Secure Wireless 915DC DEVICE CONTROLLER User Manual 234730X1 indd

Secure Wireless, Inc DEVICE CONTROLLER 234730X1 indd

USERS MANUAL

Product DescriptionThe AT&T model number SW-ATT-DC is a 915MHz Wireless Device Controller that is used to control AC power to small appliances, such as a lamp. The unit is plugged directly into one socket of an AC power outlet. Then install the retaining screw into the plastic tab located at the top of the unit to secure the unit to the AC outlet.This Device Controller can be utilized to control turning lamps and other small appliances on and off. Follow these steps to install the Device Controller: 1. Plug the Device Controller into an AC power outlet.2. Plug the lamp or other small appliance into the unit.Discovering and Registering the Device ControllerFollow these steps to discover and register the device controller: Step Action1. Place the DLC into Discovery Mode in DLD.2. Make the Device Controller discoverable by pressing the Learn button located on the side of the unit.3. Confi rm that the Device Controller has been discovered in DLD.4. Label the Device Controller in DLD.This equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for help.Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’sauthority to operate the equipment.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. exploitation est autorisée aux deux conditions suivantes: (1) appareil ne doit pas produire de brouillage, et (2) utilisateur de appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible en compromettre le fonctionnement.Copyright © 2013 Linear LLC. 234730X1FCC Compliance StatementThis device complies with FCC Rules and Regulations as Part 15 devices as well as Industry Canada license exempt RSS Rules and Regulations. Operation is subject to the following two (2) conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.LISTEDSW-ATT-DC RTL 41807 Installation Instructions

Navigation menu