Schlage A Series Service Manual 106720
User Manual: Schlage Schlage A Series Service Manual Service Manual
Open the PDF directly: View PDF 
.
Page Count: 32
| Download | |
| Open PDF In Browser | View PDF |
A-Series Service manual Contents 5 Introduction 5 Lock Assembly Drawing Index 7 Chassis and Assemblies 8 9 10 11 12 13 14 15 16 17 18 Passage Lock Exit Lock Patio Lock Bath/Bedroom Privacy Lock Communicating Lock Entrance Lock Classroom Lock Communicating Lock Storeroom Lock Faculty/Restroom Lock Dummy Trim 19 Parts and Accessories 20 21 22 23 24 26 28 28 29 29 30 Knob and Lever Designs Latches Strikes Finishes Cylinder Units and Parts Interchangeable Cores, Designs, and Parts Lubrication Installation Tools and Kits Long Backsets Reinforcement Kit Keying Introduction Introduction This manual contains a complete listing of A-Series (Grade 2) cylindrical lock parts and assemblies manufactured by the Schlage Lock Company. This manual lists components of A-Series locks manufactured after 1984. Exploded views of each lock chassis and trim assemblies are provided with an accompanying chart to identify parts for replacement purposes. In addition, this manual provides lock trim ordering procedures, general cylinder information, and all auxiliary components of the A-Series cylindrical locks. Standard Features* Certifications ANSI A156.2, 2003, Series 4000, Grade 2, UL Listed for 3-hour fire door. Latchbolt Z\x” throw, brass, chrome plated, deadlocking on keyed and exterior functions. Strike T-Strike 1Z\,” x 2C\v”, Square corner, box. Backset 2C\,” standard Cylinder 6-Pin solid brass, keyed 6-pin, C123 keyway, keyed different (KD)** Door Range 1C\,” - 1M\,” Keys Two nickel silver cut keys per lock, 6-pin, C123 section** * Locks are furnished with standard features unless otherwise specified. ** Items specified in C keyway will be furnished with cylinder keyed 5-pin and with 5-pin keys unless otherwise specified. Lock Assembly Drawing Index The Lock Assembly Drawing Index provides visual representations and textual descriptions of available functions. Page numbers for full trim and chassis drawings are referenced. Inside Outside Turn/Push-button Thumbturn Deadlatch Blank Plate Key Fixed Knob or Active Knob Springlatch Push-button Schlage • A-Series service manual • 5 Lock Assembly Drawing Index Function SCHLAGE A10S ANSI /BHMA A156.2, 2003, Series 4000, Grade 2 ANSI F75 A25D DESCRIPTION OUTSIDE FUNCTION Passage Latch Both knobs always unlocked. Exit Lock Blank plate outside. INSIDE FUNCTION Chassis and Trim Page 8 Inside knob always unlocked. Specify door thickness, 1C\," or 1C\v". 9 Push-button locking. Turning inside knob or closing door releases button, preventing lock-out. 10 A30D F77 Patio Lock A40S F76 Bath/Bedroom Privacy Lock Can be opened from outside with small screwdriver when locked with inside push-button. Push-button locking. Turning inside knob or closing door releases button. 11 A43D F79 Communicating Lock Turn-button in outside knob locks and unlocks outside knob and inside thumbturn. Inside thumbturn locked and unlocked by outside turn-button. 12 Entrance Lock Can be opened from outside with small screwdriver or emergency release tool. Push-button locks outside lever. Turning inside lever or closing door releases button. Inside lever is always free for immediate egress. 13 Classroom Lock Outside knob locked and unlocked by key. Inside knob is always unlocked. 14 Communicating Lock Locked or unlocked by key from outside. Inside knob is always unlocked. 15 A53PD F109 A70PD F84 A79PD A80PD F86 Storeroom Lock Outside knob is fixed. Entrance by key only. Inside knob is always unlocked. 16 A85PD F93 Faculty/Restroom Lock (with Indicator Cylinder) Outside knob is fixed. Entrance by key only. Push-button in inside knob activates visual occupancy indicator, allowing only emergency master key to operate. Turning inside knob or closing door releases visual occupancy indicator. Rotation of inside spanner-button provides lock-out feature by keeping indicator thrown. 17 Single Dummy Dummy trim for one side of the door. Used fo door pull or as matching inactive trim. A170 Keyed functions available with full size interchangeable core option for Orbit design. 6 • Schlage • A-Series service manual 18 Chassis and Assemblies 8 9 10 11 12 13 14 15 16 17 18 Passage Lock Exit Lock Patio Lock Bath/Bedroom Privacy Lock Communicating Lock Entrance Lock Classroom Lock Communicating Lock Storeroom Lock Faculty/Restroom Lock Dummy Trim Chassis and Assemblies Passage Lock 1 A10S Trim assembly 3 Assembled chassis 19 Chassis assembly 2 36 2 56 3 21 67 54 65 58 2 25 37 24 2 No. Description Part No. 1 Rose, Outside 01-001** 2 Rose, Inside 01-002** 3 Knob/Lever, Closed 01-008** 19 Mounting Plate, Inside A201-377 21 Hub & Cap, Outside A201-406* 24 Spindle & Catch, Inside 1C\, - 1M\," door A301-386 Spindle & Catch, Inside 2 - 2Z\v" door A301-409 Spindle & Catch, Inside 2Z\x" door A301-410 25 Spindle & Catch, Outside A301-387 28 Housing & Cap, 1C\, - 1M\," door A301-403* Housing & Cap, 2 - 2Z\v" door A301-404* Housing & Cap, 2Z\x" door A301-405* Housing Threaded, 1Z\, - 1M\," door A301-406* Screw, Mtg. 1C\, - 1M\," door 66 28 No. Description Part No. 58 Spring, Slide, Knob & Lever A508-605 65 Slide, Non-restoring A590-181 A501-161 66 Cotter Pin C503-008 Screw, Mtg. 2 -2Z\x" door A501-818 67 Plug, Spindle G570-232 37 Plate, Inside A501-305 * Specify finish 54 Plate, Outside A508-399 ** Specify design and finish Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. 36 56 Frame 8 • Schlage • A-Series service manual A508-598 Chassis and Assemblies Exit Lock 22 A25D Trim assembly Assembled chassis 19 2 56 36 Chassis assembly 2 38 3 52 58 2 24 65 37 No. Description Part No. 2 Rose, Inside 01-002** 3 Knob/Lever, Closed 01-008** 19 Mounting Plate, Inside A201-377 22 Rose, Outside A201-558* 24 Spindle & Catch, Inside 1C\, - 1M\," door A301-386 Spindle & Catch, Inside 2 - 2Z\v" door A301-409 Spindle & Catch, Inside 2Z\x" door A301-410 Housing & Cap, 1C\, - 1M\," door A301-403* Housing & Cap, 2 - 2Z\v" door A301-404* Housing & Cap, 2Z\x" door A301-405* Housing Threaded, 1Z\, - 1M\," door A301-406* Screw, Mtg. 1C\, - 1M\," door A501-161 Screw, Mtg. 2 -2Z\x" door A501-818 37 Plate, Inside A501-305 38 Hub, 1C\, - 1Z\x" door A501-498 * Specify finish Hub, 1B\, -1M\," door A501-499 ** Specify design and finish 52 Plate, Outside A501-874 56 Frame A508-598 28 36 28 2 66 No. Description Part No. 65 Slide, Non-restoring A590-181 66 Cotter Pin C503-008 Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Schlage • A-Series service manual • 9 Chassis and Assemblies Patio Lock 3 1 A30D Trim assembly Assembled chassis 56 20 6 19 54 2 25 36 2 Chassis assembly 4 55 58 2 6 26 24 62 37 No. Description Part No. 1 Rose, Outside 01-001** 2 Rose, Inside 01-002** 3 Knob/Lever, Closed 01-008** 4 Knob/Lever, Open 01-009** 6 Plunger & Button, Inside 01-055*** 19 Mounting Plate, Inside A201-377 20 Hub and Cap, Outside A201-399* 22 Rose, Outside A201-558 24 Spindle & Catch, Inside C\, - 1M\," door A301-386 Spindle & Catch, Inside 2 - 2Z\v" door A301-409 Spindle & Catch, Inside 2Z\x" door A301-410 25 Spindle and Catch, Outside A301-403 28 Housing & Cap, 1C\, - 1M\," door A301-403* Housing & Cap, 2 - 2Z\v" door A301-404* Housing & Cap, 2Z\x" door A301-405* Housing Threaded, 1Z\, - 1M\," door A301-406* Plate, Inside A501-305 37 54 Plate, Outside 10 • Schlage • A-Series service manual A508-399 26 2 66 No. Description Part No. 55 Seat Spring, Knob & Lever A508-597 56 Frame A508-598 62 Slide, Restoring A590-158 55 Seat Spring, Knob & Lever A508-597 56 Frame A508-598 62 Slide, Restoring A590-158 * Specify finish ** Specify design and finish *** Specify dimension and finish Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Chassis and Assemblies Bath/Bedroom Privacy Lock 4 8 A40S 1 Assembled chassis Trim assembly 56 21 54 7 25 58 19 2 2 36 2 4 27 7 64 28 37 24 Chassis assembly No. Description Part No. 1 Rose, Outside 01-001** 2 Rose, Inside 01-002** 4 Knob/Lever, Open 01-009** 7 Plunger & Button, Inside 01-056*** 8 Plunger & Button, Outside 01-057*** 19 Mounting Plate, Inside A201-377 21 Hub and Cap, Outside A201-406* Spindle & Catch, Inside 1C\, - 1M\," door A301-386 Spindle & Catch, Inside 2 - 2Z\v" door A301-409 No. Description Part No. Spindle & Catch, Inside 2Z\x" door A301-410 37 Plate, Inside A501-305 54 Plate, Outside A508-399 56 Frame A508-598 58 Spring Slide, Knob & Lever A508-605 64 Slide, Restoring A590-180 66 Cotter Pin C503-008 24 25 Spindle and Catch, Outside A301-403 27 Cam, Outside A301-402 28 Housing & Cap, 1C\, - 1M\," door A301-403* 36 Housing & Cap, 2 - 2Z\v" door A301-404* Housing & Cap, 2Z\x" door A301-405* Housing Threaded, 1Z\, - 1M\," door A301-406* Screw, Mtg. 1C\, - 1M\," door Screw, Mtg. 2 - 2Z\x" door 66 2 * Specify finish ** Specify design and finish A501-161 *** Specify dimension and finish A501-818 Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Schlage • A-Series service manual • 11 Chassis and Assemblies Communicating Lock A43D Trim assembly 4 1 60 2 Assembled chassis 56 23 21 68 54 9 Chassis assembly 59 58 2 41 63 37 57 No. Description Part No. 1 Rose, Outside 01-001** 4 Knob/Lever, Open 01-009** 9 Plunger and Button, Outside 01-058*** 21 Hub and Cap, Outside A201-406* 23 Turn and Plate, Inside A201-688* 37 Plate, Inside A501-305 41 Spindle, Inside, 1C\, - 1M\," door A501-633 Spindle, Inside, 2Z\v" door A500-001 Spindle, Inside, 2Z\x" door A500-002 54 Plate, Outside A508-399 56 Frame A508-598 57 Housing A508-600 58 Spring Slide, Knob & Lever A508-605 59 Stop Slide 12 • Schlage • A-Series service manual A508-641 2 No. 66 Description Part No. Screw, Mtg. 1C\, - 1M\," door A508-649* Screw, Mtg. 2 - 2Z\x" door A508-650* 63 Slide, Non-restoring A590-159 66 Cotter Pin C503-008 68 Tamper Resistant Torx Tool Bit (One per case) M504-426 60 * Specify finish ** Specify design and finish *** Specify dimension and finish Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Chassis and Assemblies Entrance Lock 12 14 A53PD Trim assembly 13 1 Assembled chassis 5 56 10 20 19 36 54 2 2 25 4 55 27 58 2 Chassis assembly 63 10 24 37 No. Description Part No. 1 Rose, Outside 01-001** 2 Rose, Inside 01-002** 4 Knob/Lever, Open 01-009** 5 Knob and Sleeve, Cylinder 01-018** 10 Plunger & Button, Inside 01-060*** 12 Cylinder Knob (less sleeve) 01-080** 13 Sleeve Knob Cylinder 01-081** 14 Cylinder, 6-Pin 21-002** Cylinder, 6-Pin, Orbit 21-002-122** 19 Mounting Plate, Inside A201-377 20 Hub and Cap, Outside A201-399 24 Spindle & Catch, Inside 1C\, - 1M\," door A301-386 Spindle & Catch, Inside 2 - 2Z\v" door A301-409 Spindle & Catch, Inside 2Z\x" door A301-410 25 Spindle and Catch, Outside A301-387 27 Cam, Outside A301-402 28 Housing & Cap, 1C\, - 1M\," door A301-403* Housing & Cap, 2 - 2Z\v" door A301-404* Housing & Cap, 2Z\x" door Housing Threaded, 1Z\, - 1M\," door 28 66 No. Description Part No. 36 Screw, Mtg. 1C\, - 1M\," door A501-161 Screw, Mtg. 2 - 2Z\v" door A501-818 37 Plate, Inside A501-305 2 54 Plate, Outside A508-399 55 Seat Spring, Knob and Lever A508-597 56 Frame A508-598 58 Spring Slide, Knob and Lever A508-605 63 Slide, Non-restoring A590-159 66 Cotter Pin C503-008 * Specify finish ** Specify design and finish A301-405* *** Specify dimension and finish A301-406* Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Schlage • A-Series service manual • 13 Chassis and Assemblies Classroom Lock 12 A70PD 14 Trim assembly 13 1 Assembled chassis 5 56 20 54 19 25 2 43 Chassis assembly 36 2 3 55 58 2 49 No. Description Part No. 1 Rose, Outside 01-001** 2 Rose, Inside 01-002** 3 Knob/Lever, Closed 01-008** 5 Knob and Sleeve, Cylinder 01-018** 12 Cylinder Knob (less sleeve) 01-080** 13 Sleeve Knob Cylinder 01-081** 14 Cylinder, 6-Pin 21-002* Cylinder, 6-Pin, Orbit 21-002-122* 19 Mounting Plate, Inside A201-377 20 Hub and Cap, Outside A201-399* 24 Spindle & Catch, Inside 1C\, - 1M\," door A301-386 Spindle & Catch, Inside 2 - 2Z\v" door A301-409 Spindle & Catch, Inside 2Z\x" door A301-410 25 Spindle and Catch, Outside A301-387 28 Housing & Cap, 1C\, - 1M\," door A301-403* Housing & Cap, 2 - 2Z\v" door A301-404* Housing & Cap, 2Z\x" door A301-405* Housing Threaded, 1Z\, - 1M\," door A301-406 Screw, Mtg. 1C\, - 1M\," door A501-161 Screw, Mtg. 2 - 2Z\v" door A501-818 36 37 Plate, Inside 14 • Schlage • A-Series service manual A501-305 50 24 63 66 2 37 28 No. Description Part No. 43 Plug, Cam A501-721 49 Spiral Cam A501-776 50 Spacer Cam A501-791 54 Plate, Outside A508-399 55 Seat Spring, Knob and Lever A508-597 56 Frame A508-598 58 Spring Slide, Knob and Lever A508-605 63 Slide, Non-restoring A590-159 66 Cotter Pin C503-008 * Specify finish ** Specify design and finish Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Chassis and Assemblies Communicating Lock 12 14 A79PD 13 Trim assembly 1 Assembled chassis 5 56 2 47 20 44 54 45 25 Chassis assembly 55 58 2 43 49 66 2 50 63 46 57 No. Description Part No. 1 Rose, Outside 01-001** 5 Knob and Sleeve, Cylinder 01-018** 12 Cylinder Knob (less sleeve) 01-080** No. Description Part No. 13 Sleeve Knob Cylinder 01-081** 49 Spiral Cam A501-776 14 Cylinder, 6-Pin 21-002* 50 Spacer Cam A501-791 Cylinder, 6-Pin, Orbit 21-002-122* 54 Plate, Outside A508-399 19 Mounting Plate, Inside A201-377 55 Seat Spring, Knob and Lever A508-597 20 Hub and Cap, Outside A201-399* 56 Frame A508-598 25 Spindle and Catch, Outside A301-387 57 Housing A508-600 43 Plug, Cam A501-721 58 Spring Slide, Knob and Lever A508-605 44 Rose, Inside A501-766* 63 Slide, Non-restoring A590-159 45 Plate, Mounting A501-767 66 Cotter Pin C503-008 46 Plate, Inside A501-768 * Specify finish 47 Screw, Mtg. 1C\, - 1M\," door A501-769 ** Specify design and finish Screw, Mtg. 2 - 2Z\v" door A501-770 Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Schlage • A-Series service manual • 15 Chassis and Assemblies Storeroom Lock 12 Trim assembly 14 A80PD 13 1 Assembled chassis 5 19 56 36 20 2 53 25 Chassis assembly 2 18 3 55 40 58 2 24 63 37 No. Description Part No. 1 Rose, Outside 01-001** 2 Rose, Inside 01-002** 3 Knob/Lever, Closed 01-005** 5 Knob and Sleeve, Cylinder 01-018** 12 Cylinder Knob (less sleeve) 01-080** 13 Sleeve Knob Cylinder 01-081** 14 Cylinder, 6-Pin 21-002* Cylinder, 6-Pin, Orbit 21-002-122* 18 Cam A201-370 19 Mounting Plate, Inside A201-377 20 Hub and Cap, Outside A201-399* 24 Spindle and Catch, Inside, 1C\, - 1M\," door A301-386 Spindle and Catch, Inside, 2 - 2Z\v" door A301-409 Spindle and Catch, Inside, 2Z\x" door A301-410 25 Spindle and Catch, Outside A301-387 28 Housing & Cap, 1C\, - 1M\," door A301-403 Housing & Cap, 2 - 2Z\v" door A301-404 28 2 66 No. Description Part No. 36 Screw, Mtg. 1C\, - 1M\," door A501-161 Screw, Mtg. 2 - 2Z\x" door A501-818 37 Plate, Inside A501-305 40 Wedge A501-615 53 Plate, Outside A501-901 55 Seat Spring, Knob and Lever A508-597 56 Frame A508-598 58 Spring Slide, Knob and Lever A508-605 Housing & Cap, 2Z\x" door A301-405 63 Slide, Non-restoring A590-159 Housing, Threaded, 1C\, - 1M\," door A301-406 66 Cotter Pin C503-008 16 • Schlage • A-Series service manual Chassis and Assemblies Faculty/Restroom Lock 12 15 13 A85PD Trim assembly 1 Assembled chassis 5 11 56 19 20 53 2 25 4 40 27 55 58 2 36 2 Chassis assembly 11 24 62 No. Description Part No. 1 Rose, Outside 01-001** 2 Rose, Inside 01-002** 4 Knob/Lever, Open 01-009** 5 Knob and Sleeve, Cylinder 01-018** 11 Plunger and Button, Inside 01-063*** 12 Cylinder Knob (less sleeve) 01-080** 13 Sleeve Knob Cylinder 01-081** 15 Indicator Cylinder 21-003* Indicator Cylinder, Orbit 21-003-168* 19 Mounting Plate, Inside A201-377 20 Hub and Cap, Outside A201-399* 24 Spindle and Catch, Inside, 1C\, - 1M\," door A301-386 Spindle and Catch, Inside, 2 - 2Z\v" door A301-409 Spindle and Catch, Inside, 2Z\x" door A301-410 25 Spindle and Catch, Outside A301-387 27 Cam, Outside A301-402 28 Housing & Cap, 1C\, - 1M\," door A301-403* Housing & Cap, 2 - 2Z\v" door A301-404* Housing & Cap, 2Z\x" door A301-405* Housing, Threaded, 1C\, - 1M\," door A301-406* 36 37 Screw, Mtg. 1C\, - 1M\," door A501-161 Screw, Mtg. 2 - 2Z\x" door A501-818 Plate, Inside A501-305 37 42 28 66 2 No. Description Part No. 40 Wedge A501-615 42 Sleeve, Swivel A501-710 53 Plate, Outside A501-901 55 Seat Spring, Knob and Lever A508-597 56 Frame A508-598 58 Spring Slide, Knob and Lever A508-605 62 Slide, Restoring A590-158 66 Cotter Pin C503-008 * Specify finish ** Specify design and finish *** Specify dimension and finish Notes: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. Faculty/Restroom function locks are funished 0-bitted with two 6-pin key unless otherwise specified. Emergency keys must be ordered separately. Schlage • A-Series service manual • 17 Chassis and Assemblies Dummy Trim A170 3 2 70 69 No. Description Part No. 2 Rose, Inside 01-002** 3 Knob/Lever, Closed 01-005** 69 Non-Threaded Chassis, Less Knob and Rose A201-330 70 Screws, Mtg. C603-897 * Specify finish ** Specify design and finish *** Specify dimension and finish Note: Parts for doors 2 - 2Z\x" thick are for doors extended inside (EI) only. 18 • Schlage • A-Series service manual Parts and Accessories 20 21 22 23 24 26 28 28 29 29 30 Knob and Lever Designs Latches Strikes Finishes Cylinder Units and Parts Interchangeable Cores, Designs, and Parts Lubrication Installation Tools and Kits Long Backsets Reinforcement Kit Keying Parts and Accessories Knob and Lever Designs Wrought brass, bronze or stainless steel. Lever is zinc based, plated to match BHMA symbols. Levon (LEV) Available Finishes: 605, 612, 613, 626 Georgian (GEO) Available Finishes: 605, 606, 609, 610, 625, 626 Plymouth (PLY) Available Finishes: 605, 606, 609, 610611, 612, 613, 616, 625, 626, 629, 630 Tulip (TUL) Available Finishes: 605, 606, 609, 610, 625, 626 20 • Schlage • A-Series service manual Orbit (ORB) Available Finishes: 605, 606, 609, 610, 611, 612, 613, 616, 625, 626 Parts and Accessories Latches All A-Series latches have adjustable brass or bronze faceplates for flat or beveled doors, Z\x" throw standard. Rabbeted Latch and Strike Kit* 39-030 Deadlatch 11-085 Deadlatch 11-088 Deadlatch 11-104 Springlatch 11-068 Springlatch 11-069 Springlatch 11-110 Backset 2 C\," 2 C\v" 3 C\v" * Description Deadlatch Springlatch Housing Diameter Square corner, standard 1" x 2Z\v" 11-085 11-068 M\," Z\v" Radius round corner, 1" x 2Z\v" 11-088 11-069 M\," 1" Circular drive-in (non-UL) 11-104 11-110 1" Square corner, 1" x 2Z\v" 11-091 11-111 M\," Square corner, 1Z\," x 2Z\v" 11-096 11-116 1" Z\v" Radius round corner, 1" x 2Z\v" 11-092 11-112 M\," 1" Circular drive-in (non-UL) 11-105 11-113 1" Square corner, 1Z\," x 2Z\v" 14-010 14-028 1" Rabbeted latch and strike kit 39-030* — This kit adapts square corner latch and 2C\v" high square corner strike to Z\x" rabbeted door and frame preparations. Schlage • A-Series service manual • 21 Parts and Accessories Strikes 10-001 (Standard) Square Corner 10-004 Z\v" Radius Round Corner 10-025 ANSI Prep. A115.2 Size: 1Z\," x 2C\v" x C\cx" Size: 1Z\," x 2C\v" x C\cx" Size: 1Z\v" x 4M\," x C\cx" Lip Length: 1Z\," ISIdi. 1", 1Z\v", 1Z\x", 1C\v", 2" Includes C603-623 strike box Lip Length: 1Z\," Includes C603-623 strike box Lip Length: 1C\zn" (Std.) 1C\," If required, K510-066 strike box must be ordered separately. 10-026 Full Lip, Square Corner 10-042 Electric Strike Size: 1B\," x 2Z\v" x C\zn" 10-027 Full Lip, Z\v" Radius Round Corner, No Box Lip Length: 1Z\," Size: 1Z\," x 2C\v" x C\cx" Lip Length: 1Z\," 10-058 Circular Adjustable Size: 1C\v" diameter Lip Length: 1M\cx" Optional tamper resistant torx screw packs Part No. Description C203-311 (4) Latch and Strike Screws, #8-32 x Z\x" (T-15) C203-312 (2) Latch Screws, #8-32 x Z\x" (T-15) (2) ANSI Strike Screws, #12-24 x Z\x" (T-20) Torx tools Part No. Description M504-425 T-15 Torx Tool M504-426 T-20 Torx Tool 22 • Schlage • A-Series service manual Size: 1Z\v" x 4M\," x C\cx" Voltage: 24 VAC, 12 VDC Not designed for continuous duty and electrical locking. 606, 626 only Parts and Accessories Finishes Schlage Lock finishes are durable, top quality finishes obtained by the careful processing of solid brass, bronze, stainless steel, or other materials. When required, a protective clear coating is applied and cured under high temperature. It is important that climatic conditions and usage be taken under consideration when selecting finishes. This is especially true in areas subjected to strong corrosive vapors, humid climate, or sea air, which, in a short time, may have a damaging effect on metal finishes. The longevity and preservation of the finish appearance is determined by base metal and finishing process. Clear protective coating or other organic finishing applications may require different methods of cleaning and care. As an example, non-clear coated finishes should not be cleaned with soaps or any solvents; organically coated surfaces should periodically be cleaned with a mild non-abrasive soap and buffed lightly with a clean cloth. The type of base metal and finishing techniques must be considered when applying any cleaning or preservative method. Contact the Schlage Technical Services Department for further information on the care of finished hardware. In some instances, for customer convenience, the most appropriate BHMA (Builders Hardware Manufacturers Association) finish symbols are used to indicate similarity of appearance regardless of base metal or finishing process. A-Series levers are zinc based material and are plated to match finishes indicated. Finish numbers in the 600-Series are the BHMA industry standard. The nearest old U.S. equivalent code designations are shown in parentheses ( ). Code Description 605 US (3) Bright Brass, Clear Coated 606 US (4) Satin Brass, Clear Coated 609 US (5) Satin Brass, Blackened Satin Relieved, Clear Coated 610 US (7) Bright Brass, Blackened Bright, Relieved, Clear Coated 611 US (9) Bright Bronze 612 US (10) Satin Bronze, Clear Coated 613 US (108) Oil Rubbed Bronze, Oxidized Satin, Bronze, Oil Rubbed, No Coating 616 US (11) Antique Bronze 625 US (26) Bright Chromium Plated, No Coating 626 US (260) Satin Chromium Plated, No Coating 630 US (320) Satin Stainless Steel, No Coating Schlage • A-Series service manual • 23 Parts and Accessories Cylinder Units and Parts Schlage locks are provided with cylinder units precision built to extremely close tolerances and the highest standards of accuracy. Phosphor bronze springs, nickel silver keys, and pins are used throughout the Schlage offering. The best combination of materials is used to ensure the manufacture of cylinders with ease of operation and long wear. To order locks less cylinder units, change product suffix letter "P" and "L". Example: A53LD. Primus® cylinders are available when key control and physical security are important concerns. Cylinder Units Standard Cylinders Primus Cylinders Descriptions Design High Security Controlled Access XP 21-002 20-524 20-724 20-524-XP 20-724-XP 6 Pin unit All except ORB, COM, PLA 21-002-122 20-524-122 20-724-122 20-524-122-XP 20-724-122-XP 6 Pin unit (except A73 & A85) ORB, COM, PLA 21-002-149 20-524-149 20-724-149 20-524-149-XP 20-274-149-XP 6 Pin unit (A73) ORB, COM, PLA 21-003 Not Available 6 Pin Indicator unit (A83) All except ORB, COM, PLA 6 Pin indicator unit (A83) ORB, COM, PLA 21-003-168 21-002 Standard Cylinder 21-003 Hotel Function Indicator Cylinder 20-524 Primus High Security U.L. 437 Listed 20-724 Primus Controlled Access 20-524-XP Hotel Function Indicator Cylinder 20-724-XP Standard Cylinder Hotel Function Indicator Cylinder Important: Use only graphite or similar material for cylinder lubrication. Under no circumstances should any other type of material be introduced into the cylinder. Hotel Function Indicator Cylinder w/ ORB Knob Spacer 24 • Schlage • A-Series service manual Parts and Accessories Cylinder Parts Letter Part no. Description A 33-230 Cylinder plug, 6 pin for 21-002 B 33-235 Cylinder plug, indicator, 6 pin for 21-003 C 34-101 thru 103 #1 thru #3 Top pin D 34-202 thru 209 #2 thru #9 Master pin E 34-300 thru 309 #0 thru #9 Bottom pin F A201-698 Body, 6 pin G A201-934 Bar & driver for 21-002-149 A301-337 Bar & driver for 20-724, 20-724-XP, 20-524, 20-524-XP A301-338 Bar & driver for 21-002-122 A301-339 Bar & driver A73 Orbit A508-606 Bar & driver for 21-001, IDisc.1, & 21-002 A508-614 Bar & driver for 21-002-122 A501-693 Bar for 21-003-168 A501-991 Bar for 21-003 I A508-640 Spacer for ORB knob J C503-113 Tumbler spring K C503-115 Retainer cap spring L C503-116 Retainer cap pin M C503-118 Retainer cap N C503-767 Driver for 21-003 O C603-195 Obstruction pin for 21-003 C604-362 Obstruction pin, Everest C604-144 Indicator pin spring for 21-003 H P C604-369 Indicator pin spring, Everest Q C604-368 Indicator pin, Everest S C604-371 Indicator pin for 21-003 T XA10-594 5 Pin cylinder extension to fit 6 pin knobs (Requires A508-614 bar & driver) Standard Cylinder 5 Pin Cylinder to 6 Pin Knob Conversion Parts Standard Cylinder w/ ORB Knob Spacer Schlage • A-Series service manual • 25 Parts and Accessories Interchangeable Cores, Designs, and Parts Available for all A-Series keyed functions, except Hotel/Motel function A85, as complete locks or in retrofit kits. Existing installations can be retrofitted without removing lock from door. To order locks with interchangeable cores, change product suffix letter "P" to "R". Example: A53RD. To order locks less interchangeable cores, change product suffix letter "P" to "J". Example: A53JD. Primus® cores are available when key control and physical security are important concerns. Interchangeable Cores 23-030 Interchangeable Core w/ Logo 23-031 Interchangeable Core w/o Logo 20-740 Primus Interchangeable Core w/ Logo, Controlled Access 20-741 Primus Interchangeable Core w/o Logo, Controlled Access 20-524-XP Everest Primus Interchageable Core, UL 20-724-XP Everest Primus Interchageable Core w/o Logo Interchangeable Core Designs Orbit Interchangeable Core Accessory and Service Parts Part no. Description 01-026 Knob only 01-053 Driver and retainer 01-054 Knob, core, driver, and retainer 20-524-122-XP Everest Primus Interchangeable Core, UL 20-724-122-XP Everest Primus Interchangeable Core w/o Logo 20-740 Primus interchangeable core w/ logo 20-741 Primus interchangeable core w/o logo 23-030 Interchangeable core w/ logo 23-031 Interchangeable core w/o logo A501-941 Retainer C604-307 Driver M504-413 Installation tool 26 • Schlage • A-Series service manual 01-054 Retrofit Kit M504-413 Installation Tool Order as needed per project Parts and Accessories Interchangeable Core To remove interchangeable core, insert control key and turn 15° to the right until action stops. Pulling on key will extract core from the knob. To install a new core, insert control key and push core into housing, rotate key 15° to the right and insert core completely. Rotate key back to original position and remove control key. X D J Y V C E K M W U S T Interchangeable Core Parts * Letter Part no. Description Letter Part no. Description C 34-101 thru 103 #1 thru #3 Top Pin T 35-056 Control key, blank D 34-202 thru 209 #2 thru #9 Master Pin 48-056 Control key, cut E 34-300 thru 309 #0 thru #9 Bottom pin B220-282 Interchangeable core body, w/ logo J C503-113 Tumbler spring B220-283 Interchangeable core body, w/o logo K C503-115 Retainer cap spring V C603-347 Retainer cap pin M C503-118 Retainer cap W* C603-956 Actuating ring S* 33-235 Plug, Everest interchangeable core X* C603-964 Actuating pin Y* C603-967 Control pin U* Parts not compatible with cores manufactured before 1991. Important: Use only graphite or similar material for cylinder lubrication. Under no circumstance should any other type of material be introduced into the cylinder. Schlage • A-Series service manual • 27 Parts and Accessories Lubrication A-Series lock mechanisms are designed for durability and seldom need servicing. During assembly, those points of contact which require lubrication for ease of operation are given on application of high quality petroleum based grease. A touch of graphite is applied to the pin tumbler plug during assembly of the cylinder unit. No further servicing should be required for an extended period except where locks are subjected to extremely heavy traffic. Also, if located in particularly dusty or dirty areas, the grease may become contaminated resulting in a slow or otherwise unsatisfactory operation. The case mechanism should then be cleaned in a non-corrosive petroleum solvent and relubricated. Graphite only should be applied to the cylinder unit by blowing a small quantity into the keyway. ÎÎ Note: Precautionary measures according to solvent manufacturers instructions should always be followed. Installation Tools and Kits Boring jig and tools are designed to provide fast and accurate lock installation. Complete kit contained in a heavy gage metal box, or individual tools can be ordered for preparing doors and jambs for Schlage products. 40-147 Installation Kit For A, AL, B, D, F, H, and S200-series locks. Adjustable for 2 C\," and 2 C\v" backsets. Designed for special high speed hexagonal shank boring bits and equipped with an adaptor to form an integrated unit for boring doors 1B\zn" to 1ZB\zn" thick. Part No. Description 40-148 Installation JIG M504-497 Case Only 40-176 2 Z\," Multi Spur Bit 40-177 1 Z\x" Multi Spur Kit 40-030 1 Z\," x 2 C\v" Strike Chisel 40-032 1 Z\," x 2 Z\v" Latch Chisel 40-175 1" Bit 40-178 Quick Change Bit Adapter 40-179 1" Strike Locator 40-029 Full Lip Strike Chisel 40-031 1 Z\," x 2 Z\v" Latch Chisel 28 • Schlage • A-Series service manual M504-271 Pin Wrench For depressing knob catches on A and D-Series locks. Parts and Accessories Long Backsets Backsets 5" and over require extension links. A-Series locks with long backsets are normally furnished with 1" faceplates and M\," housings. Links installed in 1" latch holes require one G506-815 sleeve (order separately) to join latch and link. 41-005 5" Extension Link Extension Link 2 ³⁄₈” Backset Latch G506-815 Sleeve Reinforcement Kit The Schlage 37-001 reinforcement kit is to reinforce and help prevent the collapse of hollow metal doors when locksets are tightly mounted. This kit should be used with long backsets for installations in hollow metal doors to prevent lateral movement of latch bolt. Specify door thickness 1C\," or 1C\v" when ordering. 37-001 Reinforcement Kit Reinforcement A501-565 - 1 ³⁄₈” doors A501-566 - 1 ³⁄₄” doors Sleeve A501-567 Placement of reinforcements in hollow metal door. Schlage • A-Series service manual • 29 Parts and Accessories Keying The Schlage Masterkey Department determines and makes the final decision in the selection and use of key sections. Other keyways than shown below are available. Allocation of other keyways is based on need and extent of the final system. Priority is given to key systems that require a large number of cylinders and families of key sections to satisfy their keying requirements. Contact your Schlage representative for availability of other keyways. Key Array Chart Order the Schlage key gage to accurately measure the depth of key cuts. Key Gage 40-104 Cylinder Body Loading Tool A compact precision tool for loading top pins and springs and for installation of ward rings into grooves of a worded cylinder plug. Furnished with complete assembly instructions. Cylinder Body Loading Tool 40-116 Pin Tumbler Keys All Schlage locks come with two nickel silver keys as standard, embossed with our company logo. The nickel silver alloy from which all Schlage keys are made provides the base for accuracy in cutting and long cylinder wear. Schlage will stamp "DO NOT DUPLICATE" across the bow of all versions of its keys at no extra charge when specified on orders. Embossed 35-009 Embossed* 35-002 Unembossed* 35-015 Embossed Control 35-003 Hotel Function Control* 35-016 Emergency, Blank* 35-007 Emergency Key A40 Function 35-250 Spanner Key A85 Function 35-251 * stamped with "Do Not Duplicate" 30 • Schlage • A-Series service manual About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world. Allegion comprises 23 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. For more, visit www.allegion.com. © 2015 Allegion 006720, Rev. 02/15 www.allegion.com/us
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.5-c021 79.153613, 2013/07/11-05:21:54 Format : application/pdf Subject : null, Mechanical Locks; Parts Manual Description : Mechanical Locks; Parts Manual Modified : 2016:01:04 18:26:46Z Title : Schlage A Series Service Manual Size : 3559608 Extracted : 2016:12:07 00:21:45Z Sha 1 : b68ba02d0e6211e7ac1cf6145337337712ab755b Modify Date : 2015:02:06 22:06:04Z Create Date : 2015:02:06 22:05:52Z Metadata Date : 2015:02:06 22:06:04Z Creator Tool : Adobe InDesign CS6 (Windows) Rendition Class : proof:pdf Document ID : xmp.id:240C90434CAEE4118781DD6C58CBCCE0 Original Document ID : xmp.did:5DB1733EC764DE1191669FF64C74280C Instance ID : uuid:37d9e7be-1db9-4629-9bbf-91741ccd506a Derived From Rendition Class : default Derived From Instance ID : xmp.iid:C21704F74AAEE4118781DD6C58CBCCE0 Derived From Document ID : xmp.did:899F292D9CBEE311A3C5DD2BB1AD47C1 Derived From Original Document ID: xmp.did:5DB1733EC764DE1191669FF64C74280C History Action : converted History Software Agent : Adobe InDesign CS6 (Windows) History Parameters : from application/x-indesign to application/pdf History When : 2015:02:06 22:05:52.000Z History Changed : / Producer : Adobe PDF Library 10.0.1 Trapped : False Page Layout : TwoPageRight Page Count : 32 Creator : Adobe InDesign CS6 (Windows) Keywords : null;, null;, "Mechanical, Locks;, Parts, Manual"EXIF Metadata provided by EXIF.tools