Seav s r l BESMARTNEW Remote control transmitter User Manual Tx BeSmart New GB

Download:
Mirror Download [FCC.gov]
Document ID	2034568
Application ID	yyZJ5vauosospCpDKP73/A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.99kB (49862 bits)
Date Submitted	2013-08-06 00:00:00
Date Available	2013-08-06 00:00:00
Creation Date	2013-07-03 17:11:06
Producing Software	Bullzip PDF Printer / www.bullzip.com / Freeware Edition
Document Lastmod	2013-07-03 17:11:06
Document Title	Microsoft Word - Tx BeSmart New GB.doc
Document Author:	ClaudiaD

BESMART NEW RADIO
GB
CONTROL
Radio control with Random 18-bit transmission
codes and the ability to copy existing codes from
other radio controls in the same series. It may be
used in conjunction with other transmitters in the
same series and integrates perfectly with all
SEAV receivers and electronic control units.
- Mod. BeSmart S2:
- Mod. BeSmart S4:
two channels 433.92MHz
four channels 433.92 MHz
TECHNICAL DATA
- Alkaline battery powered
- Operating frequency
- Combinations
- Max. consumption
- Operating temperature
- Dimensions
: 12V mod.23A
: 433.92 MHz
: 262144
: 25 mA
: -20 to +55 °C
: 75x38x15 mm.
To copy all the information between radio
controls, proceed as follows: remove the cover on
the back of the transmitter to provide access to
the relevant connector. connect the two radio
controls with the cable supplied as “optional”
(programming cable CP2195), press any button
on the control supplying information and hold it
for 4 seconds. The LED on the control receiving
the information will flash 3 times to indicate that
the operation is complete.
WARNING! The default configuration of the radio
control has no password protection, it is therefore
possible to copy all information. In cases where
the control is supplied with an active password it
will not be possible to carry out the copying
process.
Other functions using a PC:
The radio control can be connected to a Personal
Computer using the “SW 2188” software package
which is supplied as optional and enables you to
utilise further functions.
Other functions using a Programmer:
The radio control can be connected to a “PGM
2191” portable Programmer which is supplied as
optional and enables you to utilise further
functions.
WARNING
OPERATING DESCRIPTION
Depending on the model, the radio control is
equipped with 2 or 4 buttons that are used to
control 2 or 4 different functions.
− The battery should be replaced every year to
guarantee the optimal transmitter range.
− To replace an exhausted battery, remove the
plastic cover on the back of the radio control, take
the battery out and replace it with a new one,
observing the correct battery polarities.
− The used battery must be disposed of correctly
in an appropriate recycling bin.
INITIAL OPERATING CONDITION
The radio control is supplied with default random
codes.
OPERATION
Creating a new random code (Reset):
The radio control is supplied with default random
codes. If you want to create a new set of random
codes, follow the RESET process: press the two
buttons (the top and bottom buttons on the 4channel model and the only two buttons on the 2channel model) simultaneously and hold them for
10 seconds. After the LED lights up, press the
same two buttons within 3 seconds. The LED will
flash 3 times to indicate that the process is
complete.
WARNING! The RESET process completely
deletes the default codes.
The product below
BeSmart New Radio control
complies with the requirements of Directive
R&TTE 99/5/EC.
FCC ID: QUS-BESMARTNEW
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Copying all the information in the radio
control:
It is only possible to copy all the transmission
codes to the radio control from other devices if
they are the same model.
Rev. 1.0 03/07/13
WARNING
Any adjustments or modifications that have
been expressly approved by the holder of
legal conformity certificate may invalidate
user’s rights relating to the operation of
device.
not
the
the
the
Rev. 1.0 03/07/13

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 485f3702-e64e-11e2-0000-9699e81f2aa2
Producer                        : \376\377\000B\000u\000l\000l\000z\000i\000p\000 \000P\000D\000F\000 \000P\000r\000i\000n\000t\000e\000r\000 \000/\000 \000w\000w\000w\000.\000b\000u\000l\000l\000z\000i\000p\000.\000c\000o\000m\000 \000/\000 \000F\000r\000e\000e\000w\000a\000r\000e\000 \000E\000d\000i\000t\000i\000o\000n
Modify Date                     : 2013:07:03 17:11:06+02:00
Create Date                     : 2013:07:03 17:11:06+02:00
Creator Tool                    : UnknownApplication
Document ID                     : 485f3702-e64e-11e2-0000-9699e81f2aa2
Format                          : application/pdf
Title                           : \376\377\000M\000i\000c\000r\000o\000s\000o\000f\000t\000 \000W\000o\000r\000d\000 \000-\000 \000T\000x\000 \000B\000e\000S\000m\000a\000r\000t\000 \000N\000e\000w\000 \000G\000B\000.\000d\000o\000c
Creator                         : \376\377\000C\000l\000a\000u\000d\000i\000a\000D
Author                          : ClaudiaD

EXIF Metadata provided by EXIF.tools