Seiko Epson AP008 GPS Wearable Watch User Manual ProSense17 QSG E CPD54143 2pages indd
Seiko Epson Corporation GPS Wearable Watch ProSense17 QSG E CPD54143 2pages indd
User manual
GPS Running Watch
Quick Start Guide
Buttons 1Charging the Watch 2Setting Up the Watch and App
17
Make sure to read the Notices sheet and online User’s Guide
before using the product to ensure safe use.
Back
Start/Stop
Up
Enter
Down
Use the included USB charging clip to charge
the watch.
1 Connect the USB charging clip to the watch.
2 Connect the USB cable to your PC or the
optional AC adapter.
Make sure the watch is fully charged before
you remove the clip.
The Settings screen appears on the watch after
you remove the USB charging clip.
1 On the watch, select your language and
press Enter.
2 Select Set by Phone and press Enter.
Note: You can also use a PC to congure the
watch or you can congure the watch on
its own. See the online User’s Guide for more
information.
3 Download and install the Epson View app
from your smartphone’s app store.
4 Launch the Epson View app and create
an account or log in. After you nish this
process, the initial Settings screen appears
on your smartphone.
3Using Your Watch
Selecting a Workout Mode
1 Press down on the Time screen to display
the workout mode screen.
Note: You can press Start/Stop on the
Time screen to quickly start a workout.
2 Press up or down to select the
desired activity.
The following workout modes are available:
Run Walk Treadmill
3 Press Start/Stop while outdoors with no
obstacles overhead to start GPS calibration.
You can start your workout when the
Measurement screen appears.
For increased GPS accuracy, wait at least 15
minutes before starting your workout. You
only need to perform this extended GPS
calibration the rst time you use the watch
or if you do not use it for a few months.
Note: If you see the message below, do one
of the following:
• Move to an area with no obstructions
overhead and then press back to
restart GPS calibration.
• Press Enter to start the workout.
Distance traveled will be estimated until
the GPS signal is fully acquired.
Starting a Workout
Press Start/Stop on the Measurement
screen to start a workout.
Note: You can press Enter during a
workout to start and record a new lap.
Press up or down during a workout to
change the measurements that appear. See
the online User’s Guide for more information.
5 Note the code that appears on the watch.
6 Select ProSense 17 from the list on your
smartphone, then follow the instructions to
pair your watch and your phone.
The Time screen appears on the watch when
the process is complete.
Note: You can pair the watch with your
smartphone at any time by selecting My
Watch in the Epson View app.
Checking Daily Activity Data
Additional Tips
Saving a Workout
1 Press Start/Stop to pause the workout.
2 Select Save and then press Enter.
The workout summary appears.
3 Press up and down to scroll through
the workout summary.
4 Press Enter to return to the Time screen.
Viewing Your Workout History
1 On the Time screen, press Enter and
select History.
2 Select the desired workout and then press
Enter. The workout data appears.
3 Press up and down to scroll through
the workout summary.
Note: To return to the Time screen, press
and hold back.
Press up on the Time screen to display the
distance traveled, number of steps, calories
burned, and sleep time for the current day.
Press Enter on the Track Activity screen to
display a graph of your weekly activity including
the current day.
Press back to display the previous screen.
• To turn the watch on or o, press and hold
Start/Stop.
• To return to the Time Screen at any time, press
and hold back.
• To start a new lap during a workout, press
Enter.
• To turn on the backlight during a workout,
press back.
3Using Your Watch (Continued) Updating the Firmware Caring for Your Watch Where to Get Help
You can update your watch’s rmware from the
Epson View app. Select My Watch, then select
the arrow next to the rmware version to update
your watch.
You can also visit www.epson.com/support
(U.S.) or www.epson.ca/support (Canada) and
search for your product to download the latest
rmware.
To check the version of the rmware on your
watch, press Enter on the Time screen and
then select Settings > System > Ver. Info.
Your ProSense product is made from materials
commonly used in watches and other consumer
products. Since you may wear your product
over extended periods, including when you
are exercising and sweating, it is important that
you take care of your skin and your product
according to these instructions. Prolonged
wearing of your product without proper care
could lead to skin irritation or rash.
Please follow the precautions below to ensure
full enjoyment and benet of your ProSense
product:
• Keep your product and skin clean.
• Keep your product and skin dry.
• Give skin a rest and some air.
Proper wear and care of your product is an
important part of your enjoyment of this
product. Make sure to see the online User’s Guide
for more detailed information on caring for your
product.
Internet Support
Visit www.epson.com/support (U.S.) or
www.epson.ca/support (Canada) and search
for your product to nd solutions to common
problems. You can get tips, usage information,
and FAQs, download utilities, view the User’s
Guide, or e-mail Epson.
Telephone Support
Call (800) 241-5789, (562) 276-4394 (U.S.), or
(905) 709-3839 (Canada). Support hours are
6
am
to 8
pm
, Pacic Time, Monday through Friday,
and 7
am
to 4
pm
, Pacic Time, Saturday. Days and
hours of support are subject to change without
notice. Toll or long distance charges may apply.
EPSON is a registered trademark and EPSON Exceed Your Vision
is a registered logomark of Seiko Epson Corporation.
The Bluetooth wordmark is owned by Bluetooth SIG, Inc.
General Notice: Other product names used herein are for
identication purposes only and may be trademarks of their
respective owners. Epson disclaims any and all rights in those
marks.
This information is subject to change without notice.
© 2017 Epson America, Inc., 5/17
Printed in China CPD-54143