Selex ES 774-0850NB VS3000 GTW/ 806-870 User Manual VS3000 FPG3 MAN 0205 01 QRG A4 pm6

Download:
Mirror Download [FCC.gov]
Document ID	1761924
Application ID	ZljDe1jH01Ht7dk1fFtSOw==
Document Description	safety instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.82kB (35264 bits)
Date Submitted	2012-08-08 00:00:00
Date Available	2012-08-08 00:00:00
Creation Date	2012-08-06 14:24:40
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2012-08-06 14:24:40
Document Title	VS3000-FPG3 - MAN-0205_01 QRG (A4).pm6
Document Creator	PageMaker 6.0
Document Author:	Pisanim

P/N MAN-0698/01.01
P/N MAN-0698/01.01
Safety recommendations
This equipment is marked
Carefully read all of the cautions and warnings before using the
radio:
According to the requirements specified in the R&TTE directive
1999/5/EC and the Commission Decision 6th April 2000, the
EC marking is accompanied by the Class II equipment class
identifier.
The equipment (in the 380÷430 MHz and 410÷470 MHz
versions) is intended for sell and use in AT, BE, CY, CZ, DK, EE,
FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, SK, SI, ES,
SE, GB.
This equipment requires authorization or license for use.
This equipment operates on frequency bands non-harmonised
in the EU.
This equipment can also be used worldwide where the
equipment is approved for use.
FCC APPROVAL
For US owners only
FCC approval
VS3000 GTW/806-870 vehicular equipment complies with
Part 15 of the FCC/Federal Communication Commission
regulations.
Operation is governed by the following:
FCC ID:
X5Y774-0850
FCC ID:
X5Y774-0850NB
These devices comply with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- these devices may not cause harmful interference, and
- these devices must accept any interference received,
including interference that may cause undesired
operation.
Any unauthorized modifications or changes to these
devices could void the user's authority to operate these
devices.
Note:
FCC ID X5Y774-0850 and FCC ID X5Y774-0850NB apply to
VS3000 GTW/806-870 versions only.
WARNING
• Do not use the radio equipment for uses different than
those indicated in the manual.
• For a correct use of the radio equipment, read what
is listed in this user's guide.
• Protect the radio from sprinklings of water and/or other
liquids and from dust.
• Be careful not to damage the vehicular radio when
cleaning the vehicle.
• Do not place the audio accessories above the airbags
or in their area of action. If the airbag is activated, it
may not swell correctly and/or hurl the audio accessories, with great force, inside the passenger compartment where the vehicle occupants are located.
• Do not use the vehicular radio if the antenna and/or the
antenna cable are damaged.
• The electronic devices are sensitive to electromagnetic interference (EMI) if not adequately shielded, designed or configured differently for electromagnetic fields
immunity.
If electromedical equipment (ex. pace-makers, acoustical equipment, etc.) is used together with the vehicular radio, make sure that it is adequately shielded
from external electromagnetic fields.
• Install the vehicular radio following the instructions
given in the installation guide. The mounting screws
can damage cables and wires that run under some
mounting surfaces in the vehicle. Be careful to avoid
mounting the bracket above these locations. The equipment must be installed in such a way that it complies
with the national regulations in effect.
• Carry out the maintenance interventions on the vehicular radio following the instructions given in the technical handbook.
• Follow all accident prevention standards when carrying out maintenance/installation interventions on the
vehicular equipment and use the proper tools (spanners, screwdrivers).
• First and second maintenance level interventions on
the equipment are to be carried out by authorized
technicians only.
Third maintenance level interventions are to be carried
out by SELEX technicians only. The maintenance levels are defined in the technical manual.
P/N MAN-0698/01.01
• Use only original accessories and spare parts, or
approved by the manufacturer, suitable for the vehicular radio.
The use of different accessories and/or spare parts
(earphone, antenna, etc.) makes the safety and
electromagnetic compatibility certifications to be valid
no more and it could lower the user safety level and/
or generate electromagnetic fields that exceed the
accepted limits.
• The emergency call is a priority type call.
The vehicular radio, like all mobile telephony equipment, operates with radio frequency signals, therefore,
the forwarding of the call depends on the network
coverage at the moment of the call.
•If you need send an emergency call, keep pressed the
emergency button for at least 2 seconds, when the
radio is switched on.
Relating to the radio setting (from PRP), two cases
may occur if the transmission is inhibit:
a) the emergency call is not sent; it is necessary to
disable the Tx Inhibit function from radio menu to
forward a call (even if the call is an emergency
call).
b) the emergency call is sent and automatically the Tx
Inhibit function is disabled; from radio menu it is
possible to recover the Tx Inhibit function again.
• The E-WHERE is only suitable for vehicles with the
negative pole of the battery earthed to bodywork. Installation on other vehicles can cause faults and damage/fire to cables.
• Do not take the radio into environments that have a
potentially explosive atmosphere (ex. fuel storage siWARNING
tes, filling stations, etc.).
• After the radio has been trasmitting for a long period,
it may reach high temperatures: in such a case avoid
WARNING
touching the radio shell.
The radio complies with all product specifications and great
care is taken by the manufacturer so that user safety, as far
as the effects of electromagnetic waves on health are concerned, is guaranteed within the limits established by the international specifications.
P/N MAN-0698/01.01
To comply with FCC RF exposure compliance requirements, a separation distance of at least 72 cm must be
maintained between the antenna of this device and all
persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.”

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:680e20ec-fa51-4c03-a749-38ff4d260304
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2012:08:06 14:24:40+02:00
Creator Tool                    : PageMaker 6.0
Modify Date                     : 2012:08:06 14:24:40+02:00
Document ID                     : uuid:f4fdb4dc-aa1b-4655-8f80-7fae1c610602
Format                          : application/pdf
Title                           : VS3000-FPG3 - MAN-0205_01 QRG (A4).pm6
Creator                         : Pisanim
Author                          : Pisanim

EXIF Metadata provided by EXIF.tools