Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2869628 |
| Application ID | ITutbsCzFTMq88ynw8AUwg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 181.69kB (2271163 bits) |
| Date Submitted | 2016-01-12 00:00:00 |
| Date Available | 2016-01-14 00:00:00 |
| Creation Date | 2016-01-04 16:19:59 |
| Producing Software | Adobe Acrobat Pro 11.0.13 |
| Document Lastmod | 2016-01-04 16:19:59 |
| Document Title | Users Manual |
| Document Creator | Adobe Acrobat Pro 11.0.13 |
Inside the Box Touchscreen LCD 1 WAN 2 LAN Reset Button Power Connector Stylus 12V, 1A Power Adapter Ethernet Cable The setup process consists of a few simple steps: 1) Connect Almond to the Internet in “Router” or “Range Extender” mode. 2) Setup your Almond Account to enable remote access for your sensors. Router Setup 1) Unplug the AC adapter & Ethernet cables of your Internet modem (Cable, DSL or Fiber). If your modem has a battery remove it. 2) Wait for 1 minute. If your modem has a battery re-insert it. Plug the AC adapter of the modem back into the power outlet. 3) Wait for 1 minute. Plug the AC adapter of Almond into the power outlet. 4) Follow the on the screen instructions on the Almond’s Touch Screen. Range Extender Follow the on-screen instructions on the Almond’s Touch Screen. Setup your Almond Account 1. From iTunes or Google Play, download and install the 'Almond' app from Securifi. 2. Create an Almond account and then login. 3. On your Almond router LCD screen, tap on the 'Almond Account' tile. 4. Tap on the 'Get Code' button on the screen and note down the six letter code displayed on the screen. 5. On your Almond app tap on the top left menu button to access the side bar, and then tap on Add. 6. Enter the 6-letter code and tap the 'Link Almond' button. 7. Your Almond is now connected to the mobile app. Troubleshooting 1) How can I change the Wireless Network (SSID) name an password? You can edit these settings in the “Wireless” app on the LCD. 2) I just finished setting up the Range Extender. Why am I not seeing any improvement in the Range? Please note that the Range extender by default creates a new wireless network with Almond appended to your original network’s name. 3) Can I have the same name for the extended network as my main network? Yes, you can change the network name in the “Wireless” app on the LCD. 4) In the range extender mode, Almond was unable to connect though I am close to the main Router. Some routers don’t allow you to connect to range extenders. Please try using the “Wireless WAN” app on the LCD for such routers. Join our Forums Get the most of your Almond and learn from the Pros in our Forums. We also have sensor giveaways from time to time. http://forum.securifi.com For more Information visit https://www.securifi.com/qsg/almond support@securifi.com 1-855-969-7328 (US & Canada) +44-800-078-6277 (UK) +49-800-723-7994 (Deutsch) +33-805-080-447 (Français) +971-800035704234 (UAE) +800-101-3371 (Singapore) 台灣 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:01:04 16:19:59+08:00 Creator : Adobe Acrobat Pro 11.0.13 Modify Date : 2016:01:04 16:19:59+08:00 Title : XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2016:01:04 16:19:59+08:00 Creator Tool : Adobe Acrobat Pro 11.0.13 Format : application/pdf Document ID : uuid:32bb5000-be9b-4e3a-96f7-c7028f72b205 Instance ID : uuid:7d010750-9b55-40fe-994e-51142e661398 Producer : Adobe Acrobat Pro 11.0.13 Page Count : 6 For : Jim, Bounding Box : 32 -1641 314 -11 Container Version : 11 Creator Version : 15EXIF Metadata provided by EXIF.tools