Seiko Epson FBJ26H005 11ac+BT Combo Module User Manual rev

Seiko Epson Corporation 11ac+BT Combo Module Users Manual rev

Users Manual rev.pdf

COMPANY CONFIDENTIAL 1FuGui Precision Industrial (Nanning) Co., LTD. No.51, Tongle Boulevard, Shajing, Jiangnan District, Nanning, P. R. CHINA Tel: 86-0771-2168888 Ext:30726 FAX: 86-0771-2168888 Ext:64886 Function 802.11b/g/n/ac 1x1 WLAN + Bluetooth Combo moduleProject Name RTL8821CU 11ac+BT Combo module Part No. J26H005 Delivery Specification Rev. 1.0 Prepared by Reviewed by Approved by J26H005 Delivery Specification
COMPANY CONFIDENTIAL 2 Content 0. REVISION HISTORY ........................................................................ 31. INTRODUCTION ........................................................................... 41.1 SCOPE ................................................................................... 41.2 FUNCTION ................................................................................ 41.3 SPECIFICATION BY MODEL ................................................................... 51.4 MODULE WEIGHT .......................................................................... 51.5 PRODUCT REGULATORY ..................................................................... 52. MECHANICAL SPECIFICATION ............................................................. 62.1 MODULE MECHANICAL DRAWING .............................................................. 62.2 WTB CONNECTOR ......................................................................... 72.3 RF SWITCH CONNECTOR .................................................................... 83.WTB CONNECTOR PIN-OUT................................................................. 85. ELECTRICAL SPECIFICATION .............................................................. 95.1 RECOMMENDED OPERATING CONDITION ........................................................ 95.2 RF CHARACTERISTICS ...................................................................... 95.3 CURRENT CONSUMPTION ................................................................... 115.4 EFUSE CONTENT .......................................................................... 125.5 POWER ON/OFF SEQUENCE ................................................................. 145.6 FLOATING PIN STATUS ...................................................................... 165.7 ANTENNA SPECIFICATION ................................................................... 165.8 OPERATING SYSTEM SUPPORT .............................................................. 186. LABEL INFORMATION .................................................................... 196.1 MAC-ID LABEL LASER MARKING ............................................................. 196.2 REGULATORY LABEL ....................................................................... 196.3 PANEL LABEL ............................................................................. 206.4 CARTON LABEL ........................................................................... 206.5 PALLET LABEL ............................................................................ 217. PACKING INFORMATION .................................................................. 217.1 MODULE SCAN GUIDE ...................................................................... 238. RELIABILITY ............................................................................. 248.1 HARDWARE RELIABILITY TEST ............................................................... 248.2 PACKAGE RELIABILITY TEST (TBD) ........................................................... 259. QUALITY ................................................................................. 259.1 QC FLOW CHART ......................................................................... 259.2 VISUAL INSPECTION STANDARD .............................................................. 269.3 PVT MFG. TEST PLAN ..................................................................... 26
COMPANY CONFIDENTIAL 3 0. Revision History Date Document revision Version Author Change Description 2017/08/11 1.0 NA Fly Huang Initial released
COMPANY CONFIDENTIAL 4 1. Introduction Project Name: J26H005 This documentation describes the engineering requirements specification of RTL8821CU (WLAN/BT) Combo Module. It is a confidential document of Foxconn. 1.1 Scope This module design is based on Realtek solution RTL8821CU chipset. The RTL8821CU is a highly-integrated IEEE 802.11a/b/g/n/ac (1T1R) MAC/Baseband/RF WLAN and Bluetooth Baseband/RF single chip. For Wireless LAN (WLAN) operation, it supports 1-stream 802.11ac solution with Multi-user MIMO (Multiple-Input, Multiple-Output) STA mode with USB2.0 network interface controller. For Bluetooth operation, it supports Bluetooth 2.1/4.2 with USB interface controller. This module support antenna diversity for better coverage. This specification is applied at the product to deliver to Seiko Epson group (including an overseas subsidiary),and EMS, the outsourcer to utilize in the company. 11ac combo module block diagram 1.2 Function z USB2.0 interface for WLAN and BT. z Support dual-band WLAN 20MHz at 2.4GHz and 20/40/80 MHz at 5GHz z Support BT4.2+HS , BLE and be backwards compatible with BT1.x,2.x+EDR. z Support BT-WLAN coexistence. z Support Antenna diversity. z GP compliance In accordance with SEIKO EPSON Group's requirements specified by the latest “Green Purchasing Standard for Production Materials", all production materials shall conform to SEIKO Epson’s policy about chemical substances already banned or to be eliminated and shall be controlled by "4M Variation Management".
COMPANY CONFIDENTIAL 51.3 Specification by Model LOT No. EPSON Parts Name EPSON Parts Code Foxconn Parts Name Connecter Regulatorycountries US W I RemarkJ26H005.C01 2187149-00 J26H005.00 WTB (Right Angle) None A 0 A A PVT 1.4 Module Weight Model J26H005 Sample 1 2.7g Sample 2 2.7g Sample 3 2.7g 1.5 Product Regulatory Regulatory countries/IDs Country Approval Certification Certification No. Remark USA FCC TBD Canada IC TBD EU CE TBD Japan TELEC TBD
COMPANY CONFIDENTIAL 62. Mechanical Specification 2.1 Module Mechanical Drawing Typical module dimension (W x L): 28mmx28mm. Top view Bottom view The tolerance for the module mechanical dimension Note1: The max shift degree of WTB connector is 2.3degree.
COMPANY CONFIDENTIAL 72.2 WTB Connector ¾ 4pin, 2.0mm pitch, Right angle type ¾ Part number: HFK2040-G1C3K-8F ¾ Vendor: Foxconn FIT ¾ High temperature plastic PA9T which meet SMT reflow profile(PIP) ¾ The shifter degree in worst case is 2.3 degree.
COMPANY CONFIDENTIAL 8 2.3 RF Switch Connector ¾ Part number: MM8030-2610RJ3 ¾ Vendor: Murata 3.WTB Connector Pin-out Pin Number Pin Name I/O Description Voltage 1 VDD33 I 3.3V source 3.3V 2 USB_DN I/O USB D- Signal -- 3 USB_DP I/O USB D+ Signal -- 4 GND -- Ground --
COMPANY CONFIDENTIAL 9 5. Electrical Specification 5.1 Recommended Operating Condition Symbol Condition Min. Typ. Max Unit3.3v(VDD33) Respect to GND 3.0 3.3 3.6 V Max Ripple on Supplied Voltage 3.3V @full loading 110 330 mVppDC current @3.3V at full loading (WiFi @TX and BT @ TX) Avg. - 330 400 mA USB Suspend current 2.0 10 mA Operating Temperature 0 +25 +70 ℃ Storage Temperature -25 25 +85 ℃ Operating Humidity 30~50% 90% RH ESD HBM(contact) Standard:MIL-STD-883H +/-1.5 KV ESD (indirect) Standard:EN61000-4-2 +/-4 KV Function operation is not guaranteed outside of this limit, and operation outside of this limit for extended period can adversely affect long-term reliability of the device. 5.2 RF Characteristics All typical performance specification are measured at RF connector port operating in +25℃@3.3V Note2: The target power table is just defined for board level. WiFi Standard IEEE802.11a/b/g/n/ac Data Rate 802.11b: 11, 5.5, 2, 1 Mbps; 802.11 a/g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: HT20 mode: MCS0~MCS7,up to 72.2Mbps HT40 mode: MCS0~MCS7,up to 150Mbps 802.11ac: VHT20 mode:MCS0~MCS8, up to 86.7Mbps VHT40 mode: MCS0~MCS9, up to 200Mbps VHT80 mode :MCS0~MCS9, up to 433.3Mbps Bandwidth 20MHz for 2.4GHz, 20MHz, 40MHz, 80MHz for 5GHz Modulation Techniques 802.11b: CCK, DQPSK, DBPSK 802.11a/g: 64QAM,16QAM, QPSK, BPSK 802.11n: 64QAM,16QAM, QPSK, BPSK 802.11ac: 256QAM,64QAM,16QAM, QPSK, BPSK Operating Frequency 2.412GHz~2.462GHz, 5.18 ~ 5.24GHz, 5.26 ~ 5.32GHz, 5.5~5.70GHz, 5.745 ~ 5.825GHz Media Access Control CSMA/CA with ACK
COMPANY CONFIDENTIAL 10 Transmit Output Power 2.4GHz: 11b CCK_11Mbps: 21dBm+/-1.5dB 11g 54Mbps: 25 dBm +/-1.5dB 11n HT20_MCS7: 24 dBm +/-1.5dB 5GHz: 11a 54Mbps: 20 dBm +1.5/-2dB 11an HT20_MCS7: 20 dBm +1.5/-2dB HT40_MCS7: 20 dBm +1.5/-2dB 11ac VHT80_MCS7: 20 dBm +1.5/-2dB VHT80_MCS9: 20 dBm +1.5/-2dB Frequency error 2.4GHz: +/-10ppm 5GHz:+/-10ppm Receiver Sensitivity 2.4GHz: 11b 11Mbps: -83dBm@PER<=8% 11g 54Mbps: -70dBm@PER<=10% 11n HT20 MCS7: -67dBm@PER<=10% 5GHz: 11a 54Mbps: -70dBm@PER<=10% 11n HT20 MCS7: -67dBm@PER<=10% 11n HT40 MCS7: -64dBm@PER<=10% 11ac VHT80 MCS9: -52dBm@PER<=10% BT Radio Modulation FHSS Operating Frequency 2.402GHz ~ 2.480GHz Channel Numbers 79 channels with 1MHz BW BDR Transmitter Output Power 0~+10Bm BDR Power Control 2dB≤Power Control Step≤8dB BDR Initial Carrier Freq. Tolerance ≤ ± 75 kHz BDR Carrier Frequency Drift Drift Rate/50us <±20kHz DH1: +/- 25kHz,DH3: +/- 40kHz,DH5: +/- 40kHz BDR Modulation Characteristics 140kHz ≤ ∆f1avg ≤175kHz ∆f2max ≥115kHz ∆f2avg/∆f1avg ≥0.8 BDR Maximum Receiver Signal -20dBm@ BER <= 0.1% at 1Mbps BDR Sensitivity -85dBm @BER <= 0.1% at 1Mbps EDR Relative Power P[GFSK]-4dB<P[DPSK]< P[GFSK]+1dB EDR Stability and Mod Accuracy -75 kHz <ωi < 75 kHz -10kHz<ω0 <10kHz RMS DEVM<=0.13 for all 8DPSK @3Mbps Peak DEVM<=0.25 for all 8DPSK @3Mbps 99% DEVM<=0.2 for 99% 8DPSK @3Mbps BDR Frequency Range FL>2.4GHz,FH<2.4835GHz EDR Sensitivity -80dBm@BER <= 0.01% at 2Mbps -80dBm@BER <= 0.01% at 3Mbps BDR TX Output Spectrum -20dB Bandwidth ≤1MHz LE Output Power 0~+12dBm LE Modulation Characteristics 225kHz ≤ ∆f1avg ≤275kHz; ∆f2max ≥185kHz for at least 99.9% test packets; ∆f2avg/∆f1avg ≥0.8 LE Carrier frequency offset and drift Carrier frequency offset: ±150kHz Carrier Drift: ≤50kHz Drift rate: ≤20kHz/50us LE Receiver Sensitivity -90dBm@PER <= 30.8%,GFSK,1Mbps
COMPANY CONFIDENTIAL 11 5.3 Current consumption 5.3.1 WiFi current consumption Remark: Base-on Win7 OS to do WiFi only throughput tests. The standby mode means module connect to AP only, and don’t transfer the data. 5.3.2 Bluetooth current consumption Test Condition Current at 3.3V Unit Min Typ. MaxIdle mode( power on only) 79 BT BDR 1DH5 TX@6dBm 149 mA BT BDR 1DH5 Rx 120 mA BT EDR 2DH5 TX@6dBm 150 mA BT EDR 2DH5 Rx 120 mA BLE TX@6dBm 110 mA BLE Rx 120 mA Standby mode 92 mA Remark: The result is base-on Win7 driver. The Idle mode means “ module power on only, don’t open any testing tool” The standby mode means “module connect to BT device only, and don’t transfer the data”
COMPANY CONFIDENTIAL 12 5.4 eFuse Content 5.4.1 WiFi eFuse Revision Note EEPROM Version Chang Lists Owner Date Remark address Value for WiFi Efuse address 0xC4, change value from 0x00 to 0x01 Fly. Huang 2017/08/11 PVT 0xC4 0x01 efuse for WiFi Efuse address Description Remarkaddress 0 1 2 3 4 5 6 7 8 9 A B C D E F 0x00~0F fixed value0 29 8100BC090021006E 04A4341000300B1 26 26 26 27 29 29 28 29 2A 2B 2C 02 FF FF FF FF 0x10h~15h Path A 2.4G cck TX calibration power index2 FFFF28272727242424 25 25 26262626 263 02 FFFFFFFFFF1C FF FF FF 28 28 28 28 28 28 0x16h~1Ah Path A 2.4G 2.4G 11n HT40 MCS7 TX calibration power index4 28 282828 2802FFFFFF FF FFFFFFFFFFFF5 FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFF 0x1Bh path A 2.4G power diff index. fixed value(0x02)6 FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFF Bit[0:3]: the power index difference between OFDM and HT407 FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFF Bit[4:7]: the power index difference between HT20 and HT408 FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFF9 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x22h~2Fh Path A 5G 11n HT40 mcs7 TX calibration power indexA FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFFB FF FFFFFFFFFFFFFF7F 20 1A00FFFFFF FF 0x30h path A 5G power diff index. fixed value(0x02)C FF2900C00100000000 FF20FFFFFFFFFF Bit[0:3]: the power index difference between OFDM and HT40D FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFF Bit[4:7]: the power index difference between HT20 and HT40E FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFFF FF FFFFFF FFFFFFFF FF FF FF FFFFFFFF FF 0x36h path A 5G power index difference between 11ac and HT40 fixed value(0x1C)10 DA 0B 20 C8 E3 46 02 A8 6B AD 71 90 81 09 03 52Bit[0:3]: the power index difference between VHT160 andHT4011 65 61 6C 74 65 6B 0E 3 38 30 32 2E 31 31 61 63 Bit[4:7]: the power index difference between HT20 and HT4012 20 4E 49 43 08 03 31 32 33 34 35 36 FF FF FF FF13 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x3Ah~3Fh Path B cck TX power calibration index14 FF FF FF FF 00 00 31 0F FF FF FF FF FF FF FF FF15 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x40h~44h Path B 11n HT40 mcs7 TX calibration power index16 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF17 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x45h path A 5G power diff index fixed value(0x02)18 FF FF FF FF FF FF FF FF E1 21 A9 8D 97 1D 8D 9119 25 CF 88 31 C0 0A 00 00 FC 8C 00 11 9B 14 00 0A 0xB8h channel plan:0x7F fixed value(0x7F)1A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xB9h Crystal calibration data1C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xBAh Thermal meter1E FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xC3h Antanna setting fixed value0xC4h EEPROM version: 0x01 fixed value0xCAh RFE Type fixed value0x100~101h VID:0x0BDA fixed value0x102~103h PID:0xC820 fixed value0x104 for USB eye diagram optima fixed value0x107~10Ch WiFi MAC: A86BAD719081 confirm consistency with label0xC1~0xC2 other config fixed value0xC4~0xC80x105~0x1060x10D~0x12B
COMPANY CONFIDENTIAL 13 Note: USB Vendor ID (VID): 0x0BDA USB Product ID (PID): 0xC820 5.4.2 BT eFuse
COMPANY CONFIDENTIAL 14 efuse for BTaddress 0 123 456 7 8 9ABCDEF0 FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF1 FFFFFFFFFF FFFFFF FFFF FFFF FFFFFFFF Efuse address description Value Remark2 FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF3 FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF 0x44~0x49 BT MAC address A86BAD719082 Not fixed value4 FFFFFFFF 8290 71AD6BA8FFFF FFFFFFFF5 FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF 0xDA~0xDB default value from IC 10,D8 Fixed value6 FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF 0x1F4~0x1F7 default value from IC 94,80,06,00 Fixed value7 FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF8 FFFFFFFFFF FFFFFF FFFF FFFF FFFFFFFF 0x15B~0x15E BT TX power calibration index Not fixed value9 FFFFFFFFFF FFFFFF FFFF FFFF FFFFFFFF 0x15B 1M power index 1AA FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF 0x15C 2M power index 1BB FFFFFFFFFF FFFFFF FFFF FFFF FFFFFFFF 0x15D 3M power index 1BC FFFFFFFFFF FFFFFF FFFF FFFF FFFFFFFF 0x15E LE power index 1AD FFFFFFFFFF FFFFFF FF FF 10D8 FFFFFFFFE FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF 0x15F BT Tx gain step 01 Fixed valueF FFFFFFFFFF FFFFFF FF FF FFFF FFFFFFFF10 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x188~0x189 BT Thermal value index00,1D Not fixed value11 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF12 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x1CE~0x1CF BT Antenna info 29,C0 Fixed value13 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF14 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x1E4~0x1E5 BT Modem tx gain comp10,32 Not fixed value15 FF FF FF FF FF FF FF FF FF FF 26 1A 1B 1B 1A 0116 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x1E6 BT Xtal cap 20 Not fixed value17 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF18 FF FF FF FF FF FF FF FF 00 1D FF FF FF FF FF FF19 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1C FF FF FF FF FF FF FF FF FF FF FF FF FF FF 29 C01D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1E FF FF FF FF 10 32 20 FF FF FF FF FF FF FF FF FF1F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF20 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF21 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF22 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF23 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF24 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF25 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF26 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF27 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF28 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF29 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2E FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF30 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF31 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF32 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF33 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF34 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF35 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF36 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF37 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF38 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF39 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF3A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF3B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF3C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF3D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF3E FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF3F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5.5 Power On/Off Sequence 5.5.1 Power On Sequence
COMPANY CONFIDENTIAL 15 Ton: The main power ramp up duration Tpor: The power on reset releases and power management unit executes power on tasks Tattach: USB attach state Item Min. Typ. Max Unit Ton -- 1.5 5 ms Tpor -- 2 20 ms Txtal -- 1.5 8 ms Tattach 100 250 -- ms T1v05 0 0 5 ms 5.5.2 Power Off Sequence Toff: The main power ramp down duration(from 3.3V fall to 0.7V) VDD33(3.3V) is coming from system, different DC power supply’s load cap value may cause the different discharge time. Treset: To assert Chip reset, keep the VDD33 under 0.7V for 100ms Item Min. Typ. Max Unit Toff -- 430 1000 ms Treset 100 -- -- ms
COMPANY CONFIDENTIAL 165.6 Floating pin status 5.7 Antenna Specification
COMPANY CONFIDENTIAL 17
COMPANY CONFIDENTIAL 18 5.8 Operating System Support Support the Win7, Win8.1, Win10, Linux operating system on normal driver
COMPANY CONFIDENTIAL 196. Label Information 6.1 MAC-ID Label Laser Marking All content is engraved by laser into shielding cover. 6.2 Regulatory Label Regulatory label was printed on PCB Bottom side for PVT, it will be updated after get the official regulatory ID
COMPANY CONFIDENTIAL 206.3 Panel Label 6.4 Carton Label
COMPANY CONFIDENTIAL 216.5 Pallet Label 7. Packing Information
COMPANY CONFIDENTIAL 22 The detailed dimension of the tray The hollow length and side value/ The distance between module and module,and between module and outline of tray
COMPANY CONFIDENTIAL 237.1 Module Scan Guide 1. Taking the module in declining way about 45° to prevent the shielding reflecting the lightness; 2. Taking the scanner and turning left in 45° angle； Note: The distance between scanner and module is about 5-8cm
COMPANY CONFIDENTIAL 248. Reliability 8.1 Hardware Reliability test
COMPANY CONFIDENTIAL 25 8.2 Package Reliability Test (TBD) The product shall pass below package reliability test plan. No Test Items Description Test Criteria Reference Qty' Result1 Atmospheric Conditioning Test Temlpearture: 38℃Test humidity: 85%R.H.Dwell time: 72hoursNo obvious visible damageon boxes after temperatureand humidity test. ISTA-2A 1carton TBD2 Static Compression TestUnits are packagedCompression load=Wt x (S - 1) x FWt:Total weitht of the packaged-procuctS:Total number of packaged-products in a stack1:Represents the bottom container in a StackCompression Test duration:1hourNo obvious visible damageon boxes after staticcompression test. ISTA-2A 1carton TBD3 Random Vibration TestThe following breakpoints shall be programmed into the vibrationcontroller to produce the acceleration versus frequency profile (spectrum)below with an overall Grm s level of 1.15.Face 3: 30mins, Face1: 10mins, Face 2 or 4: 10mins, Face 5 or 6: 10mins No obvious visible damageon boxes after randomvibration test. ISTA-2A 1carton TBD4Package drop testThe test drop height varies with the weight of the packaged-product.Find the weight of the packaged-product in the following chart todetermine a drop height or an equivalent impact velocity tobe used for a substituted drop:No obvious visible damageon boxes after packageddrop test. ISTA-2A 1carton TBD5 Fix displacement TestDisplacement:25mmDuration:14200times No obvious visible damageon boxes after fixeddisplacement test. ISTA-2A 1carton TBD 9. Quality The product quality must be followed-up by Foxconn factory quality control system. In accordance with SEIKO EPSON Group's requirements specified by the latest “Electronic Component Quality Requirements Standard" and "WiFi+BT Combo Module Quality Requirements Specification Rev.B" , the product shall be managed Quality control. 9.1 QC Flow Chart
COMPANY CONFIDENTIAL 269.2 Visual Inspection Standard 9.3 PVT Mfg. Test Plan Date Version Author Change Description 2017/08/7 1.7 Fly Huang Initial released
COMPANY CONFIDENTIAL 27
COMPANY CONFIDENTIAL 28
COMPANY CONFIDENTIAL 29
COMPANY CONFIDENTIAL 30
COMPANY CONFIDENTIAL 31
COMPANY CONFIDENTIAL 32
COMPANY CONFIDENTIAL 33
FederalCommunicationCommissionInterferenceStatementThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneofthefollowingmeasures:‐ Reorientorrelocatethereceivingantenna.‐ Increasetheseparationbetweentheequipmentandreceiver.‐ Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.‐ Consultthedealeroranexperiencedradio/TVtechnicianforhelp.FCCCaution:Anychangesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytooperatethisequipment.Thistransmittermustnotbeco‐locatedoroperatinginconjunctionwithanyotherantennaortransmitter.RadiationExposureStatement: ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiator&yourbody.
ThisdeviceisintendedonlyforOEMintegratorsunderthefollowingconditions: Theantennamustbeinstalledsuchthat20cmismaintainedbetweentheantennaandusers,andThetransmittermodulemaynotbeco‐locatedwithanyothertransmitterorantenna.Aslongas2conditionsabovearemet,furthertransmittertestwillnotberequired.However,theOEMintegratorisstillresponsiblefortestingtheirend‐productforanyadditionalcompliancerequirementsrequiredwiththismoduleinstalled IMPORTANTNOTE:Intheeventthattheseconditionscannotbemet(forexamplecertainlaptopconfigurationsorco‐locationwithanothertransmitter),thentheFCCauthorizationisnolongerconsideredvalidandtheFCCIDcannotbeusedonthefinalproduct.Inthesecircumstances,theOEMintegratorwillberesponsibleforre‐evaluatingtheendproduct(includingthetransmitter)andobtainingaseparateFCCauthorization. EndProductLabelingThistransmittermoduleisauthorizedonlyforuseindevicewheretheantennamaybeinstalledsuchthat20cmmaybemaintainedbetweentheantennaandusers.Thefinalendproductmustbelabeledinavisibleareawiththefollowing:“ContainsFCCID:BKMFBJ26H005”.Thegrantee'sFCCIDcanbeusedonlywhenallFCCcompliancerequirementsaremet.ManualInformationTotheEndUserTheOEMintegratorhastobeawarenottoprovideinformationtotheenduserregardinghowtoinstallorremovethisRFmoduleintheuser’smanualoftheendproductwhichintegratesthismodule.Theendusermanualshallincludeallrequiredregulatoryinformation/warningasshowinthismanual.IndustryCanadastatement:ThisdevicecomplieswithISED’slicence‐exemptRSSs.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.LeprésentappareilestconformeauxCNRd’ISEDapplicablesauxappareilsradioexemptsdelicence.L’exploitationestautoriséeauxdeuxconditionssuivantes:(1)le
dispositifnedoitpasproduiredebrouillagepréjudiciable,et(2)cedispositifdoitacceptertoutbrouillagereçu,ycomprisunbrouillagesusceptibledeprovoquerunfonctionnementindésirable.RadiationExposureStatement: ThisequipmentcomplieswithISEDradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwithminimumdistance20cmbetweentheradiator&yourbody.Déclarationd'expositionauxradiations:Cetéquipementestconformeauxlimitesd'expositionauxrayonnementsISEDétabliespourunenvironnementnoncontrôlé.Cetéquipementdoitêtreinstalléetutiliséavecunminimumde20cmdedistanceentrelasourcederayonnementetvotrecorps. ThisdeviceisintendedonlyforOEMintegratorsunderthefollowingconditions:(Formoduledeviceuse) 1)Theantennamustbeinstalledsuchthat20cmismaintainedbetweentheantennaandusers,and2)Thetransmittermodulemaynotbeco‐locatedwithanyothertransmitterorantenna.Aslongas2conditionsabovearemet,furthertransmittertestwillnotberequired.However,theOEMintegratorisstillresponsiblefortestingtheirend‐productforanyadditionalcompliancerequirementsrequiredwiththismoduleinstalled. CetappareilestconçuuniquementpourlesintégrateursOEMdanslesconditionssuivantes:(Pourutilisationdedispositifmodule)1)L'antennedoitêtreinstalléedetellesortequ'unedistancede20cmestrespectéeentrel'antenneetlesutilisateurs,et 2)Lemoduleémetteurpeutnepasêtrecoïmplantéavecunautreémetteurouantenne.Tantqueles2conditionsci‐dessussontremplies,desessaissupplémentairessurl'émetteurneserontpasnécessaires.Toutefois,l'intégrateurOEMesttoujoursresponsabledesessaissursonproduitfinalpourtoutesexigencesdeconformitésupplémentairesrequispourcemoduleinstallé. IMPORTANTNOTE:Intheeventthattheseconditionscannotbemet(forexamplecertainlaptopconfigurationsorco‐locationwithanothertransmitter),thentheCanadaauthorizationisnolongerconsideredvalidandtheICIDcannotbeusedonthefinal
product.Inthesecircumstances,theOEMintegratorwillberesponsibleforre‐evaluatingtheendproduct(includingthetransmitter)andobtainingaseparateCanadaauthorization.NOTEIMPORTANTE:Danslecasoùcesconditionsnepeuventêtresatisfaites(parexemplepourcertainesconfigurationsd'ordinateurportableoudecertainesco‐localisationavecunautreémetteur),l'autorisationduCanadan'estplusconsidérécommevalideetl'IDICnepeutpasêtreutilisésurleproduitfinal.Danscescirconstances,l'intégrateurOEMserachargéderéévaluerleproduitfinal(ycomprisl'émetteur)etl'obtentiond'uneautorisationdistincteauCanada. EndProductLabeling Thistransmittermoduleisauthorizedonlyforuseindevicewheretheantennamaybeinstalledsuchthat20cmmaybemaintainedbetweentheantennaandusers.Thefinalendproductmustbelabeledinavisibleareawiththefollowing:“ContainsIC:1052C‐J26H005”. PlaquesignalétiqueduproduitfinalCemoduleémetteurestautoriséuniquementpouruneutilisationdansundispositifoùl'antennepeutêtreinstalléedetellesortequ'unedistancede20cmpeutêtremaintenueentrel'antenneetlesutilisateurs.Leproduitfinaldoitêtreétiquetédansunendroitvisibleavecl'inscriptionsuivante:"ContientdesIC:1052C‐J26H005". ManualInformationTotheEndUserTheOEMintegratorhastobeawarenottoprovideinformationtotheenduserregardinghowtoinstallorremovethisRFmoduleintheuser’smanualoftheendproductwhichintegratesthismodule.Theendusermanualshallincludeallrequiredregulatoryinformation/warningasshowinthismanual.Manueld'informationàl'utilisateurfinalL'intégrateurOEMdoitêtreconscientdenepasfournirdesinformationsàl'utilisateurfinalquantàlafaçond'installeroudesupprimercemoduleRFdanslemanueldel'utilisateurduproduitfinalquiintègrecemodule.Lemanueldel'utilisateurfinaldoitincluretouteslesinformationsréglementairesrequisesetavertissementscommeindiquédanscemanuel. Caution: (i)thedeviceforoperationintheband5150‐5250MHzisonlyforindoorusetoreducethepotentialforharmfulinterferencetoco‐channelmobilesatellitesystems;
(ii)themaximumantennagainpermittedfordevicesinthebands5250‐5350MHzand5470‐5725MHzshallbesuchthattheequipmentstillcomplieswiththee.i.r.p.limit;(iii)themaximumantennagainpermittedfordevicesintheband5725‐5850MHzshallbesuchthattheequipmentstillcomplieswiththee.i.r.p.limitsspecifiedforpoint‐to‐pointandnon‐point‐to‐pointoperationasappropriate;and(iv)theworst‐casetiltangle(s)necessarytoremaincompliantwiththee.i.r.p.elevationmaskrequirementsetforthinSection6.2.2(3)shallbeclearlyindicated.(v)Usersshouldalsobeadvisedthathigh‐powerradarsareallocatedasprimaryusers(i.e.priorityusers)ofthebands5250‐5350MHzand5650‐5850MHzandthattheseradarscouldcauseinterferenceand/ordamagetoLE‐LANdevices.Avertissement:Leguided’utilisationdesdispositifspourréseauxlocauxdoitincluredesinstructionsprécisessurlesrestrictionssusmentionnées,notamment:(i)lesdispositifsfonctionnantdanslabande5150‐5250MHzsontréservésuniquementpouruneutilisationàl’intérieurafinderéduirelesrisquesdebrouillagepréjudiciableauxsystèmesdesatellitesmobilesutilisantlesmêmescanaux;(ii)legainmaximald'antennepermispourlesdispositifsutilisantlesbandesde5250à5350MHzetde5470à5725MHzdoitêtreconformeàlalimitedelap.i.r.e;(iii)legainmaximald'antennepermis(pourlesdispositifsutilisantlabandede5725à5850MHz)doitêtreconformeàlalimitedelap.i.r.e.spécifiéepourl'exploitationpointàpointetl’exploitationnonpointàpoint,selonlecas;(iv)lespiresanglesd’inclinaisonnécessairespourresterconformeàl’exigencedelap.i.r.e.applicableaumasqued’élévation,eténoncéeàlasection6.2.23),doiventêtreclairementindiqués. (v)Deplus,lesutilisateursdevraientaussiêtreavisésquelesutilisateursderadarsdehautepuissancesontdésignésutilisateursprincipaux(c.‐à‐d.,qu’ilsontlapriorité)pourlesbandes5250‐5350MHzet5650‐5850MHzetquecesradarspourraientcauserdubrouillageet/oudesdommagesauxdispositifsLAN‐EL.

Navigation menu