Schneider Electric Solar Inverters USA FXRP-BT Remote Panel User Manual 15 Freedom X Remote Panel 808 0817 UserMan
Schneider Electric Solar Inverters USA, Inc. Remote Panel 15 Freedom X Remote Panel 808 0817 UserMan
15_Freedom X Remote Panel (808-0817) UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3685053 |
| Application ID | E3rtwQCI2qKUNZnIYFuDMw== |
| Document Description | 15_Freedom X Remote Panel (808-0817) UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 34.05kB (425680 bits) |
| Date Submitted | 2017-12-20 00:00:00 |
| Date Available | 2017-12-20 00:00:00 |
| Creation Date | 2017-12-06 17:43:30 |
| Producing Software | Adobe PDF library 15.00 |
| Document Lastmod | 2017-12-06 17:48:06 |
| Document Title | Freedom X Remote Panel User Guide(976-0367-01-01_Rev-C)_ENG_For_Regulatory-4-final-2 |
| Document Creator | Adobe Illustrator CC 2015 (Windows) |
Freedom X Remote Panel PN: 808-0817 / 808-0817-01 User Guide http://www.xantrex.com Introduction What’s Required Thank you for purchasing the Freedom X Remote Panel. This user guide will help you install and use the remote panel to operate and configure the Freedom X and XC series remotely. What’s In The Box Check that you have the following items in the box before proceeding. - the Freedom X remote panel unit - user guide and mounting template - 25-ft. 6-conductor com cable kit (808-0817-01 unit only) HAZARD OF FIRE, ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH This Freedom X Remote Panel User Guide is in addition to, and incorporates by reference, the relevant product manuals for each product in the Freedom X series. Before reviewing this guide you must read the relevant product manuals. Unless specified, information on safety, specifications, installation, and operation is as shown in the primary documentation received with the product. Ensure you are familiar with that information before proceeding. Failure to follow these instructions will result in death or serious injury. Exclusion for Documentation UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER (A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER DOCUMENTATION; (B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL, WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK; AND (C) REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT HTTP://WWW.XANTREX.COM. FCC Information to the User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment to a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure: The equipment has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction. FCC ID: 2AODL-FXRP-BT IC: 23407-FXRP-BT If you received the 808-0817 unit, you need to acquire the following 6-conductor cable kit from Xantrex. Go to http://www.xantrex.com/power-products-support to order. • 25-ft. 6-conductor com cable kit (PN: 31-6257-00) • 50-ft. 6-conductor com cable kit (PN: 31-6262-00) Installation 1. Prepare the remote panel unit and the 6-conductor com cable kit. 2. Choose a location for the remote panel unit within reach of the com cable and the inverter unit. 3. Use the mounting template (in section A) to make the installation of the remote panel easier. 4. Mount the remote panel unit. 5. If you have a Freedom 458 unit, you may use it with the Freedom X Remote Panel. Installation instructions are available in section B. Features Status LED indicators LCD screen INPUTBATTTEMP AC OUTPUTBATTLOAD kW VA %C Hz ERROR Status LED Indicators Function buttons ESC button kW VA Hz BYPASS OVERLOAD solid green Scroll button 100% 25% CHARGING OK button solid green Power button Function Buttons return to default screen or exit setting mode AC input and output indicator. AC ERROR Indicates a warning condition and is accompanied by an error code and a sounding alarm. flashing red Copyright © 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. The wrench icon underneath a number is displayed during configuration mode. An error event with its corresponding number is displayed here. A warning event with its corresponding number is displayed here. The battery icon indicates remaining battery power. One bar = 1-25%, two bars = 25-50%, three bars = 50-75%, and four bars = 75-100%. solid red to enter the setting mode or to confirm the setting 976-0367-01-01 Rev C 12-2017 Indicates battery mode (inverter mode) in which the inverter is running and supplying power to the loads from the battery. Indicates error or fault mode and is accompanied by an error code displayed on the LCD screen. next screen or next selection turns the inverter unit on or off NOTE: Only when the inverter’s Power button is off Indicates grid mode in which shore power is available and passing through to the loads and charging the battery. LCD Screen OVERLOAD Shows an AC output overload condition. The load icon is displayed if there is voltage available at the AC output. page 1 Freedom X Remote Panel PN: 808-0817 / 808-0817-01 User Guide http://www.xantrex.com Viewing Information During Battery Mode The bar represents load consumption levels. 100% is an indication of full capacity and 25% indicates low consumption. All the bars disappear at < 20 watts, and AC load indicates zero watt power. 100% 25% Press scroll [ INPUTBATTTEMP OUTPUTBATTLOAD VA Shows up in grid mode when AC shore power is present. If the power is being qualified, then this icon will flash. ] to return to the home screen 1 . INPUTBATTTEMP kW AC VA OUTPUTBATTLOAD INPUTBATTTEMP AC Hz Shows that the unit is in grid mode and is bypassing shore power directly to the loads. BYPASS ] to move to the next screen. Press [ 100% 25% 25% 25% output voltage = 120V, output frequency= 60Hz input voltage = 120V, input frequency = 60Hz This icon shows when there is power conversion from DC to AC - inverting. OUTPUTBATT BATTTEMP The alarm buzzer is muted. For more information, see Freedom inverter’s Owner’s Guide. OUTPUTBATT 100% 100% 25% 25% Inverter firmware version = U1 1.01 NOTE: Screen 3 appears only when AC qualification is pending. Remote panel firmware version = U2 1.10 Viewing Information During Grid Mode Adjusting Feature Settings ] to move to the next screen. Press [ AC BYPASS 1. Press and hold the [ ] button for three seconds to enter the feature settings mode. ] to return to the home screen 1 . INPUT INPUT LOAD AC BYPASS 100% LOAD 25% 100% 25% 25% CHARGING battery voltage = 12.5V, charging = no charging input current = 15.6A, load current = 6.8A Hz BYPASS 100% CHARGING CHARGING input voltage = 120V, input frequency = 60Hz BYPASS CHARGING Inverter firmware version = U1 1.01 976-0367-01-01 Rev C 12-2017 2. Press the scroll [ ] button to move through the different feature settings. BYPASS 100% 100% 25% 25% NOTE: See the Freedom X / XC Owner’s Guide for information on the individual settings. 3. Press the [ ] button to select a setting number and change its value. 4. Press the scroll [ ] button to change the value until you reach the desired value. 5. Press the [ Hz 100% battery voltage = 12.5V, AC load = 1.2kW BATTTEMP BATT 100% This icon shows when there is power conversion from AC to DC - charging. Applicable only to Freedom XC units. Press scroll [ OUTPUTBATTLOAD ] button to confirm the change. 6. Repeat previous steps to set other feature settings. NOTE: Screen 2 appears only in Freedom XC units. Greyed out icons also appear only in Freedom XC units. CHARGING Remote panel firmware version = U2 1.10 Copyright © 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. 7. Press [ ] to exit the feature NOTE: It may take a minute for the settings to take effect on the settings mode. inverter unit. Contact Information http://www.xantrex.com Please contact your Xantrex Sales Representative or visit the Xantrex website at: http://www.xantrex.com/power-products-support/ page 2 Freedom X Remote Panel PN: 808-0817 / 808-0817-01 User Guide http://www.xantrex.com Creating a Bluetooth Link with the Freedom X Remote Panel App The Freedom X Remote Panel app allows you to conveniently monitor and configure a Freedom X inverter (or a Freedom XC inverter/charger) with a compatible smartphone or tablet using a Bluetooth connection. 4. Switch to the Freedom X Remote Panel app. It should now display inverter system status to monitor/configure the Freedom X/XC inverter unit (manufactured after Jan 2018). 1. Download and install the Freedom X Remote Panel app into a compatible smartphone (or tablet). 5. To stop the remote control features, turn OFF the unit using the Freedom X Remote Panel ON/OFF button and close the Freedom X Remote Panel app. 2. Ensure that the Freedom X Remote Panel (manufactured after Jan 2018) is switched ON using the ON/OFF button on its front panel. The Freedom X Remote Panel Bluetooth signal should now be detectable. 3. Turn on your smartphone or tablet. Go to Settings > Bluetooth to scan for Bluetooth devices. 4. Search for FXRP and select it. Wait for a connection to be established. Installing the Remote Panel Unit on the Wall Mounting Template 1. Place the template on the wall. 38.0 mm 2. Mark the corners (or trace the dotted lines) of the recess outline on the wall. 3. Mark the two mounting holes for the two screws on the wall. mounting hole mounting hole 107.0 mm 51.0 mm 4. Remove the template from the wall. 5. Cut along the recess outline on the wall to make a hole for the remote panel’s body. 6. Pre-drill the mounting holes appropriate to the mounting screws (not provided) that will be used. 7. Connect the 6-conductor com cable to the RJ12 ports on the inverter and remote panel. recess outline 126.0 mm NOTE: Ensure the inside wall is free of obstructions, such as pipes, insulation, and electrical wiring. Ensure the recess depth is more than 50 mm. 8. Mount the remote panel unit on the wall. 976-0367-01-01 Rev C 12-2017 allow enough space for connecting the com cable plug Copyright © 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. page 3 Freedom X Remote Panel PN: 808-0817 / 808-0817-01 User Guide http://www.xantrex.com Installing the Freedom X Remote Panel with a Wall Mount Adaptor The Freedom X Remote Panel Wall Mount Adaptor (PN: 808-0819) allows the installation of the Freedom X Remote Panel onto an adaptor bezel which then fits over the existing wall panel opening of a Freedom 458 Basic Remote Panel. 1. Unmount the Freedom 458 Basic Remote Panel from the wall by removing the four screws securing it to the wall. Set aside the four screws. wall space Freedom 458 Basic Remote Panel 2. Detach the six-conductor telephone cable from the Freedom 458 Basic Remote Panel. 4. Take the Freedom X Remote Panel and attach the six-conductor telephone cable from the wall opening. 3. Install the Freedom X Remote Panel Wall Adaptor to the wall at the outer corners with the four screws in step 1. Alternatively, use optional counter-sink screws, if needed. 5. Mount the Freedom X Remote Panel to the Freedom X Remote Panel Wall Adaptor securing it with the two supplied mounting screws. Freedom X Remote Panel Wall Mount Adaptor Freedom X Remote Panel 6. Complete the inverter installation and start up procedure in the Freedom X/XC Owner’s Guide. wall space telephone cable telephone cable 976-0367-01-01 Rev C 12-2017 Copyright © 2017 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. page 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2017:12:06 17:43:30-07:00 Creator : Adobe Illustrator CC 2015 (Windows) Modify Date : 2017:12:06 17:48:06-08:00 XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Format : application/pdf Title : Freedom X Remote Panel User Guide(976-0367-01-01_Rev-C)_ENG_For_Regulatory-4-final-2 Metadata Date : 2017:12:06 17:48:06-08:00 Creator Tool : Adobe Illustrator CC 2015 (Windows) Thumbnail Width : 176 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13806 bytes, use -b option to extract) Instance ID : uuid:cb73d5e0-b25f-4f33-a5c1-1c784cc5f5a2 Document ID : xmp.did:51e8caeb-631d-de40-b333-0bea69042f28 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:3e278305-de07-4813-82a7-6e5fd2bfa394 Derived From Document ID : xmp.did:a37073a4-a1ce-254c-be30-41d5b0a45762 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:a37073a4-a1ce-254c-be30-41d5b0a45762, xmp.iid:51e8caeb-631d-de40-b333-0bea69042f28 History When : 2017:03:30 14:30:25-07:00, 2017:12:06 17:43:24-08:00 History Software Agent : Adobe Illustrator CC 2015 (Windows), Adobe Illustrator CC 2015 (Windows) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 419.999583 Max Page Size H : 297.000083 Max Page Size Unit : Millimeters Font Name : 7-Segment, ArialNarrow, ArialNarrow-Bold, ArialMT, Arial-BoldMT, ArialRoundedMTBold, MyriadPro-Regular, SEOptimist Font Family : 7 Segment, Arial, Arial, Arial, Arial, Arial Rounded MT Bold, Myriad Pro, SEOptimist Font Face : Regular, Narrow, Narrow Bold, Regular, Bold, Regular, Regular, Regular Font Type : TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : 1.01; January 1, 2002, Version 2.40, Version 2.40, Version 5.06, Version 5.06, Version 1.51, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 28.001 Font Composite : False, False, False, False, False, False, False, False Font File Name : 7 Segment.ttf, ARIALN.TTF, ARIALNB.TTF, arial.ttf, arialbd.ttf, ARLRDBD.TTF, MyriadPro-Regular.otf, SEOptimist.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 1655 C, PANTONE Cool Gray 11 C Swatch Group Name : Default Swatch Group, Grays, Brights Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 1655 C, PANTONE Cool Gray 11 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100 Swatch Colorant Tint : 100.000000, 100.000000 Swatch Colorant L : 60.000000, 36.470589 Swatch Colorant A : 67, 0 Swatch Colorant B : 72, -3 Producer : Adobe PDF library 15.00 Page Count : 4EXIF Metadata provided by EXIF.tools