Secure Wireless EV-F12CHAN Remote Control Transmitter User Manual WS4979

Download:
Mirror Download [FCC.gov]
Document ID	429046
Application ID	5A1cclHGVoh2Of0V2G/qeQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.09kB (351165 bits)
Date Submitted	2004-06-08 00:00:00
Date Available	2004-06-07 00:00:00
Creation Date	2004-04-07 23:09:56
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-04-07 16:10:51
Document Title	Microsoft Word - WS4979.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	HZhao

WS4979 12 Channel Wireless Key
Congratulations on the purchase of the WS4979, the industries first 12 channel
remote control. This key will allow you to arm and disarm as well as control keypad
functions, open and close garage doors and security gates or virtually any remote
function you can think of. This is the perfect remote to add to DSC’s new garage relay
module with integrated laser parking (PC-5650) to control anything that can be turned
ON or OFF.
Section 1. How to Enroll the WS4979
To enroll channels 1-4, use the 6 digit serial number printed on the back of the
WS4979. To enroll channels 5-8 add ‘1’ to the serial number and for channels 9-12
add ‘2’ to the serial number. For example if the serial number printed in the back of the
remote is 612345.
612345
612346
612347
Channel 1-4 (Buttons 1-4 on the front)
Channel 5-8 (Level shift to GREEN LED and use
buttons 1-4 on the front)
Channel 9-12 (Level shift to AMBER LED and
use buttons 1-4 on the front)
* If you are using the WS4979 with a DSC relay module (PC-5650) to interface with
garage doors, security gates or lighting controls, you do not need to enroll the serial
number since it is a code learning system. Refer to the PC-5650 manual
Section 2. Operation of the WS4979
The small center button on the WS4979 is used as a level shift to move from channels
1-4 to 5-8 and 9-12.
1) Press and hold the center button of the WS4979
2) Watch as the LED on the WS4979 changes from green to amber and back
to red. The RED LED indicates channels 1-4, the GREEN LED indicates
channels 5-8 and the AMBER indicates channels 9-12*.
3)
When you see the appropriate color LED release the center button. The
LED will pulsate that color to indicate that you are in the appropriate
channels. Press one of the four buttons and the LED will stop flashing and
will default back to channels 1-4.
* NOTE: The WS4979 always defaults to channels 1-4 so it is NOT necessary to hold
the center button to access channels 1-4. If you are in Channels 5-8 or 9-12 the unit
will ‘time out’ after 5 seconds if no buttons are pressed.
Compatibility:
The WS4979 is compatible with the following receivers: PC5650, PC4164-433,
PC5132-433, RF5108-433, RF5501-433, NT9005 and NT9010.
ADD the replacing batteries section, belt clip assembly and mounting and warranty
section of the WS4939 which I have attached as PDF’s.
Section 3: Additional Notes
The WS4979 Wireless Key requires TWO CR2025 lithium batteries.
Replacing batteries
1) Open the case by inserting a coin or a flat head screw driver at the base and
carefully twist
the screwdriver to separate the top and bottom plastic.
2) Using a #1 Phillips screw driver, remove the screw that holds the circuit board to
the back of
the case. The screw is in the center of the circuit board.
3) Insert a small flat head screwdriver at the base of the board and carefully lift it up.
4) Note the polarity of the battery as etched into the bottom side of the case. Improper
handling
of lithium batteries may result in heat generation, explosion or fire, which may lead to
personal injuries.
WARNING: Danger of explosion if batteries are installed incorrectly, Replace ONLY
with Panasonic or Toshiba CR2025 Batteries. Keep away from small children. If
batteries are swallowed, promptly see a doctor. Do not try to recharge batteries.
Disposal of used batteries must be made in accordance with waste recovery and
recycling regulations in your area.
Section 4: Miscellaneous Uses
4.1 Wall or Under Counter Mount
The included wall/under counter enclosure is useful for a multitude of applications. It is perfect
for a medical panic with mounting next to showers, beds or counters. Excellent for commercial
use as an under desk/counter panic button.
Wall or Desk Mount
Remote Snaps In
4.2 Belt Clip
The included belt/visor clip is excellent for wireless ‘on the go’ applications like keyless entry for
garage doors, electric strikes or even jewelry store panic buttons that are kept on the person. It
is also convenient to attach to a visor for garage door or security gate access.
Belt Clip
IC: 4676A-EV433P The term ‘IC:’ before the radio certification number only signifies
that Industry Canada Technical specifications were met.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:04:07 23:09:56Z
Modify Date                     : 2004:04:07 16:10:51-07:00
Page Count                      : 2
Creation Date                   : 2004:04:07 23:09:56Z
Mod Date                        : 2004:04:07 16:10:51-07:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : HZhao
Metadata Date                   : 2004:04:07 16:10:51-07:00
Creator                         : HZhao
Title                           : Microsoft Word - WS4979.doc

EXIF Metadata provided by EXIF.tools