Schneider Electric Modbus Plus Network Bridge Multiplexer Users Manual

2015-02-06

• Table of Contents
• Introducing the BM85 Bridge/Multiplexers
  • Bridge/Multiplexers on Modbus Plus
  • Overview of BM85 Models
  • Programmable Port Models
  • Configuring the Programmable Models
  • Modbus Port Models
  • Specifications (AC/DC Power Models)
  • Specifications (DC/DC Power Models)
• Device Addressing and Message Routing
  • Modbus Plus Message Routing Paths
  • Modbus Address Conversion
  • Routing Examples
• Configuring the Modbus Models
  • Before You Start
  • Required Equipment
  • Configuration Checklist
  • Modbus Port Parameters
  • Configuring the Modbus Ports
  • Your Configuration Commands
  • Your Configuration Screens
  • Your V1 Screen
  • Your V2 and V3 Screens
  • Your V4 Screen
  • Setting the Modbus Plus Address
  • Setting the RUN Mode
  • Modbus Port Indicator Codes
• Configuring the Programmable Models
  • Before You Start
  • Required Equipment
  • Overview of the Development Software
  • Installing the Development Software
  • Preparing the BM85 for Downloading
  • Setting the Configuration Switches
  • Setting the Modbus Plus Address
  • Indicator Codes During Downloading
  • Setting the RUN Mode
• Installing the BM85
  • Installing the BM85 Hardware
  • Connecting the Power Cables
  • Connecting the Network and Serial Cables
  • Reading the Indicators
  • Attaching Identification Labels
• Compatible Devices and Cables
  • Compatible Devices and Cables
  • Modbus/RS232 Cable Wiring Diagrams
  • Modbus/RS232 Ports Pinout
  • RS485 Ports Pinout
• Glossary
• Index