Seco Larm Usa Surface Type Door Closer Sd C141S Users Manual

SD-C141S to the manual 7ca51d03-db14-49e6-85e1-539f6d0dd194

: Seco-Larm-Usa Seco-Larm-Usa-Surface-Type-Door-Closer-Sd-C141S-Users-Manual-527302 seco-larm-usa-surface-type-door-closer-sd-c141s-users-manual-527302 seco-larm-usa pdf

Open the PDF directly: View PDF .
Page Count: 15

Surface-Type Door Closer

SD-C141S With Adjustable Sweep and Latch Speed

Reversible non-handed design.

For metal or wood doors up to 42" (107cm) wide.

Two independent valve adjustments for easy

setting of sweep and latch speed.

Back plate slides into place to cover adjustment

screws.

3

Narrow projection of only 1 /8" (35mm).

Anodized aluminum body.

Silver finish.

Forged steel arms.

Includes complete mounting hardware.

Two independent

valve adjustments:

1. Latch speed

2. Sweep speed

SD-962AR-36A For Exit Doors from 30" (76cm) to 48" (122cm) Wide

SD-962HL-4A Entry-Type Lever Trim, Non-Handed

For exit doors -- Allows exit from inside while locked

from outside.

Reversible non-handed design.

3

For metal or wood doors up to 1 /4" (45mm) thick.

3

Stainless-steel, /4" (19mm) throw latch bolt.

Deadlocking latch -- Prevents the use of credit

cards or similar means to open the latch bolt.

1

Allen-type /4-turn dogging lock -- Allows the exit

bar to be unlocked for extended periods of time.

Includes all hardware for typical installations.

Works with standard external door handle/lock

devices such as SD-962HL-4A (see below).

Heavy-duty steel construction.

Stainless-steel spring.

Rim-Type Exit Device

SD 962AR 36A

Entry-type lock (locks from outside, opens freely

from inside).

SC4, 6-pin lock.

Two keys included.

SD-962HL-4A

NEW

SD 962HL 4A

SD-962AR-36A

Access

25

Website: www.seco-larm.com e-mail: sales@seco-larm.com

Request-to-Exit Plates

‧All SECO LARM R T E Plates are available in white as well as without printing (blank). Customized printing is available. Contact SECO LARM for details.‧

7

2 /8(74mm)"

5

2 /16 (59mm)"

2 (51mm)”

S.P.D.T.

Timer

Illum.

SD-7202GC-PTQ

2” Square green, illuminated,

momentary pushbutton.

NO/NC contact rated

3A@120VAC/24VDC.

Includes: “PUSH TO EXIT” &

“PRESIONE PARA SALIR”

button faces.

Built-in timer (1~180 s).

Buzzer output for audio status.

7

1 /16 (37mm)"

1 (26mm)"

NEW

S.P.S.T.

SD-7201KBQ

Black momentary pushbutton

switch with ring guard.

N.C. contact rated 1A@125VAC.

7

1 /8(48mm)"

11/16" (17 5mm)

3

1 /8(36mm)"

D.P.S.T.

Illum.

SD-7103GC-PEQ

Green, illuminated, momentary

pushbutton.

NO/NC contact rated

5A@125~250 VAC.

Includes: “PUSH TO EXIT” &

“PRESIONE PARA SALIR”

button faces.

13

2 /16 (71mm)"

5

2 /16 (59mm)"

11/16 (17 5mm)"

SD-7103GC-PTQ

Green, illuminated, momentary

pushbutton.

NO/NC contact rated

3A@

Includes: “PUSH TO EXIT” &

“PRESIONE PARA SALIR”

button faces.

Built-in timer (1~180 s).

Buzzer output for audio status.

120VAC/24VDC.

S.P.D.T.

Timer

Illum.

1 (26mm)"

7

1 /16 (37mm)"

S.P.S.T.

SD-7101RAEX1Q

Red momentary pushbutton switch

with ring guard.

N.O. contact rated 1A@125VAC.

“EXIT” and “SALIDA” silk-screened

on plate.

S.P.S.T.

SD-7101KBPE1Q

Black momentary pushbutton

switch with ring guard.

N.C. contact rated 1A@125VAC.

“EXIT” and “SALIDA” silk-screened

on plate.

1

2 /8(54mm)"

13

2 /16 (71mm)" SD-7202GC-PEQ

2” Square green, illuminated,

momentary pushbutton.

NO/NC contact rated

10A@125~250 VAC.

Includes: “PUSH TO EXIT” &

“PRESIONE PARA SALIR”

button faces.

S.P.D.T.

Illum.

2" (51mm)

SD-7223GW-LQ

2” Square green, illuminated,

momentary pushbutton.

NO/NC contact rated

10A@125~250 VAC.

Includes: “PUSH TO EXIT” &

“PRESIONE PARA SALIR”

button faces.

White plastic plate to match décor

of certain rooms/walls.

S.P.D.T.

Illum.

NEWNEW

1

2 /8(54mm)"

13

2 /16 (71mm)"

2" (51mm)

D.P.S.T.

SD-7217GWQ

Green, ” dia., mushroom-cap

pushbutton.

NO/NC contact rated

5A@125VAC.

White plastic plate to match décor

of certain rooms/walls.

1½

1

1 /2(38mm)"

7

1 /8(48mm)"

7

2 /8(74mm)"

Access

26

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326

Request-to-Exit Plates

1½ (38mm)"

1½ (38mm)"

7

1 /8(47mm)"

2 (64mm)½"

7

2 /8(74mm)"

9

3 /16 (91mm)"

NEW NEW

1

1 /2(38mm)"

7

1 /8(47mm)"

7

2 /8(74mm)"

D.P.S.T.

SD-7201GC-PE1

Green, ” dia., mushroom-cap

pushbutton.

NO/NC contact rated

5A@125VAC.

“EXIT” and “SALIDA” silk-screened

on plate.

1½

SD-7113-GSP

Green, ” dia.,

mushroom-cap pushbutton.

NO/NC contact rated

5A@125VAC.

"EXIT" and "SALIDA"

silk-screened on plate.

1½

Equipped with a pneumatic

timer (2~60 sec).

1½ (38mm)"

1½ (38mm)"

5

2 /16 (59mm)" 7

1 /8(47mm)"

5

3 /16 (84mm)" 7

2 /8(74mm)"

SD-7201GA-PT1

Green, 1½” dia., mushroom-cap

pushbutton.

NO/NC contact rated

3A@

“EXIT” and “SALIDA” silk-screened

on plate.

Built-in timer (1~180 sec).

Buzzer output for audio status.

120VAC/24VDC.

S.P.D.T.

SD-7201GF-PE1

Green, ” dia., mushroom-cap

pushbutton.

D.P.D.T. switch. Two N.O. and two

N.C. contacts rated 5A@125VAC.

“EXIT” and “SALIDA” silk-screened

on plate.

1½

D.P.D.T.

D.P.S.T.

Illum.

SD-7251GCEX1Q

Green, 1½” dia., illuminated,

mushroom-cap pushbutton.

NO/NC contact rated

5A@125VAC.

“EXIT” and “SALIDA” silk-screened

on plate.

NEW

SD-7201RC-PE1

Red, ” dia., mushroom-cap

pushbutton.

NO/NC contact rated

5A@125VAC.

“EXIT” and “SALIDA” silk-screened

on plate.

1½

D.P.S.T.

RF Wireless

Pushbuttons

For a full line of RF wireless

Request-To-Exit pushbuttons,

see page 30.

Access

27

Timer

D.P.S.T.

SD-7213-GSP

Similar to SD-7113-GSP,

but single-gang.

Timer

D.P.S.T.

SD-7173-SSP

Stainless-steel, ” dia.

pushbutton.

NO/NC contact rated

5A@125VAC.

"EXIT" and "SALIDA"

silk-screened on plate.

1/4

Equipped with a pneumatic

timer (2~60 seconds).

NEW

Timer

D.P.S.T.

SD-7273-SSP

Similar to SD-7173-SSP

but single-gang.

Timer

D.P.S.T.

Website: www.seco-larm.com e-mail: sales@seco-larm.com

NEW

NEW

NEW

Wireless RF Request-to-Exit Plates

SD-8201GTPE1Q Single-Gang, 1½" (38mm) Diameter, Mushroom-Cap Pushbutton

SD-8202GT-PEQ , 2" (51mm) Square Illuminated Pushbutton

SD-8103GT-PEQ Slimline, Small Illuminated Pushbutton

Single-Gang

Ideal for hard-to-wire installations such as in cement

walls or brick buildings.

Built-in RF transmitter:

Powered by 9VDC (battery included).

Operates at 315MHz and up to 50ft (15m).

10

Over 68 billion (6.8x10 ) possible codes.

Compatible with all SECO-LARM receivers.

LED to indicate RF transmission and low battery:

Blue: Normal Operation, Red: Low Battery

–

–

–

–

–

SD 8202GT PEQ

SD 8201GTPE1Q

SD 8103GT PEQ

1½

(38mm)

"4½

(115mm)

" 4½

( 115mm)

"

4½

(115mm)

"

2

(51mm)

"

3/4"

( 18mm)

1

2 /8(54mm)" 1

2 /8(54mm)"

1

2 /8(54mm)"

1

3 /8(80mm)" 1

2 /4(57mm)"

11

2 /16 (68mm)"

NEW

NEW

SD-9163-KSVQ Outdoor "No Touch" Slimline Plate with Mechanical Override Button

SD-9263-KSVQ Outdoor "No Touch" Single-gang Plate with Mechanical Override Button

SD 9163 KSVQ SD 9263 KSVQ

NEW

NEW

SD-9163-KSQ Outdoor "No Touch" Slimline Plate

SD-9263-KSQ Outdoor "No Touch" Single-gang Plate

SD-9163-KSVQ

Outdoor slimline "No-Touch" sensor.

Adjustable sensing range and delay time.

Mechanical override button.

SD-9263-KSVQ – Similar to SD-9163-KSVQ,

but single-gang.

SD-9163-KSQ – Similar to SD-9163-KSVQ,

but without mechanical override button.

SD-9263-KSQ – Similar to SD-9263-KSVQ,

but without mechanical override button.

SD 9163 KSQ SD 9263 KSQ

"No Touch" Request-to-Exit Plates

Access

28

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326

NEW

NEW

NEW

"No Touch" Request-to-Exit Plates

SD-927PKC-NEQ IR RTE Stainless-Steel Plate (English)

SD-927PKC-NFQ IR RTE Plate (French)

SD-927PWCQ IR RTE Plastic Plate (English, French & Spanish)

"No Touch"

"No Touch" Stainless-Steel

SD-927PKC-NSQ IR "No Touch" RTE Stainless-Steel Plate (Spanish)

"No Touch"

SD-927PKC-NxQ

Specifications

Operating voltage

Relay type

Response time

Output time

Sensing range

Operating temperature

Weight

Dimensions

12VDC

Form C dry contact, 3A@12VDC

10ms

0.5s or as long as unit is triggered

4” (100mm) 2” (50mm)

4°~131° F ( 20°~55° C)

3 oz (85g)

131

4 /2”x2 /4”x1 /16” (115x70x27 mm)

SECO-LARM's "No Touch" Request-To-Exit Sensors use IR

technology to open a door or activate a device with the

simple wave of a hand. The trigger distance is up to 4"

(10cm). Since they are no touch, these sensors are ideal

for use in hospitals, clinics, labs, cleanrooms (to reduce the

risk of contamination), schools, factories, or offices

(anywhere an easy way to exit is required).

"No Touch" -- Just wave a hand in front of the sensor.

Sensing range up to 4" (100mm). Range is 2" (50mm)

for SD-927PWCQ.

Selectable LED color, turns from red to green or

green to red.

Reduces the risk of cross contamination.

Easy and clean operation.

Reliable IR technology senses motion.

Durable, stainless-steel, single-gang plate.

Quick-connect screwless terminal block.

SPDT 3 Amp relay output.

SD 927PWCQ

SD 927PKC NEQ

SD-927PWCQ

NO TOUCH

EXIT

SALIDA

SIN TOCAR

SORTIE

SANS CONTACT

SD-927PWCQ

incorporates a white

plastic faceplate to

match the décor of

many walls.

Six decals included:

(AD DBO SD927E) (AD DBO SD927S)

Optional Point-of-Sales Displays -- Display ad available

in English or Spanish, which includes a working

demonstration sensor.

Access

29

NEW

SD 927PKC NSQ SD 927PKC NFQ

Website: www.seco-larm.com e-mail: sales@seco-larm.com

Request-to-Exit Plates --- Vandal Resistant

SD-7204SGEX1Q

Vandal-resistant, ½” dia.,

stainless-steel pushbutton.

NO/NC contact rated

5A@250VAC.

“EXIT” and “SALIDA”

silk-screened on plate.

D.P.S.T.

SD-7104SGEX1Q

Vandal-resistant, ½” dia.,

stainless-steel pushbutton.

NO/NC contact rated

5A@250VAC.

“EXIT” and “SALIDA”

silk-screened on plate.

D.P.S.T.

1½" (38mm)

1

1 /4" (32mm)

SD-7175SGEX1Q

Vandal-resistant, ½” dia.,

illuminated momentary

pushbutton.

2-Color illuminated

red/green LED (12VDC).

NO/NC contact rated

5A@250VAC.

“EXIT” and “SALIDA”

silk-screened on plate.

D.P.S.T.

Illum.

1½" (38mm)

1

1 /4" (32mm)

1½" (38mm)

1

1 /4" 32( mm)

1½" (38mm)

1

1 /4" (32mm)

D.P.S.T.

Illum.

SD-7275SGEX1Q

Vandal-resistant, ½” dia.,

illuminated momentary

pushbutton.

2-Color illuminated

red/green LED (12VDC).

NO/NC contact rated

5A@250VAC.

“EXIT” and “SALIDA”

silk-screened on plate.

Request-to-Exit Key Switch Plates

SD-72051-V0 Momentary (N.C., turn to open, pre-wired) Switch, Single Gang

SD-71051-V0 Momentary (N.C., turn to open, pre-wired) Switch, Slimline

SD-72002-V0 Shunt (N.C., turn to open, pre-wired) Switch, Single Gang

SD-71002-V0 Shunt (N.C., turn to open, pre-wired) Switch, Slimline

Single Gang

SD-72051-V0

SD-72002-V0

Slimline

SD-71051-V0

SD-71002-V0

Keylock Switch Types:

SD 72051 V0

SD 71051 V0

Maintained ON

Momentary OFF

SD 72002 V0

SD 71002 V0

Maintained ON

Shunt OFF

SD-72051-V0

SD-71051-V0

n to open, pre-wired)

Momentary Switch, Single-Gang Plate

Momentary Switch, Slimline Plate

Stainless-steel plate.

Includes shunt ON, momentary OFF

(N.C., tur spring-loaded keylock switch.

Switch is maintained ON, springs back from OFF.

Key is removable from the ON position only.

SD-72002-V0

SD-71002-V0

Shunt Switch, Single-Gang Plate

Shunt Switch, Slimline Plate

Stainless-steel plate.

Includes maintained ON/OFF,

(N.C., turn to open, pre-wired) keylock switch.

Switch can be left ON or OFF.

Key is removable from the ON or OFF position.

Specifications

Contact Rating 1A@12VDC

Replacement Keys SS 090KN 0

60°

30°

ON (N C ) Springs

Back

OFF (N O )

60°

30°

ON (N C )

OFF (N O )

Access

30

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326

SS-090

Shunt On/Off

Two Terminals, SPST

SS-090-1

Two Terminals, SPST

Shunt On/Off

Maintained ON/OFF,

key removable from OFF position only.

Commonly used in situations which

require return of key to ensure device

is turned OFF.

Replacement keys available.

See chart below.

SS-092-2

Shunt On/Off, Off/On

Four Terminals, Dual SPST

SS-095

Momentary On/Shunt Off

Two Terminals, SPST

Tubular Key Lock Switches

Remote Plates

SS-090 SS-095 SS-090-1 SS-092-2 SS-090KN Key #

SS 090 2H1 SS 095 1H1 SS 090 1H1 SS 090KN 1 1301

SS 090 2H3 SS 095 1H3 SS 090KN 3 1303

SS 090 2H5 SS 095 1H5 SS 090KN 5 1305

SS 090 2H7 SS 095 1H7 SS 090KN 7 1307

SS 090 2H9 SS 095 1H9 SS 090KN 9 1309

SS 090 2H0 SS 095 1H0 SS 090 1H0 SS 092 2H0 SS 090KN 0 1300

SS 090 2H2 SS 095 1H2 SS 090KN 2 1302

SS 090 2H4 SS 095 1H4 SS 090KN 4 1304

SS 090 2H6 SS 095 1H6 SS 090KN 6 1306

SS 090 2H8 SS 095 1H8 SS 090KN 8 1308

SS 090 2HX SS 095 1HX SS 090KN X 1310

SS-090KN

Spare Keys

SS-199 SS-299

Maintained OFF, springs

back from ON, key removable

from OFF position only.

Commonly used for

momentary arm/disarm

alarm inputs or other

applications requiring

high-security momentary ON.

Replacement keys available.

See chart below.

Maintained ON/OFF,

key removable from both

ON and OFF positions.

Commonly used as

ON/OFF switch to arm/

disarm alarm or shunt zone.

Replacement keys available.

See chart below.

Two switches, one always

ON while the other is OFF.

Connect terminals 1

& 2 for SPDT contact.

Use to arm/disarm

car alarms and

break starter circuit.

Replacement keys available.

See chart below.

Replacement keys for the above

tubular key lock switches. Eleven

different key numbers available

(1300-1310).

See chart for information on which

key numbers are available for each

key lock and the correct key lock part

number for ordering.

Keylock Model Number Chart

Stainless-steel single-gang

3

plate with /4” D-hole.

Note: Please specify key number when ordering.

Please see below.

Stainless-steel slimline

3

plate with /4” D-hole.

60°

30°

OFF (N O )

ON (N C )

60°

30°

OFF (N O )

ON (N C )

60°

30°

OFF (N O )

ON (N C )

60°

15°

15°

OFF (N O )

ON (N C )

(Only below key #'s are available)

Access

31

Website: www.seco-larm.com e-mail: sales@seco-larm.com

NEW

NEW

EAP-5D1Q One Output, 5A@12VDC (4.5A@24VDC)

Features :

AC power-failure supervision relay.

Battery-failure supervision relay.

Selectable 2.2 kOhm End-of-Line (EOL) resistor

for AC-failure and battery-failure supervision relays.

Selectable delay timer (5 seconds, 5 minutes,

5 hours) for AC-failure supervision relay.

LED overload indicator and automatic shutdown for

short-circuit protection.

Over-current fuse-protected AC input.

Built-in backup battery charger.

Automatically switch to backup battery if AC fails.

Individual AC input and DC output LED status

indicators.

Power:

Field-selectable 12 or 24 VDC output.

Operating voltage input: 110~240 VAC.

Adjustable output voltage range (11~15 VDC,

23~26 VDC) to compensate for voltage drops.

Supply current: 5A@12VDC, 4.5A@24VDC.

AC input fuse rating 3.15 Amp (glass fuse).

DC output overload sensing with red LED indicator

and automatic shutdown during short circuit.

Enclosure:

Heavy-duty steel case to protect the power

connections.

Removable steel cover for easy access.

Ventilation holes to prevent heat buildup.

Enclosure has enough room for two 7AH batteries.

6ft (1.8m) Power cord and battery leads included.

7 3 9

Dimensions: 12 /16”x12 /16”x3 /16” (316x310x90 mm).

Knockout on the cover for optional cam lock.

Access Control Power Supply

7 3

Dimensions: 12 /16 12 /16

(316x310x90 mm)

9

"x "x3 /16"

EAP-5D1MQ Power Supply Board

+

-

AC input LED

status indicator

AC input fuse DIP switch

for 12 or 24 VDC

output selection

VR1 rotary knob

for DC output

voltage range

adjustment

AC failure

delay timer

DIP switch

End-of Line

(EOL) 2.2 kOhm

resistor DIP switch

Battery presence

and low battery

monitor DIP switch

DC output

terminal block

12 VDC Battery

(Optional)

Back-up

battery terminal

DC output LED

status indicator

AC failure Supervision

Relay Output to

Audio/Visual

warning device

Power Supply

Power Supply

Battery failure & low battery

Supervision Relay Output to

Audio/Visual warning device

110~240 VAC

Input

Same access control power

supply board as is used in

EAP-5D1Q above.

3 3

Dimensions: 7"x4 /4"x1 /4"

(178x120x44 mm).

(Batteries not included)

Sample Application:

Specifications

Output voltage 12 or 24 VDC selectable via DIP switch

Input voltage 110~240 VAC

Adjustable output 11~15@12VDC setting, via VR switch

voltage range 23~26@24VDC setting, via VR switch

# of outputs 1

Supply current 5A@12VDC/4.5A@24VDC

AC input fuse rating 3.15A (glass fuse)

LED status indicator AC input (Green), DC output (Red)

End-of-line resistor (EOL) Selectable ON (2.2 k ) or OFF via DIP switch

AC-failure relay delay timer Selectable 5s, 5min or 5h via DIP switch

Supervision relays Contact rating: 3A@24VDC dry relay output

Ω

Accessory:

Access

32

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326

NEW

NEW

NEW

Video Door Phone

DP-121Q Includes One Monitor and One Camera, Black and White

DP-121-SQ Additional Monitor

DP-121-CQ Additional Camera

Camera

Monitor

Display

Weight

Current draw

Power source

Dimensions

CRT

2 lb 8 oz (1.1kg)

800mA@15~18 VDC

15VDC+/ 15%

11 1

5

9 /8"x7 /16"x3 /8" (245x196x79 mm)

SECO-LARM's Video Door Phone displays an

image of the visitor in real time on the phone's

monitor, and a built-in microphone and speaker on

the camera unit lets users communicate with visitors.

Authorized visitors can then be granted entry with

the push of a single button.

Interconnect up to two cameras and two monitors.

For home or business use.

Camera has six LEDs for nighttime operation.

Remotely and securely talk to visitors.

Remotely unlock doors, gates, etc. from the monitor.

Simple four-wire connection.

Easy surface-mount installation.

Camera and monitor turn on and off with the push

of a button.

Camera and monitor turn off automatically when

not in use.

Adjustable contrast, brightness, and ringer volume.

LED indicators for power and operation.

Camera contains a built-in angle adjustment.

Easily connect an additional monitor

and/or an additional camera

Secondary Monitor: DP-121-SQ

Additional Camera: DP-121-CQ

Sample Application:

Primary Monitor Secondary Monitor

(Optional DP-121-SQ)

Locking Device

(not included)

Locking Device

(not included)

Camera 1 Camera 2

( DP-121-CQ)Optional

Type

Chip

Resolution

Relay output

Lens

Min. illumination

Weight

Dimensions

B/W Camera

CCD

380 TV lines

1A@12VDC max. dry contact

3.6mm

0.8 lux

8 oz (220g)

115 1

5 /4"x3 /16"x1 /2" (134x100x38 mm)

Specification:

Specification:

Access

33

Website: www.seco-larm.com e-mail: sales@seco-larm.com

Stand-Alone Proximity Reader

PR-112S-A Tri-color LED Status Bar, Weatherproof, 100-User Capability NEW

Accessories:

PR-K1S1-A Proximity Cards

Additional user cards.

Sold in packages of 10.

PR-K1K1-AQ Key-Fob Proximity Tags

Additional user cards, key-fob style.

Sold in packages of 10.

The stylish case and small size make the PR-112S-A

ideal for use in offices, homes, and apartments.

The wave-shaped tri-color LED status bar accents the

case design. Simple installation, quick programming,

and high reliability make the PR-1125-A ideal for any

situation.

Sealed and weatherproof (IP67).

Tri-color wave-shaped LED status bar indicates

proximity reader's mode and status:

On/Valid Card Indicator

Programming Mode

Invalid Card

Output relay for either timed (1 to 180 seconds) or

"Toggle" mode.

Egress input for exiting the protected premises.

Buzzer for audible confirmation (programmable).

Up to 100 user cards can be programmed.

User cards easily deleted. Delete a single card,

or all cards.

Up to five "Master" cards can be programmed.

10 Cards included.

•

•

•

Additional cards available in standard

(model # PR-K1S1-A) or key-fob

(model # PR-K1K1-AQ) size.

Blue

Green

Red

Proximity

Card Reader

Proximity Card

(10 cards included)

Access

Dimensions:

PR-112S-A

Specifications

Operating voltage

Current draw

Max. read distance

User card limit

Master card limit

Transmit frequency

Output

Contact rating

Relay time delay

Operating temp.

Enclosure rating

Dimensions

12VDC

Standby: 80mA@12VDC

Active: 200mA@12VDC

6" (15cm)

100 Cards

5 Cards

125 kHz

1 Relay (NO/NC/COM)

1A@30V

1~180 s or Toggle mode

4 ~158 F ( 20 ~70 C)

IP67

3

3 / "x1 "x " (95x44x17 mm)

4

° ° ° °

3 11

/ /

4 16

3

3/”

4

(95mm)

3

1 /4” (44mm)

(17mm)

9

1 /16”

(40mm)

13 16”

/

(21mm)

11/16”

(17mm)

5/ ”

8

(16mm)

(21mm)

Front

Back (Mounting Plate)

(21mm)

13 ”

/16

13 ”

/16

11/16”

Website: www.seco-larm.com e-mail: sales@seco-larm.com

35

3

1 /8"

(34mm)

3

1 /4"

(44mm)

5

4 /8"

(117mm)

7

2 /8"

(73mm)

Digital Access Keypads

SK-1011-SQ One Output, 100 Users

SK-1131-SQ Three Outputs, 120 Users, Backlit Keypad

Door unlocked announcer

Request to exit input

Main relay lockout

Tamper switch

Silent operation

Operating voltage

Number of outputs

Number of users

Backlit keypad

Mantrap

Door forced open warning

Door propped open warning

Key activation output

Door auto relock

Alarm output

Duress output

LED connections

Yes

Yes

Yes

Yes

Yes

12~24 VAC/VDC

1

100

No

No

No

No

No

No

No

No

Fixed internal

SK-1011-SQ

Yes

Yes

Yes

Yes

Yes

12~24 VAC/VDC

3

120

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

External connection*

* LEDs can be wired to show status of external devices such as an alarm control panel.

SK-1131-SQ

SK-1011-SQ SK-1131-SQ

Three outputs: Two relays, one transistor.

Backlit keypad: For easy daytime and nighttime use.

Mantrap: Ensures only one door can be opened at a time.

Duress output after multiple failed code entries.

Door-forced-open warning: Keypad beeps continuously

if the door to the protected premises is forced open.

Door-propped-open warning: Beeps continuously if the

door is open after the programmed open time elapses.

Alarm output: Can trigger an optional alarm control panel

if a protected door is forced open or propped open.

Keypad active output: Activates for 10 seconds when

any key on the keypad is pressed.

Door auto relock: Can relock an open door when

the relock time expires or after the door is closed.

Additional Features for SK-1131-SQ:

Ideal for access and security applications.

Code lockout after multiple failed code entries.

Stainless-steel face, durable and attractive.

Built-in buzzer for audible confirmation.

Form C relay output (5A@28VDC).

Output relay activation buzzer.

Relay output inhibit control (programmable) –

Locks the relay output to prevent user access.

Auto or manual code-entry checking.

Egress input -- Lets users exit the protected premises

without keying in the code.

Built-in tamper (N.C.) circuit.

EEPROM memory -- Prevents data loss.

Power -- 12~24 VAC/VDC, no need to change jumpers.

Shared Features:

Dimensions:

Model Comparison Chart:

Operating voltage

10mA@12VDC

30mA@12VDC

80mA@12VDC

5A@28VDC

N/A

10mA@12VDC

30mA@12VDC

130mA@12VDC (2 relays active)

5A@30VDC

6 oz (180g) 7 oz (200g)

1A@28VDC

100mA@24VDC

Standby

Key pressed

Relay output

Relay #1

Relay #2

Current draw

Relay output

N.O. ground

N.C. ground

Transistor ground output

Egress

Door sensor input

Weight

N/A

12~24 VDC/VAC

SK-1011-SQ SK-1131-SQ

Specifications:

Access

36

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326

NEW

NEW

Outdoor Digital Access Keypads

SK-1123-SQ 110 Users, Two Relays, Surface Mount

SK-1123-FQ 110 Users, One Relay, One Transistor Ground O/P, Flush Mount

Model Comparison Chart:

Each relay can be programmed for momentary

(1~999 seconds) or toggle operation.

Code flexibility: Each code can be 4~8 digits long.

Egress input for exiting the premises.

Dual voltage: 12~24 VAC/VDC operation.

Tamper switch: N.C. Dry contact 3A@12VDC.

Mantrap: For a protected area with two doors, this feature

allows only one door to be open at any time.

All features are programmed directly from the keypad,

eliminating the need for an external programmer.

Duress output: Signals a silent alarm if an authorized user

is forced to open the door under duress.

Door-forced-open and door-propped-open alarm output.

Keypad can be programmed to emit beeps for key

presses or operate in silent mode.

Programmable backlight: Always ON, ON when keys

are pressed, Always OFF; suitable for solar applications.

Auto or manual code-entry checking:

– Auto: No # key required after each code.

– Manual: # Key must be pressed after every code.

Anti-Tailgate: Auto-relock to prevent tailgating.

Operating voltage

15mA@12VDC

45mA@12VDC

130mA@12VDC (2 relays)

5A@28VDC

1A@28VDC

10mA@12VDC

45mA@12VDC

100mA@12VDC

5A@30VDC

22 oz (630g) 15 oz (430g)

N/A

100mA@24VDC

SK-1123-SQ SK-1123-FQ

Standby

Key pressed

Relay output

Relay #1

Relay #2

Current draw

Relay output

N.O. ground

N.C. ground

Transistor ground output

Egress

Door sensor input

Weight

N/A

12~24 VDC/VAC

SK-1123-SQ

SK-1123-SQ

SK-1123-FQ

SK-1123-FQ

Specifications:

Number of users

Number of outputs

Number of relays

Backlit keys

Tamper switch

Door unlocked annunciation

Request to exit input

Main relay lockout (inhibit)

Mantrap

Door forced open warning

Door propped open warning

Door auto relock

Alarm/duress output

Key activation output

Type of mounting

110

2

2

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Surface

110

2

1

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

No

Flush

7 8 9

415/16"

(125mm)

31/8"

(78mm)

2"

(51mm)

45/8"

(118mm)

113/16"

(45mm)

31/4"

(82mm)

Dimensions:

Access

37

Website: www.seco-larm.com e-mail: sales@seco-larm.com

NEW

Vandal-Resistant Outdoor Keypad

Specifications

Number of outputs

Relay output

Additional outputs

Egress

Inhibit input

Dimensions

Weight

SK-3123-SQ 101 Users, Two Outputs, Rugged Stainless-Steel, Illuminated

The ENFORCER SK-3123-SQ is rugged, vandal resistant,

and weatherproof, making it ideal for outdoor applications.

The keypad can be programmed to operate a fail-safe or

fail-secure locking device.

Unique faceplate hinge allows

for easy installation.

Individual keys are backlit.

Entire keypad illuminated

for easy nighttime use.

Over 100 million possible code combinations.

Code flexibility: Each code can be 2~8 digits long.

Dual voltage: 12~24 VDC/VAC operation.

Two Form C relays, each rated at 5A@24VDC.

Keypad active outputs.

Individual keys are backlit and entire keypad is

illuminated for easy nighttime use.

All features are programmed directly from the keypad:

No need for an external programmer.

Keypad can be programmed to emit beeps for key

presses or operate in silent mode.

EEPROM memory protects programmed information

in case of power loss.

Tamper switch: N.C. dry contact 3A@12VDC.

Egress input for exiting the protected premises.

Rugged stainless-steel construction.

Current draw

Standby

Keys lit

Relay active

@

30mA 12VDC

@

75mA 12VDC

@

125mA 12VDC

2

@

5A 24VDC, Form C, NO/NC/COM

Keypad active

N.O. ground

N.O. ground

313

6 /8”x5 /4”x4 /8” (162x133x111 mm)

4 Ib 7 oz (2.1kg)

Dimensions: SK-3123-SQ

3

6 /8”

(162mm)

1

5 /4” (133mm) 3

4 /8” (111mm)

Access

38

1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326

NEW

NEW

NEW

Mullion-Style Weatherproof Stand-Alone Keypads

Sealed-Housing Stand-Alone Keypads

SK-2323-SDQ 1,010 Users, Two Relay Outputs, Illuminated

SK-2323-SPQ 1,010 Users, Two Relay Outputs, Illuminated, Built-in Proximity Reader

SK-1323-SDQ 1,010 Users, Two Relay Outputs, Illuminated

SK-1323-SPQ 1,010 Users, Two Relay Outputs, Illuminated, Built-in Proximity Reader

ENFORCER Mullion-Style Weatherproof Stand-Alone

Keypads are rugged, vandal resistant, and weatherproof,

making them ideal for outdoor applications.

The SK-2323-SPQ also comes equipped with a built-in

proximity reader, allowing it to read proximity cards.

12~15 VDC operation.

Two relay outputs.

Backlit keys for easy nighttime use.

All features are programmed directly from the keypad –

No need for an external programmer.

Weatherproof for outdoor use.

3

Dimensions: 6”x1 /4”x1” (152x44x24 mm).

Rugged aluminum construction.

Additional user cards also available, model # PR-K1S1-A

or PR-K1K1-AQ. See page 35.

ENFORCER Sealed-Housing Stand-Alone Keypads are

contained in a sealed metal housing, making them suitable

for hazardous environments. The SK-1323-SPQ also comes

equipped with a built-in proximity reader, allowing it to read

proximity cards.

12~15 VDC operation.

Two relay outputs.

Backlit keys for easy nighttime use.

All features are programmed directly from the keypad –

No need for an external programmer.

Weatherproof for outdoor use.

37

Dimensions: 4 /4”x3”x /8” (120x76x22 mm).

Rugged stainless-steel construction.

Additional user cards also available, model # PR-K1S1-A or

PR-K1K1-AQ. See page 35.

NEW

SK 2323 SPQ Shown

SK 1323 SPQ Shown

Access

39

Website: www.seco-larm.com e-mail: sales@seco-larm.com