, 1C\zn” and 1C\,”) (2) L583-133 XC03-069 Extension links, backsets over 5” - 42” (1) N523-092 XN12-012** Chassis spacer for 1C\,” door (2 required) (1) M504-271 35-250 Emergency Key, ND40 (2) C603-256 35-251 Spanner Key, ND85 (1) A501-171 C203-736 ANSI Strike * Specify lip length ** Specify finish. Screw packs, Torx® Part no. Description Contents C203-311 Latch and strike (includes tool) (4) C503-766 (T-15) C203-312 Latch and ANSI strike (includes tool) (2) C503-766 (T-15) (2) L583-371 (T-20) Schlage • ND-Series service manual • 99 Finishes Finishes Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel, or other materials. require different methods of cleaning and care. For example, non-clear coated finishes should not be cleaned with any soaps or solvents. Organically coated surfaces should periodically be cleaned with a mild non-abrasive soap and be buffed lightly with a clean cloth. The type of base metal and finished techniques must be considered when applying any cleaning or preservative method. Where required, a protective clear coating is applied and cured under high temperature. It is important that the climatic conditions and usage be taken into consideration when selecting finishes. This is especially true in areas subjected to strong corrosive vapors, humid climate, or sea air which, in short time, may have a damaging effect on metal finishes. In some instances for customer convenience, the most appropriate BHMA (Builders Hardware Manufacturers Association) finish symbols are used to indicate similarity of appearance regardless of base metal or finishing process. Finish numbers in the 600-Series are the BHMA industry standard. The nearest former U.S. equivalent code designations are shown in parenthesis. The longevity and preservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organic finishing applications may Finish codes and descriptions Schlage code BHMA Description Schlage code BHMA Description 605 (US 3) Bright brass, clear coated 619 (US 15) Satin nickel, clear coated 606 (US 4) Satin brass, clear coated 625 (US 26) Bright chromium plated, no coating 612 (US 10) Satin bronze, clear coated 626 (US 26D) Satin chromium plated, no coating 613 (US 10B) Oil rubbed bronze, oxidized satin bronze, oil rubbed, no coating Ordering procedures To order Schlage products, descriptive data should be in the same sequence as shown below. Line Item 1 Qty 2 Product 3 Line Item: Qty: Product: Outside Inside DES FIN DES FIN 4 5 6 7 Hand Latch Strike Dr Thk Ext Dim Additional Details 8 9 10 11 12 13 14 Line item number Quantity Complete lock product or part number Outside DES: Outside design code Outside FIN: Outside finish code Inside DES: Inside design code Inside FIN: Inside finish code Hand: Hand of door: Only one hand allowed per line item. Example: RH=right hand, LH=left hand, RR=right reverse, LH=left reverse Latch: Leave blank for standard latch or specify part number if non-standard latch is required Strike: Leave blank for standard strike or specify part number if non-standard latch is required. LLL=less strike Dr Thk: Ext: Dim: Additional Details: Door thickness: Enter door thickness if non-standard, example 138=1C\,”, 214=2Z\v”, 212=2Z\x” (EI or EO assumes the latch will be centered on 1” door, to which material has been added) Extension: Enter one of the following when door 2” thick or greater are specified: EE=extended equally, EI=extended inside, EO=extended outside, ED=extended differently Dimension: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length Enter detail for keying information and for special requirements 100 • Schlage • ND-Series service manual Limited warranty Limited warranty Product warranty: commercial applications Limited warranty Schlage Lock Company, LLC (the “Company”) extends a threeyear limited warranty to the original user of the products manufactured by the Company (the “Products”) against defects in material and workmanship from the date of purchase. Certain Products contain restrictions to this limited warranty, additional warranties or different warranty periods. Please see below for specific Product warranty information. What The Company Will Do: Upon return of the defective Product to the Company or its authorized distributor for inspections, free and clear of all liens and encumbrances and accompanied by the statement of defects of proof of purchase, the Company will replace the Product. Original User: These warranties only apply to the Original User of Products. These warranties are not transferable. What Is Not Covered: The following costs, expenses and damages are not covered by the provisions of these limited warranties: (i) labor costs including, but not limited to, such costs for the removal and reinstallation of Products; (ii) shipping and freight expenses required to return the Products to the Company; or (iii) any other incidental, consequential, indirect, special and/or punitive damages, whether based on contract, warranty, tort (including, but not limited to strict liability or negligence), patent infringement, or otherwise, even if advised of the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. The provisions of this warranty do not apply to Products: (i) used for purposes for which they are not designed or intended; (ii) which have been subjected to alteration, abuse, misuse, negligence or accident; (iii) which have been improperly stored, installed, maintained or operated; (iv) which have been used in violation of written instructions provided by Schlage; (v) which have been subjected to improper temperature, humidity or other environmental conditions (i.e., corrosion); or (vi) which, based on the Company’s examination, do not disclose to the Company’s satisfaction non-conformance to the warranty. Additionally, the Company will not warrant ANSI A156.2 Grade 2 lever Product installed in educational facilities and student housing. Product warranties, additional terms & conditions: commercial and residential applications Additional Terms: The Company does not authorize any person to create for it any obligation or liability in connection with the Products. The Company’s maximum liability under these warranties is limited to the purchase price of the Product. No action arising out of any claimed breach of these warranties by the Company may be brought by the original user more than one (1) year after the cause of action has arisen. How State Law Applies: These warranties give you specific legal rights, and you may also have other rights which vary from state to state. Note: Should the Product be considered a consumer product as may be covered by the Magnusson Moss Federal Warranty Act, please be advised that: (1) Some states do not allow limitations or incidental consequential damages or how long an implied warranty lasts so that the above limitations may not fully apply; and (2) This warranty gives specific legal rights and a user may have other rights which may vary from state to state. For warranty service and shipping instructions, Schlage and Portable Security Commercial customers contact: Schlage, Customer Care 3899 Hancock Expressway Colorado Springs, CO 80911 (877) 671-7011 Fax (800) 452-0665 The Schlage Lock Company reserves the right to make changes in designs and specifications or to make additions or improvements on its products without notice and without incurring any obligation to incorporate them on products previously manufactured. The Schlage Lock Company is not responsible for any modification, addition or alteration to our products by others. Specific product warranty restrictions/additional warranties ND-Series Levers 10-Year Mechanical Warranty: The limited warranty is provided for a period of ten (10) years from the date of purchase and is subject to the restrictions of these limited warranties. Small Format Interchangeable Core (SFIC) Warranty: The limited warranty also applies to Schlage locks and housings when used with another manufacturer’s cores, or to Schlage cores (i.e. SFIC) when used in another manufacturer’s locks and housings. The use of unauthorized cylinder cams or other components with the Products shall void these warranties. Everest® Primus® Limited Lifetime Key Breakage Warranty: A limited lifetime warranty is provided to the original user against breakage and is subject to the restrictions of these limited warranties. Schlage • ND-Series service manual • 101 About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com. © 2015 Allegion 006499 Rev. 01/15 www.allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2015:01:26 15:33:51-07:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2015:01:27 12:52:27-07:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2015:01:27 12:52:27-07:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:7c5570b7-d079-4996-9f37-ea2b8c942734 Original Document ID : xmp.did:5DB1733EC764DE1191669FF64C74280C Document ID : xmp.id:7468D8EBAAA5E411AAB78DFB5DC0B299 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:4E0D56F18FA5E411AAB78DFB5DC0B299 Derived From Document ID : xmp.did:BAE753DEA978E311BA7BB2C36CB44C74 Derived From Original Document ID: xmp.did:5DB1733EC764DE1191669FF64C74280C Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2015:01:26 15:33:51-07:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 101EXIF Metadata provided by EXIF.tools