See Me Here Electronic BV500 bluetooth speaker User Manual
Shenzhen See Me Here Electronic Co., Ltd. bluetooth speaker
User Manual
尺寸:80*104mm 材质:80g书写纸 折页 BV500 SEE ME HERE Outdoor water resistant Bluetooth Speaker Packing Content ⑤ power on/off ① Warnings Micro USB interface Connect and Play External interfaces ⑥ Play Music on TF Card Features Product specifications W142 × D70 × H46 (mm) ⑦ External Audio Playing 2 USB cable: 1pcs ⑦ Enter Card Reader / Charging Mode 3 Lanyard: 1pcs ⑧ Chapter 3: Troubleshooting SEE ME HERE BV500 Outdoor water resistant Bluetooth Speaker Getting to Know Shenzhen See Me Here Electronic Co.,Ltd. District,Shenzhen City,Guangdong Province,China Warnings 1 Master unit: 1 pcs 4 3.5mm audio cable: 1pcs ● Please use and store this product at room temperature; ● Do not expose this product to rain or wet conditions; ● Do not throw and drop this product, avoid damage; TF card (MAX 32G) Power supply Built-in 1200mAh lithium battery Output power 3W*2 THD = 10% Frequency response 110Hz--18KHz USB specification USB2.0, compatible with USB1.1 Charging time DC5V Audio play time Around 6 hours at Mid-volume, around 3.5 hours at MAX-volume Functions BT: press and hold it to disconnect the Bluetooth, and press it to connect the last connected Bluetooth device. Power: same as the Mode button; press and hold for 2 seconds to turn on/off. Call: if there is incoming call in BT state, press this button to answer the call, or press and hold it to reject; during the call, press it to end. MP3, WMA, WAV,APE,FLAC ◆ Support Aux In play; TF card music playback AUX port: 3.5MM Audio cable jack ◆ Support iOS power display; Bluetooth play Yes ◆ Support TF card reader data access; TF card reader Support data access Reset hole: Reset the device with thin stick when the speaker halted ◆ Support Bluetooth hands-free bi-directional conversation; External audio source Aux In ◆ Output power is 3W*2; ◆ Built-in 1200mAh lithium battery, built-in intelligent power management module; ◆ Support TF card lossless MP3 /WMA / WAV / FLAC / APE format audio playback.。 ① External audio playing USB port: data transfer/charging Bluetooth connection One key reconnect Power level display Support iOS power display Ringtone Support ringtone playback APP Yes ② Playing music on TF card TF card slot: insert a TF card and play the audio file, or connect to PC and read the data on the card ③ Connect to the speaker Connect to playback device ④ This device complies with part 15 of the FCC Rules. Operation is subject 产品参数 Troubleshooting to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause Insert a TF card and turn on the device Insert a TF card with music files into the card slot, press and hold the Power button to turn on the speaker, accompanied by a ding-dong sound. 1 Press and hold for 2 seconds to turn on/off the speaker Audio cable 1 Connecting audio cable Press and hold the Power button to turn on the speaker, insert the audio cable after the ding-dong sound, and press the Mode switch button Press and hold for 2 seconds to turn on the speaker, the speaker makes a ding dong sound, and the blue LED starts flashing; press and hold for 2 seconds again to turn off the speaker. Switch to TF music mode to switch to Aux In mode; you can also insert the audio cable in power on state to realize plug and play. Fault Pairing failed repeatedly , and the speaker will make Entering card reader/charging mode Turn on Bluetooth on the mobile phone, tablet PC TF card error format error 1. Check if the TF format is proper (speaker supports FAT32 format) 2. Check if the file formats of the TF card are WAV, WMA, MP3, APE or FLAC After pairing successfully, the device makes ding-dong-ding sound, the blue LED stays, and then you can select and play music files on mobile phone or tablet PC. Hands-free call 2. The Bluetooth speaker will connect to the last paired device automatically (when turned on) 1. If necessary, type “0000” and tap OK to connect No sound during playing Tip: BT is the default mode of the Bluetooth speaker; if want to play music on TF card, switch to TF mode first; if the speaker is turned on, the files on the Copy music 1. Check if the speaker volume is adjusted properly 2. Check if the speaker is or paused Can’t turn on the speaker 1. Restart the speaker, use the reset function No reaction 1. Restart the speaker,use the reset function Turn off the speaker, insert the TF card, connect the speaker to PC with the USB cable via Micro USB interface, press the Power button to enter When the speaker and the device are connected, press and hold to disconnect the Bluetooth connection, accompanied by a thud sound; the speaker is available for connect now and the blue LED starts flashing. Bluetooth reconnection When the Bluetooth is disconnected, you can tap paired device, and tap to play last song. ⑤ to connect to last Connecting speaker and mobile phone We the speaker connected to you smart phone,if there is an a separate DC5V phone and charge the speaker through indoor outlet. to answer the call and press it again to end the call; or press and hold to reject the call ⑥ 1A USB charger or other 5V1A charger for mobile Tip: Please charge the speaker first if it hasn’t been used for a long time. ⑦ installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposu requirement. condition The ⑧ device without FCCID: 2ABNJ-BV500 You can connect the speaker to PC with the provided USB cable and charge the speaker no matter it's power on/off. It is recommended to buy coming call, the music will pause and the "dudu" sound is ring, harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not exposure Charging the speaker press These limits are designed to provide reasonable protection against re card reader mode, and then you can copy music files to the TF card. Disconnect Bluetooth device undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. the music files on TF card. TF card will be played automatically when the card is inserted. 2. If your device requires code, type 0000 1. Check if the device is out of effective range, or if there is barrier between speaker and the device or other devices, search for Bluetooth device 3 Successfully connect to Bluetooth and play Solution 1. Turn off the speaker and restart it Music play interrupted Press the Mode switch button a dong-dong sound and play “BV500”, and then tap Connect to confirm. Mode: press it to switch among BT, TF and AUX Bi-directional conversation 2 Bluetooth connection 1A around 3 hours Play/Pause: press it in playing state to play/pause File format ①. Note: Improper battery replacement may cause explosion; only replace with same or equivalent battery. ②. Do not expose the battery to sunlight, fire or excessive heat. Connect to other Bluetooth devices BV500 Bluetooth 4.0 Voice call Press and hold for 2 seconds to turn on/off the speaker Devices Features Storage type TF card playback District,Shenzhen City,Guangdong Province,China OFF Touch the button to adjust ◆ Bluetooth 4.0 , faster data transfer, lower power consumption; Address: 3-4th Floor,Building D,TongFuYu Industrial Park,Xixiang Town,Bao'an Bluetooth 3W*2 + Bass radiator Volume control mode ◆ Support one-key to reconnect; 1A); volume appropriately when listening, especially for long time listening; Bluetooth Portable Bluetooth speaker Speaker system ● Do not self-dismantle, repair and transform the product; ● Unauthorized dismantlement will void the warranty. Devices Features Mic ● Only charge with a rated voltage charger(DC5V ● Long time high volume may cause hearing impairment; please adjust the BV500 5 Manual : 1pcs LED mode indicator Next/VOL+: press it to switch to next track, press and hold it to turn up the volume Basic parameters Technical parameters Manufacturer: Previous/VOL-: press it to switch to previous track, press and hold it to turn down the volume 395g (including built-in lithium battery) www.see-me-here.com Address: 3-4th Floor,Building D,TongFuYu Industrial Park,Xixiang Town,Bao'an Shenzhen See Me Here Electronic Co.,Ltd. Net Weight Product type Chapter 2: Getting Started ④ Keys and Components Keys and Components TF card slot AUX external audio interface Hands-free Call ③ Parameters Manufacturer: Getting Started Appearance Chapter 1:Getting to Know ② Packing Content www.see-me-here.com 产品参数 Parameters Contents can restriction. be used in portable
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 1 Create Date : 2016:06:25 08:50:47+08:00 Modify Date : 2016:06:25 08:50:47+08:00 Producer : Corel PDF Engine Version 17.1.0.572 Author : Administrator Creator : CorelDRAW X7 Title : BV500 英文说明书 2016-6-24 (确认版加FCC).cdrEXIF Metadata provided by EXIF.tools