Seiko Epson AP008 GPS Wearable Watch User Manual ProSense17 QSG E CPD54143 2pages indd

Seiko Epson Corporation GPS Wearable Watch ProSense17 QSG E CPD54143 2pages indd

User manual

GPS Running WatchQuick Start GuideButtons 1Charging the Watch 2Setting Up the Watch and App17Make sure to read the Notices sheet and online User’s Guide before using the product to ensure safe use.BackStart/StopUpEnterDownUse the included USB charging clip to charge the watch.1 Connect the USB charging clip to the watch.2 Connect the USB cable to your PC or the optional AC adapter.Make sure the watch is fully charged before you remove the clip. The Settings screen appears on the watch after you remove the USB charging clip.1 On the watch, select your language and press Enter.2 Select Set by Phone and press Enter.Note: You can also use a PC to congure the watch or you can congure the watch on its own. See the online User’s Guide for more information.3 Download and install the Epson View app from your smartphone’s app store.4 Launch the Epson View app and create an account or log in. After you nish this process, the initial Settings screen appears on your smartphone.3Using Your Watch Selecting a Workout Mode1 Press down on the Time screen to display the workout mode screen.Note: You can press Start/Stop on the Time screen to quickly start a workout.2 Press up or down to select the desired activity.The following workout modes are available:Run Walk Treadmill 3 Press Start/Stop while outdoors with no obstacles overhead to start GPS calibration. You can start your workout when the Measurement screen appears.For increased GPS accuracy, wait at least 15 minutes before starting your workout. You only need to perform this extended GPS calibration the rst time you use the watch or if you do not use it for a few months.Note: If you see the message below, do one of the following:• Move to an area with no obstructions overhead and then press back to restart GPS calibration.• Press Enter to start the workout. Distance traveled will be estimated until the GPS signal is fully acquired.Starting a WorkoutPress Start/Stop on the Measurement screen to start a workout.Note: You can press Enter during a workout to start and record a new lap.Press up or down during a workout to change the measurements that appear. See the online User’s Guide for more information.5 Note the code that appears on the watch.6 Select ProSense 17 from the list on your smartphone, then follow the instructions to pair your watch and your phone. The Time screen appears on the watch when the process is complete.Note: You can pair the watch with your smartphone at any time by selecting My Watch in the Epson View app.
Checking Daily Activity DataAdditional TipsSaving a Workout1 Press Start/Stop to pause the workout.2 Select Save and then press Enter. The workout summary appears.3 Press up and down to scroll through the workout summary.4 Press Enter to return to the Time screen.Viewing Your Workout History1 On the Time screen, press Enter and select History.2 Select the desired workout and then press Enter. The workout data appears.3 Press up and down to scroll through the workout summary.Note: To return to the Time screen, press and hold back.Press up on the Time screen to display the distance traveled, number of steps, calories burned, and sleep time for the current day.Press Enter on the Track Activity screen to display a graph of your weekly activity including the current day.Press back to display the previous screen.• To turn the watch on or o, press and hold Start/Stop.• To return to the Time Screen at any time, press and hold back.• To start a new lap during a workout, press Enter.• To turn on the backlight during a workout, press back.3Using Your Watch (Continued) Updating the Firmware Caring for Your Watch Where to Get HelpYou can update your watch’s rmware from the Epson View app. Select My Watch, then select the arrow next to the rmware version to update your watch.You can also visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to download the latest rmware.To check the version of the rmware on your watch, press Enter on the Time screen and then select Settings > System > Ver. Info.Your ProSense product is made from materials commonly used in watches and other consumer products. Since you may wear your product over extended periods, including when you are exercising and sweating, it is important that you take care of your skin and your product according to these instructions. Prolonged wearing of your product without proper care could lead to skin irritation or rash.Please follow the precautions below to ensure full enjoyment and benet of your ProSense product:• Keep your product and skin clean.• Keep your product and skin dry.• Give skin a rest and some air.Proper wear and care of your product is an important part of your enjoyment of this product. Make sure to see the online User’s Guide for more detailed information on caring for your product.Internet SupportVisit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product to nd solutions to common problems. You can get tips, usage information, and FAQs, download utilities, view the User’s Guide, or e-mail Epson.Telephone SupportCall (800) 241-5789, (562) 276-4394 (U.S.), or (905) 709-3839 (Canada). Support hours are 6 am to 8 pm, Pacic Time, Monday through Friday, and 7 am to 4 pm, Pacic Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.The Bluetooth wordmark is owned by Bluetooth SIG, Inc.General Notice: Other product names used herein are for identication purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.This information is subject to change without notice.© 2017 Epson America, Inc., 5/17Printed in China CPD-54143

Navigation menu