Secure Wireless EV-F12CHAN Remote Control Transmitter User Manual WS4979

Secure Wireless, Inc Remote Control Transmitter WS4979

User Manual

WS4979 12 Channel Wireless Key Congratulations on the purchase of the WS4979, the industries first 12 channel remote control. This key will allow you to arm and disarm as well as control keypad functions, open and close garage doors and security gates or virtually any remote function you can think of. This is the perfect remote to add to DSC’s new garage relay module with integrated laser parking (PC-5650) to control anything that can be turned ON or OFF. Section 1. How to Enroll the WS4979 To enroll channels 1-4, use the 6 digit serial number printed on the back of the WS4979. To enroll channels 5-8 add ‘1’ to the serial number and for channels 9-12 add ‘2’ to the serial number. For example if the serial number printed in the back of the remote is 612345. 612345 Channel 1-4 (Buttons 1-4 on the front) 612346 Channel 5-8 (Level shift to GREEN LED and use buttons 1-4 on the front) 612347 Channel 9-12 (Level shift to AMBER LED and use buttons 1-4 on the front) * If you are using the WS4979 with a DSC relay module (PC-5650) to interface with garage doors, security gates or lighting controls, you do not need to enroll the serial number since it is a code learning system. Refer to the PC-5650 manual Section 2. Operation of the WS4979 The small center button on the WS4979 is used as a level shift to move from channels 1-4 to 5-8 and 9-12. 1) Press and hold the center button of the WS4979 2) Watch as the LED on the WS4979 changes from green to amber and back to red. The RED LED indicates channels 1-4, the GREEN LED indicates channels 5-8 and the AMBER indicates channels 9-12*. 3) When you see the appropriate color LED release the center button. The LED will pulsate that color to indicate that you are in the appropriate channels. Press one of the four buttons and the LED will stop flashing and will default back to channels 1-4. * NOTE: The WS4979 always defaults to channels 1-4 so it is NOT necessary to hold the center button to access channels 1-4. If you are in Channels 5-8 or 9-12 the unit will ‘time out’ after 5 seconds if no buttons are pressed. Compatibility: The WS4979 is compatible with the following receivers: PC5650, PC4164-433, PC5132-433, RF5108-433, RF5501-433, NT9005 and NT9010. ADD the replacing batteries section, belt clip assembly and mounting and warranty section of the WS4939 which I have attached as PDF’s. Section 3: Additional Notes The WS4979 Wireless Key requires TWO CR2025 lithium batteries. Replacing batteries 1) Open the case by inserting a coin or a flat head screw driver at the base and carefully twist the screwdriver to separate the top and bottom plastic. 2) Using a #1 Phillips screw driver, remove the screw that holds the circuit board to the back of the case. The screw is in the center of the circuit board. 3) Insert a small flat head screwdriver at the base of the board and carefully lift it up. 4) Note the polarity of the battery as etched into the bottom side of the case. Improper handling of lithium batteries may result in heat generation, explosion or fire, which may lead to personal injuries. WARNING: Danger of explosion if batteries are installed incorrectly, Replace ONLY with Panasonic or Toshiba CR2025 Batteries. Keep away from small children. If batteries are swallowed, promptly see a doctor. Do not try to recharge batteries. Disposal of used batteries must be made in accordance with waste recovery and recycling regulations in your area.
IC: 4676A-EV433P The term ‘IC:’ before the radio certification number only signifiesthat Industry Canada Technical specifications were met.Section 4: Miscellaneous Uses4.1 Wall or Under Counter MountThe included wall/under counter enclosure is useful for a multitude of applications. It is perfectfor a medical panic with mounting next to showers, beds or counters. Excellent for commercialuse as an under desk/counter panic button. Wall or Desk Mount Remote Snaps In4.2 Belt ClipThe included belt/visor clip is excellent for wireless ‘on the go’ applications like keyless entry forgarage doors, electric strikes or even jewelry store panic buttons that are kept on the person. Itis also convenient to attach to a visor for garage door or security gate access.Belt Clip

Navigation menu