Seiko Epson FBJ26H006 11n+BT Combo Module User Manual rev

Seiko Epson Corporation 11n+BT Combo Module Users Manual rev

Users Manual rev

COMPANY CONFIDENTIAL 1FuGui Precision Industrial (Nanning) Co., LTD. No.51, Tongle Boulevard, Shajing, Jiangnan District, Nanning, P. R. CHINA Tel: 86-0771-2168888 Ext:30726 FAX: 86-0771-2168888 Ext:64886 Function 802.11b/g/n(1x1) WiFi+ Bluetooth 2.1/4.2 Combo Project Name 11n+BT Combo Module Part No. J26H006 Delivery Specification Rev. 1.1 Prepared by Reviewed by Approved by J26H006 Delivery Specification
COMPANY CONFIDENTIAL 2 Content 0. REVISION HISTORY ........................................................................ 31. INTRODUCTION ........................................................................... 41.1 SCOPE ................................................................................... 41.2 FUNCTION ................................................................................ 41.3 SPECIFICATION BY MODEL ................................................................... 41.4 MODULE WEIGHT .......................................................................... 41.5 PRODUCT REGULATORY ..................................................................... 52. MECHANICAL SPECIFICATION ............................................................. 52.1 MODULE MECHANICAL DRAWING .............................................................. 52.2 USB CONNECTOR .......................................................................... 72.3 RF SWITCH CONNECTOR .................................................................... 93.USB CONNECTOR PIN-OUT ................................................................. 95. ELECTRICAL SPECIFICATION ............................................................. 105.1 RECOMMENDED OPERATING CONDITION ....................................................... 105.2 RF CHARACTERISTICS ..................................................................... 105.3 CURRENT CONSUMPTION ................................................................... 115.4 EFUSE CONTENT .......................................................................... 125.5 POWER ON/OFF SEQUENCE ................................................................. 145.6 FLOATING PIN STATUS ...................................................................... 165.7 ANTENNA SPECIFICATION ................................................................... 165.8 OPERATING SYSTEM SUPPORT .............................................................. 186. LABEL INFORMATION .................................................................... 196.1 MAC-ID LABEL LASER MARKING ............................................................. 196.2 REGULATORY LABEL ....................................................................... 206.3 PANEL LABEL ............................................................................. 206.4 CARTON LABEL ........................................................................... 216.5 PALLET LABEL ............................................................................ 217. PACKING INFORMATION .................................................................. 237.1 MODULE SCAN GUIDE ...................................................................... 258. RELIABILITY ............................................................................. 268.1 HARDWARE RELIABILITY TEST ............................................................... 268.2 PACKAGE RELIABILITY TEST (TBD) ........................................................... 279. QUALITY ................................................................................. 279.1 QC FLOW CHART ......................................................................... 279.2 VISUAL INSPECTION STANDARD .............................................................. 289.3 PVT MFG. TEST PLAN ..................................................................... 28
COMPANY CONFIDENTIAL 3 0. Revision History Date Document revision Version Author Change Description 2017/08/25 1.0 NA Fly Huang Initial released 2017/9/20 1.1 NA Fly Huang Update 4.1 Schematic Part
COMPANY CONFIDENTIAL 4 1. Introduction Project Name: J26H006 This documentation describes the engineering requirements specification of RTL8723DU 11n+BT Combo Module. It is a confidential document of Foxconn. 1.1 Scope This module design is based on Realtek RTL8723DU chipset .The RTL8723DU is a highly integrated single-chip 802.11b/g/n 1T1R WLAN, and an integrated Bluetooth 2.1/4.2 single chip with USB 2.0 multi-function. It provides a complete solution for a high performance integrated wireless LAN and Bluetooth controller. The RTL8723DU WLAN baseband implements Orthogonal Frequency Division Multiplexing (OFDM) with 1 transmit and 1 receive path and is compatible with the 802.11n specification. Features include one spatial stream transmission, spatial spreading, and transmission over 20MHz bandwidth. This module support antenna diversity for better coverage This specification is applied at the product to deliver to Seiko Epson group (including an overseas subsidiary),and EMS, the outsourcer to utilize in the company. 1.2 Function z USB2.0 interface for WLAN and BT. z Support single-band WLAN 20MHz at 2.4GHz z Support BT4.2+HS , BLE and be backwards compatible with BT1.x,2.x+EDR. z Support BT-WLAN coexistence. z Support Antenna diversity. z GP compliance In accordance with SEIKO EPSON Group's requirements specified by the latest “Green Purchasing Standard for Production Materials", all production materials shall conform to SEIKO Epson’s policy about chemical substances already banned or to be eliminated and shall be controlled by "4M Variation Management". 1.3 Specification by Model LOT No. EPSON Parts Name EPSON Parts Code Foxconn Parts Name Connecter Regulatorycountries US W I RemarkJ26H006.C01 2187150-00 J26H006.00 WTB (Right Angle) None C 0 A A PVT J26H006.B01 2187151-00 J26H006.02 BTB (Vertical) None B 0 A A PVT 1.4 Module Weight
COMPANY CONFIDENTIAL 5 Module Weight Model J26H006.C01 J26H006.B01Sample 1 2.6g 2.6g Sample 2 2.6g 2.6g Sample 3 2.6g 2.6g 1.5 Product Regulatory Regulatory countries/IDs Country Approval Certification Certification No. Remark USA NO FCC TBD Canada NO IC TBD EU NO CE TBD Japan NO TELEC TBD …. 2. Mechanical Specification 2.1 Module Mechanical Drawing Ⅰ.For J26H006.C01: Typical module dimension (W x L) is 28mmx28mm.
COMPANY CONFIDENTIAL 6 Unit: mm The tolerance for each mechanical dimension Note1: The max shift degree of WTB connector is 2.3degree. Ⅱ. For J26H006.B01: Typical module dimension (W x L) is 28mmx28mm.
COMPANY CONFIDENTIAL 7 Unit: mm The tolerance for each mechanical dimension Note2: The max shift degree of BTB connector is 2.3degree. 2.2 USB Connector Ⅰ.For J26H006.C01:WTB Connector ¾ 4pin, 2.0mm pitch, Right angle type ¾ Part number: HFK2040-G1C3K-8F ¾ Vendor: Foxconn FIT ¾ High temperature plastic PA9T which meet SMT reflow profile(PIP)
COMPANY CONFIDENTIAL 8 Ⅱ. For J26H006.B01: BTB Connector ¾ 4pin, 2.0mm pitch, Vertical type ¾ Part number: HFL1040-G1C3K-9F ¾ Vendor: Foxconn FIT ¾ High temperature plastic PA9T which meet SMT reflow profile(PIP)
COMPANY CONFIDENTIAL 92.3 RF Switch Connector ¾ Part number: MM8030-2610RJ3 ¾ Vendor: Murata 3.USB Connector Pin-out Pin Number Pin Name I/O Description 1 VDD33 I DC 3.3V source input 2 USB_DN I/O USB D- Signal 3 USB_DP I/O USB D+ Signal 4 GND -- Ground
COMPANY CONFIDENTIAL 105. Electrical Specification 5.1 Recommended Operating Condition Symbol Condition Min. Typ. Max Unit 3.3v(VDD33) Respect to GND 3.0 3.3 3.6 V Max Ripple on Supplied Voltage 3.3V @full loading 95 330 mVpp DC current @3.3V at full loading (WiFi @TX and BT @ TX) - 257 500 mA USB Suspend current -- 3.6 6 mA Operating Temperature 0 +25 +70 ℃ Storage Temperature -25 25 +85 ℃ Operating Humidity 30~50% 90% RH ESD HBM(contact) Standard:MIL-STD-883H +/-1.5 KV ESD (indirect) Standard:EN61000-4-2 +/-4 KV Function operation is not guaranteed outside of this limit, and operation outside of this limit for extended period can adversely affect long-term reliability of the device. 5.2 RF Characteristics All typical performance specification are measured at RF connector port operating in +25℃@3.3V Note3: The target power table is just defined for board level. Note4: Power is compliance with EVM IEEE spec based-on the parameter “disable full packet” WiFi Standard IEEE802.11b/g/n Data Rate 802.11b: 11, 5.5, 2, 1 Mbps; 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: HT20 mode: MCS0~MCS7,up to 72.2Mbp Bandwidth 20MHz for 2.4GHz, Modulation Techniques 802.11b: CCK, DQPSK, DBPSK 802.11g: 64QAM,16QAM, QPSK, BPSK 802.11n: 64QAM,16QAM, QPSK, BPSK Operating Frequency 2.412GHz~2.462GHz, Media Access Control CSMA/CA with ACK Transmit Output Power 11b CCK_11Mbps: 23dBm+/-1.5dB 11g 54Mbps: 25dBm+/-1.5dB 11n HT20_MCS7: 25dBm+/-1.5dB Frequency error +/-10ppm Receiver Sensitivity 11b 11Mbps: -83dBm@PER<=8% 11g 54Mbps: -70dBm@PER<=10% 11n HT20 MCS7: -67dBm@PER<=10% Radio Modulation FHSS Operating Frequency 2.402GHz ~ 2.480GHz Channel Numbers 79 channels with 1MHz BW BDR Transmitter Output Power 0~+14dBm BDR Power Control 2dB≤Power Control Step≤8dB BDR Initial Carrier Freq. Tolerance ≤ ± 75 kHz
COMPANY CONFIDENTIAL 11 BT BDR Carrier Frequency Drift Drift Rate/50us <±20kHz DH1: +/- 25kHz,DH3: +/- 40kHz,DH5: +/- 40kHz BDR Modulation Characteristics 140kHz ≤ ∆f1avg ≤175kHz ∆f2max ≥115kHz ∆f2avg/∆f1avg ≥0.8 BDR Maximum Receiver Signal -20dBm@ BER <= 0.1% at 1Mbps BDR Sensitivity -85dBm @ BER <= 0.1% at 1Mbps EDR Relative Power P[GFSK]-4dB<P[DPSK]< P[GFSK]+1dB EDR Stability and Mod Accuracy -75 kHz <ωi < 75 kHz -10kHz<ω0 <10kHz RMS DEVM<=0.13 for all 8DPSK @3Mbps Peak DEVM<=0.25 for all 8DPSK @3Mbps 99% DEVM<=0.2 for 99% 8DPSK @3Mbps BDR Frequency Range FL>2.4GHz,FH<2.4835GHz EDR Sensitivity -80dBm@BER <= 0.01% at 2Mbps -80dBm@BER <= 0.01% at 3Mbps BDR TX Output Spectrum -20dB Bandwidth ≤1MHz LE Output Power 0~+14dBm LE Modulation Characteristics 225kHz ≤ ∆f1avg ≤275kHz; ∆f2max ≥185kHz for at least 99.9% test packets; ∆f2avg/∆f1avg ≥0.8 LE Carrier frequency offset and drift Carrier frequency offset: ±150kHz Carrier Drift: ≤50kHz Drift rate: ≤20kHz/50us LE Receiver Sensitivity -90dBm@PER <= 30.8%,GFSK,1Mbps 5.3 Current consumption 5.3.1 WiFi current consumption Remark: Base-on Win7 OS to do WiFi only throughput tests. The Standby mode means “module connect to AP only, and don’t transfer the data.” 5.3.2 Bluetooth current consumption Test Condition Avg. Current at 3.3V Unit Min Typ. Max Idle mode( power on only) 63.7 mA BT BDR 1DH5 TX@6dBm 115 mA BT BDR 1DH5 Rx 87 mA BT EDR 2DH5 TX@6dBm 116 mA BT EDR 2DH5 Rx 87 mA BLE TX@6dBm 78 mA BLE Rx 87 mA Standby mode* 69 mA Remark: The result is base-on Win7 driver. The Idle mode means “ module power on only, don’t open any testing tool” The standby mode means “module connect to BT device only, and don’t transfer the data”
COMPANY CONFIDENTIAL 12 5.4 eFuse Content 5.4.1 WiFi eFuse Revision Note EEPROM Version Chang Lists Owner Date Remark address Value for WiFi Efuse address 0xC4, change value from 0x00 to 0x01 Fly. Huang 2017/08/11 PVT 0xC4 0x01 eFuse for WiFi eFuse addressaddress 0 1 2 3 4 5 6 7 8 9 A B C D E F Path A cck TX calibration power index0 29 81007C01880700A0 04 EC3512C0A2D81 161413121212191817 16 1602FFFFFFFF Path A 11n HT40 mcs7 TX calibration2 FF FFFFFFFFFFFFFF FF FF FFFFFFFFFFFF3 FF FFFFFFFFFFFFFFFF FF141414131212 0x1B Path A power diff index (offset) fixed value4 17 171716 1502FFFFFF FF FFFFFFFFFFFF5 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Path B cck TX power calibration index6 FF FFFFFFFFFFFFFF FF FF FFFFFFFFFFFF7 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Path B 11n HT40 mcs7 TX calibration power index8 FF FFFFFFFFFFFFFF FF FF FFFFFFFFFFFF9 FF FFFFFFFFFFFFFF FF FF FFFFFFFFFFFF 0x45 Path B power diff index(offset) fixed valueA FF FFFFFF FFFFFFFF FF FF FFFFFFFFFFFFB FFFFFFFFFFFFFFFF20 1F1A000000FFFF 0xB8 channel plan:0x20 fixed valueC FF292050010000FF00 FF11FFFFFFFFFFD FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFF 0xB9 Crystal calibration dataE FF FFFFFFFFFFFFFF FF FF FFFFFFFFFFFFF FF FFFFFFFFFFFFFFFF FF FFFFFFFFFFFF 0xBA Thermal meter10 DA 0B 23 D7 E7 46 07 D8 0F 99 16 57 F3 09 03 5211 65 61 6C 74 65 6B 16 03 38 30 32 2E 31 31 6E 20 0xC3 Antanna setting fixed value12 57 4C 41 4E 20 41 64 61 70 74 65 72 00 FF FF FF13 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xC4 EEPROM version: 0x01 fixed value14 FF FF FF FF FF FF FF 0F FF FF FF FF FF FF FF FF15 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x100~0x101 VID:0x0BDA fixed value16 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF17 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x102~0x103 PID:0xD723 fixed value18 FF FF FF FF FF FF FF FF 6B 41 22 DD 53 59 86 D119 70 8F 00 00 10 16 40 00 FC 8C 00 11 9B 00 00 0A 0x107~0x10CWiFi MAC: D80F991657F3 consistency1A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00~0x0F other config fixed vuale1C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xBB~0xBD1D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xC1~0xC21E FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xC4~0xC61F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0xC8~0xCa0x104~0x12C0x1470x188~0x19F Note: USB Vendor ID (VID): 0x0BDA USB Product ID (PID): 0xD723
COMPANY CONFIDENTIAL 13 5.4.2 BT eFuse
COMPANY CONFIDENTIAL 14 eFuse for BTaddress 0 1 2 3 4 5 6 7 8 9 A B C D E F Efuse address description Value0 FFFFFFFFFFFFFF FF FF FF FF FF FFFFFFFF1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x44~0x49 BT MAC address F8DA0C5D2618 Not fixed value2 FFFFFFFFFFFFFF FF FF FF FF FF FFFFFFFF3 FFFFFFFFFFFFFF FF FF FF FF FF FFFFFFFF 0xDA~0xDB default value from IC 10,D8 Fixed value4 FFFFFFFF18 265D0CDAF8 FFFF FFFFFFFF 0x1F4~0x1F7 default value from IC 94,80,06,00 Fixed value5 FFFFFFFFFFFFFF FF FF FF FF FF FFFFFFFF6 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x15B~0x15E BT TX power calibration index Not fixed value7 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x15B 1M power index 1E8 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x15C 2M power index 1F9 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x15D 3M power index 1FA FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x15E LE power index 1FB FFFFFFFFFFFFFF FF FF FF FF FF FFFFFFFFC FFFFFFFFFFFFFF FF FF FF FF FF FFFFFFFF 0x15F BT Tx gain step 01 Fixed valueD FFFFFFFF FFFFFF FF FF FF 10D8FFFFFFFFE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x188~0x189 BT Thermal value index 00,1F Not fixed valueF FFFFFFFFFFFFFF FF FF FF FF FF FFFFFFFF10 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x1CE~0x1CF BT Antenna info F7,3E Fixed value11 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF12 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x1E4~0x1E5 BT Modem tx gain compensation33,33 Not fixed value13 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF14 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x1E6 BT Xtal cap 1E Not fixed value15 FF FF FF FF FF FF FF FF FF FF 27 1E 1F 1F 1F 0116 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF17 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF18 FF FF FF FF FF FF FF FF 00 1F FF FF FF FF FF FF19 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1C FF FF FF FF FF FF FF FF FF FF FF FF FF FF F7 3E1D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF1E FF FF FF FF 33 33 1E FF FF FF FF FF FF FF FF FF1F FF FF FF FF 94 80 06 00 FF FF FF FF FF FF FF FF20 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF21 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF22 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF23 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF24 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF25 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF26 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF27 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF28 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF29 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2A FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2E FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF2F FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF30 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF31 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF32 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF33 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF31 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF35 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF36 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF37 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF38 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF39 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF40 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF41 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF42 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF43 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF44 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF45 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 5.5 Power On/Off Sequence 5.5.1 Power On Sequence
COMPANY CONFIDENTIAL 15 Ton: The main power ramp up duration Tpor: The power on reset releases and power management unit executes power on tasks Tattach: USB attach state Item Min. Typ. Max Uint Ton 0.2 1.5 5 ms Tpor -- 2 10 ms Txtal -- 1.5 8 ms Tattach 100 250 -- ms T1v25 -- 2 5 ms 5.5.2 Power Off Sequence Toff: The main power ramp down duration (from 3.3V fall to 0.7V). VDD33(3.3V) is coming from system, different DC power supply’s load cap value may cause the different discharge time. Treset: To assert Chip reset, keep the VDD33 under 0.7V for 100ms Item Min. Typ. Max Unit Toff -- 16 1000 ms Treset 100 -- -- ms
COMPANY CONFIDENTIAL 165.6 Floating pin status 5.7 Antenna Specification
COMPANY CONFIDENTIAL 17
COMPANY CONFIDENTIAL 18 5.8 Operating System Support Support the Win7, Win8.1, Win10, Linux operating system on normal driver
COMPANY CONFIDENTIAL 196. Label Information 6.1 MAC-ID Label Laser Marking All content is engraved by laser into shielding cover. Ⅰ.For J26H006.C01 Ⅱ. For J26H006.B01
COMPANY CONFIDENTIAL 206.2 Regulatory Label Regulatory label was printed on PCB Bottom side for PVT, it will be updated after get the official regulatory ID. 6.3 Panel Label
COMPANY CONFIDENTIAL 216.4 Carton Label Ⅰ.For J26H006.C01 Ⅱ. For J26H006.B01 6.5 Pallet Label Ⅰ.For J26H006.C01
COMPANY CONFIDENTIAL 22 Ⅱ.For J26H006.B01
COMPANY CONFIDENTIAL 237. Packing Information I:For J26H006.C01 II:For J26H006.B01
COMPANY CONFIDENTIAL 24 The detailed dimension of the tray z The hollow length and side value z The distance between module and module, and between module and outline of tray
COMPANY CONFIDENTIAL 257.1 Module Scan Guide 1. Taking the module in declining way about 45° to prevent the shielding reflecting the lightness; 2. Taking the scanner and turning right in 45° angle； Note: The distance between scanner and module is about 5-8cm
COMPANY CONFIDENTIAL 268. Reliability 8.1 Hardware Reliability Test
COMPANY CONFIDENTIAL 27 8.2 Package Reliability Test (TBD) The product shall pass below package reliability test plan. No Test Items Description Test Criteria Reference Qty' Result1 Atmospheric Conditioning Test Temlpearture: 38℃Test humidity: 85%R.H.Dwell time: 72hoursNo obvious visible damageon boxes after temperatureand humidity test. ISTA-2A 1carton TBD2 Static Compression TestUnits are packagedCompression load=Wt x (S - 1) x FWt:Total weitht of the packaged-procuctS:Total number of packaged-products in a stack1:Represents the bottom container in a StackCompression Test duration:1hourNo obvious visible damageon boxes after staticcompression test. ISTA-2A 1carton TBD3 Random Vibration TestThe following breakpoints shall be programmed into the vibrationcontroller to produce the acceleration versus frequency profile (spectrum)below with an overall Grm s level of 1.15.Face 3: 30mins, Face1: 10mins, Face 2 or 4: 10mins, Face 5 or 6: 10mins No obvious visible damageon boxes after randomvibration test. ISTA-2A 1carton TBD4Package drop testThe test drop height varies with the weight of the packaged-product.Find the weight of the packaged-product in the following chart todetermine a drop height or an equivalent impact velocity tobe used for a substituted drop:No obvious visible damageon boxes after packageddrop test. ISTA-2A 1carton TBD5 Fix displacement TestDisplacement:25mmDuration:14200times No obvious visible damageon boxes after fixeddisplacement test. ISTA-2A 1carton TBD 9. Quality The product quality must be followed-up by Foxconn factory quality control system. In accordance with SEIKO EPSON Group's requirements specified by the latest “Electronic Component Quality Requirements Standard" and "WiFi+BT Combo Module Quality Requirements Specification Rev.B" , the product shall be managed Quality control. 9.1 QC Flow Chart
COMPANY CONFIDENTIAL 289.2 Visual Inspection Standard 9.3 PVT Mfg. Test Plan Date Version Author Change Description 2017/08/3 V1.7 Fly Huang Initial released
COMPANY CONFIDENTIAL 29
COMPANY CONFIDENTIAL 30
COMPANY CONFIDENTIAL 31
COMPANY CONFIDENTIAL 32
COMPANY CONFIDENTIAL 33
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: BKMFBJ26H006”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement:
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains IC: 1052C-J26H006”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 1052C-J26H006". 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 模組認證： 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。 2. 系統廠商應於平台上標示「本產品內含射頻模組： XXXyyyLPDzzzz-x」字樣。 「電磁波曝露量MPE標準值1mW/cm2，本產品使用時建議應距離人體 20 cm」

Navigation menu