Secure Wireless 915DC DEVICE CONTROLLER User Manual 234730X1 indd
Secure Wireless, Inc DEVICE CONTROLLER 234730X1 indd
USERS MANUAL
Product Description
The AT&T model number SW-ATT-DC is a 915MHz Wireless
Device Controller that is used to control AC power to small
appliances, such as a lamp. The unit is plugged directly into
one socket of an AC power outlet. Then install the retaining
screw into the plastic tab located at the top of the unit to
secure the unit to the AC outlet.
This Device Controller can be utilized to control turning lamps
and other small appliances on and off.
Follow these steps to install the Device Controller:
1. Plug the Device Controller into an AC power outlet.
2. Plug the lamp or other small appliance into the unit.
Discovering and Registering the Device Controller
Follow these steps to discover and register the device
controller: Step Action
1. Place the DLC into Discovery Mode in DLD.
2. Make the Device Controller discoverable by pressing the
Learn button located on the side of the unit.
3. Confi rm that the Device Controller has been discovered
in DLD.
4. Label the Device Controller in DLD.
This equipment has been tested and found to comply with
the limits for Class B Digital Device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help.
Any changes or modifi cations not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. exploitation est
autorisée aux deux conditions suivantes: (1) appareil ne doit pas
produire de brouillage, et (2) utilisateur de appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible en
compromettre le fonctionnement.
Copyright © 2013 Linear LLC. 234730X1
FCC Compliance Statement
This device complies with FCC Rules and
Regulations as Part 15 devices as well as
Industry Canada license exempt RSS Rules
and Regulations. Operation is subject to the
following two (2) conditions: This device
may not cause harmful interference. This
device must accept any interference received,
including interference that may cause
undesired operation.
LISTED
SW-ATT-DC RTL 41807 Installation Instructions